Delhi Development Authority Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Delhi Development Authority - DDA Tender
Coronavirus COVID 19
Eprocure
Opening Date23 Sep 2019
Closing Date4 Oct 2019
Tender Amount₹ 4,23,21,627
Costs
EMD
₹ 8,46,433Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
C/o Community Hall Including Internal Electrification And S.i.t.c. Of Fire Alarm, Fire Fighting, Lift, D.g.set Etc. At 512 Mig Houses, Rajouri Garden, New Delhi.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_DDA_505258_1Bid Award Id
ViewTender No
05/EE/WD-13/DDA/2018-19 (Re-invited)Tender Authority
Delhi Development Authority ViewPurchaser Address
-Website
http://https://dda.org.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Extra for every additional lift of 1.5m or part thereof in excavation/ banking excavated or stacked materials.
(a) All kinds of soil.
391
-
51.75
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
631
-
125.75
... More
Supplying and filling in plinth with sand under floors including, watering, ramming consolidating and dressing complete.
54
-
917.75
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:
(a) 1:5:10 (1 cement : 5 coarse sand(zone-III) : 10 graded stone aggregate 40 mm nominal size)
183
-
4209.05
... More
(b) 1:4:8 (1 cement : 4 coarse sand (zone-III): 8 graded stone aggregate 40 mm nominal size)
29
-
4478.15
... More
(c) 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 20 mm nominal size)
3
-
5481.95
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets sunken floors etc. up to floor five level, excluding the cost of centering, shuttering and finishing:
(a) 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
3
-
6547.7
... More
Centering and shuttering including strutting, propping etc. and removal of form work for:
(a) Foundations, footings, bases for columns.
135
-
193.95
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
76
-
263.1
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
76
-
91.9
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, leveling & dressing & finishing the top smooth.
90
-
450.35
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights:
(a) Foundations, footings, bases of columns, etc. for mass concrete.
195
-
193.95
... More
(b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
186
-
378.6
... More
(c) Suspended floors, roofs, landings, balconies and access platform.
1204
-
422.3
... More
(d) Shelves (cast in situ.)
6
-
422.3
... More
(e) Lintels, beams, plinth beams, girders, bressumers and cantilevers.
1291
-
342.9
... More
(f) Columns, Pillars, Piers, Abutments, Posts and Struts.
632
-
467.85
... More
(g) Stairs, (excluding landings) except spiral-staircases.
44
-
419.35
... More
(h) Weather shade, Chajjas, corbels etc., including edges.
121
-
521.75
... More
Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
(a) Thermo-Mechanically Treated Bars of grade Fe-500D or more.
39040
-
56.6
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
(a) Thermo -Mechanically Treated Bars of grade Fe-500D or more.
62880
-
56.6
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability
as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum).
(a) All works upto plinth level
244
-
6446.45
... More
All works above plinth level upto floor V level
393
-
7250.05
... More
Extra for providing richer mixes at all floor levels.
(a) Providing M-30 grade concrete instead of M-25 grade BMC/ RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum)
637
-
69.5
... More
Add for using extra cement in the items of design mix over and above the specified cement content therein.
64
-
672.75
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
(a) Cement mortar 1:6 (1 cement : 6 coarse sand)
352
-
4751.65
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:
(a) Cement mortar 1:6 (1 cement : 6 coarse sand)
214
-
5582.85
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
(a) Cement mortar 1:4 (1 cement :4 coarse sand)
150
-
684.2
... More
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry
150
-
56.85
... More
Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately.)
(a) White sand stone- 30 mm thick gang saw cut stone.
469
-
1500.7
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
Granite of any colour and shade
(a) Area of slab over 0.50 sqm
23
-
3113.3
... More
Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately).
Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble.
(a) Area of slab over 0.50 sqm
290
-
3035.5
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
(a) Granite work
107
-
245.7
... More
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
17
-
266.25
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
1
-
427.95
... More
Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry backing with cement mortar 1:2 ( 1 cement : 2 coarse sand), including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately).
(a) Stainless steel cramps
2
-
521.1
... More
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.
Wedge expansion type
(a) Fastener with threaded dia 6 mm
760
-
25.25
... More
Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50 cm deep and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
(a) Granite Stone of approved shade.
4
-
2831.85
... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in- Charge:
(a) Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
503
-
2887.85
... More
Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.
805
-
231.5
... More
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
(a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
60
-
1559.75
... More
Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)
(a) On one side only
120
-
394.9
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:
(a) 300x16 mm
17
-
212.45
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete:
(a) 300x10 mm
17
-
99.7
... More
(b) 150x10 mm
17
-
64.3
... More
Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete.
17
-
66.55
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:
(a) 125 mm
34
-
51.1
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
(a) Twin rubber stopper
17
-
38
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.
17
-
622.15
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
(a) Using M.S. angles 40x40x6 mm for diagonal braces
3
-
2870.25
... More
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:
Profile E
(a) Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)
110
-
390.4
... More
Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.
20
-
112.15
... More
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
8
-
130.1
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
(a) In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
12048
-
65.8
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
(a) Hot finished welded type tubes
4916
-
90.25
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
178
-
472.4
... More
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3mm and nuts & bolts complete.
(a) Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides.
70
-
1041.55
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with:
(a) 4.0 mm thick glass panes.
70
-
689.05
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand):
(a) 25 mm thick.
46
-
1158.1
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
12
-
1238.2
... More
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
116
-
84.85
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
376
-
744.8
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete.
59
-
901.05
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.
(a) Size of Tile 600x600 mm
152
-
1119.4
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete.
4
-
187.6
... More
Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc.:
(a) 100 mm diameter
60
-
167.35
... More
Providing lead caulked joints to sand cast iron rain water pipes and fittings:
(a) 100 mm dia. Pipe
20
-
309.95
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
(a) 110 mm diameter
32
-
236.35
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Bend 87.5°
(a) 110 mm bend
4
-
113.1
... More
Shoe (Plain)
(b) 110 mm Shoe
4
-
98
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
(a) 110 mm
28
-
181.4
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
4
-
40.9
... More
12 mm cement plaster of mix:
(a) 1:6 (1 cement: 6 fine sand)
1248
-
160.35
... More
15 mm cement plaster on the rough side of single or half brick wall of mix:
(a) 1:6 (1 cement: 6 fine sand)
1580
-
185.2
... More
12 mm cement plaster of mix:
(a) 1:4 (1 cement: 4 coarse sand)
318
-
180.85
... More
Neat cement punning
318
-
42.6
... More
6 mm cement plaster of mix:
(a) 1:3 (1 cement: 3 fine sand)
1210
-
143.8
... More
6 mm cement plaster 1:3 (1 cement: 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.
81
-
192.85
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade.
(a) New work (two or more coats) over and including water thinnable priming coat with cement primer.
889
-
93.7
... More
Finishing walls with textured exterior paint of required shade:
(a) New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @2.20kg/10 sqm.
1226
-
150.65
... More
Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work.
(a) 100 mm diameter pipes
154
-
40.55
... More
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:
(a) Two or more coats on new work.
718
-
84.45
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:
(a) Two or more coats on new work
204
-
78.4
... More
Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required.
(a) Bituminous portion
34
-
2384.05
... More
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mmthick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
84
-
615.7
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
3
-
5012.65
... More
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in charge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately).
1065
-
6912.15
... More
Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.
150
-
1907.95
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required:
(a) White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.
4
-
3494.2
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:
(a) One urinal basin with 5 litre white P.V.C. automatic flushing cistern.
1
-
3494.15
... More
Range of two urinal basins with 5litre white P.V.C. automatic flushing cistern.
1
-
5373.4
... More
Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern.
1
-
10109.6
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
(a) White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps.
8
-
2020.6
... More
Providing and fixing Stainless Steel A,ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:
Kitchen sink with drain board
(a) 510x1040 mm bowl depth 250 mm.
1
-
4120.8
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer-in-charge.
5
-
254.8
... More
Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet:
(a) 250x130x30 mm
4
-
166.3
... More
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
(a) 10 litre capacity - White.
4
-
831.5
... More
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.
4
-
96.6
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Flexible pipe (a) 32 mm dia
9
-
73.25
... More
Providing and fixing 100 mm sand cast Iron grating for gully trap.
22
-
29.25
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
8
-
817.95
... More
Providing and fixing toilet paper holder:
(a) C.P. brass
5
-
385.35
... More
Providing and fixing soil, waste and vent pipes:
100 mm dia.
(a) Sand cast iron S&S pipe as per IS: 1729.
154
-
862.8
... More
Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes:
(a) 100 mm dia pipe
87
-
85.95
... More
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc.
(a) For 100 mm dia. Pipe.
87
-
167.35
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
100 mm dia
(a) Sand cast iron S&S as per IS - 1729
10
-
340.75
... More
Providing and fixing plain bend of required degree.
100 mm dia
(a) Sand cast iron S&S as per IS -1729
10
-
433.7
... More
Providing and fixing heel rest sanitary bend
100 mm dia
(a) Sand cast iron S&S as per IS - 1729
4
-
317.55
... More
Providing and fixing single equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
100x100x100 mm
(a) Sand cast iron S&S as per IS - 1729
10
-
484.8
... More
Providing and fixing terminal guard:
100 mm
(a) Sand cast iron S&S as per IS - 1729
10
-
247.85
... More
Providing and fixing collar:
100 mm
(a) Sand cast iron S&S as per IS - 1729
10
-
187.45
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter:
(a) 100 mm
30
-
309.95
... More
Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter:
(a) 100 mm
10
-
62
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:
100 mm inlet and 100 mm outlet
(a) Sand cast iron S&S as per IS: 3989.
10
-
1034.45
... More
Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand):
(a) 100 mm dia.
20
-
355.7
... More
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work:
(a) 100 mm diameter pipe
154
-
40.65
... More
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
5
-
9685.7
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall.
(a) 40 mm nominal outer dia. Pipes.
45
-
385.5
... More
(b) 32 mm nominal outer dia. Pipes.
45
-
289.05
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc.
(a) 32 mm nominal outer dia .Pipes.
40
-
412.9
... More
25 mm nominal outer dia .Pipes.
46
-
333.6
... More
20 mm nominal outer dia .Pipes.
55
-
284.85
... More
15 mm nominal outer dia .Pipes.
160
-
246.2
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
External work.
(a) 50 mm nominal outer dia. Pipes.
100
-
484.25
... More
(b) 40 mm nominal outer dia. Pipes.
75
-
321.15
... More
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main:
(a) 20 mm nominal bore
1
-
280.65
... More
Providing and fixing uplasticised PVC connection pipe with brass unions:
45 cm length
(a) 15 mm nominal bore
24
-
67.8
... More
Providing and filling sand of grading zone V or coarser grade all- round the G.I. pipes in external work.
(a) 40 mm diameter pipe
75
-
72.25
... More
(b) 50 mm diameter pipe
100
-
74.95
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:
(a) 15 mm nominal bore.
11
-
371.7
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
(a) 15 mm nominal bore.
18
-
545.95
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
(a) 15 mm nominal bore
8
-
475.7
... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
30
-
58.1
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
(a) 15 mm nominal bore
2
-
492.55
... More
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.
(a) 40mm nominal bore, 206mm long. Weighing not less than 690 gms.
2
-
646.7
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):
(a) 32 mm nominal bore.
2
-
500.75
... More
Cutting holes up to 30x30 cm in walls including making good the same:
(a) With common burnt clay F.P.S. (non modular) bricks.
9
-
219.2
... More
Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand 6 graded stone aggregate 20 mm nominal size) including disposal of malba.
9
-
134.55
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
(a) 100 mm diameter
83
-
216.25
... More
(b) 150 mm diameter
80
-
327.05
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:
(a) 100 mm diameter S.W. pipe
83
-
622.95
... More
(b) 150 mm diameter S.W. pipe
80
-
761.85
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
100x100 mm size P type
(a) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
11
-
1602.4
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete:
(a) 250 mm dia. R.C.C. pipe
30
-
482.05
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design:
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg):
(a) With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
5
-
8634.1
... More
Extra for depth for manholes
Size 90x80 cm
(a) With common burnt clay F.P.S. (non modular) bricks ofclass designation 7.5
5
-
5718.6
... More
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design:
0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately):
(a) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
8683.75
... More
Extra depth for circular type manhole 0.91 m internal dia (at bottom) beyond 0.91 m to 1.67 m
(a) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1.5
-
4911.8
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) complete as per design.
8
-
327.9
... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete:
(a) For pipes 250 to 300 mm diameter
3
-
463.45
... More
Constructing brick masonry road gully chamber 50x45x60 cm with bricks 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design:
(a) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
11
-
4043.1
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately):
For fixed portion
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
1088
-
355.2
... More
For shutters of doors, windows and ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
(a) Anodized aluminium ( anodized transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
818
-
415.05
... More
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.
(a) Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.
90
-
826.35
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber /neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in - charge. (Cost of aluminium snap beading shall be paid in basic item).
(a) With float glass panes of 4.0 mm thickness
16
-
741.5
... More
(b) With float glass panes of 5.50 mm thickness.
15
-
1003.95
... More
(c) With float glass panes of 8 mm thickness
31
-
1153.9
... More
Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in-charge complete.
(a) 355 x 19 mm
40
-
237.15
... More
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.
(a) Anodized (AC 15 ) aluminium tubular handle bar.
28
-
463.75
... More
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
19
-
359
... More
Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.
(a) Anodized (AC 15) aluminium.
48
-
52
... More
Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge.
(a) Anodized (AC 15 ) aluminium
48
-
62.5
... More
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
335
-
408.85
... More
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/Stone/wood/Ceramic/Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete complying to ASTM C920, DIN 18540-F & ISO 11600.
(a) Upto 5mm depth and 5 mm width
178
-
96.65
... More
(b) Upto 10 mm depth and 10 mm width
66
-
133.2
... More
Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of:
(i) Ist layer of 22mm to 25mm thick approved and specified rough stone slab over a 25mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound.
(ii) 2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions.
(iii) Finishing top with stone aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.
(a) Using rough kota stone.
123
-
1017.55
... More
Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20mm(minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1cement : 3 coarse sand) 20mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge:
(a) Using rough Kota stone
196
-
1253.3
... More
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:
(i) Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.
(ii) IInd course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand)mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7Kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.)
38
-
505.9
... More
Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete:
(a) Kickers (320mm wide, 5mm thick).
17
-
235.55
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls up to 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand)admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with waterproofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
(d) Finishing the surface with 20 mm thick joint less cement mortar of mix1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep.
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge:
(a) With average thickness of 120mm and minimum thickness at khurra as 65 mm.
452
-
1034.65
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level.
All types of soil
(a) 300 mm dia
60
-
370.7
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings& accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
(a) 100 mm nominal size dia
6
-
289.85
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
(a) 100 mm nominal size dia
54
-
448.05
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
6
-
921.9
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
4
-
1038.05
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads& lifts, all complete as per direction of Engineer -in-charge.
4
-
1038.05
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer- in-charge.
15
-
1175.6
... More
Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge.
16
-
959.35
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.
(a) 100 mm clamp
1
-
962.05
... More
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).
(a) 100 mm dia
1
-
184.3
... More
A. IEI
Wiring for light pt. / fan pt /exhaust fan pt./ call bell pt with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface / recess medium class PVC conduit with modular switch, modular plate, suitable size GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as reqd. GR.A
143
-
702
... More
Wiring for light /power plug with 2 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recess steel conduit along with 1 x 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as reqd.
275
-
239
... More
Wiring for light/ power pulg with 4x4 sq.mm. FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 2 nos. 4 sq.mm. FR PVC insulated copper conductor single core cable for loop earthing as required.
50
-
366
... More
Wiring for circuit / sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit as reqd.
(a) 2 x 1.5sq.mm + 1 x 1.5 sq.mm earth wire
380
-
181
... More
(b) 2x 10 sq.mm + 1 x 6 sq.mm earth wire
20
-
392
... More
(c) 4x 10 sq.mm + 2 x 6 sq.mm earth wire
15
-
653
... More
Providing & fixing fan box hexagonal type as per drawing attached 75mm side 75mm deep made out of 16 SWG thick GI sheet having 6 nos. knockouts of suitable size for conduit entry i/c fan hook made out of 12mm dia MS rod with bottom cover of 3mm thick phenolic laminated sheet painting etc. as reqd.
37
-
102
... More
Supplying and fixing following way horizontal type, three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bas bar, earth bar, din bar, interconnections, powder painted i/c earthing etc. as required, (But without MCB/RCCB/Isolator).
(a) 8 way (4+24), double door
2
-
3171
... More
(b) 4 way (4+12), double door
1
-
2198
... More
Providing and fixing following rating, Four pole, 415 V, isolater in the existing MCB Dbcomplete with connections, testing and commissioning etc. as required.
(a) 100A
3
-
859
... More
(b) 63A
1
-
678
... More
S/F 5 amps to 32 amp rating 240 / 415 volts,10 kA C-series miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections testing and commissioning etc. as reqd.
(a) Single Pole
40
-
173
... More
(b) Single Pole and neutral
2
-
445
... More
S/F brass batten / angle holder i/c connection etc as reqd.
17
-
75
... More
Supplying and fixing size GI box with modular plate and cover in front on surface or in recess ,including providing and fixing 3pin 5/6 A modular socket and 5/6 A modular switch ,connection switch etc.as required
14
-
313
... More
Supplying and fixing size GI box with modular plate and cover in front on surface or in recess ,including providing and fixing 6pin 5/6 A and 15/16 A modular socket outlet and 15/16A modular switch ,connection switch etc. as required.
14
-
406
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
25
-
7
... More
Supplying and installation and commissioning of ceiling fan 1200mm sweep operated on single phase 220V 50HZ A.C. supply i/c speed regulator down rod connection testing etc. complete as reqd.(Double ball bearing).
35
-
1639
... More
Supplying, installation, testing & commissioning of heavy duty 300 mm dia exhaust fan of 900 rpm with louvers/ shutter suitable for operation on 230/240 volts. 50 Hz. AC supply i/c connections etc. complete as required.
13
-
1806
... More
Supplying, installation, testing & commissioning of LT cubical panel meter board of size 900 mm x 1000mm x 300mm duly compartmentalized, made out of 1.6mm thick MS CRCA sheet (nominal size) floor cum wall mounted suitable for operation on 415 V, 50 Hz, AC supply i/c supplying, fixing making connection & inter connection of the accessories mounted thereon with suitable size of copper wire or tapped with thimble/lugs and earthing the body of the meter board with GI earth strip complete with following accessories mounted thereon and duly painted after applying two coats of Primer by approved colour and providing following accessories.
(i) 100 amps, 16 KA MCCB TPN 4 Nos.
(ii) 250 amps, 25 KA MCCB TPN 1 Nos.
(iii) 4 strip 200 Amp. Al. Busbar - PVC sleeve 1 Set
(iv) Danger notice plate - 1 No.
(v) Phase indicating lamp with (RYB) L.E.D. type with toggle switch & HRC fuses - 1 Set
(vi) Earth stud - 2 Nos.
(vii) Volt Meter 0-500V with SS
(viii) Ampere meter 0-250A with SS and CT,s etc.
(ix) Cable gland knock out - 1 Set.
1
-
50412
... More
Earthing with GI earth pipe 4.5 mtr long 40 mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal or coke and selt as reqd.
4
-
3672
... More
Providing and fixing 25mm x 5mm GI strip in 40mm dia GI pipe from earth electrode i/c connection with GI nut bolts spring washer excavation and refilling etc. as reqd.
30
-
351
... More
Providing and fixing 25mm x 5mm GI strip on surface or in recess for connection etc. as reqd.
30
-
129
... More
Providing and fixing 6SWG Dia GI wire on surface or in recess for connection etc. as required.
60
-
37
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
25
-
488
... More
Supplying of following sizes of XLPE insulated of 1.1 KV Grade Al. cond. armoured power cable including connection, testing etc. as required.
(a) 2C x16 sq. mm.
150
-
147
... More
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge i/c painting etc as required.
Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored).
60
-
22
... More
Supplying, Installation, Testing and Commissioning of LED regular street light fitting (IP 66 protection) of 120 W complete in all respect i/c making connections , earthing the same and to meet the requirement as per technical specifications etc. as required.
10
-
18914
... More
Numbering of ceiling fan/ exhaust fan/ fluorescent fittings/ MCB DB's etc. as required.
150
-
28
... More
Supplying, Installation, Testing and Commissioning of 4ft LED Button 18 watt i/c making connections etc complete as required.
95
-
493
... More
B. Fire Alarm & PA System.
Supplying, installation, testing and commissioning of 4 Zone microprocessor based automatic conventional master fire alarm control panel floor /wall mounted type fabricated out of 1.6mm thick CRCA Sheet, dust and vermin proof, powder coated, complete in all respect suitable for operation 220 V AC 50 Hz, power supply and battery charger, highly descriptive 20 correctors 4 line LCD Display, Minimum 100 events, Zone wise customize locations, programmable relay mode, pre-alarm, one men test (walk test facility), shall have the facility to interface with PA system, with Power Supply & Battery Charger with 2 nos 12 Volt 12 AH Maintenance free batteries. The Panel consists of:-
• P.A. Monitor Panel
• 04 Way PA Selector & All call Facility
• 250 Watt amplifier with microphone
1
-
44724
... More
Providing, installation, testing and commissioning manual call box (fabricated from 16 SWG MS CRCA sheet) having dust tight Emergency push button to indicate audio and visual alarm with a breakable glass cover with steel hammer attached with steel chain strictly complete as per standard design & duly painted with powder coated paint of approved shade complete as reqd.
4
-
485
... More
Supplying, fixing, testing and commissioning of Medium intensity sounder-cum-hooter (16SWG MS body) with 4” speaker i/c connections etc. as required at site.
4
-
743
... More
Supplying, installation, testing and commissioning of Response Indicator (16 SWG MS body) i/c connections as required at site.
2
-
263
... More
Supply, installation testing and commissioning of heat Detectors as required complete. (Rate of rise cum fixed type).
2
-
1500
... More
Supply, installation testing and commissioning of Smoke Detectors (Optical) with blinking LED etc. in suitable size of M.S. pipe box as required complete.
25
-
1600
... More
Supplying, laying, testing and commissioning of following sizes of 1.1 KV copper conductor armoured cable on wall/ceiling surface with accessories complete connection etc. as required a) 2X1.5 sq. mm.
350
-
148
... More
C. Fire Fighting system
Supplying, installation, testing and commissioning of electric driven terrace pump of centrifugal type end suction suitable for automatic operation and Suitable HP squirrel cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC with IP 55 class of protection for enclosure Suitable for following duties:-
a) Discharge 900 LPM
b) Head 35 mtr.
c) MS fabricated common base plate, coupling, coupling guard, foundation bolts etc. as reqd.
d) Suitable cement concrete foundation duly plastered with anti vibration pads.
2
-
53600
... More
Supplying, installation, testing & commissioning Horizontal centrifugal pump set of make Kirloskar/Crompton with C.I casing, Bronze impeller, SS shaft with Suitable HP, 3 Phase 2900 RPM electric motor suitable for operation on 400/440 volts, 3 phase 50 Hz AC, 100mm dia pressure gauge, G.M. isolation cock complete as required. Cost shall include electrical control panel, starters, CTs, Ammeter, Voltmeter, suitable rating TP & N SDFU, phase indicating lamps, Al. bus bars of suitable ratings with wiring & all accessories etc.
a) Domestic Water Pumps with motor.
b) Capacity 6 LPS each.
c) Head 30 Mtr.
d) RPM 2900
2
-
47335
... More
Fabrication, supplying, installation, testing and commissioning of electric control panel of cubical construction, floor mounted type fabricated out of 2mm thick CRCA sheet, compartmentalized with hinged lockable doors, dust & vermin proof , powder coated of approved shade after 7 tank treatment process, cable alley, inter connections, having switch gears and accessories mounting and internal wiring, earth terminals numbering etc. complete in all respect, suitable for operation on 415V, 3 phase, 50 Hz AC supply with enclosure protection class IP-55, etc. as per specifications attached. (a) 160 Amp. TP & N SDFU with HRC fuses. 1 Nos.
(b) Voltmeter (0-500V) with selector switch. 1 Nos.
(c) Ameter (0-200 Amps) with selector switch and CTs etc. 1 Nos.
(d) Ameter (0-60 Amps) 2 Nos.
(d) Set of 3 Phase indicating lamp with SPMCB’s 1 Set
(e) Set of Al. Bus bar of suitable ratings. 1 Set
(f) 63 Amp. TP & N switch disconnector fuse unit with HRC fuses - 4 Nos. with suitable HP fully.
(g) Single phase preventer 1 Nos.
(h) DOL starter suitable for above mention pump
1
-
34500
... More
Providing, laying, testing and commissioning of ‘C’ class heavy duty MS pipe conforming to IS: 1239/3589 i/c fitting like elbows, tees, flanges, tapers, nuts, bolts, gasket etc. on surface with cement concrete block and on wall/ceiling with suitable clamps & painting with two coats of synthetic enamel paint of required shade complete as reqd. (a) 100 mm dia
50
-
1550
... More
(b) 80 mm dia
50
-
950
... More
(c) 65 mm dia
30
-
900
... More
(d) 25 mm dia
35
-
533
... More
Supplying, fixing, testing and commissioning of C.I. butterfly valve PN 1.0 duly ISI marked complete with nuts, bolts, washers, gaskets confirming to IS : 13095 of following size as reqd.
(a) 100 mm dia
1
-
5880
... More
(b) 80mm da.
2
-
5000
... More
(c) 65 mm dia.
2
-
4800
... More
Providing, installation, testing and commissioning of C.I. double flanged non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket G.I. bolts, nuts, washers etc. as reqd.
(a) 80mm dia.
2
-
7000
... More
(b) 65 mm dia.
2
-
6000
... More
Supplying and fixing stainless steel single headed internal landing valve with 2 instantaneous S.S coupling of 63mm dia with individual cast iron wheel ISI marked conforming to IS : 5290 (Type A) with blank ABS cap and chain as reqd. i/c 6mm thick SS orifice plate of adequate size as reqd.
2
-
6200
... More
Supplying and fixing 63mm dia 15 mtr. long RRL hose pipe with 63mm dia male & female stainless steel coupling duly binded with G.I. wire rivets etc. conforming to IS : 636 (Type A) as reqd.
4
-
4500
... More
Providing , installation, testing and commissioning of 25 mm dia. Bronze ball valve complete etc. as required.
2
-
1810
... More
Supply and fixing first aid Hose Reel with M.S. construction spray painted in post office Red conforming to IS : 884 with upto date amendments complete with the following as reqd.
(a) 30 mtr. long (20mm nominal) internal dia water hose thermo plastic(textile reinforced) type-2 as per IS: 12585.
(b) 20mm (nominal) internal dia. Globe valve and shut off nozzle.
(c) Drum and brackets for fixing the equipments on wall.
(d) Connection from riser with 25mm dia. Ball valve and M.S pipe.
2
-
7500
... More
Providing & fixing angle iron (40mm X 40mm X 5mm) door frame and M.S. Sheet (2mm. thick) cum glass shutter of size 2.1 mtr. X 1.5mtr. (N.S.) with 25mm X 25mm. X3mm. angle iron frame all around & stiffened in between i/c hinges, handle, locking arrangement, painting with approved synthetic enamel paint i/c sign writing on glass at internal hydrant including providing & fixing M.S. Sheet 2 mm. thick on remaining portion above door to close opening i/c painting etc. as required.
2
-
6200
... More
Supplying and fixing 4 way fire bridge connection of cast iron Body with four numbers S.S male instantaneous inlet coupling complete with cap and chain as reqd. for 100mm dia MS pipe connection, conforming to IS : 904 as reqd.
1
-
10000
... More
Providing and fixing of stainless steel Fire Brigade suction assembly with outlet, suitable for local fire tender complete as required.
1
-
5420
... More
Supplying of XLPE insulated, PVC sheathed aluminum conductor 1.1KV grade armoured power cable of following sizes as reqd.
(a) 4x25sq.mm
85
-
298
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following sizes of PVC insulated and PVC sheathed/XLPE al. conductor cable of 1.1 KV grade as reqd.
(a) 4X25 sq. mm
0.001
-
258
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)
60
-
25
... More
Supply and fixing of water pressure gauge 100mm dia of suitable scale mounted on angle iron frame of 30mmx30mmx5mm on wall complete with stop cock, 6mm dia copper pipe from pump to pressure gauge and nipple i/c connection etc. as reqd.
1
-
1800
... More
Providing and fixing of self illuminated / auto glow "EXIT" signs printed on photo luminescent sheet containing self illuminated base chemical, of appropriate size not less than 400 x 150 mm, suspended from ceiling or fixed to the walls with accessories as required and as directed at site.
4
-
450
... More
Providing, and fixing pressure switch alongwith 15/25 mm dia. Bronze ball valve in MS pipe line including connection etc. as required.
2
-
2351
... More
Supplying and laying chequered/corrugated red/black rubber mat sheet (ISI marked) suitable of 1.1 KV grade of size 2mtr.x1mtr.x5mm thick as reqd.
2
-
2500
... More
Laying of one no. PVC insulated &PVC sheathed /XLPE power cable of 1.1 kv grade of following size direct in ground i/c excavation and refilling the trench etc. as required but excluding sand cushioning and protective covering Up to 35 sq. mm
25
-
206
... More
Supplying and fixing of CO2 (carbon dioxide) gas type fire extinguisher capacity 4.5 Kg with gun metal valve, with delivery hose horn, squeeze grip/wheel type release wall, locking arrangement, operation manual and bracket with manufacturing test certificate and certificate from the explosive department of Nagpur, extinguisher confirming to IS: 15683: 2006 with ISI mark
5
-
7500
... More
Supply and installing of standard fire hose cabinet door frame (750 x600mm x 250mm ) suitable to fit in the duct made of not less than 18 SWG MS sheet having full fronted glass hinged door (4 mm thick clear glass)
2
-
4000
... More
Supplying and Fixing of 5 Kg capacity ABC (Multi purpose) Dry powder type stored pressure type fire extinguisher complete with pressure indicator guage squeeze grip level type valve and wall fixing bracket extinguisher confirming to IS: 14609: with ISI mark.
5
-
4000
... More
D. LIFT
Supply installation testing commissioning & putting in to operation 13 passengers lift (884 KG with all accessories i/c ARD system & control equipment for a total travel of 7 mtr approx. (one way) with 2 landing / opening at a rated speed of 1 mtr/sec as per the detailed specifications enclosed. i/c Comprehensive maintenance of lift which included routine, preventive & break down maintenance for a period of one year including repair / replacement of worn out items, warranty & guarantee of repaired / replacement items after completion of one year guarantee period as per additional terms & conditions enclosed.
1
-
2156250
... More
E. D.G. Set
Supplying installation, testing and commissioning of diesel engine driven generating set of 82.5 KVA capacity complete with acoustic enclosure developing 415 volts , 3 phase 4 wire 50 Hz at 0.8 power factor (lagging) A.C supply comprising of alternator directly coupled with water cooled, electric start diesel engine of suitable BHP at 1500 R.PM mounted on common m.s channel iron base frame complete with inbuilt fuel tank, charged battery, battery leads, control panel, residential silencer and anti-vibration mounting pads, connection, inter connection etc. as reqd. i/c making suitable c.c. foundation as per specification attached.
1
-
609984
... More
Supplying, installation, testing & commissioning of 100A front operated 415 Volt, 50 H2 , AC supply confirm to IS: 13947-3 change over switch in sheet steel enclosure i/c connection to earthing system etc. complete as required.
1
-
13513
... More
Supply of 4 x 70 sq. mm XLPE /PVC insulated & PVC sheathed armoured power cable of 1.1 KV grade etc. as required.
150
-
466
... More
Laying one no. PVC insulated & sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.
(a) Above 35 sq. mm & up to 95 sq. mm(clamped with 25x3 mm MS flat clamp).
150
-
72
... More
Earthing with GI earth plate 600mm x 600mm x 6mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement & watering pipe of 2.7 mtr. long with charcoal / coke and salt as required.
2
-
4327
... More
Providing and fixing 25mm x 5mm GI strip in 40mm dia GI pipe from earth electrode i/c connection with GI nut, bolt spring washer & excavation and refilling etc. as required.
20
-
351
... More
Providing and fixing 25mm x 5mm G.I. strip on surface or in recess for connection etc. as required.
15
-
129
... More
Add Cost Index @12.74% on Civil Work Rs.33624670 = 4283783
1
-
4283783
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements