Public Works Department Tender

Disposing off the excavated stuff of above items for lead of (A) 50 m to 500 m

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

White Stone Bela mesonry block in course in superstructure with stone of approved quality in Cement Mortar 1:5 (1-Cement :5- course sand) including packing the joints etc. complete. Foundation and plinth

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and consolidating etc. complete.

Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in © Slabs ,landing ,shelves ,Balconies, Lintels, Beams, Girders and Cantilever upto floor two level.

Providing formwork of Steel centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (G) Columns PillarsPosts and struts. (1) Square Rectangular Polygonal in plan.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1 cement:3-sand)

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (i)Cement mortar 1:3 (1-cement:3-sand)

Providing and applying exterior texture of approved shed and pattern rates are inclusive of one coat of white cement base putty, two coats of importade Archi Concrete material and asian paint base colour with required coats of asian texture paint rates are including scaffolding, all materials, labours and for any height.

Wall painting (two coats) with plastic emulsion paint With putty two coats and one coat primer of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Providing wood work in frames of doors and Shutters , windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length as per given by consultant rates are inclusive of PU coating wood polish of desire shade and quality rates are inclusive of brass fixtures and fastening as decide by consultant.. (1)First class Ghana teak wood

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for DARK shade

Providing and laying brick tiles over mumty roofs, grouted with cement mortar1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat:

Providing and laying rectified glazed ceramic floor tiles of size 300x300 mm or more , of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except white, ivory, grey, fume red brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing 65mm Thick M-30 vyara paver block of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and laying Leather Finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.(I) Lether Finish Granite

Providing and fixing 100mm x100mm x100mm Granite cobal of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Supplying, Erecting, Testing & Commissioning the(PASSENGER AUTO LIFT 5 Passanger Lift) MACHINE ROOM LESS having following main features: LOAD &SPEED 340 KG@1 M/SEC [1] GEAR LESS LIFT DRIVE comprising of High Starting torque Lift duty 3 phase 440 V A. C. Permanent magnetic synchronous motor of proper rating with high efficiency shall be used.[2] Micro processor based / V.V.V.F.ARD, vector control drive with encoder feedback closed loop system shall be used for lift car and door operation which shall be full collective selective operation hall call demand response, UP/DOWN hall stops, Main, Up/ Down Contactor with overload and phase reversal relay and safety controls. [3] Car with M S platform with bracings of adequate size and to sustain the impact load cabin + passenger with safety factor of fire for steel and side panels of Stainless steel of sheet of grade 304 duty. Car ceiling will be S.S. finishes with aesthetic appearance with LED ceiling lights. Car flooring shall be of anti skid PVC with choice of colour of engineer in charge. Car doors shall be of stainless steel grade 304, hairline finish with centre opening / telescopic automatic doors. Car panel will also be S.S. 304 finished with emergency stop device, mechanical door safety device, facility of auto/ attended mode. All car panel buttons and all floor switches must be with brail language as per lift act. MACHINE drectecly plaed above hoist way.HOIST WAY required 1700mm widex1420mm deep[4] All landing doors shall be fully automatic centre opening/ telescopic opening made of hairline finish steel grade of 304 with key holes and infrared curtains with Unlocking facility from outside. [5] Appropriate battery operated emergency light in the car along with alarm switch shall be provided. [6] Digital scrolling indicator system for up-down arrow along with floor position indicator shall be provided inside the car and at all floors. [7] Full height infra red curtain with multiple criss / crossing light beams shall be provided. [8] Automatic Rescue Device (ARD) shall be provided accordingly of passenger capacity. [9] Audio visual indication in the lift car showing over loading shall be provided such that doors kept open till excess load is removed. [10] Spring buffers/PU Buffers shall be provided. [11] Car fan with automatic sleep timer shall be provided. [12] Voice annunciater with suitable music shall be provided in lift car. [13] Self diagnostics system for operational and safety parameters shall be provided in control panel. [14] Mechanical over speed governor, door key holes in the floor doors, fireman switch shall be provided. . [16] In the hoist way fascia plate shall be provided without any extra cost, where ever required as / if directed by engineer in charge. [17] Permanent wiring in lift machine and lift well with proper numbers of light points, with fixtures, exhaust fan and plug points shall be provided by the agency. Power supply of 3 phase 440 V shall be made available by department in lift machine . [18] Any civil/ electrical works for additional and alteration in lift shaft and machine related to erection of lift shall be made by lift agency without any extra cost.(granite/marble fixing around all landing door openings are not in lift agency’s scope.) [19] Agency has to provide all working drawings and documents and liaison services for obtaining all necessary permission from lift inspector and other authorities. [20] As per statutory requirement of Got. Of Gujarat lift & escalator act 2000, lift agency has to provide 1. Car top safety barricade 2. Push & talk communication system. 3. Fireman's switch operation at Ground Floor (Make : Schinlder,Mitsubishi,OTIS,Kone,Prince) (I) 8/10 passengers . Ground plus 6 upper floors with Rated Speed of 1.0 m/sec with micro proce/PLC control and ACVVVF. drive..DRIVING ROPES USHA MARTIN/ORIENT/IMPORTED,MILD STEEL SHEETS:SAIL/JINDAL/IMPORTED LIFT TRAVEL GROUN FLOOR TO 2ND FLOOR ABOUT 12 METERS .CLEAR OPENING 700MMX2000M HEIGHT.CAR ENCLOSER:SS CABIN FINISH.SIGNAL:IN CAR:BATTERY OPERATED EMERGANCY LIGHT ,ALARM,DIGITAL FLOOR INDICATION.AVAILABLE SIZE 1700MMX1700MM

Supplying, Erecting, Testing & Commissioning the (SERVICE LIFT) MACHINE ROOM LESS having following main features: LOAD &SPEED 340 KG@1 M/SEC [1] GEAR LESS LIFT DRIVE comprising of High Starting torque Lift duty 3 phase 440 V A. C. Permanent magnetic synchronous motor of proper rating with high efficiency shall be used.[2] Micro processor based / V.V.V.F.ARD, vector control drive with encoder feedback closed loop system shall be used for lift car and door operation which shall be full collective selective operation hall call demand response, UP/DOWN hall stops, Main, Up/ Down Contactor with overload and phase reversal relay and safety controls. [3] Car with M S platform with bracings of adequate size and to sustain the impact load cabin + passenger with safety factor of fire for steel and side panels of Stainless steel of sheet of grade 304 duty. Car ceiling will be S.S. finishes with aesthetic appearance with LED ceiling lights. Car flooring shall be of anti skid PVC with choice of colour of engineer in charge. Car doors shall be of stainless steel grade 304, hairline finish with centre opening / telescopic automatic doors. Car panel will also be S.S. 304 finished with emergency stop device, mechanical door safety device, facility of auto/ attended mode. All car panel buttons and all floor switches must be with brail language as per lift act. MACHINE drectecly plaed above hoist way.HOIST WAY required 1700mm widex1420mm deep[4] All landing doors shall be fully automatic centre opening/ telescopic opening made of hairline finish steel grade of 304 with key holes and infrared curtains with Unlocking facility from outside. [5] Appropriate battery operated emergency light in the car along with alarm switch shall be provided. [6] Digital scrolling indicator system for up-down arrow along with floor position indicator shall be provided inside the car and at all floors. [7] Full height infra red curtain with multiple criss / crossing light beams shall be provided. [8] Automatic Rescue Device (ARD) shall be provided accordingly of passenger capacity. [9] Audio visual indication in the lift car showing over loading shall be provided such that doors kept open till excess load is removed. [10] Spring buffers/PU Buffers shall be provided. [11] Car fan with automatic sleep timer shall be provided. [12] Voice annunciater with suitable music shall be provided in lift car. [13] Self diagnostics system for operational and safety parameters shall be provided in control panel. [14] Mechanical over speed governor, door key holes in the floor doors, fireman switch shall be provided. . [16] In the hoist way fascia plate shall be provided without any extra cost, where ever required as / if directed by engineer in charge. [17] Permanent wiring in lift machine and lift well with proper numbers of light points, with fixtures, exhaust fan and plug points shall be provided by the agency. Power supply of 3 phase 440 V shall be made available by department in lift machine . [18] Any civil/ electrical works for additional and alteration in lift shaft and machine related to erection of lift shall be made by lift agency without any extra cost.(granite/marble fixing around all landing door openings are not in lift agency’s scope.) [19] Agency has to provide all working drawings and documents and liaison services for obtaining all necessary permission from lift inspector and other authorities. [20] As per statutory requirement of Got. Of Gujarat lift & escalator act 2000, lift agency has to provide 1. Car top safety barricade 2. Push & talk communication system. 3. Fireman's switch operation at Ground Floor (Make : Schinlder,Mitsubishi,OTIS,Kone,Prince) (I) 8/10 passengers . Ground plus 6 upper floors with Rated Speed of 1.0 m/sec with micro proce/PLC control and ACVVVF. drive..DRIVING ROPES USHA MARTIN/ORIENT/IMPORTED,MILD STEEL SHEETS:SAIL/JINDAL/IMPORTED LIFT TRAVEL GROUN FLOOR TO 2ND FLOOR ABOUT 12 METERS .CLEAR OPENING 700MMX2000M HEIGHT.CAR ENCLOSER:SS CABIN FINISH.SIGNAL:IN CAR:BATTERY OPERATED EMERGANCY LIGHT ,ALARM,DIGITAL FLOOR INDICATION.AVAILABLE SIZE 1700MMX1700MM

Providing and fixing ms gate sliding / open with 12mm thick shera wood planks rate are inclusive of primer & oilpait etc complete

Providing And Supplying and installation of GRC Sheet work with MS pipe fabrication work for sheet supporting . Rates are inclusive of all Materials, Labour for fixing, scaffolding etc complete.

Poviding and Supplying and installation of GRC Round Cornice Rates are inclusive of all Materials, Labour for fixing, scaffolding etc complete. Dia of Column 600mm Dia Height of cornice 300mm to 600mm

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M200 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

Providing fixing and commissioning sewage treatment plant with 15 kld capacity of underground FRP sewage tretment plant based on principle of aerobic attached growth membrane bio technology (MBR) domestic STP having external MB module along with interrumentations, pumping and blower equipment. all required civil and electric work shall be measured and paid separaely.

Red Agra/Jaisalmer, etc. thickness of stone 8mm to 30mm stone coarse machine cut edges for wet/Claddings as etc., as approved by architect wet/dry cladding as decide by architect aluminum frame and copper fins and adhesive and balendura or equivalent for any height (Including of all taxes)