Public Works Department Tender
View complete overview of Daman & Diu PWD Tender
Public Works Department - PWD Tender
Civil And Construction
Eprocure
Opening Date27 Sep 2018
Closing Date15 Oct 2018
Tender Amount₹ 11,93,43,022
Costs
EMD
₹ 21,93,430Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_DAMAN_68_1Bid Award Id
ViewTender No
52/2018-2019Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://ddtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Beyond 60 cm girth upto and including 120 cm girth
2
-
-
... More
Beyond 120 cm girth upto and including 240 cm girth
2
-
-
... More
Above 240 cm girth
2
-
-
... More
Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead for all kinds of soil.
1195
-
-
... More
Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead for all kinds of soil.
123
-
-
... More
Filling in plinth with Course sand under floors including watering, ramming, consolidating and dressing etc. complete
579
-
-
... More
Supplying and Filling in foundation, plinth with murrum or selected soil brought from outside in plinth and sides of foundations, in layers not exceeding 30 cm. in depth with optimum moisture conditions to give at least 95% of the maximum dry density (proctor density) including watering, ramming and compacting using mechanical vibrator (stsatic / pneumatic) of required capacity, including freight, transportation, loading, unloading, screening, passes etc. all complete as directed by the Engineer-in-charge (Consolidated measurements of fill shall be paid for under this item). The rates shall include for all leads and lifts including transporting using mechanical / manual means within the campus area. (For all civil, plumbing and electrical works).
2461
-
-
... More
Providing and laying rubble soling in foundation, in plinth and for plinth protection, compacted thickness specified as following, using specified size of hard stones, filling, covering and leveling the surface with a layer of sand after filling the voids (upto 25%) with smaller sized black trap stones 20-40mm, 40-63mm, 63-90, 90-150mm size of stone/metals or stone chips, including watering, ramming well and consolidating each layer by static roller/ vibratory roller of required capacity as directed by Engineer-in charge.
1) 150mm to 200mm compacted thickness using minimum 100mm cut size stones
370
-
-
... More
Load testing of foundation piles including loading with necessary kentledge or any other suitable method as directed. (a) Initial Pile Load test on non working area = 150 MT for 1 test = 150 MT
300
-
-
... More
(b) Routine Pile Load test on working piles = 90 MT for 2 test = 180 MT
180
-
-
... More
Providing and injecting Chemical emulsion for PRE - CONSTRUCTIONAL anti-termite treatment and creating a chemical barrier on the top surface of plinth filling, inside junction of wall and floor, on top of damp proof course (DPC) or on masonry at level of plinth filling as per IS 6313 (Part-2)-1981 using chemical like chloropyripos emulsifiable, Biflex TC, lindane (IS 8944-1978) 20EC mixed with water in 1:19 ratio (1 litre chemical : 19 litres of water). The emulsion shall mentioned below, all as per specification and directions of Engineer-in-charge. Plinth area in plan at GF shall only be measured and paid. A guarantee bond of 10 years shall be furnished. Rate shall be inclusive of material required for Anti Termite Treatment and labour and equipments required for applying all etc complete as directed by engineer in charge.
A1) Bottom surface and the sides of the excavation made for masonry foundations at the rate of 4 litres/sq m (wherever applicable)
A2) At the rate of 7.5 litre/ sq m to the backfill at the depth of 500mm below the original ground level. The soil in the immediate contact with the vertical surface of RCC column/ Masonry shall be treated.
B) Top surface of the plinth filling including damp proof courses at the rate of 5 liter/sq m of internal plinth area etc. complete.
C) At the rate of 7.5 litre/ sq m to the internal vertical surface from original Ground level to top of the earth filled in the plinth.
D) At the rate of 7.5 litre/ sq m to the external vertical surface below finished Ground level to the full depth of the filling complete.
E) 1 litre / linear meter along the junction of wall and floor at all stages.
1668
-
-
... More
2- CONCRETE WORKS
Providing and laying in position machine mixed, machine mixed plain cement concrete (PCC) of M15 grade including all necessary dewatering, casting in panels of any size and thickness wherever necessary, to shape and depth as specified at all locations and with all leads and lift/depth, compaction, vibration, curing, transporting and pumping wherever necessary including the cost of form work (if required) and removal of formwork etc. complete as directed by the Engineer.
1028
-
-
... More
Providing and laying in position machine mixed, machine batch, machine vibrated design mix cement concrete for reinforced cement concrete work of specified grade using graded black trap stone aggregates of maximum 20mm nominal (down graded) size obtained from approved quarry including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) for durability shall be followed as per approved design mix and latest IS 456 (whichever is higher) for all elements of any shape and size, at all places and heights/ depths including laying of concrete, vibrating, finishing and curing etc. and including Admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, to improve workability without impairing strength and durability as per direction of Engineer-in-charge. Rate shall be inclusive of providing grooves, drip moulds, ghisis, pockets, cutouts etc. and labour for insert sleeves if any wherever required while casting. Rate also to include lift charges and scaffolding for all heights / depths from FFL / GL.
45
-
-
... More
Including the cost of centering, shuttering (as per specification), but excluding the cost of reinforcement - Upto Plinth level
a) M30 grade of RCC
b) M35 grade of RCC
1805
-
-
... More
Extra for Colour Concrete : Extra over concrete for providing and adding colour pigment as admixture of approved make and shade as per manufacturer's specification in specified grade of plain/ reinforced cement concrete for any type of element as per drawing and as directed by engineer in charge. Rate shall be for actual volume of concrete cast with colour pigment.
609
-
-
... More
Constructing cast in situ RCC diaphragm wall by providing and laying machine batched, machine mixed, self compacting, ready mix reinforced cement concrete, tremie controlled, of M35 grade using minimum cement content for durability shall be followed as per approved design mix and latest IS 456 design for severe condition (whichever is higher) per cum of concrete including providing and mixing required admixtures in recommended proportions as per IS : 9103, as approved by the Engineer-in-charge, for achieving 150 - 200 mm slump, for diaphragm wall having thickness as per approved structural design not exceeding 600 mm, in panels of required depth and lengths as per approved drawing, including constructing necessary guide walls as required and as specified including boring in all kinds of soils and rocks, including working in or under water and/ or liquid mud, in foul conditions and pumping or bailing out of water and removing slush, including disposal of earth/ rock/ slush etc. for all leads and all lifts, including preparing, providing and re-circulating bentonite/polymer slurry in the trench as and when required for all depths, including agitating bentonite/polymer slurry during trenching etc., providing and fixing stop ends or form tubes, upto the required depth of diaphragm wall including extracting the same after casting, including chipping off the bentonite adulterated concrete or unsound concrete up to the cut off level for obtaining the sound concrete, dressing undulations on the exposed face of diaphragm wall after excavation by chipping/ chiselling etc. complete and as directed by the Engineer-in-charge, including providing recess for bearing plates and fixing insert boxes for inclined rock anchors etc. complete as per the specifications and approved design and as directed by the Engineer-in-charge, but excluding the cost of reinforcement and inserts. (Rates include cost of all inputs of labour, material and T & P, cost of handling, lifting & placing in position the reinforcement cage in the trench, including the additional cost of welding the reinforcement bars etc. involved in the work and all other incidental expenditure for completing the work as directed by the Engineer-in-charge), however, the actual area of the diaphragm wall, correct to two places of decimel, from design bottom level to the design cut off level (including portion anchored in the rock upto the design bottom level) only shall be measured for payment.
16
-
-
... More
Boring with hydraulic piling rigs with power units, Providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-35 cement concrete to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap)
(i) 450mm dia
676
-
-
... More
Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of garde M-35 of specified diameter and length below pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. complete, including removal of excavated earth with all lifts and leads (length of pile for payment shall be measured up to bottom of pile cap).
(ii) 900mm dia Pile
210
-
-
... More
Supplying, fabricating and placing in position MS liner made of 6 mm thick MS plate for initial length of cast-in-situ concrete piles including all operation such as straightening, cutting, bending to shape, welding, fabricating, driving, placing in position, applying 2 coats of primer and 2 coats of anticorrosive paint etc. complete as per specification excluding temporary liner if provided. Depth of liner shall be decided by Engineer-in-charge and as per site condition.
9
-
-
... More
Precast Concrete for Steps - M 25 including formwork excluding reinforcement
9
-
-
... More
Supplying, fabricating and placing in position reinforcement bars confirming to IS-1786 reinforcement for RCC structure/ items as per design including transporting steel to the work site, handling, wastage, decoiling, cutting, bending, cranking, fabricating to required shape, placing in position, binding with 18 guage (1.22 mm) GI wires, welding if necessary by using approved welding rods etc. for all levels, all place, all height as per drawing etc. complete as directed by the engineer-in-charge. The quoted rate should be inclusive of cost of binding wire, chairs, pins, brackets and the same will not be measured and paid seprately (rolling margin's and wastage shall not be paid.). Measurement will be made on the length basis and converted into weight by using standard co-efficient). The reinforcement shall be
CRS Fe- 500, yield stress not less than 500 N/mm2 of TATA Tiscon CRS only
115413
-
-
... More
Providing and mixing Migratory Corrosion Admixture POLYALK CP 293 having Specific Gravity 1.01 to 1.04, pH value (Minimum 9.50) shall be alkaline in nature and having bipolar concrete penetrating corrosion inhibiting properties, inhabitor shall be non-nitrite based & have the ability to provide corrosion protection to both anodic and cathodic sites on the steel surface, inhibitor-steel complex shall formed polydentate complexes, having more than one bond with steel per molecule of inhibitor, with steel surface to promote proper film formation with enhenced bond to steel, inhibiting the electro-chemical corrosion reaction, inhibitor shall not have any adverse effect on concrete compressive strength, inhibitor shall have a corrosion rate of zero coulombs per ASTM-G109-2005, admixture shall be conforming to IS 9103 and in liquid form at the rate of 3Kg per one cubic meter volume of concrete admixture shall be added to the water, during mixing of cement, sand & aggregates and at the same rate admixture shall be added in case of Ready Mix Concrete at plant site, mixing of admixture during mixing of cement, sand and aggregates OR at work site the admixture shall be added in Concrete Transit Mixer before pumping / placing of concrete etc. complete.
1074
-
-
... More
Providing and supplying Medium duty injection adhesive for Rebar of HY200 of Hilti or equivalent of approved make for rebar fixing in Dry conditions for below specified dia. Drilling hole to the required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener with standard dispenser in hole and then fixing the re-bar, The system should be made of two foils consisting of resin and Hardener foil pack. The installation and the setting instructions should be strictly followed as per the manufacturers Recommendations. Rate shall be inclusive of scaffolding and for all places and all heights etc. and work shall be carried out as per direction of engineer in charge. Reinforcements shall be paid in relevant tender item. (Pull out testing upto 1% of total rebar is to be produced by manufacturer) a) 8mm dia bar
85
-
-
... More
b) 10 mm dia bar
85
-
-
... More
c) 12 mm dia bar
85
-
-
... More
d) 16 mm dia bar
85
-
-
... More
Extra for exposed surface on RCC Surface
219
-
-
... More
3- FORM WORK
Providing and installing centering and shuttering for specified architectural elements in new FRP moulding to give exposed quality fair finish coloured concrete in vertical casting manner, including strutting, propping, bracing to give fair/ smooth finish using best quality FRP mould (new) and supported with necessary MS adjustable steel props, H frames with bracing, adjustable spans, etc. including removal of forms for all heights and all level etc complete as directed by engineer in charge. FRP mould shall be produced according to concept drawing/ design given by architect. Shop drawing/ shuttering pattern drawing shall be produced by contractor based on concept drawing. FRP mould shall be approved before use for casting the RCC elements. One cast element also to be approved before execution of mass works. Surface area of elements shall be considered for payment. a) FRP Shuttering for column/ pillar
421
-
-
... More
b) FRP Shuttering for Architectural window projection
56
-
-
... More
c) FRP Shuttering for parapet coping
2
-
-
... More
d) FRP Shuttering for bollard
50
-
-
... More
4- MASONRY WORKS
Providing and laying brick work using common burnt clay conventional building bricks conforming to IS 1077-1992 having compressive strength not less than 35 Kg/cm2 in any shape and thickness including finishing, curing, scaffolding in cement mortar 1:5. (1- Cement : 5 -fine sand) complete as directed by engineer-in-charge.
I) In Foundation & Plinth
341
-
-
... More
Providing and laying brick work using common burnt clay conventional building bricks conforming to IS 1077-1992 having compressive strength not less than 35 Kg/cm2 in any shape and thickness including finishing, curing, scaffolding in cement mortar 1:5. (1- Cement : 5 -fine sand) complete as directed by engineer-in-charge.
II) In Superstructure above plinth upto floor two level
480
-
-
... More
Providing and laying half brick masonry with common burnt clay building bricks having compressive strength not less than 50 Kg/cm2 at all heights, levels, locations and shapes, including finishing, curing, scaffolding in cement mortar 1:4 (1- Cement : 4 -fine sand) complete as directed by the engineer-in-charge. II) In superstructure above plinth upto floor two level
259
-
-
... More
5 - DOOR WINDOW WORKS
Providing and fixing in position frames/ shutter for any type of aluminium work like aluminium door, composite door-window, window (sliding, openable, side hung, top hung, fixed etc.), casement window, aluminium partition, aluminium fixed louvers, fixed window with any type of aluminium sections of make Jindal/ Indal/ Hindalco as per approved make having minimum 50 micron pure polyester powder coating of approved shade, texture & colour of approved make for all floors/ all levels/ all heights/ all shapes/ all sizes including cutting, bending, crimping, fabricating in best workmanship manner etc as per the drawing, specification and as directed by Architect or Engineer-in-Charge.
Rate shall be inclusive of providing aluminium sections (conventional sections for partition and wooden flush doors and Euro-profile for casement window-door/ sliding windows -doors), cutting, fabrication, erection and fixing to the best workmanship manner, including 1) Sheet metal screws and casted solid aluminum corner cleats fixed with external byttins with a spring for rapid and secure joint assembly for casement and sliding shutter and frame; 2) Glazing clips for receiving infill panel; 3) Best quality wool pile where ever shutter touches the frame and compatible microwave cured EPDM rubber; 4) Dash Anchor fasteners of HILTI HRDUGT or equivalent for fixing the frame assembly to the RCC or masonry surfaces. Minimum 1 anchor fastener shall be used for every 600 mm length of section for stability of frame. 5) 10mm GI tie rod for connecting vertical stile at top and bottom for aluminum door shutter and 4mm thick solid aluminium corner cleat of full thickness of section for connecting style and horizontal rails; 6) providing and fixing packing at every 600mm c/c of average 6 mm compact sheet of width ( equal to section width less 30mm for backer rod and sealant); 7) Filling the gap between wall and frame on both sides (outside and inside ) with polyethylene baker rod of avg. 10 mm thickness of approved make and color and then sealing the remaining gap with neutral grade G/M (Glazed & Metal) weather silicon sealant of approved make and color. but excluding. 1) necessary hardware; 2) Glazing or Infill material.
Shop drawing shall be prepared and got approved from the Consultants/ Architect/ EIC before procurement of material by the contractor. Work shall be carried out as per the approved shop drawings and approved sample. Actual weight of installed Aluminium sections which are visible shall only be measured and shall be considered for the payment. Contractor shall provide guarantee for stability, water tightness etc for 12 months after defects liability period.
1198
-
-
... More
Providing and fixing glazing with toughen glass of specified thickness in aluminium door, window, ventilator shutters and partitions etc. Including EPDM rubber on the periphery of the glass, snap beading, glazing clips, neutral cure weather Silicone sealant of Dow corning 789 of approved shade etc. complete for all height / all levels / all floor in all shapes as per the architectural drawings and directions of engineer-in-charge. Installed area of glass shall be measured and paid and without any wastage. In case of half round/ round shape windows, rectangular/ square area shall be measured and paid.
a) 6 mm thick toughen glass
34
-
-
... More
Providing and fixing solid core flush type door shutter (non decorative) of approved manufacturer like Kit, Anchor or equivalent (Battens should be chemically treated & kiln seasoned & binding agent should be phenol phormaldihide) and of required size, as per approved drawing, design and direction. The rate shall also include external lipping of maximum size 10 mm X 42 mm thickness for single shutter and 25 mm x 42mm thickness for double shutter of seasoned teak wood equivalent to best quality Ghana teak all around and 2 coats of synthetic enamel painting including 1 coat of wood primer & lapi/ oil and water finished polishing or lacquer polishing to lipping, all as per approved drawing, design & direction, etc. complete, sample to be got approved by the Architect or Engineer-in-charge. Measurement including lipping shall be considered for payment. The flush door thickness shall be any of the following: (Marine treated). Necessary hardware like hinges, pivot, handle, tower bolts, locks etc shall be separately measured and paid in the relevant tender items. a) 35 mm thick
111
-
-
... More
Providing and fixing 1 mm thick Laminate sheet of approved make, texture and shade on Non decorative flush door, any ply surface etc with necessary nails, screws, adhesives as per drawings and approved sample. Laminate shall be either glossy or matt finish. The rate shall be for all heights, all floors, all places etc complete as directed by engineer in charge. Actual laid area shall be measured and paid without considering any wastage.
220
-
-
... More
Providing and fixing 6mm thick Compact Sheet of any size, any shape, any color and texture of make Greenply, Greenlam, Sundek, Vir, Bloom, Formica as per approved make in aluminium frame and shutter work with necessary cutting of sheet, single side, double side coloured as per drawing & specifications including providing and fixing EPDM quality rubber/ silicon sealant/ 3M tape/ screwing on the periphery of the sheet as per the required thickness etc. complete at all floors/ all levels/ all heights as per the drawing & directed by EIC. Cut edges of the compact sheet shall be provided with masking tape. Actual installed quantity shall be measured and paid. Rate shall be inclusive of all type of wastage.
18
-
-
... More
General Notes for Hardware: Supplying and fixing heavy quality fixtures and fittings for doors, windows, ventilators with necessary screws, nails, machine pins of SS 316 grade etc for all floor/ all levels/ all heights complete. The fittings and fixtures hardware as described in items or of make approved by Architect. Sample shall be approved before execution. Providing & fixing hydraulic rack and pinion door closer with screws to pivoted/ hinged door of approved make like Dorma or equivalent for specified door width with minimum one year guarantee. All adjustment screws face fixed. Silver finish. Rate shall be inclusive of fixing with using the template as per supplier's specification & maintain in good working condition uptill defect liability period.
a) with standard arm and with two independent closing valves and latching speed adjustable by arm without mounting back plate up to 1100 mm door width - TS 68 of Dorma or equivalent
22
-
-
... More
Providing & fixing of specified height (minimum rod size shall be 10mm) SS 316 grade brush finish Tower bolt of Kich or equivalent in wooden doors/ aluminium doors with necessary screws etc complete as approved by Architect and Engineer-in-charge.
(a) 300 mm x10 mm rod size
22
-
-
... More
Providing & fixing SS-316 grade or satin nickle plated brush finish brass butt hinge of specific size with necessary screws etc. complete of Kich or equivalent make and sample as approved by Architect and Engineer in Charge.
a) 100 x 76 x 3 mm - with ball Bearing
224
-
-
... More
Providing & fixing SS 316 satin (brush) finish push-pull pair of handle square/ rectangle shape in pair of Kich or equivalent with necessary screws etc. complete, as per drawing as approved by Architect and Engineer-in-charge. Rate shall be for all heights, all floors and all places.
a) 300 mm long x 22mm dia
22
-
-
... More
Providing & fixing 160 mm (minimum rod size shall be 12mm) satin nickel plated brush finish brass or SS 316 brush finish D shape rod handles with Tikadi of Kich or equivalent with necessary screws etc. complete as approved by Architect and Engineer-in-charge.
36
-
-
... More
Providing & fixing SS 316 brush finish solid Door Stopper with magnet, fixed type, wall mounted of Kich or equivalent with necessary screws etc. complete as approved by Engineer-in-charge in Charge.
22
-
-
... More
Providing and fixing indicator bolt of Kich, Dorma, Hafele or equivalent for toilet door with necessary screws and etc. complete as approved by the Engineer-in-charge.
38
-
-
... More
Providing & Fixing SS 316 grade Baby Latch of kich or equivalent having lenght of 100 mm including Bracket with necessary SS Screws etc. complete as specified, as per drawing as directed by engineer-in-charge.
38
-
-
... More
Providing and fixing 600 mm x 450 mm bevelled edge mirror of superior glass mounted on 6 mm thick A.C sheet or plywood sheet and fixed to wooden plugs with C.P brass screws (B) 600 mm x 20 mm size
4
-
-
... More
Providing and fixing SS 316 grade kick plate of size 1200mm x 200mm x 1.2mm for disable toilet door of kich or equivalent including fixing etc complete as directed by engineer in charge.
2
-
-
... More
Providing and fixing SS 316 grade Internal signage of size 120mm x 120mm x 1.5mm in laser print/ eaching and fiiled with duco paint of approved make and as specified type including fixing etc complete as directed by engineer in charge.
8
-
-
... More
Providing & fixing 19mm diameter SS 316 satin (brush) finish Disabled Grab Rails of 600mm long (as handle) of Jaquar, dorma or equivalaent make with necessary SS phillips headscrews etc. complete, as per drawing as sample approved by Architect/ Engineer-in-charge. Rate shall be for all heights, all floors and all places.
2
-
-
... More
Ventilator
10
-
-
... More
Providing wood work as top of seating bench with Kiln seasoned and chemically treated first class teal wood of required size as per drawing, Wooden members shall be fixed in position on RCC elements with SS 304 grade anchor fasteners of required dia & length etc complete as directed by engineer in charge. Wooden member shall be finished with polishing as specified and which shall be paid in relevant tender item.
1
-
-
... More
Providing and fixing top member of seating of bench made out of Solid Profile – 150 x 25 mm of synthetic wood (Natural Fiber Composites) of Tipco or approved equilavent make as per the drawing over the casted PCC elements with SS 304 screws, nut and finished with wooden based putty etc complete as directed by engineer in charge. (3 No of solid profile shall be fixed on two RCC support with 25mm gap between two solid profile for bench of size 1800mm x 500mm)
58
-
-
... More
7-PLASTERING & POINTING WORKS
Providing and laying average 10 mm thick single coat mala finish plaster (finished smooth with steel trowel) in CM 1:3 (1 cement : 3 Coarse sand), on ceilings and stair soffits at all floors, all shapes and all heights with necessary scaffolding, finishing, curing, making grooves, forming pattas, hacking properly to RCC surface (144 Nr of hacks per sqft) etc. complete as directed by Engineer-in-charge.
924
-
-
... More
Providing and laying average 15 mm thick single coat wire finish plaster / smooth finish plaster in CM 1:3 (1 cement : 3 Coarse sand) on sides of brick work/ blocks wall/ RCC work at all floors, all shapes and all heights with necessary scaffolding, finishing, curing, hacking properly RCC surface etc. complete to receive wall tiles as directed by the Architect and Engineer-in-charge.
1394
-
-
... More
Providing & laying average 20 mm thick mala finish cement plaster in two coats on internal/ external sides of masonry work / block wall / RCC wall at all heights, all shapes and all levels with 12 mm thick under coat in CM 1:4 (1 cement : 4 coarse sand) rough wired finish and 8 mm thick finishing coat in CM 1:2 (1 cement : 2 fine sand) mala finish (finished with steel trowel) including scaffolding, finishing, curing, making grooves, forming pattas and drip mould, hacking RCC surface etc. complete, as directed by Engineer-In-charge.
2367
-
-
... More
Providing & laying average 18mm thick double coat (water proof) smooth / wired finish cement plaster on sides of masonry work / block wall / RCC wall, 12 mm thk first coat in CM 1:3 (1 cement : 3 coarse sand) by spraying , second coat of 6 mm of CM 1:3 (1 cement : 3 fine sand) and mixing Integral waterproofing liquid admixture for mortar in recommended proportions in both coats, finishing the surface wired finish to receive the tiles / smooth finish with a floating coat of neat cement slurry at 2.75 Kg / sqm at all floors, all shapes and all height including hacking to RCC surface, scaffolding, curing etc. complete as directed by engineer-in-charge including furnishing a guarantee bond for 10 years. Cement slurry admixed with Integral waterproofing liquid admixture for mortar in recommended proportions is to be applied before each coat and final finishing coat.
727
-
-
... More
Terrace waterproofing (Sloping Roof)
Providing and carry out waterproofing treatment to sound concrete surface of toilets, sunken slabs, corridors, wet areas etc. after proper surface preparation to remove loose dust, dirt etc., repairing of cracks (if any) using polymer modified mortar, carry out cementitious injection grouting at leakage points modified with Plasticized Expandive Grout Admixture @ 225 gms per bag of cement, carry out 50 mm thick cement mortar (1:3) vatta/ corner modified with Styrene Butadine Polymer bonding agentat dosage of 2.5 Ltr per 50kg cement, Pre-dampening concrete surface, mixing and application of two coats of Elastomeric Polymer modified cementitious waterproofing coating by incorporating 45 gsm glass fibremesh between 1st and 2nd coat using suitable brush or roller as per coverage etc. complete including all tools and tackles as per manufacturer’s specification. Cured Polymer modified cementitious waterproofing coating shall comply with ASTM D4060, ASTM D4541, ASTM D638,ASTM C836 and possess below properties: Mixed density: 1.68 g/cc, Adhesion to concrete- 1 N/mm2, Non-toxic, Static crack accommodation-1 mm
Water proofing system shall be executed by only approved applicator of approved brand and under strictly supervision of technical fellow of manufacturer. The rate includes giving 10 year guarantee for waterproofing on a Rs.100/- stamp paper in approved proforma.
795
-
-
... More
Shortcreting
Providing & applying Shotcreting of 50mm thick in 1:2:1 cement concrete grout (Cement : Robosand : 6mm down size aggregates) as per IS 9012 including required fastening/ welding system with driving short soil nailing bars of 8mm dia as required on to the exposed surface of the soil as per site conditions with MS weld mesh of size 50 x 50 x 3 mm using mechanical systems to protect the soil of excavated basement walls from collapse including providing working platforms, bracings, fixtures, scafolding (if requird), all safety majors, insurance etc complete as direted by engineer in charge.
1126
-
-
... More
9-FLOORING WORKS
Providing and laying 8 to 10mm thick, double charged Vitrified tiles (full body) of size upto 600 mm in flooring of approved make, shade and required finish as approved by Architect/ EIC (Matt) for all floors/ any height/ any levels etc. with on floors, skirting, residue, steps of any approved shade as per design drawings over 20 mm (average) base of cement mortar 1:6 (1 cement : 6 coarse sand) laid on new surface or fixing on existing flooring by adhesive material and jointed with matching colour cement slurry including finishing shall be done with flush pointing with white cement and matching pigment, including curing, cleaning with mild oxalic acid, maintaining till handling over by covering with plastic sheet etc complete as directed by Engineer-in-charge.
60
-
-
... More
Providing and laying Antiskid vitrified tiles in floor (thickness to be specified by manufacturer) with residue of approved make and shade as per drawing with water absorption less than 0.08% and confirming to IS: 15622, laid over 20 mm thick cement mortar 1:6 ( 1 cement : 6 coarse sand) bedding of approved make, in all colours and shades. Finishing shall be done with pointing the joints with grey cement slurry at 3.3kg/sq m including grouting the joints with white cement and matching pigment, including curing, cleaning with mild oxalic acid, maintaining till handling over by covering with plastic sheet etc complete for all floor all height as directed by Engineer-in-charge. Size of tile upto 600 mm x 600 mm
183
-
-
... More
Providing and laying in position coloured glazed tiles of approved make and any shade of any finish of size upto 600mm x 8 mm for skirting, dado, riser of steps etc. of approved make and shade, in all colours and shades. Tile is to be fixed over 10 to 12 mm thick wired finish plaster in cement mortar 1:3 ( 1 cement : 3 coarse sand) with keeping a groove of (3mm width). Tile shall be fixed with 1:1 cement sand mortar of average 6 mm thickness behind the tiles including filling the grooves with white cement slurry of matching pigment etc. complete as approved by architect and directed by engineer-in-charge. Finishing shall be done with flush pointing with white cement slurry and matching pigment, including curing, cleaning with mild oxalic acid, maintaining till handling over etc complete as directed by Engineer-in-charge. Rate of backing coat plaster shall be paid separately in relevant tender item.
667
-
-
... More
Providing and laying minimum 30mm thick machine cut green Polished kotah stone of approved quality, selected and sorted for uniform colour, including fine smooth, and scratchless semi mirror polishing (without waxing) and having thin paper joints as per sample approved by Architect, for platforms, staircases, sitting top, parapet top, residue etc. in floor or facia etc. upto 600mm size including necessary machine - cut (uniform thickness), champhered and polished edges, necessary cement mortar bedding in CM 1:3, 20mm average thickness and jointed with grey cement as per drawing/ specification and/ or as directed by EIC. The rate shall be inclusive of making rebates of 10x10mm in risers to form grooves between treads and risers and fine polishing of top surface and all edges, rebates, grooves and protecting the flooring uptill handing over etc. including curing, finishing, buffing after final polishing up to the satisfaction of the Architect or Engineer-in-charge etc. complete.
317
-
-
... More
Providing & laying approved quality Riverwash kota stone of approved shade, thickness 30mm, in floor, pathway, sitting etc. in sizes upto 600mm x 600mm including average 40 mm thick cement mortar bedding in 1:6 laid and jointed with grey cement etc complete as per approved sample by Architect, drawings and instruction of EIC for at all floors/ all levels/ all heights and all shapes. The rate includes machine cut edges of uniform thickness, curing, finishing and protecting the flooring. Only finished work will be measured and paid. Bands of different materail as per drawing as pattern in any type of flooring shall be meausered and paid in relevent tender item . No extra payment shall be made for creating any type of bands.
2588
-
-
... More
Providing and fixing both side mirror polished 18mm thick best quality Granite stone slab of any shade any colour for Urinal partitions and Wash basin counter as per sample approved by Engineer in charge with edges rounded and mirror polished, of required size fixed as urinal partitions/ wash basin counter by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement mortar 1:2 (1 cement : 2 coarse sand) as per drawing and as per direction of Engineer-in-charge. All expose edges shall be champhered and mirror polished. Rate shall be inclusive of chasing, cutting, edge champhering, edge polishing, making holes (if required), curing, finishing, maintaining upto handling ovre the project etc complete for all height. The work shall be carried out as per the approval of Engineer-in-charge. Only finished granite work shall be measured.
20
-
-
... More
Providing and laying 60mm thick Solid Concrete Combination Cobbles of size 210mm/ 170mm/ 130mm/ 90mm x 160mm, made by vibro pressed method of VYARA or equivalent as approved by Architect/ EIC, with +/-3mm tolerance and thickness of wearing layer Not less than 5mm of any color and shade (UV Light resistant fast colours from Lanxess only to be used) having compressive strength of 50 Kg/cm2 for footpath, parking areas, service lanes and other areas as mentioned in the drawing. Combination cobbles shall be laid as per approved pattern and suggested by manufacturer. Including providing and laying average 50 mm thick average bedding layer of coarse sand below the block as per required grading and specification. Laid blocks shall be mechanically compacted. The work of the blocks shall be executed in line and level by skilled mason of flooring work only. It should be laid in such a way that the no cutting of the block to be necessary. Cutting of block shall be done using machine only and laying shall be done by skilled flooring mason. The Finished surface of the block shall have textured finish. The blocks shall be compacted and shall be re-laid if necessary. Sample of loose paver and laid paver shall be approved by consultant or engineer in charge before execution of work.
33
-
-
... More
Providing & laying Sandwich platform comprising of a) Sandwich of 25 mm thick single side polish kota of approved size, shade and sample on top and 30 mm thick polished kota in bottom with 25mm thick cement mortar (1:4) in between b) At centre vertical sandwich supports of 30 mm thick two kota stone on sides and 20mm CM (1:4) in between and at both end walls vertical supports of 25 mm thick double side kota. c) 75 mm raised platform at bottom with kota on top and 50mm CM (1:4) at bottom, kota stone skirting as per design and approved sample. The rate includes rounding, champhering and mirror polishing of edges, facias of granite, MS support including necessary bonding adhesive (if required) of BASF / Fosroc / BAL / Laticrete / Kerakoll make. Rate shall be also inclusive of making holes & cutouts for SS sink, Oval wash basin, Piller tap / Bib tap etc. as directed by engineer in charge. (Only plan area shall be measured & paid for).
120
-
-
... More
Providing and laying cement concrete flooring 1:2:4 (1-cement : 2- coarse sand : 4-graded stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of neat cement. (B) 50mm thick.
1169
-
-
... More
Providing and fixing in position 40mm thick River wash finish acid and alkali resisting Red Mandana stone of approved size and shape for flooring, plaza, tread of steps and otta, fixing on average 40 mm thick cement mortar bedding 1:4 (1cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touchup, including rubbing, curing, moulding and polishing etc. complete at all levels. Exposed edges of stone shall in even thickness, champhered and finished. The work shall be carried out as per the approval of Architect and engineer-in-charge.
1200
-
-
... More
Providing and fixing in position 25mm thick acid and alkali resisting River wash finish Red Mandana stone of approved size and shape, in riser, dado, fixing on average 12 mm thick cement mortar bedding 1:3 (1cement : 3 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing etc. complete at all levels. Exposed edges of stone shall in even thickness, champhered and finished. Contractor to be secured to the backing and the sides by means SS 304 cramps and pins. The work shall be carried out as per the approval of Architect and engineer-in-charge.
47.4
-
-
... More
Dry stone clading with Red mandana stone Providing and fixing dry cladding upto 10 metre heights with 35 to 40mm thick gang saw cut stone with (machine cut edges) of uniform colour and in any size, fixed to structural steel frame work and/ or with the help of cramps, pins (adjustable SS 304 dry stone clading clamps of approved make and quality, required shape and size, adjustable with stainless steel nuts, bolts and washer) etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. Rate shall be inclusive of required size of finished stone, cladding clamp with fastner, scafolding, labour, sealant, etc complete for all floor all level.
10
-
-
... More
Providing and fixing in position average 18mm thick flame finish Granite stone slab of approved shade, size and shape for flooring, plaza, tread of steps and otta, fixing on average 40 mm thick cement mortar bedding 1:4 (1cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing etc. complete at all levels. Exposed edges of stone shall in even thickness, champhered and finished. The work shall be carried out as per the approval of Architect and engineer-in-charge.
800
-
-
... More
Providing and fixing in position 18mm thick Flame finish Granite stone of approved shade, size and shape, in riser, dado, fixing on average 12 mm. thick cement mortar bedding 1:3 (1cement : 3 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing etc. complete at all levels. Exposed edges of stone shall in even thickness, champhered and finished. Contractor to be secured to the backing and the sides by means SS 304 cramps and pins. The work shall be carried out as per the approval of Architect and engineer-in-charge.
364
-
-
... More
Providing and Fixing natural rough/ polished cobble coloured stones patterned having maximum diameter in any one direction between 80 to 300 mm (colour shade and shade of stones approved by the client including joint filled up with coloured cement to match cement mortar bedding 1:4 (1 cement:4 coarse sand combination) including 100 mm thick M-15 grade PCC bed (selection of all items and sample approved by client and site in charge)
1010
-
-
... More
STONE CLADDING (BLACK GRANITE POLISHED ) : Providing and fixing black granite polished stone of thickness 18mm and size as per the detail of architect including cutting its edge,fixing in cement mortar bedding (1:4) of thickness 25mm in required patternas directed by engineer-in-charge.
10
-
-
... More
Providing and laying Porcelain Mosaic tiles or Glass Mosaic of make by piccolo, Italia or Equivilant in different sizes (25mm x 25mm/ 50mm x 50mm/ 100mm x 100mm) having 8 mm thickness with water absorption less than 0.08% and conforming to IS: 15622, in any colours and shade, in Water body, skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints. The Glass mosaic tile shall be fixed as per approved pattern and design. Sample to be approved by Architect.
267
-
-
... More
10- STEEL WORKS
Structural steel work in riveted, bolted or welded in built up sections framed work including supplying, fabricating, cutting, assembling, hoisting and fixing in position at all heights of all shapes and size with all leads and lifts as per latest IS 4923, IS 1161, IS 806 for the work of handrail, stair railing, grill, gate, insert plate, grating, brackets, framing for parking shed, MS post and frame work for fencing, signage post and similar works. It should be including necessary rolled sections, hollow section etc. including cutting and welding the members as per detailed drawing and design. The rate shall include dry sanding, degreasing (wet cleaning) & preparation of rustfree surface manually or mechanically, metal putty to make the surface even and smooth, 1 coat of zinc rich primer of approved make and 2 top coats of Metal PU Paint of having DFT 40 to 50 micron of approved make and shade as per manufacture’s specification over all the surfaces of the steel sections or as specified in the drawing. (Only standard measurements will be paid for as actual cut length used at site). Shop drawings for the connection details shall be prepared for the approval of the architect. Rate shall be inclusive of cutting, wastage, welding, bending (shop at site), bolting wherever necessary, in position welding of required length, grinding, finishing edges, filling the welded spots with metal putty, and PU paint with primer. It should also include the cost of approved ISI make and size zinc coated nut-bolt and Anchor fasteners of Hilti, Fisher or equivalant as approved by engineer-in-charge. The fabrication work shall start after approval of finished sample as per drawing by Architect. Fabrication works to be carried out as per relevant IS standards. Rolled steel sections (equal and unequal angles, square or round bars, flats, angles, tees, channels, plates of different sizes etc.), Solid flats, bars, RHS, SHS, tubular hollow sections of specified thickness & yield strength of TATA or equivalent as approved by EIC & as per drawing
3182
-
-
... More
Hot dip galvanizing work confirming to IS 4579/ 2629/ 2633 with zinc of 85 micron thickness on Railing, Handrail, flag fixing sleeve pole, garbage box, Street furniture and similar works etc made from solid flat, bar, RHS, SHS, tubular hollow sections etc. as per the drawing and as instructed by engineer in charge. The rate shall include preparing the surface by shot blasting/ acid washing prior to hot deep galvanizing, labor, tools, machinery etc complete (Sample to be approved).
20
-
-
... More
Providing and fixing in position, interlocking rolling shutter of approved make, made of 18 gauge, 80mm wide cold rolled MS lath interlocked, including top cover (16 gauge), spring, axles (specially designed shaft), guide rails (10 gauge), tees, iron pulleys, ball bearings, handles, arrangement for inside and outside locking arrangement, with push and pull arrangement (manually operated), holding down bolts embedded in CC 1:2:4 / anchor fastener of HILTI or equivalent including 1 coat of zink rich primer and 2 coat of Hi-Gloss Metal PU Paint of approved make over all the surfaces etc. as directed. (Measurements considered for payments shall be clear size of opening plus guide channels on both the sides for width and 450mm on top for drum height.)
33
-
-
... More
Providing and fixing stainless steel (Grade 316) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel anchor fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Architect and as directed by Engineer-incharge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Rate shall be inclusive of bolts, fastner, all accesories for fixng and fabrication for all level all height etc complete. All anchore fastners and accessories shall be of 316 grade steel.
120
-
-
... More
11- PAINTING WORKS
Providing & applying 100% External Acrylic emulsion Paint of desired shed from Apex ultima of Asian, ICI or equivalent in minimum three coats (1 coat of exterior grade primer and 2 coats of paint) to give an even shade with brush on exterior sand faced plastered surfaces / mala plastered surfaces / textured surface or any surfaces at all heights including scaffolding, thoroughly brushing the surfaces with sand paper to make it free from mortar dropping and other foreign matter etc. complete as per the manufacture's specification and up to the satisfaction of Engineer in charge. The rate shall also include the cost of filler for cracks on the surfaces. (Rate shall be inclusive of minimum 1 coat of exterior grade appropriate primer).
1169
-
-
... More
Providing and applying three coats of plastic emulsion paint from following of Asian, Nerolac, Berger or equivalent approved make, color & shade (first two coats with brush and final coat with roller), on newly dry interior plastered surface at all heights give an even shade, including primer after thoroughly brushing the surfaces free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth etc. after applying every coat of putty. Priming coat of alkali resistant cement primer (water or solvent based) is to be applied on putty etc. complete as directed by engineer-in-charge. Sample to be approved before starting of the work. The rates shall include the cost of filler for filling the cracks on surface.
2143
-
-
... More
Providing and applying Silicone paint of Wacker SILRES(R) BS 290 or equivalent dilute in praportion 1 liter : 13 liter solvent as recommended by manufacturer over exposed concrete surface, stone masonry, stone paving (Two coats on wet on wet applied ) for all height, all level etc complete as directed by the Engineer-in-charge, so as original look does not change. The contractor shall furnish a minimum 5 years guarantee on stamp paper to the employer directly. Rate shall be inclusive of tools, tackles and necessary scafolding for application.
2840
-
-
... More
Providing and applying exterior grade water base Poly urethane (PU) clear matt finish/ glossy finish/ semi gloss finish polish of approved make for external wooden surfaces (Wooden planks for bench) as per manfacturer's specification and as per drawing and as directed by engineer in charge. Sample shall approved by Engineer-in-charges.
58
-
-
... More
12-ROOFING WORKS
Providing and laying pressed clay tiles (Mangalore tile) of 20 mm nominal thickness as per approved pattern on roofs jointed with cement mortar 1:3 (1 cement : 3 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) and finished neat complete for all height all level as directed by engineer in charge.
795
-
-
... More
Metal False Ceiling:
Providing, fixing and laying of plain finish GI metal ceiling system consisting of 600 x 600mm lay in tiles of pre-coated galvanized steel in 0.5mm thickness in white color which is to be laid on grid system with 15mm wide T-section flanges colour white having rotary stitching on all T sections i.e. the main runner of 1200 mm & 600mm cross Tees with web height of 43 mm and load carrying capacity of 14 KG/ SQM. The T-sections have a galvanizing of 90 grams/sqm and passed through 500 hrs of salt test. To comprise main runner spaced at 1200mm centers securely fixed to the structural soffit using suspension system at 1200mm maximum centre. The First/Last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centers. tile, grid system and suspention system shall be of same make and as per approved sample. The Tile & Grid system used together should carry a 10 year warrantee. Installation will be done by approved installer only. Groove shall be provided at the junction of the false ceiling & the wall as per drawing. The shop drawing, specification and sample mock of minumum 5 Sqmt with framework shall be approved from Architect/ EIC. Rate shall also include cost of making of all cutouts for light fixtures, gadgets, gizmo, pelmets, grooves, beads and also provide support/ template where ever required. The rate shall be in Sqmt for all floors/ all heights/ all levels including scaffolding and all other costs.
360
-
-
... More
ROAD WORKS
Box cutting the road surface to proper slope and camber for making a base for road work including removing the excavated stuff and depositing on the road side slope as directed upto 50Mt.lead.
1440
-
-
... More
Scarifying gravelled macadam or bitumen macadam surface 6 cm to 10 cm.depth including stacking useful materials on road side and disposing off remaining stuff.
1843
-
-
... More
Providing and laying of dry lean cement concrete (DLC) of M15 grade and compacting the same with 8 to 10 Tone vibratory roller as per the specifications and as per drawing and as directed by the Engineer. Rate shall include cost of formwork if any.
1162
-
-
... More
Road work : construction of unreinforced, dowel jointed, thickness as per drawing M40 grade plain cement concrete pavement (broom finish) as per Specifications and in conformity with the lines, grades and cross sections shown on the drawings. The work shall include furnishing of all plant and equipment, materials and labour and performing all operations in connection with the work, as approved by the Engineer. The unit rate also includes full costs of contraction, expansion, construction and longitudinal joints. It shall also includes joint filler, keys, caulking rod, debonding strip, sealant primer, joint sealant, dowel bar and tie rod. And it shall also includes cutting and making of groove in cement concrete floor as per the drawing. For construction of road TRIMIX vacuum dewatering system shall be used. (Sample to be approved)
704
-
-
... More
Sub Grade Construction - Earthwork for embankment including breaking clods, dressing with all lead and lift and including watering rolling and consolidation of subgrade in layers at O.M.C. to required dry density including filling the depression which occur during the process using power roller 8T to 10T.(E) From Borrow area within 3.0KM. lead (more than 10 ton) . Construction of sub grade and earthen shoulder satisfying the requirements of minimum soaked CBR value of 8 with approved material obtained from borrow area with all lifts and lead and rolling, watering all complete as per Technical Specification.
423
-
-
... More
Granular Sub Base Construction - Construction of compacted Granular sub base (Grade-II) crushed B.T. material of (53mm to 95mm @50%, 9.5mm to 2.36mm @ 20% below 2.36mm @30%) by providing close graded material mixing in a mechanical mix plant at OMC, carriage of a mix material to work site, spreading uniform layers with motor grader on prepared surface & compacting with vibratory power roller to achieve desired density complete
176
-
-
... More
WMM ( Wet Mix Macadam): Providing , laying and compacting clean, crushed, graded aggregate and granular material, premixed with water, to a dense mass on a prepared subgrade/sub-base/base in accordance with the requirements of these Specifications. The material shall be laid in 100 mm layers to lines, grades and cross-sections shown on the approved drawings or as direction by the Engineer.The contractor unit rate includes furnishing all materials to be incorporated in the work including all royalties, fees, rents where necessary and all leads and lifts, all labour, tools, equipment and incidentals to complete the work to the Specifications,)carrying out the work in part widths of road where directed; and carrying out the required tests for quality.
141
-
-
... More
Providing and laying Bituminous concrete with B.T. stone chips as per MORTH gradation and specifications using VG 40 bulk bitumen for mixing at the rate of 5.0 % (50.0 Kg./M.T.)by wt. of total mix inclg. heating the asphalt, using the emulsion (R.S.) for tack coat @ 2.5 Kg/10Sq.M. and aggregates by continous batching drum mix plant and spreading the same by paver finisher to the required camber and grade, including rolling with vibratory roller to achive desired density and using, fire wood, oil, Kerosene, labour charges and hire charges of machinaries etc. complete.
59
-
-
... More
Pre cast concrete for Architectural Details including kerbs, steps, etc. Providing & fixing M25 grade of concrete precast exposed/ fare finish kerb stones (factory made) of approved make and as per sample approved of following sizes on the foundation prepared of M15 grade concrete as of approved design including curing, formwork etc. complete. The rate shall also include for erecting and fixing the pieces in position for complete Kerb application with chamfered type of kerbs including necessary accessories of kerb like Radius Kerbs, Angles and Quadrant Kerbs etc complete as per drawing. The rate shall also include the flush pointing in CM (1:2) for all joints of the kerbstones. (Sample must be approved). The contractor rate shall also include the cost of excavation, base PCC M15 grade and finish good, curing etc complete as directed by engineer in charge.
223
-
-
... More
Providing and fixing rubber speed breakers (with polyurethane binder) of size 500mm x 350mm x 50mm lining with 8 no of inbuilt cat eyes per piece Including intermediate and end members as per manufacturer's specifications or supplier's specifications and as directed by engineer in charge. Weight of speed breaker approximate 15 Kg/Rmt and weight capacity 20 Tons with high impact resistance and brutal weather condition. Speed breaker shall be fixed with grout (min 8 holes for fixing per piece) and as per manufacturer's specification. Sample shall be approved by engineer in charge.
60
-
-
... More
Providing and applying average 2.5 mm thick road marking strips of any size, shape, graphic, letter etc (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
342
-
-
... More
Supplying and fixing cat eye (Stimsonite) made out from Acrilo beautile sterine injuction high compressed molding with reflector made of MMC (prismatic type of size 12cm x 6cm x 2.5cm) provided with bituminous adhesive 100g. with each unit for fixing.
458
-
-
... More
GENERAL DEVELOPMENT WORKS
Garden Soil Filling The good quality garden soil shall be obtained from outside which can be useful for all plants. Laying of soil shell be done in proper slope as per mention in drawing including watering, compacting and dressing etc. complete, as directed.
225
-
-
... More
Tree Pit -Providing and making tree pit. It includes excavation upto 1200 mm depth including removal of the debris, metal and achieving the natural earth level sufficient for the growth of the trees. Size of the pit is 800 mm x 800 mm / 800 mm dia. first 600 mm depth shall be filled with Natural good soil. 700 mm dia. NP3 class Hume pipe with 500 mm height to be placed on the filled garden soil and outside area of the Hume pipe to be filled with the good quality earth. Hume pipe shall be filled with the garden soil, farm yard manure and required pesticides. etc. completed as directed by Engineer-in-Charge.
731
-
-
... More
Providing and fixing Tree Guard, fabricated from 25 x 25 x 3 mm angle and 32 x 32 mm of 3.2 mm thick weld mesh as per drawing and details. Necessary provisions for the anchoring to floor shall be made in the tree guard. Tree guard shall be painted with 1 coat of epoxy primer of 50 to 60 micron DFT (dry film thickness) and 2 top coats of Metal PU Paint of having DFT 40 to 50 micron of approved shade of MRF or equivalent paint as per manufacture’s specification over all the surfaces or as specified in the drawing as per the shade approved as per the drawing and specification. The rate shall also include the fixing of necessary name plate. (Sample to be approved)
731
-
-
... More
Tree pit cover - Providing, making & fixing tree pit cover around the tree pit, factory made exposed /fare finish precast Tree pit cover block of two halve in FRC concrete of size upto - 1.20 Mt x 1.20 Mt x 0.065mt including transporting, fixing etc. complete. The rate shall also include for erecting and fixing the pieces in position as shown in the drawing with necessary equipments without any demage. (Sample to be approved)
731
-
-
... More
SHRUBBERY PLANTATION Supplying well grown shrub plants and ground cover plants of height as below and planting as per drawing by providing and mixing garden soil with vermi compost (@ 250kg / 100 Sqm) or mixture of decayed neem cake and tobacco powder in depth of planter as per drawing with soil pesticide & insecticide. Plants should be disease free and fungus free in 8"x 10" polythene bag. Plastic bags or pots should be removed carefully and soil around the roots should not be dropped or disturbed much. Bill shall be placed after completion of maintenance period but not before stabilizing the shrubs. Mortality rates to be inclusive. Work shall be done as shown in the drawing or as directed and approved by EIC. The ground coverage should be dense and uniform throughout the planting area. a) 1 Ft. Height
1112
-
-
... More
TREES PLANTATION
Supplying and planting of trees of specified variety in existing prepared tree pit including pesticides, termite treatment, and planting of mature plants (height minimum 15' or above as approved). Soil mounts 2' - 3' in size. Tree plantation should be carried on neatly accurately and with perfection as per drawing and instruction given by the EIC. Plants shall be planted by manual/ mechanical means and rate shall be inclusive of all material, labour, equipments as per description. Plant must be supply in bag size of 25"X25" or above. Plastic bags or pots should be removed carefully and soil around the roots should not be dropped or disturbed much. Rates for mortality to be inclusive. Work shall be done as shown in the drawing or as directed and approved by EIC.
731
-
-
... More
Supplying and installation of street benches of size 1830 mm length x 533 mm wide at legs x 685 mm high x 380 mm seat made out of CAST IRON with necessary mild steel (Hot deep Galvanized) works framing with one coat of epoxy primer and PU paint of approved make and shade. Teak wood ghana planks of size 1830mm lenght x 75mm wide x 25mm thick with external grade PU polished finish of approved make and shade shall be fixed on seat of bench with necessary hardware etc complete and fixing the bench to floor as per the detail drawings and instructions of engineer in charge. The rate should include fixing of benches to floor etc. complete. Sample shall be approved by architect.
36
-
-
... More
BENCH: providing,supplying and fixing benches at site of make( Cassagroup, Model :Quadrefoil 48" long CAST IRON seat) as per approved design and drawings and approval of artichet etc. complete as directed by engineer in charge.
10
-
-
... More
Providing and installing floor/ mounted dustbins of Sintex, Nilkamal, Prince or equivalent. Dust bin shall be one Piece Moulded, Heavy Duty Waste Bin of approx. 80 Litres capacity made out of FDA approved virgin grades of Polyethylene material manufactured from Rotational Moulding Process / Blow Moulding Process absolutely smooth and sanitary, chemical resistant, blended with stabilizers, Anti Corrosive, Anti Acidic, Non toxic and free from joints, welds or rims; provided with fully openable unique lid, open from either side for easy garbage drop even from distance, ideal for Storage and Handling of Solid Waste to satisfy the critical requirements of MSW 2000. Virgin Grade of Polyethylene material confirming to the requirement of IS 10146 – 1982. Dustbin shall be fixed on floor or wall as per approved sample.
36
-
-
... More
DUSTBIN: providing,supplying and installation of Dustbins at site made of Cast Iron, Black & Silver of size 400x975mm as per the approved design and drawings and approval of architect etc. complete as directed by engineer in charge.
10
-
-
... More
ACP sheet signage on door/ wall mounted/ hung from ceiling:
Providing, Making and fixing 4 mm thick ACP sign of any shape and size of Flexi bond or equivalent to be cut on CNC router cutting and smoothen all corners and edges. ACP sheet shall fixed on both side of framing and sign shall be done on one side. Matter shall be cut in 3M Reflective vinyl and paste on it as per design and detail and as per manufacturer's specifications. UV stabilized lamination shall be done on it. The ACP sheet shall be fixed or hanged with necessary SS fastners, self adhesive tap of 3M on existing MS pole. Pasting of vinly must be accurate as per the design on the approved size ACP without any kind of bubbles. Content of sign shall be letters (In Gujarati & English), graphics/ maps, signs etc. in any colour as per design, drawing and approved by Architect and Engineer in charge.The rate shall also include cost of scaffolding, drilling, fabrication, finishing, adhesive material etc at all height and all lead but exclusive the cost of structural steel work. The contractor should submit the drawings based on concept design and do the sampling and get it approval before mass production.
38.08
-
-
... More
LAWN PLANTATION (Selection-1) :Supply & plantation of Selection 1 lawn (To be planted in garden soil over already dressed area ) Area dressing will be carried out on finally dressed leveled land as per site condition including mixing the garden soil with soil additive @ 5kg per M2 etc. Complete as directed by engineer-in-charge .
3855
-
-
... More
Chain link 2, 10 x 10 gauge (Galvanised) providing and fixing chainlink fencing for maze garden using 2 mm thick chainlink with 10cm x 10cm gap streched and tight and fitted to vertical MS angle ISA 50X50X5 mm(of jindal made or equilvalent) post erected at avg. distance of 1.75 mtr c/c in proper line and level complete as per detail design and drawings directed by engineer in charge.
10
-
-
... More
Bollards Model : providing, supplying and fixing bollards at site with its all necessary fittings of model :Chatsworth make kesslec schreder of dimension(Height 1000MM, Diatmeter 180mm) of cast iron make and non illuminious of desired colour etc complete , as approved the architect and directed by engineer in charge.
10
-
-
... More
Sculpture Bronze - as per Architect's instruction
1
-
-
... More
STORM WATER & INTERCEPTOR SEWER NETWORK
Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for storm water network including setting and joining the pipes in C.M. 1:2 watering and laying (To level of slops of I.S. 458 / 1971 Class NP4 of following internal diameter as directed by engineer in charge. Excavtion and back filling with compaction shall be paid in relevant tender items.
(ii) 450 mm dia.
171
-
-
... More
Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for storm water network including setting and joining the pipes in C.M. 1:2 watering and laying (To level of slops of I.S. 458 / 1971 Class NP4 of following internal diameter as directed by engineer in charge. Excavtion and back filling with compaction shall be paid in relevant tender items.
(iii) 600 mm dia.
342
-
-
... More
Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for storm water network including setting and joining the pipes in C.M. 1:2 watering and laying (To level of slops of I.S. 458 / 1971 Class NP4 of following internal diameter as directed by engineer in charge. Excavation and back filling with compaction shall be paid in relevant tender items. (iv) 900 mm dia.
342
-
-
... More
Providing & fixing Fiber reinforced concrete heavy duty manhole frame and cover as per drawing having load bearing capacity of 35 MT each with lifting arrangements including loading, carting, unloading, stacking, fixing in cement concrete of 1:2:4, finishing with existing surface etc complete as directed by engineer in charge.
101
-
-
... More
IRRIGATION WORKS Clear wind-stable full stream jet 1 Inch inlet size & 14 mm bore with Up to 15° vertically pivoting ball joint, Water-level independent With flow director, Durable chromend and nickel plated brass.
12
-
-
... More
LED Light monochrome , warm white 5.8 watt 24 V DC, can be installed under water or dry, IP68 rated having 110 lumen rating with Broad half peak angle of 30° for flexible light accents with underwater 24 VDC Power LED Driver
24
-
-
... More
Pumping System for Jets with VFD - 26 LPS, 5 m head x 3 Pumps (1 Working + 1 Standby)
1
-
-
... More
Pumping System for Sheet with VFD - 110 LPS, 5 m head x 4 Pumps (2 Working + 1 Standby)
1
-
-
... More
Filtration Unit, Autoback Filter capacity 25m3/hr 50 Micron with Electric Control
1
-
-
... More
Pumping System for Filter 25 m3/hr- 25 m head, 2 pumps (1 Working + 1 Standby)
1
-
-
... More
Prssure Reducing Valve 2" Hydraulic Type
1
-
-
... More
Led Light 12 VAC, 10 watt for Sheet
26
-
-
... More
Underwater power supply 150 / 12 V /01
2
-
-
... More
Perforated PVC Pipe defuser 10 inch
18
-
-
... More
Piping Network from 12" to 1" Sch 80 / PN10 Pipe with all required Fittings
1
-
-
... More
Electrical under water Poer Cable from Light / Underwater power supply up to Panel in Pump room with junction box and all required accesoires
1
-
-
... More
PLUMBING WORKS
CHAPTER: 23 - WATER SUPPLY, PLUMBING & SANITARY FITTING
Providing and laying in trenches galvanised mild steel tubes (Medium grade) of the following nominal bore, and tube fitting (Earthwork in trenches to be measured and paid for separately)(E) 65mm (upto 10 ton)
121
-
-
... More
Providing and fixing in location 65mm diameter C.I. butterfly valves , water end type class PN 1.6 as per I.S:13095 or BS:5155 with integrally moulded linear of nitrile or EPDM, SS Disc and lever operated including necessary nuts, bolts, gaskets, flanges etc. All complete and as per the directions of the Engineer - In - Charge.
5
-
-
... More
Providing & fixing Divyang toilet set with European Closet & wash basin & all handicap requirement with dual flush tank, seat & lead (heavy duty) including C.I. Brackets, C.P. brass hinges, M.S. / C.I. painted brackets, Waste Coupling, 32mm size bottle trap etc. all Internal fittings complete with grab rails etc. rubber buffers, C.P nuts, bolts etc making holes in walls & floors, & finishing for ready to use.The rate includes all necessary connection charges as per product detail to the satisfaction of engr. incharge where required & the final handing over etc. complete as per specifications, drawings and as directed by the Engineer-in-charge. Make: Cera - Cruse - Set or Equivalent of the same make.
2
-
-
... More
Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm (Earthwork, bed concrete, foot reste and trap to be measured and paid for separately)
(A) Vitreous China.(I) Long pattern = White colour
8
-
-
... More
Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately)
(A) vitreous China Pattern :(i) in white colour
8
-
-
... More
Providing and fixing 100mm size P or S trap for water closet squatting pan including jointing the trap with the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand)
(A) Vitreous China.
8
-
-
... More
Providing and fixing in Cement Mortar 1:3 (1-Cement : 3-coarse sand) a, pair of white vitreous China 250mm x 130mm x 30mm footrest to long pattern squatting pan water closet.
8
-
-
... More
Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately)
(A) Vitreous China (I) In white colour
8
-
-
... More
Providing and fixing in position with clamps etc. 32mm nominal internal diameter galvanised steel tube flush pipe for high level flushing cistern including connecting the flush pipe with cistern and closet and making good the walls and floors.
8
-
-
... More
Providing and fixing G.I. inlet connection for flush pipe with W.C. Pan
8
-
-
... More
Providing and fixing plastic seat and cover for wash down water closer with C.P. brass hinges and rubber buffers.
(B) Black plastic seal and cover.
8
-
-
... More
Providing and Fixing PTMT Flush Cock for IWC as per specification and conforming to Manufacturers Standards.
8
-
-
... More
Providing and Fixing PTMT 2-Way Bib Tap as per specification and conforming to Manufacturers Standards.
10
-
-
... More
Providing and Fixing PTMT Health Faucet with PVC hose and Holder as per specification and conforming to Manufacturers Standards.
10
-
-
... More
Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes and making good the same but excluding fittings.
(A) Vitreous China (ii) Flat Back washbasin 550 mm x 400mm size. (i) In white colour.
20
-
-
... More
Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including cutting holes in walls and making good the same but excluding fittings.
(C) Vitreous China Sink (i) 600mm x 450mm x 150mm size
12
-
-
... More
Providing and fixing C.P. brass waste for washbasin or sink.
(A) 32mm dia.
20
-
-
... More
Providing and fixing C.P. brass waste for washbasin or sink.
(B) 40mm dia.
12
-
-
... More
Providing and fixing M.I. fisher union for washbasin or sink.
(A) 32mm dia.
20
-
-
... More
Providing and fixing M.I. fisher union for washbasin or sink.
(B) 40mm dia.
12
-
-
... More
Providing and fixing PTMT Shower rose with 15mm or 20mm inlet.(A) 100mm dia. Each
16
-
-
... More
Providing and fixing PTMT shower arm of 225mm length with wall flange.
16
-
-
... More
Providing and fixing PTMT concealed stop cock for shower with wall flange.
16
-
-
... More
Providing and fixing PTMT Long body Bib Tap for shower room, wash basin and kiosk sink.
48
-
-
... More
Providing and fixing 450mm long PTMT Towel Rail with all necessary nuts and rawl plugs.
16
-
-
... More
Providing and Fixing PTMT screw down Bib Tap of 20mm diameter with wall flange.
8
-
-
... More
Providing and Fixing PTMT Stop Tap (Angle Cock) of 20mm diameter with wall flange.
44
-
-
... More
Providing and fixing PTMT 450mm Long Braided Hose with M10X1 Nipple, 15mm Nut, O-Ring & Rubber Washer of 450mm length (Suitable for Wash Basin, Kitchen Sink etc) as per specification and conforming to Manufacturers Standards.
44
-
-
... More
Providing and fixing PTMT bottle trap with necessary couplings of approved quality for wash basin.
20
-
-
... More
Providing and fixing PTMT bottle trap (38/40mm for kitchen sink) with necessary couplings of approved quality for kitchen sink in kiosks.
12
-
-
... More
Providing and fixing PTMT Urinal Pressmatic Flush Valve with Spreader. 20mm diameter with wall flange and connection nozzle for spreader.
12
-
-
... More
Providing and fixing Urinal or approved quality including connecting the Urinal with waste pipe , tap etc. complete.(A) White earthenware flat back or corner type size 430mm x 260mm x 350mm.
12
-
-
... More
Providing & fixing P- trap of self cleansing design haivng water seal not less than 50mm with necessary distance piece & making connection & support to bottom of trap etc. complete as per specifications & drawing porvided at all places, all levels & all height.
(A) 110 mm inlet and 110 mm outlet
58
-
-
... More
Providing and fixing PTMT Grating with PTMT Cockroach trap including setting in floor with cement motor to match with floor finish as per requirement.
(A) 150 x 150mm
50
-
-
... More
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[A] 15 mm.
68
-
-
... More
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[B] 20 mm.
56
-
-
... More
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[C] 25 mm.
18
-
-
... More
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[D] 32 mm.
44
-
-
... More
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[E] 40 mm.
16
-
-
... More
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[F] 50 mm.
9
-
-
... More
Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.
22
-
-
... More
Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.
11
-
-
... More
Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.
267
-
-
... More
CHAPTER: 24 - DRAINAGE & SEWERAGE
Providing and fixing S.W. Gully Trap with CI grating brick masonary chamber and water tight CI cover with frame of 300 mm x 300 mm (inside) with standard weight. (i) Square mouth traps
[B] 150 mm x 100 mm size - P or R type
12
-
-
... More
Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.(C) 250mm (upto 10 ton)
119
-
-
... More
Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.(D) 300mm (upto 10 ton)
119
-
-
... More
Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stpme aggregate 20 mm. nominal size, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 Brick bats 40 to 50 mm. size) inside plastering 15mm thick with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 20mm nominal size) finished smooth complete including curing and testing. (i) Inside size 900mm x 1200 mm and 1.50 meter deep including heavy duty FRC Manhole frame and cover of size - 600 x 600/ 600 dia with 30 - 35 T capacity (A) with 230 mm thick walls of brick masonary using bricks having crushing strenght not less then 35 kg/sq.cm in cement motar 1 : 5 (1 cement : 5 coarse sand)
(1) A type depth 0.9 metre for 150 mm diameter sewer
13
-
-
... More
(I) Extra rate for constructing B.B. masonry for every additional depth of 0.1M. or Part thereof over item No.24.27 (Line Item No. 55) (I) for depth from 0.9M to 1.5M.
5
-
-
... More
Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm and painting with two coats of Anti-corrosive paint etc. complete.
15
-
-
... More
Constructing brick masonary chamber for under ground Inspection Chamber and bends with bricks having crushing stregth no less then 35 kg/cm2 in c:m 1 :5 having FRC cover with frame (medium duty) of size 450 mm x 600 mm of 10T capacity. R.C.C.top slab with 1: 2 : 4 mix (1 Cement : 2 coarese sand : 4 grade stone aggregate 20 mm size) foundation concrete 1 : 5 : 10 inside plaster 15 mm thick with cement mortar 1 : 3 finished smooth with a floating coat of neat cement on walls and bed concerete etc. complete.
(ii) Inside dimension 500 mm x 700 mm and 450 mm deep for pipe line with one or two inlets
4
-
-
... More
Extra over items 24.44 for every additional depth of 0.1M. of part thereof beyond 450mm depth for Brick masonry chamber.(ii) for 500mm x 700mm size.
18
-
-
... More
ELECTRICAL WORKS
DISTRIBUTION BOARD
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) (a) (F) Single phase 8 way SS Double door
2
-
-
... More
(b) (H) Single phase 12 way SS Double door
6
-
-
... More
Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark - Cat - III
56
-
-
... More
Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity
6 to 32 Amp. - Cat - III
8
-
-
... More
Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity
40 Amp. - Cat - III
1
-
-
... More
Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity (a) 6 to 32 Amp. - Cat.III
1
-
-
... More
(b) 40 Amp. - Cat.III
1
-
-
... More
Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on single phase 240 V. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed
(i) 25 Amps.DP - Cat. III
1
-
-
... More
(ii) 40 Amps.DP - Cat. III
1
-
-
... More
Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on 3 phase and neutral 415V. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component for following Max. rating erected as directed.
(i) 25 Amps.FP Cat. III
1
-
-
... More
(ii) 40 Amps. FP
1
-
-
... More
Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current device having 6 KA short circuit breaking capacity and 100 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS 12640 test knob facility trip free mechanism operating for rated leakage at nominal ten volt, complete erected including all materials lugs screws etc. completed. [a] 6A / 10A / 16A / 20A / 25A 2 pole single phase
Cat. II
1
-
-
... More
[b] 32A / 40A, 2 pole Single Phase
Cat. II
8
-
-
... More
Supplying & fixing box for housing ELCB / ELCB + MCB combination made of 18 SWG sheet steel duly powder coated with gasket, dust & vermin proof bakelite shield two earthing terminals for following type of RCCB, ELCB, ELCB + MCB
[a] For 2 Pole
8
-
-
... More
[b] For 4 Pole
1
-
-
... More
Half / One Module Blanking Plate of Standerd Size.
1
-
-
... More
Providing and erecting metallic vitrified danger notice board for MEDIUM VOLTAGE installation to be erected as per IS.
8
-
-
... More
CABLE TRENCH
Marking trench in soft soil of suitable width of 90 cms. Deep for laying cable or locating the fault all over the run and back filling the same and making the surface as normal ground.
2250
-
-
... More
Covering of cable with second class bricks or cement tiles laid cover the cable crosswise & also on both sides with covering of 7.5 cms. Layer of sand above & below cable. (16 bricks per meter).
2250
-
-
... More
Providing and erecting iron clad cable route marker duly marked with ELE. CABLE of size 23cms. X 12cms. Flushed with ground in cement foundation as directed by Engineer in charge.
20
-
-
... More
CABLES
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables a) 4 core 6 Sq. mm
1140
-
-
... More
b) 4 core 10 Sq. mm
4300
-
-
... More
c) 4 core 16 Sq. mm
1800
-
-
... More
d) 4 core 25 Sq. mm
600
-
-
... More
e) 3 1/2 core 35 Sq. mm ( 16 Sq.1/2 mm core)
50
-
-
... More
f) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)
50
-
-
... More
g) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core)
50
-
-
... More
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable.
a) 3 core 2.5Sq. mm
25
-
-
... More
b) 3 core 4 Sq. mm
25
-
-
... More
c) 3 core 6 Sq. mm
25
-
-
... More
d) 4 core 4 Sq. mm
25
-
-
... More
e) 4 core 6 Sq. mm
25
-
-
... More
f) 4 core 10 Sq. mm
25
-
-
... More
g) 4 core 16 Sq. mm
25
-
-
... More
CABLE TERMINATION
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete without going tails, insulating tape etc for following size of cables. Also with Solderless crimping type Aluminium / copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. a) 4 core 6 Sq. mm
152
-
-
... More
b) 4 core 10 Sq. mm
460
-
-
... More
c) 4 core 16 Sq. mm
240
-
-
... More
d) 4 core 25 Sq. mm
80
-
-
... More
e) 3 1/2 core 35 Sq. mm ( 16 Sq.1/2 mm core)
4
-
-
... More
f) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)
4
-
-
... More
g) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core)
4
-
-
... More
h) 3 core 2.5Sq. mm
2
-
-
... More
i) 3 core 4 Sq. mm
2
-
-
... More
j) 3 core 6 Sq. mm
2
-
-
... More
k) 4 core 4 Sq. mm
2
-
-
... More
l) 4 core 6 Sq. mm
2
-
-
... More
m) 4 core 10 Sq. mm
2
-
-
... More
n) 4 core 16 Sq. mm
2
-
-
... More
Solderless crimping type Aluminium lugs confirming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (B) 10 Sq. mm.
30
-
-
... More
(C) 16 Sq. mm.
30
-
-
... More
(D) 25 Sq. mm.
30
-
-
... More
INTERNAL WIRING
Internal Wiring WITH MODULAR TYPE SWITCHES
Wiring of points to be done in open/concealed manner in 25 mm dia medium gauge Rigid PVC FRLS pipe. Wiring shall be done with FRLS type copper flexible wire of 650V/1100V. Separate pipe should be taken for circuit mains. Nos of ciruit of the same phases may be taken in same conduit (maximum 2 ckts).The circuit shall be laid in 25/40 mm dia medium gauge rigid PVC FRLS pipe. The point rate shall include all the necessary piping and wiring from sub panel / Distribution board to switch board & switch board to the batten holder / angle holder / connector / ceiling rose all inclusive except sub panel / Dist board. The wiring shall be done as per relevant prevailing standard. The looping of the wiring should be done in the switch boxes or light and fan point outlet boxes to avoid the junction boxes. The junction boxes and switch boxes for the ceiling light point, fan point etc shall be minimum 60/75 deep. All the necessary jarry in brick plastered walls should be done with machine cutter only , also jarry should be filled with cement, sand and wire mesh as required, the material cost for rough finish shall be included in point rate. Whenever pipes are required to be laid in flooring shall be of heavy guage.Wiring should be done as per distribtion details. Each circuit should have dedicated phase, neutral & earth wire. Wire sizes to be used as under
For Light Points /fan point/ wall fan / 6A 3 Pin Plug
- DB to SB - 2.5sqmm for Phase & Neutral & 1.5 sqmm for Earth
- SB to Point - 1.5 sqmm for Phase & Neutral & Earth
For 6A Plug point.
- 1.5 sqmm for Phase, Neutral & Earth
For 6/10/16A general purpose plug point
- 2.5 sqmm for Phase, Neutral & 1.5 sqmm Earth
For 16A plug point for A/C and Geyser
- 4 Sqmm for Phase, Neutral & 2.5 sqmm Earth
For 20/32A plug point
- 6 sqmm for Phases, Neutral & 4 sqmm Earth
No Jari will be allowed in expose brick work. The conduit shall be provided when the walls are under construction. The pipes in slab shall be laid before the slab is casted.
One light point controlled by one single way 6 A switch.
60
-
-
... More
Loop light point controlled by same switch or SP MCB same as 9.1.1
206
-
-
... More
One light point controlled by two, two way 6 A switch
2
-
-
... More
One ceiling fan outlet point controlled by one 6 A switch and hum free electronic type step regulator.
8
-
-
... More
One 6 A x 5 pin 250 Volt socket outlet point controlled by one 6 A switch located on switch board.
14
-
-
... More
6 A x 5 pin 250 Volt switched socket outlet point at convenient location.
8
-
-
... More
6/16 A x 250 V switch socket point on one switch box with 2.5 sqmm flexible wires and phase and neutral and 1.5 sq nm flexible Cu. wire as earth wire. The rate should include conduiting Upto DB.
47
-
-
... More
6/16A x 250 Volt switched socket outlet point with 4 sq.mm wire for phase and neutral & 2.5 sq.mm earth wire.
1
-
-
... More
6/16A x 250 Volt switched socket outlet point for outside with 4 sq.mm wire for phase and neutral & 2.5 sq.mm earth wire.(outdoor type)
1
-
-
... More
-Do- as above but switch and socket at different location.
1
-
-
... More
Exhaust fan outlet point with 6A 5 pin socket controlled by one 5 single way switch located at different location.
10
-
-
... More
20 A x 250 Volt metal clad socket outlet point with 20 Amp. SPMCB without mains.
5
-
-
... More
6/16A x 250 Volt switched socket outlet point for outside without any mains.(outdoor type)
5
-
-
... More
MAINS :
The mains is considered from the meter/sub panel to the individual distribution boards.
Supplying and Laying mains with 4 nos. of 25 sq mm Cu. FRLS insulated flexible wire with ISI approval for 650 V/ 1100 V and 2 nos 10 sqmm Cu. FRLS insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 40 mm diameter rigid PVC conduit of medium gauge having ISI approval with all necessary accessories.
10
-
-
... More
Supplying and Laying mains with 4 nos. of 16 sq mm Cu. FRLS insulated flexible wire with ISI approval for 650 V/ 1100 V and 2 nos 6 sqmm Cu. FRLS insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 40 mm diameter rigid PVC conduit of medium gauge having ISI approval with all necessary accessories.
10
-
-
... More
Supplying and Providing mains with 4 nos. of 10 sq mm Cu. FRLS insulated flexible wire with ISI approval for 650 V/ 1100 V and 2 nos 4 sqmm Cu. FRLS insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 40 mm diameter rigid PVC conduit of medium gauge having ISI approval with all necessary accessories.
10
-
-
... More
Supplying and Providing mains with 4 nos. of 6 sq mm Cu. FRLS insulated flexible wire with ISI approval for 650 V/ 1100 V and 2 nos 2.5 sqmm Cu. FRLS insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 40 mm diameter rigid PVC conduit of medium gauge having ISI approval with all necessary accessories.
10
-
-
... More
Supplying and Laying mains with 2 nos. of 10 sq mm Cu. FRLS insulated flexible wire with ISI approval for 650 V/ 1100 V and 1 no 6.0 sqmm Cu. FRLS insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 25 mm diameter rigid PVC conduit of medium gauge having ISI approval with all necessary accessories.
10
-
-
... More
Supplying and Providing mains with 2 nos. of 6 sq mm Cu. FRLS insulated flexible wire with ISI approval for 650 V/ 1100 V and 1 nos 4.0 sqmm Cu. FRLS insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 25 mm diameter rigid PVC conduit of medium gauge having ISI approval with all necessary accessories.
150
-
-
... More
Supplying and Providing mains with 3 nos. of 4 sq mm Cu. FRLS insulated flexible wire with ISI approval for 650 V/ 1100 V and be drawn in 25 mm diameter rigid PVC conduit of medium gauge having ISI approval with all necessary accessories.
10
-
-
... More
Supplying and Providing mains with 3 nos. of 2.5 sq mm Cu. FRLS insulated flexible wire with ISI approval for 650 V/ 1100 V and be drawn in 25 mm diameter rigid PVC conduit of medium gauge having ISI approval with all necessary accessories.
10
-
-
... More
Supplying and Providing mains with 3 nos. of 1.5 sq mm Cu. FRLS insulated flexible wire with ISI approval for 650 V/ 1100 V and be drawn in 25 mm diameter rigid PVC conduit of medium gauge having ISI approval with all necessary accessories.
10
-
-
... More
Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required.
(e) One wire 6.00 sq. mm
10
-
-
... More
(f) One wire 10.00 sq. mm
10
-
-
... More
(g) One wire 16.00 sq. mm
10
-
-
... More
(h) One wire 25.00 sq. mm
10
-
-
... More
(m) One wire 120.00 sq. mm
10
-
-
... More
Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked copper wires of following size to be erected as directed. h) 2.50 Sq.mm 3 core round PVC sheathed
1100
-
-
... More
j) 4.00 Sq.mm 3 core round PVC sheathed
250
-
-
... More
(A) Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid material with ignition free & flame proof confirming BS .All necessary accessories and measuring of following sizes with all accessories. (1) 75 mm x 50 mm trunking
10
-
-
... More
(2) 100 mm x 50 mm trunking
10
-
-
... More
LIGHT FIXTURES & FANS
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD 10 %,
CCT 4000 K to 6500K, Uniformity ratio 0.7,
Luminaire efficacy 85 lumens/watt ,
LED driver efficiency 85 %
CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates)
(a) (b) 10-15 watts, Surge-4 KV - Cat-III ( Surface mounted down light as per architect design)
70
-
-
... More
(c) 16-18 Watts, Surge - 4KV,IP-20, 4 feet - Cat-III
64
-
-
... More
(F) Under Water Light,12V DC including Driver,IP-67 with die-cast/deep drawn housing with impact resistance clear toughened glass. (a) 5-8 watts - Cat-III (As per architect design)
88
-
-
... More
Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2 , 3 core flexible wire with earthing. (as per Havells Cat. No. ES 50 PREMIUM or approved equivalent)
8
-
-
... More
Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in RPM [A] 305 mm dia 900 RPM - Cat - II
10
-
-
... More
EARTHING
Supplying & erecting in earthpit of minimum bore dia. 225mm size ASH or approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. [B] For electrical installation up to 11 KV located in other than normal soil i.e. Soft Rock, Marshy soil. etc. - Length of Pipe: 2 Mtr. “- back filling compound: 1 no Bag of 25 Kg.” Back filling Compound: 1no. Bag of 25Kg.
9
-
-
... More
Providing and erecting required size HOT deep Galvanised strip for earthing of H.T. OCB / ACB / Transformer LT panel board, Motors etc. using copper clamp.
150
-
-
... More
Providing and erecting HOT deep Galvanised strip iron wire 8 to 16 S.W.G.
41
-
-
... More
MISCELLANEOUS
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed 25mm Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed 25mm
30
-
-
... More
32mm
30
-
-
... More
40mm
30
-
-
... More
Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cms. below ground across the road crossing or on floor with necessary material in an approved manner and making the ground as per original (A) 250 mm dia
500
-
-
... More
(B)150 mm dia
250
-
-
... More
Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material at required depth for laying of cable. below ground / road surface for enclosing cable and back filling the same to make ground as per original.
(A)50 mm dia
2500
-
-
... More
(B)90 mm dia
1500
-
-
... More
(C)120 mm dia.
1000
-
-
... More
Providing & erecting approved make street light / wall mounting junction box compression moulded from DMC (thermoset plastic) vertical sliding cover having locking with square head stud loop in / loop out in built terminal suitable for four core cable, waterproof of I.P. 54 protected with clamp or bolt nut & earth bolt of following size. FOR OUTDOOR SOCKET INSTALLATION. [A] 200mm x 127mm x 83 mm
10
-
-
... More
[B] 250mm x 194mm x 99 mm
5
-
-
... More
Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S. angles, flats, bars, channels, sections complete with cutting, welding, grinding & finishing duly painted with one coat of red oxide with erection on site as per direction of engineer in charge with necessary grouting, cementing, plastering & finishing complete.
400
-
-
... More
Fabricating the box type items made from M.S. Sheet with A.I. supports, wings, doors, handles other hardware materials as per requirement design with finishing by three tank powder coating processed inside and outside painted, erected as directed including minor civil work.
250
-
-
... More
EXTERNAL LIGHTING
Supply & installation of street light pole with complete with base plate and as per required fixture mounting with foundation as per requirement complete in all respect as per drawing. Junction box shall be in concealed manner (inside the pole) with 1 no 6A SP mcb. 6 way 16A Connector strip suitable to terminate armoured cables. Adequate size cutout with opeanable hinged door should be provided on pole with necessary gasket to ensure water tight arrangement for pulling cables and installation of mcb, connectors etc, complete in all respect as per requirement and instruction of engineer in charge. Scope also includes necessary foundation, earthing, cable entry pipes, 3 core round flexible wire from junction box to light fixture etc,. A) Approx 8.0 Mtr long street light pole Type - A with basic rate of Rs. 55,000/- for street lighting.
10
-
-
... More
B) Approx 4.0 Mtr long, street light pole Type - B with basic rate of Rs. 25,000/- for street lighting
265
-
-
... More
Any kind of External light fixture Type - C with Basic rate of Rs 7,500/-
6
-
-
... More
Any kind of External light fixture Type - D with Basic rate of Rs 15,000/-
6
-
-
... More
Any kind of External light fixture Type - E with Basic rate of Rs 35,000/-
6
-
-
... More
Any kind of external area light fixture Type - F with Basic rate of Rs 22,000/-
341
-
-
... More
Section feeder Pillar ( Outdoor Type) Supplying, unloading at site, shifting to site, assembling, leveling, grouting, erecting, Testing, & Commissioning double compartmentalized Double door type section feeder pillar with IP 54 protection & should be powder coated fabricated from 14 Gauge CRCA sheet & folded channel totally enclosed cubical type with pad lock arrangement. The successful tenderer will have to prepare general arrangement with dimensions & get it approve through Architect/ Consultant. All civil work including RCC platform for section pillar should be in scope of Electrical contractor complete in all respect as per detail drawing and directed by engineer incharge. As per SLD
3
-
-
... More
32 A x 415 V plug & socket with interlocked switched socket, FP MCB and surface mounting box IP 66 with DIN rail for 5 module equivalent to legrand make Cat no.56674 but without cost of wiring and piping. Scope also includes necessary foundation, cable entry pipes, earthing etc complete in all respect as per drawing
10
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements