Planning And Development Department Tender

Providing and filling rubbles including hand packing and filling interstices with quarry spalls behind abutments and between returns as directed., etc. as directed by the Engineer-In-Charge complete.

Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and getting out the soil and disposal of the surplus excavated soil as directed within a lead of 50 Meter for following diameter of pipes.(iii) 300 mm, etc. as directed by the Engineer-In-Charge complete.

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete including cost of formwork, compacting, finishing, curing etc complete for all level, all height/ depth in (A) Foundation and Plinth, etc. as directed by the Engineer-In-Charge complete.

Providing and laying in position Ready Mixed M25 grade concrete for reinforced cement concrete work, using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying in Foundations, footings, Base of columns and Mass concrete, including cost of admixtures in recommended proportions as per IS: 9103 as per direction of the EIC. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) Including cost of Formwork with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and removal of form for in situ reinforced concrete and plain concrete work in with all lead and lift complete, etc. as directed by the Engineer-In-Charge complete.

Providing and laying in position Ready Mixed M25 grade concrete for reinforced cement concrete work, using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying in Walls, including cost of admixtures in recommended proportions as per IS: 9103 as per direction of the EIC. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) Including cost of Formwork with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and removal of form for in situ reinforced concrete and plain concrete work in with all lead and lift complete, etc. as directed by the Engineer-In-Charge complete.

Providing and laying in position Ready Mixed M25 grade concrete for reinforced cement concrete work, using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying in Slabs, landing, shelves, Balconies, Lintels, Beams, Girders and Cantilever upto floor two level., including cost of admixtures in recommended proportions as per IS: 9103 as per direction of the EIC. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) Including cost of Formwork with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and removal of form for in situ reinforced concrete and plain concrete work in with all lead and lift complete, etc. as directed by the Engineer-In-Charge complete.

Providing and laying controlled cement concrete M-250 for R.C.C. bored piles of required diameter including ramming, vibrating and finishing complete for reinforced cement concrete work, using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , etc. as directed by the Engineer-In-Charge complete.

Supplying, cutting, bending, binding and placing in position TMT Bar Fe 500D reinforcement in all diameter confirming to relevant I.S. standards as per ISS 2502 and IS 1786 including cost of binding with GI wires and placing in position complete upto floor two level inluding Providing anticorrosive treatment to HYSD/Fe 500D bars with FUSION BONDED EPOXY COATING (FBEC) confirming to IS13620:1993 at approved plant including testing of coating as per relevant IS, before bringing the coated bars on site including To & Fro transportation of bars for sending at plant site etc. complete, for HYSD bars. (Brands: Tata, Jindal), etc. as directed by the Engineer-In-Charge complete.

Providing material and Labour for Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand) Conventional in any shape and thickness including finishing, racking of joints, curing, scaffolding for all height all level , etc. as directed by the Engineer-In-Charge complete.

Providing and laying integral cement based water proofing treatment conforming to IS: 2645 for treatment of underground watertank, etc: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound over the RCC slab including adjoining walls including cleaning the surface before treatment. b) Laying brickbats 25 mm to 115 mm size with 50% of cement mortar 1:5 admixed with water proofing compound over 20 mm thick layer of cement mortar of mix 1:5 admixed with water proofing compound to required slope and treating similarly the adjoining walls upto 300 mm height rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed jointless cement mortar of mix 1:4 admixed with water proofing compound conforming to IS : 2645 and approved by EIC.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by EIC including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) Curing tank with water flooded for min. 2 weeks, including 10 years of warranty for waterproofing. All above operations to be done in order and as directed and specified by the EIC with average thickness of 120 mm and minimum thickness at khurra as 65 mm., etc. as directed by the Engineer-In-Charge complete.

Prov. & Laying Wall Dado of 300 mm x 200 mm x 8 mm / 300 mm x 450 mm x 8 mm WaterTank Area Matt/ Glosy Finished Tiles 8 mm tiles Dado ,Skirting,Riser laid on bed of 10mm (Average) base of Cement Mortar 1:3 (1-Cement : 3 Coarse Sand) on new surface and jointed with white /colour cement slurry including filling ,finished with flush pointing & cleaning the surface all lead & lift etc. completed of any shade approved by Higher Authority of approved brands like Somani, AGL, Marbito, etc. including all material, labour, etc. as directed by the Engineer-In-Charge complete.

Fabrication work for Pump house shed of size approx. 23.30 sq.mt. (M.S. square pipe (40 x40 x 5, 32x 32x 5), MS Plate, MS Gate, Anchor bolts, 75mm screw, UPVC sheet, pre-coated GI sheet complete in all respects i/c enamel paint / PU polish/ Red-oxide as per the design and drawing, Ventilation, Door, foundation for heat pump and filters with necessary platform and all modification required to the site, all electrical connection with tube light and fan, painting work, door, ventilation, All flooring with Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing above all mentioned work will be executed, etc. including all material, labour, etc. (make: JSW, Tata, etc.) as directed by the Engineer-In-Charge complete.

Supply & Installation of WPC Panel 146 x 21 mm Deck plank of approved make to be fitted on aluminium joist framework , Framework to be fitted on levellled floor with intervals not exceeding 350mm c/c with all required accessories as per direction of EIC. Composite plank fitted on joist with SS clip Fastened with Screw (Make: Everwood Composite) including 10 years warranty for the installed WPC deck including replacement of any damaged, faded, spoiled, marred, dented component, etc. and Comprehensive AMC including all material, labour, etc. as directed by the Engineer-In-Charge complete.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(ii) Inside dimensions 500mm x 700 mm and 450mm deep for pipe line with one or two inlets including all material, labour, etc. as directed by the Engineer-In-Charge complete.

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall/underground using of PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls/underground as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials, labour, etc. as directed by the Engineer-In-Charge complete.

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board having IP-64 protection made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary supporting angles, flats including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection, supplied switch gears, BUSBARS, with suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient Nos. of hinged doors, handles with locking arrangement, MCCB, MCB Distrbution Panel, PVC Pipes, Earthing Electrod, Copper Strip Earthing, Panel Wire 1mm, 2.5 mm, 4mm, Armoured Cable, PVC Trunking and rubber gasket complete. The Panel shall be painted with epoxy powder coating. (The rates includes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall be supplied with following approved manufacturers as per attached SLD - MAIN LT Panel (160A FP MCCB WITH ELR AS INCOMER AND 25 Nos X 32A DP MCB AS OUT GOING with RYB ON-OFF-Trip Lamps and Multi function meter with CT, etc. as directed by the Engineer-In-Charge complete.