Delhi Development Authority Tender

Providing and fixing Stainless steel bottom patch lock of required size with computer keys(3 No.)of make Doorset, Ozone, Godrej , suitable for 8 mm to 12 mm thick glass door in all shape and color complete as per direction of Engineer in charge

Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : a)12.5 mm thick tapered edge gypsum moisture resistant board

Providing & fixing (Zebra) blinds Essence range with pelmet of white powder coated. Aluminum alloy Extruded rail. Size 75.6X12mm; weight=480 gms /running mtr. Roller tube of anodized aluminum alloy extruded grooved tube. Size:40mm outside diameter(+2%); weight=220gms/running mtr. Control unit made of high strength reinforced plastic with beaded endless chain of 4.5mm plastic beads molded on 2.0mm thick polyster cord with pitch of the beads is 6mm. bottom rail made up of white powder coated high strength aluminum alloy extruded tube, size:51+1mm Width; Weight= 215gms /running mtr(+5%) Valance Rail of white powder coated aluminum extruded alloy, which is size:84.5+1mm,Width; Weight= 320gms/running mtr. (+1mm).Fabric:100% polyster, Fabric width:125-180 GSM, Fabric thickness :0.39-0.43mm,Fabric color fastness tolight.Approved make Mac, D-Decor, Hunter Douglas, Marvel, VISTA, DECK & Areolux or eqivalent brand. (Measurements of fabric will be taken only for the purpose of payments).

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : a) Rectangular shape 453x357 mm

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). a)12 mm thick commercial ply conforming to IS : 1328 BWR type

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, , and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). a) a)12.5 mm thick tapered edge gypsum plain board

Providing and fixing 12 mm thick Fluited HDHMR board with necessary screws/nuts & bolts/ nails, , and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge

Melamine polishing on wood work (one or more coat).

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: a)Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm)

French spirit polishing : a)Two or more coats on new works including a coat of wood filler

Providing and fixing washable wallpaper of make Marshalls, D'Decor, Jaypore, Nilaya by Asian Paints, Excel Wallpapers, Home Decor and Wallskin or equivalent in different shape and colors of the approved brand all complete as per direction and satisfaction of Engineer in charge.

Application of ZMB 60/equivalent solution (100 Kg ZMB 60/equivalent, 1 litre ZMB Nano Thinner, 20 litre water & 1 Litre Zycoprime/equivalent = 122 litre/kg) over already applied coat of Zycosil/equivalent & Zycoprime/ equivalent solution on the top of all the RCC plinth beams by brush/spray coat before erection of GFRG over RCC plinth beams in GF. In the case of upper floors 150 mm wide on floor slab for all the external walls, bath/toilet/wet areas (3 hrs drying time) before erection of wall panel on upper floors including erection of parapet wall.

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for all leads and lifts, complete as per directions of Engineer-in-charge. (The item is applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more.) The rate includes the dumping & disposal charges of C&D processing plants authorised by Govt.

Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. a)Area of slab upto 0.50 sqm