Municipal Council Tender

Dismentling doors, windows, ventiletors, etc. (wood and steel) shutters including cchowkhats architraves, hold fast and other attachment etc. completeand stacking them within all lead and leaft(I)not exceeding 3 .oo sqmt in area .

Dismentalling tiled of stone floors laid in mortar including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift.

Dismentalling santtary fittings like wash basin. W.C. pan Indian and European type, flushing tank etc. including stacking the materials with all lead and lift.

Removing and scraping of old deteriorateed plaster of any thickness from wall/ R.C.C. member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift.

Providing and laying ordinary cement concrete 1:2:4(1- cement 2- coarse sand 4- graded stone aggregates 20mm nominal size) for R.C.C lintel including finishing smooth with, curing etc. complete incuding the cost of formwork but excuding the cost of reinforcement.

Providing and laying cement concrete work 1:1½:3 ( 1- cement: 1½- coarse: 3- graded stone aggregate 20mm nominal size) and finishing smooth with curing etc. complete including the cost of formwork but excl. the cost of reinforcement. For R.C.C. work in Slabs having more than 10 cm and upto 13 cm thickness. upto floor two level (incl. cost af materials and labours).

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including bending, binding and placing in position complete above floor two level( upto 10 ton)

white bela stone masonary blockin course I superstructure withwhite stone of approved quality in cement mortar 1;6 (1-cement : 6-coarse sand) including packingthe joints etc. complete.

Providing and laying marble stone slab flooring over 20mm (average)base of cement morter 1:6 (1-cement : 6 coarse sand) or L.M. 1.1.5 (1- lime putty : 1.5 - coarse sand) laid and jointed with gray cement slurry including rubbing and polishing complete. (A) Marble slab 25mm in jams and sill of windows

Providing 15mm thick cement plaster in single coat on Rough (Similar) side of single or half brick walls for interior plasterting upto floor two level and finished even and smooth in (ii) cement mortar 1:4 (1-cement : 4- sand)

20mm thick sand faced cement plaster on wall upt0 10 meters above ground level consisting of 12 mm thick backing coat of C.M. 1;3 (1-cement ; 3-sand) and 8 mm thick finishing coat of C.M. 1;1 (1-cement : 1-sand) etc complete.

Providing and laying ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3(1- cement: 3- coarse sand) finishing with flush pointing in white cement.

Providing and laying ceramic tiles 6mm thick in skrting of steps and dedo on 10mm thick cement plaster 1:3 (1- cement: 3- coarse sand) and jointed with white cement slurry.

Providing and fixing 30mm thick FACTORY MADE SOLID BOTH SIDE PRELAM PANEL PVC DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, top and bottom rails. M.S. frame shall have a coat of steel primer of approved makde and manufactures. M.S. frame covered with 5mm thick heat moulded prelim PVC 'C' channel of size 30mm thickness, 70mm width of which 50mm shall be flat and 20mm shall be tapered in 45 degree Angle on either side forming stiles, and 5mm thick, 95mm wide pream PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side ot form top and bottom rail and 115mm wide prelim PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both side to form lock rail, top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick 20mm wide cross PVC sheet shall be provided as gap insert for top rail and bottom rails. Panelling of 5mm thick both side prelim PVC sheet to be fitted in the M.S. frame welded, sealed to the stiles and rails with 7mm (5mm + 2mm) thick x 15mm wide PVC sheet beading on inner side, and joined togeth with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' chanel using PVC solvent adhesive etc. complete as per direction of Engineering in charge. manufacture's specification and rawing.

Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows including blackenamelled M.S. butt hinges with necessary screws. (A) Indian teak wood. (i) Fully Panelled.

Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including kointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement: 1- fine sand) (Seal and cover to be measured and paid for separately) (A) vitreous China Pattern : (i) in white colour.

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. bracket painted white including sutting holes and macking good the same but excluding fitings. (A) Vitreous china: (ii) Flut back washbasin 550mm x 400mm size. (i) in white colour.

Providing and fixing C.P. brass waste for washbasin of sink. (A) 32mm dia.

Providing and fixing M.I. fisher union for washbasin of sink. (A) 32mm dia.

Providing and fixing Urinal of approved quality including connection with trap and with integral longitudinal flush pipe. (A) squating plate pattern white earthenware 550mm X 300mm.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe (SCH - 40) for cold water incuding fittings as approved by Engineer in Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe (SCH - 40) for cold water incuding fittings as approved by Engineer in Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing and fixing Rubber plug for sink or wash basin.

Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia.

Providing and fixing Gun metal check or non-return fullway wheel valve. (A) 15mm dia.

Providing and fixing Gun metal check or non-return fullway wheel valve. (A) 25mm dia.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the following nominal diameter of self cleansing with C.I scread down or hinged grating including the cost of cutting and making good the walls.

Providing and fixing plastic seat and cover for wash down water closer with C.P. brass hinges and rubber buffer. (B) Black plastic seal and cover.

Providing and fixing screw down bib taps of following size. (B) Brass chromium plated screws down bib tap. (i) 15mm dia.

Providing and fixing chromium plated brass half turn flush cock of approved quality incl. fixing in pipeline etc. complete. (i) 20 mm dia.

Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mildbrackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass handle unions and couplings for connection, with inlet, outlet and overflow pipes, 40,, dia. porcelain enamelled flush bend including cuttingholes in walls and making good the same connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) (A) vitreous China (i) In white colour.

wall painting ( two coats) with plastic emulsion paint of approved brand and manufacture on undecorative wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth

Finishing wall with weather proof exterior emulsion paints on wall surface ( two coats) to give an required shape even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials, etc complete.

Point wiring for light/bell with 2-1.5 sq./mm & earth wire of 1.s sqm.mm (green) both are of ISI marked 1.1 KV grade FR PVC insulated multistrand copper wires, in existing pipe duly errected complete with 6A modular type switch/bell push & accessories and earth continuty of following type, erected on PVC /Metallic box covered with appropriate front plate modules errected on/ in wall/ celling as per pipe errecte, with necessary lamo holder/ceiling rose/H.D. connector as directed(c) with oval conduit/PVC casing capping double lock type Cat.III

Point wiring for Individual Plug with & earth wire of with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 Kvgrade FRLS PVC insulated multistrand copper wires, in following type of pipe to be errected concealed in/flushed on wall/ceiling complete with 6A Modular type switch and 5 pin plug erected on PVC /Mettalic box covered with appropriate fornt plate modules errected on/in wall/celing as per pipe errected with following type of accessories. (I) foe A Plug with 2-1.5 sq.mm cu. wire. (c) withoval conduit/PVC casing capping double lock type Cat.iii

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paints, interior to give an even shade including cleaning the surface of all dirt, dust and other foreign matter papering and stopping.

Supplying & erreccting of approved make of fluorescent tube120 cms 36/40 watt Cat. iii

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flished on wall /ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size. (a) with medium class Rigid PVC pipe and accessories. (a) 2 wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flished on wall /ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size. (d) partial pvc pipe and drops in oval conduit / pvc casing capping. (b) 2 wire 2.5 sq. mm as per approved brand by Engineer in Charge.

Providing and fixing window having extruded aluminium Colour anodized section frame main outer size 95 mm X 24mm X 1,17 mm @ wt. of 0.738 kg/mt) horizontal three track member size 92 mm x 31 .75 mm x 1.30mm @ wt 1.07 kg/mt ) vertical members of size 92mm x 31.75 mm x 1.50 mm @ wt 1.06 kg/mt with sliding shutters of horizontal member size 40 mm X 18 mm X 1.29 mm @ wt of 0.456 kg/mt) vertical member of size40mm x 18mm x 1.29mm @ wt. of 0.456kg/mt/ with 5mm thick transperent bronze colour tinted float glass with power coated alluninium fittings and fixture and transperent silicon sealent glass fixed to frame as details etc.