Bus Stands Management And Development Authority Tender

TOILET Fixture- Providinf and fixing cost of toilet fitting including internal accessories like WC with cistern , wash basin etc.of standard size (Hind ware/cera make) taps standard (ISI) mark Including internal plubming & pipe fitting complete in all leads & lift and carriage of materials as per the direction of Engieer-in-charge (7 Nos toilets and 7 Nos bath rooms)

Internal electrical; -Wiring light point=90nos, with Copper wires 1.5sqm(Havells/Finolex/Polycab)in pvc conduits Light plug5A=128nos with 1.5SqmCopper pvc wires FRLSH, Power plug15A=12nos.with 4Sqmm Copper wires of FRLSH (Havells/Finolex/Polycab)in pvc conduits, MCB SP 6/32A=42nos. of L&T make, MCB DP 40/63A=5nos of L&T make, Industrial socket 20A, 240V=4nos of L&T/Havells make, Enclosure double door 6way=4nos of L&T/Havells make, Enclosure double door 12way=3nos of L&T/Havells make,Earthing set=2set with charcoal,salt etc. with 6 SWG GI wire=70mtr, Armoured cable 25Sqm(3.5core)=100mtr of Havells/Finolex make,Ceiling fan 1400mm cat A with fan regulator (Crompton/Bajaj make)=16nos.LED Batten20W=43nos. of Havells/Bajaj make,LED Bulk head 9/10W=4nos. of Bajaj make,Batten holder=14nos,Main panel MCCB 100A 4 pole with 4 strip Copper busbar of 100A=1no.,Inverter with intelligent heating 2 Tonne 3star VH vertis elegant(hot/cold) split AC=4nos.,Electric water heater geyser 25L cat A=7nos of Bajaj/Corompton make, Exhaust fan 300mm heavy duty with shutter, The Copper wires of FRLSH(Finolex/Policab) submain for enclosure 10 Sqmm size pvc conductor and earth wires of same size Copper conductor etc as required complete in all respect with satisfaction of Engineer incharge. Note:- All the light point , light plug ,power plug and body of enclosure should be earth of same size copper conductor. .

Hardware & structures- cost of pillars size 72mm x72Smm with base plate 150mm x150mm x8mm- 24 nos, Truss-10nos, purlins-4nos 40mm x80mm- C.L.Z. channels and necessary hardware.complete including all leads & lifts including carriage of materials as per the entire satisfaction of Engieer-in- Charge.

Bunk beds- bunk bed made from MS pipe section 25mm x50mm with 12mm thick ply board on top with necessary screws/nuts &bolts under one lockable daraj in each bed, including cost of foam mattress(4") thick of approved brand ,Pillow with cover,bed Sheet of stanarded size and erection & installation complete. including cost of priming coat and painting etc on steel work .& carriage of materials in all leads and lifts complete as per the entire satisfaction of Engieer-in- Charge

External Sanitary installation:- construction of septic tank size (7.00x6.00x2.40 mts) with soak pit.including cost of excavation in foundation & ,cement concrete 1:1.5:3 (1cement :1.5 sand :3 graded stone aggreegate of 20mm nominal size) in walls,slab up to required thickness including cost of form work as directed by Engineer-in- charge complete in all leads & lifts &soak pits of required size including making connection & accessories like pipe,bends, Man holes cover etc i/c carriage in all leads and lifts complete as per the entire satisfaction of Engieer-in- Charge