Delhi Development Authority Tender

Supplying Installation Testing and Commisssioning of 45 watt LED Street light fitting, highly efficient made of pressure die cast aluminium housing ,extruded aluminium heat sink & enclosed with toughened glass IP-66 protection and achieving not less than 5400 Lumens & fitting not more than 45 watt i/c welding with pole etc. complete as required.

Supplying of PVC insulated and PVC sheathed /XLPE Alumunium Armoured power cable of 1.1 KV grade direct in ground including making connections with suitable size of aluminum lugs, testing etc. as required.

2 x 16 Sqmm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

Upto 35 sq. mm

Above 35 sq. mm and upto 95 sq. mm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)

90 mm dia (OD-90 mm & ID-76 mm nominal)

Supply and fixing of pole cover of 3 mm thick sheet for existing 12 mtr GI octagonal pole with locking arrangement as same as required at site.

Supply and fixing galvanize nut suitable for existing 24 mm dia galvanised iron bolt etc complete as required at site.

supplying and fixing anti climbing device made with 10 mm Dia bar of 24 nos 300 mm long rods welded on 50x6 mm thck flat iron clamp suitable for fixing on pole, i/c galvanizing as per IS 2629 etc as complete required.(Drawing to be approved by Engineer in charge.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required

Supplying, erection and commissioning of HOT Dip galvanized octagonal steel pole of 12 mtr height i/c dismantling of existing LED fitting and old/ rusted pole made out of 3 mm thick sheet having bottom 210 mm A/F & top 90 mm A/F with built in connector control box with flush cover on height of 1000 mm from the bottom of pole, MS base plate of size 300 mm x 300 mm x 16 mm thick, the pole is to be fixed on existing RCC foundation with bolt and nuts making connection, interconnection with 2 nos. 3X 2.5 sq mm size of copper wire with thimble/ lugs in the connector box, earthing, making/ numbering of pole etc as required with following accessories with mounted in built in control box. a) 6 mm thick laminated sheet along with 2 nos. 6 Amp, 10KA, SP MCB, 'C' charcteristic on the din channel, 2 no. 63 Amp terminal block suitable for 16 sq.mm Aluminum condr. cable and din channel for MCB's. b) Earth stud weld at suitable height i/c washer, spring washers and nuts. c) Cable support clamps suitable for 2 nos. of 2x 16 sqmm Cable. d) galvanized single overhang 500 mm long bracket made from 48.3 OD ERW pipe for street light octagonal pole at 6 mtr height of pole i/c drilling holes of suitable size with suitable clamp for fixing of LED fitting as same as existing poleetc. as required. e) galvanized single overhang 1000 mm long bracket made from 48.3 OD ERW pipe for street light octagonal pole at top of pole i/c drilling holes of suitable size with suitable clamp for fixing of LED fitting as same as existing pole etc. as required. f) Drawing of pole shall be approved from the engineer incharge as per manufacturer before use at site. (rebate for old dismantled pole is inclusive in the rate and dismantled pole shall be the property of the agency and agency should quote the rates accordingly i/c rebate )

Providing and laying in position M 20 (1:2:4) reinforced cement concrete foundation of size 500 mm long x 500 mm wide and 1500 mm deep i/c excavation of earth, providing cutting, bending and placing in position reinforcement of cold twisted bar of 12 mm dia 1650 mm long (approx.) -8 Nos. and reinforcement ring of cold twisted bar of 8 mm dia 1800 mm long (approx.)-10 Nos. (with 150 mm spacing) i/c supplying of 4 Nos. M-24 x 750 mm long (150 mm top threaded portion) GI foundation bolt (EN- 8 grade) with 3 Nos. nuts and 2 Nos. washer, bolt along with 2 Nos. templates/ Anchor plate of size 320 mm x 320 mm x 4 mm thick having 4 Nos. 26 mm dia holes to match with PCD of poles base plate with positioning of foundation bolts and providing 63 mm (OD) 2 Nos DWC pipe for cable entry and exit as required. (Drawing to be approved by Engineer in charge.)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required

Single pole

Double pole

Fabricating, Supplying and Fixing of Angle iron , Steel Structure frame work fabricated out of 40mm x 40mm x 5mm (NS) Angle iron and Providing and Fixing Wiremesh of section 75 mm x25 mm (NS) Rectangular having weight not less than 7.75 Kg/sq. mtr and shall be fixed and supporting with 40mm x 5mm (NS) MS flat and the frame is to be grouted with ms angle not less than 30 cm in cement concrete 1:2:4 ( 1 Cement : 2 Coarse sand : 4 Graded stone aggregate 20 mm nominal size ) foundation , painted with two or more coats of red oxide primer and two coats of enamel paint and providing two leaf door with 12 no. hinges of size 75mm x 60mm x3mm in front , with two no. sliding door bolt of size 300 mm x 16 mm and 4 no. of godown lock for locking arrangement complete etc. as required . (Drawing to be approved by Engineer in charge.) A) Size of frame 1.2 Mtr Height x 1.5 Mtr Front x 0.9 Mtr Deep Cost for 7.38 Sq. mtr size MS frame

SITC of outdoor type Feeder pillar, cubical type fully compartmentalized made out of 2mm thick CRCA Sheet having IP55 protection with canopy, pedestal mounted, suitable for use on 415V, 3 Phase, 4 wire, 50 HZ and complete with powder coated painting through seven-tank process facility for pricking and degreasing, of suitable size for accommodating the following component, including providing detachable gland plate of 3 mm thick for incoming and outgoing cables entry, erected on cement concrete foundation made, complete with painting, interconnections, earthing, provision for protection from rain dust, fixed on MS angle iron frame work of size 50 mm x50 mm x 6 mm (NS) 100 cm long legs out of which 50 cm duly grouted in cement concrete 1:2:4 (1 cement: 2 sand: 4 stone) aggregate etc complete as required. (The dismantled panle shall be property of agency and agency quote accordingly i/c rebate) Incoming 1 No 125 Amps, 4P, MCCB (36kA) with thermomagnetic release, Handle and all required accessories. 1 Set phase indication lights (R,Y,B) Solid state type (LED). 1No. 0 to 500V, AC, Volt Meter with VSS & control fuses (AE Make) 1 No. 0 to 100 A, Ammeter class-1 accuracy (AE Make). BUSBAR 100 Amps Aluminium bus bars mounted on SMC supports. OUTGOINGS:- 5 A to 32 A rating, 240/415 V, 10 kA, "C" DP MCB.-- 7 Nos. Timer astronomical type Contactor-MNX 110

Supplying of PVC insulated and PVC sheathed /XLPE Alumunium Armoured power cable of 1.1 KV grade direct in ground including making connections with suitable size of aluminum lugs, testing etc. as required.

3.5 x 50 Sqmm

making trench less under ground hole across the road /pavements/cement concret pathway at adepth of about 1 meter by means of manual augour to drawing the pipe (up to 100 mm dia )/cable i/c making excavation on both side of road /pathway for making trenchless hole & refilling the same with excavated earth /soil after laying pipe /cable through trench less i/c proper ramming dressing, watering as per instruction of engineer-in-charge etc as required.