Delhi Development Authority Tender

Providing and fixing "Horse Rider Station" with below specifications: 1. Dimensions (LxWxH): 1000 x 600 x 1100 mm 2. Fabricated with main post of NB 100mm (G.I.) 'C' Class Pipe of approved make. 3. Main frame of NB 65mm (G.I.) 'C' Class Pipe. 4. Handle support frame of NB 50mm (G.I.) 'C' Class Pipe and other pipes of 4 NB 32mm & NB 25mm (G.I.) 'C' Class Pipe. ('NB' stands for Nominal Bore i.e., Internal Diameter of pipe in millimetre’s) 5. All Pipes are powder coated with 80–120-micron thick AkzoNobel or equivalent Paints. 6. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 7. Zinc primer paint is applied at all the welding points prior to finishing. 8. Base plate cover made of virgin LLDPE plastic by rotational moulding with 4.00mm thickness, UV resistant and coloured. 9. Foothold made of NB 32mm (G.I.) 'C' Class Pipe. 10. Seat to be made up from virgin LLDPE manufactured by rotational moulding with 4.00 mm thickness, coloured, UV resistant and environmentally friendly. 11. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 12. The equipment are fitted with inbuilt limiters to prevent unwanted movements. 13. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. 14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. 15. High tensile steel with galvanized nut bolts are used for assembly. 16. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 17. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.

Providing and fixing "Leg Press" in a pair with below specifications: 1. Dimensions (LxWxH): 2000 x 600 x 1800 mm 2.Fabricated with main post of NB 100mm (G.I.) 'C' Class Pipe of approved make. 3. Seat Main frame of NB 50mm (G.I.) 'C' Class Pipe and Pipe connecting main post to seat main frame of NB 65mm (G.I.) 'C' Class Pipe. ('NB' stands for Nominal Bore i.e., Internal Diameter of pipe in millimetre’s) 4. All Pipes are powder coated with 80–120-micron thick AkzoNobel or equivalent Paints. 5. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 6. Zinc primer paint is applied at all the welding points prior to finishing. 7. Base plate cover made of virgin LLDPE plastic by rotational moulding with 4.00mm thickness, UV resistant and coloured. 8. Foothold made of NB 50mm (G.I.) 'C' Class Pipe. 9. Seats made up from virgin LLDPE manufactured by rotational moulding with 4.00 mm thickness, coloured, UV resistant and environmentally friendly. 10. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 11. The equipment are fitted with inbuilt limiters to prevent unwanted movements. 12. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. 13. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. 14. High tensile steel with galvanized nut bolts are used for assembly. 15. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 16. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.

Providing and fixing "Pull Chair' in a pair with below specifications: 1. Dimensions (LxWxH): 2400 x 800 x 2000 mm 2. Fabricated with main post of NB 100mm (G.L.) C Class Pipe of approved make. 3. Seat main frame of NB 50mm (G.L.) C Class Pipe, Pipe connecting main post with handle frame of NB 65mm (GL) 'C' Class Pipe 4. Handle frame of NB 32mm (G.L.) C Class Pipe. ("NB" stands for Nominal Bore le., Internal Diameter of pipe in millimetre’s) 5. All Pipes are powder coated with 80–120-micron thick AkzoNobel or equivalent Paints. 6. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 7. Zinc primer paint is applied at all the welding points prior to finishing. 8. Handle bars are provided with high end quality rubber grips. 9. Base plate cover made of virgin LLDPE plastic by rotational moulding with 4.00mm thickness, UV resistant and coloured. 10. Seat to be made up from virgin LLDPE manufactured by rotational moulding with 4.00 mm thickness, coloured, UV resistant and environmentally friendly. 11. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 12. The equipment are fitted with inbuilt limiters to prevent unwanted movements. 13. The equipment is fixed on ground with concrete of minimum strength M-25 and I shaped welded bolts of 18mm thickness. 14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. 15. High tensile steel with galvanized nut bolts are used for assembly. 16. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 17. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.

Providing and fixing "Seated Chest Press" in a pair with below specifications: 1. Dimensions (LxWxH): 1800 x 700 x 2000 mm 2. Fabricated with main post of NB 100mm (G.I.) 'C' Class Pipe of approved make. 3. Seat Main frame of NB 50mm (G.I.) 'C' Class Pipe. 4. Handle frame of NB 32mm and NB 25mm (G.I.) 'C' Class Pipe. ('NB' stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimetre’s). 5. All Pipes are powder coated with 80–120-micron thick AkzoNobel or equivalent Paints. 6. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 7. Zinc primer paint is applied at all the welding points prior to finishing. 8. Handle bars are provided with high end quality rubber grips. 9.Base plate cover made of virgin LLDPE plastic by rotational moulding with 4.00mm thickness, UV resistant and coloured. 10. Seat to be made up from virgin LLDPE manufactured by rotational moulding with 4.00 mm thickness, coloured, UV resistant and environmentally friendly. 11. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 12. The equipment are fitted with inbuilt limiters to prevent unwanted movements. 13. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. 14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. 15. High tensile steel with galvanized nut bolts are used for assembly. 16. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 17. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.

Providing and fixing "Arm Wheel" in a pair with below specifications: 1. Dimensions (LxWxH): 850 x 800 x 1800 mm 2. Fabricated with main post of NB 100mm (G.I.) 'C' Class Pipe of approved make. 3. Wheel frame of NB 32mm with connecting spokes of NB 25mm, Pipe connecting main pilar with wheel frame of NB 50mm. All pipes must be (G.I.) 'C' Class Pipes. ('NB' stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimetre’s). 4. All Pipes are powder coated with 80–120-micron thick AkzoNobel or equivalent Paints. 5. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 6. Zinc primer paint is applied at all the welding points prior to finishing. 7. Base plate cover made of virgin LLDPE plastic by rotational moulding with 4.00mm thickness, UV resistant and coloured. 8. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 9. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. 10. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. 11.High tensile steel with galvanized nut bolts are used for assembly. 12. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 13. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.

Providing and fixing "Elliptical exerciser" with below specifications: 1. Dimensions (LxWxH): 1200 x 550 x 1600 mm 2. Fabricated with main post of NB 100mm (G.I.) 'C' Class Pipe of approved make. 3. Main frame of NB 80mm (G.I.) 'C' Class Pipe. 4. Handle frame of N8 32mm and NB 25mm (G.I.) 'C' Class Pipe. ('NB' stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimetre’s). 5. All Pipes are powder coated with 80–120-micron thick AkzoNobel or equivalent Paints. 6. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 7. Zinc primer paint is applied at all the welding points prior to finishing. 8. Handle bars are provided with high end quality rubber grips. 9. Base plate cover made of virgin LLDPE plastic by rotational moulding with 4.00mm thickness, UV resistant and coloured. 10. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 11. The equipment is fixed on ground with concrete of minimum strength M-25 and I shaped welded bolts of 18mm thickness. 12. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. 13. High tensile steel with galvanized nut bolts are used for assembly. 14. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 15. Self-Explanatory stainless-steel label fixed on equipment for ease of use. 16. Foothold made of Co-Polymer Plastic with rounded edges to prevent impact and injury, including maintenance cost for 2 years.

Providing and fixing "Double Cross Walker "with below specifications: 1. Dimensions (LxWxH): 1600 x 600 x 1600 mm 2. Fabricated with main post of NB 100mm (G.I.) 'C' Class Pipe of approved make. 3. Handle main frame of NB 50mm and other connecting pipes of NB 32mm and NB 25mm (G.I.) 'C' Class Pipe. ('NB' stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimetre’s). 4. Foot support frame of 96 x 46 x 3mm MS rectangular pipe. 5. All Pipes are powder coated with 80–120-micron thick AkzoNobel or equivalent Paints. 6. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 7. Zinc primer paint is applied at all the welding points prior to finishing. 8. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. 9. Foothold made of Co-Polymer Plastic with rounded edges to prevent impact and injury. 10. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 11. The equipment are fitted with inbuilt limiters to prevent unwanted movements. 12. The equipment is fixed on ground with concrete of minimum strength M-25 and shaped welded bolts of 18mm thickness. 13. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. 14. High tensile steel with galvanized nut bolts are used for assembly. 15. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 16. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.

Providing and fixing "Triple Twister" with below specifications: 1. Dimensions (LxWxH): 1300 x 1300 x 1650 mm. 2. Fabricated with main post of NB 100mm (G.I.) 'C' Class Pipe of approved make. 3. Handle Main frame of NB 32mm (G.I.) 'C' Class Pipe. 4. Handle frame spokes of NB 25mm (G.I.) 'C' Class Pipe. ('NB' stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimetre’s). 5. Foothold plate of made of MS Sheet Metal of 3mm thickness. 6. All Pipes are powder coated with 80–120-micron thick AkzoNobel or equivalent Paints. 7. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 8. Zinc primer paint is applied at all the welding points prior to finishing. 9. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 10. The equipment is fixed on ground with concrete of minimum strength M-25 and shaped welded bolts of 18mm thickness. 11. Once the concrete is set, the equipment is fixed on to it. 12. High tensile steel with galvanized nut bolts are used for assembly. 13. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 14. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.

Providing and fixing "Rowing Machine" with below specifications: 1. Dimensions (LxWxH): 1250 x 800 x 1150 mm 2. Fabricated with main post of NB 100mm (G.I.) 'C' Class Pipe of approved make. 3. Main frame of NB 65mm (G.I.) 'C' Class Pipe. 4. Handle support frame of NB 25mm (G.I.) 'C' Class Pipe. ('NB' stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimetre’s). 5. All Pipes are powder coated with 80–120-micron thick AkzoNobel or equivalent Paints. 6. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 7. Zinc primer paint is applied at all the welding points prior to finishing. 8. Base plate cover made of virgin LLDPE plastic by rotational moulding with 4.00mm thickness, UV resistant and coloured. 9. Foothold made of NB 50mm (G.I.) 'C' Class Pipe. 10. Seat to be made up from virgin LLDPE manufactured by rotational moulding with 4.00 mm thickness, coloured, UV resistant and environmentally friendly. 11. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 12. The equipment are fitted with inbuilt limiters to prevent unwanted movements. 13. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. 14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. 15. High tensile steel with galvanized nut bolts are used for assembly. 16. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 17. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.

Providing and fixing "Stair Stepper" with below specifications: 1. Dimensions (LxWxH): 1100 x 800 x 1400 mm 2. Fabricated with main post of NB 100mm (G.I.) 'C' Class Pipe of approved make ('NB' stands for Nominal Bore i.e., Internal Diameter of pipe in millimetre’s) 3. Twister main frame of NB 32mm (G.I.) 'C' Class Pipe and Handle frame of NB 32mm (G.I.) 'C' Class Pipe. Twister Foothold plate of made of MS Sheet Metal of 3mm thickness. 4. Stepper main frame of MS pipe 96 x 46mm and Handle frame of NB 32mm & 25mm (G.I.) 'C' Class Pipe. 5. All Pipes are powder coated with 80–120-micron thick AkzoNobel or equivalent Paints. 6. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 7. Zinc primer paint is applied at all the welding points prior to finishing. 8. Foothold made of Co-Polymer Plastic with rounded edges to prevent impact and injury. 9. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 10. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. 11. Once the concrete is set, the equipment is fixed on to it. 12. High tensile steel with galvanized nut bolts are used for assembly. 13. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 14. Self-Explanatory stainless-steel label fixed on equipment for ease of use. 15. The equipment are fitted with inbuilt limiters to prevent unwanted movements. 16. Base plate cover made of virgin LLDPE plastic by rotational moulding with 4.00mm thickness, UV resistant and coloured including maintenance cost for 2 years.

Providing and fixing "Exercising Bar” with below specifications: 1. Dimensions (LxWxH): 1600 x 1150 x 650mm. 2. Fabricated with main frame of NB 100mm (G.I.) 'C' Class Pipe of approved make. 3. Main frame of NB 25mm (G.I.) 'C' Class Pipe. 4. Leg support of NB 65mm (G.I.) 'C' Class Pipe ('NB' stands for Nominal Bore i.e., Internal Diameter of pipe in millimetre’s) 5. Fixed on its top is back support made of perforated MS sheet of 2mm thickness. 6. All pipes are powder coated using Akzo Nobel or equivalent Paint of 80-120 micron thick. 7. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 8. Zinc primer paint is applied at all welding points prior to finishing. 9. Base plate cover made of virgin LLDPE plastic by rotational moulding with 4.00mm thickness, UV resistant and coloured. 10. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. 11. Once the concrete is set, the equipment is fixed on to it. 12. High tensile steel with galvanized nut bolts are used for assembly. 13. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 14. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. (a) All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. (a) All kinds of soil

Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. (a) All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a) 1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a) 1:5:10 (1 cement : 5 coarse sand (zone-lll) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. (a) 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. hollow tube frame or as decided by Engineer-in-Charge (Payment of M.S. frame shall be paid separetely). Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates efc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer -in - charge. (a) Nominal concrete 1:3:6 or richer mix (including equivalent design mix).

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Deduct for taking away the Old gym equipment without dismembering i/c dismantling charges and removing the dismantled old gym equipment's from the site as per the direction of Engineer-in-charge. Air Swing

Air Walker

Horse Rider Station

Arm Wheel

Double Cross Walker

Elliptical exerciser

Exercising Bar

Leg Press

Pull Chair

Rowing Machine

Seated Chest Press

Sit Up Station

Stair Stepper

Triple Twister

SCHEDULE-'B' Maintenance cost Upto 5 years For 3rd year all item of Schedule 'A' except item No. 15 .00 to 26.14 on Rs. 2162192/- @ 2.00 %

For 4th year all item of Schedule 'A' except item No. 15 .00 to 26.14 on Rs. 2162192/- @ 3.00%

For 5th year all item of Schedule 'A' except item No. 15 .00 to 26.14 on Rs. 2162192/- @ 4.00%