Delhi Development Authority Tender

b.) 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush. a) Red sand stone

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : a) Red sand stone - Exposed face fine dressed with rough backing. i). 40 mm thick.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge(length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :(A) Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Providing & Installing the Mini Play House of make ARIHANT /KOMPAN/ LANDSCAPE STRUCTURES /OK PLAY/LEO/ KAALIA. of size 6.0x1.80mtr with Slide. Main Frame made of Round 80 NB Pipe Having min "B" class G.J. pipe. All the pipes should be ISI Marked (as per the IS 1239/2004) & of reputed brand. Ensuring the strength. Durability, stability & long life to the kids structure with safety as paramount Deck having 1035mm x750mm with collar of 65mm size made of perforated sheet. Hydraulic Precision punched holes made of min 10mm NB with sheet thickness of approx. 2.5mm. Components:- FRP (Fiber Reinforced Plastic) Main Sunshine Line designer Roof having min 2- 4 layers (approx.4mm thickness) with bright colours being UV resistant ladder main frame made of round pipe 25mm NB pipe & Ladder rungs made of 15mm N.B. pipe having width of 400min a 70mm(approx.). All the pipes should be ISI marked (as per the IS1239/2004) & of reputed brand. Tree climber made of main frame pipe of 25mm NB round pipe & rungs made of 20min NB round pipe. All the pipes should ben ISI marked(as per the IS 1239/2004) & of reputed brand Spring coil climber: made of main frame pipe of 25mm NB round pipe & springs made of 20mm NB round pipe. All the pipes should be ISI marked(as per the IS. 1239/2004) & of reputed brand. A Rotomolded plastic LLDPE made Line panel with UV stabilized color fading resistant. Having size of 1035mm x 750mm & thickness of 70mm heavy & strong for long term durability & great aesthetic look 1035mm(L)x750mm(W) having wall thickness 70m. & finish, Safety panel fitted on M.S round pipe 20mm N.B. with size of Slide having height of 1220mm approx.. & length approx.. 2mtr made of metallic GI sheet of high strength having width of 400mm mounted on M.S angle support of 4-0x40x4mm & 5nos angle supports & 20mm. N.B. round pipe hand rail, The ladder step of metallic slide should made of M.3 rectangular pipe of 70x23mm in minimum thickness of 2mm with vertical hand rift support of size 20mm N.B GI p:pe with other necessary supporting pipes. The complete structure mini play house should be powder coated with minimum powder coating thickness of 60-60 microns. Safety panel/top canopy should be also attached with help of colorful nylon clamps. Accessories: Nut bolts- All approved Gl nut bolts Galvanised Iron with High tensile Strength. Kit capacity 2-8 Nos. All Complete as per drawings attached/as per the direction of engineer-in Charge including maintenance cost for 1st Year.

Providing & Installing the Double Arch Swing of make ARIHANT /KOMPAN/ LAND SCAPE STRUCTURES / PLAY/LEO/KAALIA of size 3.10x1.50mtr. Main Frame:- Main Cross Bar made of round 75mm 0.D. pipe and legs made of 50mm N.B. pipe Legs- Arch shaped bended (Must be min in GI "B" class pipe). T pipe will be required for the Cross bar. All the pipes should be ISI marked( as per the IS 1239/2004) & of reputed brand, Ensuring the Strength, durability, stability & long life to the Kids. Structure with safety as paramount. Seats- Belt Type Seats made of Synthetic Rubberized material/Fiber reinforced fabric materials of Virgin Reinforced material & also duly with UV resistant colors, Chain Made of approx.. 6mm thick G,I chain with rubberized coating of with 3 mm minimum thickness, Chorme plated supporting hook for belts Hooks for convenience & height adjustment/ Seat Movement, self-lubricated council type bush baring clamps provided with rubber coated chain to be hang the complete belt assembly. The complete structure double arc swing should be powder coated with minimum powder coating thickness of 60-80 microns, Accessories: Nut bolts to be used All approved GI nut bolts Galvanised Iron with High tensile Strength. Kid capacity 2-4 Nos. All Complete as per drawings attached/as per the direction of Engineer-in Charge including maintenance cost for 1st Year.

Providing & Installing the SEA SAW DOUBLE of make ARIHANT /KÖMPAN/ LAND SCAPE STRUCTURES /OK PLAY/LEO/ KAALIA of size 2.0x2.50mtr.Main Frame: made of see saw made of 50mm NB pipe with planks made of 40mm NB pipe and supports made of 20mm N.B. pipe, all the G.I pipes should be "B" class & ISl marked (as per the IS 1239/2004)& of reputed brand make & Ensuring the Strength, durability, stability & long life to the kids structure with safety as paramount. Seats - Seat Made of FRP (Fibre Reinforced Plastic), duly UV resistant colors, all chemicals in the FRP material should be best quality, the Fibre Mat of 450GSM to be used for strength & stability with supporting frame. FRP Seat Sıze approx.) 10"(L) x 8" (W) with back rest. The complete structure see saw double should be powder coated with minimum powder coating thickness of 60-80 microns accessories: 1lut bolts- All approved GI nut bolts Galvanised Iron with High tensile Strength Kid capacity -4 nos. Complete as per drawings attached. All Complete as per drawings attached/as per the direction of Engineer-in Charge including maintenance cost for 1st Year.

Providing & Installing the SINGLE WAVE CLIMBER of make ARIHANT /KOMPAN/ LAND SCAPE STRUCTURES/OK PLAY/LEO/KAALIA of size 1.75x0.80mtr. Main Frame: Main Frame of single wave climber pipe made of round 32mm NB pipe (Must be min in GI "B" class pipe) and rungs made of 20mm N.B. Pipe - 'U' Shaped bended( will thickness approx. min 1.5mm - 2.2.mm only), All the pipes should be ISI marked(as per the IS 1239/2004 & of reputed brand & Ensuring the Strength, durability, stability & long life to the kids structure with safety as paramount. The complete structure single wave climber should be powder coated with minimum powder coating thickness of 60-80 microns Accessories: Nut bolts- All approved Gl nut bolts Galvanised Iron with High tensile Strength Kid Capacity - 2 to 4 Nos. All Complete as per drawings attached/as per the direction of Engineer-in Charge including maintenance cost for 1st Year.

Providing & Installing the TODDLER SWING of make ARIHANT /KOMPAN /LAND SCAPE STRUCTURES/OK PLAY/LEO/KAALLA of size 2.40x1.50mtr. Main Frame:- Main Cross Bar of toddler swing made of round 65mm NB pipe and Supporting T Bar made of 50mm N.B. Pipe (main cross bar &T supporting Bar should be in GI "B".class pipe All the Pipes should be ISI Marked( as per the IS 1239/2004) & of reputed brand make with good wall thickness. Ensuring the Strength, durability, stability & long life to the kids structure with safety as paramount. Seats- Bucket Type Seat Made of Synthetic Rubberized material or Virgin Plastic material & also duly with UV resistant colors, Chain Made of approx 6mm thick G.I chain with rubberized coating of with 3 mm minimum thickness, Chorme plated supporting hook for belts Hooks for convenience & height adjustment/ Seat Movement, self-lubricated council type bush baring clamps provided with rubber coated chain Toddler Swing to hang the complete bucket assembly.

MAINTAINANCE

CONDITIONS:- 1. The agency will maintain all the 5 Nos. of equipments for two years free of cost in park. 2. Nothing extra all the paid for new spare parts and maintenance and replacing the parts etc. 3. The machines will be maintained with proper functioning and appearance i.e. with parts, paint and cosmetic treatment. The maintenance shall the following:- a) Inspection and adjustment of movable parts, nuts / bolts, alignment, lubrication / oiling / greasing etc., wherever required. b) Check and set right / replacement of worn out bearings, misaligned moving points, adjust / tighten loose parts, covers, seats, foundations, C.C. flooring, regular oiling and greasing etc. c) Tightening of nuts / bolts/ screws inspect / repair welding of various parts/ joints of equipments. d) Cosmetic treatment like priming and painting whenever required. e) Replacement of damaged parts and rectification of any other defects observed as per direction of Engineer-in-Charge except the following:- i) The defects due to force majeure. ii) Serious loss or damage by fire / earthquake / severe flooding. iii) Any other incident which in the absolute discretion of the Engineer-in-Charge is beyond the control of the contractor. 4. The agency will place contact phone number on each equipments during the complete maintenance period otherwise a penalty of Rs. 100/-per machine per week will be deducted from each bill. 5. All the complaints must be attended/ resolved within a period of 5 Days otherwise a penalty of Rs. 1000/- per complaint per park per day shall be imposed. 6. The regular maintenance is to be done with periodically checkup i.e. every week and an inspection report /record shall be submitted to Engineer-in-Charge on monthly basis by the agency. 7. 30% amount of item no. 11 to 15 will be withheld on account of maintanance in each running and final bill of part A. 50% of withheld amount as mentioned above can be released after 1 years of completion of Part-A and the rest will be released after completion of 2nd Year after completion of part A.