Central Pollution Control Board Tender

12 mm cement plaster of mix 1:6 (1 cement : 6 fine sand)

Providing and Fixing 15 mm thick densified tegular edged eco-friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening“for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.

Manufacturing, assembling. Transporting and placing in position knock down modular furniture such as office table, drawer unit, side rack, wall hung file storage cabinet, ward robe storage/ almirah etc configured of modular panels of particle board as per drawing, specifications and direction of the Engineer-in-Charge. All outer exposed edges of all the panels shall be covered and sealed with 2mm thick pvc edge banding tape, Rehau or Dolkin or equivalent make and all concealed and butt edges of all panes shall be covered and sealed with 0.70mm thick pvc edge banding tape of same make with hot melt glue on edge banding machine at 200° c temperature. All joinery fabrication work shall be done with mini fix fittings and plastic dowels in approved factory including cost of mini fix fittings, pvc cable wire manager, Nylon glides 20mm, plastic dowels etc. Manufacturing, assembling. Transporting and placing in position knock down modular furniture such as office table, drawer unit, side rack, wall hung file storage cabinet, ward robe storage/ almirah etc configured of modular panels of particle board as per drawing, specifications and direction of the Engineer-in-Charge. All outer exposed edges of all the panels shall be covered and sealed with 2mm thick pvc edge banding tape, Rehau or Dolkin or equivalent make and all concealed and butt edges of all panes shall be covered and sealed with 0.70mm thick pvc edge banding tape of same make with hot melt glue on edge banding machine at 200° c temperature. All joinery fabrication work shall be done with mini fix fittings and plastic dowels in approved factory including cost of mini fix fittings, pvc cable wire manager, Nylon glides 20mm, plastic dowels etc. (cost of providing and fixing of fittings to modular furniture such as drawer slides, self closing spring loaded hinges, multipurpose locks, knob/handles etc shall be paid separately)

18mm thick flat pressed, three layered pre- laminated particle board with both side decorative lamination (medium density) Grade I, type II conforming to IS:12823 (exterior grade)

25mm thick flat pressed, three layered pre- laminated particle board with both side decorative lamination (medium density) Grade I, type II conforming to IS:12823 (exterior grade)

Providing and fixing MS power coated knob oval shaped handles of ITALICA or equivalent make patent no. 163465 with screws complete

Providing and fixing multipurpose lock of Godrej/Plaza or equivalent make of approved brand and manufacturer to drawer of cub board with steel screws including making recess of required size in board and fixing of standard plate having groove meant for receiving locks lever in locked position etc complete as per direction of Engineer-in-Charge

Providing and fixing auto closing spring loaded hinges of Hettich/Ebco or equivalent make of approved brand to cupboard shutters with steel screws including making necessary recess in panel board and finished etc complete as per direction of Engineer-in-Charge

Providing and fixing powder coated telescopic drawer channel 405mm long with necessary screw etc complete as per direction of Engineer-in-Charge

Top Storage Unit (Overhead) 900(W)x320(D)x643(H) 2 shutters (glass with M.S frame) The Wall hung storages are made up of CRCA M.S. sheet of 1.0mm thick duly powder coated with the powder coating thickness of 50-60 microns. The storage has openable shutter made of Steel/glass. The shutters are fixed with self closing hinges.

Providing and placing in position Mid back revolving chair, Seat and back made up of 12mm thick hot pressed moulded BWP ply cushioned with 45mm thick moulded foam of density 40-45kg. / upholstered with leatherite/fabric costing not less than Rs. 200-250/ sqm. and one piece PU moulded Fixed arms, Center Tilt mechanism, gas lift mechanism for height adjustment resting on PP base with superior quality five castor wheel pronged with steel strip twin castor wheels etc complete and as per approved sample and as per the direction of Engineer-In-charge. Make- Godrej or eqv

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately): For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides

With float glass panes of 5.50 mm thickness

With float glass panes of 8 mm thickness

Providing and fixing aluminium tubular handle bar 32 mm outer dia,3.0 mm thick & 2100 mm long with SS screws etc complete as per direction of Engineer-in-Charge. Anodized (AC 15 ) aluminium tubular handle bar

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group B

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

2 X 4 sq. mm + 1 X4 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 4 pair

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

4way (4+12 ) Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required

Single pole

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required

15/16 A switch

6 pin 15/16 A socket outlet

Telephone socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required

1 or 2 Module (75mmX75mm)

3 module (100mmx75mm)

8 module (125mmx 125mm)

Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

SITC of wall mounted cabin fan of 400 mm sweep i/c testing and commissioning etc. as reqd. (Bajaj/Khaitan/crompton/usha/ make)

SITC of 36 watt energy efficiency recessed mounted LED luminaries suitable for 2 x 2 grid ceiling of one colors white in combination with profiled and flat diffuser : Lumen Output of 3300 lumens available in 4000 K & 5000 K color temperature constraint current electronic driver complete with all accessories i/c connection with 1.5 sq. mm PVC copper conductor single core cable & earthing etc. as reqd. (Bajaj make model no BCTBLR 39WATN NW / Wipro/Crompton /GE/ Philips/ Twinkle)