Delhi Development Authority Tender

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 16 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) A)8 way , Double door

Supplying and fixing 63 A rating, double pole, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 to 32 A rating, single pole 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of single poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) A)16 way , Double door

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

SITC of recess mounting maximum 36 watt LED backlit decorative type panel of size 2' x2' having minimum 3600 lumen fabricated with CRCA sheet steel housing duly power coated with high efficient LEDs &glare free full ,opal diffuser,IP 20 etci/cconnecton etc. complete as required.

Supplying of PVC insulated and PVC sheathed /XLPE Alumunium Armoured power cable of 1.1 KV grade direct in ground including making connections with suitable size of aluminum lugs, testing etc. as required.

2 x 16 Sqmm

3.5 x 35 Sq mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

Upto 35 sq. mm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)

SITC of recess mounting maximum 18 watt LED backlit decorative type panel of size 1' x1' having minimum 1800 lumen fabricated with CRCA sheet steel housing duly power coated with high efficient LEDs & glare free full ,opal diffuser,IP 20 etc i/c connecton etc. complete as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required

Supply Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supplying & Replacement of 18 W, 4 feet LED batten, extruded Aluminium body with PC diffuser, 6500 K i/c fixing, testing connecton etc. complete as required.

Supplying.Installation/ replacement ,Testing and commissioning of 36 W, 4 feet LED batten, extruded thermoplastic body with PC diffuser, 6500 K i/c fixing, testing connecton etc. complete as required.

Supplying and replacement of old/ worn out 2'x 2' conventional fitting with surface mounting maximum 36 watt LED panel of size 2' x2' having minimum 3600 lumen fabricated with CRCA sheet steel housing duly power coated with high efficient LEDs &glare free full ,opal diffuser,IP 20 etci/cconnecton etc. complete as required. (The dismantled fitting shall be property of agency and agency quote accordingly i/c rebate)

SITC of Surface mounting maximum 18 watt LED backlit decorative type panel of size 1' x1' having minimum 1800 lumen fabricated with CRCA sheet steel housing duly power coated with high efficient LEDs & glare free full ,opal diffuser,IP 20 etc i/c connecton etc. complete as required.

Supplying & Replacement of 15 W, Neo max LED bulb minimum 1575 lumen i/c fixing, testing connecton etc. complete as required.

making trench less under ground hole across the road /pavements/cement concret pathway at a depth of about 1 meter by means of manual augour to drawing the pipe (up to 100 mm dia )/cable i/c making excavation on both side of road /pathway for making trenchless hole & refilling the same with excavated earth /soil after laying pipe /cable through trench less i/c proper ramming dressing, watering as per instruction of engineer-in-charge etc as required.

supply and replacement of old /worn out post top lantern with maximum 40 watt LED post top lantern having minimum 4400 lumen powder coated aluminium die cast and spun aluminium body with clear/ opal diffuser,IP 65 and 5700 K i/c connection etc complete as required, (The dismantled fitting shall be property of agency and agency quote accordingly i/c rebate)

Supply Installtion Testing and Commisionining of 400 mm max air pedestal fan with stand base i/c connection etc complete as required.

Supplying & replacement of existing worn-out/old/ out of service light fittings 70 W LED with 70 Watt LED flood light fitting complete with suitable lens & other accessories highly efficient made of pressure die cast aluminium housing ,extruded aluminium heat sink& enclosed with toughened glass IP-66 protection and achieving 7700 Lumens & fitting not more than 70 watt i/c making modification in exting bractkets according to LED flood light fitting i/c connection testing complete as per technical specifications attached etc as required.(The dismantled fitting shall be property of agency and agency quote accordingly i/c rebate)

Supplying and Testing of 200 Watt LED flood light fitting complete with suitable lens & other accessories highly efficient made of pressure die cast aluminium housing ,extruded aluminium heat sink& enclosed with toughened glass IP-66 protection and achieving 26000 Lumens & fitting not more than 200 watt i/c making modification in exting bractkets according to LED flood light fitting i/c connection testing complete as per technical specifications attached etc as required.

Supplying and Testing of 25 Watt LED street light fitting complete with suitable lens & other accessories highly efficient made of pressure die cast aluminium housing ,extruded aluminium heat sink& enclosed with toughened glass IP-66 protection and achieving 2750 Lumens & fitting not more than 25 watt i/c making modification in exting bractkets according to LED street light fitting i/c connection testing complete as per technical specifications attached etc as required.

Supplying & replacement of existing worn-out/old/ out of service light fittings 400 Watt conventional fitting with 180 Watt LED Street light fitting complete with suitable lens & other accessories highly efficient made of pressure die cast aluminium housing ,extruded aluminium heat sink & enclosed with toughened glass IP-66 protection and achieving 16500 Lumens & fitting not more than 150 watt i/c making modification in exting bractkets according to LED street light fitting i/c connection testing complete as per technical specifications attached etc as required.(The dismantled fitting shall be property of agency and agency quote accordingly i/c rebate)

Supplying and drawing 3X2.5 sq mm of FRLS PVC insulated copper condutor, three core cable for the existing pole,i/c connection,testing etc. complete as required.

SITC of Surface mounting mirror light maximum 12 watt LED Battent decorative type 2 feet having minimum 990 lumen fabricated with thermoplastic body with pc diffuser in square shape CRI 80 with high efficient LED & glare free full ,opal diffuser,IP 20 etc i/c connecton etc. complete as required.

Supplying, erection and commissioning of HOT Dip galvanized iron octagonal pole of 10 mtr height i/c dismantling of existing LED fitting and old/ rusted pole made out of 3 mm thick sheet having bottom 175 mm A/F & top 70 mm A/F with built in connector control box with flush cover having min 2 nos of strips of size 50 mm width x 3 mm thick duly welded on pole cover to surrounded the G.I. pole it is theft free on height of 2000 mm from the bottom of pole, MS base plate of size 275 mm x 275 mm x 16 mm thick, the pole is to be fixed on existing RCC foundation with bolt and nuts making connection, interconnection with 4 nos. 3X 2.5 sq mm size of copper wire with thimble/ lugs in the connector box, earthing, making/ numbering of pole etc as required with following accessories with mounted in built in control box. a) 6 mm thick laminated sheet along with 4 nos. 6 Amp, 10KA, SP MCB, 'C' charcteristic on the din channel, 4 no. 63 Amp terminal block suitable for 16 sq.mm Aluminum condr. cable and din channel for MCB's. b) Earth stud weld at suitable height i/c washer, spring washers and nuts. c) Cable support clamps suitable for 4 nos. of 2x 16 sqmm Cable. d) 4 Nos of M24X750 long 'J' type EN 8 grade foundation bolts including nut and washerd e) suitable size ' G.I. circular ring '' on top of pole 100 mm overall dia madeout of 40 mm GI pole with suitable size canopy to be ocupied top of 10 mtr pole to fit 4 nos LED flood light fittings in proper angle i/c drilling holes of suitable size with suitable clamp for fixing of LED fitting etc. as complete as required.. f) Drawing of pole shall be approved from the engineer incharge as per manufacturer before use at site.

Providing and laying in position M 20 (1:2:4) reinforced cement concrete foundation of size 500 mm long x 500 mm wide and 1500 mm deep i/c excavation of earth, providing cutting, bending and placing in position reinforcement of cold twisted bar of 12 mm dia 1650 mm long (approx.) -8 Nos. and reinforcement ring of cold twisted bar of 8 mm dia 1800 mm long (approx.)-10 Nos. (with 150 mm spacing) i/c supplying of 4 Nos. M-24 x 750 mm long (150 mm top threaded portion) GI foundation bolt (EN- 8 grade) with 3 Nos. nuts and 2 Nos. washer, bolt along with 2 Nos. templates/ Anchor plate of size 320 mm x 320 mm x 4 mm thick having 4 Nos. 26 mm dia holes to match with PCD of poles base plate with positioning of foundation bolts and providing 63 mm (OD) 2 Nos DWC pipe for cable entry and exit as required. (Drawing to be approved by Engineer in charge.)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required .

3 Module

4 Module

6 Module

8 Module

12 Module

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required,

5/6 amps switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supply installation testing and commissioning of crisp air exhaust fan with white plastic body etc complete as required

250 mm

300 mm

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 63 A.

Supplying and fixing metal box of 150 mm X 75 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required

Supply and fixing of following size electric air curtain with sensor (euronics or equivalent) on surface of entry/exit door i/c testing and commissioning of item etc complete as required.(item should be approved by engineer incharge)

6'' (6 feet) with sensor.

4'' + 3" (7 feet) with sensor.