Bharat Heavy Electricals Limited Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Bharat Heavy Electricals Limited - BHEL Tender
Metals and Non-Metals
Eprocure
Opening Date16 Dec 2024
Closing Date2 Jan 2025
Tender AmountRefer Documents
Costs
EMD
0Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_BHEL_43015_1Bid Award Id
ViewTender No
2024Q4STEELPLTSHT Tender for finalization of FA for Q4 FY 2024-25 for Steel - Plates and SheetsTender Authority
Bharat Heavy Electricals Limited ViewPurchaser Address
-Website
http://https://bpl.bhel.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
CR sheet 1.6 mm IS 513 CR2 - D KLD;Thk.:1.6; Width:900 ≤ W ≤ 1250;L = 2500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
450
-
-
... More
1.6 MM X 1250 MM X 2500 MM CRC STEEL SHEETS ANNEALED TO SPECIFICATION AA 10115 REV-09 (IS 513 CR2 D KLD);Thk.:1.6; Width:W=1250;L=2500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
HR Sheets 1.6 mm IS 1079 Gr.HR2 SK/K;Thk.:1.6; Width:900 ≤ W ≤ 1250;L = 2500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
230
-
-
... More
HR Sheet 2 mm IS 5986 Gr 205;Thk.:2; Width:900 ≤ W ≤ 1250;L = 2500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
640
-
-
... More
CR sheet 2.0 mm IS 513 CR2 - D KLD;Thk.:2; Width:900 ≤ W ≤ 1250;L = 2500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
100
-
-
... More
CR sheet 2.0 mm IS 513 CR2 -D KLD;Thk.:2; Width:1250;2500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
40
-
-
... More
HR Sheets 2 mm IS 1079 Gr.HR1 SK/K;Thk.:2; Width:900 ≤ W ≤ 1250;L = 2500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
HR Sheets 2 mm IS 1079 Gr.HR2 SK/K;Thk.:2; Width:900 ≤ W ≤ 1250;L = 2500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
HR Sheet 2.5 mm IS 5986 Gr 205;Thk.:2.5; Width:900 ≤ W ≤ 1250;L = 2500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
HR Sheets 2.5 mm IS 1079 Gr.HR2 SK/K;Thk.:2.5; Width:900 ≤ W ≤ 1250;L = 2500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
150
-
-
... More
3.0 MM X 1250 MM X 2500 MM CRC STEEL SHEETS ANNEALED TO SPECIFICATION AA 10115 REV-09 (IS 513 CR2 D KLD);Thk.:3; Width:W=1250;L=2500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
HR Sheet 3.15 mm IS 5986 Gr 205;Thk.:3.15; Width:900 ≤ W ≤ 1250;L = 2500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
330
-
-
... More
HR Sheets 3.15 mm IS 1079 Gr.HR1 SK/K;Thk.:3.15; Width:900 ≤ W ≤ 1250;L = 2500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
180
-
-
... More
HR Sheets 3.15 mm IS 1079 Gr.HR2 SK/K;Thk.:3.15; Width:900 ≤ W ≤ 1250;L = 2500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
350
-
-
... More
HR Sheet 4.0mm IS 5986 Gr 205;Thk.:4; Width:900 ≤ W ≤ 1250;L = 2500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
100
-
-
... More
HR Sheets 4 mm IS 1079 Gr.HR1 SK/K;Thk.:4; Width:900 ≤ W ≤ 1250;L = 2500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
HR Sheets 4 mm IS 1079 Gr.HR2 SK/K;Thk.:4; Width:900 ≤ W ≤ 1250;L = 2500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
80
-
-
... More
Pl 5 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:5; Width:1500 ≤ W ≤ 1800;L ≤ 6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
190
-
-
... More
Pl 5 mm IS 2062 E 250 Gr A/BR/SK/K; TDC 301;Thk.:5; Width:W ≤ 1250;L ≤ 6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
Pl 5 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:5; Width:1500 ≤ W ≤ 1800;L ≤ 6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
1300
-
-
... More
CQ Pl 5 mm IS 3502;Thk.:5; Width:900 ≤ W ≤ 1250;L ≤ 6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
330
-
-
... More
Pl 6 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:6; Width:1500 ≤ W ≤ 1800;L ≤ 6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
250
-
-
... More
Pl 6 mm IS 2062 E 250 Gr A/BR/SK/K; TDC 301;Thk.:6; Width:W ≤ 1250;L ≤ 6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
80
-
-
... More
Pl 6 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:6; Width:1500 ≤ W ≤ 1800;L ≤ 6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
4000
-
-
... More
Pl 6 mm IS 2062 E250Br/K TDC:6:386, width 2000mm, length 6300mm;Thk.:6; Width:2000;6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
40
-
-
... More
CQ Pl 6 mm IS 3502;Thk.:6; Width:900 ≤ W ≤ 1250;L ≤ 6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
930
-
-
... More
PL 6 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1);Thk.:6; Width:1500;6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
Pl 7 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:7; Width:1500 ≤ W ≤ 1800;L ≤ 6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
100
-
-
... More
Pl 7 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:7; Width:1500 ≤ W ≤ 1800;6300 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
200
-
-
... More
Pl 7 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:7; Width:1500 ≤ W ≤ 1800;L ≤ 6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
200
-
-
... More
Pl 8 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:8; Width:1500 ≤ W ≤ 1800;6300 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
180
-
-
... More
Pl 8 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:8; Width:2000 ≤ W ≤ 2500;6300 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
70
-
-
... More
Pl 8 mm IS 2062 E 250 Gr A/BR/SK/K; TDC 301 ;Thk.:8; Width:W ≤ 1250;L ≤ 6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
40
-
-
... More
Pl 8 mm IS 2062 E 250 Gr A/BR/SK/K TDC:301 Rev 12;Thk.:8; Width:2500;L= 6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
60
-
-
... More
Pl 8 mm IS2062 E350 Gr BR TDC 301 Rev 12;Thk.:8; Width:1500 ≤ W ≤ 1800;6300 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
Pl 8 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:8; Width:1500 ≤ W ≤ 1800;6300 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
3890
-
-
... More
Pl 8 mm IS2062 E250 GrBR/K TDC:6:386 Rev 03;Thk.:8; Width:W= 2500;8000 ≤ L ≤ 10000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
300
-
-
... More
Pl 8 mm IS 2062 E250Br/K TDC:6:386, width 2000mm, length 6300mm;Thk.:8; Width:2000;6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
630
-
-
... More
Pl 8 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:8; Width:2900;10000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
1000
-
-
... More
CQ Pl 8 mm IS 3502;Thk.:8; Width:900 ≤ W ≤1250;L ≤ 6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
210
-
-
... More
Pl 8 mm IS 2062 E250Br/K TDC:6:386,;Thk.:8; Width:2500;12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
80
-
-
... More
PL 8 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403);Thk.:8; Width:2500;6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
Pl 10 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:10; Width:2000 ≤ W ≤ 2500;6300 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
210
-
-
... More
Pl 10 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:10; Width:W= 2500;10000 ≤ L ≤ 12500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
340
-
-
... More
Pl 10 mm IS 2062 E 250 Gr A/BR/SK/K TDC:301 Rev 12;Thk.:10; Width:2500;L= 6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
150
-
-
... More
Pl 10 mm IS 2062 E 250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:10; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
450
-
-
... More
Pl 10 mm IS2062 E250 Gr BR/SK/K TDC 301 + UST as per ASTM A578 Level B, width 2500 mm, length 10000 mm;Thk.:10; Width:W = 2500;L = 10000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
Pl 10 mm IS 2062 E250Br/K TDC 301 , width 2000mm, length 12000 mm;Thk.:10; Width:2000;12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
100
-
-
... More
Pl 10 mm IS 2062 E250Br/K TDC 301 , width 2400mm, length 11100 mm;Thk.:10; Width:2400;11100;dimensions Thickness (T) x Width (W) x Length (L) are in mm
220
-
-
... More
Pl 10 mm IS 2062 E250Br/K TDC 301 , width 2400mm, length 12000 mm;Thk.:10; Width:2400;12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
PLATE-10 IS2062 E250BR; TDC:301 Rev 12;Thk.:10; Width:2000;10000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
Pl 10 mm IS2062 E250 Gr BR/K TDC 301 + UST as per ASTM A578 Level B, width 3200 mm, length 8000 mm;Thk.:10; Width:W = 3200;L = 8000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
60
-
-
... More
Pl 10 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:10; Width:1500 ≤ W ≤ 1800;6300 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
840
-
-
... More
Pl 10 mm IS2062 E250 GrBR/K TDC:6:386 Rev 03;Thk.:10; Width:W= 2500;8000 ≤ L ≤ 10000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
720
-
-
... More
Pl 10 mm IS 2062 E 250 Gr BR/K TDC:6:386 Rev 03;Thk.:10; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
Pl 10 mm IS 2062 E250Br/K TDC:6:386, width 2000mm, length 6300mm;Thk.:10; Width:2000;6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
Pl 10 mm IS 2062 E250Br/K TDC:6:386, width 2000mm, length 12000mm;Thk.:10; Width:2000;12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
390
-
-
... More
Pl 10 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 10000mm;Thk.:10; Width:2500;10000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
320
-
-
... More
Pl 10 mm IS 2062 E 350 Gr B0 TDC:6:386 Rev 03;Thk.:10; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
290
-
-
... More
PLATE 10mm IS2062 E350B0 TDC:6:386 Rev 03;Thk.:10; Width:2500;12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
710
-
-
... More
PL 10 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403);Thk.:10; Width:2500;6300 ≤ L ≤ 10500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
90
-
-
... More
Pl 12 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:12; Width:2000 ≤ W ≤ 2500;6300 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
270
-
-
... More
Pl 12 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:12; Width:W= 2500;1000 ≤ L ≤ 12500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
120
-
-
... More
Pl 12 mm IS 2062 E 250 Gr A/BR/SK/K TDC:301 Rev 12;Thk.:12; Width:2500;L= 6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
60
-
-
... More
Pl 12 mm IS 2062 E250Br/K TDC 301 , width 2200mm, length 7320 mm;Thk.:12; Width:2200;7320;dimensions Thickness (T) x Width (W) x Length (L) are in mm
600
-
-
... More
Pl 12 mm IS2062 E250 Gr BR/K TDC 301 + UST as per ASTM A578 Level B, width 4000 mm, length 10000 mm;Thk.:12; Width:W = 4000;L = 10000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
200
-
-
... More
PI 12 mm IS2062 E350 Gr BR TDC 301 Rev 12;Thk.:12; Width:1500 ≤ W ≤ 1800;6300 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
Pl 12 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:12; Width:1500 ≤ W ≤ 1800;6300 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
500
-
-
... More
Pl 12 mm IS 2062 E 250 Gr BR/K TDC:6:386 Rev 03;Thk.:12; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
500
-
-
... More
Pl 12 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 12000mm;Thk.:12; Width:2500;12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
450
-
-
... More
Pl 12 mm IS 2062 E 350 Gr B0 TDC:6:386 Rev 03;Thk.:12; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
830
-
-
... More
Pl 12 mm IS 2062 E 250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:12; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
1310
-
-
... More
Pl 12 mm IS 2062 E250Br/K TDC:6:386, width 2000mm, length 6300mm;Thk.:12; Width:2000;6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
40
-
-
... More
PL 12 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403);Thk.:12; Width:2500;6000 L 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
PL 12MM A516 GR. 70; TDC: AA10403 REV 01 + SUPPLEMENTRY RQUIREMENTS: IMPACT TEST (S5 + SL. NO. 1 & 2 OF ANNEXURE- 1)+BEND TEST (SL. NO. 5 OF ANNEXURE-1) .;Thk.:12; Width:3000;8000 L 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
40
-
-
... More
PL 12 MM A515 GRADE-70; TDC: AA10404;Thk.:12; Width:2000≤ W ≤2500;8000 ≤ L ≤12500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
PL 12 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403);Thk.:12; Width:2500;6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
Pl 12.7 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:12.7; Width:3750;5850;dimensions Thickness (T) x Width (W) x Length (L) are in mm
160
-
-
... More
Pl 14 mm IS 2062 E 250 Gr BR/K TDC:6:386 Rev 03;Thk.:14; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
90
-
-
... More
Pl 14 mm IS 2062 E 350 Gr B0 TDC:6:386 Rev 03;Thk.:14; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
40
-
-
... More
PL 14 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403);Thk.:14; Width:2500;6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
70
-
-
... More
Pl 16 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:16; Width:2500;L= 6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
260
-
-
... More
Pl 16 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:16; Width:2000 ≤ W ≤ 2500;6300 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
80
-
-
... More
Pl 16 mm IS2062 E250 Gr BR/K TDC 301 Rev 12;Thk.:16; Width:2000 ≤ W ≤ 2500;6300 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
90
-
-
... More
Pl 16 mm IS2062 E250 Gr BR/K TDC 301 Rev 12;Thk.:16; Width:W= 2500;10000 ≤ L ≤ 12500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
560
-
-
... More
PLATE-16 IS2062 E250BR TDC:301 Rev 12;Thk.:16; Width:2500;12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
Pl 16 mm IS 2062 E 350 Gr BR/K TDC 301 Rev 12;Thk.:16; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
80
-
-
... More
Pl 16 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:16; Width:1500 ≤ W ≤ 1800;6300 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
450
-
-
... More
Pl 16 mm IS 2062 E 250 Gr BR/K TDC:6:386 Rev 03;Thk.:16; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
280
-
-
... More
Pl 16 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 12000mm;Thk.:16; Width:2500;12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
1390
-
-
... More
Pl 16 mm IS 2062 E 350 Gr B0 TDC:6:386 Rev 03;Thk.:16; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
2040
-
-
... More
Pl 16 mm IS 2062 E 250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:16; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
320
-
-
... More
PL 16MM A516 GR. 70; TDC: AA10403 REV 01 + SUPPLEMENTRY RQUIREMENTS: IMPACT TEST (S5 + SL. NO. 1 & 2 OF ANNEXURE-1)+BEND TEST (SL. NO. 5 OF ANNEXURE-1) .;Thk.:16; Width:3000;10000 L 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
90
-
-
... More
PL 16 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1);Thk.:16; Width:2500;7500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
100
-
-
... More
PL 16 MM A515 GRADE-70 TDC: AA10404;Thk.:16; Width:2000≤ W ≤2500;8000 ≤ L ≤12500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
PL 16 MM A515 GRADE-70; AA10404;Thk.:16; Width:3000;10000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
90
-
-
... More
PL 16 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403);Thk.:16; Width:2500;6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
250
-
-
... More
PL 16 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1);Thk.:16; Width:2500;6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
Pl 18 mm IS 2062 E 250 Gr BR/K TDC:6:386 Rev 03;Thk.:18; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
40
-
-
... More
PI 18 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03;Thk.:18; Width:2000 ≤ W ≤ 2500;6300 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
360
-
-
... More
PL 18 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403);Thk.:18; Width:2500;6300 ≤ L ≤ 7500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
180
-
-
... More
Pl 20 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:20; Width:2000 ≤ W ≤ 2500;6300 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
Pl 20 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:20; Width:W= 2500;10000 ≤ L ≤ 12500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
1010
-
-
... More
Pl 20 mm IS 2062 E 250 Gr A/BR/SK/K TDC:301 Rev 12;Thk.:20; Width:2500;L= 6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
80
-
-
... More
Pl 20 mm IS2062 E250 Gr A/BR/SK/K TDC 301 + UST as per ASTM A435, width 2500 mm, length 12500 mm;Thk.:20; Width:W= 2500;L = 12500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
100
-
-
... More
PLATE-20 IS2062 E250BR TDC:301 Rev 12;Thk.:20; Width:2500;12650;dimensions Thickness (T) x Width (W) x Length (L) are in mm
750
-
-
... More
PLATE-20 IS2062 E250BR TDC:301 Rev 12;Thk.:20; Width:2500;7925;dimensions Thickness (T) x Width (W) x Length (L) are in mm
130
-
-
... More
PLATE-20 IS2062 E250BR TDC:301 Rev 12;Thk.:20; Width:2500;8875;dimensions Thickness (T) x Width (W) x Length (L) are in mm
90
-
-
... More
PI 20 mm IS2062 E350 Gr BR TDC 301 Rev 12;Thk.:20; Width:2000 ≤ W ≤ 2500;6300 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
90
-
-
... More
Pl 20 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:20; Width:2000 ≤ W ≤ 2500;6300 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
3220
-
-
... More
Pl 20 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:20; Width:2700;12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
100
-
-
... More
Pl 20 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03;Thk.:20; Width:2000 ≤ W ≤ 2500;6300 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
2760
-
-
... More
Pl 20 mm IS2062 E E410 Gr B0/K TDC:6:386;Thk.:20; Width:2500;6300 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
150
-
-
... More
PLATE 20 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12);Thk.:20; Width:2500;8000 ≤ L ≤ 10000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
PL 20 MM A515 GRADE-70; TDC: AA10404;Thk.:20; Width:2000≤ W ≤2500;8000 ≤ L ≤12500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
PL 20 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403);Thk.:20; Width:2500;6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
PL 22 MM IS2062 E350 Gr.B0 TDC 386;Thk.:22; Width:2500;12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
160
-
-
... More
PL 22 MM A515 GRADE-70; TDC: AA10404;Thk.:22; Width:2000≤ W ≤2500;8000 ≤ L ≤12500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
70
-
-
... More
PL 22 MM A515 GRADE-70; TDC: AA10404;Thk.:22; Width:3000;10000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
150
-
-
... More
Pl 25 mm IS2062 E250 Gr A/BR/SK/K TDC:6:386 Rev 03;Thk.:25; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 10000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
80
-
-
... More
Pl 25 mm IS 2062 E 250 Gr A/BR/SK/K TDC:301 Rev 12;Thk.:25; Width:2500;L= 6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
Pl 25 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:25; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
310
-
-
... More
Pl 25 mm IS2062 E250 Gr BR/K TDC 301 Rev 12;Thk.:25; Width:W= 2500;10000 ≤ L ≤ 12500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
200
-
-
... More
Pl 25 mm IS2062 E250 Gr BR/K TDC 301 Rev 12 + UST as per ASTM A435;Thk.:25; Width:2500;8000 L 12500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
200
-
-
... More
PI 25 mm IS2062 E350 Gr BR TDC 301 Rev 12;Thk.:25; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
Pl 25 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:25; Width:W= 3200;L= 8000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
100
-
-
... More
HR PLATE 25X2800X12000-IS 2062 GR.B; TDC:6:386;Thk.:25; Width:2800;12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
100
-
-
... More
Pl 25 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:25; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
1350
-
-
... More
PI 25 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03;Thk.:25; Width:1500 ≤ W ≤ 1800;6300 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
200
-
-
... More
PI 25 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03;Thk.:25; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
1610
-
-
... More
PI 25 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03;Thk.:25; Width:W= 2500;L= 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
1090
-
-
... More
PI 25 mm IS2062E E410 Gr B0/K TDC:6:386;Thk.:25; Width:2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
150
-
-
... More
PL 25 MM SA515 GRADE-70 AA10404-05 + Supplementary requirements: Charpy-V-test (longitudinal / transverse sample) shall be performed getting values of KV 27 J at -20°C or KV 34 J at 0°C or KV 40 J at 20°C “.;Thk.:25; Width:3100;6700;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
PL 25 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403);Thk.:25; Width:2500;6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
80
-
-
... More
Pl 28 mm IS2062 E250 Gr A/BR/SK/K TDC:6:386 Rev 03;Thk.:28; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 10000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
200
-
-
... More
Pl 28 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:28; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
Pl 28 mm IS2062 E250 Gr BR/K TDC 301 + UST as per ASTM A435, width 4000 mm, length 12500 mm;Thk.:28; Width:W = 4000;L = 12500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
120
-
-
... More
Pl 28 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:28; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
430
-
-
... More
Pl 28 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03;Thk.:28; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
250
-
-
... More
Pl 28 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03;Thk.:28; Width:W= 2500;L= 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
670
-
-
... More
Pl 28 mm IS2062 E E410 Gr B0/K TDC:6:386;Thk.:28; Width:2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
100
-
-
... More
PL 28 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403);Thk.:28; Width:2500;8000 L 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
90
-
-
... More
Pl 30 mm IS2062 E250 Gr BR/K TDC 301 Rev 12 + UST as per ASTM A435;Thk.:30; Width:2500;8000 L 12500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
PI 30 mm IS2062 E250 GR BR TDC:6:386 Rev 03;Thk.:30; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
250
-
-
... More
PL 30 MM IS2062 E350 Gr.B0 TDC 386;Thk.:30; Width:2500;12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
360
-
-
... More
PL 30 MM SA515 GRADE-70 AA10404-05 + Supplementary requirements: Impact test at room temperature+orientation of the test specimen in longitudinal direction(S5);Thk.:30; Width:4000;6750;dimensions Thickness (T) x Width (W) x Length (L) are in mm
70
-
-
... More
Pl 32 mm IS2062 E250 Gr A/BR/SK/K TDC:6:386 Rev 03;Thk.:32; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 10000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
80
-
-
... More
Pl 32 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:32; Width:W= 2500;10000 ≤ L ≤ 12500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
500
-
-
... More
Pl 32 mm IS 2062 E 250 Gr A/BR/SK/K TDC:301 Rev 12;Thk.:32; Width:2500;L= 6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
40
-
-
... More
Pl 32 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:32; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
130
-
-
... More
PLATE-32 IS2062 E250BR TDC:301 Rev 12;Thk.:32; Width:2500;12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
Pl 32 mm IS2062 E250 Gr BR/K TDC 301 Rev 12 + UST as per ASTM A435,width 2500 mm, length 12500 mm;Thk.:32; Width:W = 2500;L = 12500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
300
-
-
... More
Pl 32 mm IS 2062 E350Br TDC 301 , width 2200 mm, length 12000 mm;Thk.:32; Width:2200;12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
670
-
-
... More
Pl 32 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:32; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
870
-
-
... More
PI 32 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03;Thk.:32; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
1650
-
-
... More
PI 32 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03;Thk.:32; Width:W= 2500;L= 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
520
-
-
... More
PI 32 mm IS2062 E E410 Gr B0/K TDC:6:386;Thk.:32; Width:2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
160
-
-
... More
PL 32 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403);Thk.:32; Width:2500;6300 ≤ L ≤ 10500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
350
-
-
... More
Pl 34 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03;Thk.:34; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
600
-
-
... More
PLATE 35 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12);Thk.:35; Width:2500;8000 ≤ L ≤ 10000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
PLATE 35.0 MM - A515GR70 + IBR requirement; TDC: AA10404;Thk.:35; Width:1000-2500;5000 ≤ L ≤ 10000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
Pl 36 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:36; Width:W= 2500;10000 ≤ L ≤ 12500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
60
-
-
... More
Pl 36 mm IS2062 E250 Gr BR/K TDC 301 Rev 12 + UST as per ASTM A435,width 3400 mm, length 7000 mm;Thk.:36; Width:W = 3400;L = 7000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
60
-
-
... More
Pl 36 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:36; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
540
-
-
... More
Pl 36 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:36; Width:4500;8500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
Pl 36 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03;Thk.:36; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
1210
-
-
... More
Pl 36 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03;Thk.:36; Width:W= 2500;L= 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
510
-
-
... More
Pl 36 mm IS2062 E E410 Gr B0/K TDC:6:386;Thk.:36; Width:2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
200
-
-
... More
PL 36 MM SA515 GRADE-70 AA10404-05 + Supplementary requirements: Charpy-V-test (longitudinal / transverse sample) shall be performed getting values of KV 27 J at -20°C or KV 34 J at 0°C or KV 40 J at 20°C “.;Thk.:36; Width:3100;6700;dimensions Thickness (T) x Width (W) x Length (L) are in mm
40
-
-
... More
PL 36 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403);Thk.:36; Width:2500;6300 ≤ L ≤ 7500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
160
-
-
... More
Pl 38 mm IS 2062 E350B0 TDC:6:386, width 2000 - 2500 mm, length 8000- 12000 mm;Thk.:38; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
400
-
-
... More
Pl 40 mm IS2062 E250 Gr A/BR/SK/K TDC:6:386 Rev 03;Thk.:40; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 10000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
Pl 40 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:40; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
1510
-
-
... More
Pl 40 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:40; Width:W=3200;L=6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
200
-
-
... More
PI 40 mm IS2062 E350 Gr BR TDC 301 Rev 12;Thk.:40; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
80
-
-
... More
Pl 40 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:40; Width:W= 3800;L= 5700;dimensions Thickness (T) x Width (W) x Length (L) are in mm
60
-
-
... More
Pl 40 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:40; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
1320
-
-
... More
Pl 40 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03;Thk.:40; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
1550
-
-
... More
Pl 40 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03;Thk.:40; Width:W= 2500;L= 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
520
-
-
... More
Pl 40 mm IS2062 E E410 Gr B0/K TDC:6:386;Thk.:40; Width:2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
280
-
-
... More
PL 40 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1);Thk.:40; Width:2500;6000 L 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
40
-
-
... More
PL 40 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403);Thk.:40; Width:2500;6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
80
-
-
... More
PL 40 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1);Thk.:40; Width:2500;8400;dimensions Thickness (T) x Width (W) x Length (L) are in mm
40
-
-
... More
PL 40 MM SA515 GRADE-70; TDC: AA10404-05 + Supplementary requirements: Impact test at room temperature+orientation of the test specimen in longitudinal direction(S5);Thk.:40; Width:2500;8000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
Pl 45 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:45; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
400
-
-
... More
Pl 45 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:45; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
80
-
-
... More
Pl 45 mm IS 2062 E350B0 TDC:6:386, width 2000 - 2500 mm, length 8000- 12000 mm;Thk.:45; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
330
-
-
... More
Pl 45 mm IS 2062 E350B0 TDC:6:386, width 2500mm, length 12000mm;Thk.:45; Width:2500;12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
560
-
-
... More
Pl 45 mm IS 2062 E E410 Gr B0/K TDC:6:386;Thk.:45; Width:2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
230
-
-
... More
PL 45 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403);Thk.:45; Width:2500;6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
PLATE 45.0 MM - A515GR70 + IBR requirement; TDC: AA10404;Thk.:45; Width:1000-2500;5000 ≤ L ≤ 10000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
40
-
-
... More
Pl 50 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:50; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
Pl 50 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:50; Width:W= 2500;10000 ≤ L ≤ 12500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
1100
-
-
... More
PI 50 mm IS2062 E350 Gr BR TDC 301 Rev 12;Thk.:50; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
Pl 50 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:50; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
440
-
-
... More
Pl 50 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:50; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
100
-
-
... More
Pl 50 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 12000mm;Thk.:50; Width:2500;12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
190
-
-
... More
PI 50 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03;Thk.:50; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
2400
-
-
... More
Pl 50 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03;Thk.:50; Width:W= 2500;L= 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
460
-
-
... More
Pl 50 mm IS 2062 E E410 Gr B0/K; TDC:6:386;Thk.:50; Width:2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
300
-
-
... More
Pl 50 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:50; Width:3000;12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
80
-
-
... More
PL 50 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1);Thk.:50; Width:2500;6000 L 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
80
-
-
... More
PL 50 MM A515 GRADE-70; TDC: AA10404;Thk.:50; Width:2000≤ W ≤2500;8000 ≤ L ≤12500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
PL 55 MM IS2062 E350 Gr.B0 TDC 386;Thk.:55; Width:2500;12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
820
-
-
... More
Pl 56 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:56; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
90
-
-
... More
Pl 56 mm IS2062 E250 Gr BR/K TDC 301, width 2500mm, length 8000mm;Thk.:56; Width:W=2500;L =8000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
500
-
-
... More
PLATE-56 IS2062 E250BR TDC:301 Rev 12;Thk.:56; Width:2500;12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
270
-
-
... More
PI 56 mm IS2062 E350 Gr BR/K TDC 301 Rev 12;Thk.:56; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
100
-
-
... More
PI 56 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:56; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
190
-
-
... More
PI 56 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:56; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
150
-
-
... More
Pl 56 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:56; Width:W= 2500;7500 ≤ L ≤ 9300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
Pl 56 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:56; Width:2500;12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
PI 56 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03;Thk.:56; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
70
-
-
... More
Pl 56 mm IS 2062 E350B0 TDC:6:386, width 2500mm, length 12000mm;Thk.:56; Width:2500;12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
130
-
-
... More
Pl 56 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:56; Width:2800;9000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
100
-
-
... More
PL 56 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403);Thk.:56; Width:2500;6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
60
-
-
... More
PI 60 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:60; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
PL 60 MM IS2062 E350 Gr.B0 TDC 386;Thk.:60; Width:2500;12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
920
-
-
... More
Pl 63 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:63; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
600
-
-
... More
Pl 63 mm IS2062 E250 Gr BR/K TDC 301, width 2500mm, length 8000mm;Thk.:63; Width:W=2500;L =8000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
200
-
-
... More
Pl 63 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:63; Width:W= 2000;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
150
-
-
... More
Pl 63 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:63; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
110
-
-
... More
Pl 63 mm IS 2062 E350B0 TDC:6:386, width 2500mm, length 12000mm;Thk.:63; Width:2500;12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
240
-
-
... More
PL 63 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403);Thk.:63; Width:2500-3000;6300 ≤ L ≤ 7500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
600
-
-
... More
PLATE 63.0 MM - A515GR70 + IBR requirement; TDC: AA10404;Thk.:63; Width:1000-2500;3000 ≤ L ≤ 10000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
PL 63 MM SA515 GRADE-70 AA10404-05 + Supplementary requirements: Impact test at room temperature+orientation of the test specimen in longitudinal direction(S5);Thk.:63; Width:3600;7800;dimensions Thickness (T) x Width (W) x Length (L) are in mm
200
-
-
... More
Pl 70 mm IS 2062 E 250 Gr A/BR/SK/K; TDC:301;Thk.:70; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
130
-
-
... More
Pl 70 mm IS 2062 E 250 Gr BR/K TDC 301, width 2500mm, length 8000mm;Thk.:70; Width:W=2500;L =8000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
100
-
-
... More
Pl 70 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:70; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
60
-
-
... More
PL 70 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403);Thk.:70; Width:2500;6300 ≤ L ≤ 7600;dimensions Thickness (T) x Width (W) x Length (L) are in mm
80
-
-
... More
PL 70 MM SA515 GRADE-70 AA10404-05 + Supplementary requirements: Impact test at room temperature+orientation of the test specimen in longitudinal direction(S5);Thk.:70; Width:2500;8000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
60
-
-
... More
Pl 75 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:75; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
200
-
-
... More
Pl 75 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:75; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
120
-
-
... More
PI 80 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;Thk.:80; Width:W= 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
730
-
-
... More
Pl 80 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:80; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
PL 80 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403);Thk.:80; Width:2500;6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
450
-
-
... More
Pl 90 mm IS 2062 E 250 Gr A/BR/SK/K; TDC:301;Thk.:90; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
180
-
-
... More
Pl 90 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:90; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
100
-
-
... More
PL 90 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403);Thk.:90; Width:2500-3000;6300 ≤ L ≤ 7500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
250
-
-
... More
PL 95 mm. IS 2062 E250 Gr. BR; TDC 301;Thk.:95; Width:2500;6000 L 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
120
-
-
... More
Pl 100 mm IS 2062 E 250 Gr A/BR/SK/K; TDC:301;Thk.:100; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
150
-
-
... More
PL 100 MM IS2062 E250 Gr.BR TDC 301 Rev 12;Thk.:100; Width:2400;12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
110
-
-
... More
PL 100 MM IS2062 E250 Gr.BR TDC 301 Rev 12;Thk.:100; Width:2600;10500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
80
-
-
... More
Pl 100 mm IS 2062 E250 Gr BR; TDC 301;Thk.:100; Width:2500;6000 L 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
PI 100 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:100; Width:W= 4400;L= 4600;dimensions Thickness (T) x Width (W) x Length (L) are in mm
150
-
-
... More
Pl 100 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:100; Width:W= 2500;L= 8000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
240
-
-
... More
PL 100 MM IS2062 E250 Gr.BR TDC:6:386/REV:03;Thk.:100; Width:2600;10600;dimensions Thickness (T) x Width (W) x Length (L) are in mm
30
-
-
... More
PL 100 MM IS2062 E250 Gr.BR TDC:6:386/REV:03;Thk.:100; Width:2400;12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
PL 100 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403);Thk.:100; Width:2500;6300;dimensions Thickness (T) x Width (W) x Length (L) are in mm
70
-
-
... More
PL 100 MM SA515 GRADE-70 AA10404-05 + Supplementary requirements: Impact test at room temperature+orientation of the test specimen in longitudinal direction(S5);Thk.:100; Width:2200;4800;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
Pl 110 mm IS 2062 E 250 Gr A/BR/SK/K; TDC:301;Thk.:110; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
60
-
-
... More
Pl 110 mm IS 2062 E 350 Br. TDC 301 Rev 12;Thk.:110; Width:2500;6300≤ L ≤12600;dimensions Thickness (T) x Width (W) x Length (L) are in mm
100
-
-
... More
Pl 110 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:110; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
110
-
-
... More
PL 110 MM SA515 GRADE-70 AA10404-05 + Supplementary requirements: Impact test at room temperature+orientation of the test specimen in longitudinal direction(S5);Thk.:110; Width:1800≤ W ≤ 2500;5000≤ L ≤ 8000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
40
-
-
... More
PL 110MM SA515 GRADE-70 AA10404-05 + Supplementary requirements: Charpy-V-test (longitudinal / transverse sample) shall be performed getting values of KV 27 J at -20°C or KV 34 J at 0°C or KV 40 J at 20°C .;Thk.:110; Width:1100;8800;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
PL 110MM SA515 GRADE-70 AA10404-05 + Supplementary requirements: Charpy-V-test (longitudinal / transverse sample) shall be performed getting values of KV 27 J at -20°C or KV 34 J at 0°C or KV 40 J at 20°C .;Thk.:110; Width:1650;5000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
PL 115 MM IS2062 E250 Gr.BR TDC 301 Rev 12;Thk.:115; Width:2200;11000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
80
-
-
... More
PL 115 MM IS2062 E250 Gr.BR TDC 301 Rev 12;Thk.:115; Width:2600;8000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
200
-
-
... More
PL 115 MM IS2062 E250 Gr.BR TDC 301 Rev 12;Thk.:115; Width:3000;8700;dimensions Thickness (T) x Width (W) x Length (L) are in mm
150
-
-
... More
PL 115 MM IS2062 E250 Gr.BR TDC:6:386/REV:03;Thk.:115; Width:2800;8500;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
PL 115 MM IS2062 E250 Gr.BR TDC:6:386/REV:03;Thk.:115; Width:2700;8200;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
PL 115 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1);Thk.:115; Width:W = 2500;L = 10000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
190
-
-
... More
Pl 120 mm IS 2062 E 250 Gr A/BR/SK/K; TDC:301;Thk.:120; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
80
-
-
... More
PL 120 MM SA515 GRADE-70 AA10404-05 + Supplementary requirements: Impact test at room temperature+orientation of the test specimen in longitudinal direction(S5);Thk.:120; Width:1500≤ L ≤ 2500;5000≤ L ≤ 8000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
40
-
-
... More
PI 125 mm IS2062 E250 Gr BR TDC 301 Rev 12;UT: ASTM A578 Level A/SA435;Thk.:125; Width:2500;6000-12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
1020
-
-
... More
PI 130 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:130; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
250
-
-
... More
PL 135 MM SA515 GRADE-70 AA10404-05 + Supplementary requirements: Charpy-V-test (longitudinal / transverse sample) shall be performed getting values of KV 27 J at -20°C or KV 34 J at 0°C or KV 40 J at 20°C “.;Thk.:135; Width:2200;6000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
Pl 140 mm IS 2062 E 250 Gr A/BR/SK/K; TDC:301;Thk.:140; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
100
-
-
... More
Pl 140 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12- item length = 5600/8400mm;Thk.:140; Width:W = 2500;L = 8400;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
PL 140 MM SA515 GRADE-70 AA10404-05 + Supplementary requirements: Impact test at room temperature+orientation of the test specimen in longitudinal direction(S5);Thk.:140; Width:2000;6000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
110
-
-
... More
Pl 150 mm IS 2062 E350Br/K TDC 301 with Supplementary Requirement: Charpy V-Notch Impact Test on Longitudinal & Transverse Specimen, width 2400mm, length 8000mm;Thk.:150; Width:2400;8000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
150
-
-
... More
PI 150 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03;Thk.:150; Width:2000 ≤ W ≤ 2500;8000 ≤ L ≤ 12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
130
-
-
... More
Pl 160 mm IS 2062 E250Br TDC 301 , width 2200 - 2500 mm, length 6000 - 12000 mm;Thk.:160; Width:2200-2500;6000-12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
60
-
-
... More
PI 160 mm IS2062 E250 Gr BR TDC 301 Rev 12;ASTM A435;Thk.:160; Width:2500;6000-12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
50
-
-
... More
PL 160 MM SA515 GRADE-70 AA10404-05 + Supplementary requirements: Charpy-V-test (longitudinal / transverse sample) shall be performed getting values of KV 27 J at -20°C or KV 34 J at 0°C or KV 40 J at 20°C “.;Thk.:160; Width:1500;6000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
60
-
-
... More
Pl 200 mm IS 2062 E250Br TDC 301 , width 2200 - 2500 mm, length 6000 - 12000 mm;Thk.:200; Width:2200-2500;6000-12000;dimensions Thickness (T) x Width (W) x Length (L) are in mm
60
-
-
... More
Total
86200
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements