Public Works Department Tender

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift.

Removing and scraping of old deteriorated plaster of any thickness fromm wall I R.C.C member including stacking of serviceable material and disposal of unserviceable from site of work. with all lead and lift.

Providing and laying cement coucrete work 1:1 1/2:3 (1- cement :1 1/2 coarse :3- graded stone aggregate 20mm nominal size) for R.C.C. lintel including finising smooth with curing etc. complete including the cost of formwork but excluding the cost reinforcement for upto floor two level (incl. cost of materials and labours).

Providing TMT Bar FE 500/5000 reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level.

Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows including Indian teak wood frames 10 cm x 7 cm. size including anodized alluminium fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete. (ii) Fully Panelled.

Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows including Indian teak wood frames 10 cm x 7 cm. size including anodized alluminium fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete. (i) Fully Glazed.

Providing and fixing M .S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws. (A) Plain Grill.

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1 :3 (1 cement:3-sand).

Providing and laying Vitrified tiles 8 to 10 mm thick , 24" x 24" in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1 :3 , ( 1-cement 3- coarse sand ) finishing with flush pointing in white cement.

Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement: 3-coarse sand) and jointed with white cement slurry.

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1:1.5 laid over and jointed with grey cement slurry including rubbing and polishing etc. complete. (B) 30mm thick.

Providing a cooking platform of 25mm thick one side polish kota stone sandwich type double kota stone in top and vertical partition having 75cm in hight by using cement mortar (1:3) for sandwiching kota stone vertical partition shall be provided 1 m C/C. Frontage of platform shall be fitted with kota stone strip of 75mm wide. One washing sink of kota stone shall be provided as per required size. All kota stone shall be embedded in side walls and bottom including polishing, cutting and all labour etc. complete.

Providing and laying marble stone slab flooring over 20mm (Average) base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1:1.5 (1-lime putty : 1.5-coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete. (A) Marble slab 25mm thick.

Distempeing (Two coats) with oil bound distemper of approved brand and manufacture and of required shade on wall surfaces to give an even shade, over and including a pnm,ng coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth.

Finishing wall with water proofing cement paint of on wall surfaces (Two coats) to give an approved brand and manufacture and of required shape even shade after thoroughly brushing the surface to remove all dirt and remains of loose oowered materials.

Providing erecting and fixing double coated Syntex PVC. (ISi) water tank of required capacity each with all necessary fittings and connection etc. complete on terrace.

Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (i) 25mm dia.

Providing and fixing Gun metal check or non-return fullway wheel valve.(A) 15mm dia.

Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia.

Providing, laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe (SCH-40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer in Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing, laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe (SCH-40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer in Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm xv 400mm size. (i) In white colour.

Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm (Earthwork, bed concrete, foot reste and trap to be measured and paid for separately) (A) Vitreous China.(I) Long oattern = White colour.

Providing and fixing wash down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-cement : 1- fine sand) ( Seal and cover to be measured and paid for separately) (A) vitreous China Pattern. (i) in white colour.

Providing and fixing 12.5 Litres low level flushing cistern with a Pair, of C.I. or Mild brackets, complete with fittings such as lead valve less siphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enameled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and colset (overflow pipe to be measured and paid for separately ).

Providing and fixing in Cement Mortar 1 :3 (1-Cement 3-coarse sand)a, pair of white vitreous China 250mm x 130mm x 30mm footrest to long pattern squatting Pan water closet.

Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia.

Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 100 mm dia.

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers.

Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap polished bright. (i) 15mm dia.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14 735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH 40) for cold water including fittings make PRINCE I SUPREME I ASTRAL I FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre CIC or shall be cancelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing and fixing M. I. fisher union for washbasin or sink. (A) 32mm dia.

Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. comolete.(ii) 25mm dia.

Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia

Providing and fixing 100mm size P or S trap for water closet squatting pan including jointing the trap with the pan and soil pipe in cement Mortar 1: 1 ( 1- Cement : 1-Fine sand)(A) Vitreous China.

Providing and fixing plastic seat and cover for wash down water closer with C.P. brass hinges and rubber buffers. (B) Black plastic seat and cover.

Providing and fixing 30mm thick FACTORY MADE SOLID BOTH SIDE PRELAM PANEL PVC DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, top and bottom rails. M.S. frame shall have a coat of steel primer of approved makde and manufactures. M.S frame covered with 5mm thick heat moulded prelim PVC 'C' channel of siz 30mm thickness, 70 mm width of which 50mm shall be flat and 20mm shall be tapered in 45 degree Angle on either side forming stiles, and 5mm thick, 95mm wide pream PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side ot form top and bottom rail and 115mm wide prelim PVc sheet out of which 75nmm shall be flat and 20mm shall be tapered on both side to form lock rail, Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick 20mm wide cross PVC sheet shall be provided as gap insert for top rail and bottom rails. Panelling of 5mm thck both side prelim PVC sheet to be fitted in the M.S. frame welded.sealed to the stiles and rails with ?mm (5mm + 2mm) thick x 15mm wide PVC sheet beading on inner side, and joined togeth with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C" chanel using PVC solvent adhesive etc. complete as per direction of Engineering in charge, manufacture's specification and rawing.

Providing and fixing stainless steel (non magnetic) kitchen sink of approved quality fitted with kitchen platform excluding fittings. (A) Size 55 x 45 cm.

Providing and fixing PVC fly proof mesh of approved quality to doors/windows including the cost of all materials like net. Welcrow strips, Stitching and labour charges for fising etc. Complete in all respect.

Carrying out plinth treatment to existing structure by spraying or grouting chemical solution for termite control treatment including drilling hole @ 1m c/c both ways labour and materal consistent with ISI specificatiion.