Delhi Development Authority Tender

2 x 6 sq.mm +1 x 6 sq.mm earth wire

Supplying and fixing of following piano type switch/socket on the existing switch box/cover i/c connection etc as required . (a) 15/16 Amp. switch

(b) 6 pin 15/16 Amp socket outlet

Supplying & fixing metallic box of following size on surface or in recess with phenolic laminated sheet cover in front etc. as reqd. i/c cutting for switches / socket, fixing of piano type switch, connection testing etc. as reqd. (a) 150 mm X 150mm X 60mm deep

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85,Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc.complete as required.

Supplying & fixing 5 amps to 32 amps rating, 240/415 volts, 10KA“C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as reqd. (a) Single Pole

(b) Double Pole

Supplying and fixing the 36 watt LED batten wuth extruded aluminium body with PC diffuser suitable for 200-400V ,50 Hz AC supply LED batten complete in all respect ,i/c painting , numbering ,connection testing etc as required.

Supply and fixing of 45 watt LED street light fittings of suitable for IP-66 operation on 240 volts, 50 HZ AC supply, complete with connections, testing etc. as reqd.

Supplying and fixing following way ,horizontal type ,single pole and neutral,sheet steel MCB distribution board ,415 V on surface/recess complete with tinned copper bus bar,neutral bus bar, Earth bar, din bar interconnection powder painted including earthing etc as required (but without MCB/RCCB/isolator) 16 way), Double door

Supplying and fixing following rating, four pole, (three phase and neutral)415 volt residual current circuit breaker (RCCB) having a semsitivity current 30ma in the existing MCBDB complete with connections testing and commissioning as required. a) 63 A

Supplying of following size of XLPE insulated / PVC sheathed al. Conductor armourd power cable of 1.1 KV grade i/c making, connection testing etc. as reqd. a) 2Cx16 sq.mm

Supplying and laying of following size DWC HDPE pipe ISI marked alongwith all accessories like socket,bend,couplers etc conforming to IS 14930 Part II complete with fitting and cutting,jointing etc.direct in ground/RCC (75 cm below ground level in kaccha portion/350 mm below in pucca portion as per site requirement including excavation and refilling the trench but excluding sand cushioning and protective covering etc ,complete as required.a).90mm dia(OD-90mm & ID-76mm nominal).

Supplying & fixing of Galvanized single arm bracket minimum 500 mm long on made out of suitable sized round pipe B-Class on octagonal pipe (3.20 mm Thick), 48 mm NB with 300 mm long galvanized overhang with tightening bolts etc. as reqd. Tilt angle shall be around 10 degree. a)Single arm bracket

Laying of one no. PVC insulated and PVC sheated/XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/Metal pipe as required. Up to 35 sq. mm

Supplying, Installation, Testing and Commissioning of submersible pump set suitable for 415 volt+/-10%,50 Hz ,3 phase AC supply with following duties alongwith test certificate complete as required. (a) Head Range- 11-28 m (b) Discharge -425-155 LPM (c) No of stages-06

Supply and Laying of 3x2.5 sq.mm flat flexible Copper cable suitable for 3 phase,50 Hz AC supply submersible pump set in accordance with IS:694 i/c testing etc complete as required.

Supplying, erection,testing and commissioning of HOT Dip galvanized octagonal steel pole of 7 mtr height and made of minimum 3 mm thick sheet, having bottom 135mm OAF & top 70 mm OAF provided with welded base plate of size 225 mm x 225 mm x 16 mm thick with built in connector control box complete with window sleeve type cover / Full Vertical Window Cover arrangement at a height of 1.0 mtr. from the base complete as per technical specifications attached including following accessories with mounted inbuilt control box having flush cover with 2 nos. mounting strips with tapped holes on existing RCC foundation with bolt and nuts, making connections, interconnections with suitable size of copper wire with thimble/lugs in the connector box, earthing, marking/ numbering of pole etc. complete as per technical specifications attached including following accessories with mounted inbuilt control box. (a). 6mm thick phenolic laminated/Bakelite sheet inside the window mounted on the existing mounting strips inside the flush door. (b). 1 no. 63 Amp terminal block suitable for following conductor / cable, fixed on DIN channels i/c providing and fixing DIN channel of suitable length – on the existing phenolic laminated / Bakelite sheet. (i) 25 sq mm conductor – 2 nos. (incoming and outgoing looping) (ii) Terminal suitable for 6 SWG GI wire / 2.5 sq mm wire. (c). 6 Amp, SP MCB,10 KA, ‘C’ Series – 1 no. including mountings on DIN channel, Earth stud 2 Nos. welded at suitable height i/c washers, springs washers & nuts etc. (d) Suitable arrangement for saddling of incoming / outgoing cables.

Providing and laying in position, M25 reinforced cement concrete foundation of size 500 mm (L) x 1400 mm (D) and 500 mm (W) i/c excavation of earth, providing cutting, bending and placing in position reinforcement of cold twisted bar of 12 mm dia. 1600 mm long (approx.) – atleast 8 Nos. and reinforcement ring of cold twisted bar of 10 mm dia. 2000 mm long (approx.)- atleast 10 Nos. (with 140 mm spacing) i/c supplying of 4 Nos. M-24 x 750 mm long (150 mm top threaded & 250 mm top galvanized portion) M.S foundation bolt (EN 8-grade) with 4 Nos. nuts and 4 Nos. washer, bolt along with 2 Nos. templates/Anchor plate of size 225 mm x 225 mm x 16 mm thick having 4 Nos. 24 mm dia. holes to match with PCD of poles base plate with positioning of foundation bolts and providing 63 mm (OD) 2 Nos. DWC pipe for cable entry and exit with complete as required for 7 m pole.

Supply, installation, testing & commissioning of floor mounting, totally enclosed, compartmentalized, cubical, dust, vermin proof and outdoor type Feeder pillar having size of 900mm x 900mm x 300mm fabricated out of 2 mm thick cold rolled carbon annealed, sheet steel, internally strengthened with angle iron frame work with following incoming and outgoing feeders (fabricated out of 2 mm CRCA Sheet steel) including supplying and mounting including making connections/inter-connections with lugs / glands crimping tools, testing and commissioning of following items inside the panel.(IP-54) A) INCOMER i) 63 A TP+N MCCB (25 KA) with On / Off indications in the front (ISI marked) -1 No. ii) LED Type Phase indicating - (R,Y& B) Lamps provided with 2A SP MCBs for protection having lens and lamp openable from the top.-3 nos. iii)1 Set of push buttons for ON/ OFF and selective switching operation. iv) Voltmeter (0-500 V) with selector switch. v) Ammeter (0-100 A) with selector switch. B) OUTGOING i) Upto 7.5 H.P DOL Starter with Contactor & SPPR etc. ii) 40 Amp TPN MCB - 1 No. iii) SP MCB 16A- 1 no. and DPMCB 16A - 2 no. for light, Danger Notice Plate-1No. BUSBAR i) Bus bar with 100 A rating TP+N(Aluminium ) not less than 400 mm long, brass holder for LED bulb