Border Security Force Tender

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately).

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. In cement mortar

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board.

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B .Fixing with adjustable lugs with split end tail to each jamb.

Providing and fixing 1 mm thick forster glass film on glass of aluminium doors/windows etc. all complete as per direction by Engineer-in charge.

Providing and fixing Gypsum plain board 12.5 mm thick single skin tapered edged gypsum board including jointing compound, jointing tape,angle beads with suitable screws etc. for Gypsum plain board in walls (frame work to be paid separately) : Gypsum plain board conforming to IS: 2095 (Part -1) : 2011 (Board with BIS certification marks) 12.5 mm thick

Providing and fixing ISI marked stainless steel handles conforming to IS:4992 with necessary screws etc. complete : 125 mm

Providing and fixing ISI marked stainless steel tower bolts conforming to IS:4992 with necessary screws etc. complete : 250x10 mm

Providing and fixing ISI marked stainless steel sliding door bolts conforming to IS:4992 with necessary screws etc. complete : 300x16 mm

Providing and fixing ISI marked stainless steel door stoper conforming to IS:4992 with necessary screws etc. complete : 75 mm

Providing and fixing 19 mm thick decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of board. 19 mm thick (Including laminated and all fittings etc.) including ISI marked nickel plated bright finished M.S. Piano hings IS : 3818 marked with necessary screws

Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in Wall etc. complete (frame work to be paid seperatately). 8 mm thick Cement fiber board as per IS: 14862

Providing and Fixing compactor mobile storage single way unit made of body shelf side top bottom 22 gauge track moving system stopper and mechanism ms cre sheet duly powder coating placing three different places. Single face movable H2080xD457xW915mm

Providing & Fixing compactor mobile storage two way unit made of body shelf side top bottom 22 gauge track moving system stopper and mechanism ms cre sheet duly powder coating placing three different places. Double face movable H2080xD762xW915

Providing & Fixing compactor mobile storage single way unit made of body shelf side top bottom 22 gauge track moving system stopper and mechanism ms cre sheet duly powder coating placing three different places. Single face fix H2080xD381xW915mm

Cleaning of floor/ wall tiles or glass etc by using T16 Roff Cera Clean or approved quality all complete as per direction of Engineer-in-charge.

Providing and fixing number plate stainless steel (SS) with font color black or golden of size 150x100 mm to 250x100 mm with necessary screws etc. all complete as direction by engineer-in-charge.

Re-fixing of existing MS grill partition with all fittings with necessary screws all complete as direction by engineer-in-charge.

Providing and fixing of Angular Modular Work Stations with Single Seater RectangularCluster Powder coated CRCA hollow system Gable end made of prelaminated particle board Prelaminated particle board Grade I type IIconforming to IS 12823/Latest Fabric upholstered with Foam and Prelaminatedparticle board Prelaminated particle board divider Length of table top (main frame) ±10 mm 1220 mm Depth of table top ± 10mm 600 mm Height of table top ±10mm 750 mm Thickness of table top ±2mm 25 mm Overall height of work station partition ±10mm 1200 mm Thickness of side partition/panel ±2mm 45 mm Thickness of main frame ±2 mm 45 mm. Type of keyboard tray With mouse tray Material of keyboard tray Prelaminated particle board Material thickness of keyboard tray 18 mm Type of keyboard tray channel Telescopic channel Length of keyboard channel ±l0mm 200 mm Keyboard front width±10mm 450 mm. Total Number of drawers /storage in Pedestal units Three drawers Locking system of pedestal Center locking Complete body facia and drawer material in PedestalUnit Three layers of Prelaminated particle board(WoodProduct) of grade II type II of IS 12823/Latest. Back Panel Thickness in Pedestal Unit 13 mm Pedestal outer fi nish Laminate in color with swede fi nish 0.6 - 0.8 mmthickness of type S, F or P having index no.3.2.3conforming to IS 2046/Latest with havingbalancing laminate of 0.5 mm thick on anotherside etc. all complete as per direction of engineer-in - charge.