Delhi Development Authority Tender

Air Swing: Providing, designing and fixing of air swing in pair of size 1150x900x1250 mm fabricated with main post of 114 mm dia and 2.5 mm thick and rest of the pipe 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. Zinc primer paint to be applied at all welding points prior to finishing. Pedals shall be made of Nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic of 8 mm, colorful and UV resistant and environment friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movements. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrets is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of Engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc.(Demolishing and disposal of existing cement concrete, excavation work and laying new cement concrete shall not be paid separately).

Horse Rider Station: Providing, designing and fixing of horse rider station of size 1000x600x1100 mm fabricated with main post of 114 mm dia and 2.5 mm thick and rest of the pipe 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact of injury. Base plate cover and seat to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolt and once the concrete is set, fix the equipment on to it and cover with the base plate. All complete as per direction and approval of engineer-in-charge regarding material shape of equipment colour on metal, seat and base cover plate cover and fixing of equipments etc. (Demolishing and disposal of existing cement concrete, excavation work and laying new cement concrete shall not be paid separately).

Stair Stepper: Providing, designing and fixing of stair stepper in a combination of pair and a single step of size 1000x800x1400 mm fabricated with main post of 114 mm dia and 2.5 mm thick and rest of the pipe 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zine primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact on injury and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8 mm colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movements. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolt and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of Engineer-in-charge regarding material, shape of equipment colour on metal seat and base cover plate and fixing of equipments etc. (Demolishing and disposal of existing cement concrete, excavation work and laying new cement concrete shall not be paid separately).

Leg Press: Providing, designing and fixing of leg press of size 2000x550x1600 mm fabricated with main post of 114mm dia and 2.5 mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing handles bars to be provided with high quality grip rubber on top end. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact of injury seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movements. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of Engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. (Demolishing and disposal of existing cement concrete, excavation work and laying new cement concrete shall not be paid separately).

Pull Chair: Providing, designing and fixing of pull chair in a pair of size 2500x800x2000 mm fabricated with main post of 114mm dia and 3.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handles bars are to be provided with high quality grip rubber on top end. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury seat and base plate cover to be made up from virgin LLDPE manufactured b rotational moulding with minimum thickness of plastic as 8mm, colourful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiters to be prevent unwanted movement. All open ends of pipe to be closed by G!/LLDPE caps for user safety. The equipment to be fixed on ground concrete of minimum strength M-25 and J shape welded bolt and once the concrete is set fix the equipment on to it and cover with the base plate. All complete as per direction and approval of Engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.(Demolishing and disposal of existing cement concrete, excavation work and laying new cement concrete shall not be paid separately).

Seated Chest Press: Providing, designing and fixing o seated chest press in a pair of size 1800x700x2000 mm fabricated with main post of 114mm dia and 2.5 mm thick and rest of the pipe 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing handles bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent by impact or injury seats and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm colourful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by G.I./LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength of M-25 and I shape welded bolt and once the concrete is set, fix the equipment on to it and cover with the base plate. All complete as per direction and approval of Engineer-in-charge regarding material shape of equipmnt colour on metal seat and base and plate and fixing of equipments etc. (Demolishing and disposal of existing cement concrete, excavation work and laying new cement concrete shall not be paid separately).

Arm Wheel: Providing, designing and fixing of arm wheel in a pair of size 850 x 800 x 1000 mm fabricated with main post of 114mm dia and 2mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated uting Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fined with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal seat and base and plate and fixing of equipments etc. (Demolishing and disposal of existing cement concrete, excavation work and laying new cement concrete shall not be paid separately).

Elliptical Exerciser: Providing, designing and fixing elliptical exerciser of size 1200 x 540 x 1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dis and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing, Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and ) shape welded bolts and once the concrete is set, fix the equipments on to it and cover with the base plate. All complete as per direction and approval of engineer-in-charge regarding material,shape of equipment, colour on metal seat and base and plate and fixing of equipments etc. (Demolishing and disposal of existing cement concrete, excavation work and laying new cement concrete shall not be paid separately).

Double Cross Walker: Providing, designing and fixing double cross walker of size 1600x600x1600 mm fabricated with main post of 114 mm dia and 2.5 mm thick and rest of the pipe 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Noble or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs Zinc primer paint to be applied at all welding points prior to finishing handles bars are to be provided with high quality grip rubber, Pedals shall be made up of Nylon alloy with rounded edges to prevent by impact or injury seats and base plate cover to be made up from virgin LDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm colourful and UV resistant and environmental friendly. Bearing usred shall be maintenance free, duly all sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fined with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by G.I./LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength of M-25 and I shape welded bolt and once the concrete is set, fix the equipment on to it and cover with the base plate. All complete as per direction and approval of Engineer-in-charge regarding material shape of equipment, colour on metal seat and base and plate and fixing of equipments etc. (Demolishing and disposal of existing cement concrete, excavation work and laying new cement concrete shall not be paid separately).

Twister: Providing designing and fixing twister of size 1700x1300x1300 mm fabricated with main post of 144 mm dia and 2.5 mm thick and test of the pipe 40 mm dia and 2.5 mm thick all pipes made up hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burts Zinc primer paint to be applied at all welding points prior to finishing handles bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent by impact or injury seats and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm colourful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt linuiters to prevent unwanted movement. All open ends of pipe to be closed by GJ/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength of M-25 and shape welded bolt and once the concrete is set, fix the equipment on to it and cover with the base plate. All complete as per direction and approval of Engineer-in-charge regarding material shape of equipmint colour on metal seat and base and plate and fixing of equipments etc. (Demolishing and disposal of existing cement concrete, excavation work and laying new cement concrete shall not be paid separately).

Rowing Machine: Providing designing and fixing rowing machine of size 1280x800x1150 mm fabricated with main post of 114 mm dia and 2.5 mm thick and rest of the pipe 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Alozo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing handles bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent by impact or injury seats and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm colourful and UV resistant and environmental friendly. Bearing used shall be maintenance tree, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by G.I./LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength of M-25 and J shape welded bolt and once the concrete is set, fix the equipment on to it and cover with the base plate. All complete as per direction and approval of Engineer-in-charge regarding material shape of equipmnt colour on metal seat and base and plate and fixing of equipments etc. (Demolishing and disposal of existing cement concrete, excavation work and laying new cement concrete shall not be paid separately).

cost escalation @3% from 2021 to 2024

Deduction for taking away the old gym equipments with/without dismembering i/c dismantling charges and removig the dismantled old gym equipments from the site as per the direction of Engineer-in-charge:-

Air walker

Sit up station

Air Swing

Horse rider station

Stair Stepper

Leg Press

Pull Chair

Seated chest press

Arm wheel

Elliptical Exerciser

Double cross walker

Twister

Rowing machine

Schedule – B

Maintenance cost for 5 years of newly installed open gym equipments

Free maintenance for first two years after installation of open gym equipments

For 3rd year item No.1 to 13 of schdeule 'A' Rs.32,07,976/- @2%

For 4th year item No.1 to 13 of schdeule 'A' Rs.32,07,976/- @3%

For 5th year item No.1 to 13 of schdeule 'A' Rs.32,07,976/- @4%

Terms and Conditions: For buy back of old gym equipments: 1 Buy back rates are applicable against exchange of same quantity of new open gym equipments only. 2 Buy back rates are inclusive of dismantling charges and removing the dismantled old gym equipments from the site. 3 List of parks is as follows: (i) Distt. Park South of Kanti Nagar (ii) NHP at Shanti Vihar (iii) Green Area at ITI Vivek Vihar (iv) Green Area at Jhilmil Ph.- II (Deer Park) (v) Green area Opp. Vivek Vihar Road No.56 (Surya Nagar) (vi) Park and RSP at CBD Centre Shahdara 4 Date of start for maintenance period for new open gym equipments will be considered only after installation of gym equipments in all the parks mentioned in the list.