Planning And Development Department Tender

Carrying out plinth treatment to post construction / existing structure by spraying chemical solution for termite control treatment including labour and material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II Concentration Weight one percent is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 % concentration inclusive of one litre chemical emulsion application at the rate of 5 Litre chemical / Sqm of surface is recommended as per I.S, including all material labour all leads and lifts transportation etc. complete as directed by Engineer-in-charge.

Providing material and labour for laying Plain cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6- crushed stone aggregates 20 mm Nominal size) in Foundation, Plinth, Pavement, Road work including cost of formwork, compacting, finishing, curing etc complete for all level, all height/ depth as directed including all material labour etc. complete as directed by Engineer In-Charge.

Providing and laying in position Ready Mixed M25 grade concrete for reinforced cement concrete work for 150mm thick Raft Grade Slab, using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying in Foundation, footings, base of columns, pavement, grade slab, roads and Mass concrete all work upto plinth level, including cost of admixtures in recommended proportions as per IS: 9103 as per direction of the EIC. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) Including cost of Formwork with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and removal of form for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.exluding cost of reinforcement etc. complete as directed by Engineer-In-Charge.

Providing and laying in position Ready Mixed M25 grade concrete for reinforced cement concrete work 150mm thick RCC Shear Wall, using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying in Beams, Plinth beam, Girders, Lintels and Cantilever all work above plinth and upto floor V level including cost of admixtures in recommended proportions as per IS: 9103 as per direction of the EIC. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) including cost of Formwork with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and removal of form for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge. Height of propping and centering below supporting floor to ceiling Not exceeding 4.0 M.,including all material and labour etc. complete as directed by engineer in charge.

Supplying, cutting, bending, binding and placing in position TMT Bar Fe 500D reinforcement in all diameter confirming to relevant I.S. standards as per ISS 2502 and IS 1786 including cost of binding with GI wires and placing in position complete upto floor two level inluding Providing anticorrosive treatment to HYSD/Fe 500D bars with FUSION BONDED EPOXY COATING (FBEC) confirming to IS13620:1993 at approved plant including testing of coating as per relevant IS, before bringing the coated bars on site including To & Fro transportation of bars for sending at plant site etc. complete, for HYSD bars. (Brands: Tata, Jindal) etc. complete as directed by Engineer-in-charge.

Providing and laying integral cement based water proofing treatment conforming to IS: 2645 for treatment of roofs, balconies, terraces etc: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brickbats 25 mm to 115 mm size with 50% of cement mortar 1:5 admixed with water proofing compound over 20 mm thick layer of cement mortar of mix 1:5 admixed with water proofing compound to required slope and treating similarly the adjoining walls upto 300 mm height rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed jointless cement mortar of mix 1:4 admixed with water proofing compound conforming to IS : 2645 and approved by EIC.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by EIC including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) Curing terrace with water flooded for min. 2 weeks. All above operations to be done in order and as directed and specified by the EIC with average thickness of 120 mm and minimum thickness at khurra as 65 mm.,as directed by engineer in charge.

Providing & Laying Wall Dado of approved make and approved colour and approved pattern of 600mm x 300mm or 600mm x 600mm Toilet Area Matt/ Glosy Finished Vitrified Tiles 8 mm tiles Dado , Skirting, Riser laid on bed of 10mm (Average) base of Cement Mortar 1:3 (1-Cement : 3 Coarse Sand) on new surface and jointed with white /colour cement slurry including filling ,finished with flush pointing & cleaning the surface all lead & lift etc. completed of any shade approved by Higher Authority of approved brands like Somani, AGL ,Marbito etc., including all material, labour etc. complete as directed by Engineer-in-charge.

Filter Make: USA ( PENTIAR ) Bobbin wound Filter 960mm Diameter with 2" Side mount Valve and internals SKU : BWF-36-2SM Lacus Filters are FRP bobbin wound filters for swimming pool applications Max. Working Pressure-3.5 Bar Factory Testing Pressure-4.5 Bar Max. Operating Temp.-50ºC MOC-Filament wound with Isolthalic resin UV protection. FRP Liner Filter Colours-Brown Beige Base Colour -Black Warranty-5 years for shell Make: Pentair SR NO - 202302202661 including all material, labour, installtion, fixing etc. complete as per drawing and as directed by Enineer-in-charge.

Filter Media (Grade 2 nd 3) Supplying of super sharp with fine edge silica Media- Per 50 Kg. including all leads and lifts etc. complete as directd by Engineer-In-charge.

Recirculation Pump Make: USA ( PENTAIR ) Pentair Whisperflo Pump - 3Hp - 2,20 kW - monophase Pentair Whisperflo Pump - 3Hp - 2,20 kW - monophase SKU : P-WFL-301 WhisperFlo® costs less to operate, because it delivers higher performance with lower power consumption. Specially-engineered design assures whisperquiet operation. Oversized strainer basket extends time between cleanings. See-through user-friendly Cam and Ramp™ lid makes inspection fast and easy - easy to remove and quickly locks in place with a quarter-turn. Advanced FunnelFlo™ diffuser and high-efficiency impeller maximize water flow and energy efficiency while minimizing turbulence and noise. Easy installation and trouble free servicing. Corrosion resistant, high-grade stainless steel motor shaft. Make: Pentair HSN: 84137010 etc. complete including all material labour installation etc. complete as per drawing and as directed by Engineer-in-charge.

Base Drain ABS MAKE : USA ( PENTAIR ) Supply of 300 x300 mm Square polyester frame & ABS grill Only. 33 Cu mtr /hr etc. complete including all material, labour, installtion etc. complete as per drawing and as directed by Engineer-in-charge.

Return Inlet MAKE : USA ( PENTAIR ) Supply of Adj Floor Inlet -2" threaded connection- Flow 10m3/h with topsurface to match with tile floor including all material, labour installation etc. complete as per drawing and as directed by Engineer-in-charge.

Vacuum Point MAKE : USA ( PENTAIR ) Supplying of Vacuum Point & Plug - ABS - 2" / 1 1/2" threaded connection including all material, labour, installation etc. complete as directed by engineer-in-charge.

Overflow Grating channel MAKE : INDIAN Supplying of Overflowgrating channel -size 300 mm X 25 mm ( Quality - PPCP + UV ) Material quality : * PPCP+UV : Poly poplin copolimar + UV stabilizer mixed. * And this is Reliance make Plastic quality. * the colour doses get faded nor it from any power

Underwater ABS body Light Make: AMOGHA Supplying of 36W X 12V LED Light cool white/warm white (1yr warrenty) 1. ABS BODY SWIMMING POOL LIGHT 2. LED ADITION POWER LED 3. Thickness 40mm 4. WIRE POLLY CAB 1 MTR. 2 x 1.5mm2.. 5. DRIVER INDIAN / MAKE IN INDIA 6. DIA 11inch 8. VOLTAGE: single colour 12V X 18W / AC 10. REPLACEMNET GAURANTEE OF 1 YEARS. 11. IP68 WATER PROOF including all material, labour, installation etc. complete as per drawing and as directed by Engineer-in-charge.

SMPS / DRIVERS Supplying Driver(Suitable for Use with Lights) IP65 including supply installation etc. complete as per drawing and as directed by Engineer-in-charge.

Ladder MAKE : USA-PENTAIR Supplying of 3 Steps Standard Ladder - Supplying of stainless steel ladder 3 step made of SS304 with non slip surface, 500mm wide with hand rails.Over flow type including all material, labour, installation, fixing etc. complete as per drawing and as directed by Engineer-in-charge.

Supplying of 2 Tread Standard Ladder - Supplying of stainless steel ladder 2 step made of SS304 with non slip surface, 500mm wide with hand rails.Over flow type including supply, instaalation as per drawing and as directed by Engineer-in-charge

Vacuum Hose MAKE : USA-PENTAIR Supplying of 1.5" (38mm) Floating Hose Spiralwound 2 color - 30 Metre including supply, installation etc. complete as per drawing and as directed by Engineer-in-charge.

Wall Brush MAKE : USA-PENTAIR Supplying of 18" Plastic/Aluminium Brush including supply, installation etc. complete as per drawing and as directed by Engineer-in-charge.

Algae brush MAKE : USA-PENTAIR Supplying of 10" Steel Algae Brush including supply, installation etc. complete as per drawing and as directed by Engineer-in-charge.

Deep Net MAKE : USA-PENTAIR Supplying of Deep Net including supply, installation etc. complete as per drawing and as directed by Engineer-in-charge.

Flat Net MAKE : USA-PENTAIR Supplying of Flat Net including supply, installation etc. complete as per drawing and as directed by Engineer-in-charge.

Telescopic Pole MAKE : USA-PENTAIR Supplying of 4.8m Long telescopic Handle including supply, installation etc. complete as per drawing and as directed by Engineer-in-charge.

Vacuum Head MAKE : USA-PENTAIR Supplying of 18" Vacuum Head Flexible with Swivel +Spring Clip Handle including supply, installation etc. complete as per drawing and as directed by Engineer-in-charge.

Test Kit MAKE : USA-PENTAIR Supplying of Test kit (Liquid) for pH and Chlorine- including supply, installation etc. complete as per drawing and as directed by Engineer-in-charge.

Ball Valve Dia 63 mm UPVC Ball Valve with both side union of approved make including supply installation, fixing etc. complete including all material ablour as per drawing and as directed b y Engineer-in-charge.

Check Valve Make: Dia 63 mm UPVC Spring Check Valve with both side union of approved make including supply installation, fixing etc. complete including all material ablour as per drawing and as directed by Engineer-in-charge.

Piping and fitting chg (1 lot) PIPING SIZE : - 63MM, 75MM, 90MM, 110MM, 50MM. All pipeing and fitting will be in 10 kg pressure GREY PVC PIPING (Make : PRINCE/ASTRAL) including supply installation, fixing etc. complete including all material ablour as per drawing and as directed b y Engineer-in-charge.

Heat & Chill Pump 56 KW, SKU: Heat Pump - PASRW130S-U, Vertical with Titanium tube in PVC heat exchanger, Scroll Compressor power suplly 380-415V/3P/50Hz. R410a , Make Pantair including supply installation, fixing etc. complete including all material ablour as per drawing and as directed b y Engineer-in-charge.

SWIMMING POOL LIGHTS CABLE ONLY & fittings : - eletricical conduits, elbow, waterproof sheet, electrical tape, connection from lights to cable only (1 lot) MAKE : - POLYCAB /RR including supply installation, fixing etc. complete including all material ablour as per drawing and as directed b y Engineer-in-charge.