Delhi Development Authority Tender
... More
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Delhi Development Authority - DDA Tender
Civil Works Others
Eprocure
Opening Date27 Feb 2025
Closing Soon13 Mar 2025
Tender Amount₹ 19,43,50,711
Technical
Technical
Financial
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender includes Class-I, Class-II, Class-III, Class-IV, and Class-V.
Bid Capacity
... View More
To determine the bid capacity required, we look at the financial requirements specified for the tender. The key requirements include: 1. Average Annual Financial Turnover: At least 30% of the estimated cost put to tender during the last three consecutive financial years.
2. Net Worth Certificate: A minimum of 10% of the estimated cost put to tender.
3. Solvency Certificate: An amount equal to 40% of the estimated cost put to tender. Given the estimated cost of Rs. 19,43,50,711/-, the calculations are:
- Average Annual Financial Turnover: 0.3 * 19,43,50,711 = Rs. 5,83,05,213.30
- Net Worth Certificate: 0.10 * 19,43,50,711 = Rs. 1,94,35,071.10
- Solvency Certificate: 0.40 * 19,43,50,711 = Rs. 7,77,40,284.40 The formulas provided are:
- Turnover Requirement: 0.3 * Estimated Cost Put to Tender
- Net Worth Requirement: 0.1 * Estimated Cost Put to Tender (or Solvency Certificate for 0.4 * Estimated Cost Put to Tender) Therefore, the bid capacity required includes an average annual financial turnover of at least Rs. 5,83,05,213.30, a net worth of at least Rs. 1,94,35,071.10, and solvency of at least Rs. 7,77,40,284.40. The specific formulas for calculating these requirements are also provided.
Technical Capacity
... View More
The required prior work experience for the bidder includes: - Project Manager: 20 years of experience (for work costing more than 100 crores), 20 years (for work costing more than 50 to 100 crores), 20 years (for work costing more than 20 to 50 crores), and 10 years (for work costing more than 10 to 20 crores).
- Deputy Project Manager: 12 years of experience (for work costing more than 100 crores, more than 50 to 100 crores, and more than 20 to 50 crores).
- Project/Site Engineer: 5 or 10 years of experience (for work costing more than 100 crores, more than 50 to 100 crores, and more than 20 to 50 crores), and 5 or 10 years (for work costing more than 10 to 20 crores).
- Quality Engineer: 8 years of experience (for work costing more than 100 crores, more than 50 to 100 crores, and more than 20 to 50 crores).
- Surveyor: 8 years of experience (for work costing more than 100 crores, more than 50 to 100 crores, and more than 20 to 50 crores, and more than 10 to 20 crores).
- Project Planning/Billing Engineer: 6 years of experience (for work costing more than 100 crores, more than 50 to 100 crores, and more than 20 to 50 crores), and 2 or 5 years (for work costing more than 10 to 20 crores). The experience requirements often include "having experience of one similar nature of work", but no specific amount and percentage values are mentioned for similar works completed.
Costs
EMD
₹ 29,43,507Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_DDA_851131_1Tender No
30/EE/DPD-5/DDA/2024-25Tender Authority
Delhi Development Authority ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Construction of Boundary wall of DDA Vacant lands/plots in Dwarka Zone.
Construction of Boundary wall of DDA Vacant lands/plots in Dwarka Zone.
BOQ Items
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
361
260
93968.3
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:5:10 (1 cement : 5 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 10 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA) )
67
4911
329093.95
... More
Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
1467
7370
10812743.55
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:2:4 (1 cement : 2 coarse sand (zone-lll) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%)
52
7654
398052.2
... More
Centering and shuttering including strutting, propping etc. and removal
of form work for : Foundations, footings, bases for columns
452
392
177251.8
... More
12 mm cement plaster of mix
1:4 (1 cement: 4 coarse sand)
5344
357
1909678.4
... More
15 mm cement plaster on rough side of single or half brick wall of mix:
1:4 (1 cement: 4 coarse sand)
5344
411
2200392
... More
Finishing walls with water proofing cement paint of required shade :
New work (Two or more coats applied @ 3.84 kg/10 sqm)
10688
116
1249427.2
... More
Providing and fixing MS board of size 1200mmX900mm consisting of 1mm thick MS sheet fixed by welding to MS angle size 50*50*6 mm frame with two Nos. vertical legs of 2.2 mtr. length (total length of board is 3.10 meter), two Nos. hold fast of 150 mm length of same angle and two nos bracing of MS Flat 40*5 mm, welded on the back side of MS Sheet including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and fixing in cement concrete 1:2:4 (1 cement : 2 coarse sand (Zone-III) i/c manufactured sand derived from RCA upto 25% : 4 graded stone aggregate 20 mm nominal size i/c RCA upto 25%) including Earthwork in excavation, disposal of excavated material, back filling, welded, priming, painting with synthetic enamel paint as required complete in all aspect as per direction of Engineer-in-Charge.
950
10733
10196825
... More
P/F MS Gate of size 3 m * 1.2 m consisting of 2 channel section 150 X 75 X 57mm at both ends embedded in CC 1:5:10 (1 cement : 5 manufactured sand derived from (RCA) : 10 graded stone aggregate 40mm nominal size Recycled Aggregate), vertical square bars 10mm dia @ 150 mm c/c, strengthen by 2 nos horizontal flat 40 X 4 mm & supported with angle 40X40X5mm all sides including kundi, hinges, handles, locking arrangements, excavation, disposal of excavated material, priming coat and synthetic enamel paint complete in all aspect as per direction of Engineer-in-charge.
85
33015
2806275
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
4600
263
1214170
... More
Lettering with black Japan paint of approved brand and manufacture.
1234400
6
7591560
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
1850
54
101102.5
... More
Total after GST modification factor @ 0.973=188690011
1
5236002
-5236002
... More
Add 3% Cost Index
1
5660700
5660700
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%