Omnibus Industrial Development Corporation Limited Tender
View complete overview of Daman & Diu OIDC Tender
Omnibus Industrial Development Corporation Limited - OIDC Tender
Coronavirus COVID 19
Eprocure
Opening Date18 Jan 2019
Closing Date31 Jan 2019
Tender Amount₹ 37,23,31,204
Costs
EMD
₹ 47,23,312Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_DAMAN_227_1Bid Award Id
ViewTender No
OIDC/DMN/CD/2019/744Tender Authority
Omnibus Industrial Development Corporation Limited ViewPurchaser Address
-Website
http://ddtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Earthwork in cuting in all sorts of soil and soft murrum including conveying and spreading the stuff, embankment as and where directed within 200meters from the end of the cutting with all required lead and lift. (A) All types of Soil
40113.75
-
-
Scarifying gravelled macadam or bitumen macadam surface 6 cm to 10 cm.depth including stacking useful materials on road side and disposing off remaining stuff.
2804.5
-
-
Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and consolidating etc. complete as directed by engineer in charge. . (for Construction of Subgrade and Earthen Shoulders with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2)
8677.625
-
-
Plant Mix Method (Providing, laying, spreading and compacting 380 mm thk. graded stone aggregate material in sub base course including mixing in a mechanical mix plant at OMC , carriage of mix material, spreading in uniform layers with motor grader for sub base including spreading of stone dust to fill up voids on the surface and watering compacting with vibratory roller to achieve CBR value not less than 30 as per MORTH and the desired density (as per designed mix determined density) including all materials, labour, machinery.etc completed. as per clause 401 ) - Grading II 1st & 2nd Layer
3471.05
-
-
Providing and Laying 250 mm thick [in two equal layer] of wet mix macadam of using machine crushed chips as per required gradation mixing with required optimum quantity of water conveting the mix to site and camber with mechanically paver, consolidation with vibratory road rolling including materials. etc completed as directed by Engineer In charge. WMM 1st Layer & 2nd Layer
8302.76
-
-
Providing and Applying Evenly Priming Tack Coat on WMM surface with Emulsion SS1 @ 9 Kg/10 M2 including cost asphalt, heating and the cost of spraying uniformly complete as directed..
46040.5
-
-
Providing and Laying compacted 75mm thick dense graded bituminious macadam (DBM) Grade-2 in single layer using 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour, tack coat at the rate of 2.5 Kg / 10 m2 in each using crushed aggregates of specified grading premixed with bituminious content @ 4.5% (VG-30) by weight of total mix and filler, transporting the hot mix to work site laying with a hydrostatic paver finisher with sensor control with minimum road width or as directed by Engineer in charge to the required grade, level and alignment, rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification etc complete in all respects. The agency shall have to get the mix design done from approved laboratory and submit to the Engineer in charge for Approval. If the asphalt (bituminious) content is more than above, the agency shall have to bear the cost of additional asphalt. The payment shall be done on the permissible field density achieved on the ite instead of density derieved in the mix design. (Assume density = 2.40 gms / cm3)
8287.29
-
-
Providing and Laying 50mm thick Bituminious Concrete using crushed stone aggregate BT chips as per required gradation and using emulsion asphalt as a tack coat @ 2.5 Kg / 10 sqm and the VG-30 grade asphalt at 5.40% (i.e. 54 Kg/ MT) by total weight of mix hot laid process using drum mix plant including heating and mixing asphalt & materials by drum mix process transporting the mix and laying by paver finisher including consolidation with vibratory roller & PTR including cost of material labour machinary equipment and fuel, oil, lubricant for plant and machinary using contractor's own plant and machines etc complete. The agency shall have to get the mix design done from approved laboratory and submit to the Engineer in charge for approval. If the asphalt (bituminious) content is more than above, the agency shall have to bear the cost of additional asphalt. Thhe payment shall be done on the permissible field density achieved on the site instead of density derieved in the mix design. (Assume Density = 2.45 gms / cm3)
6942.32
-
-
Applying bituminous paint VG-30 @ 6 kg / 10 sq.mt incl heating the bitumen and sparying by tanker etc completed .
23447.76
-
-
Mastic Asphalt (Providing and laying 25 mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-29, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumen precoated fine-grained hard stone chipping of 13.2 mm nominal size at the rate of 0.005cum per 10 sqm and at an approximate spacing of 10 cm center to center in both directions, pressed into surface when the temperature of surfaces not less than 1000C, protruding 1 mm to 4 mm over mastic surface, all complete as per clause 515.)
1902
-
-
Removal of Unserviceable Soil with Disposal (Removal of unserviceable soil including excavation, loading and disposal as per directed but excluding replacement by suitable soil which shall be paid sperately as per clause) (Total 30 % Qty Calculated for Excavation Work)
3000
-
-
Providing and laying of Hot applied Thermoplastic compound 2.5 mm thick including Reflectorising Glass Beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35 & finished surface to be level, uniform and free from streaks and holes. (As per Government letter No.SOR 102003/94/S-1/ Dated.20-7-2004)
1939.31
-
-
Providing and fixing ordinary Kilometer stone of precast C.C. 1:2:4 including necessary reinforcement as per I.R.C. type design in C.C. 1:4:8 including letter and paints etc. complete (For N.H., S.H. and M.D.R.)
7
-
-
Cautionary Warning Sign :-Providing and fixing sing boards made out of 2mm aluminium sheet; size 90 x 90 x 90 cms. equilateral triangle as per design of IRC-67-1977. Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with retro refiectivesheeting as per latest M.O.S.T.Specifications; 3.1m long stand postand frame fabricated from suitable sizeiron angle of 35 x 35 x 3mm, 75 x 75 x 6mm as required; painted with bestquality epoxy coatings in black andwhite bends. The details of symbol foreach board shall be as per theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including excavation, curing etc.complete under the supervision of engineer in charge.(B) High Intensity Grade.
25
-
-
Regulatory/Mandatory signs :Providing and fixing sing boards made out of 2mm aluminium sheet; size 60cms. diameter circle as per the design of IRC-67-1977 pre treated with phospheting process & acid eteching; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with retro refiective sheeting as per latest M.O.S.T. Specifications; 3.1m long stand post and frame fabricated from suitable size iron angle of 35 x 35 x 3mm 75x75x6mm as required; painted with best quality epoxy coatings in black and white bends. the details of symbol for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including excavation curing etc. complete under the supervision of engineer in charge.(B)High Intensity Grade .
25
-
-
Providing and fixing Three Dimensional Signanges (As per Drawing)
5
-
-
Supplying and Fixing Cat Eye (Stimsonite) made out of Acrilo beautile sterine injection high compressed moulding with reflector made out of MMC (Prismatic type size 12cm X 6cm X 2.5cm) provided with the bitumenous adhesive 100g with each unit for fixing (Engineer Grade)
4032
-
-
Providing Precast Exposed Finish CC Street Furniture - Bollard of M250 grade concrete. Min. 5 sides of the block (except 1 side consisting of the bottom face in joinery while fixing) must be Exposed finish. No superficial surface treatment shall be allowed in any circumstances.
2073.5
-
-
Providing and Fixing of Precast Exposed Finish CC Street Furniture - Seats of size 2000 (L) x 300 (W) x 300 (H) mm with back rest made of 10mm thick MS and supported by 8mm thick MS plate. The back rest is fixed to the bollard with 10mm thick and 100mm wide MS plate and nuts-bolts.
60
-
-
Providing and Fixing of Precast Exposed Finish CC Street Furniture - Dustbins of 250 grade concrete. Minimum 5 sides of the block (except 1 side consisting of the bottom face in joinery while fixing) must be exposed concrete. No superficial surface treatment shall be allowed in any circumstances.
60
-
-
Providing and fixing REF TG-2 GREY 75mm with minimum average 200 kg/cm2 compressive strength at 28 days
1738
-
-
Providing and fixing pre-cast inter locking concrete block 60mm thick with grade of concrete M200 pnumatic compressed by mechanically pressed and as per approved design. Approved Make : Vyara or Equivalent.
12292.5
-
-
Excavation for foundation upto 1.5 mt. depth including sorting out and stacking of useful materials and disposing of the excavated stuff within the estate [A]loose or soft soil.
18287.36
-
-
P/L cement concrete 1:3:6 [1 cement :3 coarse sand : 6 m/c stone aggregates 40 mm nominal size] and curring completr including cost of form work in : [a] foundation and plinth
1547.475
-
-
providing and Laying controlled cement concrete M 250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in [A] Foundations, footings, base of columns and Mass concrete.
842.3325
-
-
Providing & constructing of RCC walls for the storm water drain woth RCC M250 ordinary cement concrete and finishing smooth with centering & shuttering in true line and level etc. but excluding cost of reinforcement for RCC work & including the cost of necessary formwork in [B] verticle and orizontalits upto floor to level.
2662.83
-
-
providing and laying controlled cement concrete M250 and curing complete including the cost of formwork and excluding the cost of reinforcement for reinforced concrete work in (c ) Slab, landing, shelves, balconies, lintels,beams, girders.
841.71
-
-
Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 450 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 50 mm thick in PCCM20 grade, sloped towards the kerb, kerb stone with channel laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408
5970
-
-
Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for culverts including setting and joining the pipes in C.M. 1:2 watering and laying (To level of slops of I.S. 458 / 1971 Class NP4 of following internal diameter. (ii) 450 mm dia.
2076
-
-
Painting Two Coats on New Concrete Surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces)
5347.07
-
-
Construction of Chambers in brick or bela stone masonry, locally available in C. M. 1:6. Foundation concrete 150 mm thick in C. C. 1:4:8 of trap metal size 25 mm to 40 mm thick, inside cement plaster in C. M. 1:3 and cement pointing outside in C. M. 1:3 and top cover of precast RCC slab M250 grade of 150 mm thick (with key hole in two parts, each with handles or MS Bar etc. complete as given size) Upto 1 Mt. depth from G. L. to pipe invert level incl. complete civil works incl. cost of excavation and refilling, with cast in situ RCC slab in one single piece with fixing of heavy duty (20 ton capacity) CI-MH Frame and cover (incl. cost of CI-MH Frame and cover) with 23 mm thick brick masonry wall in C.M.1:6
60
-
-
providing and laying ISI mark TMT bar Fe 415 reinforcement for all RCC work incluing bending, binding and placing in position complete upto floor two level etc. complete
620000
-
-
Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.
6030
-
-
Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. for brick work in superstructure above plinth level upto floor two level (A) Modularin Cement Mortar 1:5. (1- Cement : 5 -fine sand)(A) Modular (upto 10 ton)
31.11
-
-
Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (i)Cement mortar 1:3 (1-cement:3-sand)
67.64
-
-
Providing and laying in position Ready Mixed M-200 grade concrete for reinforced cement conctere work , using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, including the cost of centering shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 400 kg )
129.6
-
-
Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and consolidating etc. complete as directed by engineer in charge.
6600
-
-
Supplying and fixing of factory made Precast FT-Flume for Utility trench units of 2000mm length,top in to in width 1200 mm, in to in height of 1500 mm etc. Product should be confirming to Indian Standard requirements,having live load on wall sides T-25 i.e 1 T/M2made by using advanced precast technology having High Performance Self Compacting Concrete of M-40 cylinder strength/M- 50 cube strength and using Fe 500D reinforcement bar.The product shall have tie shape groove of 12-18 mm width X 16 mm depth as per IS on both sides of each precast unit product for jointing two precast units using cement mortar or suitable non shrink grout. The product should have flange coupling jointing arrangements, one each at bottom & both the side walls, at appropriate location for shear connection between two products.For Utility trench intake inside sloping slit of about 42 mm (H) X 200 mm (W) should be provided on one of the side wall at about 1m c/c along the road side face of the product.Provision of drainage hole(200 mm dia RCC pipes as per design and drawing) should be made in the product for avoiding buoyancy and releasing the pressure of the surrounding water in case of intensively heavy rain fall areas. The precast FT-Flumeshould have special provisions at appropriate location for mechanical installation, including supply, transportation, on specific location at site in line, level, gradient and plumb with necessary testing commissioning etc. complete as per instruction of engineer in charge. Size for 1200mm x 1500mm.
5035
-
-
Providing & laying factory made precast chamber Lid having size of 1000 mm X 1400 mm X 100 mm thick, suitable for placing on FT- Flume 1200 mm (w), T-4 load carrying capacity (pedestal load) confirming to Indian Standard having High Performance Self Compacting Concrete of M-40 cylinder strength/ M-50 cube strength and having anti-skid finish at top with specially designed lifting inserts of appropriate load carrying capacity and fixed at specific location to avoid the tilting of the lid for safe & faster installation. The Fe 500D shall be used for reinforcement. The precast Lid must consist special arrangement at appropriate location for mechanical installation including supply, transportation, at site in line, level ,gradient and plumb with necessary testing commissioning etc. complete as per instruction of engineer-in-charge.
5035
-
-
Providing,supplying and lowering, laying and jointing in proper position. grade and alignment in CM 1:1.5 ISI standerd reinforced concrete (RCC) heavy duty non-pressure pipes of sulphate resisting cement I.S. (D) class NP3 of the following internal diameter with collars and butt ends prepared for collar joints/rubbering joint including testing of joints complete including all taxes, transportation, freight, octroi, inspection charges, loading, unloading, staking hydraulic testing etc. as directed by EIC.(B) 150mm
2500.5
-
-
WATER SUPPLY LINE FOR DOMESTIC/FLUSHING ) Providing and supplying D.I. K-9 grade pipes for following nominal bore diameter with internal cement mortar lining including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to store, stacking etc.complete. 80 mm dia
-
-
-
Providing and supplying D.I. K-9 grade pipes for following nominal bore diameter with internal cement mortar lining including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to store, stacking etc.complete 110 mm dia
-
-
-
Providing and supplying D.I. K-9 grade pipes for following nominal bore diameter with internal cement mortar lining including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to store, stacking etc.complete 160 mm dia
-
-
-
Manufacture, supply and delivery of Ductile iron flange, socket, spigot, bends, tees, reducer or any other specials as per BN-EN-545/1995 Class-A series K12 suitable for use with D.I. Pipes manufactured as per IS:8329-1994 delivery of specials is to be made to store or sitesof works Inculdes all taxes, loading carting, unloading, stacking, insurance, octori, inspection charge etc. complete.
1
-
-
Lowering, laying and jointing of C. l./DI for M. S. specials oI following diameters in proper positlon, grade and alignment as dlredsd qy Engineer-incharge including conveyancs from stores lo site of work, labour, giving hydrulic testing etc comp. 80 mm dia
-
-
-
Lowering, laying and jointing of C. l./DI for M. S. specials oI following diameters in proper positlon, grade and alignment as dlredsd qy Engineer-incharge including conveyancs from stores lo site of work, labour, giving hydrulic testing etc comp. 110 mm dia
-
-
-
Lowering, laying and jointing of C. l./DI for M. S. specials oI following diameters in proper positlon, grade and alignment as dlredsd qy Engineer-incharge including conveyancs from stores lo site of work, labour, giving hydrulic testing etc comp.160 mm dia
-
-
-
Topographic Survey with all the details( Dabhel Industrials Estate)
117830
-
-
Excavation for Pipeline Trenches including all safety provisions using site rails and stacking excavated stuff up to lead of 90 Mtrs. Cleaning the site etc. complete for lifts and strata as specified In all sort of Soil and soft murrum Up to 1.5 Mtr. Depth
2100.04
-
-
Excavation for Pipeline Trenches including all safety provisions using site rails and stacking excavated stuff up to lead of 90 Mtrs. Cleaning the site etc. complete for lifts and strata as specified In all sort of Soil and soft murrum Up to 1.5 to 3 Mtr. Depth
157.04
-
-
Excavation for Pipeline Trenches including all safety provisions using site rails and stacking excavated stuff up to lead of 90 Mtrs. Cleaning the site etc. complete for lifts and strata as specified In all sort of Soil and soft murrum Up to 3 to 4.5 Mtr. Depth
67.22
-
-
Dewatering for excavation in wet condition and in all strata 3 to 4.5 Mtr. Depth for vacuum station (Base Slab)
268.88
-
-
Refilling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m For HDPE Vacuum Line and Discharge Pipe
1570.7
-
-
Providing bedding including ramming watering copnsolidating etc. complete, (F) Sand 2 to 15 KM
246.345
-
-
Close Timbering over areas including strutting , shoring and packing cavities (wherever required ) etc. complete (measurements taken of the face area timbered
74.69
-
-
Providing and casting ln situ mass cement concrete in grade M-10 using granite quatzite trap metal of size 12 mm to 25 mm including consolidation curing etc. complete with Form work
122.35
-
-
providing and laying controlled cement concrete M250 and curing complete including the cost of formwork and excluding the cost of reinforcement for reinforced concrete work in (c ) Slab, landing, shelves, balconies, lintels,beams, Columns girders.
44.61
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars
4
-
-
Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand)
96.55
-
-
15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall.
867.31
-
-
Providing and fixing panelled or panelled and glazed shutters for Doors , windows and clerestory windows, including ISI marked MS pressed butt hinges bright finish of required size with necessary screws , excluding panelling second class teakwood 35 mm thick shutters
1.89
-
-
Providing and Fixing mosquito mesh to windows or ventilators including cost of all materials, labour charges complete
1
-
-
Finishing Walls with water proofing cement paint of required shade
103.89
-
-
Providing and Supplying &fixing in standard length ISI marked high density polyethylene HDPE pipes (PE-100) suitable for Sewage and Inductrial effluents as per IS specification no. IS 14333:1996 including all local and central taxes, transportation, freight charges, octroi , inspection charges , loading, unloading , conveyance to the departmental stores etc. complete PE 100, PN 10 (i) 90 mm
190
-
-
Providing and Supplying &fixing in standard length ISI marked high density polyethylene HDPE pipes (PE-100) suitable for Sewage and Inductrial effluents as per IS specification no. IS 14333:1996 including all local and central taxes, transportation, freight charges, octroi , inspection charges , loading, unloading , conveyance to the departmental stores etc. complete PE 100, PN 10 110 mm
142.5
-
-
Providing and Supplying &fixing in standard length ISI marked high density polyethylene HDPE pipes (PE-100) suitable for Sewage and Inductrial effluents as per IS specification no. IS 14333:1996 including all local and central taxes, transportation, freight charges, octroi , inspection charges , loading, unloading , conveyance to the departmental stores etc. complete PE 100, PN 10 125 mm
237.5
-
-
Providing and Supplying &fixingin standard length ISI marked high density polyethylene HDPE pipes (PE-100) suitable for Sewage and Inductrial effluents as per IS specification no. IS 14333:1996 including all local and central taxes, transportation, freight charges, octroi , inspection charges , loading, unloading , conveyance to the departmental stores etc. complete PE 100, PN 10 160 mm
430
-
-
Providing and Supplying &fixing HDPE Fittings HDPE Coupler - Electrofusion (1) 90 mm
27
-
-
Providing and Supplying &fixing HDPE Fittings HDPE Coupler - Electrofusion 110 mm
20
-
-
Providing and Supplying &fixing HDPE Fittings HDPE Coupler - Electrofusion 125 mm
34
-
-
Providing and Supplying &fixing HDPE Fittings HDPE Coupler - Electrofusion 160 mm
61
-
-
Providing and Supplying &fixing HDPE 45 Elbow - Electrofusion 90 mm
38
-
-
Providing and Supplying &fixing HDPE 45 Elbow - Electrofusion 110 mm
29
-
-
Providing and Supplying &fixing HDPE 45 Elbow - Electrofusion 125 mm
48
-
-
Providing and Supplying &fixing HDPE 45 Elbow - Electrofusion 160 mm
86
-
-
Providing and Supplying &fixing HDPE Reducer - Electrofusion 110 X 90
4
-
-
Providing and Supplying &fixing HDPE Reducer - Electrofusion 125 x 110
3
-
-
Providing and Supplying &fixing HDPE Reducer - Electrofusion 160 x 125
4
-
-
Providing and Supplying &fixing HDPE Reducer - Electrofusion 200 x 160
8
-
-
Providing and Supplying &fixing HDPE End Cap - Electrofusion 90 mm
4
-
-
Providing and Supplying &fixing HDPE End Cap - Electrofusion 110 mm
3
-
-
Providing and Supplying &fixing HDPE End Cap - Electrofusion 125 mm
5
-
-
Providing and Supplying &fixing HDPE End Cap - Electrofusion 160 mm
9
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 90 MM 15 CMS HEIGHTS
15
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 90 MM 30 CMS HEIGHTS
15
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 90 MM 55 CMS HEIGHTS
15
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 90 MM 70 CMS HEIGHTS
15
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 90 MM 90 CMS HEIGHTS
15
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 110 MM 15 CMS HEIGHTS
25
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 110 MM 30 CMS HEIGHTS
25
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 110 MM 55 CMS HEIGHTS
25
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 110 MM 70 CMS HEIGHTS
25
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 110 MM 90 CMS HEIGHTS
25
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 125 MM 15 CMS HEIGHTS
9
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 125 MM 30 CMS HEIGHTS
9
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 125 MM 55 CMS HEIGHTS
9
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 125 MM 70 CMS HEIGHTS
9
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 125 MM 90 CMS HEIGHTS
9
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 160 MM 15 CMS HEIGHTS
10
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 160 MM 30 CMS HEIGHTS
10
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 160 MM 55 CMS HEIGHTS
10
-
-
Providing and Supplying &fixing HDPE "Y" Fitting - Butt Weld 110 X 110 X 110
50
-
-
Providing and Supplying &fixing HDPE "Y" Fitting - Butt Weld 125 X 125 X 110
35
-
-
Providing and Supplying &fixing HDPE "Y" Fitting - Butt Weld 160 X 160 X 110
30
-
-
Providing and Supplying &fixing HDPE "Y" Fitting - Butt Weld 200 X 200 X 110
20
-
-
Providing and Supplying &fixing HDPE "Y" Fitting - Butt Weld 200 X 200 X 160
15
-
-
Providing Electrofusion Welding of Joints Number of Joints
808
-
-
Providing and Supplying &fixing in standard length ISI marked rigid unplasticised PVC pipes suitable for potable water with ringfit joint including cost of rings as per IS specification no. IS 4985:1988 including all local and central taxes , transportation, freight charges, octroi , inspection charges , loading, unloading , conveyance to the departmental stores and including cost of jointing material etc. complete Outer dia. in mm, 6 KG/CM2 (1) 110 mm
248
-
-
Providing and Supplying &fixingin standard length ISI marked rigid unplasticised PVC pipes suitable for potable water with ringfit joint including cost of rings as per IS specification no. IS 4985:1988 including all local and central taxes , transportation, freight charges, octroi , inspection charges , loading, unloading , conveyance to the departmental stores and including cost of jointing material etc. complete Outer dia. in mm, 6 KG/CM2 (2) 160 mm
992
-
-
Providing and Supplying &fixing site of work including freight charges, loading, unloading , stacking, all taxes etc. complete 90° Elbow 110 mm
41
-
-
Providing and Supplying &fixing site of work including freight charges, loading, unloading , stacking, all taxes etc. complete 90° Elbow 160mm
165
-
-
Providing and Supplying &fixing Coupler 110mm
83
-
-
Providing and Supplying &fixing Coupler 160mm
330.67
-
-
Providing and Supplying &fixing Reducer 160mm-110mm
20
-
-
Providing and Supplying &fixing Tee 110mm
2
-
-
Providing and Supplying &fixing Tee 160mm
10
-
-
Providing and Supplying &fixing End Cap 110mm
5
-
-
Providing and Supplying &fixing End cap 160mm
20
-
-
Providing and Supplying &fixing Heavy Duty Frame and Covers (ISI marked - CI) 560 mm Dia with 208 kg
40
-
-
Providing and Supplying &fixing Heavy Duty Frame and Covers (ISI marked - CI) 600mm x 600 mm with weight 100 kg
93
-
-
Providing and Supplying &fixing Heavy Duty Frame and Covers (ISI marked - CI) 600mm x 900 mm with weight 245 kg
31
-
-
Supplying and installing Intercepting Sewer Traps
93
-
-
Providing and Supplying &fixing Nod. GIJ, spindle S.S. valve rubber coated, suitable for indoor installation with hand wheel (Gate Valves)ND 200 PN10 (Incoming main line)
1
-
-
Providing and Supplying &fixing ND 110 PN10 (pressure side)
2
-
-
Providing and Supplying &fixing ND 150 PN10 (suction side)
2
-
-
Providing and Supplying &fixing Ball check valves with rubber coated sinking ball for vacuum tanks and sewage discharge mains for indoor fixture ND 110 PN10 (pressure side)
2
-
-
Providing and Supplying &fixing ND 150 PN10 (suction side)
2
-
-
Providing and Supplying &fixing Valves of type Nod. GIJ, Valve rubber coated, suitable for underground installation, with hand wheel and placed in chamber, Located on strategic points in the system ND 110PN10 (flange)
8
-
-
Providing and Supplying &fixing Valves of type Nod. GIJ, Valve rubber coated, suitable for underground installation, with hand wheel and placed in chamber, Located on strategic points in the systemND 125PN10 (flange)
8
-
-
Providing and Supplying &fixing Valves of type Nod. GIJ, Valve rubber coated, suitable for underground installation, with hand wheel and placed in chamber, Located on strategic points in the system ND 160PN10 (flange)
10
-
-
Providing and Supplying &fixing Vacuum pumps, oil cooled type. The pumps are skid mounted, including gas ballast valve, PVC water separator, PVC manifold with 2 pressure-switches, 1 vacuum gauge, float level switches for sewage level, exhaust SS piping etc 500 m3/hour each,Motor : 7.5 kw each,Voltage : 230/400V (soft starter) Frequency : 50 Hz
3
-
-
Providing and Supplying &fixing On the vacuum chamber there are in total 2 pieces dry mounted sewage pumps. Second pump is full reserve and running alternate including explosion proof execution appendages as foot holder, cable, stainless steel guide rail, etc.Capacity : 75 m3/hr ,Motor : 10 kw each,Frequency : 50 Hz,Head : 20.4 m
2
-
-
Providing and Supplying &fixing of Horizontal vacuum tank for indoor installation. Material : pressure vessel steel Shell thickness : 12 mm Volume : ± 10 m3 Manhole : 900 mmdia Flange : for level switches : 1 level switch Level controller : 4 x Float switches
1
-
-
Providing and Supplying &fixing of Control panel for vacuum central. - Housing cabinet - Programmable Logic Controlled panel Provided with: Display Main switch Running counter for each pump Switch for each pump Lamps for running and failures Lamp for phase failure Including software and electrical drawing package and suitable for 3 vacuum pumps and 2 sewage pumps. PLC control panel provided with OMRON PLC which is standard Touch screen allows the operator on site itself to have visual information about status of vacuum station. On screen is shown the failures (incl. time of occurring) and level of vacuum tank and the operator has the possibility to change manually some settings e.g. running time.
1
-
-
Providing and Supplying &fixing Vacuum Valve Units including Interface Valve "Piston Type", controller unit and Accessories
40
-
-
Providing and Supplying &fixing Leak Proof Precast Chamber
40
-
-
Providing and Supplying &fixing Valve Monitoring Unit with Scada Valve monitoring transmitter
40
-
-
Supply,Installation,Testing & Commissioning of Diesel Generator Set (50 KVA capacity) with AMF Panel & Shed as directed by Engineer-In-Charge.
1
-
-
Providing and Supplying &fixing of Spare Parts for 5 years
1
-
-
Operations & Preventive Maintenance Excluding Electricity for 5 Years
1
-
-
Sewage Treatment Plant based on Moving Bed Boi Reactor (MBBR) Technology Modular or Designing, providing, constrcucting, hydraulic testing, commissioning and giving satisfactorily trails of STP consisting of Inlet Chamber, fine and coarse Screen chamber, anoxic tank for denitrification, moving bed bio reactors (MBBR), secondary clarifier unit, unit for removal of total phosporus, color, provision for UV/ chlorinen, provison for dewatering , digestion and collection of the sludge, provision of all necessary equipments for collection , transportation , pumping etc. provison of diversion of Sewer line to STP, holding sump, and foundation required for STP. All civil work related to Pathways, compound Wall, Tools and Plants, complete as turnkey job with all involved civil , electrical, instrumentation and mechanical works includive of following items, units as per detailed specifications for civil , electrical, mechanical components with all duties and taxes etc. complete to achieve BOD 10 ppm, COD 50 ppm, TSS 10 ppm, Biological TN 10 ppm & TP 2 ppm, oil and greese nil, E-coli nil and odour less effluent to get recyclable quality of water for Industrial / agricultural purposes. All units shall be interconnected with administration building by suitable or RCC overhead walkways.
Capacity: 0.2 MLD
1
-
-
Providing Topographic Survey with all the details (Ringanwada Industrial Estate)
144882
-
-
Excavation for Pipeline Trenches including all safety provisions using site rails and stacking excavated stuff up to lead of 90 Mtrs. Cleaning the site etc. complete for lifts and strata as specified In all sort of Soil and soft murrum Up to 1.5 Mtr. Depth
5090.09
-
-
Excavation for Pipeline Trenches including all safety provisions using site rails and stacking excavated stuff up to lead of 90 Mtrs. Cleaning the site etc. complete for lifts and strata as specified In all sort of Soil and soft murrum 1.5 to 3 Mtr. Depth
152.54
-
-
Excavation for Pipeline Trenches including all safety provisions using site rails and stacking excavated stuff up to lead of 90 Mtrs. Cleaning the site etc. complete for lifts and strata as specified In all sort of Soil and soft murrum 3 to 4.5 Mtr. Depth
67.22
-
-
Dewatering for excavation in wet condition and in all strata 3 to 4.5 Mtr. Depth for vacuum station (Base Slab)
268.88
-
-
Refilling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m For HDPE Vacuum Line and Discharge Pipe
3878.98
-
-
Providing bedding including ramming watering copnsolidating etc. complete, (F) Sand 2 to 15 KM
405.45
-
-
Close Timbering over areas including strutting , shoring and packing cavities (wherever required ) etc. complete (measurements taken of the face area timbered
74.69
-
-
Providing and casting ln situ mass cement concrete in grade M-10 using granite quatzite trap metal of size 12 mm to 25 mm including consolidation curing etc. complete with Form work
307.8
-
-
providing and laying controlled cement concrete M250 and curing complete including the cost of formwork and excluding the cost of reinforcement for reinforced concrete work in (c ) Slab, landing, shelves, balconies, lintels,beams, Columns girders.
44.61
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars
4
-
-
Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand)
326.75
-
-
15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall.
3188.03
-
-
Providing and fixing panelled or panelled and glazed shutters for Doors , windows and clerestory windows, including ISI marked MS pressed butt hinges bright finish of required size with necessary screws , excluding panelling second class teakwood 35 mm thick shutters
1.89
-
-
Providing and Fixing mosquito mesh to windows or ventilators including cost of all materials, labour charges complete
1
-
-
Finishing Walls with water proofing cement paint of required shade
103.89
-
-
Providing and Supplying &fixing in standard length ISI marked high density polyethylene HDPE pipes (PE-100) suitable for Sewage and Inductrial effluents as per IS specification no. IS 14333:1996 including all local and central taxes, transportation, freight charges, octroi , inspection charges , loading, unloading , conveyance to the departmental stores etc. complete PE 100, PN 10 (i) 90 mm
350
-
-
Providing and Supplying &fixing in standard length ISI marked high density polyethylene HDPE pipes (PE-100) suitable for Sewage and Inductrial effluents as per IS specification no. IS 14333:1996 including all local and central taxes, transportation, freight charges, octroi , inspection charges , loading, unloading , conveyance to the departmental stores etc. complete PE 100, PN 10 , 110 mm
262.5
-
-
Providing and Supplying &fixing in standard length ISI marked high density polyethylene HDPE pipes (PE-100) suitable for Sewage and Inductrial effluents as per IS specification no. IS 14333:1996 including all local and central taxes, transportation, freight charges, octroi , inspection charges , loading, unloading , conveyance to the departmental stores etc. complete PE 100, PN 10, 125 mm
437.5
-
-
Providing and Supplying &fixing in standard length ISI marked high density polyethylene HDPE pipes (PE-100) suitable for Sewage and Inductrial effluents as per IS specification no. IS 14333:1996 including all local and central taxes, transportation, freight charges, octroi , inspection charges , loading, unloading , conveyance to the departmental stores etc. complete PE 100, PN 10, 160 mm
750
-
-
Providing and Supplying &fixing HDPE Fittings HDPE Coupler - Electrofusion (1) 90 mm
50
-
-
Providing and Supplying &fixing HDPE Fittings HDPE Coupler - Electrofusion 110 mm
38
-
-
Providing and Supplying &fixing HDPE Fittings HDPE Coupler - Electrofusion 125 mm
63
-
-
Providing and Supplying &fixing HDPE Fittings HDPE Coupler - Electrofusion 160 mm
107
-
-
Providing and Supplying &fixing HDPE 45 Elbow - Electrofusion 90 mm
70
-
-
Providing and Supplying &fixing HDPE 45 Elbow - Electrofusion 110 mm
53
-
-
Providing and Supplying &fixing HDPE 45 Elbow - Electrofusion 125 mm
88
-
-
Providing and Supplying &fixing HDPE 45 Elbow - Electrofusion 160 mm
150
-
-
Providing and Supplying &fixing HDPE Reducer - Electrofusion 110 X 90
6
-
-
Providing and Supplying &fixing HDPE Reducer - Electrofusion 125 x 110
5
-
-
Providing and Supplying &fixing HDPE Reducer - Electrofusion 160 x 125
8
-
-
Providing and Supplying &fixing HDPE Reducer - Electrofusion 200 x 160
14
-
-
Providing and Supplying &fixing HDPE End Cap - Electrofusion 90 mm
7
-
-
Providing and Supplying &fixing HDPE End Cap - Electrofusion 110 mm
5
-
-
Providing and Supplying &fixing HDPE End Cap - Electrofusion 125 mm
9
-
-
Providing and Supplying &fixing HDPE End Cap - Electrofusion 160 mm
16
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 90 MM 15 CMS HEIGHTS
15
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 90 MM 30 CMS HEIGHTS
15
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 90 MM 55 CMS HEIGHTS
15
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 90 MM 70 CMS HEIGHTS
15
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 90 MM 90 CMS HEIGHTS
15
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 110 MM 15 CMS HEIGHTS
25
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 110 MM 30 CMS HEIGHTS
25
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 110 MM 55 CMS HEIGHTS
25
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 110 MM 70 CMS HEIGHTS
25
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 110 MM 90 CMS HEIGHTS
25
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 125 MM 15 CMS HEIGHTS
9
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 125 MM 30 CMS HEIGHTS
9
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 125 MM 55 CMS HEIGHTS
9
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 125 MM 70 CMS HEIGHTS
9
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 125 MM 90 CMS HEIGHTS
9
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 160 MM 15 CMS HEIGHTS
10
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 160 MM 30 CMS HEIGHTS
10
-
-
Providing and Supplying &fixing HDPE Pockets - Butt Weld 160 MM 55 CMS HEIGHTS
10
-
-
Providing and Supplying &fixing HDPE "Y" Fitting - Butt Weld 110 X 110 X 110
50
-
-
Providing and Supplying &fixing HDPE "Y" Fitting - Butt Weld 125 X 125 X 110
35
-
-
Providing and Supplying &fixing HDPE "Y" Fitting - Butt Weld 160 X 160 X 110
30
-
-
Providing and Supplying &fixing HDPE "Y" Fitting - Butt Weld 200 X 200 X 110
20
-
-
Providing and Supplying &fixing HDPE "Y" Fitting - Butt Weld 200 X 200 X 160
15
-
-
Electrofusion Welding of Joints Number of Joints
1114
-
-
Providing and Supplying &fixing in standard length ISI marked rigid unplasticised PVC pipes suitable for potable water with ringfit joint including cost of rings as per IS specification no. IS 4985:1988 including all local and central taxes , transportation, freight charges, octroi , inspection charges , loading, unloading , conveyance to the departmental stores and including cost of jointing material etc. complete Outer dia. in mm, 6 KG/CM2 (1) 110 mm
732
-
-
Providing and Supplying & fixing in standard length ISI marked rigid unplasticised PVC pipes suitable for potable water with ringfit joint including cost of rings as per IS specification no. IS 4985:1988 including all local and central taxes , transportation, freight charges, octroi , inspection charges , loading, unloading , conveyance to the departmental stores and including cost of jointing material etc. complete Outer dia. in mm, 6 KG/CM2 160 mm
2928
-
-
Providing and Supplying & fixing site of work including freight charges, loading, unloading , stacking, all taxes etc. complete 90° Elbow 110 mm
122
-
-
Providing and Supplying fixing site of work including freight charges, loading, unloading , stacking, all taxes etc. complete 90° Elbow 160mm
488
-
-
Providing and Supplying fixing Coupler 110mm
244
-
-
Providing and Supplying fixing Coupler 160mm
976
-
-
Providing and Supplying fixing Reducer 160mm-110mm
59
-
-
Providing and Supplying fixing Tee 110mm
7
-
-
Providing and Supplying fixing Tee 160mm
29
-
-
Providing and Supplying fixing End Cap 110mm
15
-
-
Providing and Supplying fixing End Cap 160mm
59
-
-
Providing and Supplying fixing Heavy Duty Frame and Covers (ISI marked - CI) 560 mm Dia with 208 kg
36
-
-
Providing and Supplying fixing Heavy Duty Frame and Covers (ISI marked - CI) 600mm x 600 mm with weight 100 kg
366
-
-
Providing and Supplying fixing Heavy Duty Frame and Covers (ISI marked - CI) 600mm x 900 mm with weight 245 kg
122
-
-
Supplying and installing Intercepting Sewer Traps
366
-
-
Providing and Supplying &fixing Nod. GIJ, spindle S.S. valve rubber coated, suitable for indoor installation with hand wheel (Gate Valves)ND 200 PN10 (Incoming main line)
1
-
-
Providing and Supplying &fixing Nod. GIJ, spindle S.S. valve rubber coated, suitable for indoor installation with hand wheel (Gate Valves) ND 110 PN10 (pressure side)
2
-
-
Providing and Supplying &fixing Nod. GIJ, spindle S.S. valve rubber coated, suitable for indoor installation with hand wheel (Gate Valves) ND 150 PN10 (suction side)
2
-
-
Providing and Supplying &fixing Ball check valves with rubber coated sinking ball for vacuum tanks and sewage discharge mains for indoor fixture ND 110 PN10 (pressure side)
2
-
-
Providing and Supplying &fixing Ball check valves with rubber coated sinking ball for vacuum tanks and sewage discharge mains for indoor fixture ND 150 PN10 (suction side)
2
-
-
Providing and Supplying &fixing Valves of type Nod. GIJ, Valve rubber coated, suitable for underground installation, with hand wheel and placed in chamber, Located on strategic points in the system ND 110PN10 (flange)
8
-
-
Providing and Supplying &fixing Valves of type Nod. GIJ, Valve rubber coated, suitable for underground installation, with hand wheel and placed in chamber, Located on strategic points in the system ND 125PN10 (flange)
8
-
-
Providing and Supplying &fixing Valves of type Nod. GIJ, Valve rubber coated, suitable for underground installation, with hand wheel and placed in chamber, Located on strategic points in the system ND 160PN10 (flange)
10
-
-
Supplying and installing Vacuum pumps, oil cooled type. The pumps are skid mounted, including gas ballast valve, PVC water separator, PVC manifold with 2 pressure-switches, 1 vacuum gauge, float level switches for sewage level, exhaust SS piping etc 250 m3/hour each,Motor : 7.5 kw each,Voltage : 230/400V (soft starter) Frequency : 50 Hz
3
-
-
Suppiling and installing total 2 pieces dry mounted sewage pumps. Second pump is full reserve and running alternate including explosion proof execution appendages as foot holder, cable, stainless steel guide rail, etc.Capacity : 75 m3/hr ,Motor : 10 kw each,Frequency : 50 Hz,Head : 20.4 m
2
-
-
Providing and Supplying &fixing of Horizontal vacuum tank for indoor installation. Material : pressure vessel steel Shell thickness : 12 mm Volume : ± 10 m3 Manhole : 900 mmdia Flange : for level switches : 1 level switch Level controller : 4 x Float switches
1
-
-
Providing and Supplying &fixing of Control panel for vacuum central. - Housing cabinet - Programmable Logic Controlled panel Provided with: Display Main switch Running counter for each pump Switch for each pump Lamps for running and failures Lamp for phase failure Including software and electrical drawing package and suitable for 3 vacuum pumps and 2 sewage pumps. PLC control panel provided with OMRON PLC which is standard Touch screen allows the operator on site itself to have visual information about status of vacuum station. On screen is shown the failures (incl. time of occurring) and level of vacuum tank and the operator has the possibility to change manually some settings e.g. running time.
1
-
-
Suppiling and installing Vacuum Valve Units including Interface Valve "Piston Type", controller unit and Accessories
36
-
-
Suppiling and installing Leak Proof Precast Chamber
36
-
-
Suppiling and installing Valve Monitoring Unit with Scada Valve monitoring transmitter
36
-
-
Providing and Installating Diesel Generator Set (50 KVA capacity) with Shed
1
-
-
Providing and Supplying &fixing of Spare Parts for 5 years
1
-
-
Operations & Preventive Maintenance Excluding Electricity for 5 Years
1
-
-
Sewage Treatment Plant based on Moving Bed Bio Reactor (MBBR) Technology Modular or Designing, providing, constrcucting, hydraulic testing, commissioning and giving satisfactorily trails of STP consisting of Inlet Chamber, fine and coarse Screen chamber, anoxic tank for denitrification, moving bed bio reactors (MBBR), secondary clarifier unit, unit for removal of total phosporus, color, provision for UV/ chlorinen, provison for dewatering , digestion and collection of the sludge, provision of all necessary equipments for collection , transportation , pumping etc. provison of diversion of Sewer line to STP, holding sump, and foundation required for STP. All civil work related to Pathways, compound Wall, Tools and Plants, complete as turnkey job with all involved civil , electrical, instrumentation and mechanical works includive of following items, units as per detailed specifications for civil , electrical, mechanical components with all duties and taxes etc. complete to achieve BOD 10 ppm, COD 50 ppm, TSS 10 ppm, Biological TN 10 ppm & TP 2 ppm, oil and greese nil, E-coli nil and odour less effluent to get recyclable quality of water for Industrial / agricultural purposes. All units shall be interconnected with administration building by suitable or RCC overhead walkways.
Capacity: 0.2 MLD
1
-
-
(LANDSCAPE IRRIGATION SYSTEM ) Providing and fixing Air release valve as per design & drawing, as per directed by engineer incharge.
-
-
-
Providing and fixing Hydrant unit as per design & drawing, as per directed by engineer incharge.
-
-
-
Providing and fixing spray pop-up 02-04 mtr radius as per design & drawing, as per directed by engineer incharge.
-
-
-
Providing and fixing 20 mm 6kg/cm2 Pvc Agri ISI Pipes
300
-
-
Providing and fixing 25 mm 6kg/cm2 Pvc Agri ISI Pipes
500
-
-
Providing and fixing 32 mm 6kg/cm2 Pvc Agri ISI Pipes
700
-
-
Providing and fixing 40mm 6kg/cm2 Pvc Agri ISI Pipes
1100
-
-
Providing and fixing 50mm 6kg/cm2 Pvc Agri ISI Pipes
2000
-
-
Providing and fixing 65mm 6kg/cm2 Pvc Agri ISI Pipes
30
-
-
Providing and fixing 50 mm Ball valve as per design & drawing, as per directed by engineer incharge.
24
-
-
Providing and fixing Vave box 10” as per design & drawing, as per directed by engineer incharge.
24
-
-
Providing and fixing 20 mm Ball valve with hose connection as per design & drawing, as per directed by engineer incharge.
60
-
-
Providing and fixing 40mm Ball valve as per design & drawing, as per directed by engineer incharge.
50
-
-
Providing and fixing 50mm Ball valve as per design & drawing, as per directed by engineer incharge.
6
-
-
Providing and fixing 65 mm Butter fly valve as per design & drawing, as per directed by engineer incharge.
6
-
-
Providing and fixing Valve box 6” as per design & drawing, as per directed by engineer incharge.
6
-
-
Providing and fixing 1.25" flush valve as per design & drawing, as per directed by engineer incharge.
60
-
-
Providing and fixing Inline 16mm irrigation pipe as per design & drawing, as per directed by engineer incharge.
2000
-
-
Providing and fixing Rotor sprinkler 9-10mt radius as per design & drawing, as per directed by engineer incharge.
180
-
-
Providing and fixing Swing joint as per design & drawing, as per directed by engineer incharge.
230
-
-
Providing and fixing Service saddle as per design & drawing, as per directed by engineer incharge.
230
-
-
Providing and fixing Pvc +drip+Teflon+solvent cement +upvc fittings as per design & drawing, as per directed by engineer incharge.
1
-
-
Transportation charges
1
-
-
Installation ,supervision and commissioning charges
1
-
-
Trenching and backfilling of soil as directed by EIC
6000
-
-
Providing and fixing Solenoid valve 2" rain bird as per design & drawing, as per directed by engineer incharge.
50
-
-
Providing and fixing valve box 7" as per directed by engineer incharge.
50
-
-
Providing and fixing controller rain bird as per directed by engineer incharge.
2
-
-
Providing and fixing casing pipe 32 mm 10 kg/cm2 as per directed by engineer incharge.
960
-
-
Providing and fixing active cable 2.5sq mm as per directed by engineer incharge.
3500
-
-
Providing and fixing Automatic control panel as per directed by engineer incharge.
2
-
-
( FOR ENTERANCE GATE) Excavation for foundation upto 1.5 mt. depth including sorting out and stacking of useful materials and disposing off the excavated stuff all lead & lift. [B] Dense or Hard Soil
-
-
-
Providing & Laying cement concrete 1:2:4 [1- Cement : 2-coarse sand : 4- graded stone aggregates 20 mm nominal size] and curing complete excluding cost of formwork in [A] Foundation & Plinth.
-
-
-
Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering.
18.83
-
-
Supply & fixing factory finished cold formed Light guage steel frame sections confirming to SP:6 (5) 1980 at site or work including riveted, bolted or welded in builtup for all type of sections ,in framed work, cutting, hoisting, fixing in position and applying primer coat of approved steel primer etc. complete as per structural designs & directions of Engineer-in-charge.
25760
-
-
Supply and install of 3 mm thick solid aluminum panels for external cladding using aluimum sheet of alloy 6063-t6, powder coated with pvdf coating , the aluimum sheets are to be mounted on aluminum tide frame work in ray form , the gap beyween between the metal panels is to be filled with weather proff silcione and backer rfod, the cost of sheeting would include bending, forming,hardware clamps and installation
257.6
-
-
Providing and fixing SITC of SS 304 glossy LED backlite in Line & level with necessary spaccesors, tools & tackles required including scaffolding required with driver installed in IP 65 rating casing box etc. complete. SS 304 Arial Black font height 250 mm
23
-
-
Providing and fixing SITC of SS 304 glossy LED backlite in Line & level with necessary spaccesors, tools & tackles required including scaffolding required with driver installed in IP 65 rating casing box etc. complete. SS 304 Arial Black font height 200 mm
16
-
-
Providing and fixing SITC of SS 304 glossy LED backlite in Line & level with necessary spaccesors, tools & tackles required including scaffolding required with driver installed in IP 65 rating casing box etc. complete. SS 304 Arial Black font height 300 mm
8
-
-
Providing and fixing SITC of SS 304 glossy LED backlite in Line & level with necessary spaccesors, tools & tackles required including scaffolding required with driver installed in IP 65 rating casing box etc. complete. SS 304 Logo as per drawing
7.63
-
-
Providing and fixing T.M.T (Thermo Mechanically Treated) bars confirming to relevant IS Fe 415 grade for R.C.C. works including bending, binding and placing in position etc. incl. cost of binding wire etc. complete up to floor two level .
-
-
-
providing and Laying controlled cement concrete M 250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in [A] Foundations, footings, base of columns and Mass concrete.
7
-
-
providing and laying controlled cement concrete M250 and curing complete including the cost of formwork and excluding the cost of reinforcement for reinforced concrete work in (c ) Slab, landing, shelves, balconies, lintels,beams, girders.up to floor two level
8
-
-
providing and laying controlled cement concrete M250 and curing complete including the cost of formwork and excluding the cost of reinforcement for reinforced concrete work in (D ) Column, Pillers up to floor two level
11.3
-
-
Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. for brick work in superstructure above plinth level upto floor two level (A) Modularin Cement Mortar 1:5. (1- Cement : 5 -fine sand)(A) Modular (upto 10 ton)
14
-
-
Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand broken stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth (upto 10 ton)as per the drawing etc., all complete and as directed by Engineer Incharge. (APPROX QTY IF REQUIRED AS PER SITE CONDITION)
1.8
-
-
Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (i)Cement mortar 1:3 (1-cement:3-sand)
59
-
-
Providing 20 mm thick double coat mala cement plaster on interior brick / concrete work for plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including scaffolding curing etc. complete.
81
-
-
Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick (upto 10 ton)
18
-
-
External wall painting (two coats pf priming coat + two coats of paint) with APEX exterior paint of Asian paints or equivalent of required shade or equivalent including a priming coat of primer of approved brand and manufacture on wall & any other surfaces to give an even shade after thoroughly brushing the surface & making the surface free from mortar droppings and other foreign matter and sand papered smooth incl. filling the all small holes, cracks, open joints, undulations and similar other minor defects of every kind with ready made putty of approved brand and manufacture and rubbed smooth with sand paper incl. nece. scaffoldings etc. complete at all floor levels.
60.68
-
-
(FOR ARBODICULTURE )Providing and laying Garden Soil loading, Carting & unloading charges.
1638
-
-
Providing and Plantation of semi carpet lawn the scope includes prepad ground for planting of lown, soil spreading, mixing of soil & manuare, rolling the same etc comp.Labour cost for lawn Plantation Sami carpet lawn cost including carting, loading & unloading at site etc and includes required dose of pesticides & Antitermte tretment Labour charges for maintenance of semi carpet lawn including tools & tackels.
2730
-
-
Providing & plantation of green belt trees by digging of pit size 0.6 x 0.6 x 0.6 feet, adding soil, farm yard manuar, DAP, pesticide, plantation of sapling. Making proper tree basin & putting proper support.
508
-
-
Annual Mainteanance contract for fully developed Garden , the scope includes to provide required men power, tools, tackles, pesticiedes, fertilizer cleaning and housekeeping etc. comp. -5th year
2730
-
-
Supply of shrubs - saplings, well developed, well branched, preferably in bloom, in polybag of 30x20cm size, disease free and development including excavation upto 450mm deep (Type S2 with nursery sale price between Rs. 26 and upto Rs. 50)(Poly bag size - 10"x 12" and height 2 5' - 3' feet)
4000
-
-
(Community Centre) Excavation for foundation upto 1.5 mt. depth including sorting out and stacking of useful materials and disposing off the excavated stuff all lead & lift. [B] Dense or Hard Soil
408
-
-
Providing & Laying cement concrete 1:2:4 [1- Cement : 2-coarse sand : 4- graded stone aggregates 20 mm nominal size] and curing complete excluding cost of formwork in [A] Foundation & Plinth.
40
-
-
Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering.
368
-
-
Supply & fixing factory finished cold formed Light guage steel frame sections confirming to SP:6 (5) 1980 at site or work including riveted, bolted or welded in builtup for all type of sections ,in framed work, cutting, hoisting, fixing in position and applying primer coat of approved steel primer etc. complete as per structural designs & directions of Engineer-in-charge.
7000
-
-
Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead complete excluding the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick sheet. (upto 10 ton)
300
-
-
Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(A) Modular (upto 10 ton)
126
-
-
Providing, machine mixing and laying 75mm thk plain cement concrete (PCC) 1:4:8 (1 cement: 2 coarse sand: 4 graded stone aggregate) for foundation, rafts and levelling course etc.; including compacting, curing, required shuttering and its removal, dewatering where required, cleaning, preparing surfaces, junctions, etc.; complete at all depths and leads as per the drawing etc., all complete and as directed by Engineer Incharge. (APPROX QTY IF REQUIRED AS PER SITE CONDITION)
80
-
-
Providing and applying in one coat, 12-25mm thick plaster on internal surface of RCC / brick / block walls in cement mortar 1:4, finished rough to take on POP punning. Rate shall include for scaffolding, making grooves, sills, pattas, curing, surface preparation before the application of plaster, providing galvanized chicken mesh to a width of 150 mm at the junctions of masonry and concrete works including tying in position by using suitable nails / clamps / screws and as directed etc. complete at all levels. The contractor shall make good the grooves, pockets etc. after the scaffolding is removed.
320
-
-
Providing & fixing of 18mm thk machine cut mirror polished approved Granite double jamb, in required shape with required grooves, mouldings, chamfereing/rounding edges, polished etc. also includes required pins/ cram etc. for holding down complete including fixing with approved adhesive (bal or laticrite) pointing, curing, cleaning, polishing etc. complete to the approval of EIC. (basic rate of Granite 75/- sft)
200
-
-
Providing & fixing 175mm band 18mm thk machine cut mirror polished approved Granite single jamb, in required shape with required grooves, mouldings, chamfereing/rounding edges, polished etc. also includes required pins/ cram etc. for holding down complete including fixing with approved adhesive (bal or laticrite) pointing, curing, cleaning, polishing etc. complete to the approval of EIC. (basic rate of Granite 75/- sft)
14
-
-
Providing & Making 4mmx4mm, 2 nos grooves in staricase area with curing, cleaning, polishing etc. complete to the approval of EIC.
14
-
-
Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick (upto 10 ton)
276
-
-
Installation of door frame as per the design & detail and as directed by Engineer incharge.
8
-
-
Providing & cutting tile for Nahni trap as per the design & detail and as directed by Engineer incharge.
8
-
-
Providing & fixing of 3 track sliding window (18mm series) 18 gauge aluminium section (Jindal make) finished with approved powder coating color. This is to consist of wire mesh panel as per detail design. The rate to include reflective glass fixed with gaskets with all necessary hardwares and complete as directed by Engineer incharge.
32
-
-
Providing and Applying waterproofing at terrace area in following parts as per the specifications listed below and as approved by the engineer-in-charge: Breaking & removing existing waterproofing treatment with china chips and carting away the debris. TERRACE SLAB Providing andApplying waterproofing and slope-
300
-
-
Providing and fixing platform of 600mm width (clear) and at 810 height (top) above ffl. of approved 19mm thk. granite with champhered and machine polished edge .It shall be supported on 38mm thk. vertical cudappah at 750mm/900mm c/c. a 50 mm granite fascia shall be provided below the champhered edge. rate shall be inclusive of fixing cutouts and polishing the edges for sink / washbasin without drain board (medium) and providing s. s. nirali sink./ basin with bottle trap. Rate shall also include one jaquar continental c. p. sinkcock with casted spout rate shall also be inclusive of cudappah item. Cost of Polished Granite Rs.120 /Sft
14
-
-
Providing 20 mm thick double coat mala cement plaster on interior brick / concrete work for plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including scaffolding curing etc. complete. (For Pumping Station)
380
-
-
(FALSE CEILING WORKS )Providing and fixing Gypsum False Ceiling of India Gypsum make which includes G.I. Perimeter Channels of size 0.55mm thick (having One Flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall / partition with the help of Nylon sleeves and screws at 610mm centres. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two flanges of 15mm each) from the soffit at 1220mm centres with ceiling angle of width 25mm X 10mm X 0.55mm thick fixed to soffit with G.I. cleat and steel expansion fasteners. Ceiling section of 0.55mm thick having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 457 mm centres. 12.5mm tapered edge Gypboard (conforming to IS 2095-1982) is then screw fixed to ceiling section with 25mm dry wall Philips screws at 230mm centres. Screw fixing is done mechanically with drilling machine with suitable attachment. Finally tapered edges of the Gyp boards are to be jointed and finished so as to have a flush look which includes filling and finishing with jointing compound, joint paper tape and two coats of dry wall top coat suitable for Gypboard (as per recommended practice of BPB India gypsum) etc complete as per the recommended practices of India Gypsum. Rate to be included all kinds of profiles and cut outs required for light fixtures, Speakers, Smoke detector, trap doors and AC grill in the ceiling if required. All steel sections to be marked with "GYPSTEEL" which is a registered trademark of BPB IGL and hologram. The rate to consist of the cove as per the drawings and as directed by Engineer incharge.
320
-
-
Providing and applying punning up to 12mm thick layer of super fine Plaster of Paris applied over selected existing plastered surface on walls and columns finished smooth, inclusive of surface preparation, including all incidentals, making grooves 6mm wide in the POP at the junction/end of walls or as directed, pattas, sills, etc. complete. The finished surface should be smooth and in perfect level so as to avoid unevenness and ready to take on paint etc. as directed by Engineer-in-charge. Gypsum india make or Equivalent. (APPROX QTY IF REQUIRED AS PER SITE CONDITION)
900
-
-
(PARTITION/PANELING /STORAGE WORKS) Supply & Installation Softboard paneling made of fabric of high quality & foam, which is washable, scratch resistance and fire retardant properties on 6mm thk. ply/softboard backing. Aluminium trim to be installed all arounf the softbaord paneling as per design & detail and as directed by Engineer-in-charge. (ALTOP OR EQUIVALENT)
2
-
-
Supply and Installation of Magnetic Writing board as per design & detail and as directed by Engineer-in-charge. (ALTOP OR EQUIVALENT)
2
-
-
Providing & installation of MS clamp behind the Softboard/writing board as per the design & detail and as directed by Engineer incharge.
40
-
-
Providing & Fixing 100mm wide 12mm thk. Bison board paneling all around the window jamb & cill. Joints to be finished properly with Primar putty as per design and detail and as directed by Engineer-in-charge.
80
-
-
Providing & Fixing of shelfs for keeping food stuffs ( Dry ) with shutter covering
18
-
-
(FLOORING AND DADO WORKS) Supply & Installation 2.4 mm thick vinyl flooring including skirting, in required colour, profile and pattern of specified approved make of required size as per the site conditions, etc. all complete. The flooring to be fixed and jointed by using adhesive as per manufacturer's specifications and as per direction of Engineer-in-Charge. All visible joints on flooring will be sealed as per the manufacture's specifications to make the floor seamless. Fixing details at junctions/ joints/ corners shall be done as per manufacturer's specification. The floor shall be dried and levelled with self levelling material, before fixing vinyl flooring. Approved makes: Ebaco, Polyfloor, Tarkett or equivalent
50
-
-
Providing and laying flooring 10mm thk. with 600mm x 600mm Antiskid ceramic Tiles of approved make and sample in pattern as per detailed drawings on up to 25mm thick bed of cement mortar, 1:6, including surface preparation, applying neat cement float, giving necessary slopes, cleaning joints and grouting them in neat white cement paste with pigmented additives to match shade of the tile. etc complete. (Basic Cost of vitrified ceramic tile Rs48/-Sft.) Approved makes of Tile: Kajaria, H & R, Johnson, Nitco, Somany
50
-
-
Providing and fixing 300X600 Ceramic Tiles Dado of approved make and sample in pattern as per detailed drawings on up to 25mm thick bed of cement mortar in a ratio of 1:6, including surface preparation, including cleaning joints and grouting them in neat white cement paste with pigmented additives to match shade of the tile. etc complete as per the direction of EIC. Cost of vitrified ceramic tile Rs.46/SQ.FT. (APPROX QTY IF REQUIRED AS PER SITE CONDITION)
100
-
-
Providing , cutting, fabricating, installing and fixing in position in true line and level SS 304 grade approved stainless steel railing consisting of S.S. members such as inclined, horizontal and vertical pipes / tubes, base plates, bolts, nuts, washers, gaskets, sealants, anchorages etc, including doing approved SS welding at workshop, neatly finished wherever called for, drilling the holes, interlocking the horizontal and vertical pipe members etc complete as per details, etc complete, as directed and as approved and as as directed by Engineer incharge.
14
-
-
(WOOD WORKS )Providing and fixing of door on 65mm x 100mm C.P. Teak Wood frame finished with Melamine paint / polish to match the door shutter laminate. Door of factory made 35mm thick solid core flush shutters conforming to IS 2202 Part I, Externally & internally lipped, with 1mm thk laminate finish on both side etc. as manufactured by M/s. Kutty, M/s. Shivam, M/s. Shreeji or equivalent approved, further shutters to be beaded on edges by 40mm x 6 mm thick teak wood beading using exterior quality synthetic adhesive and headless nails (Beading Kiln seasoned, antitermite treated), includning ironmongery (of approved make) as listed for each as per detail drawing and as directed by Engineer incharge. Size - 3'-0"x 7'-0" ht
4
-
-
Providing and constructing full height storage of width 450mm and size as per drawings, with top, sides, bottom, back, intermediates and shutters all as per detail drawing. All external surfaces and top to be finished in approved laminate, with balancing laminate on the interior surface. All exposed edges to be finished with approved edge binding. Rate to include all necessary hardware as per detail drawing. (Size - 3'X7')
10
-
-
(PAINTING AND FINISHES WORKS) Providing and applying two coats of Acrylic emulsion paint of Asian/ICI/Berger make to all internal walls and ceilings, of approved colour over a coat of primer including preparation of surface by thorough cleaning and wetting and applying ready made putty of "Altek" or "Wall Care" or equivalent as per manufacturer specification fully to give a smooth and even surface before painting and curing as per manufacturers specifications and as directed.
560
-
-
Providing and fixing Vinyl Posters of approved shade with recommended adhesive of approved make and sample as per manufacturer's specifications. Vinyl poster to be fixed on sunboard as per the detail drawing. All the edges of the poster to be finished properly.
70
-
-
Providing and applying two coats of External paint of Apex Ultima/ICI Weathershield/Berger make to all External walls and ceilings, of approved colour over a coat of primer as per manufacturer specification fully to give a smooth and even surface before painting and curing as per manufacturers specifications. 2 coats of paint to be applied on the primer. Cracks to be filled properly with as per manufacturer specifications before applying the paint and as directed by Engineer incharge.
480
-
-
(MISCELLANIOUS ) Providing and Supplying SS Trash Bins of approved shapes & size as directed by Engineer-in-charge.
4
-
-
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat of redoxide with approved enamel paint all complete as directed by Engineer in chagre.
320
-
-
Providing and Fixing 304 grade SS profile at flooring. (APPROX QTY IF REQUIRED AS PER SITE CONDITION)
8
-
-
Supply and installation of Signages at required location as per the design & detail and as directed by Engineer incharge.
2
-
-
Beautification of external Landscape area along with medicated plants as per design & detail and as directed by Engineer incharge ( Basic )
2
-
-
Barrications for the open area with Designer Fencing and Gate
4
-
-
Providing of Play kit for kids
4
-
-
Providing of First Aid box
4
-
-
Providing & Supplying of Study kit storage
4
-
-
(ELECTRICAL)Supplying & Installation of Conduiting & Cabling work and Realignment of Existing services including data connection for Wifi, CCTV etc as directed by Engineer inchagre.
4
-
-
Supply and Installation of Concealed / Suspended / Decorative light fixtures as per the design & detail and as directed by Engineer Inchagre. Philips make or Equivalent
40
-
-
Supply & Installation of color LED strip
4
-
-
Supply and Installation of Fan as per the design & detail and as directed by Engineer Inchagre. Crompton make or Equivalent
4
-
-
P/S of Fire Extinguishers
4
-
-
(Supply of Following sanitary ware for the Toilet & Kitchen area.) Providing & Supplying Squatting pan ( Indian Wc ) of approved make Hindware or equivalent
8
-
-
Providing & Supplying Flush Valve of approved make Jaquar or Equivalent
8
-
-
Providing & Supplying 1 way bib cock of approved make Jaquar or Equivalent
8
-
-
Providing & Supplying Basin of approved make Hindware or equivalent
8
-
-
Providing & Supplying Pillar cock of approved make Jaquar or Equivalent
8
-
-
Providing & Supplying Bottle trap of approved make Jaquar or Equivalent
16
-
-
Providing & Supplying Waste coupling of approved make Jaquar or Equivalent
16
-
-
Providing & Supplying Angular Stop Cock of approved make Jaquar or Equivalent
8
-
-
Supply & Installation of Concealed Plumbing work for the Toilet & Kitchen area as per the design & detail & as directed by Engineer incharge.
4
-
-
Providing & fixing SS fittings of approved make for Nahani trap with round / square frame including providing and fixing Stainless Steel Cockroach trap and fixing on tiles/marble, including water proofing of the Nahani trap etc. complete as per direction of engineer-in-charge.
4
-
-
Providing and fixing Stainless Steel Sink, with Chok-stop strainer, of 1st Quality of approved make, including and fixing with Stainless Steel Choke-stop strainer, C.P. waste coupling and C.P. bottle-trap with extension pipe of approved make, wall mounted shivel neck swinging low flow spout with hot / cold mixer from Angle Stop cock to Sink including providing and fixing 32 mm dia pipe from Bottle trap up to C.I. pipe / Nahani trap including provision of all necessary fittings etc. complete as per direction of engineer-in- charge.
4
-
-
Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of required capacity each with all necessary fittings and connection etc. complete on terrace.
4000
-
-
Providing & Fixing of RO Water Filter 10ltrs capacity wall mounted including provision of all necessary fittings etc. complete as per direction of engineer-in- charge.
4
-
-
Supply and installation of Modular desk with chairs ( Moon 7 pax ). Chanakya Make or Equivalent
4
-
-
Supply and installation of Modular desk with chairs ( Square 4 pax ). Chanakya Make or Equivalent
4
-
-
Supply and installation of Teacher Chair. Chanakya Make or Equivalent
2
-
-
Providing, supllying and fixing 500 KG ORGANIC WASTE COMPOSTER as per IS Overall Bio Degtadable oraginc waste generated in the gated community - Kg/day = 40% Non biodegradable waste = kg/day 60% Sewage sludge generation = KG/DAY , 40% OF BIODIGRADABLE WASTE copmlete as directed by EIC.
2
-
-
(RAIN WATER HARVESTING & RECHARGE PIT) Boring/drilling bore well of required dia perfectly vertical to receive casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipments, tools, plants and machineries required for the job, all complete as per direction of Engineer –in-charge, upto 90 metre depth below ground level.All types of soil 150 mm dia.
150
-
-
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed /plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire and labour charges, fittings and accessories, all complete, for all depths, as per direction of Engineer –in-charge. 150 mm nominal size dia.
150
-
-
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading and sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
2.7
-
-
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level and draw down etc. by step draw down method, collecting water samples and getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire and labour charges of air compressor, tools and accessories etc., all as per requirement and direction of Engineer-in-charge.
60
-
-
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 150 mm dia
10
-
-
Providing and fixing M.S. clamp of required dia made of 100 x10 mm flat to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts and nuts of required size complete. 150 mm clamp.
60
-
-
Supplying, filling, spreading and leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads and lifts, all complete as per direction of Engineer-in-charge.
19.3
-
-
Supplying, filling, spreading and leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads and lifts, all complete as per direction of Engineer-in-charge.
17.1
-
-
Supplying, filling, spreading and leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads and lifts, all complete as per direction of Engineer-in-charge.
21
-
-
Excavation, constructing with Bricks , plastering etc complete the 3mtx3mt size recharge pit as directed by EIC
10
-
-
Providing and fixing Stainless steel bar screen and chamber for pre filteration
10
-
-
POLELIGHT:- Providing and Supplying &fixing SITC of 9.0 Mtr approved make Octagonal poles made from CR sheet steel. The pole should be made as per IS. and shall be coated with hot dip galvanizing as per IS 2629/4759 with required base plate suitable suspend local wind speed to be erected on existing foundation. 10 Mtr. Long 70 mm Top X 175 mm bottom dia, 4 mm thickness. Foundation 1800 X 550 (Min) or AS per the OEM requirement Note: ONE SIDE ERECTION.
-
-
-
Providing M-20 Cement concrete foundation & 70 % PCC from bottom including formwork for the pole of size 60 x 60 x 150 cms. Deep in below ground level with plinth of 45 cms x 45 cms(or 45 cms dia x 45 cms) high upper ground level with necessary curing and finishing in approved manner. (For 10 mtr pole)
-
-
-
Supply and Installtion of Set of 4 Nos. M 24 x 750 long 'J' type EN 8 grade foundation bolts along with template for the above poles.
70
-
-
Providing & Fixing of Single Arm pole bracket consisting of medium class MS pipe of 4.2 cms. Out side dia complete with suitable sleeve tubing 45 cms. long M S. pipe (Medium Class). Suitable for pole top of OCTAGONAL POLE having sufficient fastners for fixing the brackets and having spread of 1.5.mtr. length, suitable welded stays,reducer and with check nuts complete painted with one coat of Red oxide/pu base primer and two coats of Aluminium /pu paint. Degree of Bracket shall be as per suggested by the OEM of the LED Lumineries.
-
-
-
Providing & Fixing of Double Arm pole bracket consisting of medium class MS pipe of 4.2 cms. Out side dia complete with suitable sleeve tubing 45 cms. long M S. pipe (Medium Class). Suitable for pole top of OCTAGONAL POLE having sufficient fastners for fixing the brackets and having spread of 1.5.mtr. length, suitable welded stays,reducer and with check nuts complete painted with one coat of Red oxide/pu base primer and two coats of Aluminium /pu paint. Degree of Bracket shall be as per suggested by the OEM of the LED Lumineries.
-
-
-
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD 10 %,
CCT 4000 K to 6500K, Uniformity ratio 0.7,
Luminaire efficiency 85 lumens/watt ,
LED driver efficiency 85 %
make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates)(A) Street Light (IP-65), Surge -4KV(for capacity of 90 watt). Make- Philips,Havells,Wipro and as directed by Engineer-In-Charge.
-
-
-
Supplying & erecting Sintex or approved make SMC Press moulded composite FRP ( Plastic ) loop –in, loop-out box with bakelite connector strip 4 way & hinged door having locking arrangement with mounting clamp with nuts, bolts & washer suitable for erection on Pole with cable clamps 7 earth bolt of following size of box.(a)300mm x 200mm x 100mm
-
-
-
Providing and erecting 2.5 sq. mm * 3 core Copper flexible cable from street light fixture to junction box.Make- Polycab,R.R.Cable,Havells and as directed by Engineer-In-Charge.
-
-
-
Supplying &erecting funnel type earthing having earth plate of following size burrid in specifically prepared earth pit 2.5 mtr. Below ground with 40 kg. charcoal and salt , 20 mm. dia .G.I. pipe with Funnel with a wire mesh for watering & bricks masonry block ,C.I. Cover completed as per para 7.3 of IS 3043 with necessary G.I. strip in G.I. pipe 2 mtr. Long completed connected to the nearest switch gear with end socket as per direction & duly tested by earth tester confirming to ISS (C) with 45 x45 x 0.35 cms. C.I. earth plate
8
-
-
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (A-1) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core). Make- Polycab,R.R.Cable,Havells and as directed by Engineer-In-Charge.
-
-
-
Providing & erecting required copper strip for earthing of H.T./OCB/ACB/Transformer,LT Panel board,Motors etc using copper clamp.
-
-
-
Providing and Supplying &fixing Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (E) 35/50 Sq.mm.
-
-
-
Providing & fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armored cable complete with out going tails, insulating tape etc for foll size cable.(A) 4 core 50 sq.mm
-
-
-
Making trench in Hard murum / Tar Road of suitable width of 90 cms. Or required depth for laying and size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground.
-
-
-
Providing and installing ''B" blass Galvanised iron pipe having smooth finished bore of the pipe on both ends erected nuts and bolts along the pole/wall shaping the pipe as per site rquirement of dia 32 mm dia.
-
-
-
Providing & erecting XLPE (IS : 7098)(I)-88 ISI armoured cable multistrand Aluminiumconductor for 1.1 KV. to be laid on wall with necessary clamps or in exiting trench / pipe at road crossing (B)3 1/2 core 50 Sq.mm Make- Polycab,R.R.Cable,Havells and as directed by Engineer-In-Charge.
-
-
-
Covering of cable with second class bricks or cement tiles laid cover the cable crosswise & also on both sides with covering of 7.5 cms. Layer of sand above & below cable. (16 bricks per Meter).
-
-
-
Control Panel:Supply, erecting, testing & commissioning of 14 SWG GI Panel Fabricated Powder coated specification. Dimension: 800 x 500 x 200 mm.In comer : 63 A MCCB – 1 No.20A SP MCB – 12 Nos.Digital Dual Range Timer – 1 Nos.Control Fuse – 3 Nos.40A TPN Power Terminal – 3 Nos.Digital Metering Unit space (as per ED Rules), Daman – 1 Nos.M.S. Coloured Stand made out of 75mm HDG channel having Height of 900mm & rectangle of 500 x 200mm etc complete as directed by Engineer In-charge,Make- L&T,Havells,Siemens and as directed by Engineer-In-Charge.
-
-
-
Electrical service connection charges inclusive submission of Drawings & Test Reports etc. Complete.
2
-
-
Approved make Three pole moulded case circuit breaker having breaking capacity / strength ICU of 35K.A. At 415V. having normal current rating up to 125A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50c/s. with all internal connections & complete erected in existing 16G.M.S. Housing. ICS = 100% of ICU only Cat. III.Make- L&T,Havells,Siemens and as directed by Engineer-In-Charge.
4
-
-
PUMP :-The scope of Contractor work shall include basic design, construction detailed design, supply installation, testing and commissioning and handling over the entire system along with Shop drawings, As-built drawings and O&M manual. Note:- All Hydropneumatic Pumps. 1) All Hydropneumatic Pumps should be with set of Butterfly Valve, Non return Valves , VFD , Differential Pressure sensor in main line , Pressure Vessel & Control Panel for Auto control operation. 2) All discharge ends of water supply Line will have Butterfly Valve, Solenoid Valve & Balancing Valve, along with tank mounted Float Level Sensor for High, medium and Low levels . 3)should have indication/ alarm panel to show High, medium& low level with indication/alarm & also indication /alarm signal through Flow switch from over flow pipe.a) For Domestic/Flushing water Hydroneumatic pumps Supply, installation, testing and commissioning of variable speed constant pressure Hydropneumatic water supply of average discharge pressure comprising of horizontal or vertical mounted multistage single outlet centrifugal stainless steel pumps 3 nos variable speed pumps. Pumps shall be coupled with 2900 RPM, 415 V, 50 Hz, Ac 3 phase, TEFC vertical flanged motor with compatible variable frequency drive, necessary suction and discharge manifolds of stainless steel, pump suction and discharge non-return valves as required, control panel, other switch gears and cables as necessary, base frame and vibration isolators, 1 No. pre-charged FRP pressure vessel of suitable capacity with butyl rubber bladder and other accessories as required. (Motors Should be Energy Efficient Rating not less than IE3 ). Prefered Makes :- ( Pumps - GRUNDFOSS/ WILLOW / XYLUM )( Motor makes - GRUNDFOSS/ SIEMENS / ABB )each pump 500 lpm @ 65m Head average discharge pressure (4W+1S) For Flushing water transfer WATER TRANSFER SYSTEM (MULTI TANK FILLING SYSTEM) FOR FLUSHING WATER TO INDUSTRY. To be approved and as directed by Engineer-In-Charge.
2
-
-
Supply, Installation of Electrical Panel so as to received one Main Feeder suitable for handling Electrical Load for Domestic Water Supply System . This panel shall distribute necessary Electrical energy to the respective Electric Control Panel for automatic stars / stops with 5 Nos. NO NC CONTACTS AND 1 NO RELAY CONTACT FOR EACH PUMP of Domestic Water System.
2
-
-
PUMP :-The scope of Contractor work shall include basic design, construction detailed design, supply installation, testing and commissioning and handling over the entire system along with Shop drawings, As-built drawings and O&M manual.Sump Pump :-Design, Providing & fixing & commissioning of Submersible Sump pump having built in overload protector.Pump outer casing to be of cast iron, Motor houshing, suction plate, bottom screen & all screws to be of stainless steel.Motor cover & pump housing to be of corrosion proof cast iron. Pump will have cast iron impeller & double mechanical seals in oil chambers.include one no.sheet steel clade wall mounting control panel for control of 2 nos. phase water pumps having suitable rated incoming isolating switch, branch MCBs, incoming voltmeter with selector switch & fuses DOL starter with hand reset overlaod relay, OFF/AUTO/MANUAL selector switch, ammeters,approved make level control switch for automatic control of pumps, with 1 nos.Low level and 1 nos.float senser in sump tank, and control wiring to stop the pump in case of full tank sensing from both the float senssors & electonic toggle relay for automatic alternating of pupms. (Motors Should be Energy Efficient Rating not less than IE3 ). Prefered Makes :- ( Pumps - GRUNDFOSS/ WILLOW / XYLUM ) ( Motor makes - GRUNDFOSS/ SIEMENS / ABB ) Pump for Pump room Sump, each pump 250 lpm @ 21 m Head average discharge pressure (1W+1S) Note:- All Sump Pumps. 1) All Sump Pumps should be with set of Butterfly Valve, Non return Valves & Control Panel for Auto control operation. 2) Should have indication/ alarm panel to show High, medium& low level with indication/alarm.
4
-
-
Design,Supply, Installation of Electrical Panel so as to received one Main Feeder suitable for handling Electrical Load for Submersible Sump System. This panel shall distribute necessary Electrical energy to the respective Electric Control Panel for automatic stars / stops with 5 Nos. NO NC CONTACTS AND 1 NO RELAY CONTACT FOR EACH SUMP PUMP .To be approved and as directed by Engineer-In-Charge.
2
-
-
PUMP :-The scope of Contractor work shall include basic design, construction detailed design, supply installation, testing and commissioning and handling over the entire system along with Shop drawings, As-built drawings and O&M manual.LANDSCAPE PUMP (AUTOMATIC IRRIGATION SYSTEM) Supply, installation, testing and commissioning of variable speed constant pressure Hydropneumatic water supply of average dischargepressure comprising of horizontal or vertical mounted multistage single outlet centrifugal stainless steel pumps 3 nos variable speed pumps. Pumps shall be coupled with 2900 RPM, 415 V, 50 Hz, Ac 3 phase, TEFC vertical flanged motor with compatible variable frequency drive, necessary suction and discharge manifolds of stainless steel, pump suction and discharge non-return valves as required, control panel, other switch gears and cables as necessary, base frame and vibration isolators, 1 No. pre-charged FRP pressure vessel of suitable capacity with butyl rubber bladder and other accessories as required. (Motors Should be Energy Efficient Rating not less than IE3 ). Prefered Makes :- ( Pumps - GRUNDFOSS/ WILLOW / XYLUM )( Motor makes - GRUNDFOSS/ SIEMENS / ABB )Note:- All Hydropneumatic Pumps. 1) All Hydropneumatic Pumps should be with set of Butterfly Valve, Non return Valves , VFD , Differential Pressure sensor in main line , Pressure Vessel & Control Panel for Auto control operation. 2) All discharge ends of water supply Line will have Butterfly Valve, Solenoid Valve & Balancing Valve, along with tank mounted Float Level Sensor for High, medium and Low levels . 3)should have indication/ alarm panel to show High, medium& low level with indication/alarm & also indication /alarm signal through Flow switch from over flow pipe.each pump 100 lpm @ 90 m Head average discharge pressure (1W+1S) For Land scape irrigation. To be approved and as directed by Engineer-In-Charge.
2
-
-
Design,Supply, Installation of Electrical Panel so as to received one Main Feeder suitable for handling Electrical Load for Submersible Sump System. This panel shall distribute necessary Electrical energy to the respective Electric Control Panel for automatic stars / stops with 5 Nos. NO NC CONTACTS AND 1 NO RELAY CONTACT FOR EACH SUMP PUMP .To be approved and as directed by Engineer-In-Charge.
4
-
-
PUMP :-The scope of Contractor work shall include basic design, construction detailed design, supply installation, testing and commissioning and handling over the entire system along with Shop drawings, As-built drawings and O&M manual.Design, Providing & fixing & commissioning of Submersible Sump pump having built in overload protector.Pump outer casing to be of cast iron, Motor houshing, suction plate, bottom screen & all screws to be of stainless steel.Motor cover & pump housing to be of corrosion proof cast iron. Pump will have cast iron impeller & double mechanical seals in oil chambers.include one no.sheet steel clade wall mounting control panel for control of 2 nos. phase water pumps having suitable rated incoming isolating switch, branch MCBs, incoming voltmeter with selector switch & fuses DOL starter with hand reset overlaod relay, OFF/AUTO/MANUAL selector switch, ammeters,approved make level control switch for automatic control of pumps, with 1 nos.Low level and 1 nos.float senser in sump tank, and control wiring to stop the pump in case of full tank sensing from both the float senssors & electonic toggle relay for automatic alternating of pupms. (Motors Should be Energy Efficient Rating not less than IE3 ). Prefered Makes :- ( Pumps - GRUNDFOSS/ WILLOW / XYLUM ) ( Motor makes - GRUNDFOSS/ SIEMENS / ABB ) Pump for Pump room Sump,each pump 210 lpm @ 95 m Head average discharge pressure (1W+1S) For Land scape irrigationSupply, Installation of Electrical Panel so as to received one Main Feeder suitable for handling Electrical Load for Submersible Sump System. This panel shall distribute necessary Electrical energy to the respective Electric Control Panel for automatic stars / stops with 5 Nos. NO NC CONTACTS AND 1 NO RELAY CONTACT FOR EACH SUMP PUMP .
2
-
-
METER FOR FLUSHING WATER Providing and fixing in position municipal tested water meter ' Capstain ' make as per requirement with strainer, non return valve and a gate valve 25 mm dia on the Municipal inlet line including fixing in brick masonry chamber 1.5MTX1.5MT with 230 thick walls in C.M. 1:5, resting on 150 thick C.C. M 15 bed, 12 thick cement plaster inside and outside in C.M. 1:3, C.I. frame and cover with locking arrangement etc. complete as specified.
96
-
-
Providing and fixing Ball valve with body of bronze and ball & stem of Stainless Steel of approved make with material and labour etc all complete as per drawings, specifications and directions of the engineer-in-charge25 mm dia
221
-
-
Providing and fixing Butterfly Valves with Stainless Steel Body, Black Nitrile Body Liner and Nylon Coated SG Iron Disc including hydraulic testing etc. complete as directed by the engineer-in-charge.50 mm dia
6
-
-
65 mm dia
2
-
-
100 mm dia
17
-
-
Providing & fixing Y-Stainer at terrace level 50 mm dia
5
-
-
Providing & fixing Y-Stainer at terrace level 65 mm dia
1
-
-
Providing & fixing Y-Stainer at terrace level 100 mm dia
14
-
-
Providing and fixing CI wafer type non return valves. 50 mm dia
7
-
-
100 mm nominal bore
19
-
-
Providing and fixing Solenoid valve along with 3 nos. Ball valve with body of bronze and ball & stem of Stainless Steel of approved make with material and labour etc all complete as per drawings, specifications and directions of the engineer-in-charge25 mm dia
9
-
-
Providing and fixing Solenoid valve along with 3 nos. Ball valve with body of bronze and ball & stem of Stainless Steel of approved make with material and labour etc all complete as per drawings, specifications and directions of the engineer-in-charge32 mm dia
46
-
-
Providing and fixing Solenoid valve along with 3 nos. Ball valve with body of bronze and ball & stem of Stainless Steel of approved make with material and labour etc all complete as per drawings, specifications and directions of the engineer-in-charge40 mm dia
32
-
-
Providing and fixing High ,medium and low level float sensers of approved make with material and labour etc all complete as per drawings, specifications and directions of the engineer-in-charge.
96
-
-
Providing, fixing including testing and commissioning GLYCERIN TYPE GAUGE of range 0 - 15 Kg / sqcm conforming to IS - 3624 having bourdon tube of stainless steel 310 in cast aluminium,stove enamelled, black, weather proof case with outer, screwed aluminium bezel and complete with necessary U-type stainless steel siphon tube and cock including providing suitably painted angle iron support to the tube etc.as per specification complete as required.
28
-
-
Panel with signals for High, medium & Low level of water in tank for domestic & flushing overhead Tank,also with alarm at low level and overflow of water from the tank with indication .
96
-
-
CABLES Supply, laying, Installation, Testing & Commissioning Following sizes of XLPE-FRLS,PVC/SWA/PVC/ST2 sheathed insulated armoured 1100V grade copper conductor armoured cables fixed to walls, existing trays by means of saddles,with end terminations etc. as per IS 7908 (Part 1) 1988 4 Core 10 sqmm cu armoured cable. Make- Polycab,R.R.Cable,Havells and as directed by Engineer-In-Charge.
-
-
-
Supply, laying, Installation, Testing & Commissioning Following sizes of XLPE-FRLS,PVC/SWA/PVC/ST2 sheathed insulated armoured 1100V grade copper conductor armoured cables fixed to walls, existing trays by means of saddles,with end terminations etc. as per IS 7908 (Part 1) 1988 Make- Polycab,R.R.Cable,Havells and as directed by Engineer-In-Charge. 3 Core 10 sqmm cu armoured cable
940
-
-
Supply, laying, Installation, Testing & Commissioning Following sizes of XLPE-FRLS,PVC/SWA/PVC/ST2 sheathed insulated armoured 1100V grade copper conductor armoured cables fixed to walls, existing trays by means of saddles,with end terminations etc. as per IS 7908 (Part 1) 1988 Make- Polycab,R.R.Cable,Havells and as directed by Engineer-In-Charge. 4 Core 6 sqmm cu armoured cable
80
-
-
Supply, laying, Installation, Testing & Commissioning Following sizes of XLPE-FRLS,PVC/SWA/PVC/ST2 sheathed insulated armoured 1100V grade copper conductor armoured cables fixed to walls, existing trays by means of saddles,with end terminations etc. as per IS 7908 (Part 1) 1988 Make- Polycab,R.R.Cable,Havells and as directed by Engineer-In-Charge. 3 Core 6 sqmm cu armoured cable
80
-
-
Supply, laying, Installation, Testing & Commissioning Following sizes of XLPE-FRLS,PVC/SWA/PVC/ST2 sheathed insulated armoured 1100V grade copper conductor armoured cables fixed to walls, existing trays by means of saddles,with end terminations etc. as per IS 7908 (Part 1) 1988 Make- Polycab,R.R.Cable,Havells and as directed by Engineer-In-Charge. 4 Core 4 sqmm cu armoured cable
120
-
-
Supply, laying, Installation, Testing & Commissioning Following sizes of XLPE-FRLS,PVC/SWA/PVC/ST2 sheathed insulated armoured 1100V grade copper conductor armoured cables fixed to walls, existing trays by means of saddles,with end terminations etc. as per IS 7908 (Part 1) 1988 Make- Polycab,R.R.Cable,Havells and as directed by Engineer-In-Charge. 3 Core 4 sqmm cu armoured cable
120
-
-
Supply, laying, Installation, Testing & Commissioning Following sizes of XLPE-FRLS,PVC/SWA/PVC/ST2 sheathed insulated armoured 1100V grade copper conductor armoured cables fixed to walls, existing trays by means of saddles,with end terminations etc. as per IS 7908 (Part 1) 1988 Make- Polycab,R.R.Cable,Havells and as directed by Engineer-In-Charge. 2 Core 2.5 sqmm cu armoured cable
850
-
-
Supply, laying, Installation, Testing & Commissioning Following sizes of XLPE-FRLS,PVC/SWA/PVC/ST2 sheathed insulated armoured 1100V grade copper conductor armoured cables fixed to walls, existing trays by means of saddles,with end terminations etc. as per IS 7908 (Part 1) 1988 Make- Polycab,R.R.Cable,Havells and as directed by Engineer-In-Charge. 2 Core 1.5 sqmm cu armoured cable
850
-
-
Supply, laying, Installation, Testing & Commissioning Earth Conductors 8 SWG GI wire
800
-
-
Supply, laying, Installation, Testing & Commissioning 25x3 GI strip
850
-
-
EPBX:- Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed (a) 20 mm
150
-
-
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed (b) 25 mm
3100
-
-
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed (c) 32 mm
150
-
-
Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-locking arrangement with grooves, trunking of size not below 12.5 mm in height as per IS with accessories of PVC/Resin polypropylene not below 1.8 mm thick duly sealed in joint & erected on wall / ceiling of following size .
60
-
-
Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (a) with medium class Rigid PVC pipe and accessories(d) 3 wire 2.5 sq. mm
600
-
-
Supplying & erecting Delton or approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos.of pairs. With necessary connections.[A] Conductor Size 0.5 mm (a) Unarmoured 3) Three Pairs
1000
-
-
Supply and Installation of camera HIK Vision. Full HD720P video output
• Adopt HD TVI technology
• True day / night • DNR, Smart IR.
• Up to 20m IR distance.
• IP66 weatherproof.DS-2CE56C2T-IR. Make-Sony,Samsung,LG and as directed by Engineer-In-charge.
2
-
-
Supply and Installation of camera HIK Vision.
• Full HD720P video output.
• Adopt HD TVI technology.
• True day / night. • DNR, Smart IR.
• Up to 20m IR distance.
• IP66 weatherproof.DS-2CE16C2T-IR. Make-Sony,Samsung,LG and as directed by Engineer-In-charge.
75
-
-
Supply and Installation of 16 Ch. Stand Alone Digital Video Recorder. • H.264 & Dual-stream video compression.
• Support both HD-TVI and analog cameras with adaptive access.
• Full channel@720P resolution real-time recording.
• HDMI and VGA output at up to 1920×1080P resolution.
• Long transmission distance over coax cable.
• Support up to 16-ch synchronous playback at 720P resolution. Model No.-7216 HGHI-SH. Make-Sony,Samsung,LG and as directed by Engineer-In-charge.
5
-
-
Supply and Installation of Hard Disk 1000 GB Hard Disk for DVR (Seagate)
5
-
-
Supply and Installation of Power Supply. [SMPS]
12 VOLT DC Regulated Power Supply for Cameras.
Prevents Liquid Trickling into Circuit.
Against Short Circuit /Over Load / Over Voltage /Over Temperature.
Increase Voltage to get CLEAR PICTURE if loss in voltage due to wire length.
Switches off SMPS in case of shorting in camera wire. AUTO ON when fault OK.
ON/OFF Switch.
Wall Hanging / Desktop.
With 8 IR Camera & Without IR 16 Camera Wit Loaded.
5
-
-
Supply and Installation of U.P.S. For Battery Back-Up. 600 V.A.
Back Up Time: Approx.10 Min.
5
-
-
Supply and Installation of Plastic Mounting Stand. [For Dome IR Cameras.]
78
-
-
Supply & Installation of Co-Axil Cable.[3+1].
3300
-
-
Supply and Installation of Video Connector.B.N.C. Video Connector. Each Camera.02 Nos.D.C. Power Connector. Each Camera. 01 No.
230
-
-
Supply and Installation of LG/SONY/SAMSUNG LED 55 CM Colour Monitor.22”.Wall Mounting.IPS with stand and accessories.
5
-
-
Supplying & erecting Digital / PCM / TDM EPABX System having SMT design, system with flexible universal slots, Inbuilt Auto attendant facility, Minimum 15 Nos. conference, Analog extension line, Calling GSM, E&M line, PRI / E1 & VOIP program me through Analog telephone digital key from Ethernet, public address cord, shall have unrestricted simultaneous dialling facility, QSIG protocol on PRI, 95 / STD / ISD / Local- Locking ,Class of Service, Quick Dial- Single Digit dialling of any two external numbers, Once only ring device, Boss/Secretary- Do not Disturb Facility, Power Down Mode, Hot Line, Hot Outward Dialling, Day Night Mode, Auto Call Back, Barge-in, Call Pick Up & Call Transfer, Call transfer while Ringing. With Voice Guide System, (DISA), Caller ID (CLI), CLI Base ECF,CLI Base routing Internet Ready Port, External Music Port, Call Budgeting, Call Most Calculation(ASMDR), DID Direct Inverse Dialling, External Music Input, Fax Homing, Global Directory Printing. with following capacities[E] No. Extension - 128 , No. of Junction -24 , No. of expandable ports 512 - , Operator Console -01 Compatible - ISDN and Networking. Make-Sony,Samsung,LG and as directed by Engineer-In-charge.
2
-
-
Supplying & erecting push button type telephone instrument having speaker phone Caller ID & hands free dialling system & 30 memories with display system (a) Single line BPL / SONY/ BEETEL or equivalent make
4
-
-
Supplying & erecting approved make Horizontal / Vertical double, mounting type siren, with 8 KM range having 5HP, 440V, 2800 RPM, AC motor with adjustable foundation plate(Kheraj / Jyoti / GEC).
2
-
-
Supplying & erecting Delton or approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos.of pairs. With necessary connections.(b) Armoured [Jelly Filled] 2) Twenty Pairs.
2100
-
-
Supplying & erecting Delton or approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos.of pairs. With necessary connections.(b) Armoured [Jelly Filled] 4) One Hundred Pairs
250
-
-
Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection. As desired by Engineer In charge(3) Two Pin/RJ-11 Telephone Socket[B] For Two Gang
30
-
-
Supplying & erecting 100 pair telephone junction bos for EPABX sysyem
4
-
-
Supplying & erecting funnel type earthing having earth plate of following size burred in specifically prepared earth pit 3 mtr. below ground with 40 kg. charcoal and salt with alternate layers of charcoal & salt, 20mm.dia. G.I. pipe with Funnel with a wire mesh for watering & bricks masonry block, C.I. Cover complete as per para 7.3 of IS 3043 with necessary length of double Galvanised Iron / copper earth wire No 6 SWG bolted with lug to the plate and covered in 12 mm dia. G.I. pipe 2.5 mtr long complete connected to the nearest switch gear with end socket as per direction & duly tested by earth tester confirming to IS (As per drawing) with following specification (B) With 45 x 45 x 0.35 cms. C.I. earth plate
10
-
-
Providing and erecting Annealed bare Copper wire 8 to 16 SWG.
40
-
-
Providing & supplying 240 V MCB double pole switch for lighting Load (B curve) having 10 KA breaking capacity & confirms to IS:8828 in existing box having following capacity(B) 40 Amp. Make-L&T,Siemens,Havells
15
-
-
Providing and erecting sheet steel powder coted MCB Distribution board- flush / surface mounted fitted with basbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCB.( The DBs should be used of same company of MCB to be used ).(E)Single phase 8 way single door. Make-L&T,Siemens,Havells
6
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements