Municipal Council Tender
View complete overview of Daman & Diu Municipal Council Tender
Municipal Council Tender
Civil And Construction
Building Construction
Eprocure
Opening Date22 Mar 2022
Closing Date31 Mar 2022
Tender Amount₹ 7,64,22,740
Costs
EMD
₹ 15,28,500Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_DIUDT_2136_1Bid Award Id
ViewTender No
72/2021-22/DSCL-DiuTender Authority
Municipal Council ViewPurchaser Address
-Website
http://ddtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Felling trees of the girth beyond 120 cm girth up to and including 240 cm (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.
7
-
-
Felling trees of the girth beyond 240 cm (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.
1
-
-
Removing and scraping of old deteriorated plaster of any thickness from wall / RCC member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift as per direction of Engineer-in-charge.
1219
-
-
Dismantling dressed stone work ashlar face stone work, Brick masonry, marble work or precast concrete work in lime mortar manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material with all lead and lift as per direction of Engineer-in-charge
189
-
-
Demolition of RCC work including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift as per direction of Engineer-in-charge.
307
-
-
Demolition of lime concrete and disposal of unserviceable materials with all lead and lift as per direction of Engineer-in-charge.
50
-
-
Demolition of Cement concrete and disposal of unserviceable materials with all lead and lift as per direction of Engineer-in-charge.
7
-
-
Demolition of stone masonry done in cement mortar including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift as per direction of Engineer-in-charge.
361
-
-
Dismantling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachement etc. Not exceeding 3 Sq.m in area complete and stacking them within all lead and lift as per direction of Engineerin-charge.
103
-
-
Dismantling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachement etc., exceeding 3 Sq.m in area complete and stacking them within all lead and lift as per direction of Engineer-in-charge.
2
-
-
Dismantling wood work, wrought framed and fixed in framed trusses including stacking the materials with all lead and lift as per direction of Engineerin-charge.
34
-
-
Dismantling steel work including segregating and stacking the materials with all lead and lift as per direction of Engineer-in-charge.
500
-
-
Dismantling tile flooring & dado, etc. laid in all mortar including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift as directed by Engineer-in-charge
575
-
-
Dismantling C.I. pipes G.S.W.pipes and A.C. rain water pipes with fittings and clamps including stacking the materials with all lead and lift ( for any dia, of pipe)
50
-
-
Dismantling sanitary fittings like wash basin . W.C. pan Indian and European type, flushing tank etc. including stacking the materials with all lead and lift.
15
-
-
SUB HEAD 2- EARTHWORK
-
-
-
Excavation for foundation in Loose or Soft soil up to 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff with all lead and lifts.
1380
-
-
Excavation for foundation in dense or Hard soil from 1.5 m - 3.0m depth including sorting out and stacking of useful materials and disposing off the excavated stuff with all lead and lifts.
374
-
-
Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and consolidating etc. complete. (upto 10ton)
1501
-
-
SUB HEAD 3- PREPARATORY WORK
-
-
-
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.
567
-
-
Propping and supporting the structural elements and its adjoining areas with tubular steel props (adjustable or as required), bracings, steel runners etc. to relieve the structural member of the required load coming over it as per the pattern given by the contractor - Provding and fixing of tubular Steel prop of up to 4 MT capacity and up to 3.2 m heights as per directions of Engineer-iIn- Charge.
308
-
-
Propping and supporting the structural elements and its adjoining areas with tubular steel props (adjustable or as required), bracings, steel and wooden runners etc. to relieve the structural member of the required load coming over it as per the pattern given by the contractor - Providing and fixing of adjustable span ESO+SI (2.35-3.40) as per directions of Engineer In charge.
36
-
-
Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in situ reinforced concrete and plain concrete work as per directions of Engineer In charge. ( Foundations )
365
-
-
Providing formwork of ordinary timber planking with new plywood so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for in situ reinforced concrete and plain concrete work as per directions of Engineer In charge.( Slabs )
3031
-
-
Providing formwork of ordinary timber planking with new plywood so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for in situ reinforced concrete and plain concrete work as per directions of Engineer In charge.(Columns )
1787
-
-
Providing formwork of ordinary timber planking with new plywood so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for in situ reinforced concrete and plain concrete work as per directions of Engineer In charge. (Columns- Circular )
25.48
-
-
Providing formwork of ordinary timber planking with new plywood so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for in situ reinforced concrete and plain concrete work as per directions of Engineer In charge.(Beam )
1803
-
-
Providing formwork of ordinary timber planking with new plywood so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for in situ reinforced concrete and plain concrete work in Staircase with sloping or stepped soffits including risers and stringers excluding landing as per directions of Engineer In charge
6615
-
-
Providing formwork of ordinary timber planking with new plywood so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for in situ reinforced concrete and plain concrete work as per directions of Engineer In charge.( RCC wall/Shear Wall/Retaining wall/Sump/water tank/Septic tank)
673
-
-
Extra for additional height of propping and centering where the height of propping and centering exceeds 4 .0 M between supporting floor to ceiling including temporary brick or stone pillars for supporting as required. (i)Height more than 4.0 M.and upto 5.0 M. (upto 10 ton) and removal of the same for in situ reinforced concrete and plain concrete work as per directions of Engineer In charge.( Slabs )
276
-
-
SUB HEAD 4- ANTI TERMITE TREATMENT
-
-
-
Providing antitermite Treatment of soil under existing floors using chemical emulsion @ one liter per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
557
-
-
Providing Around periphery of building Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
240
-
-
Providing Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 liters per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm center to center and sealing the same as directed by the engineer in charge.
2160
-
-
SUB HEAD 5- STUCTURAL REPAIRS
-
-
-
Manually removal of vegetation (major trees, climbing plants, creepers) from walls, columns, arches, floor etc in a skilled and careful manner, using appropriate tools and means and without causing any damage to the adjoining parts, including carrying and stacking the dismantled materials including lift/lower upto 11mtrs and lead upto 50 mtrs as directed by the engineer or architect in charge. The exposed surfaces will be coated with a paste made from ammonium sulphamate crystals or with "Tree killer" available in market. In this condition the root system may be left to absorb and die.
(Note : Large sections of dead wood must Not be left within the core. As they decay they will remove support and create voids and weaknesses in the wall. Pull off a well‐established mat of vegetation must be resisted)
65
-
-
Steel‐rod stitching incracked stone patties, beam,and lintels.Providing and fixing of 10mm dia 316 grade stainless steel rods of 90 cms of which 15cm on either side and cold bending at 90 degrees. The stainless steel clamps to be fixed perpendicular to the crack by drilling in stone and fixing with quartz sand (1:3) and araldite mixture in such a way that the entire length of the rod is in complete contact of the stone and the bent ends are fully inserted in the cracked stone as per requirement of position as directed by Engineer-in- Charge. Note : Payment will be made on the completion of the whole process of work.
199
-
-
Steel‐rod stitching incracked stone patties, beam,and lintels.Providing and fixing of 12mm dia 316 grade stainless steel rods of 90 cms of which 15cm on either side and cold bending at 90 degrees. The stainless steel clamps to be fixed perpendicular to the crack by drilling in stone and fixing with quartz sand (1:3) and araldite mixture in such a way that the entire length of the rod is in complete contact of the stone and the bent ends are fully inserted in the cracked stone as per requirement of position as directed by Engineer-in- Charge. Note : Payment will be made on the completion of the whole process of work.
199
-
-
Providing and inserting 12 mm dia galvanized iron injection nipples along crack lines in masonry work, including. i) drilling holes of required diameter up to depths from 30mm to 80mm or half the thickness of member (whichever is less), at required spacing but Not exceeding the thickness of member or 300 mm.ii) Making grooves of size 12mm x 12mm along the crack line.iii) Making the crack dust free by blowing compressed air and then washing with water. iv) Sealing the distance between the injection nipples with approved putty (Polymer modified lime mortar /polyester putty/epoxy putty) etc. and allow it to cure. v) If limeitious grout material proposed to be used, washing and saturating the cracked surface with water by pumping from top most nipple and down wards complete as per the direction of Engineer-in-charge.( The rate shall include all material, labour and all operations above. The cost of grout material shall be paid separately on the basis of actual quantity consumed.
345
-
-
Providing and grouting pre-packed ready to use grout made up of natural hydraulic lime with the addition of natural pozzolona filler, specially designed for use in restoration of old brick/stone masonry. The grout material shall have low (less than 1.5%) water soluble salt content, Elastic modulus not less than 5 GPA and minimum compressive strength of 18 N/sqmm at 28 days. Mix the product by introducing 3/4 of the required water (which is 7-8 liters of 25 kg or as per manufactures specification) into the mixer. Add continuously the product and the remaining water until perfect mixer having a fluid consistency is achieved. Inject the same with gravity or mechanized equipment with pressure not more than 2 kg/sqcm as per site conditions by means of injection technique. The item shall include all cost of materials, machinery and labour etc. complete in all respect. (The payment shall be made on the basis of actual weight of grouted material injected into the cracks /voids as directed by Engineer-in- Charge:
3450
-
-
Repairing of 0.5mm to 5 mm wide open joints / cracks in all types of sand stone masonry work including scrapping of loose jointing material from cracks. The inner side to be filled/pointed with polymer mixed lime mortar(Limepor 100 or equivalent) with wooden trowel and fixing grouting nipple from outer side as directed by Architect. Then apply polymer based lime mortar by injection grouting through 5mm diameter Nozzle through the pre fix nipple up to total thickness of existing stone wall and removing the PVC nipple pipe, lime moratr of mix lime & sand 1:1 mix with polymer using katha or other additives to achieve require matching colour and including cost of all materials, labour, machinery, equipment, curing and cleaning the site as directed by Engineer-in-charge. Item shall be measured by dry mix of lime, sand and polymer in Kg.
2760
-
-
Providing and fixing high tensile 316 grade 8/12 mm dia stainless steel helical bars conforming to BS EN 845-1: 2013 or equivalent international code ,fixing in dry condition across the wall junctions or across the buttresses through stone/brick masonry matrix from external side at specified interval upto the depth of 1.35m. Minimum ultimate tensile strength shall be 1000 N/sqmm and minimum tensile load capacity of 30 KN. Drill 8/12 mm pilot hole to a depth at least 15 mm longer than length of the tie; use 10 mm bit for hard masonry. Insert driving shank of the tie into SDS tool and hammer home using a light to medium-weight SDS drill. Patch pilot hole with colour matched mortar all as per manufractures specification including The rate includes making pilot hole of required depth , driving the bars and finishing the head with matching mortar complete as per manufacturers specifications complete in all respect as per instructions of Engineer In-charge.
253.33
-
-
Chipping of unsound/weak concrete material from slabs, beams, columns etc. for 50 mm average thickness with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge.
8
-
-
Cleaning upto 12 mm dia reinforcement bars from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.
38
-
-
Providing, mixing and applying bonding coat of epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.
8
-
-
Providing, mixing and applying 50 mm average thickness in 3 layers SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be Not less than 30 N/Sqmm2).
8
-
-
SUB HEAD 6- CIVIL WORKS
-
-
-
Providing and laying of White Stone Bela masonry block in course in superstructure with stone of approved quality in cement Mortar 1:5 (1-Cement :5- course sand) including packing the joints etc. complete.
938
-
-
Providing and laying of white stone bela masonry work in partition walls upto 15 cm thickness in cement mortor 1:5 (1- cement : 5 course sand ), including packing the joints etc. complete (Interior wall-New building)
491
-
-
Providing and laying in position plain cement concrete of specified grade (M15) and curing complete excluding the cost of centering and shuttering - All work up to plinth level. (Leveling course)
279
-
-
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work for works upto plinth level, using cement content as per approved design mix, excluding the cost of centering, shuttering finishing and excluding reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum.Excess/less cement used is payable/recoverable separately).
149
-
-
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work for works above plinth level upto floor v level, using cement content as per approved design mix, excluding the cost of centering, shuttering finishing and excluding reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum.Excess/less cement used is payable/recoverable separately).
458
-
-
Providing and laying in position ready mixed M-35 grade concrete for reinforced cement concrete work for works above plinth level upto floor v level, using cement content as per approved design mix, excluding the cost of centering, shuttering finishing and excluding reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. (Note :- Cement content considered in this item is @ 370 kg/cum.Excess/less cement used is payable/recoverable separately).
625
-
-
Providing TMT Bar FE 500D reinforcement for R.C.C work including bending, binding and placing in position complete. ( Upto 10 ton)
191003
-
-
Providing anticorrosive treatment to Fe 500D bars with FUSION BONDED EPOXY COATING (FBEC) confirming to IS13620:1993 at approved plant including testing of coating as per relevant IS, before bringing the coated bars on site including To & Fro transportation of bars for sending at plant site etc. complete, for FE 500D bars : Up to 28 mm dia.
191.2
-
-
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
89
-
-
Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1 :3 (1-cement:3-sand).(Interior wall)
2124
-
-
Providing and applying limeplaster (Plain walls) up to 25mm thick, 12mm thick base coat in prepared with 1:2 lime + river sand and 10mm thk second coat in Prepared with 1:2 Lime +silica, 3mm final coat in lime putty 1:2 (Lime +fine Sand) by preparing the surface adequately with proper adhesion using liquid gud, methi, gugal complete as per engineer in charge (Internal and External)
921
-
-
Providing 12mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1 :3 (1-cement:3-sand). (Internal surface)
3233
-
-
Providing 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1 :3 (1-cement : 3- sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement 1-sand) etc. complete.(Exterior wall)
2215
-
-
Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm in foundation and plinth in cement mortar 1:6 (1-cement :6 - fine sand) (B) Conventional
2
-
-
Supplying, filling, spreading & leveling 40mm size Crushed stone aggregare for Hard Quality in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
7
-
-
Supplying, filling, spreading & leveling 20mm size Crushed stone aggregare for Hard Quality in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
7
-
-
Supplying, filling, spreading & leveling Coarse sand for filteration process in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
4
-
-
Providing and applying of Permeable, water based Mature Lime wash finish of interior and exterior grade used for conservation and restoration of historical building, formulated by Mature Lime Putty with fillers, After the cleaning of surface and removing any loose or flaking material, applied two coat of Lime wash finish with one coat of Lime Based primer of approved color and shade to achieve desired finish apply by brush, roller and appropriate tools, as per specification, all completes with the direction of Engineer-in-Charge and Architect. Internal and external surface.
1219
-
-
Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.
7864
-
-
Wall painting with emulsion paint of approved brand and colour as directed by the Engineer-in-Charge of Two or more coats (Internal)
6729
-
-
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.(External)
1135
-
-
Providind, laying and fixing of precast RCC Post Type I, II of M30 Grade, aggregate size Not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post Not to exceed 1 in 500, centre to centre spacing between vertical post No.t to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.
43
-
-
Providind, laying and fixing of precast RCC Post Type IV of M30 Grade, aggregate size Not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post Not to exceed 1 in 500, centre to centre spacing between vertical post No.t to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.
18
-
-
Providind, laying and fixing of precast RCC Post Type V of M30 Grade, aggregate size Not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post Not to exceed 1 in 500, centre to centre spacing between vertical post No.t to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.
2
-
-
Providind, laying and fixing of precast RCC Baluster Type-I & II of M25 Grade, aggregate size Not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post Not to exceed 1 in 500, centre to centre spacing between vertical post No.t to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.
471
-
-
Providind, laying and fixing of precast RCC Baluster Type-III of M25 Grade, aggregate size Not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post Not to exceed 1 in 500, centre to centre spacing between vertical post No.t to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.
81
-
-
Providind, laying and fixing of precast RCC Baluster Type-IV &V of M25 Grade, aggregate size Not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post Not to exceed 1 in 500, centre to centre spacing between vertical post No.t to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.
322
-
-
Providind, laying and fixing of precast RCC Top and bottom hand rail Type- I, II, IV &V of M25 Grade, aggregate size Not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post No.t to exceed 1 in 500, centre to centre spacing between vertical post No.t to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.
224
-
-
Providind, laying and fixing of precast RCC Top and bottom hand rail Type- III (Top) of M25 Grade, aggregate size Not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post No.t to exceed 1 in 500, centre to centre spacing between vertical post No.t to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.
29
-
-
Providind, laying and fixing of precast RCC Top and bottom hand rail Type- III (Bottom) of M25 Grade, aggregate size Not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post No.t to exceed 1 in 500, centre to centre spacing between vertical post No.t to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.
29
-
-
Providind, laying and fixing of precast RCC post Column Type-I of M30 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.
4
-
-
Providind, laying and fixing of precast RCC post Column Type- II of M30 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.
15
-
-
Providind, laying and fixing of precast RCC Baluster Type-I & III of M25 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.
547
-
-
Providind, laying and fixing of precast RCC Baluster Type- II of M25 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.
370
-
-
Providind, laying and fixing of precast RCC Top Rail Type-I & III of M25 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.
176
-
-
Providind, laying and fixing of precast RCC Post Type-IV of M30 Grade, aggregate size Not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post Not to exceed 1 in 500, centre to centre spacing between vertical post No.t to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.
20
-
-
Providind, laying and fixing of precast RCC Baluster Type-IV of M25 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.
273
-
-
Providind, laying and fixing of precast RCC Top Rail Type-IV of M25 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.
49.3
-
-
Providing and fixing anodized aluminium casement windows, top hung ventilators, combination of fixed glazing fully openable windows for Kitchen, Toilet etc using Z sections of 40 mm, weight 0.663kg/m: central mullion section 59x33mm, weight 1.123kg/m: other sections of approved make conforming to IS: 733 andIS: 1285, fixing with dash fasteners of required dia and sizeThe shutters on aluminium hinges with approved quality of fixtures such as aluminium tower bolts,handles,stays etc.with glazing clips and rubber beading fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections anodised 12 to 15 microns, including cutting to required length, joints mitred subdividing the frame tenonned and rivetted in the assembled frame stiffened with end clips at corners angles and fixed to wall, lintel beam, floor, cill, kota slab as the case may be with necessary screws, rawl plug, cutting masonary or concrete and making good the original surface; including cost and conveyance of all materials, labour, equipments and machineries all leads and lifts, loading and loading, transportation at all floor levels complete for successful completion of work all as per specification and as directed by the Engineer-in-charge.
479
-
-
Providing and fixing 5.0 mm thick cleared toughned glass for shutters fitted in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. including cost and conveyance of all materials, labour, equipments and machineries all leads and lifts, loading and loading, transportation at all floor levels complete for successful completion of work all as per specification and as directed by the Engineer-in-charge. .
8
-
-
Providing and fixing 6.0 mm thick cleared toughned glass for shutters fitted in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. including cost and conveyance of all materials, labour, equipments and machineries all leads and lifts, loading and loading, transportation at all floor levels complete for successful completion of work all as per specification and as directed by the Engineer-in-charge. .
1570
-
-
Providing and fixing 12.0 mm thick cleared toughned glass for shutters fitted in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. including cost and conveyance of all materials, labour, equipments and machineries all leads and lifts, loading and loading, transportation at all floor levels complete for successful completion of work all as per specification and as directed by the Engineer-in-charge. .
567
-
-
Providing and fixing new timber frames upto 75mm thick with well class A Indian well seasoned teak wood (Nagpur teak, CP teak, Valsadi teak or equivalent) well-seasoned, chemical treated Door/Window frames made to size, shape and design as per original design, size and pattern including and fixed in position with hold fast (40x5-40 cm) long lugs or with dash fasteners of required dia & length etc complete as per direction of Engineer In Charge.
2
-
-
Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall have . light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity0.043° w/m KC.for the best thermal Insulation . The Light weight calcium Silicate tile shall be of approved texture Fine fissured/ Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on true horizontal level suspended inter locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams per sqm including both side) consisting of main T runner suitably spaced at joints to get required length and size of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross T of size 24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along spaced between main 'T' at 600mm centre to centre to form agrid of 1200X600mm and secondary cross 'T' of length 600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle of the 1200X600mm panel to form grid of size 600X600mm resting on periphery walls/partitions on a perimeter wall angle pre- oated steel of size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick Densified edges light weight calcium silicate ceiling tiles of approved texture (Fine Fissured/Cosmos/Spintone) in the grid including, cutting /making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main 'T' runners to be suspended from ceiling using G. I. slotted cleats of size 25X35X1 .6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel level clips of size 85X30X0.8mm, spaced at 1200mm centre to centre long main 'T' bottom exposed with 24mm of all T-sections shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings and as directed by engineer-in-charge.Note:- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tiles shall have NRC. Value of 0.50 (Minimum) for Fine fissured/Spintone/Cosmos and 0.75 NRC for Globe, light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity. 0.043° w/m KC.for the best thermal Insulation
275
-
-
Supply, installing, testing and commissioning of Electric Traction Elevator having capacity of 408 kg, 6 Persons and rise of 13m with a speed of 1mps and 3 stops (all openings on one side). Which includes other features like Flat Coated Steel Belt, Stainless Steel false ceiling finish, Stainless Steel Mirror Finish Handrails on rear car panels, car door & landing door in stainless steel finish of grade SS-304, 60 mins fire rating, Telescopic 2 speed door, button arrangement in LCD Manochrome type, Anti-nuisance Car Call Protection, Independent Service (for Duplex only), Overload Device, Nudging, Emergency Firemen’s Service, Emergency Car Light Unit Infrared Curtain Door Protection, Door Time Protection, Emergency Alarm Button, Extra Door Time of Lobby & Parking, Door Open/Close Button, Manual Rescue Operation, Belt Inspection Drive, Auto Fan Cut Off, Automatic Rescue operation, Voice Synthesizer and Intercom complete., as directed by the engineer in charge.Make: Johnson lifits & Escalators
1
-
-
Supply, installing, testing and commissioning of Electric Traction Elevator having capacity of 544 kg, 8 Persons and rise of 8m with a speed of 1mps and 2 stops (all openings on one side). Which includes other features like Flat Coated Steel Belt, Stainless Steel false ceiling finish, Stainless Steel Mirror Finish Handrails on rear car panels, car door & landing door in stainless steel finish of grade SS-304, 60 mins fire rating, Telescopic 2 speed door, button arrangement in LCD Manochrome type, Anti-nuisance Car Call Protection, Independent Service (for Duplex only), Overload Device, Nudging, Emergency Firemen’s Service, Emergency Car Light Unit Infrared Curtain Door Protection, Door Time Protection, Emergency Alarm Button, Extra Door Time of Lobby & Parking, Door Open/Close Button, Manual Rescue Operation, Belt Inspection Drive, Auto Fan Cut Off, Automatic Rescue operation, Voice Synthesizer and Intercom complete., as directed by the engineer in charge. Make: Johnson lifits & Escalators
1
-
-
SUB HEAD 7- FLOORING
-
-
-
Providing and laying Polished Telephone Granite stone flooring and wall skirtingfor all heights including wastage in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified in the drawings and as directed by the Engineer-in-Charge.
49
-
-
Providing and laying Makrana White marble edging stone flooring and wall skirtingfor all heights including wastage in required design and patterns for all heights with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing etc. all complete as specified in the drawings and as directed by the Engineer-in-Charge.
57
-
-
Providing and laying polished telephone black granite and Makrana White marble flooring and wall skirtingfor all heights including wastage in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ( Flooring pattern-1)
85
-
-
Providing and laying polished telephone black granite and Makrana White marble flooring and wall skirting for all heights including wastage in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified in the drawings and as directed by the Engineer-in-Charge.( Flooring pattern-2)
197
-
-
Providing and laying polished telephone black granite and Makrana White marble flooring and wall skirting for all heights including wastage in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified in the drawings and as directed by the Engineer-in-Charge.( Flooring pattern-3)
619
-
-
Providing and laying polished telephone black granite and Makrana White marble flooring and wall skirting for all heights including wastage in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified in the drawings and as directed by the Engineer-in-Charge.( Flooring pattern-4)
19
-
-
Providing and laying polished telephone black granite and Makrana White marble flooring and wall skirting for all heights including wastage in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified in the drawings and as directed by the Engineer-in-Charge. ( Flooring pattern-5)
36
-
-
Providing and laying polished telephone black granite and Makrana White marble flooring and wall skirting for all heights including wastage in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified in the drawings and as directed by the Engineer-in-Charge.. ( Flooring pattern-6)
139
-
-
Providing and laying plain yellow jaisalmer slab and wall skirting for all heights including wastage in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including wall skirting, rubbing , curing and polishing etc. all complete as specified in the drawings and as directed by the Engineer-in-Charge.
267
-
-
Providing and laying leather finish silver gray granite flooring and wall skirting for all heights including wastage in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including wall skirting, rubbing , curing and polishing etc. all complete as specified in the drawings and as directed by the Engineer-in-Charge.
390
-
-
Providing and laying heritage patterned tulip tile in yellow and white Jaisamler stone of size 200mm x 200mm and wall skirting for all heights including wastage in required design and patterns, in linear as well as curvilinear portions as per the architectural over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge
219
-
-
Providing and laying heritage patterned tulip tile in terracotta stone of size 200mm x 200mm and wall skirting for all heights including wastage in required design and patterns, in linear as well as curvilinear portions as per the architectural over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge
38
-
-
Providing and laying kajaria fog perla glazed vitrified tile flooring of size 600mm x 600mmand wall skirting for all heights including wastage in required design and patterns, in linear as well as curvilinear portions as per the architectural over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge
1300
-
-
Providing and Fixing plain terracotta slab marble flooring and wall skirting for all heights including wastage in required design and patterns, in linear as well as curvilinear portions as per the architectural over 20 mm(average) thick base of cement mortar 1:4(1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge
24
-
-
Providing and laying Plain terracotta slab edging and wall skirting for all heights including wastage in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified in the drawings and as directed by the Engineer-in-Charge.
30
-
-
Providing and laying10x10x10 cm machine cut Grey Granite cobble stone flooring & edging for paving in floors and open spaces etc., and wall skirting for all heights including wastagein required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified in the drawings and as directed by the Engineer-in-Charge.
560
-
-
Providing and laying Porphyry black granite and kadla Cobblestone flooring & edging and wall skirting for all heights including wastage in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified in the drawings and as directed by the Engineer-in-Charge.
70
-
-
Providing and laying broken china mosaic flooring for terrace using 12mm to 20mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar crème out up to surface using white cement including wall skirting ,rounding of junctions and extending them up to 18 cm along the wall, clearing with water and oxalic acid etc as directed.
452
-
-
SUB HEAD 8- WOODEN ROOF
-
-
-
Providing and fixing roof/Structure using Second class teak wood timber including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete as per drawing and directions of Engineer-in-charge
15
-
-
Providing and fixing roof/Structure using Indian teak wood timber including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete as per drawing and directions of Engineer-in-charge
17
-
-
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm Nominal thickness and of approved size 250x400x20 mm or approved by EIC location-Morbi Gujarat/equivalent and as per approved pattern on wooden frame work complete (wooden frame work to be paid separately).
444
-
-
Providing and laying integral cement based brickbat coba water proofing treatment including preparation of surface With average thickness of 120 mm and minimum thickness at khurra as 65 mm as required for treatment of roofs,balconies, terraces etc consisting of following operations and furnishing a guarantee bond of 10 years: a) Applying a slurry coat of neat cement using 2.7 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approve by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
676
-
-
SUB HEAD 9- PLUMBING, RAIN WATER DRAINAGE SYSTEM/ VENTILATION SYSTEM
-
-
-
Providing and fixing White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
20
-
-
Providing and fixing Exposed Part Kit of Single Concealed Stop Cock Consisting of Operating Lever, Cartridge Sleeve, Wall Flange (with Seals) & Basin Spout, polished chrome coloured complete.
20
-
-
Providing and fixing Single piece-WC with UF soft close slim seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, of size 350x665x750 mm and 180mm P trap, white coloured complete. Make: Somany /equivalent
16
-
-
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern
10
-
-
Providing and fixing Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish and Wall Hook with N.R.V (Back Flow Preventer) , polished chrome coloured complete. Make: Somany/equivalent
20
-
-
Providing and fixing 2 Way Bib Cock with Wall Flange along with accessories, polished chrome coloured complete. Make: Somany/equivalent
16
-
-
Providing and fixing wall mounted paper towel dispenser with capacity of 400-600 C/Z towels made of stainless steel AISI 304 in satin finish complete. Make: Jaquar /equivalent
16
-
-
Providing and fixing speed flow hand dryer made of stainless steel AISI 304 in satin finish complete. Make: Jaquar /equivalent
12
-
-
Providing and fixing soap dispenser made of aluminium / ADB in Chrome/Black finish complete. Make: Jaquar /equivalent
12
-
-
Providing and fixing marble stone slab with table rubbed, edges rounded and polishedof size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-incharge and finished smooth
3
-
-
Providing and supplying, Lowering, laying, fixing and jointing in standard length ISI mark rigid unplasticised PVC 110 mm dia Class 3 6kg/cm2 pipes suitable for Rain water / potable water with ring fit joint including cost of rings, as per IS specification no. 4985/1988 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores and including cost of jointing meterial etc. complete.
268
-
-
Providing, fixing and embedding 75mm dia pipe sand cast iron rain water pipes in the masonry surrounded with 12mm thick cement mortar of the same mix as that of masonry
170
-
-
Providing and fixing 20 mm dia Nominal bore G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls which are exposed on wall (internal work) etc.
18
-
-
Providing and fixing 25 mm dia Nominal bore G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls which are exposed on wall (internal work) etc.
18
-
-
Providing and fixing 15 mm dia Nominal bore G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall
45
-
-
Providing and supplying ISI mark 25 mm G. I. pipes with Couplings of medium duty class and diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. (IS -1239)
220
-
-
Lowering, laying and jointing G. I. pipes with G. I. specials of following diameters in proper position, grade and alignment as directed by Engineer-in-charge including conveyance from stores to site of work, labour, giving hydraulic testing, etc. comple
220
-
-
Providing and fixing concealed centre point to wall ceiling & floor CPVC (SDR 13.5) pipe having national sanitation foundation (NSF) seal for potable water and recycle water of 25 mm dia No.minal bore tube fittings and clamps including making good the wall, ceiling and lfoor etc., complete.
214
-
-
Providing and fixing concealed centre point to wall ceiling & floor CPVC (SDR 13.5) pipe having national sanitation foundation (NSF) seal for potable water and recycle water of 20 mm dia No.minal bore tube fittings and clamps including making good the wall, ceiling and lfoor etc., complete.
407
-
-
Providing laying (to level or slopes) and jointing reinforced concrete Light duty No.n-pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.(B) 150mm (upto 10 ton)
70
-
-
Providing, laying and jointing in true line and level 110 diameter U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with No.. other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.
75
-
-
Providing, laying and jointing in true line and level 75mm diameter U.P.V.C (Type A) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with No.. other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 75 mm diametre x 114 mm length x 110 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.
128
-
-
Providing and installation of single phase centrifugal 1 HP Horizontal Centrifugal Mono-Block Pump. including labour, material, loading, unloading etc. as directed by Engineer-in-charge.
2
-
-
Providing and fixing of C.I. cover with frame manhole of size 0.6x 0.85m
2
-
-
Providing and fixing square-mouth S.W. gully trap class SP-1 of size 100x100 mm complete with CI grating and brick masonry chamber of common burnt clay F.P.S. (non modular bricks of class designation 7.5 with water tight RCC precast cover and frame of 300 x300 mm size (inside) complete.
2
-
-
Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement :1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. Cover with frame 455x610 mm internal dimensions with common burnt clay F.P.S. (non modular bricks of class designation 7.5 complete.
2
-
-
Providing and fixing CPVC (SDR 13.5) pipe for potable water and recycle water supply of 20 mm dia No.minal bore tube fittings and clamps etc., complete as directed by the Engineer-in-Charge.
216.96
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete as directed by the Engineer-in-Charge.
2
-
-
Providing and installation of single phase centrifugal 1 HP Horizontal Centrifugal Mono-Block Pump. including labour, material, loading, unloading etc. as directed by Engineer-in-charge.
3
-
-
Providing and fixing of C.I. cover with frame manhole of size 0.6x 0.85m for sump
2
-
-
SUB HEAD 10- ELECTRICAL WORKS
-
-
-
Fan Point Wiring:Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling complete with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed.(a) with medium class Rigid PVC pipe and accessories Cat. III
30
-
-
Light Point Wiring:Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/ on surface on wall/ceiling complete with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories. Cat-III
958
-
-
3 wire 2.5 sq. mm PVC copper Cable Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size with medium class Rigid PVC pipe and accessories (b) 3 wire 2.5 sq. mm
825
-
-
3 wire 4 sq. mm PVC copper Cable Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size(b) (d) 3 wire 4 sq. mm
335
-
-
ONE AND HALF INCH PVC CONDUIT Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed
1160
-
-
6Amps Individual Point wiring:Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [I] For 6A Plug with 2-1.5 sq.mm Cu. Wire. (a) with medium class Rigid PVC pipe and accessories. Cat-III
143
-
-
16Amps Individual Point wiring:Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories.[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire. (a) with medium class Rigid PVC pipe and accessories. Cat-III
26
-
-
Junction Boxes:Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) (A) Single phase 4 way single door
4
-
-
MCB distribution board:Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) (I) Three phase 4 way single door for single phase outgoing horizontal box
8
-
-
Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity (A) 6 to 32 Amp. Cat.III
4
-
-
Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark. Cat-III
112
-
-
Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity. (A) 32 Amp. Cat-III
48
-
-
Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on 3 phase and neutral 415V. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component for following Max. rating erected as directed. (ii) 40Amps. FP. Cat-III
18
-
-
Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup time 1 minimum & LCD display. Also comporised permanent ON/OFF switching. Programming switches & housed in fire proof thermoplastic enclosure & transperent cover erected as required with necessary connection.
18
-
-
Providing and erecting HOT deep Galvanised strip iron wire 8 to 16 S.W.G.
100
-
-
Supplying & erecting approved make low noise decorative exhaust fan having size 200mm with 1350 RPM with square frame ABS body with inbuilt lowers & square frame.
24
-
-
Supply, erection and commissioning of the lighting DB 80A 3P 30kA MCCB,TMD (Fixed Thermal Magnetic) Release,Type: EasyPact EZC,Red Color LED Indicator 22.5 mm, Voltage: 220V AC,Yellow Color LED Indicator 22.5 mm, Voltage: 220V AC,AC3: 80A AC1: 110A 3P Power Contactor,Coil: AC ,Aux. contact: 1NO+1NC,3 Phase Multi Function meter (4x1 line Display),75/5A 5VA Tape Wound Acc. Cl: 1 Current Transformer, ID: 30mm,6A 1P 10kA C-Curve MCB,Type: xC60,Digital timer with 15 functions and 8 Time ranges,32A 3P 10kA C-Curve MCB,Type: xC60
5
-
-
Supplying & erecting in earthpit of minimum bore dia. 225mm size ASH or approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA)i.e. independent Earthing located in other than normal soil i.e. Soft Rock, Marshy Soil etc..
-Length of Pipe : 3 Mtrs. -Back filling Compound :2 nos Bags of 25 Kg.
10
-
-
Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size (N) 4 core 16 Sq. mm
170
-
-
Providing and supplying 50mm HDPE pipe in standard length ISI mark high density Polyethylene H.D.P.E. Pipes suitable for potable water as per IS specification no. 4984/1995 including all local and central taxes, transportation, freight charges, octroi,inspection charges, loading, unloading, conveyance to the dept. stores etc. comp.
700
-
-
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (b) 2 to 4 core 4 Sq. mm
257
-
-
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (e) 2 to 4 core 16 Sq. mm
26
-
-
Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 1.5/ 2.5/4/6 Sq.mm
1087
-
-
Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (c) 16 Sq.mm
104
-
-
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (D) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core)
400
-
-
Lowering, laying and jointing of 50mm HDPE pipes and specials of following class and diameter (By butt fusion welding method) including cost of conveyance from stores to site of works at all level including cost of labour, material, giving satisfactory hydraulic testing etc. comp.
700
-
-
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (D) 3 & 1/2 core 95 Sq. mm
21
-
-
Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (G) 95 Sq.mm.
36
-
-
Supplying and erecting Direct - On - Line Starter with 18 A. rating contactor and with 3.5 Amp. 18A range directly operated in totally insulated elegant enclosure for single phase operation up to 3 HP as per IS 13947 complete erected on P.W. Block with necessary connection.
2
-
-
Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size. (E) 3 core 2.5 Sq. mm
220
-
-
Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity (A) 6 to 32 Amp. Cat.III
2
-
-
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.
162
-
-
Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.
12
-
-
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (B) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)
400
-
-
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (B) 3 & 1/2 core 35/50 Sq. mm
32
-
-
Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (E) 35/50 Sq.mm.
80
-
-
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (F) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core)
100
-
-
Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size (A) 2 core 2.5 Sq. mm
474
-
-
Corrugated DWC HDPE pipes (75mm) :Providing and supplying of Class SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground system as per EN:13476-3 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores etc. complete.(ID Dia) A)75MM HDPE PIPE
300
-
-
Lowering, laying and jointing of class SN 8 structured wall ( External Annular Corrugated & Smooth Internal surface) Polyethylene Piping and fittings with the help of coupler ( on line / off line ) attached with one end of pipes, sliding over the elastomeric sealing rubber ring placed on the specified valley of the corrugation at the spigot end, lowering the same into the trench at all level, laying on the lower bedding (constructed at bottom of trenches) at prescribed gradient,depth & alignment ,testing the water tightness of the joints, ensuring the continuity tests of specified pipe segments etc. complete as per drawing,specifications & detailed engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge.
300
-
-
Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc. complete of following sizes.(3) 32 mm
474
-
-
Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc. complete of following sizes.(4) 40 mm
260
-
-
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.((F) 3 & 1/2 core 150 Sq. mm
16
-
-
Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (I) 150 Sq.mm.
16
-
-
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) (N) Three phase 8 way SS Double door for horizontal single phase outgoing
10
-
-
Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity (A) 6 to 32 Amp.Cat.III
120
-
-
Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity (b)40 Amp Cat.III .
5
-
-
L01-Surface mounted metal housing LED updown light fixture (12W):Supply and Installation of the Wall up-down lighter of model Quad Mini 3636 ,Lumens of 786 lumens color temperature 3000K,beam angle15/25/40 degrees,Dimensions -150mmX100mmX210mm,IP Protection IP44,Accessories of the fixture Mounting acc,Grey Finish/ Black Finish,operating voltage of 240V AC
36
-
-
L02-Surface mounted metal housing LED Downlighter, light fixture (12W)::Supply and Installation of the K-lite make surface mounted light of model Quad Mini 140 ,Lumens of 900,color temperature 3000K, beam angleof 36 degrees,Dimensions Sq 100 x 160mm,IP Protection IP65
38
-
-
L03-LED batten light fixture (54):Supply and Installation of thebatten light fixture of ,Lumens of 4700,color temperature 3000K, Diffuse beam angleof,Dimensions H-1200mm,IP Protection IP40
25
-
-
L04-Recessed wall lighting IP65 Tiny Large LED (3W): Supply and Installation of the recessed wall light of model KL-2758 ,Lumens of 840,color temperature 3000K,Asymmetrical beam angleof ,Dimensions Sq.105X35mm,IP Protection IP65,fixture finish Graphite Grey Finish/ Black Finish,
45
-
-
L05-Recessed LED step light (6W): Supply and Installation of the recessed LED step light of model KL-2747 , light output, pressure die cast aluminium alloy of high corrosion resistance and non corrosive A2 stainless steel fasteners.Suitable for operation on 240V, 50Hz single phase ac supply, Lumens of 420/840Lm,color temperature 3000K,Asymmetrical beam angleof ,Dimensions 124 x 70 x 83mm,IP Protection IP65,,Fixture finish of Graphite Grey Finish/ Black Finish
49
-
-
L06-Spotlight (6W):Supply and Installation of the spot light IP65 101 x 64 x 93mm LED 6W 3000K Brown 643lm,Luminaire made of aluminium alloy with non corrosive SS fasteners,Clear tempered safety glass diffuser retained by aluminium frame, Extruded aluminium hood cover for directional light throw. Luminaire prewired with LED driver and Suitable for operation on 240V, 50Hz single phase ac supply. Protection paint .bracket mounted Graphite Grey Finish/ Black Finish,Luminaire prewired with LED driver and Suitable for operation on 240V, 50Hz
28
-
-
Flexible Led Strip(6W):Supply and indstallation of the LED strip of wattage 12W,Every section includes three LEDs, Cut to the desired length and mount wherever required,Integrated with SMD 2835 LEDs,Constant current LED driver (5Amp),Colour rendering index (CRI) is 90,Low Voltage at 12V dc assures safety.CCT of the strip 2700-6000K
28
-
-
L07-Recessed Inground Diffused Light (1 W): Supply and Installation of the Luminaire body made of stainless steel tube and front ring made from solid billet of stainless steel.Silicone seal gasket.Luminaire hard wired with 3 x 1.0mm2 cable of 1mts length.Suitable for operation on 240V, 50Hz single phase ac supply.Protection class IP65Supplied with mounting sleeve for preparing recessed opening inground Dimensions of the fixture Ø53mm
70
-
-
L08-Post top mounting (25W) :Supply and Installation of the post topThe luminaire comprises of specially contoured spun aluminium body with supporting bracket,Non yellowing, UV stabilised, convex type translucent acrylic diffuser / V translucent diffuser / V clear diffuser.Die cast aluminium base suitable for mounting on 38mm dia pole.Protection class IP54.Suitable for operation on 240V, 50Hz single phase ac supply. Polycarbonate (PC). Brass and stainless steel fasteners. Standard surge protection for differential/common mode 6kV/10kV, Modular (2 X 2) refractive lens in PMMA.color temperature of 3000K ,4500 lumens,Type IIA Beam Angle,Dimensions of Ø300 x 550mm Post (3.5 Meter pole) - 3.5 Meter Height 3.5M height Pole Made in combination of mild steel pipe sections 114mm dia. & 76mm dia. Decorative Cast iron Base design with the company/brand logo engraved in the cast iron mould, starting with dia 260mm for 130mm height, followed by a ring of 260 dia gradually tapering to a flat round surface of dia 170mm for 366mm height again followed by a ring dia 210mm and gradual tapering up to a dia 92mm as approved by the concerned Engineer the total height of decorative cast iron base is 700mm and weight-32kgs. After Fabrication, Entire Pole is hot dip galvanized(60 microns Minimum ) for the effective corrosion resistance . The hot dip Galvanised pole should be provided with an inbuilt junction box to fix 32A connectors and 6A MCB, at the bottom - the inbuilt box should have a flush door of suitable size. The decorative pedestal to be mounted on a suitable size steel plate. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed RCC foundation. wind pressure calculation as per IS 875(part-3) & structural calculation report as per EN40 should be submitted to verify the pole design
12
-
-
WL1-Wall mounted LED Decorative Light (13W) :Supply and Installation of the K-lite make wall mounted decorative LED light of wattage 13watts having the lumens of 1521lm color temperature of 3000K,Direct Beam angle,IP44 Protection.Model of aspen Pyro Mini.fixture finishing of pure polyster powder coated black.Dimensions of the fixture 232 x Ø194 x 216mm
39
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements