Delhi Development Authority Tender

Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. (a) All kinds of soil

Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing. (a) 1:1.5:3 (1 Cement: 1% coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. (a) 40 mm thick with 20 mm nominal size stone aggregate

Providing and fixing open air gym equipments made of G.I. pipe frame of 114 mm & 40mm OD 'C' class with power coated on ground with concrete 1:1.5:3 grade and j shaped bolts of 18 mm thickness (High tensile steel nut & bolts) covered with base plate cover all complete as per direction of engineer-in-charge. (i) Air walker L-1100 mm, B-550 mm , H-1480 mm

(ii) Double Sit Up station L-1500 mm, B-1150 mm , H-650 mm

(iii) Air Swing L-1150 mm, B-900 mm , H-1250 mm

(iv) Horse Rider Station L-1700 , B-1300 mm, H-1350 mm

(v) Stair Stepper with Twister L-1800 mm, B-700 mm , H-2000 mm

(vi) Double Leg Press L-1000 mm, B-450 mm, H-1400 mm

(vii) Arm Wheel L-850 mm , B-800 mm , H-1800 mm

(viii) Excercising Bar L-1800 mm , B-550 mm , H-1560 mm

(ix) Double Cross Walker L-1100 mm , B-600 mm , H-1600 mm

(x) Triple Twister L-1700 mm , B-1300 mm , H-1300 mm

(xi) Rowing Machine L-1280 mm , B-800 mm , H-1150 mm

(xii) Elliptical Exerciser L-1200 mm , B-540 mm , H-1600 mm

(xiii) Weight Assisted Shoulder Press L-1371 mm , B-1638 mm , H-1181 mm

(xiv) Weight Assisted Pull Down L-1130 mm , B-1701 mm , H-2235 mm

(xv) Weight Assisted chest press L-635 mm , B-1409 mm , H-1371 mm

(xvi) Weight Assisted Rowing Machine L-635 mm , B-1409 mm , H-1371 mm

Providing and fixing Double arc swing made of Mild steel pipe 75 mm OD powder coated of size 12' x 3.5'x 8.5' and fixed with Cement concrete 1:1.5:3 all complete as per direction of the engineer-in-charge.

Providing and fixing Double plank 4 seater sea saw made of Mild steel pipe 60 mm OD powder coated of size 6' x 6' x 2.5' fixed with Cement concrete 1:1.5:3 all complete as per direction of the engineer-in-charge.

Providing and fixing revolving platform made of Mild steel and dia. 5 feet fixed with Cement concrete 1:1.5:3 all complete as per direction of the engineer-in-charge.

Providing and fixing sea horse spring rider made of Mild steel and FRP of size 2.5' x 2.5' x 2.5' fixed with Cement concrete 1:1.5:3 all complete as per direction of the engineer-in-charge.

Providing and fixing multi play station made of Mild steel and FRP consisting of one spiral slide, one wave slide, one tunnel slide, FRP railing, walking bridge, towers with canopy, entry ledder of size 22' x 23' x 12' fixed with Cement concrete 1:1.5:3 all complete as per direction of the engineer-in-charge.

Providing and laying synthatic cushioned acrylic surfacing system of international level (outdoor) suly approved by ITF of calssification -III, manufactured by company of international reputation with minimum five years warranty with the following nine layers of synthtic cushioned surfacing material including including marking of court lines with 100 % acrylic resin based line marking paint. (1) filler course (one layer of acrylic resurface), (2) heavy rubber course (three layers of flexible latex base liquid rubber with course particals), (3) fine rubber course (Two layers of flexible latex base liquid rubber with finer particles) (4) Texture course (one layer of flexible filler acrylic base) (5) Finish course (Two layers of 100 % acrylic resin base paint). All above applications are to be applied as per manufacturers specifications / consumption standards and as per the direction of engineer-in-charge. Note:- 1. prior to the start of the work the agency shall submit methodology of execution of the above items for approval of engineer-in-charge. 2. The rate of the item includes teh cost of material, all statutory taxes, import duty, insurances, labour, tools, transportation of material from manufacturer to the site, storing and laying of the same. Nothing extra shall be paid over this rate.

Providing and fixing poles (for tennis court nets and badminton court net) consists of 3'' tubular round MS heavy durty pipes, polyester coated with brass winder and internal wind system, pinned at the bottom including fixing with ground sleeves complete as per the direction of engineer-in-charge.

Providing and fixing lawn tennis and badminton nylon net of make Garware sportiva tournament as approved and as per direction of engineer-in-charge.

Providing and fixing poles (for basket ball court) consists of 6'' tubular round MS heavy durty pipes with basket, including fixing on ground with concrete 1:1.5:3 grade all complete as per the direction of engineer-in-charge.