Delhi Development Authority Tender

Supplying & drawing of following size FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required. a)3 x 1.5 sq. mm

b) 3 x 2.5 sq. mm

Supplying of following sizes of XLPE insulated PVC sheathed Al. cond. Armoured power cable of 1.1 KV grade including connection, testing etc. as required. a) 2C x 16 sq. mm

b) 4C x 25 sq. mm.

b) 4C x 95 sq. mm.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation and refiling the trench but excluding sand cushioning, protective covering. a) Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation and refiling the trench but excluding sand cushioning, protective covering. a) Above 35 sq. mm and upto 95 sq. mm.

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/METAL pipe as required. a)Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/METAL pipe as required. a) Above 35 sq. mm and upto 95 sq. mm

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. i)2C x 16 sq.mm

ii)4C x 25 sq.mm

iii)3.5 C x 95 sq.mm

Supplying and replacement of following capacity electrical lamps and other accessories in the existing light fitting of 220V, 50Hz, single phase AC supply,on the existing 3 mtr. to 10 mtr. High poles, connection testing etc. complete as reqd. a) 30 Watt LED Lamp

b) 20 Watt LED Lamp

c) 9 Watt LED Lamp

Supply & replacement of pole connector box made out of Glass Reinforced Polyester Sheet Moulding Compound Conforming to IS:13410-1992 Grade S1 of outside dimensions 280 mm(H) x 170 mm(W)x 115 mm (D) (all the corners of the box should be round & not pointed ones) suitable to mount on 40/50/65 mm dia GI pole with the following provisions/accessories mounting in box complete as reqd. (i)2 nos. clamps made out of 19mm x 3 mm M.S. strip of suitable length for mounting box on the pole (if required). (ii) Water tight front cover with 2 nos. stainless steel hinges & 1 no. screw for tightening. (iii)4 way, 220 V, 30 A, dough moulded connector (SMC with stainless steel inserts) - 1 No. (iv) 16 amp. Moulded SMC rewireable kit-kat---1 no. (v) Suitable size hole at suitable location on rear wall for cable & wire entry in the connector box. (vi) Earthing bolt M6 x 20 mm

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/recessed conduit/sub main wiring/cable as required.

Supplying and replacement of following items, connection, testing etc. in the existing LT panel board as reqd. a)Ammeter 0-30A, 96mm x 96 mm

b)Volt meter 0-500 V, 96 mm x 96 mm

c) 32A, AC-3, 3 pole power contactor

d)Analogue Time Switch, 24 hours programmable.

e) 100 Amp, 4 pole MCCB, 30 kA

f) 63 Amp, TP&N & MCB, 10 KA C-curve

g)32A TP & N MCB - 10KA C-Curve

h) 6 amp to 32 amp SPMCBs C-Curve

i)32 amp DPMCB C-Curve

Digging out of 1 No. faulty PVC insulated, PVC sheathed/ XLPE power cable laid in gound and relaying of the same after removing of the cable fault i/c refilling and redressing of the trench etc. as reqd.