Irrigation And Flood Control Department Tender

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate.

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand).

Providing and fixing rubber tile flooring 25mm thick made of SBR (Styrene Butadiene Rubber) with interlocking arrangement and adhesive all complete and size as approved by the Engineer-in-charge.

Supply & fixing of Health Walker of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness Make or any other make as approved by Engineer-in-charge.The products must tested and certified to meet EN16630 safety standards with GS test mark. The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. An internal Limiter is fitted inside to prevent the equipment from moving uncontrollably.The Foot rest and Base plate covers are manufactured from Virgin LLDPE. Bearings : Maintenance-free ball bearings. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H)1064×520×1250mm . Capacity 1 persons.All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines.

Supply & fixing of SIT UP of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness Make or any other make as approved by Engineer-in-charge. The products must tested and certified to meet EN16630 safety standards with GS test mark.The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. The Seat and Base plate cover are manufactured from Virgin LLDPE. Bearings : Maintenance-free ball bearings. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H) 1480×1200×630mm . Capacity 2 persons.All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines.

Supply & fixing of SELF WEIGHTED ROWER of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness Make or any other make as approved by Engineer-in-charge. The products must tested and certified to meet EN16630 safety standards with GS test mark. The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. An internal Limiter is fitted inside to prevent the equipment from moving uncontrollably. Bearings : Maintenance-free ball bearings. The Seat, backrest and Base plate cover are manufactured from Virgin LLDPE. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H) 1260×800×920mm. Capacity 2 persons.All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines.

Supply & fixing of BIG SHOULDER WHEEL of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness Make or any other make as approved by Engineer-in-charge. The products must tested and certified to meet EN16630 safety standards with GS test mark. The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. Bearings : Maintenance-free ball bearings. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H)870×767×1940mm . Capacity 2 persons.All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines.

Supply & fixing of WAIST TWISTER of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness Make or any other make as approved by Engineer-in-charge. The products must tested and certified to meet EN16630 safety standards with GS test mark. The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. An internal Limiter is fitted inside to prevent the equipment from moving uncontrollably. Bearings : Maintenance-free ball bearings. The Base plate cover is manufactured from Virgin LLDPE. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H) Ø1400×1350mm.Capacity 3 persons.All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines.