Central Road Research Institute Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Central Road Research Institute - CRRI Tender
Eprocure
Opening Date24 Nov 2021
Closing Date1 Dec 2021
Tender Amount₹ 36,06,670
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Renovation Of Cafeteria Building Of The Institute And Replacement/repair Of The Roofs Of Acsir/pgrp Building And Noise Testing Lab. At Crri, New Delhi-110025
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_CSIR_95778_1Bid Award Id
ViewTender No
QSP/ESS/Cafeteria-Reno/2021Tender Authority
Central Road Research Institute ViewPurchaser Address
-Website
http://https://www.csir.res.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within CRRI campus as directed by the Engineer-in-charge.
-
-
-
... More
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
1
-
-
... More
Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material within CRRI campus as directed by the Engineer-in-charge.
5
-
-
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking/depositing within CRRI Campus as directed by the Engineer-in-Charge.
-
-
-
... More
Of area 3 sq. metres and below
4
-
-
... More
Of area beyond 3 sq. metres
2
-
-
... More
Taking out doors, windows and clerestory windows (steel or wood) shutter etc. complete and stacking/depositing within CRRI store as directed by the Engineer-in-Charge.
-
-
-
... More
Of area 3 sq. metres and below
2
-
-
... More
Dismantling old plaster or skirting, wall tile floor vitrified tiles raking out joints and cleaning the surface for plaster including disposal of rubbish within CRRI campus or as directed by the Engineering in Charge.
106
-
-
... More
Dismantling grass packed tiles/wooden boarding/cement asbestos or other hard/soft board ceiling tiles in false ceiling or partition walls/Panelling including frame work with stacking and depositing of serviceable materials and disposal of unserviceable materials within CRRI campus as directed by the Engineer in Charge.
169
-
-
... More
Dismantling G.I. pipes (external / Internal work) including excavation, refilling trenches , cutting of the walls & making good the same. Finally taking out the pipes, manually/by mechanical means including stacking of pipes within CRRI Main Store as directed by the Engineer in Charge
-
-
-
... More
15 mm to 40 mm nominal bore.
7
-
-
... More
Dismantling of washbasin/ W.C.'s & its fittings including stacking & depositing of useful material in the CRRI Main Store & disposal of unserviceable material within CRRI campus as directed.
2
-
-
... More
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within CRRI campus as directed by the Engineer-in-Charge.
1645
-
-
... More
Dismantling cement asbestos/Acrylic sheet or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within CRRI campus as directed by the Engineer-in-Charge.
732
-
-
... More
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth within CRRI campus as dirceted by Engineer-in-Charge: All kinds of soil : All kinds of soil.
9
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within CRRI campus as dirceted : All kinds of soil
2
-
-
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete as dirceted by Engineer-in-Charge
3
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
2
-
-
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond CRRI campus, for all leads including all lifts involved. Complete as directed by the Engineer in Charge. (for payment actual cubical content of dismantled material will be taken to the respective items)
22
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
1:4:8 (1cement: 4coarse sand:8 graded stone aggregate 40mm nominal size)
6
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
2
-
-
... More
Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) .
2
-
-
... More
Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)
4
-
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level : Cement mortar 1:4 (1 cement : 4 coarse sand)
2
-
-
... More
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
2
-
-
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
6
-
-
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
6
-
-
... More
Centering and shuttering including strutting,propping etc. and removal of form for:
-
-
-
... More
For Shelves (Cast in situ)
2
-
-
... More
Edges of slabs and breaks in floors and walls : Under 20 cm wide
24
-
-
... More
Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick
121
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick
68
-
-
... More
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).
-
-
-
... More
Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
116
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Cold twisted bar.
2400
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering,finishing and reinforcement :
-
-
-
... More
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
20
-
-
... More
12 mm cement plaster of mix : 1:6 (1 cement : 6 coarse sand)
37
-
-
... More
15 mm cement plaster on rough side of single or half brick wall of mix: (1 cement : 6 coarse sand)
173
-
-
... More
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)
137
-
-
... More
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within CRRI Campus as directed by the Engineering in Charge. with cement mortar 1:4 (1 Cement : 4 Coarse sand)
20
-
-
... More
Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
116
-
-
... More
Providing and fixing 18 mm thick granite stone gang saw cut mirror polished premoulded and prepolished machine cut for kitchen platforms, vanity counters, window sills, facias, columns, beams and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding, scaffolds and polishing to edge to give high gloss finish etc. complete at all levels as directed by the engineer-in-charge .
-
-
-
... More
Granite of any colour & shade. and Any area of slab.
3
-
-
... More
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
49
-
-
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
2
-
-
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
-
-
-
... More
Polished Granite stone slab any colour & shade and any area.
97
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).
-
-
-
... More
Sal wood
0.13
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
-
-
-
... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
5
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately)
-
-
-
... More
18 mm thick
19
-
-
... More
Providing & fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality 1.0 mm thick.
6
-
-
... More
Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge.
14
-
-
... More
Brass Handles 100mm of approved design shade and color with neccesory screw etc.
7
-
-
... More
Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-incharge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately)
6
-
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
596
-
-
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
622
-
-
... More
Providing and Fixing 3 mm thick poly carbonate sheet fixing in roof include with top support of metal strip screw fastenar etc complete in all respect as directed by Engineer -in- charge
52
-
-
... More
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns
using self drilling/ self tapping screws complete :
-
-
-
... More
Ridges plain (500 - 600mm)
49
-
-
... More
Gutter (600 mm over all girth)
109
-
-
... More
Providing and fixing powder coated (approved colour & shade) aprroved quality standard interlocked micro-perforated metal (steel) ceiling tiles (app. 600x600 mm size) without infilled fibreglass system of Armstrong or equivalent make to be fixed/ interlocked to the approved /standard interlocking ceiling frame laid in true horizontal level suspended on inter locking metel grid of hot dipped galvanised steel sections, consisting of main "T" runner & L-sections etc, to form grids of app. 600x600mm. The rate shall also includes the provision of cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc, where ever required. Main "T" runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6mm dia. wire and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised level clips spaced at 1200 m centre to centre along main T, bottom exposed width of standard or app. 24mm of all L & T -sections shall be pre-painted with polyester paint, all complete at all heights as per standard specifications or as directed by the Engineer-in-Charge, with infilled fibreglass system of Armstrong or equivalent make
104
-
-
... More
Providing and fixing 10 to 20 mm thick plaster of paris (gypsum on hydrous) ceiling upto a height of 10 m above floor level over the frame of standard G.I frame section (approved quality & manufacturer) fixed at different levels by making a grid of 600x600 mm or as per standard specification, over the G.I section frame including P/F standard POP-ceiling wire mesh of approved quality in the vertical & horizontal level as per desigh requirements The frame shall be suspended from ceiling by standard level adjusting hangers or standard G.I section hangers as per requirement, fixed to the roof slab and walls by means of cleats, dashfastners etc, The rates shall includes the provision of additional/overlapping of frame work in case of level difference i.e, for cob-design etc, where ever necersary, for the trap-door, cutouts for electrical fixtures, A.C. duct, rounding of edges scrap foulding corner moulding etc....
-
-
-
... More
to be Continue........The exposed POP surface shall be smooth & levelled & painted with plastic paint with approved combination of colours/shade. The false ceiling shall be in completely levelled & rounding of edges in projected alignment. The rates shall also includes the all as specified above including scaffolding, work in arises round angles/edges narrow/wider returns, splayes moulding, cornices etc., for measurement nothing extra will be paid for level difference/girth etc., only straight measurement will be taken from outer edges of ceiling (wall to wall). Complete in all respect as per standard procedure & specification of as directed by the Engineer-in-charge.
81
-
-
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long,....
-
-
-
... More
to be continue.....the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
-
-
-
... More
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks)
42
-
-
... More
Replacing Gypsum board in the existing false ceiling as directed by the Engineer-in-Charge.
6
-
-
... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
132
-
-
... More
Providing and applying white cement based putty of avrage thickess 1mm of approved brand and manufacture , over the plastered wall surface even and smooth complete
292
-
-
... More
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
600
-
-
... More
Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required shade and colour complete. as per manufacturer's specification: up to 10 mtr hight
-
-
-
... More
Two or more coats on old work/ new work
460
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
-
-
-
... More
Two or more coats on new work
350
-
-
... More
Providing and fixing stainless steel ( Grade 304) railing, gates etc made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
100
-
-
... More
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
-
-
-
... More
Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm upto 2.50 sqm).
12
-
-
... More
Providing and fixing Powder Coated Aluminium work for doors, windows, ventilators and partitions with extructed built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285,fixed with rawl plugs and screws or with fixing clips or with expansions hold fasteners including necessary filling up of gaps junctions at top bottom and sides with required PVC/nepprene felt etc. Aluminium sections shall be smooth rust free striaght mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panalling, C.P brass/stainless steel screws all complete as per architectural drawings and the directions of Engineer in charge. (Glazing and panelling to be paid for seperately)
-
-
-
... More
For shutters of doors,windows& ventiliatiors including providing and fixing hinges/friction stay for aluminium window and making provision for fixing of fittings wherever required including the cost of PVC/neoprene gasket required (Fittings shall be paid for seperately). Powder coated aluminium (minimum thickness of powder coating 50 micron).
99
-
-
... More
For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron.)
17
-
-
... More
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
36
-
-
... More
Providing and fixing Aluminium Composite Panel (ACP) 4mm thickness with screw etc, in door, windows etc complete in all respect as directed by Engineer-in-charge.
2
-
-
... More
Providing and fixing glazing in aluminium door,window,ventilator and shutters and partitions etc. with PVC/neroprence gasket etc. complete as per the architectural drawings and the directions of Engineer in Charge. (Cost of aluminium snap beading shall be paid in basic item)With Float glass panes of 5.00 mm thickness.
10
-
-
... More
Providing fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge.
-
-
-
... More
Powder coated minimum thickness 50 micron aluminium
2
-
-
... More
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
1
-
-
... More
Providing and fixing Powder coated aluminium handle Parrot types to required colour or shade with necessary screws etc. complete.
10
-
-
... More
Providing & Fixing horizontal Zebra fabraic blinds of approved quality, colour & shades including rod, chain, pulley, brackets, screws etc, complete as directed by the engineer-in-charge.
10
-
-
... More
Providing and fixing soil , waste and vent pipes/rain water pipe using ISI marked P.V.C pipes (mini.6 kgf/sq.cm.) by using P.V.C. solvent of Pidilite or Prakash or equivalent make i/c fittings e.g.socket, bend, Tee (with or without access door as per requirement) etc. Before joining the pipes, the ends should be properly cleaned and roughend. Complete in all respect as per standard procedure and as directed by the Engineer- in- charge.
-
-
-
... More
110mm dia.
61
-
-
... More
75mm dia.
10
-
-
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge
2
-
-
... More
Providing and fixing ISI marked P.V.C.full socket Floor/Nahani Trap in position. Complete as per standard specification and as directed by the Engineer-in- charge. 75 mm diameter
3
-
-
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
-
-
-
... More
100x100 mm size P type
5
-
-
... More
Providing and fixing C.P liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
2
-
-
... More
Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws & washers complete.
2
-
-
... More
Providing and fixing Counter top type white Vitreous china wash basin of (550x400mm) of approved colour and shade with central 15mm C.P.brass pillar tap Parko or equivalent make ,32 mm C.P. brass waste of standard pattern, including C.P.brass trap, union,brackets to support at bottom or by other means etc wherever required.Complete in all respect as directed by the Engineer-in-Charge.
2
-
-
... More
Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.
4
-
-
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
1
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. 20 mm Nominal outer dia. pipe.
-
-
-
... More
Concealed Work
6
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
External work 25 mm nominal outer dia Pipes
3
-
-
... More
Making connection of G.I. /CPVC distribution branch with G.I. main of following sizes by providing and fixing tee, Union including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore
1
-
-
... More
Providing and fixing C.P. brass long body bib cock of (Chilli or Parko Make) approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
1
-
-
... More
Providing and fixing C.P. brass angle valve chilli/bath/parko make for cistern, water jet, basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore
-
-
-
... More
Two way angle valve
2
-
-
... More
Single way angle valve
6
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B
50
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
120
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
80
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire
50
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
160
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 4 sq. mm + 2 X 4 sq. mm earth wire
80
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 16 sq. mm + 2 X 6 sq. mm earth wire
80
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required
12
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required
12
-
-
... More
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required
6
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
100
-
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm)
8
-
-
... More
Supply and fixing of recess mounted 6 watt LED down Light, ideal for false ceiling with all accessories e.g. fixing clamps, suitable Installation frame, including connections, cutting of holes in the false ceiling/wooden panel all complete. (EDGEPRORDDLR6WLED840S of havells or euivalent)
50
-
-
... More
Supply, installation, testing and commissioning of 24 Watt LED cove light of 5 meter strip with driver complete etc as required Make: FLEXISTRIP5MTRIP2055WLED830S of Havells/Crompton/Philips/Wipro Garnet or equivalent
30
-
-
... More
Supply and fixing of Round/Square recess mounted 15 W, LED Slim Downlight fittings (suitable for POP/Gypsum false ceiling) with die- cast Aluminium housing finished in Premium white powder coating, Model -EDGEPROSQDLR15WLED840S of Havells /Havells/Philips/Wipro or equivalent with all accessories e.g. fixing clamps, installation frame , including cutting of holes in the false ceiling all complete.
30
-
-
... More
Supplying and fixing of 6 way ETPN (IP43 protection)Metal door MCB distribution board (make : Legrand/L& T or equivalent) providing with suitable cable end box with provision for phase bus-bars, nutral bars with shrouds, earth bar, sticking saddles, cement spill protector, colour coded interconnecting wire set, cable ties and circuit identification lables with provision of 4 pole MCB as incomer and SP MCBs as outgoings including painting,earthing, connection, testing, commissioning etc as required. Incomer - 63 Amps, FP MCB, C- curve, (Icu-10kA) - 1No. Outgoing - 10-32 Amp DP MCB(10kA), C- Curve - 18 Nos. Legrand/ L & T or equivalent.
2
-
-
... More
Supply and fixing of 400 mm sweep, 230 Volt, white plastic body & blades wall mounted fan with pull cords for speed regulator connection, testing and commissioning etc. as required. (Wall 44 Trendz ( Electric Blue ) of Orient/ CG or equivalent.)
10
-
-
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
30
-
-
... More
Supplying and fixing following modular switch/ socket on the existing switch box/ cover including connections etc. as required. TV antenna socket outlet
1
-
-
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
-
-
-
... More
1 run of cable
60
-
-
... More
2 run of cable
20
-
-
... More
Supplying and fixing RJ 45 Computer (LAN)modular socket on the existing modular plate & switch box including connections etc. as required
2
-
-
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 pair
100
-
-
... More
Supplying and fixing telephone socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
2
-
-
... More
Supplying and fixing double USB Charger 2M 2400 mA modular socket on the existing modular plate & switch box including connections etc. as required. Model 5734 22 of Lergrand
2
-
-
... More
Supply of 1.1 KV grade, XLPE/ PVC insulated, PVC seathed, Aluminium conductor armoured power cables conforming to IS 7098 ( Part - 1) / IS 1554 ( Part - 1) and ISI marked of size 3.5CX240 sqmm. Make-Havells/Polycab/Gloster .
70
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 240 sq. mm (62mm)
2
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Above 185 sq. mm and upto 400 sq. mm
20
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Above 185 sq. mm and upto 400 sq. mm
30
-
-
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)
20
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements