Central Road Research Institute Tender

If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.

Central Road Research Institute - CRRI Tender

Works

Civil Works Buildings

Coronavirus COVID 19

Eprocure

South East Delhi, Delhi

Opening Date18 Dec 2019

Closing Date27 Dec 2019

Tender Amount₹ 3,11,15,412

Notes

Download

Costs

EMD
₹ 6,22,310
Document Cost
₹ 1,500
Tender Fee
Refer Documents

Description

Unlock the Tender details for free

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Tender Id
2019_CSIR_35866_2
Bid Award Id
View
Tender No
MBSQ/MTCE/Reno-MS/Ph-I/2019-20
Tender Authority
Central Road Research Institute View
Purchaser Address
-
Website
http://https://www.csir.res.in/

Unlock the Tender details for free

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

Request Call Back

Documents

Download All

Tender Notice-1268.5 kBTendernotice_1.pdf

BOQ-1576.0 kBBOQ_41206.xls

Structural Repairs and Renovation/Rehabilitation of the Existing Twelve Storied Multi-storey Building at CRRI Staff Colony, Maharani Bagh, New Delhi-110065

Document-1690.4 kBTENDERDOCUMENT.pdf

Structural Repairs and Renovation/Rehabilitation of the Existing Twelve Storied Multi-storey Building at CRRI Staff Colony, Maharani Bagh, New Delhi-110065

Report Missing Document

BOQ Items

DO_NOT_SHOW

Quantity-

Rate-

Amount -

View all details for FREE

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Quantity68

Rate-

Amount -

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Quantity211

Rate-

Amount -

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres

Quantity11

Rate-

Amount -

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metres and below

Quantity55

Rate-

Amount -

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area beyond 3 sq. metres

Quantity5

Rate-

Amount -

Taking Out doors,windows and clerestory window, shutters(steel and wood ) including stacking with in 50 metre lead : of area below3 Sqm) and fixing Same after the repair work including cutting of Doors,if required with New Stainless Steel ISI butt hinges (100x60x2.5 mm) with necessary SS Screws as per direction of Engineer -in-Charge.

Quantity65

Rate-

Amount -

Making/Repair the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground: all complete as per direction of Engineer-in-Charge.For door/ window/ clerestory window

Quantity202

Rate-

Amount -

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Quantity12

Rate-

Amount -

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Quantity17

Rate-

Amount -

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Thickness above 10 mm up to 25 mm

Quantity67

Rate-

Amount -

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Quantity55

Rate-

Amount -

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Quantity1800

Rate-

Amount -

Dismentaling GI pipes (internal work) including dismentaling floors / walls after taking out the pipes, manually / by machenical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-Charge. Size of pipe 15mm to 50mm nominal bore.

Quantity486

Rate-

Amount -

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.

Quantity906

Rate-

Amount -

Demolishing mud phaska in terracing and disposal of material within 50 metres lead.

Quantity27

Rate-

Amount -

Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Quantity168

Rate-

Amount -

Supplying and filling in plinth with Jamuna sand under floors including, watering, ramming consolidating and dressing complete:

Quantity8

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil

Quantity45

Rate-

Amount -

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size

Quantity29

Rate-

Amount -

Extra for concrete work in superstructure above floor V level for each four floors or part thereof.

Quantity45

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Quantity48

Rate-

Amount -

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size

Quantity2

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform.

Quantity65

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Quantity25

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for :Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Quantity245

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick

Quantity152

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick

Quantity44

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for :Edges of slabs and breaks in floors and walls: Under 20 cm wide

Quantity65

Rate-

Amount -

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Quantity5000

Rate-

Amount -

Add for using extra cement in the items of design mix over and above the specified cement content therein. (Provisional Sum)

Quantity34

Rate-

Amount -

Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or part thereof.(Provisional Sum)

Quantity207

Rate-

Amount -

Providing and fixing tie bolt, spring coil and plastic cone in wall shuttering complete as per the direction of Engineer-in-charge: 12 mm dia. & 100 mm length.

Quantity25

Rate-

Amount -

Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured): Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)

Quantity3000

Rate-

Amount -

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using fly ash and cement content as per approved design mix, and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate / retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. NOTE- (1) Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. (2) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacement of OPC as per IS : 456. Uniform blending with cement to be ensured in accordance with clauses 5.2 and 5.2.1 of IS:456 -2000 in the items of BMC and RMC. All works above plinth level upto floor V leveL

Quantity19

Rate-

Amount -

Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable /recoverable separately: Providing M-35 grade concrete instead of M-25 grade BMC/ RMC. (Note : Cement content considered in M-35 is @ 350 kg/ cum)

Quantity19

Rate-

Amount -

Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing with cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits: 50 mm thick

Quantity63

Rate-

Amount -

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Quantity30

Rate-

Amount -

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)

Quantity243

Rate-

Amount -

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)

Quantity14

Rate-

Amount -

Extra for brick work / AAC block masonry / Tile brick masonry in superstructure above floor V level, for each four floors or part thereof by mechanical means

Quantity20

Rate-

Amount -

Extra for half brick masonry in superstructure, above floor V level for every four floors or part thereof by mechanical means

Quantity200

Rate-

Amount -

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry

Quantity220

Rate-

Amount -

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :300x10 mm

Quantity53

Rate-

Amount -

Quantity315

Rate-

Amount -

Providing and fixing ISI marked aluminium butt hinges ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 100x63x4 mm

Quantity697

Rate-

Amount -

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete 300x16 mm

Quantity31

Rate-

Amount -

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125 mm

Quantity306

Rate-

Amount -

Quantity98

Rate-

Amount -

Providing and fixing Cast Acrylic Sheet in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) : With Acrylic Sheet of 5.0 mm thickness

Quantity210

Rate-

Amount -

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. Complete

Quantity73

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately): Second class teak wood

Quantity1

Rate-

Amount -

Providing and fixing 25 mm thick shutters for cup board etc. : Glazed shutters : Second class teak wood including ISI marked anodized aluminium butt hinges with necessary screws

Quantity9

Rate-

Amount -

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws -

Quantity7

Rate-

Amount -

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Quantity7

Rate-

Amount -

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.-

Quantity66

Rate-

Amount -

Providing and fixing curtain rods of 1.25 mm thick powder coated Aluminium Rod, with two Enamel painted brackets & with wooden plugs/Fennel on sides of approved pattren & design as per requirement fixed with C.P. brass screws & fastners etc., complete : 25 mm dia.

Quantity157

Rate-

Amount -

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300x16 mm

Quantity5

Rate-

Amount -

Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 75x50x2.50 mm

Quantity104

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.: 15 mm nominal outer dia Pipes

Quantity550

Rate-

Amount -

Quantity55

Rate-

Amount -

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): 15 mm nominal bore

Quantity25

Rate-

Amount -

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: 15mm Dia Nominal Bore

Quantity22

Rate-

Amount -

Fixing C.P. brass bib cock of approved quality conforming to IS:8931: 15mm Dia Nominal Bore (The Bib Cock will be supplied by the Department)-

Quantity27

Rate-

Amount -

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms: 15 mm nominal bore

Quantity25

Rate-

Amount -

Fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms: 15 mm nominal bore (C.P. brass long body Bib Cock will be supplied by the Department)

Quantity20

Rate-

Amount -

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931: 15mm nominal Bore

Quantity32

Rate-

Amount -

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore

Quantity42

Rate-

Amount -

Fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore ( C.P. brass angle valve will be Supplied by the Department)

Quantity27

Rate-

Amount -

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter

Quantity8

Rate-

Amount -

Fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter (C.P. Brass Shower Rose will be supplied by the Department)

Quantity7

Rate-

Amount -

Providing & Fixing Water jet of approved make, quality & brand as desired by Engineer-in-chrge

Quantity8

Rate-

Amount -

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length: 15 mm nominal bore

Quantity42

Rate-

Amount -

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Quantity181

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge: External work :100 mm nominal inner dia Pipes

Quantity55

Rate-

Amount -

Quantity7

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge: Internal work - Exposed on wall : 20 mm nominal outer dia Pipes

Quantity865

Rate-

Amount -

Quantity267

Rate-

Amount -

Fixing water meter and stop cock in GI pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).

Quantity12

Rate-

Amount -

Providing and fixing brass stop cock of approved quality : 20 mm nominal bore

Quantity12

Rate-

Amount -

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore

Quantity5

Rate-

Amount -

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball: 50 mm nominal bore, 242mm long, weighing not less than 1240 gms

Quantity2

Rate-

Amount -

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 50 mm nominal bore: Vertical

Quantity2

Rate-

Amount -

Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work : 50 mm diameter pipe

Quantity7

Rate-

Amount -

Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work : 100 mm diameter pipe

Quantity27

Rate-

Amount -

Quantity7

Rate-

Amount -

Quantity1

Rate-

Amount -

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (Material/ Fittings such as white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling will be supplied by the Department).

Quantity5

Rate-

Amount -

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (Material Such as water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) will be supplied by the Department)

Quantity5

Rate-

Amount -

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board: 510x1040 mm bowl depth 250mm

Quantity7

Rate-

Amount -

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Quantity8

Rate-

Amount -

Quantity7

Rate-

Amount -

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Quantity8

Rate-

Amount -

Providing and fixing toilet paper holder : C.P. brass

Quantity8

Rate-

Amount -

Fixing of toilet paper holder : C.P. brass (Toilet Paper Holder will be Supplied by the Department) -

Quantity7

Rate-

Amount -

Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in SCI/C.I. Pipes: 100mm Dia Pipe -

Quantity13

Rate-

Amount -

Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in SCI/ C.I. Pipes: 90mm Dia Pipe -

Quantity40

Rate-

Amount -

Providing and fixing PTMT Bottle Trap for Wash basin and sink: Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms.

Quantity8

Rate-

Amount -

Fixing PTMT Bottle Trap for Wash basin and sink as per directrion of Engineer-in-Charge (Bottle Trap Will be Supplied by the Department)

Quantity7

Rate-

Amount -

Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. weighing not less than 105 gms.

Quantity8

Rate-

Amount -

Fixing PTMT liquid soap container / dispence as per the direction of Engineer-in-Charge (Soap Dispenser Will be Supplied by the Department) -

Quantity7

Rate-

Amount -

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms.

Quantity8

Rate-

Amount -

Fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement as per the direction of Engineer-in-Charge (Towel rail complete with brackets will be supplied by the Department) -

Quantity7

Rate-

Amount -

Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay (non-modular) F.P.S. bricks -

Quantity100

Rate-

Amount -

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Quantity32

Rate-

Amount -

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

Quantity8

Rate-

Amount -

Providing & Fixing Rectangular shape 600x450 mm precast R.C.C. manhole cover with frame -L.D. -25

Quantity136

Rate-

Amount -

Providing, Jointing and fixing UPVC Soil, Waste and Vent Pipes & Fittings - moulded as well as fabricated (Type B conforming to IS13592), including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Solvent cement joints may be provided for fittings and specials which are not manufactured with pushfit rubber joints. Note: All vertical and suspended horizontal pipework shall be fixed on MS brackets and hangers with U-clamps made from 10 mm dia galvanised steel rod complete with nuts and washers. Cost for MS structural work for supports shall be paid Extra. Single socketed Pipes: 110 mm Dia

Quantity178

Rate-

Amount -

Quantity514

Rate-

Amount -

Quantity20

Rate-

Amount -

Quantity64

Rate-

Amount -

Quantity23

Rate-

Amount -

Quantity7

Rate-

Amount -

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 90 mm outlet: uPVC

Quantity44

Rate-

Amount -

Providing and fixing multitrap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 90 mm outlet: uPVC

Quantity16

Rate-

Amount -

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC SWR pipes by means of MS Angles welded back to back, screwed with fastners (Carben Steel galvanised dash fastner (min 5 micron) of 10 mm dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm dia polyamide PA 6 grade sleave - Size 10mm x 60mm) and Nuts & Bolts of required length (30 Cm. Back to Back) including cutting brick work: For 110 mm SWR Pipes

Quantity178

Rate-

Amount -

Quantity514

Rate-

Amount -

Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete.

Quantity7

Rate-

Amount -

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels: Granite of any colour and shade:Granite of any colour and shade: Area above 0.5sqm

Quantity15

Rate-

Amount -

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels: Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble Area of slab over 0.50 sqm

Quantity322

Rate-

Amount -

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge: Granite work

Quantity30

Rate-

Amount -

Quantity457

Rate-

Amount -

Marble work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work) in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately): Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble: Area of slab over 0.50 sqm.

Quantity125

Rate-

Amount -

Providing and fixing cramps of required size & shape in RCC/ CC/ Brick Masonary backing with cement mortar 1:2 ( 1 cement :2 coarse sand) including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately): Stainless steel cramps.

Quantity55

Rate-

Amount -

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required: In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (Provisional Sum)

Quantity1060

Rate-

Amount -

Fabricating, providing & fixing Steel Almirah/Show Case as per approved design & required Size as per site with 18 gauge MS Sheet door & & 22 gausge MS sheet for rest of body with spray enamel paint with all fittings & fixtures (ISI Make) all complete as per requirement. all complete of approved make with back side painted with black anti-corrosive paint, measurement will be taken from front side almirah including border.

Quantity50

Rate-

Amount -

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete: Hot finished welded type tubes

Quantity275

Rate-

Amount -

Supply & Fixing of 3mm thick Compact Clear Polycarbonate Profile Sheet with Slotted notes and washer connected nut and bolts arrangements, self tapping screws etc.with selent all complete

Quantity41

Rate-

Amount -

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain Polycarbonate Sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete: 3mm thick Compact Clear Polycarbonate Profile Sheet

Quantity41

Rate-

Amount -

Welding by gas or electric plant including transportation of plant at site etc. complete

Quantity43750

Rate-

Amount -

Welding charges of shear key to existing reinforcement

Quantity1950

Rate-

Amount -

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Quantity725

Rate-

Amount -

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours, shades/colur on 20mm thick bed of Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

Quantity275

Rate-

Amount -

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Quantity452

Rate-

Amount -

Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm.

Quantity727

Rate-

Amount -

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.

Quantity907

Rate-

Amount -

Providing & Fixing Matt Finished, full body Vitrified (Un ractified) tile 200x200 (thikness to be specified by the manufacturer) of make of approved make in/arround open area of stilt of building in the colour/shade and texture laid in ornamental, multicoloured, intricate design/pattent as approved by engineer incharge, laid with average 3mm thick groove all round tile (between two tiles) using spacer strips up to 10mm depth, grooves filled with using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg) of approved colour/texture mixed and prepared as per manufacturer instructions laid over cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 , using 5kg. adhesive per sqm of tile area, in average 3mm thickness.

Quantity480

Rate-

Amount -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium ctions shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

Quantity2145

Rate-

Amount -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

Quantity2603

Rate-

Amount -

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge: Pre-laminated particle board with decorative lamination on both sides.

Quantity32

Rate-

Amount -

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width

Quantity1017

Rate-

Amount -

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).

Quantity703

Rate-

Amount -

Providing and fixing fly proof stainless steel grade 304 wire gauge, to aluminium windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. (The Cost of Aluminium Bidding Will be paid in Aluminium Works)

Quantity158

Rate-

Amount -

12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand)

Quantity1925

Rate-

Amount -

White washing with lime to give an even shade : Old work (One or more coats) - Sum Provisional

Quantity1120

Rate-

Amount -

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete.

Quantity2005

Rate-

Amount -

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and m anufacture, including applying additional coats wherever required, to achieve even shade and colour: Two coats

Quantity1167

Rate-

Amount -

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content: With water thinnable cement primer on wall surface having VOC content less than 50 grams/litr

Quantity5130

Rate-

Amount -

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats

Quantity252

Rate-

Amount -

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

Quantity1260

Rate-

Amount -

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm

Quantity250

Rate-

Amount -

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Quantity1362

Rate-

Amount -

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface

Quantity4635

Rate-

Amount -

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity4330

Rate-

Amount -

Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Quantity450

Rate-

Amount -

6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)

Quantity193

Rate-

Amount -

15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand)

Quantity292

Rate-

Amount -

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.

Quantity107

Rate-

Amount -

Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)

Quantity292

Rate-

Amount -

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Quantity400

Rate-

Amount -

12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.

Quantity400

Rate-

Amount -

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Quantity168

Rate-

Amount -

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Quantity500

Rate-

Amount -

Buy back of various dismantled material, released during the renovation work of flat, which deemed to be unserviceable by the Engineer-in-charge such as: Wooden Scrap includes wooden door with Frame Etc. (0.75x2.1 Sqm - Approx.)

Quantity38

Rate-

Amount -

Buy back of various dismantled material, released during the renovation work of flat, which deemed to be unserviceable by the Engineer-in-charge such as: Wooden Cabinet Shutters with Frame

Quantity26

Rate-

Amount -

Buy back of various dismantled material, released during the renovation work of flat, which deemed to be unserviceable by the Engineer-in-charge such as: Wooden Scrap Containing Damaged Almirah/ Showcase

Quantity52

Rate-

Amount -

Buy back of various dismantled material, released during the renovation work of flat, which deemed to be unserviceable by the Engineer-in-charge such as: Iron/ Cast Iron Scrap Containing MS windows

Quantity1625

Rate-

Amount -

Buy back of various dismantled material, released during the renovation work of flat, which deemed to be unserviceable by the Engineer-in-charge such as: Plastic/ PVC Scrap

Quantity42

Rate-

Amount -

Chipping of unsound/ week concrete material from slabs, beams, columns etc.with manual chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brush etc. and disposal of debris of all lead and lifts all complete as per direction of Engineer-in-Charge: Thickness50mm Average

Quantity932

Rate-

Amount -

Quantity582

Rate-

Amount -

Quantity582

Rate-

Amount -

Cleaning the reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and throughly washing with water and allowing it to dry, all complete as per direction of Engineer-in-Charge: Bars upto 12mm Dia

Quantity3930

Rate-

Amount -

Quantity3500

Rate-

Amount -

Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge: Upto and including 12mm dia

Quantity3175

Rate-

Amount -

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect: Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make

Quantity2095

Rate-

Amount -

Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge: Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2): 12 mm average thickness

Quantity4005

Rate-

Amount -

Quantity45

Rate-

Amount -

Quantity45

Rate-

Amount -

Providing, mixing and applying SBR polymer (of approved make @minimum 2% by wt. of cement used) modified plain/reinforced cementconcrete for structural members having minimum characteristiccompressive strength [with ordinary portland cement, coarse sandand graded stone aggregate of 10mm maximum size in proportionas per design criteria] with specified average thickness. Note: Rates shall be for finished surface area of concrete and shall include the cost of labour, concrete and appropriate approved Super- Plasticiser for rendering concrete as flowable and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument): 50mm thick in Grade M 25 with cement content not less than 330 kg per cum

Quantity935

Rate-

Amount -

Providing, mixing and applying SBR polymer (of approved make @minimum 2% by wt. of cement used) modified plain/reinforced cementconcrete for structural members having minimum characteristiccompressive strength [with ordinary portland cement, coarse sandand graded stone aggregate of 10mm maximum size in proportionas per design criteria] with specified average thickness. Note: Rates shall be for finished surface area of concrete and shall include the cost of labour, concrete and appropriate approved Super- Plasticiser for rendering concrete as flowable and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument): 75mm thick in Grade M 25 with cement content not less than 330 kg per cum

Quantity935

Rate-

Amount -

Providing and laying SBR Polymer modified (of approved make @ minimum 2% by wt. of cement used) plain/reinforced concrete jacket for the structural members e.g. columns, pillars, piers, beams etc with concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness all-round existing core of RCC member. Note: Rates shall be for finished surface area of concrete and shall include the cost of making holes in existing RCC slab, if required, for pouring concrete in shuttering mould of jacket and appropriate approved Super-Plasticiser for rendering concrete as flowable self compacting and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument): 50mm thick in Grade M 25 with cement content not less than 330 kg per cum

Quantity22

Rate-

Amount -

Providing and laying SBR Polymer modified (of approved make @ minimum 2% by wt. of cement used) plain/reinforced concrete jacket for the structural members e.g. columns, pillars, piers, beams etc with concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness all-round existing core of RCC member. Note: Rates shall be for finished surface area of concrete and shall include the cost of making holes in existing RCC slab, if required, for pouring concrete in shuttering mould of jacket and appropriate approved Super-Plasticiser for rendering concrete as flowable self compacting and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument): 75mm thick in Grade M 25 with cement content not less than 330 kg per cum

Quantity22

Rate-

Amount -

Providing and laying SBR Polymer modified (of approved make @ minimum 2% by wt. of cement used) plain/reinforced concrete jacket for the structural members e.g. columns, pillars, piers, beams etc with concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness all-round existing core of RCC member. Note: Rates shall be for finished surface area of concrete and shall include the cost of making holes in existing RCC slab, if required, for pouring concrete in shuttering mould of jacket and appropriate approved Super-Plasticiser for rendering concrete as flowable self compacting and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument):100mm thick in Grade M 25 with cement content not less than 330 kg per cum

Quantity45

Rate-

Amount -

Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. ((The payment shall be made on the basis of actual weight of approved grout injected.): Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete/RCC work.

Quantity1110

Rate-

Amount -

Providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diametre (20mm to 30mm) up to depth from 30mm to 80mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of Engineer-In-Charge.

Quantity680

Rate-

Amount -

Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of "L" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge.

Quantity1077

Rate-

Amount -

Providing, erecting, maintaining and removing temporary protective screens made out of specified fabric with all necessary fixing arrangement to ensure that it remains in position for the work duration as required by the Engineerin-charge: Wooven PVC cloth

Quantity2750

Rate-

Amount -

Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineer- in-Charge. Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument: 25mm thick in Grade M 25 with cement content not less than 330 kg per cum

Quantity250

Rate-

Amount -

Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineer- in-Charge. Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument: 50mm thick in Grade M 25 with cement content not less than 330 kg per cum

Quantity470

Rate-

Amount -

Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineer- in-Charge. Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument: 75mm thick in Grade M 25 with cement content not less than 330 kg per cum

Quantity250

Rate-

Amount -

Providing and fixing double scaffolding system (cup lock type) on the exterior side above seven story height & part thereoff, made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

Quantity805

Rate-

Amount -

Providing and fixing Tripple scaffolding system (cup lock type) on the exterior side, above seven story height & part thereoff, made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done: Above 7 storey Height & part thereoff

Quantity1075

Rate-

Amount -

Providing and fixing Four scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

Quantity1900

Rate-

Amount -

Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge.

Quantity145

Rate-

Amount -

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mmshall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing: 30 mm thick pre laminated PVC door shutter

Quantity45

Rate-

Amount -

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete.

Quantity15

Rate-

Amount -

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hingeswith necessary screws

Quantity25

Rate-

Amount -

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Quantity25

Rate-

Amount -

Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos vertically and 1 nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings . The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746, duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight. Note - Only plan area of chajjas shall be measured for making payment

Quantity217

Rate-

Amount -

Providing, erecting, maintaining and removing temporary protective barricading/screen of height as desired by Engineer-in charge, made out of minimum 49.5X49.5X3.6MM square Pipe attached to MS base plate of 150x150x10mm to ground firmly at a spacing of 2.4 mtr c/c with minimum 24 guage thick G.I. corrugated sheet fixed on one side for work duration as required by Engineer-in-charge (buy Back of Scrap Value of MS Tube & GI Sheet & MS Plate will be Deducted in Respective Item)

Quantity639

Rate-

Amount -

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required: 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Quantity565

Rate-

Amount -

Quantity100

Rate-

Amount -

Quantity630

Rate-

Amount -

Quantity100

Rate-

Amount -

Quantity450

Rate-

Amount -

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required: 2 x 1.5 sq. mm

Quantity100

Rate-

Amount -

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required: 3 x 1.5 sqmm

Quantity70

Rate-

Amount -

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required: 3 x 2.5 sq. mm

Quantity150

Rate-

Amount -

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required: 3 x 4 sq. mm

Quantity350

Rate-

Amount -

Supplying & fixing of following way, single pole and neutral, sheet steel MCB distribution board, 240 volts on surface / recess, complete with tinned copper busbar, neutral link, din bar, detachable gland plate, interconnections, phosphatized and power painted including earthing etc. as required. ( but without MCB/RCCB/Isolator):12 way double door

Quantity7

Rate-

Amount -

Quantity2

Rate-

Amount -

Supplying and fixing 63 amp., 240V DP MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Quantity12

Rate-

Amount -

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required: Single Pole

Quantity102

Rate-

Amount -

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group-B

Quantity285

Rate-

Amount -

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. Group -B

Quantity24

Rate-

Amount -

Wiring for Twin control light point with 1.5 sq.mm PVC insulated copper conductor cable in surface / recessed PVC conduit with 2 way piano type switch piano type switch, phenolic limited sheet, suitable size M.S.box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc. as required .

Quantity14

Rate-

Amount -

Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required.

Quantity19

Rate-

Amount -

Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required.

Quantity90

Rate-

Amount -

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.

Quantity80

Rate-

Amount -

Supplying and fixing call bell / buzzer and single phase, 230 volts, complete as required

Quantity10

Rate-

Amount -

Supplying and fixing stepped type electronic fan regulator on the existing plate switch box including connections but excluding plate etc. as required.

Quantity47

Rate-

Amount -

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Quantity70

Rate-

Amount -

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.

Quantity94

Rate-

Amount -

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Quantity75

Rate-

Amount -

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Quantity97

Rate-

Amount -

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required:25mm

Quantity245

Rate-

Amount -

Quantity100

Rate-

Amount -

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required:100 mm X 100 mm X 60 mm deep

Quantity35

Rate-

Amount -

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Quantity26

Rate-

Amount -

Supplying and drawing following pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair ( Two Pair)

Quantity640

Rate-

Amount -

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Quantity400

Rate-

Amount -

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Quantity4

Rate-

Amount -

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Quantity20

Rate-

Amount -

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Quantity60

Rate-

Amount -

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required:5 amp switch

Quantity59

Rate-

Amount -

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required: 2 way 5/6 amp switch

Quantity24

Rate-

Amount -

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required: 15/16 Amps switch

Quantity20

Rate-

Amount -

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required:3 pin 5/6 amp socket outlet

Quantity24

Rate-

Amount -

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required:6 pin 15/16 Amp socket outlet

Quantity20

Rate-

Amount -

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required:Telepone socket outlet

Quantity35

Rate-

Amount -

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required:TV antenna socket outlet

Quantity35

Rate-

Amount -

Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)

Quantity70

Rate-

Amount -

Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)

Quantity20

Rate-

Amount -

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 35 sq. mm and upto 95 sq. mm

Quantity100

Rate-

Amount -

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Quantity60

Rate-

Amount -

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Above 35 sq. mm and upto 95 sq. mm

Quantity50

Rate-

Amount -

Supplying of Surface wall Mounting 12 W LED Panel Light , Make : Philips /BAJAJ

Quantity29

Rate-

Amount -

Supplying of Tube Light-style LED Wall Light ( 4 feet ) set complete including tube, Make : Philips Tube Light-style LED Wall Light

Quantity34

Rate-

Amount -

Dismantling of existing electrical wiring, points & fittings etc.

Quantity290

Rate-

Amount -

Supplying of Tube Light-style LED Wall Light set (2 feet ) complete including tube, Make : Philips /Bajaj Tube Light-style LED Wall Light

Quantity22

Rate-

Amount -

Supplying of 2 core 1.5 sqmm flexible wire PVC insulated and round sheated wire copper conductor complete as required.

Quantity110

Rate-

Amount -

Supplying of 48” Ceiling fan, white color complete set with all accessories as required (The basic rate of ceilling fan will be Rs. 1439/- per numbers inclusive of all taxes. The variation of basic price will be adjusted as per sample approved by Department.)

Quantity70

Rate-

Amount -

Supplying of 8” sweep, 230 V exhaust fan / fresh air fan complete in all respect as required for installation (The basic rate of exhaust fan will be Rs. 1335/- per numbers inclusive of all taxes. The variation of basic price will be adjusted as per sample approved by Department.)

Quantity15

Rate-

Amount -

Supplying at site of 1100V grade, PVC sheathed PVC insulated armoured copper conductor LT cable of the following sizes Make : Gloster, Grandly, Havells, polycab 4 x 16 Sqmm

Quantity60

Rate-

Amount -

Supplying at site of PVC sheathed / XLPE alumimum conductor armoured cable of 1.1 kv grade complete as required:4 x 70 sqmm

Quantity75

Rate-

Amount -

Supplying at site of PVC sheathed / XLPE alumimum conductor armoured cable of 1.1 kv grade complete as required:4 x 95 sqmm

Quantity100

Rate-

Amount -

MAIN LT (FIRST ROOM PANEL) Suppliying , installation, testing and commisioning of panel of size ( H-2100 MMX L-2100 MM X D 350 MM ) Power coated, 2 MM CRCA sheet in, double door with IP44, and front Siemens gray color including power wiring , thimling , adjusting , fiting, spriral cable Tie, Terminal Chanel, terminals, PVC duct, cutting, nut bolt busbar and Bus bar Fitting support labour, and margin , Engineering Charge , and following: A) Two (2)no 320 amps 3 pole MCCB 36 ka ( Ics= Icu ) with adjustable thermal magnatic release having overcurrent and short circuit protectoin protection for M.S building B)METERING a) Multifuction meter EM 6436 with 6 AMP MCB, LED Type Light, C.T. Etc. b) Two ( 2 )no 200 amps 3 pole MCCB 36 ka ( Ics= Icu ) with adjustable thermal magnatic release having overcurrent and short circuit protectoin protection for compus 2 and for outgoing second switch room panel c) One ( 1 ) no 150 amps 3 pole MCCB 36 ka ( Ics= Icu ) with adjustable thermal magnatic release having overcurrent and short circuit protectoin protection for 51KVAR penel d) TWO ( 02 ) no 100 amps 3 pole MCCB 36 ka ( Ics= Icu ) with adjustable thermal magnatic release having overcurrent and short circuit protectoin protection for Enquiry office & over head pump e) One ( 1 )no 125 amps 3 pole MCCB 36 ka ( Ics= Icu ) with adjustable thermal magnatic release having overcurrent and short circuit protectoin protection for M.S BUILDING PUMP f) 63 amp 4 pole MCB 10 KA -04 Nos. C) 51 KVR CAPACITOR BANKS 1) 1 KVAR Capacitor Bank, a)MCB 10 Amp TP -01 No. , b)capacitor duty 9 Amp Contactor TP 1 KVAR with add on block -01 No. , c)Power capacitor 440 v 50 Hz 1KVAR 3 Phase-01 No. , d)Selector Swith Auto Manual -01 No. , e)Push button start, Stop, with NO, NC Elements -02 No. , f)LED Light On/ Off 240 V AC-02 Nos. , 2) 2.5 KVAR Capacitor Bank , a)MCB 10 Amp TP , b)Capacitor duty 9 Amp Contactor TP 2.5 KVAR with add on block, c)Power capacitor 440 v 50 Hz 2.5 KVAR 3 Phase , d)Selector Swith Auto Manual , e)Push button start, Stop with NO, NC Elements , f)LED Light On/ Off 240 V AC , 3) 5 KVAR Capacitor Bank a)MCB 16 Amp TP -01 No. , b)capacitor duty 12 Amp Contactor TP 5 KVAR with add on block -01 No. , c)Power capacitor 440 v 50 Hz 5 KVAR 3 Phase -01 No. , d)Selector Swith Auto Manual -01 No. , e)Push button start, Stop, with NO, NC Elements-02 Nos. , f)LED Light On/ Off 240 V AC-02 Nos. 4) 7.5 KVAR Capacitor Bank a)MCB 25 Amp TP -01 No. , b)capacitor duty 25 Amp Contactor TP 7.5 KVAR with add on block -01 No. c)Power capacitor 440 v 50 Hz 7.5 KVAR 3 Phase-01 No. , d)Selector Swith Auto Manual -01 No. e)Push button start, Stop, with NO, NC Elements-02 Nos. , f)LED Light On/ Off 240 V AC-02 Nos. 5) 15 KVAR Capacitor Bank a)MCB 32 Amp TP -01 No. , b)capacitor duty 32 Amp Contactor TP 15 KVAR with add on block -01 No. c)Power capacitor 440 v 50 Hz 15 KVAR 3 Phase-01 No. , d)Selector Swith Auto Manual -01 No. , e)Push button start, Stop, with NO, NC Elements-02 Nos. , f)LED Light On/ Off 240 V AC-02 Nos. 6) 20 KVAR Capacitor Bank a)MCB 63 Amp TP -01 No. , b)capacitor duty 63 Amp Contactor TP 15 KVAR with add on block -01 No. , c)Power capacitor 440 v 50 Hz 15 KVAR 3 Phase -01 No. , d)Selector Swith Auto Manual -01 No. , e)Push button start, Stop, with NO, NC Elements-02 Nos. , f)LED Light On/ Off 240 V AC-02 Nos.

Quantity1

Rate-

Amount -

SECOND ROOM PANEL Suppliying , installation, testing and commisioning of panel of size ( H-1625 MMX L-1100 MM X D 350 MM ),Power coated, 2 MM CRCA sheet in , double door with IP44, and front Siemens gray color or including power wiring , thimling , adjusting , fiting, spriral cable Tie, Terminal Chanel, terminals, PVC duct, cutting, nut bolt busbar and Bus bar Fitting support labour, and margin , Engineering Charge ,and following: A)One ( 1 )no 200 amps 3 pole MCCB 36 ka ( Ics= Icu ) with adjustable thermal magnatic release having overcurrent and short circuit protectoin protection for incoming Second Switch room panel B)METERING a)MCB 6 amp sp for control protection -03 Nos. b)Meter Amp Volt Frequency (VAF)-01 No. c)LED light Red , yellow , blue 240 VAC -03 Nos. d)current transformer 200/5 amp.-03 Nos. C)OUT GOING FEEDER a)Two ( 2 )no 100 amps 3 pole MCCB 36 ka ( Ics= Icu ) with adjustable thermal magnatic release having overcurrent and short circuit protectoin protection for Enquiry office -02 & STREET LIGHT b)63 amp 4 pole MCB 10 KA c)63 amp 3 pole MCB 10 KA

Quantity1

Rate-

Amount -

BSES MAIN INCOMING PANEL Suppliying , installation, testing and commisioning of panel of size ( H-1275 MMX L-1100 MM X D 350 MM ),Power coated, 2 MM CRCA sheet in tether finish, double door with IP44, and front Siemens gray color or including power wiring , thimling , adjusting , fiting, spriral cable Tie, Terminal Chanel, terminals, PVC duct, cutting, nut bolt busbar and Bus bar Fitting support labour, and margin , Engineering Charge ,and following: A)One ( 1 )no 400 amps 3 pole +NL MCCB 25 ka ( Ics= Icu ) with adjustable thermal magnatic release having overcurrent and short circuit protectoin protection B)Two ( 2 )nos. 250 amps 3 pole +NL MCCB 25 ka ( Ics= Icu ) with adjustable thermal magnatic release having overcurrent and short circuit protectoin protection for enquiry office panel.

Quantity1

Rate-

Amount -

Suppliying , installation, testing and commisioning of panel of size ( H-1850 MMX L-1700 MM X D 300 MM ),Power coated, 2 MM CRCA sheet in tether finish, double door with IP44, and front Siemens gray color or including power wiring , thimling , adjusting , fiting, spriral cable Tie, Terminal Chanel, terminals, PVC duct, cutting, nut bolt busbar and Bus bar Fitting support labour, and margin , Engineering Charge ,and following: a)MCB 63 Amp DP 10 KA -12 nos b)16 sqmm, Single core Red and black for connection as required

Quantity1

Rate-

Amount -

Dis-assemling and Re-assembing of Same Elevator controller and Machine (01 no.) complete in all respect as per the direction of Engineer -In- Charge at above at 12th floor in M.S. Building by OEM (M/s OTIS Elevator Pvt. Ltd.).

Quantity1

Rate-

Amount -

Buy back of scraps which are to be released from site, i.e. from CRRI Staff Colony, maharani bagh, taking it off premises only through gate pass issued from concerned department, which includes weighing,loading,transportation and unloading as per direction of engineer-in- charge: PVC insulated aluminium wire scrap

Quantity74

Rate-

Amount -

Quantity95

Rate-

Amount -

Quantity20

Rate-

Amount -

263 More

Evaluation Notes How It Works ?

Partners

Payment Type

Bank Certification Amount

Bank Guarantee Amount

Additional Info 1

Additional Info 2

Additional Info 3

Additional Info 4

Remarks

Potential Partner

Select Your Requirements

Help me get relevant partners for joint bidding

Help me get relevant material suppliers

Help me get project financing

Central Road Research Institute Tender

Central Road Research Institute - CRRI Tender

Costs

EMD

Document Cost

Tender Fee

Description

Contact

Tender Id

Bid Award Id

Tender No

Tender Authority

Purchaser Address

Website

BOQ Items

Potential Partner

TENDER BY COUNTRIES

United States Tenders|

United Kingdom Tenders|

Spain Tenders|

France Tenders|

Qatar Tenders|

Australia Tenders|

Canada Tenders|

China Tenders|

Malaysia Tenders|

Maldives Tenders|

Singapore Tenders|

Bangladesh Tenders|

Ethiopia Tenders|

Bhutan Tenders|

Kuwait Tenders|

Oman Tenders|

Germany Tenders|

Egypt Tenders|

Ghana Tenders|

Saudi Arabia Tenders

TENDER BY AUTHORITIES

Federal Road Agency Tenders|

Bangladesh Railway Tenders|

Area Metropolitana De Barcelona Tenders|

Jsc Russian Railways Tenders|

Kuwait Oil Company Tenders|

Civil Aviation Authority Tenders|

Food And Agriculture Org. Tenders|

Eskom Tenders|

Energy Regulation Commision Tenders|

Dept Of Defence Tenders

TENDER BY CATEGORIES

Agriculture Or Forestry Works Tenders|

Automobiles And Auto Parts Tenders|

Civil And Construction Tenders|

Consultancy Services Tenders|

Education And Training Services Tenders|

Electrical And Electronics Tenders|

Finance And Insurance Sectors Tenders|

Food Products Tenders|

Furnitures And Fixtures Tenders|

Healthcare And Medicine Tenders

TENDER BY PROCUREMENT

Goods Tenders|

Works Tenders|

Services Tenders

OFG MANUFACTURING BUSINESSES PRIVATE LIMITED

Head Office

Sales Office

COMPANY

About Us

Contact Us

Download Media Kit

POLICIES

Terms of Use

Privacy Policy

SUPPORT

Request Demo

MOBILE APPS