Central Road Research Institute Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Central Road Research Institute - CRRI Tender
Coronavirus COVID 19
Eprocure
Opening Date7 Nov 2019
Closing Date18 Nov 2019
Tender Amount₹ 94,28,459
Costs
EMD
₹ 1,88,600Document Cost
₹ 1,000Tender Fee
Refer Documents
Summary
Renovation Of Director Office , Directors Secretariat Along With Conference Room At Crri
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_CSIR_35288_1Bid Award Id
ViewTender No
QSP/ESS/DRRI-SECTT/Reno/2019Tender Authority
Central Road Research Institute ViewPurchaser Address
-Website
http://https://www.csir.res.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking/depositing within CRRI Campus or as directed by the Engineering in Charge. Of area beyond 3 sq. metres
8
-
-
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within C.R.R.I Campus as directed by Engineer-in-Charge : Of area 3 sq. metres and below : Of area 3 sq. metres and below
6
-
-
Removing dry or oil bound distemper, water proofing cement paint, polishing and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
149
-
-
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond CRRI campus, for all leads including all lifts involved. Complete as directed by the Engineer in Charge.
10
-
-
Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable materialin dumping ground as directed by the Engineering in Charge.. In cement mortar
24
-
-
Making opening in brick masonary including dismantling the floor by cutting masonary and making good the damage of walls, flooring jambs and walls complete to match existing surface i/c disposal of malba /rubbishunserviceable materialin dumping ground as directed by the Engineering in Charge For door/ windows/ clerestory windows
6
-
-
Dismantling wall panelling on walls and wooden partitions including supporting members and stacking within CRRI campus as directed by the Engineer-in-charge.Thickness up to 40mm size.
118
-
-
Dismantling of stone/tile work in floor and roofs laid in cement mortor including stacking material within CRRI campus as directed.for thickness of tiles 10mm to 30mm .
40
-
-
Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material within CRRI campus as directed by the Engineer-in-charge.
2
-
-
Dismantling wooden cupboards including supporting members and stacking within CRRI campus as directed by the Engineer-in-charge.
26
-
-
Dismantling of Carpet floor tiles along with U-foam including stacking/depositing of serviceable material within CRRI store and disposal of unserviceable material as directed by the Engineer-in charge.
145
-
-
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling with frame disposal of unserviceval material within CRRI campus.
40
-
-
Dismantling of washbasin/ W.C.'s & its fittings including stacking & depositing of useful material in the CRRI Main Store & disposal of unserviceable material within CRRI campus as directed.
5
-
-
Dismantling G.I. pipes (external / Internal work) including excavation, refilling trenches , cutting of the walls & making good the same.Finally taking out the pipes, manually/by mechanical means including stacking of pipes within CRRI Main Store as directed by the Engineer in Charge.15 mm to 40 mm nominal bore.
15
-
-
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead.
42
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within CRRI Campus All kind of soil.
11
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttring - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
2
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone
aggregate 20 mm nominal size)
1
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
16
-
-
Shifting the door frame top horizontal wooden member/bar upto 1 feet above so that the door height will be app.7.5 to 8 feet by cutting/unfold the existing member and joined new member to match with the existing one by a dado/square-grooved slot joint i.e. similar to tongue and groove joinery.Complete in all respect as directed by Engineer - in -charge. Use IInd.class sall wood .
0.05
-
-
Providing and fixing IInd class teak wood strip/batten app.25 mm wide x 12 mm thick in the cut portion of the double shutter frame from out side only i.e. the space left after removing the wire mesh door.Complete in all respect as directed by Engineer - in - charge
7
-
-
Providing & fixing panelled or panelled & glazed & shutters for doors, windows & clerestory windows, including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws, the shutter to be fixed in existing window frame excluding panelling which will be paid for separately, i/c cutting of existing wooden member of about 1.00 m in length & making good the cut surface. All complete as per direction of Engineer-in-charge: Kiln seasoned selected planks of sheesham wood: 30 mm thick shutters
6
-
-
Providing and fixing ISI marked 85X42 mm oxidised M.S. Pull bolt lock conforming to IS:7534 with mecessary screws bolts, nut and washers etc. Complete.
4
-
-
Steel work welded in built up sections / framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings frames guard bar,ladder railings brackets gates and similar works.
433
-
-
Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
1182
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
778
-
-
3 mm thick translucent white / coloured acrylic plastic sheet fixing in roof included cutting and fixing with top support of metal strip screw farstner etc complate in all respect as directed- by Engineer -in- charge
57
-
-
Fixing the flush door shutter 35 mm with SS screw hinges and the same with existing door complete in all respect as directed by Engineer In-charge.
2
-
-
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)
30
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood
0.2
-
-
Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.
14
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
30
-
-
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
30
-
-
Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick
49
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Edges of slabs and breaks in floors and walls Under 20 cm wide
5
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Shelves (Cast in situ)
2
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
2
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers
3
-
-
Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete
18
-
-
Centering and shuttering including strutting, propping etc. and removal of form for :Columns, Pillars, Piers, Abutments, Posts and Struts
55
-
-
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). Suspended floors, roofs, landing, beams and balconies(Plan area to be measured)
18
-
-
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
3
-
-
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)
4
-
-
Reinforced cement concrete work in beams, suspended floors , roofs having slope up to 15˚ landing, balconies, shelves, chajjas lintels, bands plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).
6
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more
1300
-
-
12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)
82
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand)
41
-
-
6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand)
105
-
-
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape,raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground as directed by the Engineering in Charge. with cement mortar 1:4(1 Cement :4 Coarse sand)
12
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
23
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias, Dado( i/c top recessed horizontal stone moulding, projected 20mm from dado stone face) and similar vertical locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour & shade.Any area of slab.
7
-
-
Providing & fixing in position Phenol bonded Bamboowood flooring with planks of sizes 14mm thick, 1800mm length (minimum) and
130 mm wide(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded polyethylene foam sheets having density 40kg/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and door reducer of size 1900mm x 44mm, wherever required. The bamboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge.
147
-
-
Providing and laying Vitrified tiles / Ceramic Premium quality double - charge mat / glossy finished in flooring , skirting etc. with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622 , of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Including the grouting to the joints with the white cement and maching pigments etc. Complete). Size of Tile any size
129
-
-
Providing & fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10mm thick, 1800mm length (minimum) and 130 mm wide (minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC)
issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over backlayment of 1.00 mm thick expanded polyethylene foam of density 40kg/cum in two layers, first layer on wall surface before fixing wooden frame and second layer on frame under cladding. The bamboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge.
190
-
-
12 mm commercial ply in the frame work with screws etc. Complete as directed by Engineer - in - charge.
73
-
-
Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved quality shade and manufacture
73
-
-
Providing and fixing skirting with Pre-laminated medium density fibre board exterior grade (Grade-I) conforming to IS: 14587:1998 marked, with (both side decorative and other side balancing lamination and edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand with necessary fixing arrangements and screws, including drilling
necessary holes for rawl plugs etc. all complete. 25 mm thick
6
-
-
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
58
-
-
Extra for providing openig of required size and shape for wash basins/kitchen sink in kitchen platform , vanity counters and similar location in marble/Granite/ stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete.
2
-
-
Providing Chequrred line (set of three lines with minimum 5mm gaps) cut by stone cutter straightly on the treads/going of Granite stone fixed in steps/stair cases complete in all respect as directed by the Engineer-in-Charge.For payment running length for the set of lines will be measured.
27
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,( for payment purpose only weight of stainless steel members shall be considered including all fixing accessories such as nuts, bolts, fasteners etc.) Complete including removing existing railing and wooden hand rail as directed.
104
-
-
Providing and Fixing 12 mm thick frameless toughened glass partition of approved brand and manufacture in the fixed position, including providing and fixing stainless steel (SS-304) all patch fittings, all complete as per direction of Engineer-in-charge.
45
-
-
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing stainless steel (SS-304) top & bottom pivot, all patch fittings, heavy duty floor spring hinge of approved quality for fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper to be paid separately).
4
-
-
P/F corner glass door lock patch with key cylinder of approved quality and manufacturer like Closma model no.CPF-150 or equivalent make.Complete as directed.
2
-
-
P/F glass door handle made out of 32mm dia.pipe duly finished SS-304, 450mm long and 300mm C/C hole size of approved quality & manufacturer like Closma Model no.CGH-602 or equivalent make.Complete as directed.
2
-
-
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild teel item galvanised @ 80 gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge. With 16 mm thick beveled tegular mineral fibre false
ceiling tile (NRC 0.55 to 0.6
73
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board
conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks)
172
-
-
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8
mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns
(minimum), including factory painted after bending.
18
-
-
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. i/c P/F 5mm thick IInd.class teak wood lipping 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
16
-
-
French Spirit Polishing.New Work (two or more coats) i/c a coat of wood filler.
50
-
-
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) :Rectangular or square.
11
-
-
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :250x10 mm
9
-
-
P/F sliding door bolt with inbuilt locking arrangement i/c nut bolts/screws etc.Complete as directed.200/300mm size.
8
-
-
Providing and fixing stainless steel (S.S.) hanging floor door stopper of approved quality and manufacturer with necessary screws etc. complete Twin rubber stopper
9
-
-
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
9
-
-
Providing and fixing Powder Coated Aluminium work for doors, windows, ventilators and partitions with extructed built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285,fixed with rawl plugs and screws or with fixing clips or with expansions hold fasteners including necessary filling up of gaps junctions at top bottom and sides with required PVC/nepprene felt etc. Aluminium sections shall be smooth rust free striaght mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panalling,C.P brass/stainless steel screws all complete as per architectural drawings and the directions of Engineer in charge.(Glazing and panelling to be paid for seperately)For shutters of doors,windows& ventiliatiors including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC/neoprene gasket required (Fittings shall be paid for seperately).Powder coated aluminium (minimum thickness of powder coating 50 micron).
197
-
-
For fixed portion.Powder coated aluminium (minimum thickness of powder coating 50 micron.)
778
-
-
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125 mm
18
-
-
Providing and fixing aluminium handles parrot type , ISI marked, powder coated required colour or shade, with necessary screws etc. complete :
36
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)
38
-
-
Providing and fixing glazing in aluminium wooden door, window, ventilator shutters and partitions etc. with beading nails etcetc. complete as per the architectural drawings and the directions of Engineer-in-charge .With float glass panes of 4.0 mm thickness
6
-
-
Providing & Fixing horizontal Zebra fabraic blinds of approved quality, colour & shades I/c rod, chain, pulley, brackets, screws etc.Complete as directed by the engineer-in-charge.
85
-
-
P/F Ice-cube or approved pattern or style glass film over the glass partition and doors of approved quality, pattern & design to the complete satisfaction of the Engineer-in-charge.
44
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
102
-
-
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm
102
-
-
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work
80
-
-
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work
150
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : Weather coat Make- Burger / Asian paint etc. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
105
-
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 470x420 mm bowl depth 178 mm
1
-
-
Providing and fixing Counter top type Vitreous china wash basin of Oval shape (550x480mm) Hindustan Parryware or equivalent make of approved colour/shade with dual function (i.e. Hot & Cold) central 15mm dia.C.P.brass pillar tap of Parko/Kohler make heavy duty,32 mm C.P. brass waste of standard pattern, including C.P.brass trap, union,brackets to support at bottom or by other means etc wherever required.Complete in all respect as directed by the Engineer-in-Charge.
2
-
-
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
2
-
-
Providing and fixing P.V.C. waste pipe for sink or basin including P.V.C. waste fittings complete. 32 mm dia or 40 mm dia
1
-
-
Providing and fixing C.P. brass angle valve Make: Kohler / Jaquar For basin mixer geyser and cistern of w.c. approved make conforming to IS : 8931.15 mm nominal bore.
18
-
-
P/F unplasticised PVC connection pipe with PTMT nuts collar and bush of approved quality and colour.15mm nominal bore with 45 cm. Length.
16
-
-
Providing and fixing brass bib cock Make: - Kohler/Jaquar of approved quality :15 mm nominal bore
3
-
-
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter Make : Kohler / Jaquar
1
-
-
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make: Kohler/Jaquar conforming to IS:8931. 15 mm nominal bore
2
-
-
Providing & Fixing PTMT Towel Rail with brackets fixed to wall with Pvc plugs, CP brass screws with concealed fitting arrangement of approved quality and colour. 600mm long towel rail with total length of 645mm, width 78mm and effective height 88mm, weighing not less than 190gms.
3
-
-
Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP swrews ,washers etc.complete, of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.
2
-
-
Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand Kohler / Jaquar make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.
2
-
-
Providing and fixing white vitreous china battery based infrared sensor operated urinal Make: Kohler/Jaquar of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
2
-
-
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto1 metre long with S.S. triangular plate to Eureopean type W.C. of
quality and make as approved by Engineer - in - charge
2
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal outer dia Pipes
30
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes
35
-
-
Providing and fixing G.I. pipes complete with G.I fittings and clamps, including cutting and making good the walls etc. Internal Work- Exposed on wall. 15 mm dia. Nominal bore
6
-
-
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 15mm nominal bore
5
-
-
P/F 75mm nominal bore PVC pipe 6 kg / sqr. Cm. approved quality (Prakash or equivalent make) on wall & floor with elbow, tee,bend, brackets,adhesives etc complete as directed by the Engineer-in-charge.75 mm diameter
50
-
-
Providing and fixing soil , waste and vent pipes/rain water pipe using ISI marked P.V.C pipes (mini.6 kgf/sq.cm.) by using P.V.C. solvent of Pidilite or equivalent make i/c fittings e.g.socket, bend, Tee (with or without access door as per requirement) etc. Before joining the pipes, the ends should be properly cleaned and roughend. Complete in all respect as per standard procedure and as directed by the Engineer- in- charge. 100mm dia
35
-
-
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides.For pipes 100 to 250 mm diameter
3
-
-
P/F PVC cowl in PVC vent pipes with adhesive etc. complete 100 mm size.
2
-
-
P/F PVC cowl in PVC vent pipes with adhesive etc. complete 75 mm size.
3
-
-
Providing and fixing ISI marked P.V.C.full socket Floor/Nahani Trap in position.Complete as per standard specification and as directed by the Engineer-in- charge.75 mm diameter
6
-
-
Providing and fixing trap of self cleansing design with screwed down or hinged Cocroach Trap grating (Chilly or equivalent Make) with or without vent arm complete, including cost of cutting and making good the walls and floors if required.100mm inlet & 75mm outlet.
6
-
-
Providing/Making/Fixing wooden almira / storage unit (app. 2.24 mtr. height & overhad wall storage unit of app. 0.60mtr. height) along with inside storage shelves consisting of the following items :- a) 25mm thick commercial block board (confirming to IS-specification) provided in the horizantal shelves, cupboard shutters i/c 25x5mm size 2nd class teak wood lipping (approved shape & design) edges duly finished with french spirit polishing .b) P/F 19 mm thick commercial block board in the frame of almira, back side etc. with 19x5mm thick 2nd.class teak wood margin on edges, duly polished. c) P/F Piano type hinges, magnetic catcher, hasp & staple for locking arrengement etc. for the following specification / materials. 18/ 19 mm thick commercial block board with 5mm thick second class teak wood lipping on all edges polishing, etc in the frame work as specified above and directed by engineer - in - charge
17
-
-
25mm thick commercial board with 25X5mm thick second class teak wood lipping on all edges, polishing, etc. as specified above.
6
-
-
Providing & fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality 1.0 mm thick.
33
-
-
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :100x70x4 mm (ordinary type)
24
-
-
Brass Handles 100mm of approved design shade and color with neccesory screw etc.
14
-
-
Painting with wood preservative / anti termite solution as per manufacturer specification on all wood work / boards
41
-
-
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type)
10
-
-
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :100x10 mm
10
-
-
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.75 mm
10
-
-
Providing and Fixing 1mm thick 3D washable wall paper of approved make & design complete as per direction of the Engineer In-charge.
31
-
-
Providing and fixing stainless steel (S.S. - 304) words of CSIR - CRRI of approved design & finsih. Complete in all respect as directed by the Engineer In-charge.
54
-
-
Providing and fixing stainless steel (S.S. - 304) logo pf CRRI of approved design & finsih. Complete in all respect as directed by the Engineer In-charge.
113.04
-
-
Providing and Fixing 6mm thick Deco board of SHERA make with Cassiano Profile on gypsum ceiling with screws etc. complete in all respect as directed by the Engineer In-charge.
6
-
-
Providing and Fixing 6mm thick wooden grained fibre cement board of approved make & design (wood finish) to be fixed on POP-Ceiling with screws / adhesives etc. i/c applying desired quality PU- Paint. Finish on the Board. Complete in all respect as per specification & as directed by the Engineer In-charge.
9
-
-
Providing and Fixing ECO Noise control for Sound deffusers / Sound scrapes blades curves (1200X400X40 mm) of Armstrong/ equivalent make in the POP-Ceiling with standard size hanging wire firmly fixed to ceiling by standard means. Complete as per specification & as directed by the Engineer In-charge.
4
-
-
Providing and Fixing 25mm thick fabric wrapped acoustic panel hexaginal shapes of approve make like Armstrong or equivalent framed hanging with standard wires with the POP-Ceiling. Complete in all restect as per standard specification & as directed by Engineer In-charge.
22
-
-
Providing and Fixing Artificial Vertical grass wall tiles of approved make & specified. Complete in all respect as per Specification & as directed by Engineer In-charge.
8
-
-
Furniture Items Supplying and placing Table of size 2350x1200mm of Aristo model, Godrej make or equivalent specification manufacturer like Heramn Miller/Steel Case/Vitra/Featherlite/Delite Hitech/Dellform. Company should green guard , bifma, sefa and AIOTA certified,for the follwing specifications. Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Gromet provided on work surface for wire management Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Handle is provided for ease of opening. Storage is provided with cam lock for security.Complete in all respect as per Godrej standard specification and as directed by the Engineer-in-charge.
1
-
-
Supplying and Placing BACK STORAGE UNIT of size 1800Wx1800H of Aristo table of Godrej make or equivalent specification manufacturer like Heramn Miller/Steel Case/Vitra/Featherlite/Delite Hitech/Dellform, having Top Panel-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Slide Door Unit-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom,back and shelves.Shutters are made of 25mm thick MDF one side pre-laminate board confirming toIS-14587:1998 with 0.4mm PVC membrane pressed on to top. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening.Storage is provided with lock for security.Display/Storage Unit-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for bodypanels like side,back and shelves. Doors are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Top panel of display unit Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Complete in all respect as per Godrej standard specification and as directed by the Engineer-in-charge.
1
-
-
Supplying and Placing Two Seater Sofa (PISA Model) of Godrej make or equivalent specification manufacturer like Heramn Miller/Steel Case/Vitra/Featherlite/Delite Hitech/Dellform. 1) The SEAT should be made of PU foam with Density 32 ± 2 kg/cu.mtr having an additional top layer of J PU foam with Density 28 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood OCP-QLTA-PL14-18 4. Dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose .It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate. SIZE : 146 cm (W), 92cm (D), 82cm(H), 45cm(SH).Complete in all respect as per Godrej make PISA model soffa specification and as directed by the Engineer-in-charge.
1
-
-
Supplying and Placing Glass Centre Table of Godrej make PISA CENTRE TABLE MODEL or equivalent specification manufacturer like Heramn Miller/Steel Case/Vitra/Featherlite/Delite Hitech/Dellform. It should be 12 ±0.3 mm thick black tinted Toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It should be a welded Assembly made in SS202 grade having Dia. 12±0.04 as per should be :1762. Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.Complete in all respect as per Godrej std. specification and as directed by the Engineer-in-charge.
1
-
-
Supplying and Placing Glass Side Table of Godrej make PISA SIDE TABLE MODEL or equivalent specification manufacturer like Heramn Miller/Steel Case/Vitra/Featherlite/Delite Hitech/ Dellform. It should be 12 ±0.3 mm thick black tinted Toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It should be a welded Assembly made in SS202 grade having Dia. 12±0.04 as per should be :1762. Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 cm.Complete in all respect as per Godrej std. specification and as directed by the Engineer-in-charge.
3
-
-
Supplying and Placing Very High Back Chair of Godrej make HALO VERY HIGH BACK CHAIR MODEL or equivalent specification manufacturer like Heramn Miller/Steel Case/Vitra/Featherlite/Delite Hitech/Dellform.Chair Seat/back assembly: the seat should be made up of 1.2 ± 0.1cm. thick hot pressed plywood and upholstered with leather and moulded polyurethane foam. the back foam should be designed with contoured lumber support for extra comfort. back size: 53.0cm.(w) x 95.4cm.(h) seat size:54.6cm.(w) x 49.0cm.(d) the hr polyurethane foam should be moulded with density = 45 +/-2 kg/m³ and hardness load 16 ± 2 kgf for 25% compression the seat and back should be arrested together with spine made of 0.8 ±0.05 cm thk hr steel and should be black powder-coated ( dft 40-60 microns ) armrest assy: the armrest assy. should comprise of three parts viz. the armrest support tube and p.u. armrest and the armrest top. the armrest tube assy. should be made of 2.54±0.03cm x 0.16±0.0128cm m.s. e.r.w. support tubes and chrome plated. the p.u. armrest should be made of black integral skin polyurethane with 50-70 shore 'a' hardness and reinforced with m.s. insert. the armrest top should be made of abs & upholstered with foam & leather the mechanism should be designed with the following features:•360° revolving type.•seat back tilting ratio of 1 : 1.5•front pivot for tilt with feet resting on ground ensuring more comfort.•tilt tension adjustment.•5-position locking with anti-shock back mechanism, which prevents the backrest from impacting the user when the lock should be released.•static seat depth adjustment = 5.0 ± 0.5cm with 5 position locking. it has an adjustment stroke of 9.0 ± 0.3cm the bellow should be 1 piece and blow moulded in black polypropylene the pedestal should be made of die-cast aluminium with buffing finish. it should be fitted with 5nos. twin wheel castor. the pedestal should be 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors) the twin wheel castors should be injection moulded in black nylon.Complete in all respect as per Godrej standard specification as dirceted by the Engineer-in-charge.
1
-
-
Supplying and Placing 3 Seater Soffa (PISA THREE SEATER MODEL) of Godrej make or equivalent specification manufacturer like Heramn Miller/Steel Case/Vitra/Featherlite/Delite Hitech/Dellform.Specification- Upperstructure shall be a single shell 1.2 ±0.1cm. thick hot pressed plywood. Dia 4mm zig-zag type assembly is mounted in the understructure for support and additional cushioning purpose. The seat is made up of PU foam with density 32+/-2 Kg/m3 having an additional top layer of PU foam with density 28+/-2 Kg/m3, upholstered with fabric or leatherette. The back is made up of 28+/-2 Kg/m3 with additional top layer of PU foam with density 23+/-2 Kg/m3, upholstered with fabric or leatherette. The leg is a welded assembly made up of stainless steel (grade SS 202) tube and plate. Overall Dimensions of Chair shall be Seat Height - 45.0 cm, Height - 82.0cm, Width & Depth of Chair as measured from pedestal - Width-205.5 cm and Depth-92.0 cm.Complete in all respect as per Godrej standard specification and as directed by the Engineer-in-charge.
1
-
-
Supplying/Assembling/ Fixed in postion Work stations (WISH PENTA WORKSTATION) of Godrej make or equivalent specification manufacturer like Heramn Miller/Steel Case/Vitra/Featherlite/Delite Hitech/ Dellform.WORKSTATION size app. 2.50X2.50 Mtr . Worktop as per the approved shape and site requirement made out of 25mm thick prelam particle board. All the open edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. The work surface shall be provided with circular cut out of Dia.65mm as per the requirement, for passing of wires. These cut outs shall be provided with ABS covers. Worksurfaces are fitted to the panels by worksurface brackets. Brackets are made of 2.0mm thick CRCA grade D steel as per IS : 513-19. Brackets are slide in between end trim and vertical extrusions. The product should be complete in all respect as per Godrej Std. specification and as directed by Engineer-In-charge.
4
-
-
Supplying and Placing in position Soffa Set (Broadway 2 Seater + 2 seater +Small Corner + 2 Arms ) of Godrej make Booadway MODEL or equivalent specification manufacturer like Heramn Miller/Steel Case/Vitra/Featherlite/Delite Hitech/ Dellform. Understructure is made from the assembly of top body asly. & bottom body asly. Top body asly. is made of combination of 12±1mm thk. plywood [moisture resistance & termile proof as per IS:303] & pinewood is of cross section 22x25mm is without major knots & defects on the surface. Cardboard is stapled on the outer vertical surface to get the surface to stick the foam. Bottom body asly. is made of combination of 12±1mm thk. plywood [moisture resistance & termile proof as per IS:303] & pinewood is of cross section 22x40mm is without major knots & defects on the surface. Cardboard is stapled on the outer vertical surface to get the surface to stick the foam. Complete understructure is made by gluing & stapling.Top lid: Top lid is made of 12±1mm thk. plywood [moisture resistance & termile proof as per IS:303]. Foam: Foaming is done on the outer surface of top body & bottom body from PU foam with density 22 kg/m3. · Upholstry: Top body asly., bottom body asly & top lid is upholstred seperately in the dual tone colour with fabric / fabric option & fabric / leatherite option. Top body asly. & bottom body asly. is fitted to each other by chipboard screws Top lid is fitted to the top body asly. with the MS chrome plated door hinge & chipboard screws.2. Legs: Plastic PP moulded legs are used & fitted at the bottom surface with the chipboard screws. Understructure: Understructure is made of combination of plywood & pinewood members. Plywood is 12±1mm thk. [moisture resistance & termile proof as per IS:303] & pinewood is of cross section 22x40mm is without major knots & defects on the surface. Complete understructure is made by gluing & stapling. · Foam: Front, back & outer vertical surface is made of PU foam with density 22 kg/m3. Inside curved, taper & vertical surface is made of PU foam with density 16 kg/m3. Top horizontal surface is made of PU foam with density 16 kg/m3. · Upholstry: Body upholstry is made in the dual tone colour with fabric / fabric option & fabric / leatherite option. 2. Back Top Cushion: · Understructure: Understructure is made of combination 12±1mm & 6±1mm thk. plywood with gluing & stapling. .Complete in all respect as per Godrej standard specification and as directed by the Engoneer-in-charge.
1
-
-
Electrical work Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B
85
-
-
Supply and fixing of recess mounted 2x2, 36W LED Aura-I series commercial luminaire fittings suitable for POP/Gypsum false ceiling , Model LCPL-36-CDL (2x 2) of Crompton/Havells/Philips/Wipro or equivalent with all accessories e.g. fixing clamps, suitable Installation frame, including cutting of holes in the false ceiling all complete.
24
-
-
Supply and fixing of recess mounted 36 watt,LED luminaire fittings of size (1148 x 67x 73) mm for 50 mm cutout suitable for POP/Gypsum false ceiling , Model DESTELLO50LR36WLED840SPMMAWH of Havells/Crompton/Philips/Wipro or equivalent with all accessories e.g. fixing clamps, suitable Installation frame, including cutting of holes in the false ceiling all complete.
20
-
-
Supply and fixing of recess mounted 6 watt LED Spot Light, ideal for wardrobes, furniture lighting, displays and interior decorations, Model LCSRR-6-CDL/TL/WW of Crompton or equivalent with all accessories e.g. fixing clamps, suitable Installation frame, including cutting of holes in the false ceiling/wooden panel all complete.
15
-
-
Supply and fixing of Round recess mounted 15 W, LED Slim Downlight fittings (suitable for POP/Gypsum false ceiling) with die- cast Aluminium housing finished in Premium white powder coating, Model -LCDE-15CDL of Crompton /Havells/Philips/Wipro or equivalent with all accessories e.g. fixing clamps, installation frame , including cutting of holes in the false ceiling all complete.
50
-
-
Supply and fixing of 400 mm sweep, 230 Volt, white plastic body & blades wall mounted fan with pull cords for speed regulator connection, testing and commissioning etc. as required. (High flo wave of CG or equivalent.)
12
-
-
Supply of 250mm sweep, 230 Volt, Exhaust Fan as required. (Make: Havells/Standard/CG or equivalent.)
3
-
-
Supply, installation, testing and commissioning of LED cove light of 5 meter strip with driver complete etc as required Make: FLEXISTRIP5MTRIP2055WLED830S of Havells/Crompton/Philips/Wipro Garnet or equivalent
20
-
-
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required up to 450mm sweep
4
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required
60
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required
30
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
400
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
400
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire
150
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
250
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 4 sq. mm + 2 X 4 sq. mm earth wire
250
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire
80
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 16 sq. mm + 2 X 6 sq. mm earth wire
80
-
-
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
4
-
-
Supplying and fixing of 6 way VTPN (IP43 protection)Metal door MCCB distribution board (make : L& T or equivalent) providing with suitable cable end box for three phase Outgoing with provision for MCCB as incomer with insulated vertical phase bus-bars, neutral bars with shrouds, earth bar, sticking saddles, cement spill protector, colour coded interconnecting wire set, cable ties and circuit identification lables with provision of 4 pole MCCB as incomer and TP/SP MCBs as outgoings including painting,earthing, connection, testing, commissioning etc as required. Incomer - DU125 H type ,FP MCCB, Thermal release range (100-125 Amp ),(Icu-30kA) - 1No. Outgoing - 10-32 A SP MCB (10kA)-18 Nos. L & T or equivalent.
1
-
-
Supplying and fixing of 6 way ETPN (IP43 protection)Metal door MCB distribution board (make : L& T or equivalent) providing with suitable cable end box with provision for phase bus-bars, nutral bars with shrouds, earth bar, sticking saddles, cement spill protector, colour coded interconnecting wire set, cable ties and circuit identification lables with provision of 4 pole MCB as incomer and SP MCBs as outgoings including painting,earthing, connection, testing, commissioning etc as required. Incomer - 63 Amps, FP MCB, C- curve, (Icu-10kA) - 1No. Outgoing - 10-32 Amp DP MCB(10kA), C- Curve - 18 Nos. L & T or equivalent.
2
-
-
Supplying and fixing of 12 way SPN (IP43 protection)Metal door MCB distribution board (make : L& T or equivalent) with provision of phase bus-bars, nutral bars with shrouds, earth bar, sticking saddles, cement spill protector, colour coded interconnecting wire set, cable ties and circuit identification lables with provision of double pole MCB as incomer and SP MCBs as outgoings including painting,earthing, connection, testing, commissioning etc as required. Incomer - 40- 63 Amps, DP MCB, C- curve, (Icu-10kA) - 1No. Outgoing - 10-32 Amp DP MCB(10kA), C- Curve - 10 Nos. L & T or equivalent.
1
-
-
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required
12
-
-
Providing & fixing of CRCA Sheet steel powder coated encloser with 1 no. 32 Amp, 'C' curv-10 KA, FP MCB and Din Channel for installing it including connection & body earthing complete as required. Legrand or equivalent.
2
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
250
-
-
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm)
12
-
-
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required.
200
-
-
Supply,Installation, testing and commissioning of 18 W LED tube light fitting , complete with all accessories and tubes etc. directly on ceiling / wall / fallceiling, including connections with 1.5 sq.mm. FR PVC insulated, copper conductor, single core cable and earthing etc. as required. Make ;-Bajaj / Philips / Crompton
20
-
-
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. (One run Cable)
250
-
-
Supplying and fixing RJ 45 Computer (LAN)modular socket on the existing modular plate & switch box including connections etc. as required
12
-
-
Supply & fixing of a 415V, 250Amps 4P MCCB, Thermal release range (200-250 Amp ),(Icu-25kA) with sitable sheet steel enclosure and cable entry gland box etc. on existing LT panel by drilling of holes on the angles of existing LT panel with supply of suitable nuts ,bolts & MS plate etc. required for fixing of the same all complete as per the requirement. Make: L & T or equivalent.
2
-
-
Supply of 1.1 KV grade, XLPE/ PVC insulated, PVC seathed, Aluminium conductor armoured power cables conforming to IS 7098 ( Part - 1) and ISI marked/Havells/Polycab/Gloster of following sizes.3 & 1/2 core 95 sq mm armoured cable.
90
-
-
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
-
-
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
25
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 35 sq. mm and upto 95 sq. Mm
60
-
-
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)
250
-
-
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm
MS flat clamp)
30
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3½ C X 95 sq. mm (45mm)
4
-
-
Supply Installation Testing and commissioning front operated Outdoor cubical type MV panel (Minium Size- 750 mm(L) X1200 mm (H) x600 mm(D), suitable for operation on 440V, three phase, 4wire, 50 HZ, AC supply system. The panel shall be fabricated by 14 SWG CRCA sheet steel with necessary anti-corrosive tretment and shall be dust , water and vermin proof construction along with body earthing, suitable for installation on Brick/concrete foundation (Minimum Height - 300 mm from ground level) with the following facilities:-Metering: 3 ph 4 wire (0-500V) Digital Voltmeter with Phase selector switch- 1set. (0-250A) Digital Ammeter with CTs and Phase selector switch- 1set. Phase indication lamps with fuse and control -3 Nos,as required. All are to be fitted inside the pannel, including connection,testing and comissioning.Incoming: 250A Thermal magnetic releases four pole MCCB 25 kA , (200 to 250Amps thermal release range) with both way spreader Link for termination.-1 Set. Make: L & T or equivalent).Bus Bar: 300A TPN Alu Bus bar (insulated).-1Set. Outgoing: (A) 100A Thermal magnetic releases range 80 to 100 Amps, four pole MCCB 25 kA with both way spreader Link for termination.-2 Set. Make: L & T or equivalent . B ) 63 Amps C curve, 4 Pole MCB -4Nos.
1
-
-
Supply , Installation, Testing and Commissioning of Automatic Hand Dryer (White), single phase, 230V, 50Hz, Dry hand time: 15-20 Sec, complete as required. Make: AVOR, Dolphy or equivalent.
3
-
-
Supply of following sizes copper conductor armoured XLPE insulated /PVC insulated , PVC seathed poer cable of 1.1 KV grade etc complete as required.2 C x 1.5 Sq.mm
150
-
-
Supply of following sizes copper conductor armoured XLPE insulated /PVC insulated , PVC seathed poer cable of 1.1 KV grade etc complete as required 3C x 1.5 Sq.mm
50
-
-
VRV/VRF WORK --- Supply, Installation, Testing and Commissioning of Modular Type outdoor units ,equipped with Highly Efficient Scroll, all Inverter Compressor(s), special heat exchanger, Y- branch as required, outdoor unit support, auto check function for connection error, auto address setting,Refrigerant temperature control and capacity as mentioned below. VRV/VRF System shall be suitable for working on 48 °C ambient temperature, Refrigerant R 410A. The unit price shall be inclusive of full charge of Refrigerant Gas & Oil, Freight, Insurance etc. as applicable in INR. having The unit shall have feature to automatically modulate the evaporative temperature between 6 deg C to 11 deg C with respect to load for better comfort and energy efficiency. The fan static pressure of the outdoor unit shall be more then 75 Pa to avoid hot air recirculation.The PCB Chamber of the outdoor unit should be refrigerant cool. Compressor and Outdoor Unit shall be of same OEM. Unit price shall be inclusive of full charge of Refrigerant Gas & Oil, Freight, Insurance as applicable In INR. The COP of systems mentioned below shall be Minimum 7.10 at 50% load/ at AHRI conditions in cooling conditions( Makes - Daikin / Mitsubishi Electric / Toshiba/ O General) Nominal Capacity in HP as stated below: 8 HP - Heat pump ( Heating + Cooling)
1
-
-
Supply, Installation, Testing and Commissioning of Modular Type outdoor units ,equipped with Highly Efficient Scroll, all Inverter Compressor(s), special heat exchanger, Y- branch as required, outdoor unit support, auto check function for connection error, auto address setting,Refrigerant temperature control and capacity as mentioned below. VRV/VRF System shall be suitable for working on 48 °C ambient temperature, Refrigerant R 410A. The unit price shall be inclusive of full charge of Refrigerant Gas & Oil, Freight, Insurance etc. as applicable in INR. having The unit shall have feature to automatically modulate the evaporative temperature between 6 deg C to 11 deg C with respect to load for better comfort and energy efficiency. The fan static pressure of the outdoor unit shall be more then 75 Pa to avoid hot air recirculation.The PCB Chamber of the outdoor unit should be refrigerant cool. Compressor and Outdoor Unit shall be of same OEM. Unit price shall be inclusive of full charge of Refrigerant Gas & Oil, Freight, Insurance as applicable In INR. The COP of systems mentioned below shall be Minimum 7.10 at 50% load/ at AHRI conditions in cooling conditions( Makes - Daikin / Mitsubishi Electric / Toshiba/ O General) Nominal Capacity in HP as stated below: 10 HP - Heat pump ( Heating + Cooling)
1
-
-
Supply, Installation, Testing and Commissioning of Modular Type outdoor units ,equipped with Highly Efficient Scroll, all Inverter Compressor(s), special heat exchanger, Y- branch as required, outdoor unit support, auto check function for connection error, auto address setting,Refrigerant temperature control and capacity as mentioned below. VRV/VRF System shall be suitable for working on 48 °C ambient temperature, Refrigerant R 410A. The unit price shall be inclusive of full charge of Refrigerant Gas & Oil, Freight, Insurance etc. as applicable in INR. having The unit shall have feature to automatically modulate the evaporative temperature between 6 deg C to 11 deg C with respect to load for better comfort and energy efficiency. The fan static pressure of the outdoor unit shall be more then 75 Pa to avoid hot air recirculation.The PCB Chamber of the outdoor unit should be refrigerant cool. Compressor and Outdoor Unit shall be of same OEM. Unit price shall be inclusive of full charge of Refrigerant Gas & Oil, Freight, Insurance as applicable In INR. The COP of systems mentioned below shall be Minimum 7.10 at 50% load/ at AHRI conditions in cooling conditions( Makes - Daikin / Mitsubishi Electric / Toshiba/ O General) Nominal Capacity in HP as stated below 18 HP - Heat pump ( Heating + Cooling)
1
-
-
Indoor Units:- Ductable type Supplying, Installation, testing and commissioning of ceiling Mounted ductable units equipped with pre filters,fan section with suitable static fan,multispeed motor,coil section with DX coil,outer cabinet,drain pan,.All indoor units should have force shut option to connect with fire alarm adapter,so that the unit automatically stops in case of fire.( Makes - Daikin / Mitsubishi Electric / Toshiba/ O General )Ductable Type Indoor Unit - 7.8 Tr
3
-
-
Indoor Units:- Ductable type Supplying, Installation, testing and commissioning of ceiling Mounted ductable units equipped with pre filters,fan section with suitable static fan,multispeed motor,coil section with DX coil,outer cabinet,drain pan,.All indoor units should have force shut option to connect with fire alarm adapter,so that the unit automatically stops in case of fire.( Makes - Daikin / Mitsubishi Electric / Toshiba/ O General )Ductable Type Indoor Unit - 6.4 Tr
2
-
-
Supply installation testing and commissioning of Refrigerant Piping Y-Joints or Headers as required to connect the above outdoor units and indoor units. ( Makes - Daikin / Mitsubishi Electric / Toshiba/ O General)
5
-
-
Supply installation testing and commissioning of Corded & Cordless remote ( Makes - Daikin / Mitsubishi Electric / Toshiba/ O General)
5
-
-
Copper Refrigerant Piping with Insulation for VRV System: SITC of Copper Refrigerant piping for VRV / VRF System complete with fittings, supports, jointing, insulation with class O -XLPE , gas charging & commissioning as per specifications, all accessories as per specifications and any other item required to make the system complete. Nominal Dia in mm OD as indicated below : 34.9 ( with 19 mm insulation )
10
-
-
Copper Refrigerant Piping with Insulation for VRV System: SITC of Copper Refrigerant piping for VRV / VRF System complete with fittings, supports, jointing, insulation with class O -XLPE , gas charging & commissioning as per specifications, all accessories as per specifications and any other item required to make the system complete. Nominal Dia in mm OD as indicated below : 28.6 ( with 19 mm insulation )
8
-
-
Copper Refrigerant Piping with Insulation for VRV System: SITC of Copper Refrigerant piping for VRV / VRF System complete with fittings, supports, jointing, insulation with class O -XLPE , gas charging & commissioning as per specifications, all accessories as per specifications and any other item required to make the system complete. Nominal Dia in mm OD as indicated below : 22.2 ( with 19 mm insulation )
25
-
-
Copper Refrigerant Piping with Insulation for VRV System: SITC of Copper Refrigerant piping for VRV / VRF System complete with fittings, supports, jointing, insulation with class O -XLPE , gas charging & commissioning as per specifications, all accessories as per specifications and any other item required to make the system complete. Nominal Dia in mm OD as indicated below : 19.1 ( with 13 mm insulation )
17
-
-
Copper Refrigerant Piping with Insulation for VRV System: SITC of Copper Refrigerant piping for VRV / VRF System complete with fittings, supports, jointing, insulation with class O -XLPE , gas charging & commissioning as per specifications, all accessories as per specifications and any other item required to make the system complete. Nominal Dia in mm OD as indicated below : 15.9 (with 13 mm insulation)
7
-
-
Copper Refrigerant Piping with Insulation for VRV System: SITC of Copper Refrigerant piping for VRV / VRF System complete with fittings, supports, jointing, insulation with class O -XLPE , gas charging & commissioning as per specifications, all accessories as per specifications and any other item required to make the system complete. Nominal Dia in mm OD as indicated below : 12.7 ( with 13 mm insulation )
7
-
-
Copper Refrigerant Piping with Insulation for VRV System: SITC of Copper Refrigerant piping for VRV / VRF System complete with fittings, supports, jointing, insulation with class O -XLPE , gas charging & commissioning as per specifications, all accessories as per specifications and any other item required to make the system complete. Nominal Dia in mm OD as indicated below : 9.5 ( with 13 mm insulation )
30
-
-
CONTROL CABLING Providing & fixing control cum transmission wiring of 2 core x 1.5 sqmm copper in suitable conduits between indoor units and outdoor units and indoor units and remote controllers.
90
-
-
Drain Piping: SITC of PVC (Minimum 10 Kg/Sqcm pressure rated) Drain Water Piping complete with fittings (elbows, tees, reducers, sockets etc.), supports, jointing and any other item required to make the system complete. Nominal Diameters of Pipes in mm as indicated below: 32 mm ( with 6 mm Insulation)
25
-
-
Drain Piping: SITC of PVC (Minimum 10 Kg/Sqcm pressure rated) Drain Water Piping complete with fittings (elbows, tees, reducers, sockets etc.), supports, jointing and any other item required to make the system complete. Nominal Diameters of Pipes in mm as indicated below: 40 mm ( with 6 mm Insulation)
18
-
-
AIR DISTRIBUTION SYSTEM Supplying, fabricating, installing and testing of G.I. Sheet metal ducts and flanges complete with supports, Vanes, dampers, links, levers and quadrants etc. as per specifications and drawings. The rates shall include all materials and labour for suspension and supporting arrangement of galvanised steel for Plenums, Ducts, complete with fire retardant factory fabricated. flexible connection as per required specifications etc complete as required.22 G
18
-
-
AIR DISTRIBUTION SYSTEM Supplying, fabricating, installing and testing of G.I. Sheet metal ducts and flanges complete with supports, Vanes, dampers, links, levers and quadrants etc. as per specifications and drawings. The rates shall include all materials and labour for suspension and supporting arrangement of galvanised steel for Plenums, Ducts, complete with fire retardant factory fabricated. flexible connection as per required specifications etc complete as required.24 G
125
-
-
Supplying, installing of external thermal Insulation on ducts with approved sample of cross linked closed cell 9mm thick duct Insulation as per specification complete as required.
150
-
-
Supplying &. fixing of powder coated extruded aluminium Air Grills / Diffusers with volume control dampers as per specification complete as required.
5.5
-
-
Canvas Connection in Ductable Acs as per requirement
5
-
-
Motorized Volume Control Damper for controlling two IDU with as per requirement.
4
-
-
Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in conve'lient sections, JOined with connectors, suspended from the ceiling with M.S. suspenders / angle supports spacing OOOmm apart through the length as specified including the cost of threaded rod hangers, hooks, dash fasteners etc for suspension from ceiling as required complete as per instruction of Engineer in charge I Architect for External Pipes. 450mm width x 75mm depth x 1.2mm thickness.
15
-
-
Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in conve'lient sections, JOined with connectors, suspended from the ceiling with M.S. suspenders / angle supports spacing OOOmm apart through the length as specified including the cost of threaded rod hangers, hooks, dash fasteners etc for suspension from ceiling as required complete as per instruction of Engineer in charge I Architect for External Pipes.150mm width x 75mm depth x l.2mm thickness.
8
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements