Public Works Department Tender

Removal of Telephone / Electric Poles and Lines (Removal of telephone / Electric poles including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and up to a all lead and lift and stacking the serviceable and unserviceable material separately)

Demolition RCC Road Work by auto miller machine including stacking of servicable materials and disposal of unserviceable materials with all lead and lift.

Demolition of Brick Work and Stone Masonry including stacking of serviciable material and disposal of unservicable material with all lead and lift (ii) In Cement Mortar

Earthwork in cuting in all sorts of soil and soft murrum including conveying and spreading the stuff, embankment as and where directed from the end of the cutting with all required lead and lift. (A) All types of Soil

Scarifying gravelled macadam or bitumen macadam surface by auto miller machine upto 30 cm.depth including stacking useful materials on road side and disposing off remaining stuff with all lead and lift.

Plant Mix Method (Providing, laying, spreading and compacting 250 mm thk. graded stone aggregate material in sub base course including mixing in a mechanical mix plant at OMC , carriage of mix material, spreading in uniform layers with motor grader for sub base including spreading of stone dust to fill up voids on the surface and watering compacting with vibratory roller to achieve CBR value not less than 30 as per MORTH and the desired density (as per designed mix determined density) including all materials, labour, machinery.etc completed. as per clause 401 ) - Grading II

Providing and Laying 150 mm thick of wet mix macadam of using machine crushed chips as per required gradation mixing with required optimum quantity of water conveting the mix to site and camber with mechanically paver, consolidation with vibratory road rolling including materials. etc completed as directed by Engineer In charge.

Providing and casting in situ C.C. in grade M-15 (porportions as per mixdesign or as per Table 9 of IS456 2000 in masses by weigh batching ) using granite, quartzite trap metal of size 6 mm to 20 mm for RCC work, including scaffolding centering, form work, needle vibrated consolidation, curing comp. up to 6 meter depth or height (excluding cost of reinforcement and neat finishing) with centering and shuttering etc. comp.

Providing and Laying M40 Grade Cement Concrete of approved mix design with avg. Flexural strength of 4.4 Mpa in 3 days from RMC Plant including use of micro silica / alcofine, approved make super plastiser and reader, fibriliated 100% virgin polyprolpylene fibres, fly ash and transported by tranist mixer and placing at work site, compacting, finishing, initial curing by approved curing compound / contractors water and including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, tarring the sides of slab with hot bitumen as specified and as directed (w/c ration 0.28 max.) etc. completed.

Cast in Situ Cement Concrete M20 kerb (Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408) - Using Concrete Batching and Mixing Plant

Supplying and fixing reinforced concrete heavy duty nonpressure pipes with collars for culverts carrying heavy traffic as per IS 458-1991 specifications including setting the pipes in C.M. 1:2 watering and laying (to level or slopes) of class NP3 of following internal daimeters.(ii) 450mm dia. (upto 10 ton)

Supplying and fixing reinforced concrete heavy duty nonpressure pipes with collars for culverts carrying heavy traffic as per IS 458-1991 specifications including setting the pipes in C.M. 1:2 watering and laying (to level or slopes) of class NP3 of following internal daimeters.(iii) 600mm dia. (upto 10 ton)

Manufacture, supply and delivery and laying of RCC Precast chambers of M40 grade with size 600 x 900 mm at top and 1130x900 mm at bottom with 600 mm height (Clear opening 400x700 mm) as per specification and drawing attached with the tender documents for sizes as mentioned below. The rates includes all taxes, loading, carting, unloading, stacking, including octroi etc. complete.

Manufacture, supply and delivery and laying of RCC Precast chambers of M40 grade with size 900 x 1200 x 600mm (Clear opening 700x1000mm) as per specification and drawing attached with the tender documents for sizes as mentioned below. The rates includes all taxes, loading, carting, unloading, stacking, including octroi etc. complete.

Manufacture, supply and delivery and laying of RCC Precast Drain Block of M40 grade with size 600 x 450 x 100mm as per specification and drawing attached with the tender documents for sizes as mentioned below. The rates includes all taxes, loading, carting, unloading, stacking, including octroi etc. complete.

Manufacture, supply and delivery and laying of RCC Precast Manhole Cover of M40 grade with size of 600 x 900mm (100mm thick) as per specification and drawing attached with the tender documents for sizes as mentioned below. The rates includes all taxes, loading, carting, unloading, stacking, including octroi etc. complete.

Manufacture, supply and delivery and laying of RCC Precast Manhole Cover of M40 grade with size of 900 x 1200mm (90mm thick) as per specification and drawing attached with the tender documents for sizes as mentioned below. The rates includes all taxes, loading, carting, unloading, stacking, including octroi etc. complete.

Providing and Laying interlocking cement concrete paver blocks 80mm thick of M40 grade of approved make and shape including leveling the base with 20mm thick cement slury 1:5 , laying the paver blocks in pattern as directed by the EIC, filling the joints with sand including watering, rolling and compacting with appropriate tools and plants, all conveyance including loading, unloading of blocks etc.complete in all respect.

Providing and Laynig interlocking cement concrete Decorative paver blocks 80mm thick of M40 grade of approved make and shape as per attched drawing and approved by client including leveling the base with 20mm thick cement slury 1:5 , laying the paver blocks in pattern as directed by the EIC, filling the joints with sand including watering, rolling and compacting with appropriate tools and plants, all conveyance including loading, unloading of blocks etc.complete in all respect.

R.C.C. M-25: Providing and laying controlled cement M 25 and curing complete, including the cost of from work, vibrating and excluding cost of reinforcement for reinforced concrete work as per the detailed drawing, saffolding etc complte as per instruction of Architect/EIC.

Providing TMTFE 500 D bar reinforcement as per approved make and sample by Architect/EIC for R.C.C. work including bending, binding and placing in position, transportation, octroi, and other taxes etc complete for any level with scaffolding etc complete,

Providing and laying of Hot applied Thermoplastic compound 2.5 mm thick including Reflectorising Glass Beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35 & finished surface to be level, uniform and free from streaks and holes.

Cautionary Warning Sign :-Providing and fixing sing boards made out of 2mm aluminium sheet; size 90 x 90 x 90 cms. equilateral triangle as per design of IRC-67-1977. Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with retro refiectivesheeting as per latest M.O.S.T.Specifications; 3.1m long stand postand frame fabricated from suitable sizeiron angle of 35 x 35 x 3mm, 75 x 75 x 6mm as required; painted with bestquality epoxy coatings in black andwhite bends. The details of symbol foreach board shall be as per theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including excavation, curing etc.complete under the supervision of engineer in charge.(B) High Intensity Grade..................

Regulatory/Mandatory signs :Providing and fixing sing boards made out of 2mm aluminium sheet; size 60cms. diameter circle as per the design of IRC-67-1977 pre treated with phospheting process & acid eteching; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with retro refiective sheeting as per latest M.O.S.T. Specifications; 3.1m long stand post and frame fabricated from suitable size iron angle of 35 x 35 x 3mm 75x75x6mm as required; painted with best quality epoxy coatings in black and white bends. the details of symbol for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including excavation curing etc. complete under the supervision of engineer in charge.(B)High Intensity Grade .....................

Parking Signs :-Providing and fixing sing boards made out of 2mm aluminium sheet; size 60 x 60cms. sequare plus 60 x 20cms rectangular additional plate as as per the design of IRC-67-1977 pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with retro refiective sheeting as per latest M.O.S.T. Specifications; 3.1m long stand post and frame fabricated from suitable size iron angle of 35 x 35 x 3mm 75x75x6mm as required; painted with best quality epoxy coatings in black and white bends. the details of symbol for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including excavation curing etc. complete under the supervision of engineer in charge.(B)High Intensity Grade .....................

Direction sign (Junction board):-Providing and fixing sing boards made out of 2mm aluminium sheet; size 244 x 122cms. rectangle as as per the design of IRC-67-1977 pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with retro refiective sheeting as per latest M.O.S.T. Specifications; Letters and numerals should be as per IRC-30-1968, 3.1m long (2 nos) stand post and frame fabricated from suitable size iron angle of 50 x 50 x 5mm 75x75x6mm as required; painted with best quality epoxy coatings in black and white bends. the details of symbol or inscription / numerals for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including excavation curing etc. complete under the supervision of engineer in charge.(B)High Intensity Grade .....................

Place ideatification sign :-Providing and fixing sing boards made out of 2mm aluminium sheet; size 150 x 90cms. rectangle as as per the design of IRC-67-1977 pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with retro refiective sheeting as per latest M.O.S.T. Specifications; Letters and numerals should be as per IRC-30-1968, 3.1m long (2 nos) stand post and frame fabricated from suitable size iron angle of 50x50x5mm 75x75x6mm as required; painted with best quality epoxy coatings in black and white bends. the details of symbol or inscription / numerals for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including excavation curing etc. complete under the supervision of engineer in charge.(B)High Intensity Grade .....................

Supplying and Fixing Cat Eye (Stimsonite) made out of Acrilo beautile sterine injection high compressed moulding with reflector made out of MMC (Prismatic type size 12cm X 6cm X 2.5cm) provided with the bitumenous adhesive 100g with each unit for fixing (Engineer Grade)

Providing and fixing rubber speed breakers (with polyurethane binder) of size 500mm x 350mm x 50mm lining with 8 no of cat eyes per piece Including intermediate and end members as per manufacturer's specifications or supplier's specifications and as directed by engineer in charge. Weight of speed breaker approximate 15 Kg/Rmt and weight capacity 20 Tons with high impact resistance and brutal weather condition. Speed breaker shall be fixed with grout (min 8 holes for fixing per piece) and as per manufacturer's specification. Sample shall be approved by engineer in charge.

SITC of Bollard of 950 mm overall height with base dia upto 186 mm, base dia must match with streetlight's base part, top dia upto 180 ,shaft dia upto 140 mm manufactured in steel tubular galvanised/casting. Bollard is painted with P.U paint and junction box is flush with the surface. Bollard is suitable for 15 watt lamp fitting and it should operated at 240 V A/C Bollard’s both end 28 meter 6 sq mmx4 core aluminum armored cable placed in 50 mm DWC pipe ,digging 90 cm depth, 150x150x6mm M.S. plate (with anti-corrosive epoxy painted) welded at bottom and embedded 150 mm in cement concrete of M-15 grade including necessary excavation of size 250x250x450 mm deep for the same in all type of strata or pavement like soil / Rock / Concrete / Block pavement/Bituminous pavement at specified spacing as per the instruction of client.,Including Streetlight automatic On-OFF system distance between two bollard is 20 mtr with 2 year free operation and maintenance. As per design & directed by EIC (Make of Schreder, Klite, Surya,Philips, Crompton, Keselec or equivalent make) As per drawing & directed by EIC.

Providing M-20 cement concrete foundation & 70% PCC from bottom including excavation for the pole if size 45x45x100 cms. Deep in below ground level with plinth 45cms x 45cms (or 45cms dia. X 45cms) high upper ground level with necessary curing and finishing in approved manner.

Manufacture, supply and fixing of RCC Precast Tree Pit Cover of M40 grade of size 850 x 850 x 75mm and ID 500mm Two Part as per specification and drawing attached with the tender documents for sizes as mentioned below. The rates includes all taxes, loading, carting, unloading, stacking, including octroi etc. complete as directed by engineer-in-charge.

Construction of Recharge Well of 200mm dia pipe with suitable drilling & gravel packing also PVC casing pipe suiltably required upto depth of 90m with V wire screen and make precast cahmber of M40 grade of recharge well including RWH hydrological survey as per drawing and specification as per directed by EIC

Brick Masonry And Work in Cement Mortar 1:5 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications.

Refixing of Existing Manhole Cover by providing cement mortar 1:3 or as per instruction by EIC.

SITC of 50 watt for urban lighting body made of painted spun aluminium, with following specification ;- The protector grade UV-RESISTANT IK-05 or above , SEALED OPTICAL COMPARTMENT WITH ip 66 PROTECTION, Front cover must be with high efficiency secondary lens, fitting should have a surge protection of 10 kv external and 5 kv internal.Fitting should have power factor 0.95, THD 10%, CRI 70 and input voltage range from luminarie range 140-270 v ac at 50 hz .luminary efficincy 85-95 lm/watt with system lumen greater than 4750 lumen in CCT range upto 5700 K as per ANSI system life of 50000burning hours with 70%of intial lumens maintained. luminarie should suitable for operating temperature from -10-50 ac .Ingress protection of IP 65 ,LED should be LM-80 certified and fitting must LM-79 certified,. Luminarie should be warranted for five years. Preferred make ;- Schreder, Klite, Surya,Philips, Ensave or equivalent make which satisfy above technical specification and having LM_79,LM-80 certification. As per drawing & directed by EIC.

SITC of 6 mtr height decorative pole along with single arm drawing as shown in fig with following specification ;- Pole having cast iron decorative base and pipe dia 140 mm dia till 1 mtr and. Pole shall be mounted on square on base plate decorative bracket with 500 mm overhang mounted on pole pole bracket shall be galvanized and painted with P.U paint.During painting the suitable factors should be maintain so humidity during rainy season can't affect pole paint. casting iron material should be as according to ASTM E415-2015 , analysis of material should show below standard value of Carbon, silicon, maganese, phosphorus ,sulphur, chromium, nickel, molybedenum ,copper,vanadium,CE as per ASTM E415-2015,Pole's wind withstand capacity must be 70 km/hr. and per IS 875. And with necessary 1.5 sq mm x3 core flexible cable fitting to MCB. As per drawing & directed by EIC.

Mains with ISI marked electrolyte stranded copper conductor, Non PVC Zero Halogen free fire retardant insulated copper conductor, insulated wire (HFFR) conforms to IS-694, erected in existing pipe with 1.5sq. mm copper conductor of same specifications for earth continuity of following size. [j] 3 wire 2.5 sq.mm

Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

Cast iron earth pit size 30 x 30 x 0.35 cms. Buried in specially prepared 2.5 mt. deep earth pit complete with necessary GI. Strip in GI pipes 2 mt. long with coupling and GI plug for earthing of switch gear, conduit run or power plug etc.

Supplying,installing,testing & commissioning of Maintenance Free Chemical Earthing System consisting of (C)CopperBonded EarthRodof1.5Mtrx5/8"size using earthenhancing compound of 10 Kg & termination clamp.

Supply Installation Testing and commissioning of 8 gauge GI wire, 50 turns coil type earthing with 3 mtr length

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (d) 4 core 16 Sq. mm

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material at required depth for laying of cable. below ground / road surface for enclosing cable and back filling the same to make ground as per original. (A)50 mm dia

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.(e) 2 to 4 core 16 Sq. mm

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (C) 16 Sq.mm.

Providing , erecting , testing and commissioning Insu Intelligent Streetlight Controller specially design for energy saving in conventional streetlight system ( Cat. No. SLC-03-1Ph-7.5KVA-30Amp) having technial specification ,1 phase 2 wire, 230 V AC/ph +/- 25% R Y B N 2 Wire supply System.50 Hz (+ / - 10 %), 2 W (Stand By) to 4 W (at street light operation)consuption, Advance 8 bit micro controller, switching on longitude and latitude base, accaracy of +/- 1 minute per month. with inbuilt battery, with battery life of more than 8 years, with speicial device which hold the parameter for more then 10 years without any power and password protected. 16 character and two line LCD display with backlight, 4 keys user friendly keyboard system, 7500 VA feeder pillar capacity, 40 Amps Isolator,3 Output with termination,45 Amps 2 Pole contactor, 3 x 16 Amps, with F R cable, provision to by pass by way of relay operation through auto/manual switch, 2 to 55 centigrade and humidity 90 % non condensing, Out door type installation on pole with clamps.(Provided with clamps & nut bolt) or wall or Floor,Three locking system flush type internal panel lock, external pad lock and internal U clamp locking systems for against theft of Panel., having 15 Kg weight, 16/18 Gauge MS weather proof box with industrial exterior powder coated with 7 tank process.

Meter Connection Charge from local power supply authority including issue of test reports.