Council Of Scientific And Industrial Research Tender
... More
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Council Of Scientific And Industrial Research - CSIR Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date26 Dec 2024
Closing Date15 Jan 2025
Tender Amount₹ 44,24,992
Costs
EMD
₹ 88,500Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_CSIR_221308_1Bid Award Id
ViewTender No
11-5(207)/2024-EnggTender Authority
Council Of Scientific And Industrial Research ViewPurchaser Address
-Website
http://https://www.csir.res.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
3.52
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
1
-
-
... More
1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
3.68
-
-
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor block , plain window sills,fillets, steps of risers & treads etc. up to floor five level, excluding the cost of centering,shuttering and finishing : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
0.1
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
0.14
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Shelves ( Cast in situ)
0.48
-
-
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars.
19
-
-
... More
Brick work with F.P.S. bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
2.53
-
-
... More
Half brick masonry with F.P.S. bricks of class designation 7.5 infoundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand)
5
-
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
Cement mortar 1:4 (1 cement :4 coarse sand)
25
-
-
... More
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.
-
-
-
... More
Raj Nagar Plain white marble /Udai pur green /Zebra white marble area of slab over 0.5 sqm
2.4
-
-
... More
Granite of any colour and shade Area of slab over 0.50 sqm.
14
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete: 200x300 mm minimum.
80
-
-
... More
Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.
32
-
-
... More
Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. 8mm thick Granite of any colour and shade.
5.76
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
Granite stone slab of colour black, Cherry/Ruby red
-
-
-
... More
Area of slab upto .5 sqm
4
-
-
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
Granite work
10
-
-
... More
extra for providing opening of required size and shape for wash basin …
4
-
-
... More
Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with :
Decorative veneer facings of approved manufacture
6.4
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for seperately ): Second class teak wood
0.5
-
-
... More
Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).18 mm thick
7.55
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :
35 mm thick including ISI marked stainless steel but hinges with nuts and screws .
12.3
-
-
... More
Supplying of IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer( having brand logo with ISI, IS :3564, embossed on the body , door weight up to 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete.
32
-
-
... More
Supplying of chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc complete in all respect.
25
-
-
... More
Supplying of special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete : Size 50 mm
25
-
-
... More
Supplying of chromium plated brass handles with necessary screws etc. complete :
-
-
-
... More
125 to 150mm
5
-
-
... More
100 mm
15
-
-
... More
Supplying of aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
... More
300 x 10mm
15
-
-
... More
150x10mm
10
-
-
... More
100x10mm
21
-
-
... More
Supplying of aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :100mm
10
-
-
... More
Supplying of aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. each
5
-
-
... More
Providing & fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality : 1.0 mm thick.
20.4
-
-
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured)
2
-
-
... More
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :
2nd class teak wood
-
-
-
... More
50x12 mm
1
-
-
... More
50 x 20 mm
1
-
-
... More
Supplying of ISI marked IS : 1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (copper oxidized as per IS: 1378)
-
-
-
... More
100x58x1.90 mm
5
-
-
... More
75x47x1.70 mm
5
-
-
... More
Supplying & fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete
-
-
-
... More
125x64x1.90 mm
5
-
-
... More
100X58X1.90 mm
5
-
-
... More
75x47x1.80 mm
5
-
-
... More
Supplying of aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
-
-
-
... More
Twin rubber stopper
25
-
-
... More
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
... More
In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
50
-
-
... More
In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.
50
-
-
... More
Providing and fixing ball bearing for existing rolling shutters.
10
-
-
... More
Providing & fixing mechanical device chain and crank operation for operating existing rolling shutters
-
-
-
... More
Exceeding 10.00 sqm and upto 16.80 sqm in the area
6
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
1
-
-
... More
Welding by gas or electric plant including transportation of plant at etc. complete
1
-
-
... More
Taking out existing wooden door shutter , repair by cutting , painting etc. and refixing of reoaired door shutters to existing door frames , including repplacement of hinges with screws , etc. as required , all complete as per the direction of Engineer -in- charge
15
-
-
... More
Providing and laying dual charged Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade,skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average With ready mixed pink or Grey primer of approved brand 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm
9
-
-
... More
Providing and laying dual charged Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average With ready mixed pink or Grey primer of approved brand 6 mm thickness, including grouting of joints . Size of Tile 600x600 mm
65
-
-
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White,
Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.
48
-
-
... More
Providing and fixing on wall face un plasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes. 110 mm diameter.
35
-
-
... More
Providing and fixing on wall face un plasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes. 75mm diameter
12
-
-
... More
Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheets and galvanised in accordance with zinc coating of 120 gms/sqm ( both side inclusive) as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax50mm long with 6mm dia bolts,other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts& bolts of required size and other end of angle hanger being fixed with intermediate G.I. channels 45x15x0.9mm running at the spacing of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diax230mm long.
-
-
-
... More
G.I. wire at every junction including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230 mm c/c including jointing and fixing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes, finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joints and two coats of primer suitable for board, all as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part I.
58
-
-
... More
Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.
-
-
-
... More
2 mm thick flat.
2.4
-
-
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using J hook with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
3.6
-
-
... More
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture spintone/cosmos / Hexa or equivalent of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main 'T' runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross "T" of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main'T' at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture (Spintone / Cosmos/hexa) in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required
83
-
-
... More
Main 'T' runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main 'T' , bottom exposed with 24 mm of all T-sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by engineer-in-charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection 85%, non - combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/m 0 KC.
-
-
-
... More
Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs ncorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified
18
-
-
... More
12mm cement plaster of mix: 1:6 (1 cement :6 coarse sand)
95
-
-
... More
Applying one coat of cement primer of approved brand and manufacture on wall surface :Cement Primer
183
-
-
... More
Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) sqm
38
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade including primer with ordinary paint of approved brand and manufacture.
16
-
-
... More
French spirit polish : Two or more coats on new works including a coat of wood filler.
25
-
-
... More
Providing and applying white cement based putty of average thickness 1mm , of approved brand and manufacturer, over the plastered wall surface even and smooth complete.
356
-
-
... More
Removing white/OBD/plasti paint or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
1478.75
-
-
... More
Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats).
59
-
-
... More
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coat onold work.
3055
-
-
... More
Painting with synthetic enamel paint of approved brand one or more coat on old work
285
-
-
... More
Finishing walls with textured exterior paint of required shade : Old work (Two or more coats on existing cement paint urface applied @ 3.28 ltr/10 sqm.
648
-
-
... More
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface.
298
-
-
... More
Melamine polishing on wood work (one or more coat)
90
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
Two or more coats on new work
20
-
-
... More
Finishing walls with water proofing cement paint of required shade :
Old work (one or more coats @ 2.20 kg/10 sqm) complete
25
-
-
... More
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead : With cement mortar 1:4 (1cement: 4 coarse sand).
64
-
-
... More
Renewing glass panes with snap beading whereever necessary including taking out old glass panes: float glass 5 mm thick.
21
-
-
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40mm dia. M.S. tube 1.5 m centre to centre horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.
86
-
-
... More
Cleaning of terrace/loft water storage tank (inside surface area) upto 5000 litre capacity at all heights with coconut brushes, duster etc.,
removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity f tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)
50000
-
-
... More
Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer -in - Charge.
Nominal concrete 1:3:6 or richer mix(including design mix )
3
-
-
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in - Charge.
3
-
-
... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10mm to 25mm
150
-
-
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
48
-
-
... More
Dismantling false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
26
-
-
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground from CSIR Complerx or as approved by Engineer-in-charge, beyond municipal limit, for all leads including all lifts involved.
70
-
-
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
-
-
-
... More
Of area 3 sq. metres and below
4
-
-
... More
Of area beyond 3 sq. metres
2
-
-
... More
Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead :
-
-
-
... More
Up to 10 mm thick
1
-
-
... More
Thickness above 10 mm up to 25 mm
75
-
-
... More
Dismantling cement asbestos or other hard board ceiling and grid false ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.
125
-
-
... More
Dismantling of flushing cistern (PVC/Vitreous China), sink, wash basin, WC pans, urinals, etc including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
10
-
-
... More
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50mm thick compacted bed of course sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-in-charge.
20
-
-
... More
Providing and fixing mirror of superior glass(of approved quality)and of required shape and size withplastic moulded frame of approved make and shade with 6 mm thick hard board backing:
-
-
-
... More
Rectangular shape 453 x357 mm
8
-
-
... More
Oval shape 450x350 mm (outer dimensions)
9
-
-
... More
Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms.
15
-
-
... More
Replacement (provinding&fixing new) of existing infrared sensor for urinal having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side,including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-incharge.
15
-
-
... More
Providing and fixing white vitreous china EWC single peice wall hung type water closet with seat and lid, 10 litre low level white vitreous china flushing cistern & CP flush bend with fittings & CI brackets, including painting of fittings and brackets,cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete including cutting and making good the walls and floors where ever required. all compete as per the direction of Engineer in Charge.
8
-
-
... More
Supplying of 8mm dia C.P/S.S jet with fexible tube upto 1metre long with S.S triangular plate to Europeon type W.C of quality and make( Prayag, Jaquar or equivalent) as approved by Engineer -in-charge.
35
-
-
... More
Supplying & Fixing CP brass Bottle Trap (with Internal Partition) 32mm size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange for wash basins (Make - Prayag, Jaquar or equivalent) complete in all respect.
20
-
-
... More
Supplying & Fixing of P.V.C. waste pipe for sink or wash basin including
P.V.C. waste fittings complete.
-
-
-
... More
32 mm dia
10
-
-
... More
40 mm dia
5
-
-
... More
Supplying & Fixing of CP brass toilet paper holder
5
-
-
... More
Providing and fixing PTMT liquid soap container 109mm wide , 125 mm high and 112 mm distance from wall of standard shape with bracket of the same material with snap fittings of approve quality and colour, weighing not less than 105 gms.
10
-
-
... More
Providing & Fixing GI pipes complete with GI fittings and clamps, including cutting & making good the walls etc. 50 mm dia nominal bore.
20
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
... More
50 mm nominal bore
2
-
-
... More
80 mm nominal bore
1
-
-
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)
-
-
-
... More
40 mm nominal bore
2
-
-
... More
50mm nominal bore
4
-
-
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore.
3
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore. 15mm nominal bore
10
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m
spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
-
-
-
... More
25 mm nominal outer dia Pipes
20
-
-
... More
40 mm nominal outer dia Pipes
20
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings , i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one
step CPVC solvent cement and cost of cutting of chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
concealed work , including cutting of chases and making good the walls etc
-
-
-
... More
25mm nominal outer dia pipes
42
-
-
... More
32mm nominal outer dia pipes
28
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one
step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.
External work
-
-
-
... More
25 mm nominal outer dia Pipes
10
-
-
... More
40 mm nominal outer dia Pipes
5
-
-
... More
50 mm dia nominal bore
5
-
-
... More
Supplying & Fixing of unplasticised PVC connection pipe with brass unions : 45 cm length , 15 mm nominal bore
25
-
-
... More
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :
-
-
-
... More
15 mm nominal bore
8
-
-
... More
20 mm nominal bore
8
-
-
... More
25 mm dia nominal bore
8
-
-
... More
32 mm dia nominal bore
4
-
-
... More
40 mm nominal bore
4
-
-
... More
50 mm dia nominal bore
6
-
-
... More
Providing and fixing C.P brass extention nipple ( size 15mmx50mm) of approved make and quality as per direction of EIC.
10
-
-
... More
Supplying & Fixing of PTMT grating of approved quality and colour, Circular type 100 mm Dia. Nominal bore
22
-
-
... More
Supplying & Fixing of PTMT Ball cock of approved quality . Colourand make complete with Epoxy coated aluminium rod with L.P/ H.P.H.D.plastic ball.
-
-
-
... More
15mm nominal bore.150mmlong, weighing not less than 138gms.
2
-
-
... More
25mm nominal bore.152mmlong, weighing not less than 440gms.
3
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) :
-
-
-
... More
For fixed portion
Powdwer coated aluminium (minimum thickness of powder coating 50 micron)
193.2
-
-
... More
For shutters of doors, windows' & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost pvc neoprene gasket required (Fittings shall be paid for separately).
Powdwer coated aluminium (minimum thickness of powder coating 50 micron)
121.6
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.
(Cost of aluminium snap beading shall be paid in basic item ) : With float glass panes of 5.00 mm thickness
15
-
-
... More
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
15
-
-
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
18
-
-
... More
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and
disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. 25 mm average thickness
6
-
-
... More
Cleaning of reinforcement from rust from the reinforcing bars to giveit a total rust free steel surface by using alkaline chemical rust
remover of approved make with paint brush and removing looseparticles after 24 hours of its application with wire brush and thoroughly
washing with water and allowing it to dry, and applying anti rust primer befor bond coat all complete as per direction of Engineer-In-Charge.Bars upto 12 mm diameter.
13
-
-
... More
Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. SBR Polymer (@10% of cement weight) modified
cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer.
6
-
-
... More
Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement:4 graded coarse sand with polymer minimum 2% by wt. of cement used) .25 mm average thickness in 2 layers. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).
6
-
-
... More
Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored
to the concrete surface by means of “L” shaped mild steel shear key welded with existing reinforcement including the cost of materials,
labour, tool & plants as approved by Engineer-in-charge.
5
-
-
... More
Providing and fixing CP brass sensotronic sensor faucet for washbasin with 175mm extension body. All complete as per direction of EIC.
12
-
-
... More
Supplying of hand Spray (Health Faucet) of Jaquar make or equivalent with 8mm dia 1m long PVC tube of approved brand as per direction of Engineer-in-charge.
39
-
-
... More
Providing & Fixing reflective type Sun control film of Garware or its equivalent make of approved quality colour as per the direction of Engineer in Charge including fixing into the existig windows/ door glass complete with all respect as per the the direction of Engineer in Charge.
25
-
-
... More
Providing and fixing decorative customized glass film 3M make of desired pattern complete in all respect as per direction of engineer incharge.
42
-
-
... More
Providing & Fixing Vertical blinds 100mm with soft textured acrylic of any shade of Vista/Mac or equivalent make of approved quality,colour on the existing windows including cost of all materials such as brackets,plugs, screws etc. complete in all respect as per the the direction of Engineer in Charge.
26
-
-
... More
Providing and fixing float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) on Table top complete as per the directions of engineer-in-charge
33
-
-
... More
Providing fixing Stainless Steel glass door lock with strike box (without cut out) for frame less toughened glass doors match with existing door fittings with SS screws etc. complete as per direction of Engineer-in-charge.
8
-
-
... More
Supply of welder with necessary tools like welding machine grinder machine with cutter blades, hammer, screw drivers and any other items for day to day maintenance work and other new welding work required at site. The rate is inclusive of welding rod of approved make and all items required for repair of staircase chequred plate & sections work no additional payment will be made in this regard.
8
-
-
... More
Supply of Plumber on regular basis throughout the year for day to day maintenance of CSIR Cx., HRDG GH, TKDL 3rd floor, IPU GF, CSIR-HQ & CSIR Science Centre with necessary tools like Plas, Tota Plas,Screw Driver hammer, grinder macine with cutter blades( both for stone,RCCwork) and any other items for day to day maintenance work and other assoclated additional Plumbing work required at site. The rate is inclusive of EPF, ESI as per Govt. norms and all items required for the works no any additional payment will be made in this regard. (Man days of regular plumber will be 26 days in a month throughout the year (12 months) & wherever materials required wiil be provided by department)
12
-
-
... More
Supply of Carpenter on regular basis throughout the year for day to day maintenance of CSIR Cx., HRDG GH, TKDL 3rd floor, IPU GF, CSIR-HQ & CSIR Science Centre with necessary tools for doing carpentry work/attending day to day maintenance work and other assoclated additional Carpentry work required at site. The rate is inclusive of EPF, ESI as per Govt. norms and all items required for the works no any additional payment will be made in this regard. (Man days of regular plumber will be 26 days in a month throughout the year (12 months) & wherever materials required wiil be provided by department)
12
-
-
... More
Supplying of helper to assist plumber & carpenter and doing other miscellaneous works of CSIR Cx., HRDG GH, TKDL 3rd floor, IPU GF, CSIR-HQ & CSIR Science Centre with complete tools required for completing his job complete as per the direction of EIC.
67
-
-
... More
P& F 40 to 50cm deep full height & low height storage cabinets made out of 19mm thick commercial wooden board with horizontal shelves at every 400 to 500mm height and vertical partition at every 600 to 900mm intervals including shutter fixed with piano hinges , magnetic catcher, godrej brass lock 50mm and 100 CP brass handles and back of storage cabinet with 6mm thick ply. also 1.00mm thick lamination shall be fixed with head less nails / adhesive with groove or without groov on all exposed surface of front/top/sides wooden board and secondclass teak wood 19mm x6mm margin on all all exposed surface of board edges and sides of shutters and shall be finished with melamine polish and all inner surface shall be finished with synthetic enamel paint complete in all respect as per design and drawing. (front elevation area of storage unit shall be measured for the purpose of payment )
2
-
-
... More
Supplying of CP brass sink mixer of approved quality confirming IS 8931, the minimum chromium plating thickness at all points of plated bodysection and knob shouild not be less than 0.3 micron.and confirm IS1068, complete with All respect as per direction of Engineer in Charge. 15 mm nominal dia bore complete in all respect.
12
-
-
... More
Supplying of swan neck tap with right hand operating knob of Parko or its equivalent of approved quality confirming IS 8931, the minimum chromium plating thickness at all points of plated bodysection and knob shouild not be less than 0.3 micron.and confirm IS1068, complete with All respect as per direction of Engineer in Charge.
7
-
-
... More
Providing &Fixing 19 mm thick commercial wooden board of Centuary, Duro or equivalent make over the partition walls & cupboards fixed with nails/screws etc.complete with all respect and as per the direction of the Engineer in Charge.
19.2
-
-
... More
Providing &Fixing 6 mm thick commercial ply wood of centuary, Duro or equivalent make over the partition walls & cup boards fixed with nails/screws etc. to the wooden frames and as per the direction of the Engineer in Charge.
12
-
-
... More
Annual Maintenance of existing Automatic door systems installed at CSIR complex, CSIR Science centre & HQ from authorised dealer/company i.e. Dorma/Ozone, which includes monthly mandatory service of four doors installed at various locations (The material will be provided by department, if required) complete as per direction of EIC.
4
-
-
... More
Comprehensive Annual Maintenance of existing Urinal sensors & Tap sensor installed at CSIR complex, IPU 3rd floor, TKDL GF, CSIR Science centre & HQ at Satsang vihar from authorised dealer/company, which includes regular monthly inspection,service and replacement & repair of all parts such as eye ball, solinoidal valve, Duracell etc. complete as per directio of EIC.
40
-
-
... More
Supplying of brass cylindrical locks of make Godrej or equivalent with necessary screws & bolts etc. complete.
10
-
-
... More
Supplying of 32 mm C.P. brass heavy (full threaded) waste coupling (Make - Prayag, Jaquar, Cera or equivalent) complete.
2
-
-
... More
Supplying of 32 mm PTMT urinal waste coupling (Make - Prayag or equivalent) complete.
2
-
-
... More
Supplying of C.P. brass angle valve with wall flange complete (Make - Prayag, Jaquar or equivalent) : 15 mm nominal bore
(Basic Cost - Rs 900/-)
5
-
-
... More
Supply of C.P. brass two-in-one angle valve wall flange complete (Make - Prayag, Jaquar or equivalent) : 15 mm nominal bore
(Basic Cost - Rs 1200/-)
10
-
-
... More
Supplying of C.P. brass long body Bib Cock with wall flange, complete in all respect (Make - Prayag, Jaquar or equivalent) : 15 mm nominal bore
(Basic Cost - Rs 1050/-)
5
-
-
... More
Supplying of C.P. brass Bib Cock with wall flange, complete in all respect (Make - Prayag, Jaquar or equivalent) : 15 mm nominal bore
(Basic Cost - Rs 800/-)
5
-
-
... More
Providing & Fixing round shaped doom type AISI-304 stainless steel grating 5" dia (Make - PRAYAG or equivalent) complete in all respect.
(Basic Cost of 5" SS grating - Rs 400/-)
5
-
-
... More
Providing & Fixing ISI mark PVC flush Cistern (10 lit) (Make - PRAYAG or equivalent) complete in all respect.
(Basic Cost of Cistern - Rs 1800/-)
7
-
-
... More
Supplying ISI mark PVC toilet seat covers (Make - PRAYAG or equivalent) complete in all respect.
(Basic Cost of Toilet seat cover - Rs 630/-)
10
-
-
... More
Supplying CP brass urinal spreader (Make - PRAYAG or equivalent) complete in all respect.
(Basic Cost of Urinal spreader - Rs 400/-)
2
-
-
... More
Supply of plastic Shower Curtains for bathrooms in all designs and shade as approved by Engineer-in-Charge.
2
-
-
... More
Providing and fixing stainless steel curtain rods of 25mm dia with two stainless steel brackets fixed with brass screws and rings for curtain rods, etc. wherever necessary complete.
2.2
-
-
... More
Providing and fixing double action hydraulic floor spring of make ÓZONE' for toughened glass doors, embedding in floors as required and matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
With stainless steel cover plate minimum 1.25 mm thickness
8
-
-
... More
Supply of 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture spintone/ cosmos / Hexa or equivalent of size 595x595 mm. The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection 85%, noncombustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/m 0 KC.
30
-
-
... More
Providing and fixing white vitreous china wall/ floor hung EWC dual flush set with matching colour Anti-Microbial jet spray seat cover, C.P. brass hinges and rubber buffers including flushing cistern with dual flush fittings (internal & external), chair for wall mounting complete including painting of brackets, cutting and making good the walls and floors wherever required. (Make -Prayag, Jaquar, Cera, Perryware, hindware or equivalent)
(Basic Cost - Rs 10000/- each)
2
-
-
... More
Providing and fixing under counter white/coloured washbasin of size 560mm x 470 mm of make CERA, Parryware or equivalent with CI/ MS brackets, 32 mm CP brass waste of standard pattern, including painting of fittings and brackets cutting and making good the walls whwre ever required all complete as per direction of EIC.( basic cost of the wash basin -Rs. 3000/- each).
7
-
-
... More
Supplying of PVC cistern fittings as per the direction of Engineer-in-Charge.
20
-
-
... More
Supplying of PVC chrome plated Super Flow Cistern Handles
7
-
-
... More
Supplying of Super Flow Cistern standing Ballcock
7
-
-
... More
Supplying of Rendroc Plug, water proofing material ( make FOSROC ) at site complete as per direction of EIC.
100
-
-
... More
Pointing of joints (with water proofing compound) of kota stone flooring by cutting the joints upto 5mm wide and grinding , polishing of same kota stone with all required material and making the surface smooth and levelled all complete as per the direction of Engineer-in-charge.
300
-
-
... More
Buy back of dismantled flush door shutters with chowkats including all the fittings i.e. tower bolts , sliding door bolt and hydrolic door closer etc.and taking the same out of campus .- Of area less than 3.0 sqm.
5
-
-
... More
Buy back CP brass bath fittings such as short /long body bib cocks, concealed stop-cock, angle valve, basin mixer, Tap & Urinal sensor etc. dismantled from toilets and kitchens. 15 mm nominal bore
20
-
-
... More
Buy back CP brass tubular door lock/CP brass mortice door lock etc.and taking the same out of campus.
10
-
-
... More
Buy back floor spring and hydrolic door closer etc.and taking the same out of campus.
6
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements