Irrigation And Flood Control Department Tender
... More
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Irrigation And Flood Control Department Tender
Coronavirus COVID 19
Eprocure
Opening Date14 Nov 2019
Closing Date22 Nov 2019
Tender Amount₹ 5,86,42,351
Costs
EMD
₹ 11,72,847Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_IFC_183804_1Bid Award Id
ViewTender No
EE/CD-XIII/2019-20/Acs./123Tender Authority
Irrigation And Flood Control Department ViewPurchaser Address
-Website
http://govtprocurement.delhi.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to C&D waste processing plant, Burari or as approved by Engineer-in-charge within the lead of 31 KM and all lifts involved.
73
-
273.35
... More
Earth work in rough excavation, banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and lift upto 1.5 m : All kinds of soil
5086
-
427.9
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil
4094
-
125.95
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
1101
-
166.4
... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil
5019
-
51.75
... More
Extra rates for quantities of works, executed :In or under water and/or liquid mud, including pumping out metre water as required. Note:-The extra percentage rate is applicable in respect of each item but limited to quantities of work executed in these difficult conditions. The unit, namely, metre depth, to be considered for payment, shall be the depth measured from the sub soil water level upto the centre of gravity of the quantity executed in difficult conditions. The depth shall be reckoned correct to 0.1 metre. 0.05 metre or more shall be taken as 0.1 metre and less than 0.05 metre ignored. ( Assuming the sub-soil water level to be 5 m)
138.95181000000002
-
25.19
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
2858
-
125.75
... More
Supplying, filling, spreading & leveling stone boulders of size range 5cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
106
-
921.9
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
106
-
1038.05
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
40
-
917.75
... More
Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation.
1300
-
76.65
... More
Supplying and stacking at site. Over burnt (Jhama) brick aggregate 120 mm to 40 mm.
248
-
653.7
... More
Providing and fixing in position 1 x 1 m maximum sized, Irregular shapeed natural Rock as per design to create ROCKS Garden. The design should be approved by the Architects. It should be kept natural, creack proof durable, environment friendly, install, all complete including base etc.
20
-
5742.2237000000005
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
160
-
4478.15
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size).
2
-
3959.7
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
49
-
5924.65
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).
154
-
5481.95
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size).
468
-
6215.35
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
486
-
7145.8
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
12
-
7390.8
... More
Centring and shuttering including strutting, propping etc and removing of form for Foundation, footings, bases of columns and Tie beams etc. for mass concrete
818
-
193.95
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc. (for RCC structure)
4208
-
378.6
... More
Centring and shuttering including strutting, propping etc and removing of form for Suspended floors, roofs, landings, balconies and access platform.
83
-
422.3
... More
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).
198
-
171.5
... More
Steel reinforcement for RCC work including supply, straightening, cutting, bending, placing in position and binding all complete upto plinth & above level. Thermo-Mechanically Treated bars. Of grade FE-500D or more
97687
-
56.6
... More
Brick work with common burnt clay F.P.S. ( non modular) bricks of class destination 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
324
-
4970.3
... More
Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.
144
-
6818.6
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
5891
-
67.6
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. : Electric resistance or induction butt welded tubes. :
150
-
112.2
... More
Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-in-charge.
2852
-
217.15
... More
Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in approved design. The glass mosaic tiles shall be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. All completed as per direction of Engineer-incharge.
74
-
1603.75
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work.
77
-
122.5
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade
448
-
594.65
... More
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : White sand stone - Exposed face machine cut and table rubbed with rough backing 30 mm thick
128
-
3352.15
... More
Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.( Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).
34
-
4722.2
... More
Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. Pipes 40 mm dia and 450mm long with 150x150x6mm M.S. plate welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size), including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing.
50
-
516.95
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour 8 pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineerin- Charge. 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern.
350
-
638.95
... More
Making bajri path including preparation of subgrade, supplying and laying brick aggregate of 50 mm nominal size 7.5 cm deep with blinding material consisting of 12 mm moorum and 12 mm red bajri consolidated with road roller.
1300
-
142.5
... More
Stone work (machine cut edges Veneer work) for wall lining upto 10 m height, backing filled with a grout of 12 mm thick cement mortar 1:3 (1 Cement : 3 coarse sand) and jointed with Cement mortar 1:2 (1 cement : 2 stone dust), including rubbing and polishing complete. (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately). Kota stone slabs exposed face dressed and rubbed. 25 mm thick
257
-
1801.1
... More
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Red sand stone - Exposed face machine cut and table rubbed with rough backing 30 mm thick
93
-
3328.95
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
107
-
362.6
... More
Providing and fixxing on flooring by using WPC Decking (150 x 2800 mm 25mm thick), with joist and clips. (Choclate color) including Fitting charges of WPC Decking all complete
100
-
3438.04
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
66
-
5012.65
... More
Providing and laying Kerb ( KS – ) Triangular car stopper- wheel stopper ( Road Edge KERB size 2000 x 125mm ) Precast Concrete Kerb Stones ( of KKPrecast concrete Pv. Ltd , manufactured by M - 30 grade of concrete by using vibro compaction process with jointless FRP moulds, so as to get shuttering finish.
50
-
609.5
... More
Providing and laying 110 mm outer dia HDPE DUCT Pipe , This includes making perforation on half the pipe to collect water, And rap the pipe with non- oven Geotextile sheet all around jointing of pipes & fitting with one step HDPE solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge.
1348
-
857.43
... More
Providing and laying Pabble finished tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.
120
-
1562.1700596939997
... More
Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg / m3, 50mm thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building.
74
-
425.1
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
837
-
472.4
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 8.13.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
83
-
2937.7
... More
Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade. 8mm thick (mirror polished and machine cut edge) Granite stone of any colour and shade
144
-
1796.65
... More
Supplying hard stone of minimum size 22.50cm for stone masonary includig royality and carriage to the work with all lead & lifts including loading, unloading and stacking at site complete.
1049
-
1146.5
... More
Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500, of required size, Mesh Type 10 x 12 (D=100 mm with tolerance of ± 2%) Zinc+PVC coated, Mesh wire diameter 2.7/3.7mm, mechanically edged/selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2/ 3.2mm(ID/OD), supplied @3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all complete as per directions of Engineer-in- charge.
656
-
2692.75
... More
Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2 mm thick flat
15
-
883.6
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular tank
5500
-
7.25
... More
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore
5
-
366.2
... More
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 5.5 mm
5
-
389.45
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore
15
-
555.3
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
18.52.1 15 mm nominal bore
15
-
545.95
... More
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore
20
-
285.7
... More
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 20 mm dia nominal bore
20
-
316.2
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : 17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern
3
-
6187.4
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
7
-
2298.55
... More
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads andu PVC extruded interlocks, EPDM gasket, wool pile, zinc alloy(white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealant shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm)
2
-
6889.55
... More
Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm)
16
-
8016.65
... More
Providing half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:3 (1 Cement : 3 coarse sand) in superstructure for closing cavity 5 to 7.5 cm wide in cavity wall complete with 10 cm / 11.4 cm wide bitumen felt type 3 grade 1.
17
-
192.2
... More
Fabrication supplying and erection of flange mounted hot dip Galvanized octaqgonal Poles of 5 Mtr. Height made from 3mm thick steel plate having bottom Dia of 130 mm & top Dia of 70mm complete with window with flash cover at the height of 2.00 Mtr from the base of cable termination Block etc. and galvanization base plate of size 200mm x 200mm x12mm thick on existing cement concrete pedestal as required including suppling and fixing of laminated sheet, DIN channel, BUS Bar and earth sheet 2 Nos. welded at suitable height as per direction of Enginer-in-charge. 2 Nos. washer, nuts and locking arrangement completed as required (make Bajaj/Volmont/Phillips/Lysaght)
28
-
13252
... More
Supplying and fixing of 4 Nos. 20mm x 700mm long GI foundation bolt (EN 8 grade) with nuts washer including 2 Nos. template of 3mm thick size 200mmx200mmx12mm thick with 4 Nos. 16mm Dia holes to match with PCD of poles base plate as required (make Bajaj/Volmont/Phillips/Lysaght)
28
-
1293
... More
Fabrication supplying and fixing of galvanized single arm bracket 500mm long galvanized top tube with 1000mm long 48.30x3.20mm thick each side galvanized single over hang with tightening bolts etc as required (ordinary) (make Bajaj/Volmont/Phillips/Lysaght)
14
-
1710
... More
Fabrication supplying and fixing of galvanized double arm bracket made out of 88.9mm Dia 400mm long galvanized top tube with 2000mm long 48.30x3.20mm thick each side galvanized single over hang with tightening bolts etc as required (ordinary) (make Bajaj/Volmont/Transrail/Crompton)
14
-
2629
... More
Supplying,Installation,Testing and Commossioning of 40 watts smart integrated all in one solar light of Highly efficient IP65 LED Solar Lighting System with built-in high efficiency Solar Panel, LED Light and long-life PO4 battery with high efficiency microprocessor-based charge controller, p/r motion sensor and compact in size to be mount on pole top complete etc. as required.
28
-
52346
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kinds of soil Pipes, cables etc, not exceeding 80 mm dia.
400
-
138.05
... More
Laying one number PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/Metal pipe as required upto 35 Sq.mm
100
-
18
... More
Supplying and laying double walled corrugated (DWC) High Density Poly ethylene (HDPE) pipe of 125/105 size having corrugation on the outer wall and plain surface on inner wall confirming to IS 14930 (Part I & II) below the ground level excluding excavation refilling the trench etc. as per specification etc. as required
400
-
151
... More
Supplying & testing of PVC insulated armored and PVC Sheathed (genral pupose ) multi core cable with standard aluminium conductor suitable for working voltage upto and including 1100 volts confirming to IS1554/pt/88 with amendment NO. as required 4x 16 Sqmm (finolex havells polycab)
500
-
187
... More
Supplying & drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel / PVC conduit as required 2 x 2.5 Sqmm
280
-
53
... More
Supplying & fixing 5 amps to 32 amps rating, 240/415 volts 'C' curve miniture circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection, testing and comissioning etc. as required A) Single pole.
28
-
173
... More
Earthing with GI earth pipe 4.5 Mtr long, 40 mm Dia including Accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal /coke and salt as required
2
-
3672
... More
Providing and laying 6 SWG G.I. wire on surface or in recess for loop earthing along with existing surface/recessed/conduit/sub main
500
-
23
... More
Fabrication supplying and installation of outdoor type cubical feeder pillar of suitable size not less than 30 cm and upto 45 cm deep made out of M.S. Sheet 2mm thick (14SWG) duly compartmentalized having 4 strip busbar of 200 amp capacity double door with locking arrangements for protection from rain dust duly fixed on M.S. angle iron frame work of size 50 mm x 50 mm x 6 mm (NS) 110 cm long legs out of which 50cm duly grouted in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone agreegate 20mm) having following accessories mounded inside the cubical panel including connection inter connection/soild with aluminum timbles earthing with two nos. earth studs duly painted with one coat of red oxide and two coats of superior quality enamel paint completed etc. as required having also compartment for energy meter. Supplying and fixing of following accesssories in the existing cubical panel board/feeder pillar including connection testing etc. as required having also compartment for energy meter
Supplying and fixiing of folowing accessories in the existing cubical pnal board/feeder pillar including connection testing etc. as required incomer 125 Amp .35KA MCCB with thermal release 1 No. Outgoing A) 63Amp - DPMCB - 6 Nos. B) 63Amp - ELCB - 1 Nos. C) C.T. Opetrating . D) Tongal Switch E) Voltmeter 0-5000 volts 96 Sqm flush type with selector switch F) Ampere 0-100/5 sqmm Flush type with selector Switch & 100/5 Amp ratio cts G) Indication Lamp (ryb) with control 3 pole (ML-6) 95 Amp H) Power contactor 3pole (ML-6) 95 AMP I) Auto timer Rex modular D41 model MDS make J) Danger notice plate.
1
-
45835
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group C (1.8.3)
120
-
714
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. 2 x 4 sq.mm
1000
-
79
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. 2 x 6 sq.mm
500
-
115
... More
Supplying, installation, Testing and commissioning of outdoor LED Strip light, 25 W waterproof with driver IP 65 complete with all accessories as required at site.(Model No. Cat No. Nxt 25 Watt white/warm white/Neutral white Make Phillips/Bajaj/Crompton/Helonix/Havells/Orient)
100
-
284
... More
Supplying, installation, Testing and commissioning of wall recessed 4 W LED step lights in white powder coated cast aluminum body with IP 54 protection complete with all accessories etc. as required at site.(Model No. Cat No.BLSGV 4 W Make Phillips/Bajaj/Crompton/Helonix/Havells/Orient).
40
-
2321
... More
Supplying, installation, Testing and commissioning of tree uplighters/spike mounted uplighters 6/9 watt LED lights with dia cast aluminum housing designed for rugged outdoor usage with IP 65 protection complete with all accessories etc.as required at site. (Model No. Cat No.BGSBL 9 W Make Phillips/Bajaj/Crompton/Helonix /Havells/Orient).
80
-
4062
... More
Supplying, installation, Testing and commissioning of Bollards 3 ft. (Tulip,Mushrumz) 8/9 watt LED bollard with opal acrylic diffuser with IP 65 protection complete with all accessories etc. as required at site.(Model No. Cat No.BGBOM 9 W/BLBMC 9 W Make Phillips/Bajaj/Crompton/Helonix/Havells/Orient).
300
-
5222
... More
Open timbering in case of shafts, wells, cesspits, manholes and the like including strutting and shoring complete (Measurements to be taken of the face area timbered): Depth not exceeding 1.5 m
557.35
-
48.7
... More
Open timbering in case of shafts, wells, cesspits, manholes and the like including strutting and shoring complete (Measurements to be taken of the face area timbered): Depth exceeding 1.5 m but not exceeding 3 m
108.31300000000002
-
55.2
... More
Open timbering in case of shafts, wells, cesspits, manholes and the like including strutting and shoring complete (Measurements to be taken of the face area timbered): Depth exceeding 3 m but not exceeding 4.5 m
145.04380000000003
-
63.85
... More
Supplying, stacking and laying of stone solling i.e. packing with smaller stone and consolidationg with steel rammer including spreading and consolidating of binding material mooram or earth etc. complete.(payment to be made for quantity of only stone solling used after deduction voids excluding binding materials).
18.686925000000002
-
1015.2
... More
Mixing and applying 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) for RCC work
4025.909149999999
-
143.8
... More
Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : Two or more coats on new work
968.1707000000002
-
65.2
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Rectangular shape 600x450 mm internal dimensions
6
-
1073.05
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works using L Shape angle, Holding pipe and others in lumpsum quantities
5733.272387500001
-
85.95
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
172.41490000000002
-
472.4
... More
Bright finished or black enameled mild steel butt hinges 125x 65 x 2.12 mm
60
-
14
... More
Welding by gas or electric plant including transportation of plant at site etc. complete. (For Butt Hinge)
3060
-
2.85
... More
Supplying at site : R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-incharge (cost of earth works in excavation, concrete works in foundation to be paid separately).
3.7600000000000007
-
19774.55
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter
43
-
236.35
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter
50
-
148.75
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5° 75 mm bend
5
-
76.55
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :125 mm diameter Class II
3
-
4329.1
... More
Supplying, filling, spreading & leveling gravels of size range 20 mm to 40 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
548.55
-
1038.05
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (Stone Boulder 50 mm to 200 mm)
1279.9499999999998
-
921.9
... More
Providing and sprinkling Bio-Culture (Bioneer- Propriety items, NEERI) in proportion 1 litre per 10 KLD (Capacity of STP) as per directions of NEERI/ its approved licencees during commisioning or phase of acclimitization of plants.
60
-
6750
... More
Supplying and placing plants of approved species ( in arrangement format - 6 Nos. per square meter) on the top surface of Phytorid bed as per direction of NEERI/ its authorised licencees.
795
-
1000
... More
Providing and setting up Hypo-Chloride Dozing System(HDPE make) of tank capacity 500ltr with dozing pump of capacity 0-10 lph in two numbers with agitator of any make ISI.
1
-
93655.63602500001
... More
Design, supply, installation, commissioning & testing with satisfactory test & trial of 3 phase fully Submersible Non Clog sewage lifting pumps for sewage transfer from sump well to sedimentation tank with pedastal base frame grouted in foundations. Capacity- 7cum/hr Duty head - 15 Mtr Moc-CI B.H.P - 2.0 Anchor fastener for mounting rain cap pressure gauge-feeding / AKAI (ISI)
3
-
88972.85422375
... More
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). All kinds of soil
349
-
45.85
... More
Supplying and stacking at site dump manure from approved source, including carriage up to 1 km (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 4.75 mm
2093
-
209.15
... More
Providing, laying and turfing Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge.
1615
-
77
... More
Providing of Aglaonema Parrot Jungle plant (three in one), having ht. 30 cm and above with 20 to 25 leaves, well developed, fresh & healthy in 25 cm size of Earthen pot / Plastic pots
3220
-
60
... More
Providing of Aglaonema dove variety Plant, having ht. 30 cm to 45 cm with 8 to 10 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot.
2576
-
80
... More
Providing of Aglaonema Pseudo bractatum plants, having ht. 30 cm and above with 3 to 4 suckers & 20 to 25 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot
2576
-
80
... More
Providing of Aglaonema Snow White hybrid plant (three in one), having ht. 30 cm & above with 6 to 8 leaves, bright colour, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot. (Specimen Plant).
2576
-
200
... More
Providing of Aglaonema Silver Queen plant, having ht. 30 cm to 45 cm. with 12 to 15 leaves, multi suckers, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot.s
8000
-
150
... More
Providing of Aglaonema Ernesto Plant (three in one), having ht. 45 cm & above with 12 to 15 leaves,well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot.
3000
-
175
... More
Providing of Aglaonema marentifolium variety plant, having ht. 23 cm to 30 cm with 8 to 10 leaves, well developed, fresh and healthy with colourfull leaves in 20 cm size of Earthen pot / Plastic pot.
3000
-
60
... More
Providing of Aglaonema marentifolium variety plant, having ht. 23 cm to 30 cm with 8 to 10 leaves, well developed, fresh and healthy with colourfull leaves in 20 cm size of Earthen pot / Plastic pot.
500
-
175
... More
Providing of Araucaria cookie plant, having ht. 75 cm to 90 cm, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 25 cm size of Earthen pot / Plastic pot.
2700
-
200
... More
Providing of Areca Palm plant, having ht. 1.20 m to 1.50 m with 5 to 6 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot / Plastic pot.
3000
-
150
... More
Providing Plant Allyssum white in full bloom well developed fresh & healthy Plant in 20 cm Earthen Pot/Plastic Pot.
200
-
40
... More
Providing Plant Antirrhinum Hybrid dwarf variety, specimen (8-10 plants) with fresh & healthy foliage in full bloom well developed in 35 cm Earthen Tray/Challi Pot
150
-
500
... More
Providing Plant Brachycome well developed with fresh & healthy foliage with 100 to 120 flowers stacking with green painted bamboo stick in 25 cm Earthen Pot/Plastic Pot.
150
-
120
... More
Providing Plant Chrysenthemum single named variety in different colour well developed, having 45 to 60 cm ht., minimum 150 and above half bloom flowers well stacked with bamboo stick having three layer tiding by thread fresh and healthy foliage in 30 cm Earthen Pot
100
-
140
... More
Alpinia Variegated (three in one) plant having ht. 30 cm and above, with fresh and healthy variegated foliage in 25 cm size of Earthen Pot / Plastic Pot
4815
-
110
... More
Alternanthera species plant of height 15 cm to 20 cm, full of branches and foliage in 15 cm size of Earthen Pot / Plastic Pot.
1000
-
20
... More
Asparagus marrie plant, well developed 15 to 20 leaves, full of branches and foliage in 25 cm size of Earthen Pot / Plastic Pot.
1000
-
50
... More
Asparagus sprengeri plant of height 30 cm to 45 cm, full of leafy branches in 20 cm size of Earthen Pot / Plastic Pot.
500
-
20
... More
Aspidistra plant, having 10 to 15 leaves well developed with fresh & healthy in 25 cm size of Earthen Pot / Plastic Pot.
578
-
40
... More
Clerodendron inerme plant having ht. 25 cm to 32 cm multi branched in 20 cm size of Earthen Pot / Plastic Pot.s
1000
-
20
... More
Clerodendron inerme plant of ht. 30 cm to 40 cm multi branched in 25 cm size of Earthen Pot / Plastic Pot.s
2000
-
20
... More
Chlorophytum (Green) plant, full of leafy suckers in 20 cm size of Earthen Pot / Plastic Pot.
6000
-
20
... More
Chlorophytum-variegated plant, full of leafy suckers in 15 cm size of Earthen Pot / Plastic Pot.
4815
-
20
... More
Cuphea chinensis plant of ht. 30-45 cm full of branches and healthy foliage in 25 cm size of Earthen Pot / Plastic Pot.
3852
-
20
... More
Dianella variegated plant, with 3 to 4 variegated leaves in 20 cm size of Earthen Pot / Plastic Pot.
3852
-
30
... More
Duranta Golden plant, having ht.15 to 20 cm bushty shape plant with fresh and healthy leaves in 20 cm size of Earthen Pot / Plastic Pot.
5000
-
20
... More
Euphorbia milli hybrid variety plant, having ht.30 cm to 45 cm with multi branch, full bloom, fresh and healthy leaves in 20 cm size of Earthen Pot / Plastic Pot.
500
-
70
... More
Euphorbia milli hybrid variety plant, having ht. 30 cm to 45 cm with multi branch, full bloom, fresh and healthy leaves in 30 cm size of Earthen Pot / Plastic Pot.
2000
-
100
... More
Ipomea (Golden leaves) plant,with fresh and healthy leaves in 15 cm size of Earthen Pot / Plastic Pot.
2000
-
20
... More
Iresine herbstii plant, of height 20-30 cm. full of branches well developed in 15 cm size of Earthen Pot / Plastic Pot.
2000
-
15
... More
Iresine herbstii plant, of height 20-30 cm., full of branches well developed in 20 cm size of Earthen Pot / Plastic Pot
578
-
20
... More
Syngonium golden of height 30-45 cm. with 2-3 suckers healthy foliage in Earthen Pot/Plastic Pot of size 20 cm.
578
-
30
... More
Syngonium miniature dwarf plant, having height 30-45 cm. with 2-3 suckers healthy foliage in Earthen Pot/Plastic Pot of size 20 cm.
578
-
40
... More
Syngonium variegated plant,of height 30-45 cm. with 2-3 suckers healthy foliage in Earthen Pot/Plastic Pot of size 20 cm.
578
-
20
... More
Tradiscantia plant, full of leaves in Earthen Pot/Plastic Pot of size 20 cm.
578
-
20
... More
Wadelia trilobata plant,full of leaves in 15 cm size of Poly bags.
578
-
15
... More
Zebrina Trades cantia plant having in 20 cm size of Earthen Pot / Plastic Pot.
3000
-
20
... More
Allamanda cathartica plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots
1000
-
40
... More
Supply and stacking of Azadirachta indica ( Neem ) plant of height 120- 130cm in big polybag of size 25 cm as per direction of the officer-in-charge.
40
-
60
... More
Supply and stacking of Bassia latifolia (Mahua) plant of height 90-105 cm. in big polybag of size 25 cm as per direction of the officer-in-charge.
40
-
60
... More
Supply and stacking of Bauhinia blakeana (Kachnar) plant of height 120- 150 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
25
-
80
... More
Supply and stacking of Bauhinia purpurea (Kachnar) plant of height 150- 165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
25
-
50
... More
Supply and stacking of Bombax ceiba plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
5
-
70
... More
Supply and stacking of Bottle palm plant of ht. 150-180 cm bottom girth 20-25 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge.
25
-
180
... More
Supply and stacking of Bottle palm plant of ht. 210-240 cm bottom girth 30-35 cm well developed in big HDPE bags.
25
-
350
... More
Supply and stacking of Bottle palm plant of ht. 270-300 cm bottom girth 40-50 cm well developed in big HDPE bags as per direction of the officer-in-charge.
25
-
550
... More
Supply and stacking of Butea frondosa (Flame of Forest) plant of height 60-75 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
5
-
55
... More
Supply and stacking of Callistemon lanceolatus plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
15
-
60
... More
Supply and stacking of Casuarina equisetifolia plant of height 150-165 cm
in big poly bags of size 25 cm as per direction of the officer-in-charge.
25
-
55
... More
Supply and stacking of Cassia fistula (Amaltash) plant of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
20
-
60
... More
Supply and stacking of Cassia siamea plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
5
-
60
... More
Supply and stacking of Cassia javanica plant of height 120-150 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
5
-
80
... More
Supply and stacking of Cassia nodosa plant of height 120-150 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
25
-
60
... More
Supply and stacking of Ceiba pentandra plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
15
-
60
... More
Supply and stacking of Chorisia speciosa plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
25
-
80
... More
Supply and stacking of Chukrassia tabularis plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
25
-
60
... More
Supply and stacking of Delonix regia (Gulmohar) plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge
5
-
60
... More
Providing and installation of floating rafter at site of water body i/c supply of material viz. sponge foam, geosynthetic non-woven fabric, concrete block, U-PVC pipes, PVC fibrenet, specified group of plants, bio-culture housing, GI wire, etc and assembling as per drawing / approved design and as per directions of engineer-in-charge. The cost shall include maintanance of rafter including (replacement of plants or rafter if required) for 03+12 months (commissioning period+maintanance period).
294
-
17649.552129999996
... More
Providing and supplying at site: Air Blower (10HP, 371 m3/hr) Make – Either ISI marked / Any make approved by I&FC
1
-
269907.3
... More
Providing and supplying at site: Air DiffuserMake – Either ISI marked / Any make approved by I&FC
Type – non retrievable with air grid
Dimension – 750mm * 63mm inner Ø
Air Flow – 12m3+N/m*H max
Specs – Air Tube Diffusor with Flex norm (Silicon ) membrane sleeve
124
-
4429.248
... More
Providing and supplying at site: UPVC pipe (Main) Size - Dia. 100mm Make – Either ISI marked / Any make approved byI&FC
61
-
484.449
... More
Providing and supplying at site: UPVC pipe (Branch) Size - Dia. 40mm Make – Either ISI marked / Any make approved by I &FC
184
-
207.62099999999998
... More
Providing and supplying at site: Earthing with GI earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
10
-
12372.82746
... More
Supplying and laying 25 mm X 5 mm GI strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
10
-
2159.2584
... More
Providing and supplying at site: Starter Panel
1
-
27682.8
... More
Supply and installation of Cabling in conduit includes POLYCAB / INDOCAB cables & 4 core for Sump Pump 4mm2 Al Armoured)
10
-
415.24199999999996
... More
Instalation charges for Aeration System.
1
-
56370
... More
Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (All T & P material/articles shall be provided by the contractor.) Play grounds / Public parks (as per yard stick 1Mali =2.00Acre)
432000
-
1.4
... More
Providing round the clock security guard without gun for watch & ward of Government premises and its all belongings by deploying neatly dressed security guards in 8 hour's shift including necessary T&P like torch, lathi and uniform etc.complete,as per directions of Engineer-in-charge.(One job means 8 hour's duty).
3600
-
487.95
... More
Providing labour for attending Misclanious work including sweaping of footpath/ collection of garbage, cleaning of screaning Bars etc complete.
5400
-
427.45
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements