UT Administration Of Daman And Diu Tender
View complete overview of Dadra & Nagar Haveli UT Administration Of Daman And Diu Tender
UT Administration Of Daman And Diu Tender
Civil Works Buildings
Eprocure
Opening Date30 May 2020
Closing Date18 Jun 2020
Tender Amount₹ 31,29,76,552
Costs
EMD
₹ 42,67,300Document Cost
₹ 5,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_UTDNH_4667_1Bid Award Id
ViewTender No
E-TENDER NOTICE NO.04 OF 2020-21Tender Authority
UT Administration Of Daman And Diu ViewPurchaser Address
-Website
http://https://daman.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing material and labour for Excavation of foundation from 5.0 mt to 7.0 mt depth including sorting out and stacking of useful materials and disposing off the excavated stuff with in the campus for all lead, all lift/ depth and back filling foundations, the trenches, plot filling, plinth filling with excavted material (excluding hard rock and black cotton soil) anywhere from the site/ campus etc complete as directed by Engineer in charge. - Any type of soil or rock not requiring Blasting.
4482
-
-
... More
Providing material and labour for Disposing off the un-used excavated earth (black cotton soil), debris, malba, dismantled materials for all lead and lift/ depth out side the campus at non objectional place as directed by Engineer in charge.
15210
-
-
... More
Providing material and labour for Filling in plinth with sand under floors or base of foundation including watering ramming, consolidating and dressing etc complete as directed by Engineer in charge.
80
-
-
... More
Providing material and labour for Filling in foundation, plinth and plot filling with murrum (brought from out side) in layers of 20cm. thickness including watering, ramming and consolidating etc complete as directed by Engineer in charge.
573
-
-
... More
Providing material and labour for injecting Chemical emulsion for PRE - CONSTRUCTIONAL anti-termite treatment and creating a chemical barrier on the top surface of plinth filling, inside junction of wall and floor, on top of damp proof course (DPC) or on masonry at level of plinth filling as per IS 6313 (Part-2)-1981 using chemical like chloropyripos emulsifiable, Biflex TC, lindane (IS 8944-1978) 20EC mixed with water in 1:19 ratio (1 liter chemical : 19 liters of water). The emulsion shall mentioned below, all as per specification and directions of Engineer-in-charge. Plinth area in plan at GF shall only be measured (for akk below specified steps) and paid. A guarantee bond of 10 years shall be furnished. A1) Bottom surface and the sides of the excavation made for masonry foundations at the rate of 4 liters/sqm (wherever applicable)
A2) At the rate of 7.5 liter/ sqm to the backfill at the depth of 500mm below the original ground level. The soil in the immediate contact with the vertical surface of RCC column/ Masonry shall be treated.
B) Top surface of the plinth filling including damp proof courses at the rate of 5 liter/sqm of internal plinth area etc. complete.
C) At the rate of 7.5 liter/ sqm to the internal vertical surface from original Ground level to top of the earth filled in the plinth.
D) At the rate of 7.5 liter/ sqm to the external vertical surface below finished Ground level to the full depth of the filling complete.
E) 1 liter / linear meter along the junction of wall and floor at all stages.
3946
-
-
... More
Providing material and labour for Boring holes of 300mm dia in any type of soil (for cast in situ piles) upto required depth and getting out the soil and disposal of the surplus excavated soil within a site/ campus with all lead and lift as directed by Engineer in charge.
1388
-
-
... More
Sec: 2.0 PCC & RCC works
Providing material and labour for laying Autoclave Aerated Concrete Block chips/ bats cement concrete in 1:4:8 (1 Cement : 4 Coarse Sand : 8 graded Autoclave Aerated Concrete Block chips/ bats) for sunk filling grade including compacting, finishing, curing etc. complete as directed by engineer in charge.
50
-
-
... More
Providing material and labour for laying Plain cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6- crushed stone aggregates 20 mm nominal size) in Foundation and Plinth including cost of formwork, compacting, finishing, curing etc complete for all level, all height/ depth as directed by engineer in charge.
1248
-
-
... More
Providing material and labour for laying Plain cement concrete M15 in Foundation and Plinth including cost of formwork, compacting, finishing, curing etc complete for all level, all height/ depth as directed by engineer in charge.
691
-
-
... More
Providing material and labour for fixing TMT Bar FE 500D reinforcement for R.C.C. work including cutting, bending, binding with 18 SWG -1.22 mm GI wire and placing in position etc complete for all floors, all levels, all heights/ depth as per drawings, specifications and direction of Engineer in Charge.
781601
-
-
... More
Providing material and labour for laying controlled cement concrete M-20 produced in batch mix machine using graded, black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work for all elements, all floors, any heights/ depths, any lead and lift including cost of formwork, compacting, finishing, curing but excluding the cost of reinforcement etc complete as directed by engineer in charge.
215
-
-
... More
Providing material and labour for laying controlled cement concrete M-25 produced in batch mix machine, using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work for all elements, all floors, any heights/ depths, any lead and lift including cost of formwork, compacting, finishing, curing but excluding the cost of reinforcement etc complete as directed by engineer in charge.
293
-
-
... More
Providing material and labour for laying controlled cement concrete M-30 produced in batch mix machine, using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work for all elements, all floors, any heights/ depths, any lead and lift including cost of formwork, compacting, finishing, curing but excluding the cost of reinforcement etc complete as directed by engineer in charge.
30
-
-
... More
Providing material and labour for laying controlled cement concrete M-35 produced in batch mix machine, using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work for all elements, all floors, any heights/ depths, any lead and lift including cost of formwork, compacting, finishing, curing but excluding the cost of reinforcement etc complete as directed by engineer in charge.
30
-
-
... More
Providing material and labour for laying in position Ready Mixed M-20 grade concrete for reinforced cement conctere work, using cement content as per approved Design Mix without Fly Ash (Min cementitious level as per latest IS 456 shall be maintained) manufactured in fully automatic batching plant and transported to site of work in transit mixer for all lead having continuous agitated mixer, as per mix design for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying; cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability; finishing, compacting, vibrating, curing etc including cost of Form work but excluding the cost of reinforcement etc complete for all elements, all floors, any heights/depths, any lead and lift as directed by Engineer Incharge.
30
-
-
... More
Providing material and labour for laying in position Ready Mixed M-25 grade concrete for reinforced cement conctere work, using cement content as per approved Design Mix without Fly Ash (Min cementitious level as per latest IS 456 shall be maintained) manufactured in fully automatic batching plant and transported to site of work in transit mixer for all lead having continuous agitated mixer, as per mix design for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying; cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability; finishing, compacting, vibrating, curing etc but excluding the cost of reinforcement etc complete for all elements, all floors, any heights/depths, any lead and lift as directed by Engineer Incharge.
336
-
-
... More
Providing material and labour for laying in position Ready Mixed M-30 grade concrete for reinforced cement conctere work, using cement content as per approved Design Mix without Fly Ash (Min cementitious level as per latest IS 456 shall be maintained) manufactured in fully automatic batching plant and transported to site of work in transit mixer for all lead having continuous agitated mixer, as per mix design for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying; cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability; finishing, compacting, vibrating, curing etc including cost of Form work but excluding the cost of reinforcement etc complete for all elements, all floors, any heights/depths, any lead and lift as directed by Engineer Incharge.
5039
-
-
... More
Providing material and labour for laying in position Ready Mixed M-35 grade concrete for reinforced cement conctere work, using cement content as per approved Design Mix without Fly Ash (Min cementitious level as per latest IS 456 shall be maintained) manufactured in fully automatic batching plant and transported to site of work in transit mixer for all lead having continuous agitated mixer, as per mix design for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying; cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability; finishing, compacting, vibrating, curing etc including cost of Form work but excluding the cost of reinforcement etc complete for all elements, all floors, any heights/depths, any lead and lift as directed by Engineer Incharge.
250
-
-
... More
Providing material and labour for fixing in position PVC pipe sleeves of 50mm Diameter - 6Kg/cm2 and length as per design for following diameters for services wherever pipes pass through walls/ slabs/ beam in mtrs length. All pipes shall be accurately cut to the required sizes, laid as per drawing, kept in the position while concreting, and burrs removed before laying etc complete for all floors, all height as directed by engineer in charge. Open ends of the pipe shall be closed as the pipe is installed to avoid clogging while concreting. Pipe sleeve shall be removed before water proofing or grouting (at rain water down take location).
100
-
-
... More
Providing material and labour for fixing in position PVC pipe sleeves of 75mm Diameter - 6Kg/cm2 and length as per design for following diameters for services wherever pipes pass through walls/ slabs/ beam in mtrs length. All pipes shall be accurately cut to the required sizes, laid as per drawing, kept in the position while concreting, and burrs removed before laying etc complete for all floors, all height as directed by engineer in charge. Open ends of the pipe shall be closed as the pipe is installed to avoid clogging while concreting. Pipe sleve shall be remoed before water proofing or grouting (at rain water down take location).
50
-
-
... More
Providing material and labour for fixing in position PVC pipe sleeves of 110mm Diameter - 6Kg/cm2 and length as per design for following diameters for services wherever pipes pass through walls/ slabs/ beam in mtrs length. All pipes shall be accurately cut to the required sizes, laid as per drawing, kept in the position while concreting, and burrs removed before laying etc complete for all floors, all height as directed by engineer in charge. Open ends of the pipe shall be closed as the pipe is installed to avoid clogging while concreting. Pipe sleve shall be remoed before water proofing or grouting (at rain water down take location).
50
-
-
... More
Providing material and labour for fixing in position PVC pipe sleeves of 160mm Diameter - 6Kg/cm2 and length as per design for following diameters for services wherever pipes pass through walls/ slabs/ beam in mtrs length. All pipes shall be accurately cut to the required sizes, laid as per drawing, kept in the position while concreting, and burrs removed before laying etc complete for all floors, all height as directed by engineer in charge. Open ends of the pipe shall be closed as the pipe is installed to avoid clogging while concreting. Pipe sleve shall be remoed before water proofing or grouting (at rain water down take location).
50
-
-
... More
Providing material and labour for wet drilling accurate and clean holes of specified diameter in RCC walls, slabs, beam or any other RCC member without vibration by core cutting (diamond drilling) holes from 51 to 77mm dia machine including scafolding, safety majors, disposing the debris, cleaning for all floors, all height etc compete as directed by engineer in charge. Measurement shall be taken for the depth of holes in running meter for specified diameter. Holes shall made by authorised approved agency.
10
-
-
... More
Providing material and labour for wet drilling accurate and clean holes of specified diameter in RCC walls, slabs, beam or any other RCC member without vibration by core cutting (diamond drilling) holes from 77 to 102mm dia machine including scafolding, safety majors, disposing the debris, cleaning for all floors, all height etc compete as directed by engineer in charge. Measurement shall be taken for the depth of holes in running meter for specified diameter. Holes shall made by authorised approved agency.
10
-
-
... More
Providing material and labour for wet drilling accurate and clean holes of specified diameter in RCC walls, slabs, beam or any other RCC member without vibration by core cutting (diamond drilling) holes from 102 to 125mm dia machine including scafolding, safety majors, disposing the debris, cleaning for all floors, all height etc compete as directed by engineer in charge. Measurement shall be taken for the depth of holes in running meter for specified diameter. Holes shall made by authorised approved agency.
10
-
-
... More
Providing material and labour for wet drilling accurate and clean holes of specified diameter in RCC walls, slabs, beam or any other RCC member without vibration by core cutting (diamond drilling) holes from 125 to 152mm dia machine including scafolding, safety majors, disposing the debris, cleaning for all floors, all height etc compete as directed by engineer in charge. Measurement shall be taken for the depth of holes in running meter for specified diameter. Holes shall made by authorised approved agency.
10
-
-
... More
Providing material and labour for wet drilling accurate and clean holes of specified diameter in RCC walls, slabs, beam or any other RCC member without vibration by core cutting (diamond drilling) holes from 152 to 202mm dia machine including scafolding, safety majors, disposing the debris, cleaning for all floors, all height etc compete as directed by engineer in charge. Measurement shall be taken for the depth of holes in running meter for specified diameter. Holes shall made by authorised approved agency.
10
-
-
... More
Providing material and labour for Cutting holes of required size in brick/ block masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge.
50
-
-
... More
Rebaring :
Providing material and labour for Drilling/ Cleaning hole and injecting grouting chemical with the help of dispenser, into a hole of dia 8mm and depth 120mm as per manufacturer/ structural consultant's specification and fixing rebar of the required diameter subsequently. Fixing methodology shall be followed as per manufacturer’s guidelines. Steel will be paid under relevant item. Manufacture to submit Rebar Depth Calculation based on design loads & other parameters as provided by consultant and in accordance with EOTA-TR-023/029 “guidelines for post installed rebar connections” for approval. Rate shall be inclusive of all material, labour, necessary scaffolding etc complete for all floors, all height as directed by engineer in charge.
50
-
-
... More
Rebaring :
Providing material and labour for Drilling/ Cleaning hole and injecting grouting chemical with the help of dispenser, into a hole of dia 10mm and depth 150mm as per manufacturer/ structural consultant's specification and fixing rebar of the required diameter subsequently. Fixing methodology shall be followed as per manufacturer’s guidelines. Steel will be paid under relevant item. Manufacture to submit Rebar Depth Calculation based on design loads & other parameters as provided by consultant and in accordance with EOTA-TR-023/029 “guidelines for post installed rebar connections” for approval. Rate shall be inclusive of all material, labour, necessary scaffolding etc complete for all floors, all height as directed by engineer in charge.
50
-
-
... More
Rebaring :
Providing material and labour for Drilling/ Cleaning hole and injecting grouting chemical with the help of dispenser, into a hole of dia 12mm and depth 180mm as per manufacturer/ structural consultant's specification and fixing rebar of the required diameter subsequently. Fixing methodology shall be followed as per manufacturer’s guidelines. Steel will be paid under relevant item. Manufacture to submit Rebar Depth Calculation based on design loads & other parameters as provided by consultant and in accordance with EOTA-TR-023/029 “guidelines for post installed rebar connections” for approval. Rate shall be inclusive of all material, labour, necessary scaffolding etc complete for all floors, all height as directed by engineer in charge.
50
-
-
... More
Rebaring :
Providing material and labour for Drilling/ Cleaning hole and injecting grouting chemical with the help of dispenser, into a hole of dia 16mm and depth 240mm as per manufacturer/ structural consultant's specification and fixing rebar of the required diameter subsequently. Fixing methodology shall be followed as per manufacturer’s guidelines. Steel will be paid under relevant item. Manufacture to submit Rebar Depth Calculation based on design loads & other parameters as provided by consultant and in accordance with EOTA-TR-023/029 “guidelines for post installed rebar connections” for approval. Rate shall be inclusive of all material, labour, necessary scaffolding etc complete for all floors, all height as directed by engineer in charge.
50
-
-
... More
Chemical Anchor:
Providing material and labour for fixing chemical anchor medium to heavy duty injection adhesive for Anchor fixing in Dry conditions and HILTI HIT-HY 200 + HIT-V rods of size 10mm x 120mm of HILTI or equivalent as per drawing or as instructed by EIC. The system should be made of two foils consisting of resin and Hardener foil pack. The system can be used for threaded rods HIT-V rods or equivalent rods. The installation and the setting instructions should be strictly followed as per the manufacturers recommendations. Rate shall be inclusive of injection adhesive and fastner rod of same make.
50
-
-
... More
Chemical Anchor:
Providing material and labour for fixing chemical anchor medium to heavy duty injection adhesive for Anchor fixing in Dry conditions and HILTI HIT-HY 200 + HIT-V rods of size 12mm x 150mm of HILTI or equivalent as per drawing or as instructed by EIC. The system should be made of two foils consisting of resin and Hardener foil pack. The system can be used for threaded rods HIT-V rods or equivalent rods. The installation and the setting instructions should be strictly followed as per the manufacturers recommendations. Rate shall be inclusive of injection adhesive and fastner rod of same make.
50
-
-
... More
Chemical Anchor:
Providing material and labour for fixing chemical anchor medium to heavy duty injection adhesive for Anchor fixing in Dry conditions and HILTI HIT-HY 200 + HIT-V rods of size 16mm x 200mm of HILTI or equivalent as per drawing or as instructed by EIC. The system should be made of two foils consisting of resin and Hardener foil pack. The system can be used for threaded rods HIT-V rods or equivalent rods. The installation and the setting instructions should be strictly followed as per the manufacturers recommendations. Rate shall be inclusive of injection adhesive and fastner rod of same make.
50
-
-
... More
Mechanical Anchor : Providing material and labour for drilling, cleaning hole and fixing mechanical anchor of size 10 X 120 of approved make and suitable for fastenings both on concrete & masonary/aerated blocks. Anchor comprises of 10 mm diameter Polyamide PA 6 grade sleeve and of 7 mm diameter double threaded 6.8 grade Hex head double threaded screw made of carbon steel galvanized to minimum 5 microns. Fixing methodology shall be followed as per manufacturer’s guidelines. for all floors, all height as directed by engineer in charge.
50
-
-
... More
Providing material and labour for fixing of expansion joint system for 100mm wide expansion joint gap of 3R/ Kantaflex/ Sanfield or equivalent related with floor location. The joints system will be of extruded aluminium base members, self aligning/ self centring arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor expansion control system with stone fixing arrangement for various vertical location in load application areas that accommodates multi directional seismic movement without stress to it’s components. System shall consist of metal profiles with a universal aluminium base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centring arrangement that freely rotates / moves in all directions. The Self – centring arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminium extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in- Charge. Expansion joint shall be tested for their watertight property & the same shall be watertight for a period of five years. Material shall confirm to ASTM 6063. Rate shall be for model with stone (flush with adjoining flooring) fixing arrangement. Stone shall be fixed in expansion joint system (in recess part) with suitable adhesive as per manufacturer' specification. Rate should be inclusive of necessary scaffolding work, non shrink grout, RCC cutting, edge preparation etc complete. Cost of stone shall be paid in relavant tender item.
5
-
-
... More
Providing material and labour for fixing of expansion joint system for 100mm wide expamsion joint gap of approved make related with floor location as per drawings and direction of Engineer-In-Charge. The joints system shall be of extruded aluminum base members, self aligning/ self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor/ floor to wall expansion control system for various vertical locations in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and match with finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates/ moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design. (Material shall conform to ASTM 6063). Rate shall be inclusive of stone fixing in between the system as per drawing. Cost of stone shall be paid in relevant tender item. Expansion joint system shall be as approved for all floor all level including scafolding etc complete as directed by engineer in charge.
10
-
-
... More
Providing material and labour for fixing of expansion joint system for 100mm wide gap of approved make related with internal wall and ceiling joint location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning/ centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner/ ceiling application, with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall conform to ASTM 6063). Rate shall be inclusive of polyester powder coating of approved shade and make. Expansion joint system shall be as approved for all floor all level including scafolding etc complete as dircted by Engineer in charge.
20
-
-
... More
Providing material and labour for fixing of expansion joint system for 100mm wide gap of approved make related with External wall joint location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning/ centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner, with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in- Charge. (Material shall conform to ASTM 6063). Rate shall be inclusive of polyester powder coating of approved shade and make. Expansion joint system shall be as approved for all floor all level including scafolding etc complete as dircted by Engineer in charge.
10
-
-
... More
Providing material and labour for fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut Powder coated aluminium sheet 2.5mm thick (minimumthickness of powder coating 50 micron) and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia, at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge.
50
-
-
... More
Sec.3.0 Centering & Form works
Providing material and labour for formwork for exposed concrete surfaces (Only extra addition cost on normal shutering) (vertical or horizontal surface) in smooth finish, desired pattern and size as per drawing and specifications, including rendering with white cement and grey cement, using laminated shuttering plywood, for vertical and steel or laminated plywood shuttering for horizontal surfaces for all types RCC elements like slabs, walls, columns, beams, folded staircase (all sides), sill, coping, lintels, jambs, beam hunching, vertical fins, pardi etc. including neat cleaning the exposed concrete surface, as directed by the engineer-in-charge. In case of round window opening in exposed RCC wall, for payment of expose shuttering opening cutout shall not be deducted (both side). Rate shall be applicable for all floors, all levels, all places and all shapes. The contractor shall submit shuttering pattern including tie-rod hole position based on architectural conceptual drawings. (Same kind of shuttering material should be only used for standard and residual sizes.) Tie-rod hole shall be filled with polymer mortar/ polymer concrete as per manufacturer's specification.
100
-
-
... More
Sec.4.0 Masonry works
Providing material and labour for laying Brick work using common burnt clay building Conventional bricks having crushing strength not less than 35 kg/SqCm in foundation and plinth in Cement Mortar 1:5 (1- Cement : 5 -fine sand) in any shape and thickness including finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.
2026
-
-
... More
Providing material and labour for laying Brick work using common burnt clay building Conventional bricks having crushing strength not less than 35 kg/SqCm in Cement Mortar 1:5 (1- Cement : 5 -fine sand) in superstructure above plinth level for all Floor in any shape and thickness including finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.
864
-
-
... More
Providing material and labour for laying Half brick masonry in common brunt clay building Conventional bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in superstructure for all Floor in any shape and thickness including finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.
255
-
-
... More
Providing material and labour for laying Masonary work using Aerated light weight concrete block having crushing strength not less than 35 kg/sqcm for super structure For all Floor in cement mortar 1:5 (1 cement : 5 fine sand) in any shape and thickness including finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.
20
-
-
... More
Providing material and labour for laying of hollow concrete fair finish block masonry for jali work madeout from M20 grade average 200mm thick hollow block of different size to cerate a pattern as per drawing confirming to IS 2185 Part I grade A (7.0), shape of hollow part shall be round, square or rectangle. Jali wall shall be constructed in Polymer (consumption as per manufacturer's specification) added cement mortar 1:2 (1 cement : 2 coarse sand) by providing 2 no of 6 mm dia. GI bar at each layer vertically as well as horizontally. GI wire/ rod shall be anchored in adjoining surface with quick fix chemical including roughening, cleaning, fixing and finishing/ rendering in grey and white cement sand mortar 1:1 in the line and level and in pattern, provision of groove as per drawing, curing at all heights with necessary scaffolding etc complete as per the drawing and direction of Engineer in charge. Contractor shall prepare mock up for one panel with approved block and as per satisfactiobn of Architect.
Note: Payment should as per actual area of jali made out of hollow block, no deduction of hollow gap of block should be considered for payment.
84
-
-
... More
Providing material and labour for fixing 190mm x 190 mm x 80 mm glass bricks of approved make and design with white CM 1:2 ( 1 white cement : 2 sand). Two numbers of 5 mm thick GI wires to be passed through PVC spacers in each joint horizontal as well as vertical by drilling holes in surrounding surface (brick or RCC) and filling the same with Hilti or equivalent chemical (rebarring). The PVC concealed spacer (with provision for passing the 2 no. GI wires in horizontal and vertical direction) shall be provided to maintain grooves/spaces for GI wire and white cement mortar at the junction of two glass bricks including curing. The sample of the glass brick shall be got approved by Architect. The glass bricks shall be fixed with placing GI wires vertically as well as horizontally after passing through the spacer and having minimum lap length of + 200 mm as per the site conditions at all the places, all heights, all level and in all shapes, etc. complete, as per drawing and as directed by Engineer-in-charge. Joints along the periphery of glass bricks shall be filled with approved make and color weather silicone sealant of DOW corning 789 or equivalent.
20
-
-
... More
SEC:5 Doors and Windows work
ALUMINIUM WORKS -
Providing material and labour for fixing in position frames, shutter for any type of aluminium work for any type of door, window, partition, made out of any type of aluminium sections of approved make having minimum 50 micron pure polyester powder coating of approved shade, texture & colour of approved make for all floors, all levels, all heights, all shapes, all sizes including cutting, bending, crimping, fabricating in best workmanship manner etc as per the drawing, specification and as directed by Architect or Engineer-in-Charge. Contractor shall prepare shop drawing based on concept drawing and get approved from the consultants before procurement of material. All loose material shall be approved. Mockup of one/two window shall be executed as per approved shop drawing with all hardware. Work shall carried out as per the approved shop drawings, approved mock-up and approved sample. Actual weight of installed Aluminium sections (for using fabrication without considering any wastage) shall only be measured and shall be considered for the payment. Contractor shall provide guarantee for stability, water tightness etc for 12 months after defects liability period. Rate shall be inclusive of providing aluminium sections, cutting, fabrication, errection and fixing to the best workmanship manner, including 1) Sheet metal screws and casted solid aluminum corner cleats fixed with external byttins with a spring for rapid and secure joint assembly for casement and sliding shutter and frame; 2) Glazing clips for receiving infill panel; 3) Best quality wool pile where ever shutter touches the frame and compatible microwave cured EPDM rubber; 4) Dash Anchor fasteners of HILTI HRDUGT or equivalent for fixing the frame assembly to the RCC or masonry surfaces. Minimum 1 anchor fastener shall be used for every 600 mm length of section for stability of frame. 5) 10mm GI tie rod for connecting vertical stile at top and bottom for aluminum door shutter and 4mm thick solid aluminium corner cleat of full thickness of section for connecting style and horizontal rails; 6) providing and fixing packing (rough ground) in full periphery/ at every 600mm c/c with average 6 mm thick PVC spacer/ compact sheet of width (equal to section width less 30mm for backer rod and sealant); 7) Filling the gap between wall and frame on both sides (outside and inside) with polyethylene baker rod of avg. 10 mm thickness of approved make and color and then sealing the remaining gap with neutral grade G/M (Glazed & Metal) weather silicon sealant of approved make and color. 8) Termite treated seasoned teak wood as infill material to installe hardware in door shutter and frame as and when required and excluding the cost of necessary hardware and Glazing or Infill material.
4284
-
-
... More
Fix Louvers and Fins (made out of Aluminium Section)
Providing, fixing, designing aluminium fixed louver of any type of louver section of approved make having minimum 50 micron polyster powder coating on all the surfaces of approved shade, texture & make as per manufacturer's specifications. Contractor shall submit the shop drawing for louver/ fins based on concept design/ drawing and as per elevation. Aluminium louver section shall be fixed on aluminium framing/ carrier/ panel/ GI clip and necessary sub structure with required fastners, hardware as per approved shop drawing etc complete for all floor, all height including scaffolding as directed by engineer in charge. Louver, framing and sub structure shall be in proper line, level and plumb. Necessary MS work shall be paid in relevant tender item.
72
-
-
... More
Providing material and labour for fixing aluminium operable system louvers of 50 micron Pure Polyester Powder Coating of approved shade & colour and texture manufactured by Techanal, Domal, Sai aluminium - Shashal or equivalent with operating mechanism frame louver with gasket and piles. The corner joints of the frame shall be made at 45 degree using die-cast solid aluminium corner cleats fixed with external byttins with a spring for rapid and secure joint assembly. Gaskets shall be of EPDM material. Work shall be carried out in the existing door / window frame as per sample approved by Architect for all floor all level all height etc as directed buy Engineer in charge. Operating panel should be provided as per drawing. Actual measurement of system with louvers shall be measured and paid in sqmt. Rate should be inclusive of aluminium sub frame for housing operating system.
5
-
-
... More
Providing material and labour for fixing 6mm thick Clear Toughen Glass as per approved sample of any size, any shape and specified thickness in frame and shutter work with necessary cutting of glass as per drawing & specifications including providing and fixing EPDM quality rubber/ silicon sealant/ structural sealant and 3M tape on the periphery of the glass as per the required thickness etc. complete at all floors/ all levels/ all heights as per the directions of Engineer in charge. Actual installed quantity shall be measured and paid.
178
-
-
... More
Providing material and labour for fixing 8mm thick Clear Toughen Glass as per approved sample of any size, any shape and specified thickness in frame and shutter work with necessary cutting of glass as per drawing & specifications including providing and fixing EPDM quality rubber/ silicon sealant/ structural sealant and 3M tape on the periphery of the glass as per the required thickness etc. complete at all floors/ all levels/ all heights as per the directions of Engineer in charge. Actual installed quantity shall be measured and paid.
44
-
-
... More
Providing material and labour for fixing 10mm thick Clear Toughen Glass as per approved sample of any size, any shape and specified thickness in frame and shutter work with necessary cutting of glass as per drawing & specifications including providing and fixing EPDM quality rubber/ silicon sealant/ structural sealant and 3M tape on the periphery of the glass as per the required thickness etc. complete at all floors/ all levels/ all heights as per the directions of Engineer in charge. Actual installed quantity shall be measured and paid.
20
-
-
... More
Providing material and labour for fixing 12mm thick Clear Toughen Glass as per approved sample of any size, any shape and specified thickness in frame and shutter work with necessary cutting of glass as per drawing & specifications including providing and fixing EPDM quality rubber/ silicon sealant/ structural sealant and 3M tape on the periphery of the glass as per the required thickness etc. complete at all floors/ all levels/ all heights as per the directions of Engineer in charge. Actual installed quantity shall be measured and paid.
21
-
-
... More
Providing material and labour for fixing 6 mm thick High performance glass (inslulated/ Low-E Glass) as per approved sample of any size, any shape and specified thickness in frame and shutter work with necessary cutting of glass as per drawing & specifications including providing and fixing EPDM quality rubber/ silicon sealant/ structural sealant and 3M tape on the periphery of the glass as per the required thickness etc. complete at all floors/ all levels/ all heights as per the directions of Engineer in charge. Actual installed quantity shall be measured and paid.
50
-
-
... More
Providing material and labour for process charges of Frosting the glass (any thickness of glass) as per drawing and as directed by engineer in charge. Rate shall be for only for extra cost of Forsting on Glass for all floor, all height all level.
72
-
-
... More
Providing material and labour for fixing 6mm thick Wired Glass of any size, any shape in frame and shutter work with necessary cutting of glass as per drawing & specifications including providing and fixing with EPDM quality rubber/ silicon sealant/ structural sealant on the periphery of the glass as per the required thickness etc. complete at all floors/ all levels/ all heights as per the directions of Architect. Actual installed quantity shall be measured and paid. Rate shall be inclusive of all type of wastage.
84
-
-
... More
Providing material and labour for fixing 6mm thick Compact Sheet of any size, any shape, any color (single side, double side coloured), any texture of approved make and as per approved sample (approved by architect). Compact sheet shall be fixed in aluminium frame and shutter work with necessary cutting of sheet, provision of groove, filling of groove (both side) as per drawing & specifications including providing and fixing EPDM quality rubber/ silicon sealant/ adhesive tape/ screwing on the periphery of the sheet as per the required thickness etc. complete at all floors/ all levels/ all heights as per the drawing & directed by Engineer in charge. Cut edges of the compact sheet shall be provided with masking tape. Actual installed quantity shall be measured and paid.
84
-
-
... More
Providing material and labour for fixing in position SS 304 - 18 x 16 mesh and 32gauge Mosquito net of any size any shape having 50 micron pure polyster powder coating of approved make and shade for aluminium sliding shutter/ fixed shutter or in front of aluminium louvers as per approved shop drawing prepared by contractor. Jali shall be fixed with SS304 grade screws and fasteners required to tighten the Jali/ Net including fxing channel, EPDM quality rubber/ silicon sealant etc complete for all floors, all levels, all heights as directed by engineer in charge. Only installed area of mosquito net shall be measured and paid in Sqm without considering any westage. All aluminium sections shall be paid under relevant tender item.
76
-
-
... More
Providing material and labour for fixing factory made and pressed laminated 35mm thick flush door shutter of specificied thickness made of ISI marked non decorative type flush door shutters confirming to IS- 2202 (Part 1), core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers (IS 710 Grade) on both faces of shutters having 1 mm thick decorative type laminates of approved make, shade, finish on both faces of shutter fixed with phenol formaldehyde synthetic resin type adhesive conforming to IS 848 including providing and fixing external lipping with 2nd class teak wood battens, exposed (37mm x 12mm)/ concealed (35mm x 12mm) on all edges of door shutter as required with 2 coats of synthetic enamel painting including 1 coat of wood primer & lapi/ lacquer polishing with primer to all exposed side of lipping, all as per approved drawing, for all floor, all level all height etc. complete as directed by Engineer-in-charge. Measurement including lipping shall be considered for payment. Necessary hardware like hinges, pivot, handle, tower bolts, locks etc shall be separately measured and paid in the relevant tender items. Cost of laminates shall be paid in relevant tender item.
14
-
-
... More
Providing material and labour for fixing factory made and pressed laminated 30mm thick flush door shutter of specificied thickness made of ISI marked non decorative type flush door shutters confirming to IS- 2202 (Part 1), core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers (IS 710 Grade) on both faces of shutters having 1 mm thick decorative type laminates of approved make, shade, finish on both faces of shutter fixed with phenol formaldehyde synthetic resin type adhesive conforming to IS 848 including providing and fixing external lipping with 2nd class teak wood battens, exposed (37mm x 12mm)/ concealed (35mm x 12mm) on all edges of door shutter as required with 2 coats of synthetic enamel painting including 1 coat of wood primer & lapi/ lacquer polishing with primer to all exposed side of lipping, all as per approved drawing, for all floor, all level all height etc. complete as directed by Engineer-in-charge. Measurement including lipping shall be considered for payment. Necessary hardware like hinges, pivot, handle, tower bolts, locks etc shall be separately measured and paid in the relevant tender items. Cost of laminates shall be paid in relevant tender item.
5
-
-
... More
Providing material and labour for fixing 1 mm thick Laminate sheet of any size, any shape, any color, any texture of approved make and as per approved sample (approved by architect) on Non decorative flush door, panelling work, fixed partition, any ply surface etc with necessary nails, screws, adhesives as per drawings and as per approved sample. The rate shall be for all heights, all floors, all places etc complete as directed by engineer in charge. Actual laid area shall be measured and paid without considering any westage. Laminates and ply shall be factory pressed.
35
-
-
... More
Providing material and labour for fixing vision panel made out of 5mm thick clear toughen glass of any shape any size in all type/ thickness of flush doors shutter. Glass shall be fixed with teak wood lipping (Lacquer polished of approved make and shade) on both side the door of required size as shown in drawing and direction of Engineer-In-Charge. Rate shall be includes the cost of cutting door, provision of glass with both side polished lipping, making good etc complete. The actual installed area of vision panel shall be measured for payment.
10
-
-
... More
Providing material and labour for fixing 6mm thick frame less mirror of approve make in any shape and sizes as per drawing. Mirror shall be fixed on 6mm thick cement bonded particle board (Bison panel) backing. Cement bonded particle board shall be fixed to wall with approved SS 304 fastener. All edges of glass shall be grinded (as required), cute corner and polished. Glass shall be fixed with silicon sealant/ 3M tape etc complete at all floors/ all levels/ all heights as directed by engineer in charge. Installed area of mirror shall be considered for payment without wastage.
18
-
-
... More
Providing material and labour for Extra charges for machined Perforation of required dia and pattern in flush door shutter/ compact sheet of any thickness for air circulation for all floor, all height all level as per drawing and as directed by Engineer in charge. Edges of perforation shall be finished and sharpen.
8
-
-
... More
Curtain wall system for circular ramp area with single glass unit Designing, fabricating, testing, protection, installing and fixing in position curtain wall system (in circular shape) designed to with stand the wind pressure of site location confirming to IS -875 part III. (The system must pass the proof test at 1.5 times design wind pressure without any failure). The profile system is based on capped curtain wall design and glass is held all around by mechanical pressure plate and cap with microwave cured EPDM gaskets in all four sides of glazing, with necessary brackets of aluminium alloy of 6065 with three dimensional adjustment with serrations and serrated washers to arrest the wind load movement, SS 316 grade anchor bolts, screws and fasteners with non staining weather sealant and 1.5mm thk flashing sealed all around parameter inside and outside to seal the gaps between curtain wall and the building structure all complete required to perform as per specification and drawing in conjunction with BOQ. The system shall be designed for 3 barrier gasket system based on pressure equalization principle with drainage provision at all panel bottom & thermal break gasket barrier between pressure plate and aluminium grid work for improved thermal performance and weather performance, spandrel panel shall have pressure release & condensation drainage provisions, The system shall be able to accommodate building movements, thermal expansions resulting from surface temperatures of up to 80deg cel, temperature differential of 25 deg cel thermal expansions and the seismic movements without creating excessive stress. The system shall be designed to accommodate minimum 10mm vertical movement between floors. All metal joints in the wet area shall be with small joint sealant applied to ensure water tightness, so curtain wall system becomes water tight. The extruded aluminium sections of Alloy 6063 T5/ T6 and tolerances confirming to DIN standard from approved extruder. The structural profiles shall have minimum 2.5mm wall thickness. All the visible surfaces shall have Super Durable polyester Powder coating finish as per manufacturer's specifications. The non visible aluminium surfaces shall have minimum chromatizing treatment. Glass shall be Single Glass, Heat strengthen and of required thickness as per thickness analysis report of approved manufacturer. After installation of total system, glass will not appear with waviness or sagging. The quote rate shall include all design, engineering & shop drawing prepared by contractor and approval from consultant. The quote rate shall include all Taxes, duties, statutory obligations and safety code compliance as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer in Charge. MS work shall be paid in relevant tender item.
20
-
-
... More
Notes for Hardware : Supplying and fixing heavy quality fixtures and fittings for doors, windows, ventilators, partition wall, cabinets with necessary screws, nails, machine pins etc at all floor/ all levels/ all heights complete. Sample shall be approved by Architect before execution. As per description, SS hardware shall be of 304 grade or 316 grade as per item description and as per approved sample. The fixture & fastenings shall be provided as under :
Providing material and labour for fixing single/ double action hydraulic floor spring with SS cover plate & adjustable concealed casted top pivot (two piece) and bottom strap of approved make for wooden/ aluminium doors of specified capacity with minimum one year guarantee. Rate shall be inclusive of cutting of floor neatly, grouting the floor spring & cleaning/ polishing the floor & maintaining in good working condition until defect liability period. In case of Aluminium shutter bottom arm of floor spring & top pivot shall be firmly fixed in the aluminium members using required size of teak wood by making rabbet in the wood. The Floor Spring shall conform to EN 1154. a) Hold open having for shutter width upto 1200mm with standard spindle and cover plate. Closing force complying with EN 1154 2-4
9
-
-
... More
Providing material and labour for fixing hydraulic rack and pinion door closer with standard arm (Silver finish) with screws to pivoted/ hinged door of approved make for specified door width with minimum one year guarantee. All adjustment screws face fixed. Rate shall be inclusive of fixing with using the template as per manufacturer’s specification & maintain in good working condition until defect liability period. The door closer shall conform to EN 1154 standard.
a) with standard/ hold open arm with two independent closing valves and latching speed adjustable by arm without mounting back plate, Closing force complying with EN 1154 2 - 4 for up to 900 mm door shutter width
63
-
-
... More
Providing material and labour for fixing SS 316 grade butt hinge of average 100 x 75 x 3 mm - with ball bearing of approved make as per approved sample with necessary screws etc. complete for all floor all height all level as directed by Engineer in Charge.
176
-
-
... More
Providing material and labour for fixing SS 316 grade butt hinge of average 100 x 64 x 2.5 mm - without ball bearing of approved make as per approved sample with necessary screws etc. complete for all floor all height all level as directed by Engineer in Charge.
56
-
-
... More
Providing material and labour for fixing set of dead lock of approved make with 50mm backseat, 20mm square for end with 72 mm centers including strike plate in satin stainless steel finish as per DIN 18251-1, grade 2 and prepared for euro profile cylinder (EPC) including strike plate and EPC length 60/70 mm standard Euro profile Pin Cylinder/ Half pin cylinder with both side key/ one side key one side knob operation with one pair of SS 316 grade Escutcheons (key hole plate) for wooden/ aluminium/ metal doors with necessary SS Phillips head screws etc complete for all floor, all level, all height as per approved sample and as directed by engineer in charge. The lock shall be with 3 keys.
39
-
-
... More
Providing material and labour for fixing SS 304 satin finished set of narrow style dead lock of approved make with 25mm /35 mm set back necessary euro profile pin cylindrical lock 60/ 70 mm for Key and or knob operation and one pair of SS 316 grade Escutcheons (key hole plate) for aluminium door with necessary SS Phillips head screws etc complete for all floor, all level, all height as per approved sample and as directed by engineer in charge. The lock shall be with 3 keys.
21
-
-
... More
Providing material and labour for fixing Mortise lock of approved make having 72mm centre to centre, 55mm Backset 20mm Square forend and 60/ 70mm standard Europrofile Pin Cylinder with both side key /one side key - one side knob operation and SS 316 grade hollow tubular pipe pair of Mortise handle of 22mm dia 150mm long with a pair of SS 304 Escutcheons (key hole plate) for wooden /aluminium/ metal doors with necessary ss phillips head screws etc complete for all floor, all height, all level as per approved sample as directed by engineern in charge. The lock shall be with 3 keys.
5
-
-
... More
Providing material and labour for fixing Zinc material indicator bolt of approved make for toilet door with Thumb Turn inside & Emergency Release & Indicator Outside with necessary screws etc complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.
8
-
-
... More
Providing material and labour for fixing SS 316 grade push-pull pair of handle of size 200 mm long x 19mm dia made out of satin (brush) finish hollow pipe of 1.5mm thick having offset type (C or D shape)/ H-shape/ D-shape of approved make with necessary screws etc. complete for wooden doors/ aluminium doors/ metal doors for all heights, all floors and all level as per approved sample and as directed by Engineer-in-charge. Rate shall be The length of handle should be perfect center to center as below specified.
43
-
-
... More
Providing material and labour for fixing SS 316 grade push-pull pair of handle of size 300 mm long x 22 mm dia made out of satin (brush) finish hollow pipe of 1.5mm thick having offset type (C or D shape)/ H-shape/ D-shape of approved make with necessary screws etc. complete for wooden doors/ aluminium doors/ metal doors for all heights, all floors and all level as per approved sample and as directed by Engineer-in-charge. Rate shall be The length of handle should be perfect center to center as below specified.
32
-
-
... More
Providing material and labour for fixing SS 316 grade push-pull pair of handle of size 600 mm long x 32 mm dia made out of satin (brush) finish hollow pipe of 1.5mm thick having offset type (C or D shape)/ H-shape/ D-shape of approved make with necessary screws etc. complete for wooden doors/ aluminium doors/ metal doors for all heights, all floors and all level as per approved sample and as directed by Engineer-in-charge. Rate shall be The length of handle should be perfect center to center as below specified.
12
-
-
... More
Providing material and labour for fixing SS 316 grade push-pull pair of handle of size 1200 mm long (out to out) x 38 mm dia made out of satin (brush) finish hollow pipe of 1.5mm thick having offset type (C or D shape)/ H-shape/ D-shape of approved make with necessary screws etc. complete for wooden doors/ aluminium doors/ metal doors for all heights, all floors and all level as per approved sample and as directed by Engineer-in-charge. Rate shall be The length of handle should be perfect center to center as below specified.
5
-
-
... More
Providing material and labour for fixing SS 316 grade handles 150mm long D shape hollow tube handle of approved make with both end bracket with necessary screws etc. complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.
12
-
-
... More
Providing material and labour for fixing 25mm diameter (1.5mm thick) SS 316 satin (brush) finish Disabled Grab Rails/ handle of 600mm long of approved make with necessary SS 304 grade screws etc. complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.
4
-
-
... More
Providing material and labour for fixing of SS 304 grade brush finish 450mm height Tower bolt (barrel type with minimum rod size shall be 10mm) of approved make in wooden doors/ aluminium doors/ metal doors with necessary screws etc. complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.
61
-
-
... More
Providing material and labour for fixing of SS 304 grade brush finish 250mm height Tower bolt (barrel type with minimum rod size shall be 10mm) of approved make in wooden doors/ aluminium doors/ metal doors with necessary screws etc. complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.
10
-
-
... More
Providing material and labour for fixing of SS 304 grade satin finish lever action Flush tower bolt with 19mm projecting bolt (extended rod of 600mm length) aluminum casted of approved make for double shutters aluminum door, with necessary screws etc. complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.
25
-
-
... More
Providing and Fixing SS 304 Grade Satin Finish 1.8 mm Thickness Aldrops of 16 mm dia x 250 mm including 3 nos. fixing Bracket and 1 no. locking bracket of approved make with necessary MS nickle Plating Bolts etc. complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.
3
-
-
... More
Providing and Fixing SS 304 Grade Satin Finish 1.8 mm Thickness Tadi of 12mm dia x 200mm including 3 nos.fixing Bracket of approved make with necessary screws, pins, bolts etc. complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.
9
-
-
... More
Providing material and labour for Fixing Zinc material satin finish 85 to 100mm long Baby Latch with necessary SS Screws etc. complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.
11
-
-
... More
Providing material and labour for fixing SS 304 brush finish solid Door Stopper with magnet, fixed type, wall mounted (square/ round) of approved make with necessary screws etc. complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.
46
-
-
... More
Providing material and labour for fixing SS 304 grade brush finish solid Door bufer with pvc base, wall mounted (square/ round) of approved make with necessary screws etc. complete as approved by Engineer-in-charge in Charge.
17
-
-
... More
Providing and fixing bubble seal gasket of reddiplex, lorient or equivalent for door of any material made out of 5mm thick silicon having self adhesive fixing arrangement of approved shade and colour etc complete as per approved sample and as directed by engineer In charge.
69
-
-
... More
Providing and fixing concelled type Auto drop down seal of PR Arch Solutions or CCE (Itly) or approved for door shutter of size 28mm x 13mm made out of aluminium with silicon and fixed at bottom of shutter as per approved sample and as directed by engineer in charge.
50
-
-
... More
Providing material and labour for fixing Aluminium powder coated butt hinges of required capacity of approved make for casement window/ door (europrofile) with necessary accessories, screws etc. complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.
12
-
-
... More
Providing material and labour for fixing SS 304 adjustable friction windows stays of size 355 X 19 mm of approved make with necessary stainless steel screws to the side hung or top hung windows etc. complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.
8
-
-
... More
Providing and fixing powder coated single point lock with mortise handle (without lock) of approved make with heavy gear mechanism of required capacity including all required accessories like handle, fork, connector, extensior, polyamide, locking point, corner transmission and striker etc as per approved manufacturer recomendatation for aluminium casement door and window (top hung or side hung) with necessary screws etc complete as directed by engineer in charge.
4
-
-
... More
Providing material and labour for fixing powder coated two point lock with mortise handle (without lock) of approved make with heavy gear mechanism of required capacity including all required accessories like handle, fork, connector, extensior, polyamide, locking point, corner transmission and striker etc as per approved manufacturer recomendatation for aluminium casement door and window (top hung or side hung) with necessary screws etc. complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.
4
-
-
... More
Providing material and labour for fixing powder coated inbuilt flush handle (without lock) of approved make of required capacity including all required accessories like nib, counter plate etc as per approved manufacturer recomendatation for aluminium sliding window with necessary screws etc. complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.
138
-
-
... More
Providing material and labour for fixing adjustable/ fixed Teflon roller bearing set with reinforced nylon casing of approved make (twin or single wheel according to weight and size) for sliding window/door as per drawing etc. complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.
324
-
-
... More
Providing and fixing of Non Fire rated Hollow metal door of approved make and shade at all levels from ISO 9001-2000 certified Manufacturer. All hollow metal general doors with or without vision panel. Pressed Galvanized steel Single /Double leaf to required sizes of approved make which consists of frame, shutter, infill and finish as detailed below and conforming to IS 277. Door frame shall be Double rebate profile of size 143 x 57 mm made out of 1.20mm thick galvanized steel sheet (18 gauge). Frames should be Mitered and field assembled with self tabs. Frames should be fixed with back plate bracket and anchor fasteners of approved size and make for installation on a finished plastered masonry wall opening. Once frame installed should be grouted with cement slurry if recommended on the clear masonary opening.
Door leaf should be 46mm thick fully flush double skin door with or without vision lite. Door leaf shall be manufactured from 0.8mm (22 gauge) minimum thick galvanized steel sheet. The internal construction of the door should be rigid with steel stiffeners/ pads and reinforcement. The infill material shall be resin bonded honeycomb core. All doors should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be as per joinery details with a screw on glass beading on the inside. The glass should be 5mm clear toughened glass. Shutter shall be fixed to frame with SS 304 Ball Bearing Butt Hinges of size 100mm x 75mm x 3 mm (no of hinge as suggested by engineer in charge).
All door shutter and frames shall be finished with etched primer coating, stove zinc phosphate primer and thermosetting polyurethane aliphatic grade paint of approved colour. The door leaf and frame shall have passed minimum 250 hours of salt spray test. Rate shall be include supply and installation of door i.e frame, anchor fastener, shutter with vision lite, hinge but exclude the cost of hardware (other than hinge) etc complete as directed by engineer in charge. Out to out area of door with frame shall be measured for payment.
117
-
-
... More
Providing material and labour for fixing of double shutter lead line door of average sizes 1500mm(W) x 2400mm(H) of make Pacific or equivalent make, with a 2mm Lead sheet, provision of lead glass as vision panel, with all Heavy duty hardware of make Geze, Dorma or equivalent make with following specification.
Door Frame - The frame is size 143 x57 of 1.6mm thick GI sheet having polyester powder coating of 50 to 60 micron thickness. Frame shall be with 2mm thick lead sheet with and reinforced to support the load of the lead sheet. Frame shall be fixed with SS 304 grade anchor fastener (Min 3 No per side) of approved make and size.
Door shutter - Door Shutter in 46 mm +2mm thick manufactured from 1.0mm GI sheets on both faces press formed, lock seam jointed at stile edges to form a double skin fully flush shell. Infilled rock wool insulation material to be provided for structural rigidity & additional reinforcements & sound Insulation with Honeycomb core infill for structurally flat surface & construction with 2 mm thick lead lining. The lead lining is located in the core of the door with other infill material. The internal construction of the door should be appropriate for all hardware fixtures and vision glass.
Vision Panel - 10 mm thick Lead Line Glass.
Hardware : Hinge: SS 304/316 grade heavy duty ball bearing hinge - 4 No/ shutter, 2 No Door Closer, Dead lock, push-pull pair of handle of size 300 mm long x 22 mm dia, 1.0 mm thick Kick plate, Flush bolt, Rate shall be inclusive of frame, shutter, vision glass (lead line glass), fastener, all hardware with installation for all floor all height etc complete as directed by engineer in charge. Out to out dimension of door with frame shall be measured for payment.
4
-
-
... More
Sec.7.0 Plastering & Pointing works
Providing material and labour for laying 10mm thick mala cement plaster in single coat on ceiling & stairs and soffits plastering and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand) for all floor, all level, all height (including all basement) with necessary scaffolding, curing, finishing, making grooves, forming pattas, hacking properly to RCC surface etc. complete as directed by the Engineer-in-charge.
11807
-
-
... More
Providing material and labour for laying 15mm thick cement plaster in single coat on sides of brick work/ blocks wall/ RCC work for interior plastering and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand) for for all floor, all level, all height (including all basement) with necessary scaffolding, curing, finishing, making grooves, forming pattas, hacking properly to RCC surface etc. complete as directed by the Engineer-in-charge.
990
-
-
... More
Providing material and labour for laying 20 mm thick internal/ external double coat mala cement plaster on interior brick / concrete work for plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished for all floor, all level, all height (including all basement) with necessary scaffolding, curing, finishing, making grooves, forming pattas, hacking properly to RCC surface etc. complete as directed by the Engineer-in-charge.
18480
-
-
... More
Providing material and labour for laying 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) with necessary scaffolding, curing, finishing, making grooves, forming pattas, hacking properly to RCC surface etc. complete as directed by the Engineer-in-charge.
3867
-
-
... More
Providing material and labour for fixing G.I. hexagonal chickenmesh of size 20mm x 20mm of 22 gauge at junction of concrete and brick work or between different materials after making "V" grove between two different material surface and filled with rich cement mortar and @ 100mm on each side of surfaces including necessary "U" nails/ screws/ washers with cleats for fixing, overlaps, curing, scaffolding etc complete for all floors/ all levels/ all heights/ all shapes as per direction of Engineer-in-charge.
640
-
-
... More
Sec.8.0 Waterproofing works
Providing material and labour for laying average 18mm thick double coat (water proof) smooth/ wired finish cement plaster on sides of masonry work/ block wall/ RCC wall, 12 mm thk first coat in CM 1:3 (1 cement : 3 coarse sand) by spraying , second coat of 6 mm of CM 1:3 (1 cement : 3 fine sand) and mixing Integral waterproofing liquid admixture for mortar in recommended proportions in both coats, finishing the surface wired finish/ smooth finish with a floating coat of neat cement slurry at 2.75 Kg/ sqm to receive the tiles for all floors, all shapes and all height including hacking to RCC surface, scaffolding, curing etc. complete for all floor, all height as directed by engineer-in-charge. Cement slurry admixed with Integral waterproofing liquid admixture for mortar in recommended proportions is to be applied before each coat and final finishing coat.
2791
-
-
... More
Providing material and labour for laying average 50 mm thick IPS, water proof cement concrete flooring in 1:2:4 (1 Cement : 2 Sand : 4 Graded Aggregate 10mm Nominal size) to RCC under ground tanks at all heights in line, level and gradient including mixing water proofing compound in recommended proportions suggested by manufacturer as approved by Engineer-in-charge and leaving the surface rough wired finish to receive any type of flooring / smooth finish etc complete for all floor all height as directed by engineer in charge.
1825
-
-
... More
Providing material and labour for laying integral cement based water proofing treatment (India type brick bat) including preparation of surface as required for treatment of roofs, balconies, terraces etc with average thickness of 120 mm and minimum thickness at khurra as 65 mm and consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in- charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with wired finish to receive china mosaic flooring.
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge for all height all level.
2364
-
-
... More
Toilet waterproofing
Providing material and labour for carrying out waterproofing treatment to sound concrete surface of toilets, sunken slabs, corridors, wet areas etc. after proper surface preparation to remove loose dust, dirt etc., repairing of cracks (if any) using polymer modified mortar, carry out cementitious injection grouting at leakage points modified with Plasticized Expandive Grout Admixture @ 225 gms per bag of cement, carry out 50 mm thick cement mortar (1:3) vatta/ corner modified with Styrene Butadine Polymer bonding agentat dosage of 2.5 Ltr per 50kg cement, Pre-dampening concrete surface, mixing and application of two coats of Elastomeric Polymer modified cementitious waterproofing coating by incorporating alkali resistance 45 gsm glass fibremesh between 1st and 2nd coat using suitable brush or roller as per coverage etc. complete for all floor al height all level as per manufacturer’s specification and as directed by engineer in charge.
Cured Polymer modified cementitious waterproofing coating shall comply with ASTM D4060, ASTM D4541, ASTM D638,ASTM C836 and possess below properties: Mixed density : 1.68 g/cc, Adhesion to concrete- 1 N/mm2, Non-toxic, Static crack accommodation-1 mm
Water proofing system shall be executed by only approved applicator of approved brand and under strictly supervision of technical fellow of manufacturer. The rate includes giving 10 year guarantee for waterproofing on a Rs.100/- stamp paper in approved proforma.
101
-
-
... More
Hole Packing treatment on service line Providing material and labour for applying total packing treatment on any type of pipes comes into water proofing area for all floor, all height as directed by engineer in charge as follows :
Preparing the inside surface of core and Pipe by roughening using suitable Sand paper to get better adhesion prior to packing works. Cleaning the surface by wire brushing followed water jet to remove any laitance or loose flaky particles. Applying a coat of styrene- butadiene based polymer coating using Styrene Butadine Polymer bonding agentto enhance adhesion between the packing material and other surfaces. Packing the gap using non shrink cement polymer based grout using Non-shrink cementitious grout upto the surface of the bore whilst the bonding agent is in tacky state before application of water proofing treatment. Treatment shall be executed by same agency with same manufacturer's product. Warranty includes in water proofing item.
66
-
-
... More
Providing material and labour for applying hydrophilic crystalline based waterproofing for concrete walls, raft (basement and under ground water tank) with system In two coat application. The application to be done from + ve (positive) side on a wet open pore green concrete surface at coverage of 0.8 to 1 Kg/Smt as per manufacturer specification. It should be hydrophilic in nature, should be able to grow crystals year after year to seal microcracks.The product should confirm to DIN 1048 part 5 and should provide in depth crystallization. The product technology should be CPWD and EIL approved. Application should be done on wet surface after 3-6 hours of casting of concrete. The material and application warranty to be given by manufacturer’s authorized distributor/ applicator on prescribed format. Rate shall be inclusive of construction joint treatment, crack repair, patch repair, grouting, including cost of scafolding for all height all level as directed by engineer in charge.
3449
-
-
... More
Providing material and labour for applying of Swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure, such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge for all floor, all height all level. The product performance shall carry guaranteed for 10 years against any leakage.
405
-
-
... More
Sec.9.0 Flooring works
Providing material and labour for laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) and fixed with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including finishing of joints, curing etc complete for all floors any heights, any lead and lift as directed by Engineer In charge. Sample and mockup shall be approvd before procurement of material.
840
-
-
... More
Providing material and labour for laying Ceramic tiles 6mm thick in skrting, risers of steps and dedo laid on plastered wall with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including finishing of joints, curing etc complete for all floors any heights, any lead and lift as directed by Engineer In charge. Sample and mockup shall be approved before procurement of material.
407
-
-
... More
Providing material and labour for laying average 25mm thick machine cut semi mirror polished Green Kota stone slab of size upto 600mm in flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including curing, rubbing and polishing at all floors any heights, any lead and lift in any shape and pattern etc complete as directed by Engineer In charge. Sample shall be approved before execution. Kota stone shall be in uniform shade of reuired size. Sample and mockup shall be approved before procurement of material.
2288
-
-
... More
Providing material and labour for laying average 25mm thick machine cut polished Green Kota stone slab of size upto 900mm in flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including curing, rubbing and polishing at all floors any heights, any lead and lift in any shape and pattern etc complete as directed by Engineer In charge. Sample shall be approved before execution. Kota stone shall be in uniform shade of reuired size. Sample and mockup shall be approved procurement of material.
139
-
-
... More
Providing material and labour for laying 8 to 10 mm thick Kota stone slabs in upto 100mm high skirting, (flush with plaster) laid on average 10 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including providing 10mm wide grove between skirting and plaster, rubbing and polishing complete as directed by Engineer In charge. Sample shall be approved before execution. Kota stone shall be in uniform shade of reuired size. Sample and mockup shall be approvd procurement of material. Shade of skirting must be match with flooring stone.
629
-
-
... More
Providing material and labour for laying average 25 mm thick machine cut polished Green kota stone slab of size upto 1.5mt length with uniform thickness for parapeet wall coping, tread, window jambs & sills, over 20 mm (average) thick base of cement mortar 1:6 (1 cement : 6 coarse sand) laid over and jointed with gray cement slurry including champhering of exposed edges, polishing, rubbing, curing, finishing, buffing after final polishing, maintaining upto handling ovre the project etc complete as directed by engineer in charge. All Expose edges of stone shall be pencil sharped and in even thickness and polished at all floors any heights, any lead and lift etc complete. as directed by Engineer Incharge. Sample shall be approved before execution. Sample and mockup shall be approvd procurement of material.
204
-
-
... More
Providing material and labour for laying average 25 mm thick machine cut polished Green kota stone slab of size upto 2.1mt length with uniform thickness for tread, window jambs & sills, coping over 20 mm (average) thick base of cement mortar 1:6 (1 cement : 6 coarse sand) laid over and jointed with gray cement slurry including pencil sharped exposed edges, polishing, rubbing, curing, finishing, buffing after final polishing, maintaining upto handling ovre the project etc complete as directed by engineer in charge. All Expose edges of stone shall be pencil sharped and in even thickness and polished at all floors any heights, any lead and lift etc complete. as directed by Engineer Incharge. Sample and mockup shall be approvd before procurement of material.
55
-
-
... More
Providing material and labour for laying average 25 mm thick machine cut polished Green kota stone slab of size upto 2.1mt length for riser of stair over 12 mm (average) thick base of cement mortar 1:6 (1 cement : 6 coarse sand) laid over and jointed with gray cement slurry including champhering of exposed edges, polishing, rubbing, curing, finishing, buffing after final polishing, maintaining upto handling ovre the project etc complete as directed by engineer in charge. The rate shall be inclusive of making rebates of 10x10mm for forming the grooves between treads and risers with polishing inside the groove. Sample shall be approved before execution. Sample and mockup shall be approvd procurement of material.
18
-
-
... More
Providing material and labour for laying machined cut average 25mm thick River wash finish Green Kotah stone of size upto 600mm of approved quality, selected and sorted for uniform color & texture, in floor, otta, tread, riser, ramp etc. of specified size as per design normal pattern (straight or staggered joint with square or rectangular shaped stone) and drawings. Kota stone is to be laid over cement mortar 1:6 bedding of average 20 mm thickness with keeping groove (upto 10mm wide), filling the groove with cement mortar in 1:2 (1 cement : 2 sand) with matching pigment, in 5mm less thickness of kota stone, and finishing including curing and cleaning with wire brush to remove excess cement on the sides of stone, chemphering of exposed edges having polishing up to the satisfaction of the Architect & engineer in charge etc. complete for all places/ all levels/ all heights. Sample and mockup shall be approvd procurement of material.
352
-
-
... More
Providing material and labour for laying machined cut average 25mm thick River wash finish Green Kotah stone of size 1500mm of approved quality, selected and sorted for uniform color & texture, in floor, otta, tread, riser, ramp etc. of specified size as per design normal pattern (straight or staggered joint with square or rectangular shaped stone) and drawings. Kota stone is to be laid over cement mortar 1:6 bedding of average 20 mm thickness with keeping groove (upto 10mm wide), filling the groove with cement mortar in 1:2 (1 cement : 2 sand) with matching pigment, in 5mm less thickness of kota stone, and finishing including curing and cleaning with wire brush to remove excess cement on the sides of stone, pencil sharped exposed edges having polishing up to the satisfaction of the Architect & engineer in charge etc. complete for all places/ all levels/ all heights. Sample and mockup shall be approvd procurement of material.
60
-
-
... More
Providing material and labour for laying cement concrete pavement (of any thickness) with 1:2:4 (1-cement : 2-coarse sand : 4-stone aggregate 20mm nominal size) including curing, finishing with floating coat of neat cement complete at all floors any heights, any lead and lift etc complete. as directed by Engineer Incharge.
29
-
-
... More
Providing material and labour for laying 8 to 10mm thick full body vitrified tile of size upto 600mm of any shade, any finish (glossy, matt, satin or anti skid finsh) of approved make in flooring and Skirting laid over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) and fixed with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including provision of groove, grouting of joints, finishing of joints, curing etc complete for all floors any heights, any lead and lift as directed by Engineer In charge. Grouting shall be paid in relevant tender item. Sample and mockup shall be approvd procurement of material. Actual laid area of tile shall be measured and paid.
463
-
-
... More
Providing material and labour for laying 8 to 10mm thick, double charged Vitrified tiles of size upto 600mm (of any shade glossy, matt or satin finsh) of approved make, shade and finish as approved by Architect/ EIC for all floors/ any height/ any levels etc in wall tile, dado, risers of steps, jambs as per drawings. Wall tile is to be fixed over 10 to 12 mm thick smooth finish plaster in cement mortar 1:3 (1 cement : 3 coarse sand) and fixed with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including provision of groove, grouting of joints, finishing of joints, curing etc complete for all floors any heights, any lead and lift as directed by Engineer In charge. Grouting and backing coat plaster shall be paid in relevant tender item. Sample and mockup shall be approvd procurement of material.
990
-
-
... More
Extra for providing material and labour for Grouting the joints of any type of flooring tiles of Size upto 600mm having joints of 3mm width and in full depth, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade and approved make (0.10 kg of hardener and 0.20 kg of resin per kg), including filling/ grouting and finishing complete as per direction of Engineer-in-charge.
1453
-
-
... More
Providing material and labour for laying approved quality average 18mm thick mirror polished Granite stone of approved shade in floor, otta in any pattern etc size upto 600mm including average 20 mm thick cement mortar bedding in 1:6 laid and jointed with white cement and matching pigment including rubbing, re-polishing after fixing to remove any undulation between the joints (if required) with different grades of Emery, refilling of open joints, curing, daily cleaning and mopping, as per satisfaction of Architect and as directed by Engineer in charge at all floors/ all levels/ all heights and all shapes. (Only finished work will be measured.) Sample and mockup shall be approvd procurement of material.
131.55
-
-
... More
Providing material and labour for laying approved quality average 18mm thick mirror polished Granite stone of approved shade in floor, otta in any pattern etc sizes upto 1200mm including average 20 mm thick cement mortar bedding in 1:6 laid and jointed with white cement and matching pigment including rubbing, re-polishing after fixing to remove any undulation between the joints (if required) with different grades of Emery, refilling of open joints, curing, daily cleaning and mopping, as per satisfaction of Architect and as directed by Engineer in charge at all floors/ all levels/ all heights and all shapes. (Only finished work will be measured.) Sample and mockup shall be approvd procurement of material.
20
-
-
... More
Providing material and labour for laying 8 to 10 mm thick machine cut polished Granite stone slabs of same shade as flooring and as per approved sample in skirting upto 100 mm high as per drawing (flush with plaster) laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including providing 10mm wide grove between skirting and plaster, rubbing and finishing complete. Shade of skirting must be match with flooring stone.
3
-
-
... More
Providing material and labour for laying approved quality average 18mm thick River wash finish Granite of required size, approved shade in floor, otta, skirting, pavement, plaza or similar in any pattern including average 20 mm thick cement mortar bedding in 1:6 laid and jointed with white cement and matching pigment including rubbing, curing, finishing, cleaning etc complete as directed by EIC. Sample shall be approved before execution. Laying patern shall be as per drawing and instruction of EIC for all floors/ all levels/ all heights and all shapes. (Only finished work will be measured.)
20
-
-
... More
Providing material and labour for fixing average 18mm thick mirror polish Granite of uniform size and colour for treads and risers of stair, sill, jams of window, coping etc size 1200mm to 2500 mm long, of approved shade, including necessary machine - cut edges (uniform thickness) rounded edges, as per design in required sizes and shapes over 20 mm (average) thick bedding of cement mortar 1:6 (1 cement: 6 coarse sand) laid and jointed with white cement and matching pigment including rubbing, re-polishing after fixing to remove any undulation between the joints (if required) with different grades of Emery, refilling of open joints, curing, daily cleaning and mopping, as directed for at least 15 days or up to the satisfaction of the EIC etc complete for all floors any heights, any lead and lift as per approved sample by Architect, drawings and instruction of EIC. The rate includes machine cut edges of uniform thickness, champhering and mirror polishing of edges and maintaing upto hand over the project.
230
-
-
... More
Providing material and labour for fixing machine cut average 18mm thick mirror polished Granite stone slab of approved shade as per approved sample for dado, cladding, skirting etc., in required design and pattern as per drawing, laid on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, or fixed with stone fixing adhesive as per manufacturer's specifications including mirror polishing, pencil sharped edges, edge polishing, rubbing, curing, finishing, necessary scaffolding, maintaining upto handling over the project etc complete for all floors any heights, any lead and lift etc complete as directed by Engineer Incharge. Baking coat plaster for dado shall be paid in relevant tender item. Shade of skirting must be match with flooring stone.
26
-
-
... More
Providing material and labour for fixing both side average 18mm thick mirror polished Granite stone slab as per sample approved by Engineer in charge with edges rounded and mirror polished, of required size fixed as urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement mortar 1:2 (1 cement : 2 coarse sand) as per drawing and as per direction of Engineer-in-charge. All expose edges shall be champhered and mirror polished. Rate shall be inclusive of chasing, cutting, edge champhering, edge polishing, curing, finishing, maintaining upto handling ovre the project etc complete for all floors all level etc complete as directed by Engineer Incharge.
12
-
-
... More
Providing material and labour for fixing mirror polished average 18mm thick best quality Granite stone slab as per sample approved by Engineer in charge with edges rounded and mirror polished, of required size fixed as platfrom/ vanity counter by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement mortar 1:2 (1 cement : 2 coarse sand) as per drawing and as per direction of Engineer-in-charge. 75mm high facia shall be fixed at the edge of platform with epoxy or stone fixing adhesive as per drawing. All expose edges shall be champhered and mirror polished. Rate shall be inclusive of chasing, cutting, pencil sharped edges, edge polishing, making holes, curing, finishing, maintaining upto handling ovre the project etc complete for all floors all level etc complete as directed by Engineer Incharge. Installed area of platform and facia shall be measured for payment.
11
-
-
... More
Providing material and labour for laying sandwich platform comprising of a) Sandwich of 18 mm thick single side polish Granite of approved size, shade and sample on top and 30 mm thick polished kota in bottom with 25mm thick cement mortar (1:4) in between b) At centre vertical sandwich supports of 30 mm thick two kota stone on sides and 20mm CM (1:4) in between and at both end walls vertical supports of 18 mm thick double side granite. c) 75 mm raised platform at bottom with kota on top and 50mm CM (1:4) at bottom, kota stone skirting as per design and approved sample. The rate includes rounding, champhering and mirror polishing of edges, facias of granite, MS support including necessary bonding adhesive (if required). Rate shall be also inclusive of curing, making holes & cutouts for sink, wash basin, Piller tap/ Bib tap but excluding the cost of MS work, plumbing fixtures ans sink. at all floors all height etc complete as directed by Engineer Incharge. (Only plan area shall be measured & paid for). Rate shall be included all kota & granite mentioned in above.
9
-
-
... More
Providing material and labour for laying machine cut single polished 18mm thick Jesalmer yellow stone in flooring, band etc as per design and drawing over 20 mm thick cement mortar 1:3 and pointing in joints in white cement with matching pigment, curing etc. complete. The rate should also include for polishing with different grades of emery, daily moping with water, buffing, finishing at all floors any heights, any lead and lift etc complete. as directed by Engineer Incharge.
20
-
-
... More
Providing material and labour for roughened strip 2.5 cm wide to form antiskid surface on treads of stairs in any type of stone including forming straight deep curved gishi (groove), 6 mm wide & 4 mm deep on two sides of the roughened area, chiseling, polishing the edges, sides and bottom of gishi etc. complete as per sample approved for all floor, all height. Only one time length of tread of stair shall be measured for payment.
528
-
-
... More
Providing material and labour for laying broken china mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles (of any shade) to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto surface using white cement including rounding off junctions and extending them upto 15 cm along the wall, curing, clearing with water and oxalic acid etc for all level, all height as directed by engineer in charge.
2460
-
-
... More
Providing material and labour for laying Cement Mortar for additional floor bedding in Cement Mortar 1:6 (1-Cement: 6 - coarse sand) including curing etc for all floor, all level all height. Additional bedding thickness shall be as per drawing and as directed by engineer in charge.
146
-
-
... More
Providing material and labour for laying Kota chips coving and skirting up to 30 cm height, rubbed and polished to granolithic finish, top layer 6 mm thick with kota stone chips of sizes from smallest to 4 mm nominal size, laid in cement sand mix 3:1 (3 cement : 1 sand) by weight in proportion of 4:7 (4 cement marble powder mix : 7 kota chips) by volume with 18 mm thick backing having under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 coarse sand) and remaining 6mm thick cast in situ terrazzo layer in Dark shade pigment with ordinary cement. Rate shall be inclusive of laying of terrazzo (Base and topping) to line and level, Grinding, polishing, grouting, hardening and sealing of concrete floor for all levels/ all heights etc. complete as directed by engineer in charge.
30
-
-
... More
Sec.10.0 Structural steel works
Providing material and labour for, fabricating, assembling, hoisting/ erecting and fixing in position at all heights/ all levels/ all floors/ all shapes & sizes with all leads & lifts using MS Rolled Steel Sections, Hollow sections, Tubular Sections, MS Plates, Chequered Plates, MS Pipes, Perforated Sheet, Flats, Bars , Angles, MS Sheet, Girder, Beam, cattle trap, deep threaded MS bolts, threaded J bolts, insert plate, support plate etc as per drawing. all confirming to latest relevant IS codes for the work of steel structures like staircases, railings, handrail, jali, gates, grills, bracings, platforms, brackets, monkey ladder, cattle trap, rungs, false ceiling frame work, Roof canopy, fencing posts, M.S. Screen & fencing jali frame work etc. including straightening, cutting, bending, bolting and welding the members all as per approved shop drawings and as per detailed specifications (for materials & workmanship) including necessary scaffolding/ staging etc. complete and comprising of Profile Cutting, Smooth grinding/ machining of edges/ faces/ all welding joints; Necessary welding; Machine drilling of holes for joining/ anchoring; dry sanding, degreasing (wet cleaning) & preparation of rustfree surface manually or mechanically, metal putty to make the surface even and smooth, 1 coat of epoxy primer and 2 coat of PU paint of approved make shade of paint over all the surfaces of the steel sections. The Contractor shall prepare shop drawing as per GFC drawing and as per actual site condition and get approved before execution by engineer in charge. (Standard measurements will be paid for as actual cut length used at site)
37239
-
-
... More
Providing and fixing in position, interlocking rolling shutter of approved make, made of 18 gauge, 75mm wide cold rolled GI lath interlocked, including top cover (20 gauge), spring, axles (specially designed shaft), guide rails (10 gauge), tees, iron pulleys, ball bearings, handles, arrangement for inside and outside locking arrangement, with Mechanical Type (Gear Arrangement), holding down bolts embedded in CC 1:2:4 / anchor fastener of HILTI or equivalent including 1 coat of Rustocap and 2 coat of Hi-Gloss Metal PU Paint of approved make and shade over all the surfaces etc. as directed. (Measurements considered for payments shall be clear size of opening plus guide channels on both the sides for width and 450mm on top for drum height.)
140
-
-
... More
Providing and fixing stainless steel (Grade 316) Railing and baluster system of approved make stair railing, hand rail, bump rail, guard rail, with knock down system made of Hollow or solid secion i.e. tubes, square, flat, plates, bar etc with base plate Cover cap, finishing accessories, infilled holding brackets, fixing accessories etc. for any type of design, shape (plain/ curvature), size as per drawing. Railing shall be top mounted or side/ wall mounted. Railing shall be fixed with SS 316 grade anchor fastner of required size and as per fixing position of approved make. No Welding OR Fabrication shall be allowed at site. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Sample shall be approved before execution. Contractor shall arrange mock up of railing system (2 or 3 no) in required length as directed by Architact and Engineer in charge. Contractor shall protact railing system uptill handeling over the project.
851
-
-
... More
SS water trough
Providing material and labour for, Fabricating and fixing SS 316 grade water trough of size 300mm x 450mm with 300mm high SS sheet cladding (dedo) made out of 1.2mm thick sheet and required size of angle, flat etc in satin/ brush finish including supporting fittings made out of SS 316 grade solid rods, flats, anges, compatible SS anchor fastener (mechanical or chemical) as per manufacturer's specifications, SS supporting arrangement, latth work, argon arc welding bending and bends as per the detail drawing with best (high) quality finish & as per the a sample approved by Architect and as directed by engineer-in-charge. Rate shall be inclusive of all material, labour and wastage for all floor, all height, all level. Water trough shall be measured in Rmt. Installed length shall be measered. Contractor shall prepare shop drawing based on concept drawing ant get approved before execution.
9
-
-
... More
Extra for providing material and labour for Hot dip galvanizing work confirming to IS 4759/ 2629/ 2633 with zinc of 610 GSM thickness on Cable tray, Railing, Handrail, facade framing, supports for mechanical equipments, garbage box, Street furniture and similar works etc made from solid flat, bar, RHS, SHS, tubular hollow sections etc. as per the drawing and as instructed by engineer in charge. The rate shall include preparing the surface by shot blasting/ acid washing prior to hot deep galvanizing, labor, tools, machinery etc complete (Sample to be approved). The weight of steel sections before galvanization shall be measured for payment. The cost of steel sections shall be paid for separately under relevant item.
4300
-
-
... More
Sec.11.0 Painting works
White washing with lime on wall and ceiling surface (two coats) to give an even shade including thoroughly booming the surface to remove all dirt, dust; mortar drops and other foreign matter etc complete for all floors, all heights, all level as directed by Engineer Incharge.
500
-
-
... More
Providing material and labour for applying Distempeing (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on wall and ceiling surfaces to give an even shade, over and including a priming coat with alkali resistance primer of approved brand after thoroughly brushing the surface and other foreign matter and also including preparing the surface even and sand parpered smooth etc complete for all floors, all heights, all level as directed by Engineer Incharge.
8328
-
-
... More
Providing material and labour for applying (Synthetic) Plastic emulsion paint (minimum 2 coats) having VOC (Volatile Organic Compound) content less than 50 gm/ltr on newly/ existing dry interior plastered surface including ceiling, roof etc. at all heights/ all levels/ all surfaces to give an even shade on prepared (putty and primer work) surfcae. Sample to be approved before starting of the work by Architect/ EIC. Rate shall be inclusive of the cost of scafolding but excluding the cost of primer and putty work.
10338
-
-
... More
Providing material and labour for applying required coats (min two coats) of white cement based putty after thoughly brushing the surfaces free from mortar dropping and other foreign matter. Preparing the surface even and sand papered smooth, after applying every coat of putty complete. Priming coat of alkali resistant cement primer (water or solvent based) is to be applied over prepared smooth surface (undulation free) etc. complete as directed by engineer-in-charge. After application of putty work, wall surface shall be in levelled and without undulation. The rate shall include the cost of filler for filling the cracks on surface, thoroughly brushing the surfaces with sand paper to make it free from mortar dropping and other foreign matter, scaffolding etc. as directed by engineer in charge.
19383
-
-
... More
Providing material and labour for applying Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials etc complete for all floors, all heights, all level as directed by Engineer Incharge. Product to be
6925
-
-
... More
Providing ,aterial and labour for Wall painting with anti microbial premium quality acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ liter of approved make and shade, with additional teflon surface protection, anti microbial formula & stain resistant, including applying additional coats wherever required to achieve even shade and colour over acrylic wall putty and one priming of approved make for all floor all height etc complete asdirected by engineer in charge.
100
-
-
... More
Providing material and labour for applying external finish of average 2 to 2.5mm thick acrylic polymer based texture and pattern with standard tool and applicator as specified by manufacturer on exterior surfaces at all heights including scaffolding to give even shades including thoroughly brushing the surfaces free from mortar droping and other foreign matter and sand paper smoothed as per the manufacture specifications etc. complete for all floor, all height, all level and up to the satisfaction of Engineer in-charge/ Architect. The rate includes making of grooves, pattas and finishing as directed by Engineer in charge. Paint shall be measured and paid in seperate tender item. (Item should be executed by approved applicator only.)
5831
-
-
... More
Sec.12.0 Roofing works
Providing material and labour for fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall have, light reflection 85% non-combustible as per BS 476 part IV, 100% humidity resistance and also having thermal conductivity0.043° w/m KC for the best thermal Insulation. The Light weight calcium Silicate tile shall be of approved texture of size 595 x 595 x 15 mm to be laid on true horizontal level suspended inter locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and size of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24x28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along spaced between main ‘T’ at 600mm centre to centre to form agrid of 1200x600mm and secondary cross ’T’ to be interlocked at middle of the 1200X600mm panel to form grid of size 600x600mm resting on periphery walls/ partitions on a perimeter wall with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick Densified edges light weight calcium silicate ceiling tiles in the grid including, cutting /making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required, Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized steel level clips of size 85X30X0.8mm, spaced at 1200mm centre to centre long main ‘T’ bottom exposed with 24mm of all T-sections shall be pre-painted with polyester baked paint, as per specifications, drawings and as directed by engineer-in-charge.
28
-
-
... More
Providing & Fixing M/F Suspended 12.5mm Plain Gypsum Board which includes GI Perimeter Channel is fixed along the perimeter of existing wall/ partition with the help of screws at 600mm centres. GI Ceiling Angle is suspended at up to suitable height as per sight conditions by fixing it to the GI soffit clit with Soffit Cleat and Rawl Plug creating 1220mm x 1220mm grid. GI Intermediate channel is fixed to the GI Ceiling Angle with 2 Nos of 4.2x13 GI metal to metal screw. The GI Ceiling Section is then fixed to the GI Intermediate Channel with the help of Connecting Clip and in direction perpendicular to the Intermediate channel at 457mm c/c. All framing and grid section shall be GI (as per IS 513) having yeild strength 300 mpa and galvanized finish of 150 GSM as per IS 277. Single layer of 12.5mm tapered edge Plain Gypsum Board (Confirming to IS 2095-Part-I, 2011) is then screw fixed to ceiling section with 25mm drywall screws at 230mm centres. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Jointing Compound & Joint Paper tape. The contractor should prepare shop drawings based on the concept drawing and get it approved by the Engineer-in-charge. After approval of drawings, the contractor shall prepare the sample based on the drawing and get it approved by the Engineer-in-Charge before execution. Rates shall be inclusive of cost of making cut outs/ openings for electrical fixtures, tube lights/ air-conditioners, grills, diffusers etc & providing additional sections for strengthening the openings/ cutouts, making grooves between wall & board or as per drawing for all floor, all level, all height etc as directed by Engineer in charge. Area of cutouts shall not be deducted and no extra payment shall be considered for additional sections provided. Only plan area shall be considered for payment.
312
-
-
... More
Metal False Ceiling:
Providing & Fixing true horizontal level suspended ceiling comprising of GI Clip-in with double pip self-leveling consisting of 600x600mm clip in tiles of galvanized steel in 0.5 mm thickness with bevel edge in pre-coated Global white color with Light Reflectance 75% and fire performance of Class 0/Class 1 as per BS 476 Part 6 & 7 standards. Warranty Certificate of 10 Years and Test Reports for Fire rating shall be provided by Vendor.
Installation: To comprise 3000mm long ‘C’ channels spaced at 1200mm centers securely fixed to the structural soffit using 6mm dia threaded rod connecting C- channel hanger at 1200mm C/C and anchor fastener. The last hanger at the end of each C channel should not be greater than 600mm from the adjacent wall. Use a C-channel connector for splicing two pieces of C-channels. 4000mm Main carriers (spring tee bars) shall be spaced at 600mm centers in a direction perpendicular to the C-channels and secured at every intersection with C channel using a hanger. Use connector to splice two pieces of main carriers. Tiles should be clipped in between two carriers (spring tee bars) from below. Perimeter trims to be of wall angles of size 3000x19x32mm in white color secured to walls at 450mm maximum centers. Installation to be carried out by trained Installation team and as per recommended procedure of approved manufacturer.
Rates shall be inclusive of cost of making cut outs/ openings for electrical fixtures, tube lights/ air-conditioners, grills, diffusers etc & providing additional sections for strengthening the openings/ cutouts, scafolding, making grooves between wall & board or as per drawing etc complete for all level, all height, all floor amd as directed by Engineer in charge. Only plan area shall be considered for payment.
239
-
-
... More
Perforated Gypsum tile acoustic false ceiling : Supplying material labour for fixing of Suspended ceiling system with 12.5mm thick glass fibre perforated gypsum plaster board/ tile of any size having any type of edges and any shape, any size, any pattern perforation and GI suspended framing system. This includes ribbed frame Perimeter Channel fixed to brick wall/partition with the help of nylon sleeves and screws at 600mm centres along the perimeter of ceiling. Then suspending ribbed section used as intermediate channel from the soffit at 1220mm centres with Ceiling Angle fixed to RCC Slab with Soffit Cleat and steel expansion Fasteners @ 600mm Centres respectively. Ultra frame ribbed Ceiling Section are then fixed to Intermediate channel with the help of four point connecting clip (0.8mm thick) and in perpendicular direction to the intermediate channel at 600mm centres. All framing and grid section shall be GI (as per IS 513) having yeild strength 300 mpa and galvanized finish of 150 GSM as per IS 277. 12.5mm thick glass fibre perforated gypsum plasterboards/ tile of any size having any shape, any size, perforation of any pattern is screw fixed with 25mm long Drywall screws at 230 mm centres. 50mm thk 24kg/m3 glasswool should be placed between the frame and perforated board with the help of Glasswool tissue bag. The screw fixing of gypsum plasterboards to the metal framing at the periphery, openings and cut edges should be at 150mm centres. Finally square or tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Jointing compound, Joint Paper tape and two coats of Drywall Top Coat as per the drawing & approved sample. Rates shall be inclusive of cost of making cut outs/ openings for electrical fixtures, tube lights/ air-conditioners, grills, diffusers etc & providing additional sections for strengthening the openings/ cutouts, scafolding, making grooves between wall & board or as per drawing etc complete for all level, all height, all floor amd as directed by Engineer in charge. Only plan area shall be considered for payment.
214
-
-
... More
Providing material and labour for Fixing of Mineral Fibre Suspended Ceiling System with Bevelled Tegular edge hygienic tile with grove (Bioguard) with 15mm Exposed grid. The tiles should have Humidity Resistance (RH) of 95%, Light Reflectance 90%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0/Class 1 (BS 476 Part 6 & 7), in module size of 600x600 x minimum 15mm with Anti Microbial coating on the face of the tile. The tile shall be laid on any type of grid system (Silhouette/ superfine/ select grid system of Armstrong) with 15mm white flanges incorporating a 6mm central reveal in white/ black colour and with a web height of 45mm and a load carrying capacity of minimum 15.68 Kgs/M2 & minimum pull out strength of 100 kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with suspension system of same make. INSTALLATION: To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum centre. The First/Last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centres. SUSPENSION SYSTEM accessories shall be of same make and consisting of M6 Anchor Fasteners with Vertical Hangers made of Galvanised steel of size 26 x 26 x 25 x 1.2mm with a Galvanised Thickness of 80gsm, A pre Straightened Hanger wire of dia – 2.5 mm of 1.8 m length, thickness of 80gsm and a tensile strength of 344-413 MPa, along with Adjustable hook clips of 0.8mm thick, galvanised spring steel for 2.68 mm with a minimum pull strength of 110 kg. The adjustable clip also consists of a 3.5 mm aquiline wire to be used with the main runner.Contractor shall provide 0 year warranty against Tile & Grid system used together. Installation shall be done by approved applicatior of manufacturer all floors/ all heights/ all levels including scaffolding etc as directed by Engineer in charge.
65
-
-
... More
Providing material and labour for fixing fabricated metal single shutter/ double shutter trap door made from 0.8 mm MS sheet, Inner Frame - 1.5 mm, Outer Frame - 2mm MS sheet and finished with powder coating of approved shade/ enamel/ acrylic paint (primer + 3 coats of paint) of approved make and shade. Door shall be installed on existing false ceiling framing with extra MS suspender with necessary hardware like allen key lock, hinges/ pivot, safety chain etc complete as directed by engineer in charge. Rate shall be inclusive for providing, loading/ unloading, transporting and installation at all floor all height but excluding the cost of extra suspender for installing the trap door. Area of trap door with frame shall be measured for payment.
31
-
-
... More
Fiber cement board :
Providing material and labour for fixing exterior grade cement fibre board/ plank cement pattas of 8 mm thickness at exposed concrete ceiling/ wall/ beam bottom with brass/ SS head screws as per drawings, specification and sample approved at all floors, all levels and all shapes etc complete as directed by engineer in charge. Rate shall be inclusive of all material, labour, scafolding, tools, tackes etc complete.
370
-
-
... More
Providing and fixing of 10 mm thick Multicell UV protected Polycarbonate Panel System with 3 cells and 4 walls structure over structural steel / MS purlins per approved colour/shade for plain or curved (dome type) roofing work. Co-extruded UV protected panels shall have width of 900mm to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical standing seam at both sides of the panel. Welding or gluing up of standing seam is not acceptable. Panels shall be fixed on purlins with Stainless steel retention clips and connectors. Snap-on connectors to interlock the panels shall have a grip-lock single tooth locking mechanism to ensure maximum uplift capability. Panels shall have End-cap/ Aluminium U-profile/ Glazing bar for ends as per requirement. The weight of the system shall not be less than 2.30 kg per square meter. Panel shall be co-extruded with specialist-glare compound to make it anti-glare/soft light to prevent glare and sun streaks. Panels shall be fixed over structural steel/ MS purlins conforming to the detail technical specifications and as per approved architectural drawings. The rate shall include the cost of above specified materials, fixing of the sheet, scaffolding and labour charges for working at all levels, leads and heights as directed by engineer in charge. Surface area of roof sheet shall be measured for payment. The supporting MS structure for panel shall be paid separately in relevant tender item.
20
-
-
... More
Sec.13.0 Demolition & Dismantling Work
Demolition including stacking of serviceable materials and disposal or unserviceable materials at nonobjectionable place with all leads and lifts including cutting the reinforcement, and finishing the broken surfaces to match with the surroundings etc. complete : RCC Works.
347
-
-
... More
Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) P.C.C. work
223
-
-
... More
Demolition of Brick Work/AAC block work with plastered surface/ wall dedo including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.
771
-
-
... More
Dismentaling tiled of stone floors/ wall tiles laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.
200
-
-
... More
Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift.(i) Not exceeding 3 Sq.M. in area.
30
-
-
... More
Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift.(ii) Exceeding 3 Sq.M. in area.
200
-
-
... More
Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift.
500
-
-
... More
Dismentling steel work including distempering and stacking the materials with all lead and lift.
11053
-
-
... More
Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, flushing tank etc. including stacking the materials with all lead and lift.
150
-
-
... More
Dismentalings any type of ceiling or partition walls, wooden trellies work including grid and suspension system with all elements stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.
150
-
-
... More
Sec.15.0 General Development and Road works
Box cutting the road surface to proper slope and camber for making a base for road work including removing the excavated stuff and depositing on the road side slope as directed upto 1 Km lead and all lift.
2602
-
-
... More
Providing and laying rubble soling in plinth and sub-base of road, compacted thickness specified as following, using specified size of hard stones for average 150mm thick soling, filling, covering and leveling the surface with a layer of earth after filling the voids (upto 25%) with sand, smaller sized black trap stones 20-40mm, 40-63mm, 63-90, 90-150mm size of stone/metals or stone chips, including watering, ramming well and compacting or consolidating each layer by static roller/ vibratory roller of required capacity as directed by Engineer-in charge.
917
-
-
... More
Construction of Granular Sub Base (GSB) by providing coarse graded material of any grade, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, including all material, labour, machinery with all leads and lifts etc. complete as per MORTH specification and as directed by Engineer in charge.
1735
-
-
... More
Providing material and labour for, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tripper to site, laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density including all material, labour, machinery with all leads and lifts etc complete as per MORTH specification and as directed by Engineer in charge.
868
-
-
... More
Providing material and labour for laying precast fair finish curbing of (factory made) RCC M25 grade curbing of required size with all accessories including necessary excavation, cutting the road, laying PCC 1:4:8 (1 cement: 4 sand: 8 stone aggregate 20/37 mm. down size), exposed rendering, curing, flush pointing CM 1:3 as per the drawing, as per approved sample and as directed by Engineer in charge.
100
-
-
... More
Providing material and labour for laying shot blasted Non-interlocking (factory made) high density 60 mm thick M35 grade any colour brick type paver blocks of size 200mm x 200mm/ 200mm x 100mm of approved make and shade for footpath, parking areas, service lanes and other areas as mentioned in the drawing including average 50 to 80 mm thick bedding layer of coarse sand below paver block. Laid paver block shall be mechanically compacted and as directed by Engineer in charge. The work shall be executed in line and level by skilled mason of flooring work only for paver blocks. It should be laid in such a way that the No cutting of the paver block to be necessary and if required, cutting of paver block by machine cut only. The Finished surface of the paver block shall have coarse sand texture finish. Sample to be approved before starting of the work by Architect/ EIC.
2682
-
-
... More
Providing material and labour for laying shot blasted Non-interlocking (factory made) high density 80 mm thick M45 grade any colour brick type paver blocks of size 200mm x 200mm/ 200mm x 100mm of approved make and shade for footpath, parking areas, service lanes and other areas as mentioned in the drawing including average 50 to 80 mm thick bedding layer of coarse sand below paver block. Laid paver block shall be mechanically compacted and as directed by Engineer in charge. The work shall be executed in line and level by skilled mason of flooring work only for paver blocks. It should be laid in such a way that the No cutting of the paver block to be necessary and if required, cutting of paver block by machine cut only. The Finished surface of the paver block shall have coarse sand texture finish. Sample to be approved before starting of the work by Architect/ EIC.
50
-
-
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm PVC couting on outer side including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
297
-
-
... More
Providing material and labour for laying cement concrete broom finish/ smooth finish pavement for plinth protection/ CC Road 100 –150 mm. thick with M25 concrete including giving a floating coat of 1:1 cement mortar, with Nominal temperature steel, tie bar, dowel bar as per MORTH specifications of section -6 etc complete as specified by the Engineer-in-charge. The rate shall be exclusive of reinforcement steel, dowel bar etc. The same shall be paid in relevant tender items. Rate shall be inclusive of concrete (to be laid in alternate panels size shall be apprx 4.5mt X 5.0mt ) with fair finished steel channel formwork, saw cutting of construction & contraction joints in width 3 to 5 mm x 1/4 to 1/3 thickness of pavement, filling the 25mm x 20 mm (BXD) expansion joint approximately at every 30 mt with readymix bitumiNous filler as per sample approved & directed by engineer incharge etc complete. Screened Sand to be only used.
812
-
-
... More
Vaccum dewatering Extra for carrying out vaccum dewatering & Power floater treatment in roads, pavements, floors well compacted, mechanically vibrated with screed vibrator, finished to required levels, floated with neat cement and power trowelled to get desired smooth finish / broom finish, over a leveling course, including MS channel or box shuttering, curing for 10 days with gunny bags etc complete. The size of panel should be approximately 3.75 x 5.5 m or as directed by Engineer. The Contraction joints to be formed at every 5m distance by grooving with mechanical saw within 48 hrs. Groove/sawed joints/ longitudinal joints shall be made of 6mm width and 25 mm depth min (1/3 rd depth of the pavement) as shown in the drawing. The rate shall be inclusive of labour, making the grooves and machinery cost.
5407
-
-
... More
Providing material and labour for laying of Hot applied Thermoplastic compound 2.5 mm thick including Reflectorising Glass Beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35 & finished surface to be level, uniform and free from streaks and holes etc complete as directed by Engineer in charge.
184
-
-
... More
Supplying material and labour for fixing cat eye (Stimsonite) made out from Acrilo beautile sterine injuction high compressed molding with reflector made of MMC (prismatic type of size 12cm x 6cm x 2.5cm) provided with bituminous adhesive 100g. with each unit for fixing. (Engineer grade) etc complete as directed by Engineer in charge.
50
-
-
... More
Providing material and labour for fixing rumblers strips of 500 x 100 x 15 mm of any design suggested by Architectect/ EIC like bottom design, chequered design, anti skid pattern specially designed for road grip as per drawing & sample approved by Architect which is covered with premix bituminous carpet at 1m centre to centre at approved locations to control speed marked with white strips of road marking paint etc complete as directed by Engineer in charge.
48
-
-
... More
Providing material and labour for fixing 600mm dia Convex mirror made out of ABS/ PC plastic of approved make having viewing distance of 6.0 Mt. fixed on wall at basement ramp as per standard and as directed by Engineer in charge.
50
-
-
... More
Providing material and labour for fixing FRC (Fiber reinforcemed concrete) Heavy Duty Man Hole Cover with frame of intrnal dia 560mm with 100x2mm MS flat allround, 16mm ø plain round bar for lifting the cover & should be fitted with plastic cups etc complete as directed by engineer in charge.
On the upper periphery of frame 25 x 3 mm wide MS flat with hot dip galvanizing should be well embed in concrete to protect the edges of frame.
50
-
-
... More
Providing material and labour for fixing Ductile iron manhole frame and cover/ grating/ chamber cover of approved make and type. Man hole cover shall be any type (hinged type, double sealed or recess type), any shape (square/ rectangle/ square frame with round cover) any grade (light duty/ medium duty/ heavy duty) of required loading capacity having double sealed system as per manufacturing standard BS EN-124, with proper lifting arrangement, black bituminous coating, including fixing in CC and finishing etc complete as directed by engineer in charge. Cover shall be as per drawing and as per approved sample. Recess manhole cover depth shall be according to pavement/ finish as per drawing.
1010
-
-
... More
FRP Recessed Man hole cover
Providing and Fixing heavy duty double seal FRP Manhole cover with frame of 25MT capacity, in matching shade of surrounding pavement and design according to EN - 124:1994 of HP or equivalent of clear opening size of 600mm x 600mm and recesse depth 80mm, with client's logo etc. complete as approved by architect and as directed by engineer in charge. Frame shall be embaded in concrete of M25 grade and top level of frame shall be flush with road level. Frame and cover shall be with 4 number lifting key with proper lifting arrangement. Rate shall be inclusive of cover frame and concrete work. The rate includes carting upto any lead from store to site as per directed by engineer in charge.
104
-
-
... More
Providing and fixing high quality FRP gratings of size 40mm x x40mm x 30mm high having the load tested as per BSEN 124, IS1726 & AASHTO M306 standards of approved make and shade. Grating shall be directely fixed on wall of RCC channel as per drawing and as directed by Engineer in charge. Actual installed area of grating shall be meaured for payment with out considering any wastage.
52
-
-
... More
Providing and fixing high quality 35 to 40 mm thick FRP water gully cover wothout frame of required size of 5 T capacity having the load tested as per BSEN 124, Is1726 & AASHTO M306 standards of approved make and shade. Gully cover shall be directely fixed on wall of RCC channel as per drawing and as directed by Engineer in charge. Actual installed area of cover shall be meaured for payment with out considering any wastage.
13
-
-
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
189
-
-
... More
FRP UG Tank cover
Providing and Fixing mediumduty double seal FRP UG Tank cover with frame of 5MT capacity, in matching shade of surrounding pavement and design according to EN - 124:1994 of HP or equivalent of clear opening size of 600mm dia having frame thickness average 50mm and cover thickness 25mm, of weight average 35 Kg with client's logo etc. complete as approved by architect and as directed by engineer in charge. Frame shall be embaded in concrete of M25 grade and top level of frame shall be flush with road level. Rate shall be inclusive of cover frame and concrete work.
30
-
-
... More
Garden Soil Filling Providing material and labour for Filling mixture of good quality garden soil obtained from outside for all lead and lift with farm yard manure and pesticides in exacavated tree pit, tree pit, shrub area including watering, ramming well, consolidating, compacting and dressing etc. complete, as directed by engineer in charge. Excavation shall be paid in revevant tender item.
147
-
-
... More
Providing material and labour for making tree pit with 800mm diameter NP2 class hume pipe with 600 mm height to be placed on the filled garden soil and outside area of the hume pipe to be filled with the good quality earth. Hume pipe shall be filled with the mixture of garden soil, farm yard manure and required pesticides etc. complete as directed by Engineer in charge. Excavation and soil filling shall be paid in relevant tender item.
25
-
-
... More
Tree plantation
Supplying material and labour for planting of trees including termite treatment, and planting of plants in existing prepared tree pit or excavated pit. (height 4'-6' above bags/pots). Soil mounts 4”-6” in size. Tree plantation should be carried on neatly accurately and with perfection as per drawing and instruction given by the EIC. Plastic bags or pots should be removed carefully and soil around the roots should not be dropped or disturbed much. Bill shall be placed after completion of maintenance period but not before stabilizing the hedges. Rates for mortality to be inclusive. Providing and fixing tripod made of wooden balli, height 1.50mtr. Top bracket to be 300mm x 300mm. leg embedded in ground up to 300mm and to have tar coat. Work shall be done as shown in the drawing or as directed and approved by EIC. Excavation and soil filling shall be paid in relevant tender item.
50
-
-
... More
Supplying well grown shrub plants and ground cover plants of average height 3' to 4' and planting in planter box or prepared ground area (prepared and filled with garden soil filling). Plants should be disease free and fungus free in 8"x 10" polythene bag. Plastic bags or pots should be removed carefully and soil around the roots should not be dropped or disturbed much. Distance between two shrub shall be as per drawing. Bill shall be placed after completion of maintenance period but not before stabilizing the shrubs. Mortality rates to be inclusive. Work shall be as directed and approved by Eingeer in charge. The ground coverage should be dense and uniform throughout the planting area. Excavation and soil filling shall be paid in relevant tender item.
300
-
-
... More
Lawn Plantation :
1) Supplying material and labour for filling with good quality garden soil obtained from outside, including watering, ramming well, consolidating, compacting and dressing etc. complete, as directed. Dressing and leveling the area by spreading 2"-3" of good quality soil & manual compaction as required and as approved by EIC. 2) Supply and spreading of FYM (2.50 Cum in 100 Sqm area) shall be done in proper slope as per mention in drawing including watering and fine dressing. Termite treatment to be done before laying of FYM. 3) Supplying and planting of the specified lawn on above described surface. Plantation of lawn at distance 8cm c/c. When the grass is approximately 3 cm high, it shell be rolled with a light wooden roller and when it has grown up to 5 to 8 cms above the ground, weeds must be removed and after that lawn shall be cut to the appropriate height using the lawn cutter for minimum 3 to 4 times. Weeds shall be removed regularly and periodic top dressing of FYM shall be done during the maintenance period (Bill shall be placed after completion of maintenance period.) Work shall be done in the pattern as shown in the drawing or as directed and approved by Engineer in charge. Rate shall be inclusive of surface preparation for lawn planting, Termite Treatment, Plantation, Maintenance, Watering till the end of Maintenance Period as per the instruction of EIC. Garden soil filling with FYM shall be paid in relevant tender item.
3076
-
-
... More
Tree pit cover
Providing material and labour for fixing tree pit cover around the tree pit, factory made exposed /fare finish precast Tree pit cover block of two halve in FRC concrete of size - 0.90Mt x 0.90Mt x 0.065mt including transporting, fixing etc. complete as directed by Engineer in charge. The rate shall also include for erecting and fixing the pieces in position as shown in the drawing with necessary equipments without ant demage. (Sample to be approved)
10
-
-
... More
Providing material and labour for fixing tree guard upto height of 1.8 metre fabricated from 30 x 30 x 3mm angle and 30 x 30mm weld mesh as per drawing and details. Necessary provisions for the anchoring to floor shall be made in the tree guard. Tree guard shall be painted with two coats of yellow oxide and three coats of enamel paint as per the shade approved by EIC.
10
-
-
... More
Providing, casting, hoisting, installing in position Precast Reinforced cement concrete (M25) Bench as per design and drawing having 40mm thick mirror polished kota of approved shade on top. groove of same width as mortar thickness shall be provided between top kota stone and concrete top as per drawing. Remaining surface of bench shall be expose rcc work. All edges of kota shall be champhered and polished. Rate shall be inclusive of RCC, reinforcement and kota work with all material, labour for making, fixing, loading, unloading, hoisting, placing, polishing etc complete as directed by engineer in charge. Sample shall be approved before execution of work.
Size of Bench - 1500 L x 450 mm W x 380mm H (100mm thick seat) with tappered solid base (1100mm x 200mm at bottom and 1200mm x 300mm at top)
30
-
-
... More
Providing material and labour for fixing G.I. barbed wire Fencing on existing MS post provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs etc for all height all level as directed by Enginer in charge. (cost of MS posts to be paid for separately) Payment to be made per metre cost of total length of barbed wire used.
6660
-
-
... More
Providing material and labour for fixing in position 80 mm thick factory made machine batched & machine mixed Solid Precast RCC Rectangular Covers on cable trench of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.
260
-
-
... More
Providing material and labour for placing in position 80 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.
119
-
-
... More
Supplying mterial and labour for laying of following size DWC HDPE pipe of 63mm dia outer dia ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete for all depth as directed by Engineer in charge.
1200
-
-
... More
Supplying mterial and labour for laying of following size DWC HDPE pipe of 90mm dia outer dia ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete for all depth as directed by Engineer in charge.
100
-
-
... More
Supplying mterial and labour for laying of following size DWC HDPE pipe of 120mm dia outer dia ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete for all depth as directed by Engineer in charge.
900
-
-
... More
Supplying mterial and labour for laying of following size DWC HDPE pipe of 160mm dia outer dia ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete for all depth as directed by Engineer in charge.
100
-
-
... More
Supplying mterial and labour for laying of following size DWC HDPE pipe of 200mm dia outer dia ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete for all depth as directed by Engineer in charge.
1200
-
-
... More
Sec.16 Signage Works
SS letter sign:
Providing, Making and fixing 150mm high SS 304 letter with back lited by LEDs/ SMD lightings behind the text made of 3/4" SS 304 channel (1mm thick) for signage in Gujarati, Hindi and English languages and the font style as approved sample or as per design and drawings. It shall be made from ISI Brushed S.S. 304 using Water jet / CNC cutting machine. It shall be fixed on the wall with chemical anchor fastener at any level any height. All Edges and corners shall be smoothened. Width of the letter shall as per the proportion of the word for depth 1". Stainless Steel Patti shall be argon welded. Duco paint of approved make, shade in required coat with necessary primer and putty shall be applied on external surface of letter. It shall be paid in as per alphabet no. In Gujarati/ Hindi language one letter shall considered with its contents (i.e. Kano, Matra etc.) i.e. 'chhi' letter in Guajarati shall be considered as one letter. Height of letters may vary + 3" shall be included in quoted rate. The rate shall be inclusive of scaffolding, drilling, adhesive material etc. complete for all heights.
20
-
-
... More
SS letter sign:
Providing, Making and fixing 200mm high SS 304 letter with back lited by LEDs/ SMD lightings behind the text made of 3/4" SS 304 channel (1mm thick) for signage in Gujarati, Hindi and English languages and the font style as approved sample or as per design and drawings. It shall be made from ISI Brushed S.S. 304 using Water jet / CNC cutting machine. It shall be fixed on the wall with chemical anchor fastener at any level any height. All Edges and corners shall be smoothened. Width of the letter shall as per the proportion of the word for depth 1". Stainless Steel Patti shall be argon welded. Duco paint of approved make, shade in required coat with necessary primer and putty shall be applied on external surface of letter. It shall be paid in as per alphabet no. In Gujarati/ Hindi language one letter shall considered with its contents (i.e. Kano, Matra etc.) i.e. 'chhi' letter in Guajarati shall be considered as one letter. Height of letters may vary + 3" shall be included in quoted rate. The rate shall be inclusive of scaffolding, drilling, adhesive material etc. complete for all heights.
20
-
-
... More
SS letter sign:
Providing, Making and fixing 300mm high SS 304 letter with back lited by LEDs/ SMD lightings behind the text made of 1-1/4" SS 304 channel (1mm thick) for signage in Gujarati, Hindi and English languages and the font style as approved sample or as per design and drawings. It shall be made from ISI Brushed S.S. 304 using Water jet / CNC cutting machine. It shall be fixed on the wall with chemical anchor fastener at any level any height. All Edges and corners shall be smoothened. Width of the letter shall as per the proportion of the word for depth 1". Stainless Steel Patti shall be argon welded. Duco paint of approved make, shade in required coat with necessary primer and putty shall be applied on external surface of letter. It shall be paid in as per alphabet no. In Gujarati/ Hindi language one letter shall considered with its contents (i.e. Kano, Matra etc.) i.e. 'chhi' letter in Guajarati shall be considered as one letter. Height of letters may vary + 3" shall be included in quoted rate. The rate shall be inclusive of scaffolding, drilling, adhesive material etc. complete for all heights.
20
-
-
... More
Providing, Making and fixing SS 304 Emboss LOGO with back lited by LEDs/ SMD lightings behind the logo of size as per drawing for signage in English/Gujarati and the font style as approved sample or as per design and drawings. SS section shall be curved/ bend in shape of letter and same shape CNC cut letter. It shall be fixed on the wall with chemical anchor fastener at any level any height. All Edges and corners shall be smooth. Duco paint of approved make, shade in required coat with necessary primer and putty shall be applied on external surface of letter. Rate shall be paid in sqm. The rate shall be inclusive of scaffolding, drilling, fasteners, adhesive material etc complete for all heights as directed by engineer in charge. The rate shall also include cost of scaffolding, drilling, fabrication, finishing, adhesive material, sealant etc at all height and all lead. The contractor should submit the drawings based on concept design and do the sampling and get it approval before execution.
5
-
-
... More
ACP sheet signage :
Providing, Making and fixing 3 mm thick ACP sign of any shape and size and of approved make to be cut on CNC router cutting and smoothen all corners and edges. Matter shall be cut in 3M High intensity prismatic Reflective vinyl ASTM Type 4 and paste on it as per design and detail and as per manufacturer's specifications. UV stabilized lamination shall be done on it. The ACP sheet shall be fixed with clamp and angle on new or existing MS Pole as per drawing. Content of sign shall be letters (In Gujarati & English), graphics / maps, signs etc. in any colour as per design, drawing and approved by Architect and Engineer. All side of box shall be covered with fresh ACP sheet, but only one side elevation area shall be measured and paid in sqmt. Cost of MS Pole and Civil works shall be paid as per relevant tender items. The rate shall also include cost of scaffolding, drilling, fabrication, finishing, adhesive material, etc at all height and all lead, angle, fixing charges, etc. The contractor should submit the drawings based on concept design and do the sampling and get it approved before execution.
20
-
-
... More
Surface/ wall mounted signs
Providng and fixing of Modular Signages using Aluminium extrusions (Alloy 6060) with Anodizing (Thickness 15-20 microns). ISO:9001-2008 product with Premium grade Anodizing as per Qualanod and Qualicoat International standards. Internal graphics to be made of 3M vinyl printed with Hp latex 3rd Gen Eco friendly non toxic inks with UV lamination and 2 year print warranty. Sign panel shall be finished with anti-reflex cover 1mm thick with one side Matt and other side Glossy finish. Polypropylene (PP) End caps which can be fixed to the extrusion with the help of screws. Panels shall be clicked on to the end caps. Aluminium framing shall be fixed on surface with SS 304 screw and signage pabnel shall be laid on aluminium framing as per manufacturer's specification. Rate shall be inclusive of total modular signage system for all level, all height etc complete as directed by engineer in charge. Sampe shall be approved before execution and mockup shall be done with approved sample for 2 to 3 number of signage.
3
-
-
... More
Wall projected
Providng and fixing of Modular Signages using Aluminium extrusions (Alloy 6060) with Anodizing (Thickness 15-20 microns). ISO:9001-2008 product with Premium grade Anodizing as per Qualanod and Qualicoat International standards. Internal graphics to be made of 3M vinyl printed with Hp latex 3rd Gen Eco friendly non toxic inks with UV lamination and 2 year print warranty. Sign panel shall be finished with anti-reflex cover 1mm thick with one side Matt and other side Glossy finish. Polypropylene (PP) End caps which can be fixed to the extrusion with the help of screws. Panels shall be clicked on to the end caps. Projection Bracket shall be of 3mm Aluminium extrusions having Anodized finish (same as framing). Projection Bracket shall be fixed on wall with SS 304 screw and signage panel shall be laid on aluminium framing as per manufacturer's specification. Rate shall be inclusive of total modular signage system for all level, all height etc complete as directed by engineer in charge. Sampe shall be approved before execution and mockup shall be done with approved sample for 2 to 3 number of signage.
3
-
-
... More
Ceiling Hanging
Providng and fixing of Modular Signages using Aluminium extrusions (Alloy 6060) with Anodizing (Thickness 15-20 microns). ISO:9001-2008 product with Premium grade Anodizing as per Qualanod and Qualicoat International standards. Internal graphics to be made of 3M vinyl printed with Hp latex 3rd Gen Eco friendly non toxic inks with UV lamination and 2 year print warranty. Sign panel shall be finished with anti-reflex cover 1mm thick with one side Matt and other side Glossy finish. Polypropylene (PP) End caps which can be fixed to the extrusion with the help of screws. Panels shall be clicked on to the end caps. Aluminium framing shall be suspended from ceiling with suspension clips and cable (SS 304) with adjustable arrangement and signage panel shall be laid on aluminium framing as per manufacturer's specification. Rate shall be inclusive of total modular signage system for all level, all height etc complete as directed by engineer in charge. Sampe shall be approved before execution and mockup shall be done with approved sample for 2 to 3 number of signage.
3
-
-
... More
Floor Directory Signage
Providng and fixing of Modular Signages (removable) using Aluminium extrusions (Alloy 6060) with Anodizing (Thickness 15-20 microns). ISO:9001-2008 product with Premium grade Anodizing as per Qualanod and Qualicoat International standards. For Flat panels, plotter cut vinyl letters to pasted and for sliding profile print to be made of 3M vinyl printed with Hp latex 3rd Gen Eco friendly non toxic inks with UV lamination and 2 year print warranty. Sign panel shall be finished with anti-reflex cover 1mm thick with one side Matt and other side Glossy finish. Polypropylene (PP) End caps which can be fixed to the extrusion with the help of screws. Panels shall be clicked on to the end caps. Aluminium framing shall be fixed on surface with SS 304 screw and signage pabnel shall be laid on aluminium framing as per manufacturer's specification. Rate shall be inclusive of total modular signage system for all level, all height etc complete as directed by engineer in charge. Sampe shall be approved before execution and mockup shall be done with approved sample for 2 to 3 number of signage. (Measurement : Actual area for directory signage shall be considered for payment.)
5
-
-
... More
You are here/ map signage
Providng and fixing of Modular Map Signages using Aluminium extrusions (Alloy 6060) with Anodizing (Thickness 15-20 microns). ISO:9001-2008 product with Premium grade Anodizing as per Qualanod and Qualicoat International standards. For Map, plotter cut vinyl letters to pasted and for sliding profile print to be made of 3M vinyl printed with Hp latex 3rd Gen Eco friendly non toxic inks with UV lamination and 2 year print warranty. Sign panel shall be finished with anti-reflex cover 1mm thick with one side Matt and other side Glossy finish. Polypropylene (PP) End caps which can be fixed to the extrusion with the help of screws. Panels shall be clicked on to the end caps. Aluminium framing shall be fixed on surface with SS 304 screw and signage pabnel shall be laid on aluminium framing as per manufacturer's specification. Rate shall be inclusive of total modular signage system for all level, all height etc complete as directed by engineer in charge. Sampe shall be approved before execution and mockup shall be done with approved sample for 2 to 3 number of signage. (Measurement : Actual area for directory signage shall be considered for payment.)
5
-
-
... More
Floor indication marking Signage Providing, Making and fixing 1000mm dia circle and min 600 mm high letter made of 1" SS 304 channel (1mm thick) for signage in English languages and the font style as approved sample or as per design and drawings. It shall be made from ISI Brushed S.S. 304 using Water jet / CNC cutting machine. It shall be fixed on the wall with chemical anchor fastener at any level any height. All Edges and corners shall be smoothened. Width of the letter shall as per the proportion of the word for depth 1". Stainless Steel Patti shall be argon welded. Duco paint of approved make, shade in required coat with necessary primer and putty shall be applied on external surface of letter. It shall be paid in as per alphabet no. In Gujarati/ Hindi language one letter shall considered with its contents (i.e. Kano, Matra etc.) i.e. 'chhi' letter in Guajarati shall be considered as one letter. Height of letters may vary + 3" shall be included in quoted rate. The rate shall be inclusive of scaffolding, drilling, adhesive material etc. complete for all heights.
5
-
-
... More
Pylon signage - 800mm x 2000 mm
Providing and fixing of Totems of size 800mm x 2000 mm using Aluminium extrusions (Alloy 6060) with Anodizing (Thickness 15-20 microns). ISO:9001-2008 product with Premium grade Anodizing as per Qualanod and Qualicoat International standards. Internal structure to be made from ms section of required size with proper support in between and 3mm ACP to be slided from both sides. 3mm ACP to have 3M vinyl printed with Hp latex 3rd Gen Eco friendly non toxic inks with UV lamination and 2 year print warranty 3 mm ACP sheet with High intensity Prismatic Grade reflecitve sheeting with top hat of 2 mm Aluminium and bottom hat of MS 6 mm thick depending on size of Pylon.
2
-
-
... More
Pylon signage - 450X1200
Providing and fixing of Totems of size 450mm x 1200mm using Aluminium extrusions (Alloy 6060) with Anodizing (Thickness 15-20 microns). ISO:9001-2008 product with Premium grade Anodizing as per Qualanod and Qualicoat International standards. Internal structure to be made from ms section of required size with proper support in between and 3mm ACP to be slided from both sides. 3mm ACP to have 3M vinyl printed with Hp latex 3rd Gen Eco friendly non toxic inks with UV lamination and 2 year print warranty 3 mm ACP sheet with High intensity Prismatic Grade reflecitve sheeting with top hat of 2 mm Aluminium and bottom hat of MS 6 mm thick depending on size of Pylon.
2
-
-
... More
Providing and fixing Signage at Building terrcae or at other place made of -
1) 3mm thick Acrtlic to Acrylic cover letter in white colour having 100mm embossed in text or logo as per drawing or as suggested by EIC.
2) ACP/ GI reverse channel letter to uphold front letter
3) All side embossed by 90mm Aluminium channelium illuminate from front side
4) IP 67 grade water proof LEDs/ SMDs modules with 3 year opt door warrenty 5) Water proof/ Rain proof power supply with complete wiring including on site fixing for all height all level 6) Signage panel shall be fixed on MS struxcture, which shall be paid i relavent tender item.
7) installed signage board area shall measured for payment.
3
-
-
... More
02-PLUMBING WORKS
Sec.1.0 WATER SUPPLY
Construction of 2 Bore Wells at Site:
Boring / drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart / bore log, including hore & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, beyind 90 metre & up to 150 metre depth below ground level.
All types of soil:
300 mm diameter (2 x 150 meters = 300 meters total length)
300
-
-
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine / medium / coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
11.78
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410, mild steel, screwed and socketed / plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacturer, including required hire & labour charges, fittings and accessories, all complete, for all depths, as per direction of Engineer-in-charge.
200 mm nominal size dia having minimum wall thickness 5.40 mm (2 x 130 meters = 260 meters)
260
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410, plain slotted (having slot size of 1.6 / 3.2 mm), mild steel, threaded and socketed / plain bevel ended casing pipe (Type A) of required dia, conforming to IS: 8110, of reputed & approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacturer, including required hire & labour charges, fittings and accessories, all complete, for all depths, as per direction of Engineer-in-charge.
200 mm nominal size dia (2 x 20 metres = 40 meters total length)
40
-
-
... More
Development of tube well in accordance with IS: 2800 (part 1) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressore, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, including disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
(2 x 8 hours = 16 hours total for 2 tube wells)
16
-
-
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing / casing pipe, removable as per requirement, all complete for borewell of 200 mm clamp
2
-
-
... More
Providing and fixing M.S. Clamp of required diameter to the top of casing / housing ppe of tube well as per IS: 2800 (part 1), including necessary bolts & nuts of required size complete. - 200 mm clamp
2
-
-
... More
Providing and fixing Bail plug / Bottom Plug of required dia to the bottom of pipe assembly of tubewell as per IS: 2800 (part 1): 200 mm clamp
2
-
-
... More
Submersible Bore Well Pump of Capacity: 100 M³/Hr having Head: 123 Mtrs. with Control Panel, Cables, etc: Supplying Electric motor driven Submersible Bore Well Pump Set for bore of 250 mm. dia. or more conforming to IS: 8034-1981 with wet type motor set conforming to IS: 9164-1981 of capacity about 60 H.P., 2900 RPM operating on 3 phase, 400/440 Volts, 50 Hz, AC Supply, of discharge capacity 100 Cu. Mtr. / Hour at 123 meter head, having 7 Stages with 125 mm diameter Heavy Duty UPVC Column Pipe, Control cum Starter Panel (ATS) made from 16 G. CRCA sheet duly painted with epoxy power paint inside and outside with hinged doors and locking arrangement, consisting, of suitable switch of AC 23 duty with HRC fuses (Cat.III), starting and running contactors, overload relay, Automatic water level controller, Electronic timer with master timer CT operated Ammeter with selector switch, Voltmeter with selector switch, phase indicating lamps, single phasing preventer , water level guard, over load, start, run and stop push buttons, air cooled auto transformer with 60%, 70%, 80% tapping, Panel to be erected on angle iron frame grouted on wall as directed., contactors relays, timer, Accessories, Valves etc complete.
2
-
-
... More
Supplying of following size of HEAVY UPVC column pipe with coupler and wire lock [D] 80 mm dia
200
-
-
... More
Supply of following size of TOP & BOTTOM accessories i.e. Adaptor set (CI) long, pump guard set, starter pipe Rubber ring for submersible pump & UPVC column pipe as directed by Engineer - in - charge with necessary plumbing as desired. [F] 80 mm dia
4
-
-
... More
Supplying & erecting ISI Marked G.l. Union for pipe connections suitable for (F) 80 mm(3")
70
-
-
... More
Supplying and erecting ISI marked sluice valve at position with necessary material for following size of pipe diameter. (F) 80 mm (3")
2
-
-
... More
Supplying, & erecting C.I. swing, check type non-return (Reflux) Valve -ISI marked suitable for following size (C) 80 mm dia.
2
-
-
... More
Providing, fixing, testing and commissioning C.I. body, Motorised Butterfly valve (PN10 rating) with quarter turn, on/off electric actuator, SG Iron disc with EPDM/Nitrile seat, wafer type,with panel, IP-67 water tight alluminium enclosure with postion indicator working on operated by float type level controller and manually, VOLTAGE 220V AC. Size: 65mm dia.
5
-
-
... More
Providing, fixing, testing and commissioning C.I. body, Motorised Butterfly valve (PN10 rating) with quarter turn, on/off electric actuator, SG Iron disc with EPDM/Nitrile seat, wafer type,with panel, IP-67 water tight alluminium enclosure with postion indicator working on operated by float type level controller and manually, VOLTAGE 220V AC. Size: 50mm dia.
4
-
-
... More
Providing and laying in position ISI Marked (Embossed) 100mm diameter of Heavy duty “C” Class G.I . pipes as per IS: 1239, including fittings, threading the joints, fixing the joints with Teflon tapes, testing of the laid pipes as per standards, and laying underground including one coat of anticorrosive primer and wrapping material of 4mm thick & 150 mm width protection coating as per IS:10221 by thermo fusion process,overlap shall be maintained at 15mm as per specifications complete, and as approved and directed by Engineer-in-charge. (Excavation and backfilling excluded and extra as per relevant items)
112
-
-
... More
Providing and laying in position ISI Marked (Embossed) 80mm diameter of Heavy duty “C” Class G.I . pipes as per IS: 1239, including fittings, threading the joints, fixing the joints with Teflon tapes, testing of the laid pipes as per standards, and laying underground including one coat of anticorrosive primer and wrapping material of 4mm thick & 150 mm width protection coating as per IS:10221 by thermo fusion process,overlap shall be maintained at 15mm as per specifications complete, and as approved and directed by Engineer-in-charge. (Excavation and backfilling excluded and extra as per relevant items)
198
-
-
... More
Providing and laying in position ISI Marked (Embossed) 65mm diameter of Heavy duty “C” Class G.I . pipes as per IS: 1239, including fittings, threading the joints, fixing the joints with Teflon tapes, testing of the laid pipes as per standards, and laying underground including one coat of anticorrosive primer and wrapping material of 4mm thick & 150 mm width protection coating as per IS:10221 by thermo fusion process,overlap shall be maintained at 15mm as per specifications complete, and as approved and directed by Engineer-in-charge. (Excavation and backfilling excluded and extra as per relevant items)
693
-
-
... More
Providing and laying in position ISI Marked (Embossed) 50mm diameter of Heavy duty “C” Class G.I . pipes as per IS: 1239, including fittings, threading the joints, fixing the joints with Teflon tapes, testing of the laid pipes as per standards, and laying underground including one coat of anticorrosive primer and wrapping material of 4mm thick & 150 mm width protection coating as per IS:10221 by thermo fusion process,overlap shall be maintained at 15mm as per specifications complete, and as approved and directed by Engineer-in-charge. (Excavation and backfilling excluded and extra as per relevant items)
619
-
-
... More
Providing and fixing to wall and ceiling ISI Marked (Embossed) 65mm diameter of Medium Duty 'B' Class G.I. pipes as per IS: 1239, complete with cutting, threading, all fittings such as unions, bends, tees, etc, Teflon tape over threaded joints, Hilti anchor fasteners, G.I. threaded rods, double sided G.I. clamps, etc. including making good the wall and ceiling complete as directed by the Engineer-in-charge.
8
-
-
... More
Providing and fixing to wall and ceiling ISI Marked (Embossed) 80mm diameter of Medium Duty 'B' Class G.I. pipes as per IS: 1239, complete with cutting, threading, all fittings such as unions, bends, tees, etc, Teflon tape over threaded joints, Hilti anchor fasteners, G.I. threaded rods, double sided G.I. clamps, etc. including making good the wall and ceiling complete as directed by the Engineer-in-charge.
40
-
-
... More
Providing and fixing to wall and ceiling ISI Marked (Embossed) 100mm diameter of Medium Duty 'B' Class G.I. pipes as per IS: 1239, complete with cutting, threading, all fittings such as unions, bends, tees, etc, Teflon tape over threaded joints, Hilti anchor fasteners, G.I. threaded rods, double sided G.I. clamps, etc. including making good the wall and ceiling complete as directed by the Engineer-in-charge.
25
-
-
... More
Providing and fixing Gun metal gate valve with C.I. wheel of approved quality (screwed end). (a) 20mm dia nominal bore.
1
-
-
... More
Providing and fixing Gun metal gate valve with C.I. wheel of approved quality (screwed end). (b) 25mm dia nominal bore.
1
-
-
... More
Providing and fixing Gun metal gate valve with C.I. wheel of approved quality (screwed end). (c) 32mm dia nominal bore.
6
-
-
... More
Providing and fixing Gun metal gate valve with C.I. wheel of approved quality (screwed end). (d) 40mm dia nominal bore.
4
-
-
... More
Providing and fixing Gun metal gate valve with C.I. wheel of approved quality (screwed end). (e) 50mm dia nominal bore.
6
-
-
... More
Providing and fixing Gun metal gate valve with C.I. wheel of approved quality (screwed end). (f) 65mm dia nominal bore.
3
-
-
... More
Providing and fixing Gun metal gate valve with C.I. wheel of approved quality (screwed end). (f) 80mm dia nominal bore.
1
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank as per IS: 12701, marked with cover and suitable locking arrangement and making necessary holes for inlet, oultet, and overflow pipes but without fittings and the base support for tank. (Each tank of 5000 liters capacity)
70000
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank as per IS: 12701, marked with cover and suitable locking arrangement and making necessary holes for inlet, oultet, and overflow pipes but without fittings and the base support for tank. (Each tank of 2500 liters capacity)
5000
-
-
... More
Providing and fixing full thread coupling on each tank for inlet and outlet connections of G.I. (medium duty) as per IS: 1239, including drilling holes in the tanks at required levels, inserting the coupling in place, sealing the hole with silicon sealant, attaching the hex nuts on either side of the coupling as directed and approved by the Engineer-in-charge. (A) 65mm diameter
4
-
-
... More
Providing and fixing full thread G.I. Tank Nipple (medium duty) as per IS: 1239, including drilling holes in the tanks at required levels, inserting the coupling in place, sealing the hole with silicon sealant, attaching the hex nuts on either side of the coupling as directed and approved by the Engineer-in-charge. (A) 50mm diameter
8
-
-
... More
Providing and fixing Polyethylene - Aluminum - Polyethylene (PE-AL-PE) composite pressure pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers, & connectors etc. with clamps at 1.00 meter spacing. This includes testing of joints complete as per direction of the Engieer-in-charge. Internal Work - Exposed on wall - 18.1.1 - 1216 (16mm OD) pipe
56
-
-
... More
Providing and fixing Polyethylene - Aluminum - Polyethylene (PE-AL-PE) composite pressure pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers, & connectors etc. with clamps at 1.00 meter spacing. This includes testing of joints complete as per direction of the Engieer-in-charge. Internal Work - Exposed on wall - 18.1.2 - 1620 (20mm OD) pipe
14
-
-
... More
Providing and fixing Polyethylene - Aluminum - Polyethylene (PE-AL-PE) composite pressure pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers, & connectors etc. with clamps at 1.00 meter spacing. This includes testing of joints complete as per direction of the Engieer-in-charge. Internal Work - Exposed on wall - 18.1.3 - 2025 (25mm OD) pipe
33
-
-
... More
Providing and fixing Polyethylene - Aluminum - Polyethylene (PE-AL-PE) composite pressure pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers, & connectors etc. with clamps at 1.00 meter spacing. This includes testing of joints complete as per direction of the Engieer-in-charge. Internal Work - Exposed on wall - 18.1.4 - 2532 (32mm OD) pipe
24
-
-
... More
Providing and fixing Polyethylene - Aluminum - Polyethylene (PE-AL-PE) composite pressure pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers, & connectors etc. with clamps at 1.00 meter spacing. This includes testing of joints complete as per direction of the Engieer-in-charge. Internal Work - Exposed on wall - 18.1.5 - 3240 (40mm OD) pipe
5
-
-
... More
Providing and fixing Polyethylene - Aluminum - Polyethylene (PE-AL-PE) composite pressure pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers, & connectors etc. with clamps at 1.00 meter spacing. This includes testing of joints complete as per direction of the Engieer-in-charge. Internal Work - Exposed on wall - 18.1.6 - 4050 (50mm OD) pipe
40
-
-
... More
Providing and fixing Polyethylene - Aluminum - Polyethylene (PE-AL-PE) composite pressure pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers, & connectors etc. with clamps at 1.00 meter spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the Engieer-in-charge. Concealed Work, including cutting chases and making good the wall etc. - 18.2.1 - 1216 (16mm OD) pipe
30
-
-
... More
Providing and fixing Polyethylene - Aluminum - Polyethylene (PE-AL-PE) composite pressure pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers, & connectors etc. with clamps at 1.00 meter spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the Engieer-in-charge. Concealed Work, including cutting chases and making good the wall etc. - 18.2.2 - 1620 (20mm OD) pipe
43
-
-
... More
Providing and fixing Polyethylene - Aluminum - Polyethylene (PE-AL-PE) composite pressure pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers, & connectors etc. with clamps at 1.00 meter spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the Engieer-in-charge. Concealed Work, including cutting chases and making good the wall etc. - 18.2.3 - 2025 (25mm OD) pipe
12
-
-
... More
Providing and fixing Polyethylene - Aluminum - Polyethylene (PE-AL-PE) composite pressure pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers, & connectors etc. with clamps at 1.00 meter spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the Engieer-in-charge. Concealed Work, including cutting chases and making good the wall etc. - 18.2.4 - 2532 (32mm OD) pipe
4
-
-
... More
Providing and fixing chlorinated polyvinyl chloride (CPVC) Ball valves with S.S. 304 ball valve, having pressure bearing capacity up to 7.0 kg/cm² at 82°C, of the following sizes including cutting the pipes, solvent welding, complete as per the manufacturers standards and the direction of the Engineer-in-charge. Make: Astral / Supreme / Ashirvad. a) 20 mm nominal bore
8
-
-
... More
Providing and fixing chlorinated polyvinyl chloride (CPVC) Ball valves with S.S. 304 ball valve, having pressure bearing capacity up to 7.0 kg/cm² at 82°C, of the following sizes including cutting the pipes, solvent welding, complete as per the manufacturers standards and the direction of the Engineer-in-charge. Make: Astral / Supreme / Ashirvad. b) 25 mm nominal bore
5
-
-
... More
Providing and fixing chlorinated polyvinyl chloride (CPVC) Ball valves with S.S. 304 ball valve, having pressure bearing capacity up to 7.0 kg/cm² at 82°C, of the following sizes including cutting the pipes, solvent welding, complete as per the manufacturers standards and the direction of the Engineer-in-charge. Make: Astral / Supreme / Ashirvad. c) 32 mm nominal bore
2
-
-
... More
Providing & fixing of Nitrile rubber closed cell (Thermo plastic elastomeric) insulation of the following diameter and thickness over hot water pipes and fittings, of minimum 45 kg / M³ density and haivng thermal conductivity 0.037W/MK or better at 20°C mean temperature, class 'O' insulation applied by suitable adhesive complete as per manufacturers specifications (for internal and external hot water supply) all complete as per directions of the Engineer-In-Charge. Rate includes cost of all materials including fixing the insulation with the pipes with tapes or adhesives, labour charges for working at all levels. leads and heights. a) For 15mm & 20mm dia pipes - 19mm x 22mm Nitrile Rubber Plain Tubing
9
-
-
... More
Providing & fixing of Nitrile rubber closed cell (Thermo plastic elastomeric) insulation of the following diameter and thickness over hot water pipes and fittings, of minimum 45 kg / M³ density and haivng thermal conductivity 0.037W/MK or better at 20°C mean temperature, class 'O' insulation applied by suitable adhesive complete as per manufacturers specifications (for internal and external hot water supply) all complete as per directions of the Engineer-In-Charge. Rate includes cost of all materials including fixing the insulation with the pipes with tapes or adhesives, labour charges for working at all levels. leads and heights. b) For 25mm dia pipes - 19mm x 28mm Nitrile Rubber Plain Tubing
9
-
-
... More
Providing & fixing of Nitrile rubber closed cell (Thermo plastic elastomeric) insulation of the following diameter and thickness over hot water pipes and fittings, of minimum 45 kg / M³ density and haivng thermal conductivity 0.037W/MK or better at 20°C mean temperature, class 'O' insulation applied by suitable adhesive complete as per manufacturers specifications (for internal and external hot water supply) all complete as per directions of the Engineer-In-Charge. Rate includes cost of all materials including fixing the insulation with the pipes with tapes or adhesives, labour charges for working at all levels. leads and heights. c) For 32mm dia pipes - 25mm x 35mm Nitrile Rubber Plain Tubing
9
-
-
... More
Providing & fixing of Nitrile rubber closed cell (Thermo plastic elastomeric) insulation of the following diameter and thickness over hot water pipes and fittings, of minimum 45 kg / M³ density and haivng thermal conductivity 0.037W/MK or better at 20°C mean temperature, class 'O' insulation applied by suitable adhesive complete as per manufacturers specifications (for internal and external hot water supply) all complete as per directions of the Engineer-In-Charge. Rate includes cost of all materials including fixing the insulation with the pipes with tapes or adhesives, labour charges for working at all levels. leads and heights. d) For 40mm dia pipes - 25mm x 42mm Nitrile Rubber Plain Tubing
9
-
-
... More
Providing & fixing of Nitrile rubber closed cell (Thermo plastic elastomeric) insulation of the following diameter and thickness over hot water pipes and fittings, of minimum 45 kg / M³ density and haivng thermal conductivity 0.037W/MK or better at 20°C mean temperature, class 'O' insulation applied by suitable adhesive complete as per manufacturers specifications (for internal and external hot water supply) all complete as per directions of the Engineer-In-Charge. Rate includes cost of all materials including fixing the insulation with the pipes with tapes or adhesives, labour charges for working at all levels. leads and heights. e) For 50mm dia pipes - 25mm x 54mm Nitrile Rubber Plain Tubing
9
-
-
... More
Providing & fixing of Nitrile rubber closed cell (Thermo plastic elastomeric) insulation of the following diameter and thickness over hot water pipes and fittings, of minimum 45 kg / M³ density and haivng thermal conductivity 0.037W/MK or better at 20°C mean temperature, class 'O' insulation applied by suitable adhesive complete as per manufacturers specifications (for internal and external hot water supply) all complete as per directions of the Engineer-In-Charge. Rate includes cost of all materials including fixing the insulation with the pipes with tapes or adhesives, labour charges for working at all levels. leads and heights. f) For 65mm dia pipes - 25mm x 76mm Nitrile Rubber Plain Tubing
4
-
-
... More
Sec.2.0 Sanitary Installations
Providing and fixing white vitreous china extended wall mounting water closet of size 790 x 370 x 690mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre / 6 litre (adjustable to 4 litre / 8 litre) including seat cover, and cistern fittings ,nuts, bolts, and gaslets etc complete.
6
-
-
... More
Providing and fixing UPVC SWR WC Connector 130 x 110 mm dia. Socket type of approved make, fixed to outlet gaskets with UPVC Lubricant or Solvent Cement, all complete as per directions of the Engineer-in-charge. Make: Astral; Model No. F172005909 or Equivalent.
6
-
-
... More
Providing and Fixing Vitreous china Under Counter Wash Basin as per IS: 2556 (Part 4) of size 640 x 450mm, in white colour of approved make and quality. All junctions shall be sealed with silicon sealant. Rate shall include 32 mm dia CP brass waste coupling, 32 mm dia CP cast brass bottle trap, union & extension piece of required length and CP wall flange complete including cutting & making good the walls where required and as directed by the Engineer-in-charge.
8
-
-
... More
Providing and fixing Urinal or approved quality including conecting the Urinal with waste pipe , tap etc. complete.(A) White earthenware flat back or corner type size 430mm x 260mm x 350mm.
4
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: 17.7.2 White Vitreous China Wash Basin size 630x450 mm with a single 15mm C.P. brass pillar tap
2
-
-
... More
Providing and fixing white vitreous china sink for Sluice Room & Autopsy Room, with C.I. brackets, 40 mm PTMT waste coupling, 40mm PTMT bottle trap, complete, including painting of fittings and brackets, cutting and making good the wall wherever required as directed by Engineer. Sink for Sluice Rooms. Sink: Make: Cera – CATER 600 x 400 x 250 mm (660 x 460 x 250 mm including rim) Cat. No. S6010103; PTMT Waste Coupling - PolyTUF - 38/40 mm - 1003 (b); PTMT Bottle Trap - PolyTUF - 40mm - 1060.
4
-
-
... More
Providing and fixing recessed type ceramic soap dish of size 150mm x 150mm, including chasing in the wall, setting the soap dish in white cement in the location and at levels as directed by the Engineer-in-charge.
6
-
-
... More
Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required. 17.10.2 - Kitchen Sink without drain board: Size: 610 x 510 mm bowl depth 200 mm.
4
-
-
... More
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. 17.69.2: Waste coupling 38mm dia of 83mm length and 77mm breadth, weighing not less than 60 gms.
4
-
-
... More
Providing and fixing PTMT Bottle Trap for wash basin and sink, of approved quality and colour. 17.70.2: Bottle trap 38mm dia single piece moulded with height of 270mm, effective length of tail pipe 260mm from the center of the waste coupling, 77mm breadth with 25mm minimum water seal, weighing not less than 263 gms.
4
-
-
... More
Providing and fixing 8mm dia C.P. / S.S. jet with flexible tube up to 1 meter long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer-in-charge.
6
-
-
... More
Providing and Fixing 15 mm dia. Wall mounted type CP brass pressmatic bib cock with Auto Closing System with Built-in Control Cock With Wall Flange complete, making all necessary connections etc. All complete as per directions of the Engineer-in-charge. i) 15mm dia.
10
-
-
... More
Providing and Fixing 15 mm dia. CP brass extended lever handle pillar cock with ceramic disc cartridge for all laboratory sinks or as directed by the Engineer-in-charge, complete, making all necessary connections etc of approved make.
4
-
-
... More
Providing and fixing of 15mm nominal bore CP Brass Angle valve confirming to IS: 8931, for wash basins, water coolers, geyser points, etc of approved quality and as approved by and directed by the Engineer-in-charge.
46
-
-
... More
Providing and Fixing 15 mm dia. CP brass two way bib cock with wall flange and ceramic disc cartridge complete, making all necessary connections etc. All complete as per directions of the Engineer-in-charge. i) 15mm dia.
5
-
-
... More
Providing and fixing ABS Chrome plated Brass Hand Shower (Health Faucet) of approved make and quality and as approved by Engineer - In - Charge, including 8 mm dia, 1 Meter long Flexible tube & wall hook including cutting and making good the walls wherever required complete as per directions of the Engineer-in-charge.
8
-
-
... More
Providing and Fixing in position CP brass Pressmatic Urinal Flush Valve Auto-closing system with built in Control Cock and Wall flange of approved or equivalent make, including 15mm S.S. pipe connection with Urinal, and including all necessary materials required for fixing. All complete as per directions of the Engineer-in-charge.
4
-
-
... More
Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.
4
-
-
... More
Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 100mm dia. Each
2
-
-
... More
Providing and fixing C.P. brass Shower arm for over head shower of approved make and quality, and as approved by the Engineer-in-charge, and conforming to Manufacturers Standards. a) Size: Casted 190mm long light body round shape for wall mounted
shower rose with flange, of approved make and as per the direction of the Engineer-in-charge.
2
-
-
... More
Providing and fixing C.P. brass Wall Mixer with provision For overhead shower with 115mm Long Bend pipe on upper side, connecting legs & wall flanges, complete as per approved make and as directed by the Engineer-in-charge.
2
-
-
... More
Providing & fixing C.P. Bath Spout with all nuts, washer complete as per of approved Quality and conforming to Manufacturers Standards. Work to be completed to the satisfaction of the Engineer-In-Charge. Make: Jaquar-FLR-SPJ-CHR-5429G or Equivalent of the same make.
2
-
-
... More
Providing and fixing Heavy class SS grating of grade SS 304 of approved make and quality, and as approved by the Engineer-in-charge, weighing not less than 150 gms. including setting in floor with white cement to match with floor finish as per requirement complete as per directions of Engineer-in-Charge.
I) Type 1 - Size 129mm x 129mm Square Matt finish with Cockroach trap consisting of 100mm x 100mm perforated top cover, 77mm Ø x 67mm high Cockroach Trap ideal for 100mm drain pipe. Make: Chilly; Model No. CCT-S-129 or Equivalent.
5
-
-
... More
Providing and fixing Heavy class SS grating of grade SS 304 of approved make and quality, and as approved by the Engineer-in-charge, weighing not less than 150 gms. including setting in floor with white cement to match with floor finish as per requirement complete as per directions of Engineer-in-Charge.
II) Type 2 - Size 140mm x 140mm Square Matt finish with solid cover, with 77mm Ø x 70mm high Cockroach Trap ideal for 100mm drain pipe for urinal traps. Make: Chilly; Model No. CCTL-S-140 or Equivalent.
2
-
-
... More
Providing and fixing SS Floor Cleanout (FCO) plug of approved brand and with SS Square Frame/ Round Frame with Flat Round Cover with Rubber Seal & SS Screw jointing as per manufacturer recommendation or per approval of the Engineer-in-charge.
ii) 128mm x 128mm Square Top for 100 mm dia pipe. Make:Chilly; Model No. COS 05 or Similar or Equivalent Make.
5
-
-
... More
Providing and fixing U.P.V.C (Type B) conforming to IS 13592, & fittings conforming to IS 14735 of approved make Multi Floor Trap Height Riser with 50mm x 50mm x 75mm inlet x 110mm dia outlet, as per specifications & at all levels & at all heights, as approved and directed by Enigeer-in-charge.
7
-
-
... More
Providing, laying and jointing in true line and level 160 mm diametre U.P.V.C (Type B) conforming to IS 13592 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.
15
-
-
... More
Providing, laying and jointing in true line and level 110 mm diametre U.P.V.C (Type B) conforming to IS 13592 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.
10
-
-
... More
Providing, laying and jointing in true line and level 50mm diametre U.P.V.C (Type B) conforming to IS 13592 with one end plain and other end socketed with rubber ring, & fittings conforming to IS 14735 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. Pipe length per piece: 1.8 Mtrs
10
-
-
... More
Providing, laying and jointing in true line and level 40mm diametre U.P.V.C (Type B) conforming to IS 13592 with one end plain and other end socketed with rubber ring, & fittings conforming to IS 14735 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.
5
-
-
... More
Providing and fixing unplasticized PVC SWR as per IS: 13592 (Type B), P - Trap as approved and directed by the Engineer-in-charge. For 110 mm Dia pipe
5
-
-
... More
Providing and fixing unplasticized PVC SWR as per IS: 13592 (Type B), vent cowl as approved and directed by the Engineer-in-charge. For 110 mm Dia pipe
5
-
-
... More
Providing and fixing unplasticized PVC SWR as per IS: 13592 (Type B), vent cowl as approved and directed by the Engineer-in-charge. For 160 mm Dia pipe
5
-
-
... More
Providing, laying and jointing in true line and level 150 diametre U.P.V.C (Type A) conforming to IS 13592 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.
35
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised-PVC rain water pipes conforming to IS : 13592 (Type A), including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe Bend - 150mm dia pipe
7
-
-
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes at an average distance of 1.2 meters centre to centre, by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
28
-
-
... More
Providing and fixing PTMT grating of approved quality and colour: Rectangular type with openable circular lid: 150 mm nimnal size square 100 mm diameter of the inner hinged round grating.
7
-
-
... More
Sec.3.0 SEWAGE
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design: 19.15.1 - With 20x20 mm square bar
287
-
-
... More
Supplying and fixing reinforced concrete heavy duty nonpressure pipes with collars for culverts carrying heavy traffic as per IS 458-1991 specifications including setting the pipes in C.M. 1:2 watering and laying (to level or slopes) of class NP4 (casted by vertically vibrated technology) of following internal daimeters.(i) 300mm dia. (upto 10 ton)
215
-
-
... More
Supplying and fixing reinforced concrete heavy duty nonpressure pipes with collars for culverts carrying heavy traffic as per IS 458-1991 specifications including setting the pipes in C.M. 1:2 watering and laying (to level or slopes) of class NP4 (casted by vertically vibrated technology) of following internal daimeters.(ii) 450mm dia. (upto 10 ton)
249
-
-
... More
Supplying and fixing reinforced concrete heavy duty nonpressure pipes with collars for culverts carrying heavy traffic as per IS 458-1991 specifications including setting the pipes in C.M. 1:2 watering and laying (to level or slopes) of class NP4 (casted by vertically vibrated technology) of following internal daimeters.(iii) 600mm dia. (upto 10 ton)
282
-
-
... More
Sec.4.0 DRAINAGE
Providing and laying lime concrete 1:2:4 (1-Lime putty :2-Fine sand : 4-Graded brick aggregates 40mm nominal size) bedding for stoneware pipes of following internal diameters with necessary formwork and curing complete.(B) 150mm dia. 450mm width (166mm Ave. bed thickness)
5
-
-
... More
Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.(B) 150mm (upto 10 ton)
164
-
-
... More
Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm and painting with two coats of Anti-corrosive paint etc. complete.
287
-
-
... More
Supplying and fixing reinforced concrete heavy duty nonpressure pipes with collars for culverts carrying heavy traffic as per IS 458-1991 specifications including setting the pipes in C.M. 1:2 watering and laying (to level or slopes) of class NP4 (casted by vertically vibrated technology) of following internal daimeters.(i) 300mm dia. (upto 10 ton)
262
-
-
... More
Supplying and fixing reinforced concrete heavy duty nonpressure pipes with collars for culverts carrying heavy traffic as per IS 458-1991 specifications including setting the pipes in C.M. 1:2 watering and laying (to level or slopes) of class NP4 (casted by vertically vibrated technology) of following internal daimeters.(ii) 450mm dia. (upto 10 ton)
542
-
-
... More
Percolation Wells: 11 numbers (in site)
Boring / drilling bore well of required diameter for casing / strainer pipe, by suitable method prescribed in IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart / bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per the direction of Engineer-in-charge, up to 90 meter depth below ground level.
All types of Soil.
300 mm Dia
990
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per the direction of Engineer-in-charge. 200 mm nominal size diameter
990
-
-
... More
Supplying, filling, spreading & levelling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per the direction of Engineer-in-charge.
17.27
-
-
... More
Supplying, filling, spreading & levelling gravels of size range 5 cm to 10 cm, in recharge pit, over the existing layer of boulders, in the required thickness, for all leads & lifts, all complete as per the direction of Engineer-in-charge.
17.27
-
-
... More
Supplying, filling, spreading & levelling coarse sand of size range 1.5 mm to 2 mm, in recharge pit, over gravel layer, in the required thickness, for all leads & lifts, all complete as per the direction of Engineer-in-charge.
17.27
-
-
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine / medium / coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
38.86
-
-
... More
Providing and fixing factory made precast RCC perforated drain covers, havng concrete of strength not less than M-25, of size 1000 x 450 x 50 mm, reinforced with 8 mm Dia four numbers of logitudinal & 9 numbers cross sectional T.M.T. hoop bars, including providing 50 mm diameter perforations @ 100 to 125 mm centre to centre, including providing edge bridging with M.S. flats of size 50 mm x 1.6 mm complete, all as per the direction of Engineer-in-charge.
22
-
-
... More
Sec.5.0 MECHANICALS
Hydro-pneumatic System - for Phase 01:
Supply, Installation, Testing And Commissioning Of Compact Self Contained Skid Mounted Hydropneumatic System as follows: Design, engineer, procure, supply, test and commission a pre-engineered, factory fabricated, assembled & tested, fully integrated, highly efficient pump, IE2 motors, skid mounted, complete ready-to-connect packaged variable speed water pressure booster station. The packaged variable speed water pressure booster station shall be complete with vertical multi stage centrifugal pumps connected in parallel, high efficiency IE 2 motors, an air-cooled external variable frequency drive, intelligent multi-pump controller, the controller shall be mounted in a control cabinet with an IP 41 enclosure of suitable rating having Potential free contacts to monitor On/Off & Trip status with necessary sensors/switches; hot Dipped Galvanised suction and delivery manifolds; isolation ball valves on suction and discharge of each pump; non return valve on discharge side of each pump; hot dip galvanised common base frame; and diaphragm pressure vessel. Complete (Skid mounted / wall mounted / floor mounted) electrical control panel comprising of all accessories such as PLCs, pressure switches, pressure transducers, control wiring and any other necessary imports etc. (list to be provided by the vendor). All installations such as electrical wiring from Electrical Panel to Pump panel, civil foundations, etc is included in this scope. Set of accessories such as NRVs, isolating valves, Hot dip Galvanized Iron suction and delivery header, pressure gauge, GI base frame, pressure switches, pressure transducers, inter connecting power and control cabling etc. complete.
For Soft Water: Soft Water Supply - Set consisting of 4 pumps (3 working + 1 standby); Flow Rate (Each pump): 250 LPM; Flow Rate (System): 1000 LPM (60 Cu. Mtr / Hr); Pressure Vessel = 1 x 200 Ltrs; Head (each pump): 55 Mtrs.
1
-
-
... More
Hydro-pneumatic System - for Phase 01:
Supply, Installation, Testing And Commissioning Of Compact Self Contained Skid Mounted Hydropneumatic System as follows: Design, engineer, procure, supply, test and commission a pre-engineered, factory fabricated, assembled & tested, fully integrated, highly efficient pump, IE2 motors, skid mounted, complete ready-to-connect packaged variable speed water pressure booster station. The packaged variable speed water pressure booster station shall be complete with vertical multi stage centrifugal pumps connected in parallel, high efficiency IE 2 motors, an air-cooled external variable frequency drive, intelligent multi-pump controller, the controller shall be mounted in a control cabinet with an IP 41 enclosure of suitable rating having Potential free contacts to monitor On/Off & Trip status with necessary sensors/switches; hot Dipped Galvanised suction and delivery manifolds; isolation ball valves on suction and discharge of each pump; non return valve on discharge side of each pump; hot dip galvanised common base frame; and diaphragm pressure vessel. Complete (Skid mounted / wall mounted / floor mounted) electrical control panel comprising of all accessories such as PLCs, pressure switches, pressure transducers, control wiring and any other necessary imports etc. (list to be provided by the vendor). All installations such as electrical wiring from Electrical Panel to Pump panel, civil foundations, etc is included in this scope. Set of accessories such as NRVs, isolating valves, Hot dip Galvanized Iron suction and delivery header, pressure gauge, GI base frame, pressure switches, pressure transducers, inter connecting power and control cabling etc. complete.
For Recycled Water: Recycled Water Supply - Set consisting of 3 pumps (2 working + 1 standby); Flow Rate (Each pump): 250 LPM; Flow Rate (System): 750 LPM (45 Cu. Mtr / Hr); Pressure Vessel = 1 x 200 Ltrs; Head (each pump): 65 Mtrs.
1
-
-
... More
Water Treatment Plant: Supply, Installation, Testing and Commissioning of water treatment plant having Ultra-filters, Micro-cartridge filters, Resin Treament, Anti-scalant treatment, or any of these in a combination to provide scaling free water to all buildings within the campus, including centrifugal multistage water pump (1 working + 1 standby), connected plumbing work, control panel for auto cutoff, auto on, auto regeneration, auto rinse and auto filter mode (1 working + 1 standby) with IP55 protection with all necessary equipment, piping and connected activities as per specification and operating conditions as mentioned by manufacturer or as directed by engineer in charge. System Capacity: 200,000 litres per day.
2
-
-
... More
Hot Water Plant: Supplying, installing, testing and commissioning of Electrically Operated Air-to-Water Heat Pump Hot Water System capable of heat output of minimum 20Kw @ COP OF MIN 3.6 producing Hot water up to 55°C, at ambient temperature of 12°C to 55°C. Heat pump should have an IPX4 compatible control panel, designed and built in manufacturer's factory and compliant to norms for the same and compatible to support 8 units in parallel. Inbuilt 4 Ways valve for auto defrost function. The heat pump shall have an operational noise level of less than or equal to 65 dB(A). Model should be with tube in tube type heat exchanger Comprising of helical rotary twin compressors with direct drive motor (the compressor speed shall not exceed 3000 RPM) with shell and tube type plain tube chiller as well as shell & insulated tube type integrally finned condenser, at working efficiency of minimum 80%, having heating capacity up to 60 degree centigrade, capable to withstand up to 300 ppm water hardness. The heat pump package shall include vibration mountings, copper refrigerant piping as per the latest applicable B.I.S. codes and standards, full refrigerant charge using CFC free gas, system control wiring and accessories, installed on a fabricated mild steel base frame assembled to form a compact assembly, complete with micro-processor based control panel comprising of adaptive controls, indication lights, Star-Delta starters, over-load and under-load protection, TPN isolator for termination of incoming power cable, necessary control wiring, disconnect switch, grooved (Victaulic couplings at inlet and outlet of both heat exchangers, DP switches for both heat exchangers, vibration isolation arrangements electrical panel with starter for Heat Pumps, testing of all systems post installation at Minimum Wet Bulb Temperature of 17.7 degree Celsius in January to deliver hot water at 55 degree Celsius. The scope also includes commissioning of the entire system, commissioning certificate in the name of the Engineer-in-charge, etc. complete as per manufacturing standards and to the complete satisfaction of the Engineer-in-charge. The scope includes pre-insulated S.S. storage tanks or M.S. storage tanks with ceramic lining, of capacity as mentioned below, including making inlet, outlet heavy gauge C.P. connection, temperature guages (at inlet and outlet of storage tank). The Storage Tanks duly painted with two coats of Red-Oxide and having PUF / Rockwool insulation, outer cladding of 22 guage Aluminum Sheet, control valves at inlet and outlet of Water tank, M.S. supports for the tanks with M.S. base plate, bolts and nuts for fastening the stands and support to Cement concrete blocks, testing the tanks and the entire hot water system at a constant water pressure of 5.0 Bar (50 Mtrs) each, testing of the entire system for a constant flow of hot water at 55 degree Celcius during peak winter when the Wet Bulb Temperature is 17.7 degree Celcius. Make: A O Smith. FOR KITCHEN BLOCK: Total System Capacity: 30000 LPD; Heat Pump HWS: 7500 LPH (peak load) with 10,000 Ltr capacity storage tank. Heat Pump HWS: 1700 LPH (peak load) with 6,000 Ltr capacity storage tank. Heat pumps of 13.2 kW (output capacity - 38 KW), electrical starter panels, level sensors, temperature sensors, thermostat, temperature gauges, pressure gauge, interconnecting G.I. 'C' class pipes with nitrile rubber cladding and aluminium cladding, complete.
1
-
-
... More
R.O. Plants:
Supply, Installation, Testing and Commissioning of Reverse Osmosis water treatment plant having raw water feed pump, Chlorine Dosing System, Anti-scalant System, filters, Micro-cartridge filters, R.O. membranes, or any of these in a combination to provide scaling free water to all buildings within the campus, including centrifugal multistage water pump (1 working + 1 standby), connected plumbing work, control panel for auto cutoff, auto on, auto regeneration, auto rinse and auto filter mode (1 working + 1 standby) with IP55 protection with all necessary equipment, piping and connected activities as per specification and operating conditions as mentioned by manufacturer or as directed by engineer in charge. System Capacity: RO - 500 LPH (Permeate) ; Feed - 1.2 m3/hr @ 50% recovery
1
-
-
... More
WATER COOLERS:
Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity 150 Ltr.per hour @ an ambient temp of 450 C. The outlet temp. of the water should drop by 150C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating, coil, thermostats, relay etc.complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel.
2
-
-
... More
WATER COOLERS:
Conveyance charges including loading / unloading for Water Cooler from store to site (I) Local up to 10 Km
2
-
-
... More
LEVEL SENSORS:
Supplying & erecting approved make Automatic liquid level controller 6A.as per instruction of Engineer in charge on site complete with wiring connection with existing wires , with copper conductor from pump to upper and lower tank.
14
-
-
... More
Sewage & Effluent Treatment Plants:
Supply, installation, testing & commissioning of Sewage Treatment Plant MBR Type (Package Treatment Plant) of 200 kLD with collection tank, primary, secondary & tertiary treatment also with all electromechanical equipments, interconnected piping, valves, pumps, instruments, gauges, electrification like panel, starter, cabling, earthing, etc. complete. Effluent Treatment Plant (Package Treatment Plant) of 50 kLD with bar screen, pH corrction dosing system, aeration blowers, feed pumps, clarifiers, hypo dosing, coagulant dosing, flocculant dosing, sludge recirculation pumps, & tertiary treatment including multi-grade filter, activated carbon filter, softener, also with all electromechanical equipments, interconnected piping, valves, pumps, instruments, gauges, electrification like panel, starter, cabling, earthing, etc. complete. The sizing of tank/equipment shall take care of average as well as peak flow. The outlet parameters shall be as per specifications.(Including civil cost of Bar Screen Chamber) (Cost of civil works for tanks not included). The entire system shall be installed, all relevant approvals from local and other authorities to be procured, submitting of the reports, certificates, etc as per norms and requirements, training of staff, handing over all relevant documents, etc complete as directed and approved by the Engieer-in-charge.
1
-
-
... More
DRAINAGE SUMP PUMP:
Providing and fixing compact monoblock dry motor submersible pumps of suitable rating, with non-clog free flow open impeller, solid handling capacity of up to at least 30mm suitable for operation on 415 volts +10% , 3 Phase, 50Hz, A.C supply, speed 2900 RPM including oil chamber, guide wire for lifting & lowering of pump, M.S. galvanized lifting chain, duck foot bend complete. The pump sets shall be supplied with required accessories & as per specification with the following : (a) Water level sensing – switch type or hydraulic floats or pressure switch – with data accessible on IBMS platforms.
(a) Complete piping 80 mm dia common delivery up to 12 m in heavy Duty Class 'C' G.I. – 10 meters length.
(c) 80 mm dia Flap type Forged Brass Non-return valve. – 2 Nos. (d) 80mm dia Forged Brass Gate Valve. – 1 No.
(e) Necessary cables from pump set to control panel (10 meters) – 1 Set (f) Electrical control panel having all necessary accessories & safety devices of standard specifications and suitable for receiving supply cable to connections within, and outlet connections for starters, and earthing outlets, complete. All best standards, as per ECBC & IS Codes to be followed and provided. Starters to be operated on cascading operations, so as to maintain maximum life cycle of each pump. – 1 Set.
(g) Panels to have Modbus / BACnet connectivity, with pump performance data, pump fault data, On / Off operations, etc to be incorporated.
(h) Each set consist of 2 nos. of pumps - 1 working & 1 stand by. Discharge: 25 Cu. Mtr / Hr.
Head: 15 Meter (minimum).
2
-
-
... More
SEC03 -ELECTRICAL WORKS
ELW 02.00 HT PANEL
Supplying, Installtion,Testing & Commissioning of 1 no.630A HT VCB as incomer and 4 nos 400A HT VCB as outgoings .The panel should have tinned copper busbars and extensible type for future requirements. This should be complete with metering and protection and complete in all as per specification.
1
-
-
... More
ELW 03.00 Transformer & Stabilizer
Supplying, Installtion,Testing, Commissioning & unloading at site, shifting to the erection site assembling, leveling, grouting, installing, field testing and commissioning of 1500KVA Dry type Transformer with off load tape chagner.Complete in all respect as per specification.
1
-
-
... More
Supplying, Installtion,Testing, Commissioning & unloading at site, shifting to the erection site assembling, leveling, grouting, installing, field testing and commissioning of 1500KVA Dry type Transformer with on load tape chagner with OLTC and RTCC. Scope also includes connection between OLTC and RTCC. Complete in all respect as per specification.
2
-
-
... More
Supplying, Installtion,Testing, Commissioning & unloading at site, shifting to the erection site assembling, leveling, grouting, installing, field testing and commissioning of 1500KVA Stabilizer complete in all respect as per specification
3
-
-
... More
ELW 04:00 BUSDUCT & RISING MAINS & its accesories
Supplying, assembling, grouting in slab with hanging rods/ strips, water proof, dust proof, vermin proof company fabricated sanwich type busduct as per approved make list. All joints should be fitted with neoprene gasket. .The capacity of the busbar should be four pole & should be of tinned aluminium, with necessary flexible, bends, reducer, expansion joints, supports and all assential accessories complete in all respect. Necessary certificate shall be required at the time of supply.The capacity of neutral bus should be equal to phase bus.
3200A Four Pole BBT
180
-
-
... More
ELW 05.00 Substation Equipment and substaion Auxiliary
SITC of 11 KV, 3 core Al. 240 sqmm H.T. XLPE armoured unearth cable.
100
-
-
... More
SITC of H.T. cable indoor type end connection for 11 KV XLPE, 240 sq mm x 3 core cable with all accessories including lugs
7
-
-
... More
Suppplying & Erecting automatic emergency light with maintenance free battery for 2 X 18 watts CFL tube. With exide make battery
9
-
-
... More
Supplying & Erecting Rubber mat 1.1 KV grade ISI marked 1000 x 1000 x 6 mm size as per IS 5424.
50
-
-
... More
Supplying & Erecting Rubber mat 11 KV grade ISI marked 1000 x 1000 x 12 mm size as per IS 5424..
9
-
-
... More
Providing and erecting danger notice board for medium voltage installation to be erected as per I.S. The board should be 150 x 150 mm.
10
-
-
... More
Providing and erecting danger notice board for high voltage installation to be erected as per I.S.
3
-
-
... More
Providing and fixing printed instruction chart both in English & REGIONAL LANGUAGE & duly framed out on glass for treatment of person suffering from Electric shock.
7
-
-
... More
Providing pair of rubber hand gloves suitable for working on 11 KV/22 KV supply.
2
-
-
... More
Supplying and fixing Standard First aid box with all the Standard contents.
2
-
-
... More
Supplying and instaling FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and Red out side with FIRE mark, filled with dry-sand and kept on existing stand provided or hung on wall hook..
5
-
-
... More
Supplying & Erecting 1.5 mtr. (5') x 0.9 mtr. (3.1') x 0.6 mtr. (2.1') Floor mounted stand (For keeping 4 Nos.of buckets) made of 30 x 30 x 4 mm. angle iron welded with 4 hooks and duly painted with one coat of red lead & two coats of Approved enameled silver paints.
1
-
-
... More
Supply installation testing and commissionning of Wall hooks of 22 to 25 cms. projection for keeping fire buckets made out of 15 mm. dia M.S. rod grouted in wall to a depth of minimum 15 cms.
1
-
-
... More
ELW 06.00 MV Switch Gear and power Panel
Supplying, unloading at site, shifting to site, assembling, leveling, grouting, erecting, Testing, & Commissioning compartmentalized type Panels with powder coated fabricated from CRCA sheet & folded channel totally enclosed cubical type with pad lock arrangement complete in all respect as per detail tedner specifications. The successful tenderer will have to prepare general arrangement with dimensions & get it approve through Engineer In charge / Consultant.Panels should be as per detail single line drawing with required nos of incoming and outgoing feeders and accessories complete in all respect
MAIN PANEL AT SUBSTATION -1
As per Single line diagram
1
-
-
... More
Supplying, unloading at site, shifting to site, assembling, leveling, grouting, erecting, Testing, & Commissioning compartmentalized type Panels with powder coated fabricated from CRCA sheet & folded channel totally enclosed cubical type with pad lock arrangement complete in all respect as per detail tedner specifications. The successful tenderer will have to prepare general arrangement with dimensions & get it approve through Engineer In charge / Consultant.Panels should be as per detail single line drawing with required nos of incoming and outgoing feeders and accessories complete in all respect
HVAC PANEL AT UTILITY BUILDING As per Single line diagram
1
-
-
... More
Supplying, unloading at site, shifting to site, assembling, leveling, grouting, erecting, Testing, & Commissioning compartmentalized type Panels with powder coated fabricated from CRCA sheet & folded channel totally enclosed cubical type with pad lock arrangement complete in all respect as per detail tedner specifications. The successful tenderer will have to prepare general arrangement with dimensions & get it approve through Engineer In charge / Consultant.Panels should be as per detail single line drawing with required nos of incoming and outgoing feeders and accessories complete in all respect.
PLUMBING PANEL AT UTILITY BUILDING
As per Single line diagram
1
-
-
... More
Supplying, unloading at site, shifting to site, assembling, leveling, grouting, erecting, Testing, & Commissioning compartmentalized type Panels with powder coated fabricated from CRCA sheet & folded channel totally enclosed cubical type with pad lock arrangement complete in all respect as per detail tedner specifications. The successful tenderer will have to prepare general arrangement with dimensions & get it approve through Engineer In charge / Consultant.Panels should be as per detail single line drawing with required nos of incoming and outgoing feeders and accessories complete in all respect.
UTILITY PANEL
As per Single line diagram
2
-
-
... More
Supplying, unloading at site, shifting to site, assembling, leveling, grouting, erecting, Testing, & Commissioning compartmentalized type Panels with powder coated fabricated from CRCA sheet & folded channel totally enclosed cubical type with pad lock arrangement complete in all respect as per detail tedner specifications. The successful tenderer will have to prepare general arrangement with dimensions & get it approve through Engineer In charge / Consultant.Panels should be as per detail single line drawing with required nos of incoming and outgoing feeders and accessories complete in all respect.
300KVAR APFCR PANEL
As per Single line diagram
6
-
-
... More
Supplying, unloading at site, shifting to site, assembling, leveling, grouting, erecting, Testing, & Commissioning compartmentalized type Panels with powder coated fabricated from CRCA sheet & folded channel totally enclosed cubical type with pad lock arrangement complete in all respect as per detail tedner specifications. The successful tenderer will have to prepare general arrangement with dimensions & get it approve through Engineer In charge / Consultant.Panels should be as per detail single line drawing with required nos of incoming and outgoing feeders and accessories complete in all respect.
MAIN PANEL AT POSTMORTEAM BLOCK
As per Single line diagram
1
-
-
... More
Supplying, unloading at site, shifting to site, assembling, leveling, grouting, erecting, Testing, & Commissioning compartmentalized type Panels with powder coated fabricated from CRCA sheet & folded channel totally enclosed cubical type with pad lock arrangement complete in all respect as per detail tedner specifications. The successful tenderer will have to prepare general arrangement with dimensions & get it approve through Engineer In charge / Consultant.Panels should be as per detail single line drawing with required nos of incoming and outgoing feeders and accessories complete in all respect.
STP PANEL
As per Single line diagram
1
-
-
... More
Supplying, unloading at site, shifting to site, assembling, leveling, grouting, erecting, Testing, & Commissioning compartmentalized type Panels with powder coated fabricated from CRCA sheet & folded channel totally enclosed cubical type with pad lock arrangement complete in all respect as per detail tedner specifications. The successful tenderer will have to prepare general arrangement with dimensions & get it approve through Engineer In charge / Consultant.Panels should be as per detail single line drawing with required nos of incoming and outgoing feeders and accessories complete in all respect.
KITCHEN PANEL
As per Single line diagram
1
-
-
... More
ELW 07.00 DG Set with AMF panel
Supplying, installation, testing and commissioning of DG set of 2000 KVA with approximate 2319 BHP engine with enclouser & suitable alternator complete with all necessary fuel piping,Aluminium cladding, exhaust piping, stacking for exhaust piping, control panel, Auto synchronizing, auto load sharing AMF Panel, silencer & its piping, Acoustic silencer, Alternator cable termination box suitable for Aluminium cables,initial battery charging,base frame, battery and charger complete in all respect. Scope also includes preparing necessary drawing submitting to authorities, getting their approval / sanction and final certificate from appropriate authorities including electrical inspector, pollution board(if required) etc to energize the D G Set. Complete in all respect with all required accessories.
2
-
-
... More
ELW 08.00 Distribution Board
DISTRIBUTION BOARD Supplying, assembling, grouting, levelling, installation, Connecting,testing and commissioning of D.B of specified make but without MCB / ELMCB/MCCB etc but with all internal busbar as per requirement.
TPN Distribution Board :
Supplying, erecting, testing and commissioning of only TPN D.B. with space for FPMCB as incoming and space for DPELMCB and 12 SPMCB as outgoing per phase (i.e. 16 way TPN D.B.) with 16 way PPI kit
1
-
-
... More
Supplying, assembling, grouting, levelling, installation, Connecting testing and commissioning of D.B of specified make but without MCB / ELMCB/MCCB etc but with all internal busbar as per requirement.
Supplying, erecting, testing and commissioning of only TPN D.B. with space for FPMCB as incoming and space for DPELMCB and 8 SPMCB as outgoing per phase (i.e. 12 way TPN D.B.) with 12 way PPI kit
4
-
-
... More
Supplying, assembling, grouting, levelling, installation, Connecting testing and commissioning of D.B of specified make but without MCB / ELMCB/MCCB etc but with all internal busbar as per requirement.
Supplying, erecting, testing and commissioning of only TPN D.B. with space for FPMCB as incoming and space for DPELMCB and 4 SPMCB as outgoing per phase (i.e. 8 way TPN D.B.) with 8 way PPI kit
5
-
-
... More
Supplying, erecting, testing and commissioning of only TPN D.B. with space for FPMCB as incoming and space for 3 no. FPMCB as outgoing(i.e. 4 way TPN D.B.) 4 way PPI kit
1
-
-
... More
SPN Distribution Board :
Supplying, erecting, testing and commissioning of SPN D.B. with space for DPELMCB as incoming and 12 SPMCB as outgoing per phase (i.e. 16 way SPN D.B.)
4
-
-
... More
VTPN Distribution Board:
Supplying,erecting, testing and commissioning of only VTPN D.B. having suitable space for 63 A FP MCCB as incomer and 8 TP MCBs as outgoing
1
-
-
... More
MCB 's and its Accessories
Supplying, Assembling, levelling, connecting testing and commissioning of following MCB / ELMCB / MCCB etc in boards as specified in 8.1, 8.2.
Miniature circuit breaker single pole 1A to 32A. suitable to operate on 240V. A.C. system and having breaking capacity 10 KA to be erected in existing box. Confirming to IS 8828 / 1996 with ISI Mark.
159
-
-
... More
SITC of 240V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS: 8828 in existing box having following capacity. 6 to 32 A DP MCB
37
-
-
... More
SITC of FP 20A / 25A /32A ELMCB (30mA)
4
-
-
... More
SITC of FP 40 A ELMCB (30mA)
1
-
-
... More
SITC of FP 63 A ELMCB (30mA)
1
-
-
... More
SITC of DP 20A / 25A ELMCB(ELCB+MCB) (30mA)
1
-
-
... More
SITC of 32 A DP ELMCB(ELCB+MCB) (100mA)
1
-
-
... More
SITC of 32/40 A DP ELMCB(ELCB+MCB) (30mA)
1
-
-
... More
SITC of 40 A DP ELMCB(ELCB+MCB) (100mA)
1
-
-
... More
SITC of 63 A DP ELMCB(ELCB+MCB) (30mA)
1
-
-
... More
SITC of 63 A DP ELMCB(ELCB+MCB) (100mA)
1
-
-
... More
SITC of 63 A FP ELMCB(ELCB+MCB) (300mA)
1
-
-
... More
SITC of 32 A TP MCB
1
-
-
... More
SITC of 32 A DP ELCB (30mA)
2
-
-
... More
SITC of 40 A DP ELCB (30mA)
2
-
-
... More
SITC of 63 A DP ELCB (30mA)
2
-
-
... More
SITC of 32 A DP ELCB (100mA)
1
-
-
... More
SITC of 40 A DP ELCB (100mA)
1
-
-
... More
SITC of 63 A DP ELCB (100mA)
1
-
-
... More
SITC of 32 A FP MCB
2
-
-
... More
SITC of 40 A FP MCB
1
-
-
... More
SITC of Sheet steel metal enclouser for DP MCB
1
-
-
... More
SITC of Sheet steel metal enclouser for FP MCB
1
-
-
... More
SITC of Blank Plates
6
-
-
... More
SITC of 32 A TP MCB
8
-
-
... More
SITC of 32 A DP ELCB (30mA)
18
-
-
... More
SITC of 40 A DP ELCB (100mA)
1
-
-
... More
SITC of 32 A FP MCB
7
-
-
... More
SITC of 40 A FP MCB
1
-
-
... More
SITC of 63 A FP MCB
2
-
-
... More
SITC of Sheet steel metal enclouser for DP MCB
2
-
-
... More
SITC of Sheet steel metal enclouser for FP MCB
3
-
-
... More
SITC of Blank Plates
12
-
-
... More
SITC of Under and over voltage protection release
15
-
-
... More
Surge Protection Devices (SPD) Supplying, Assembling, levelling, connecting,testing and commissioning of following VSPs etc in boards 1.2KV Protection level FP, Class 's', (Imax-15KA, 8/20µS)
9
-
-
... More
Surge Protection Devices (SPD) Supplying, Assembling, levelling, connecting testing and commissioning of following VSPs etc in boards 1.2KV Protection level DP, Class 's', (Imax-15KA, 8/20µS)
4
-
-
... More
Caution Board :
SITC of Caution boards of size 150 x 150 mm. to be supplied & fixed on the D.B.
13
-
-
... More
MCCB
SITC of 100 A FP MCCB with Sheet steel metal enclouser
1
-
-
... More
SITC of 160A FP MCCB with Sheet steel metal enclouser
1
-
-
... More
SITC of 250 A FP MCCB with Sheet steel metal enclouser
1
-
-
... More
SITC of 400 A FP MCCB with Sheet steel metal enclouser
1
-
-
... More
Supply installation testing and commissioning of 1250A FP EDO ACB with enclouser. Stand along floor mounted panel. with microprocessor Release with over load, short circuit, earth fault protection (L.S.I.G.) and metering display in modular design with LED display and Test Trip button facility, CTs and auxiliary contacts, Complete in all resect as per the specification.
3
-
-
... More
ELW 10.00 MV Cabling
CABLES
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Aluminum Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support.
400 Sq.mm x 3.5C Al. Cable
3713
-
-
... More
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Aluminum Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support.
300 Sq.mm x 3.5C Al. Cable
100
-
-
... More
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Aluminum Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support.
240 Sq.mm x 3.5C Al. Cable
299
-
-
... More
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Aluminum Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support.
185 Sq.mm x 3.5C Al. Cable
723
-
-
... More
Supply, testing and Layingand commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Aluminum Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support.
150 Sq.mm x 3.5C Al. Cable
10
-
-
... More
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Aluminum Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support.
120 Sq.mm x 3.5C Al. Cable
685
-
-
... More
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Aluminum Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support.
95 Sq.mm x 3.5C Al. Cable
343
-
-
... More
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Aluminum Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support.
70 Sq.mm x 3.5C Al. Cable
10
-
-
... More
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Aluminum Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support.
50 Sq.mm x 3.5C Al. Cable
125
-
-
... More
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Aluminum Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support.
35 Sq.mm x 3.5C Al. Cable
293
-
-
... More
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Aluminum Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support.
25 Sq.mm x 3.5C Al. Cable
182
-
-
... More
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Copper Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support.
16 Sq.mm x 4C CU. Cable
416
-
-
... More
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Copper Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support.
10 Sq.mm x 4C CU. Cable
115
-
-
... More
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Copper Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support.
6 Sq.mm x 4c CU. Cable
449
-
-
... More
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Copper Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support.
4 Sq.mm x 4c CU. Cable
256
-
-
... More
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Copper Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support.
6 Sq.mm x 3c CU. Cable
50
-
-
... More
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Copper Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support.
4 Sq.mm x 3c CU. Cable
10
-
-
... More
Supply, testing and Laying and commissioning of XLPE steel wire/flat armoured cable of 1100 V grade of Aluminum Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 10 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support.
2.5 Sq.mm x 3c Al. Cable
100
-
-
... More
ELW 11.00 Cable Termination
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. for the following sizes:
400 Sq.mm x 3.5C Al. Cable
102
-
-
... More
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. for the following sizes:
300 Sq.mm x 3.5C Al. Cable
2
-
-
... More
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. for the following sizes:
240 Sq.mm x 3.5C Al. Cable
8
-
-
... More
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. for the following sizes:
185 Sq.mm x 3.5C Al. Cable
28
-
-
... More
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. for the following sizes:
150 Sq.mm x 3.5C Al. Cable
2
-
-
... More
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. for the following sizes:
120 Sq.mm x 3.5C Al. Cable
14
-
-
... More
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. for the following sizes:
95 Sq.mm x 3.5C Al. Cable
8
-
-
... More
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. for the following sizes:
70 Sq.mm x 3.5C Al. Cable
2
-
-
... More
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. for the following sizes:
50 Sq.mm x 3.5C Al. Cable
4
-
-
... More
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. for the following sizes:
35 Sq.mm x 3.5C Al. Cable
6
-
-
... More
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. for the following sizes:
25 Sq.mm x 3.5C Al. Cable
2
-
-
... More
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. for the following sizes:
16 Sq.mm x 4C CU. Cable
14
-
-
... More
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. for the following sizes:
10 Sq.mm x 4C CU. Cable
4
-
-
... More
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. for the following sizes:
6 Sq.mm x 4C CU. Cable
16
-
-
... More
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. for the following sizes:
4 Sq.mm x 4C CU. Cable
8
-
-
... More
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. for the following sizes:
6 Sq.mm x 3c CU. Cable
2
-
-
... More
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. for the following sizes:
4 Sq.mm x 3c CU. Cable
2
-
-
... More
SITC of Brass glands & making joint with necessary bi metalic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. for the following sizes:
2.5 Sq.mm x 3c CU. Cable
2
-
-
... More
ELW 12.00 Cable Tray
Supply, Installation, testing and commissioning of hot dip GI ladder type cable tray with all accessories like coupler, GI nut bolts,bend, tee, reduser etc as per specification and drawings complete with all required hardware :
150 x 100 made out of 2 mm thick ladder type
320
-
-
... More
Supply, Installation, testing and commissioning of hot dip GI ladder type cable tray with all accessories like coupler, GI nut bolts,bend, tee, reduser etc as per specification and drawings complete with all required hardware :
300 x 100 made out of 2 mm thick ladder type
75
-
-
... More
Supply, Installation, testing and commissioning of hot dip GI ladder type cable tray with all accessories like coupler, GI nut bolts,bend, tee, reduser etc as per specification and drawings complete with all required hardware :
450 x 100 made out of 2 mm thick ladder type
75
-
-
... More
Supply, Installation, testing and commissioning of hot dip GI ladder type cable tray with all accessories like coupler, GI nut bolts,bend, tee, reduser etc as per specification and drawings complete with all required hardware :
600 x 100 made out of 2 mm thick ladder type
100
-
-
... More
Supply, Installation, testing and commissioning of hot dip GI perforated type cable tray with all accessories like coupler, GI nut bolts,bend, tee, reduser etc as per specification and drawings complete with all required hardware :
150 x 100 made out of 2 mm thick perforated type
40
-
-
... More
Supply, Installation, testing and commissioning of hot dip GI perforated type cable tray with all accessories like coupler, GI nut bolts,bend, tee, reduser etc as per specification and drawings complete with all required hardware :
300 x 100 made out of 2 mm thick perforated type
10
-
-
... More
Supplying , fabricating and installation of various sizes clamps for cable tray supports using available M.S. sections & rod as per drawings or instructions of engineer in charge or consultant including applying zinc chromate yellow oxide and two to three coats of required enamel paints with anchor fasteners etc.
3500
-
-
... More
ELW 14.00 Internal Wiring
WITH MODULAR TYPE SWITCHES
Wiring of points to be done in open/concealed manner in 25 mm dia medium guage Rigid PVC FRLS pipe. Wiring shall be done with FRLS type copper flexible wire of 650V/1100V. Separate pipe should be taken for circuit mains. Nos of ciruit of the same phases may be taken in same conduit .The circuit shall be laid in 25/40 mm dia medium guage rigid PVC FRLS pipe.The point rate shall include all the necessary piping and wiring from sub panel / Distribution board to switch board & switch board to the batten holder / angle holder / connector / ceiling rose all inclusive except sub panel / Dist board.
The wiring shall be done as per relevant prevailing standard. The looping of the wiring should be done in the switch boxes or light and fan point outlet boxes to avoid the junction boxes. The junction boxes and switch boxes for the ceiling light point, fan point etc shall be minimum 60/75 deep. All the necessary jarry in brick plastered walls should be done with machine cutter only , also jarry should be filled with cement, sand and wire mesh as required, the material cost for rough finish shall be included in point rate.Whenever pipes are required to be laid in flooring shall be of.Wiring should be done as per distribtion details. Each circuit should have dedicated phase, neutral & earth wire. Wire sizes to be used as under
For Light Points /fan point/ wall fan / 6A 3 Pin Plug
- DB to SB - 2.5sqmm for Phase & Neutral & 1.5 sqmm for Earth
- SB to on board Point - 1.5 sqmm for Phase & Neutral & Earth
For 6A Plug point.
- 1.5 sqmm for Phase, Neutral & Earth
For 6/10/16A general purpose plug point
- 2.5 sqmm for Phase, Neutral & 1.5 sqmm Earth
For 16A plug point for A/C and Geyser
- 4 Sqmm for Phase, Neutral & 2.5 sqmm Earth
For 20/32A plug point
- 6 sqmm for Phases, Neutral & 4 sqmm Earth
No zarry will be allowed in expose brick work. The conduit shall be provided when the walls are under construction. The pipes in slab shall be laid before the slab is casted.
One light point controlled by one single way 6 A switch.
82
-
-
... More
Loop light point to be controlled from same switch.(Looping from first point)
169
-
-
... More
One light point controlled by two, two way 6 A switch
6
-
-
... More
One ceiling fan outlet point controlled by one 6 A switch and hum free electronic type step regulator and cast iron fan box.
67
-
-
... More
One 6 A x 5 pin 250 Volt universal socket outlet point controlled by one 6 A switch located on switch board.
41
-
-
... More
6 A x 5 pin 250 Volt universal switched socket outlet point at convenient location.
19
-
-
... More
6/16 A x 250 V switch socket point on one switch box with 2.5 sqmm flexible wires and phase and neutral and 1.5 sq nm flexible Cu. wire as earth wire. The rate should include conduiting upto DB.
50
-
-
... More
6/16A x 250 Volt switched socket outlet point for AC with 4 sq.mm wire for phase and neutral & 2.5 sq.mm earth wire.
16
-
-
... More
-Do- as above but switch and socket at different location for Geyser
10
-
-
... More
Exhaust fan outlet point with 6A 5 pin socket controlled by one 5 single way switch located at different location.
11
-
-
... More
Bell point controlled by Bell push switch with Buzzer / bell of approved make.
1
-
-
... More
SITC computer power supply point with 2 nos of 6 amp 5 pin socket with 1 no. of 6/16 Amp. socket with 1 no 16 A Switch with indicator & wiring of computer point will be done through 2 nos.of 2.5 sq. mm Cu. wires as phase & Neutral and 1 nos. of 1.5 sq.mm.as earth wire. .( This cost includes the wiring from DB to Computer point.)
12
-
-
... More
SITC of Outdoor Type 6/16A Socket with Switch, Suitable for outdoor appication (IP66)
7
-
-
... More
METAL CLAD SWITCJH SOCKET
SITC of Metal Clad Switch Socket with 10A SP MCB (2P+E)
11
-
-
... More
SITC of Metal Clad Switch Socket with 20A DP MCB (2P+E)
11
-
-
... More
SITC of Metal Clad Switch Socket with 20A FP ELMCB (2P+E)
11
-
-
... More
SITC of Metal Clad Switch Socket with 32A FP ELMCB (P+E)
25
-
-
... More
MAINS
The mains is considered from the meter/sub panel to the individual distribution boards.
Supplying and Laying mains with 4 nos. of 25 sq mm Cu. PVC insulated FRLS flexible wire with ISI approval for 650 V/ 1100 V and 2 nos 10 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 50 mm diameter rigid PVC conduit of medium guage having ISI and FIA approval with all necessary accessories.
125
-
-
... More
SITC of mains with 4 nos. of 16 sq mm Cu. PVC insulated FRLS flexible wire with ISI approval for 650 V/ 1100 V and 2 nos 6 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 40 mm diameter rigid PVC conduit of medium guage having ISI and FIA approval with all necessary accessories.
225
-
-
... More
SITC of mains with 4 nos. of 10 sq mm Cu. PVC insulated FRLS flexible wire with ISI approval for 650 V/ 1100 V and 2 nos 4 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 40 mm diameter rigid PVC conduit of medium guage having ISI and FIA approval with all necessary accessories.
245
-
-
... More
SITC of mains with 4 nos. of 6 sq mm Cu. PVC insulated FRLS flexible wire with ISI approval for 650 V/ 1100 V and 2 nos 2.5 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 25 mm diameter rigid PVC conduit of medium guage having ISI and FIA approval with all necessary accessories.
405
-
-
... More
SITC of mains with 2 nos. of 4 sq mm Cu. PVC insulated FRLS flexible wire with ISI approval for 650 V/ 1100 V and 1 no 4.0 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 25 mm diameter rigid PVC conduit of medium guage having ISI amd FIA approval with all necessary accessories.
270
-
-
... More
SITC of mains with 2 nos. of 6 sq mm Cu. PVC insulated FRLS flexible wire with ISI approval for 650 V/ 1100 V and 1 no 4.0 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 25 mm diameter rigid PVC conduit of medium guage having ISI amd FIA approval with all necessary accessories.
270
-
-
... More
SITC of mains with 2 nos. of 10 sq mm Cu. PVC insulated FRLS flexible wire with ISI approval for 650 V/ 1100 V and 1 nos 6.0 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 25 mm diameter rigid PVC conduit of medium guage having ISI and FIA approval with all necessary accessories.
270
-
-
... More
SITC of mains with 2 nos. of 2.5 sq mm Cu. PVC insulated FRLS flexible wire with ISI approval for 650 V/ 1100 V and 1 no 2.5 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 25 mm diameter rigid PVC conduit of medium guage having ISI amd FIA approval with all necessary accessories.
650
-
-
... More
SITC of mains with 2 nos. of 1.5 sq mm Cu. PVC insulated FRLS flexible wire with ISI approval for 650 V/ 1100 V and 1 no 1.5 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 25 mm diameter rigid PVC conduit of medium guage having ISI amd FIA approval with all necessary accessories.
450
-
-
... More
Supplying , fabricating and installation of various sizes junction boxes made out to 14 gauge sheet with all necessary accessories & hardware etc All the necessary fabrication required will be included in the scope of contractor. Scope also includes two coat of primer and two coat of paining of each items on all the sides complete in all respect.
35
-
-
... More
SITC of of 3 compatement 225 mm x 38 mm, 1.6mm thick, under floor metal trunking/race way with all accessories made out of hot dip pre galvanized metal coated steel sheet.
10
-
-
... More
SITC of of 1 compartement 100 mm x 38 mm, 1.6 mm thick, under floor metal trunking/race way with all accessories made out of hot dip pre galvanized metal coated steel sheet.
10
-
-
... More
SITC of 3 compartment Access outlet / service box of 250 x 250 x 60-75 mm with all accessories made out of high pressure die cast material suitable for above race ways .
5
-
-
... More
SITC of 2 compatement 100 mm x 50 mm wall trunking/race way with cover and all accessories made out of PVC .
60
-
-
... More
ELW 15.00Light Fixtures and Fans
Supplying and erecting, testing and commissioning of 18WLED recessed Mounted Down Lighter -Make Crompton ( Type-LCDE -18-CDL) or equivalent as per apporved make list.
20
-
-
... More
Supplying and erecting, testing and commissioning of 12WLED recessed Mounted Down Lighter -Make Crompton ( Type-LCDE -12-CDL) or equivalent as per apporved make list.
1
-
-
... More
Supplying and erecting, testing and commissioning of 26W LED Recessed Mounted Circular Down Lighter -Make Wipro or equilavent ( Halo,CRDL-11R033HP57)
1
-
-
... More
Supplying and erecting, testing and commissioning of 36W LED Recessed Mounted Square indoor Panel -Make Crompton or equilavent (LCTLRN-36-F0-CDL)
13
-
-
... More
Supplying and erecting, testing and commissioning of 50W LED Recessed Mounted Square indoor Panel -Make Crompton or equilavent (LCTLRN-50-F0-CDL)
1
-
-
... More
Supplying and erecting, testing and commissioning of 1x10W 1200mm LED Surface Mounted indoor Linear smart Bright Battern Lights Fittings -Make Phillips or equilavent ( BN021)
25
-
-
... More
Supplying and erecting, testing and commissioning of 1x20W 600mm LED Surface Mounted indoor Linear smart Bright Battern Lights Fittings -Make Phillips or equilavent ( BN021C)
68
-
-
... More
Supplying and erecting, testing and commissioning of LED Surface Mounted Down Lighter 18W LED -Make Crompton or equilavent (LCDSPLN-R-18-CDL)
43
-
-
... More
Supplying and erecting, testing and commissioning of LED Surface Mounted Down Lighter 12W LED -Make Crompton or equilavent (LCDSPLN-R-12-CDL)
5
-
-
... More
Supplying and erecting, testing and commissioning of 26W Circular LED Surface Mounted indoor Lights Fittings with High Efficency Translucence Diffuser -Make Wipro or equilavent ( Halo,CDSL-11S033HP57)
1
-
-
... More
Supplying and erecting, testing and commissioning of Hanging Light Point -Wipro or equilavent (Type-ORBIT LED) 34W(CODE-LM-71-441-XXX-57-XX)- or equivalent as per apporved make list.
1
-
-
... More
Supplying and erecting, testing and commissioning of LED Surface Mounted Industrail Corroson proof Fixture Ip 65 -Make Crompton or equilavent (IPFC111LT8-16 1X 20W)
10
-
-
... More
Supplying and erecting, testing and commissioning of LED Surface Mounted Industrail Corroson proof Fixture Ip 65 -Make Crompton or equilavent (IPFC112LT8-16 2X 20W)
10
-
-
... More
Supplying and erecting, testing and commissioning of LED Surface Mounted Down Lighter -Make Ligman or equilavent (TANGO-TA-80551 37W LED) ( EXTERIOR-IP65)
30
-
-
... More
Supplying and erecting, testing and commissioning of 21W 4' Feet LED Recessed Mounted indoor Channel Linear Lights Fittings with diffuser-Make Philips make Channel RC780B LED 26S-6500PSU W6L120ODSI or equivalent as per apporved make list.
8
-
-
... More
Supplying and erecting, testing and commissioning of 46W 8' Feet LED Recessed Mounted indoor Channel Linear Lights Fittings with diffuser-Make Philips make Channel RC780B LED 52S-6500PSU W6L240ODSIor equivalent as per apporved make list.
9
-
-
... More
Supplying and erecting, testing and commissioning of 21W 4' Feet LED Surface Mounted indoor Channel Linear Lights Fittings with diffuser-Make SP780P LED 26S-6500PSU W6L120ODSI or equivalent as per apporved make list.
8
-
-
... More
Supplying and erecting, testing and commissioning of 46W 8' Feet LED Surface Mounted indoor Channel Linear Lights Fittings with diffuser-Make SP780P LED 52S-6500PSU W6L240ODSIor equivalent as per apporved make list.
9
-
-
... More
SITC of Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 230 V. 50 Cys. 900 mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2, 3 core flexible wire with earthing
1
-
-
... More
SITC of Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 230 V. 50 Cys. 1200 mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2, 3 core flexible wire with earthing
28
-
-
... More
SITC of Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 230 V. 50 C/s. 1400 mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2,3 core flexible Copper wire with earthing
1
-
-
... More
Supplying and erecting, testing and commissioning of exhaust fan equivalent to crompton make Cross Air Fan 10” DIA with self opening louvers.
1
-
-
... More
SITC of 19/20mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with necessary 24/O. 2 flat 3 core flexible wire with ear thing.
28
-
-
... More
SITC of approved make low noise decorative exhaust fan having size 200mm with 1350 RPM with square frame.ABS body with inbuilt lowers & square frame.
1
-
-
... More
Supplying and erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in RPM. (A)305 mm dai 900 RPM (CAT-2)
1
-
-
... More
Supplying and erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in RPM. (B)380 mm dai 900 RPM (CAT-2)
1
-
-
... More
Supplying and erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in RPM. (C)380 mm dai 1400 RPM (CAT-2)
1
-
-
... More
Supplying and erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in RPM. (D)450 mm dai 900 RPM (CAT-2)
1
-
-
... More
Supplying and erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in RPM. (E)450 mm dai 1400 RPM (CAT-2)
6
-
-
... More
SITC of suitable M.S. louver shutter of the Exhaust fan.
10
-
-
... More
ELW 16.00 Earthing
Supplying, installing, testing & commissioning of Maintenance Free Chemical Earthing System consisting of (A) Copper Bonded Earth Rod of 3 Mtr x 5/8" size using earth enhancing compound of 25 Kg & termination clamp. Complete in all respect with all reuqired accessories.
64
-
-
... More
Earth wire/strips :
Supply and laying cu. earthing required size strips for interconnecting the earthing stations, panels, DB's etc. in built up trenches, on walls/ceiling, buried in ground generally as specified and shown on drawings complete with :
a) Fixing accessories.
b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes.
25 x 3 mm/ 32X6mm / 50x6mm CU. strip/ 38x6 Cu earth link
2494
-
-
... More
SITC of No.8 gauge bare cu. earth wire Complete in all respect with all reuqired accessories.
154
-
-
... More
ELW 18.00 Miscellaneous PVC PIPES
Supplying and laying following sizes PVC pipe of approved make including excavation of trenches, laying the pipe as per layout and drawing and re-filling the trenches etc. complete as directed.
Heavy gauge pipe in Open / Concealed manner minimum 25 mm dia with GI pulling wire.
400
-
-
... More
Supplying and laying following sizes PVC pipe of approved make including excavation of trenches, laying the pipe as per layout and drawing and re-filling the trenches etc. complete as directed.
Heavy gauge pipe in Open / Concealed manner minimum 32 mm dia with GI pulling wire.
150
-
-
... More
Supplying and laying following sizes PVC pipe of approved make including excavation of trenches, laying the pipe as per layout and drawing and re-filling the trenches etc. complete as directed.
Heavy gauge pipe in Open / Concealed manner minimum 40 mm dia.
100
-
-
... More
Supplying and laying following sizes PVC pipe of approved make including excavation of trenches, laying the pipe as per layout and drawing and re-filling the trenches etc. complete as directed.
Heavy gauge pipe in Open / Concealed manner minimum 50 mm dia.
100
-
-
... More
Supplying and laying following sizes PVC pipe of approved make including excavation of trenches, laying the pipe as per layout and drawing and re-filling the trenches etc. complete as directed.
Heavy gauge pipe in Open / Concealed manner minimum 75 mm dia.
100
-
-
... More
Supplying and laying following sizes PVC pipe of approved make including excavation of trenches, laying the pipe as per layout and drawing and re-filling the trenches etc. complete as directed.
Heavy gauge pipe in Open / Concealed manner minimum 90 mm dia.
100
-
-
... More
Supplying and laying following sizes PVC pipe of approved make including excavation of trenches, laying the pipe as per layout and drawing and re-filling the trenches etc. complete as directed.
Heavy gauge pipe in Open / Concealed manner minimum 110 mm dia.
100
-
-
... More
Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc. complete of following sizes.
25mm
100
-
-
... More
Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc. complete of following sizes.
32mm
100
-
-
... More
Fire Stopper
SITC of Fire stop mortar system , with minimum 2 hours fire rating when tested in accordance with UL 1479/ASTM-E 814 standards, for horizontal openings in floors or slabs after passing service lines like cables/cable bundles, cable trays etc. The system shall be UL listed & classified and product shall bear the UL and FM approval logo on the packing. If none of UL test certificate comply with actual application, an EJ document (as per IFC Guidelines) prepared by a qualified personnel and based on nearest third party tested & approved systems like UL test certificates & in accordance with IFC guidelines shall be producted by manufacturer. A firestop submittal shall be produced by manufacturer , in accordance with approved passive fire protection method statement, for technical approval. Firestop installation shall be done by manufacturer's Accredited Firestop Speciality Contractor (HAFSC) and in accordance with manufacturer guidelines and UL system test certificates or approved EJ document. .
3
-
-
... More
SITC of rodent and termite proof Fire Barriers on both sides of wall ( Composite Sheet) system for 2 hours fire rating when tested in accordance with ASTM E 814/UL 1479 standards. The small gaps left around the penetrants should be closed with Intumescent sealant , or with Fire rated Moldable Putty , which should be soft & moldable to any shape, to give complete L Rating. This system is to seal all fire rated vertical in wall made of concrete, masonry, metal, gypsum partition, after passing service lines like cables/cable bundles, cable trays etc. The system shall be UL listed & classified and product shall bear the UL & FM approval logo on the packing. If none of UL test certificate comply with actual application, an EJ document prepared by a qualified personnel and based on nearest third party tested & approved systems like UL test certificates & in accordance with IFC guidelines shall be producted by manufacturer. Firestop installation shall be done by manufacturer's Accredited Firestop Speciality Contractor (HAFSC) and in accordance with manufacturer's guidelines and UL system test certificates or approved EJ document.
2
-
-
... More
SITC of Provide expanding firestop foam on both sides of wall, with minimum 2 hours fire rating when tested in accordance with UL 1479/ASTM-E 814, for horizontal/ vertical openings in floors / wall or slabs made of concrete/ masonry or Gypsum after passing service lines like cable trays or cables/cable bundlesThe system shall be UL listed & classified and product shall bear the UL and FM approval logo on the packing. The system shall be UL listed & classified and product shall bear the UL & FM approval logo on the packing. If none of UL test certificate comply with actual application, an EJ document (as per IFC Guidelines) prepared by a qualified personnel and based on nearest third party tested & approved systems like UL test certificates & in accordance with IFC guidelines shall be producted by manufacturer.Firestop installation shall be done by manufacturer's Accredited Firestop Speciality Contractor (HAFSC) and in accordance with manufacturer's guidelines and UL system test certificates or approved EJ document.
2
-
-
... More
SITC of Firestop Factory-assembled cable device Speed Sleeve - (4" Size) , containing an intumescent material and a flexible cloth which limits the warm and cold smoke propagation to less than 1 CFM per device for passing cables through floor slab to provide minimum 2 hours fire rating when subject to test standards of UL 1479/ASTM-E 814. The system shall be UL listed & classified and product shall bear the UL and FM approval logo on the packing. If none of UL test certificate comply with actual application, an EJ document (as per IFC Guidelines) prepared by a qualified personnel and based on nearest third party tested & approved systems like UL test certificates & in accordance with IFC guidelines shall be producted by manufacturer. Firestop installation shall be done by manufacurer's Accredited Firestop Speciality Contractor (HAFSC) and in accordance with manufacturer's guidelines and UL system test certificates or approved EJ document.
2
-
-
... More
SITC of intumescent based coating on cables/bunch cables & cable tray for at least 1 mtr in every 14 mtrs for horizontal runs and to entire length of vertical runs . The coating shall have a density in the range of 1.2 to 1.4 Kg/ L. The coating shall be non-toxic, asbestos and halogen free and shall have good mechanical strength. Firestop installation shall be done by manufacturer's Accredited Firestop Speciality Contractor (HAFSC) and in accordance with manufacturer's guidelines .
2
-
-
... More
ELW 20.00 Lighitning Protection
Supply, installation tesitng and commissioning of of 8 mm Aluminum Round Conductor complete with inter-connection, including clamps for connecting air terminal to roof conductor, and conductor holders at parapetas/roof specified in drawing & Meets the requirements of DIN EN 50164-2 (VDE 0185 part 202) & VDE 0185-305 (IS/IEC 62305) , Complete in all respect with all required accessories.
360
-
-
... More
Supply, installation, testing and commissioning of test link complete with inter connections between aluminium round conductor & GI strip or GI strip to GI strip all fixing accessories etc required for complete installation, Complete in all respect with all required accessories.
1
-
-
... More
SITC of Vertical 3 mtr High Air terminal with accessories complete in all respect :Providing of Air terminals as per IS-IEC -62305 part-3 16mm rod tapered to 10 mm aluminium rod : Meets the technical specification according to DIN EN
50164-2 (VDE 0815 part 202). Meets the requirement of VDE0185/305(IS/IEC 62305) semi-hard (E-AlMgSiO5 corresponds to
DIN 48801) Suitable for high wind load. Accessories : System consist of Fang Fix with base and clamp, on the top air terminal is erected. Fang fix clamp made of SS, lightning tested for 100 KA 10/350 micro sec waveform. 16 KG stone of 365 mm diameter, high level of stability. Quick and easy mounting of interception rod using anchors. Concrete, frost-resistant, can be stacked. 3 mtr High Air Terminal Complete in all respect with all reuqired accessories.
3
-
-
... More
SITC of Galvanised Steel Flat 30X3 mm thick from earth
electrode directly in ground as required. Hot Dip GI strip,
Cross sectional area of 90mm square
According to DIN EN 50164-2 (VDE 0185 part 202) Meets
the requirement of VDE0185/305(IS-IEC 62305) Zinc
coating: 500 g/m square (Approx :70 micron coating) Should
be tested and use exclusively for lightning protection
,earthing system and ring equipotential bonding. Complete in all respect with all reuqired accessories.
300
-
-
... More
ELW 21.00 UPS
Supply , Installation, Testing & Commissioning of ON LINE UPS system with 15 mins battery backup and with battery rack complete in all respect. 1KVA UPS 1 ph in 1 ph out for balance load
1
-
-
... More
Supply, Installation, Testing & Commissioning of ON LINE UPS system with 15 mins battery backup and with battery rack complete in all respect. 2KVA UPS 1 ph in 1 ph out for balance load
1
-
-
... More
Supply, Installation, Testing & Commissioning of ON LINE UPS system with 15 mins battery backup and with battery rack complete in all respect. 3KVA UPS 1 ph in 1 ph out for balance load
1
-
-
... More
4.00 ELV SYSTEMS
Sec.1.0 Telephone and Data Networking
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed.
25 mm
1890
-
-
... More
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed.
40 mm
150
-
-
... More
Tag Blocks - Multipair Telephone Cable Termination
Supply & fixing of 100 pair MDF unit with required modules in a fabricated CRCA powder coated junction box of size 450x250x100 with two no. of pad-lock, provision for earthing.
6
-
-
... More
Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs & wrapped with FR PVC tape & sheathed with FR PVC or HFFR outer jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos. of pairs. With necessary connections.
A Conductor Size 0.5 mm.
(b) Armoured. (Jelly Filled)
(4) One Hundred Pairs.
150
-
-
... More
Telephone / Data Networking Cabling
Supplying & erecting approved make LAN cable of following size in existing pipe as per direction.
[C] CAT - 6
2400
-
-
... More
Providing following type of Modular Type Accessories mounted with pvc / metallic box covered with appropriate front plate modules erected with necessary connection. As desired by Engineer In charge.
(8) Modem Jack for Computer Open RJ-45.
Cat. III.
60
-
-
... More
04 ELV Work
Sec.1.0 Telephone and Data Networking
Supplying, installation, testing and commissioning of UTP CAT6 24 ports capacity gigaspeed patch panel, all ports loaded with individual RJ-45 IOs. as per technical specification etc. as required.
5
-
-
... More
Supplying, installation, testing and commissioning of UTP CAT6 RJ45 ethernet patch cord - 7 feet as per technical specification etc. as required.
51
-
-
... More
Supplying, installation, testing and commissioning of UTP CAT6 RJ45 ethernet patch cord - 3 feet as per technical specification etc. as required.
51
-
-
... More
Supplying, installation, testing and commissioning of outdoor 24 core armoured single mode fiber optic cable for outdoor connectivity where ever required in prelaid conduits / RCC hume pipes/HDPE/DWC, whichever maybe available etc. as per technical specification etc. as required.
150
-
-
... More
Supplying, installation, testing and commissioning of 19" rack mounting type fiber shelf for assembly/termination of minimum 48 cores of singlemode ofc cable for LC style components, for optical splicing and provision for storage of pigtails and splices, equipped with adaptors, adaptor plates and any other such all necessary hardware for proper dressing and management of fiber optic cable etc. as required. Any blank adaptor positions must be suitably masked for restricting dust entry etc. as per technical specification etc. as required.
3
-
-
... More
Supplying, Splicing , testing and commissioning of LC type single mode pre-terminated pigtail 1mtr as per tender specification etc. as per technical specification etc. as required.
210
-
-
... More
Supplying, Installation, testing and commissioning of LC-LC single mode duplex fiber optic patch cord 1mtr. as per technical specification etc. as required.
19
-
-
... More
Networking Enclosures & Accessories
Supplying, installtion, testing and commissioning of ruggedized, IP55 rated outdoor Pole/Wall mountable 9U to 15U enclosure as per site requirement for housing power supplies, fiber LIUs, and networking switch, with suitable provisions for DIN rails, cable management as per technical specification etc. as per technical specification etc. as required.
5
-
-
... More
TYPE-2
Supplying, installation, testing and commissioning of Layer 2 Fully manageable networking switch, 24 # 10/100/1000Tx ports, all 24 ports shall be capable of providing PoE+ as per 802.3at, minimum 2 SFP+ ports. as per technical specification etc. as required.
2
-
-
... More
TYPE-3
Supplying, installation, testing and commissioning of Layer 2 Fully manageable networking switch, 24 # 10/100/1000Tx ports, minimum 2 SFP+ ports as per technical specification etc. as required.
1
-
-
... More
TYPE-6
Supplying, installtion, testing and commissioning of Industrial Grade Layer 2 Fully Managed 16 Ports PoE+ Gigabit Switches with Third Party industrial grade AC to DC adapter 160W-48VDC, as per technical specification etc. as required.
3
-
-
... More
Supplying, installation, testing and commissioning of 10G SFP+ Single mode transceiver, 1310nm, 2Km, LC connector, inclusive of any hardware such as modules for populating SM-LC transceivers as per technical specification etc. as required.
10
-
-
... More
Supply, Installation, Testing and Commissioning of Wireless indoor Access Point supporting Dual band with 802.11a/n/ac (5 GHz) and 802.11g/n (2.4GHz) concurrent operation with MIMO support 3x3, 3 spatial streams, One 10/100/1000 BASE-TX auto-sensing (RJ45) PoE port, as per technical specification etc. as required.
6
-
-
... More
Supply, Installation, Testing and Commissioning of IP Phone with display as per tender specification etc. as required.
17
-
-
... More
Sec.2.0 Video Survelance/CCTV System
Supply, Installation, Testing & Commissioning of IP Network TDN Low-Light IR Dome Camera, 1/2.8" CMOS, 2 MP @ 25fps, Min. Illumination required 0.01 lux @ F1.4 (color), 120dB True WDR, Min. Pixels 1920 X 1080, triple stream, 2.8 -12 mm motorized focus and zoom lens, BLC, HLC, 3DNR, Privacy Mask, IR LEDs Smart IR with upto 50m IR distance, Dual channel Audio G.711a/G.711u/AAC, 128GB SD card support, Alarm: 2 In/ 1out, PoE, H.264 High Profile and MJPEG, Inbuilt analytics Trigger line/Intrusion/Loitering, PoE Class 3 and 12V DC, IP 67, IK 10 vandal proof, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S & Profile G compliant, UL, CSA 60950-22, CE (EN 50130-4 & EN 55022) , FCC Part 15 & RoHS compliant, as per technical specification etc. as required.
13
-
-
... More
Supply, Installation, Testing & Commissioning of IP Network TDN Low-Light IR Bullet Camera, 1/2.8" CMOS, 2 MP @ 25fps, Min. Illumination required 0.01 lux @ F1.4 (color), 120dB True WDR, Min. Pixels 1920 X 1080, triple stream, 2.8 -12 mm motorized focus and zoom lens, BLC, HLC, 3DNR, Privacy Mask, IR LEDs Smart IR with upto 50m IR distance, Dual channel Audio G.711a/G.711u/AAC, 128GB SD card support, Alarm: 2 In/ 1out, PoE, H.264 High Profile and MJPEG, Inbuilt analytics Trigger line/Intrusion/Loitering, PoE Class 3 and 12V DC, IP 67, IK 10 vandal proof, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S & Profile G compliant, UL, CSA 60950-22, CE (EN 50130-4 & EN 55022) , FCC Part 15 & RoHS compliant, as per technical specification etc. as required.
19
-
-
... More
Supply, Installation, Testing & Commissioning of IP Network TDN Low-Light IR PTZ Camera with auto tracking, 1/1.9" CMOS, 2 MP @ 25fps, triple stream, Min. Illumination required 0.005 lux @ F1.6 (color) & 0.0005 lux @ F 1.6(B/W), 120dB True WDR, Min. Pixels 1920 × 1080, triple stream, 6mm –180 mm 30x motorized focus & zoom lens, BLC, HLC, 3DNR, Defog, Electronic Image Stabilitzation, Privacy Mask, IR range with 150mtr IR distance, Dual channel Audio G.711a/G.711u/AAC, 128GB SD card support, Alarm: 7 In/ 2 out, PoE, H.264 High Profile and MJPEG, PoE Class 5 and 12V DC/24VAC, IP 67, IK 10 vandal proof, Having Operating temp range : –40°C to 70° C. Certifications: ONVIF Profile S compliant, UL, CSA 60950-22, CE (EN 50130-4 & EN 55022) , FCC Part 15 & RoHS compliant. as per technical specification etc. as required.
6
-
-
... More
Supplying, installation, testing and commissioning of Client PC - Industry standard Intel based platform computer system. Intel Core i7 latest generation, 4 GB of RAM DDR3 ,1 TB SATA II hard drive for OS and VMS applications, NVidia card 1 GB graphics card , 1600 x 1200 or higher screen resolution, 1 X 1000Mbps ethernet network interface card ,16x DVD+/- RW Drive alongwith appropriate licenced Operating System, licenced applications suites from OEM and application licences as per the technical specifications etc. as required.
2
-
-
... More
Sec.3.0 Fire Detection & Alarm & Digital EVAC System
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections,interconnections as required
4 Zone
2
-
-
... More
Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required.
2
-
-
... More
Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.
21
-
-
... More
Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
2
-
-
... More
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S.box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.
2
-
-
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
450
-
-
... More
Sec.4.0 Access Control System
“Providing & erecting approved make Fingerprint and card based premium Door controller with LCD and Keypad having following features.”(A) Optical Fingerprint and card based Reader (Card personality Module not included) “(B) Dot – Matrix LCD and Touch sense Keypad “(C) Built-in interfaces like door lock, door sense exit Reader, Exit switch, Ethernet RS485, Aux Input & aux output port “(D) 5000 Events, access Control, Time Attendance, Tamper Detection “(E) 4 LEDS and Buzzer”
4
-
-
... More
“Providing & erecting approved make Card Reader having following features. “[A] Wiegand/ RS232 Interface “(B) Power supply from COSEC Door controller or through Separate Adaptor “(C) Compatible with any COSEC Door controllers “(D) 4 LEDs (Status, Alarm, Allowed and Denied) and Buzzer “(E) Tamper Detection”
4
-
-
... More
“Providing & erecting approved make Card Personality Module (CPM) having following features “(A) EM proximity Card Reader Module [Low Frequency] “(B) Compatible with any COSEC Door Controllers and COSEC Reader CA “(C) Supports EM Proximity Card”
1
-
-
... More
Providing & erecting approved make Application Software Platform for 500 User having following features “(A) With 100 Users “ (B) Expandable up to 500 Users with COSEC USER 100 “(C) Supports up to 16 Door Controller “(D) Basic Access Control Basic Time Attendance and Enrollment Management (E) Compatible with all COSEC Hardware “(F) Add Other COSEC software modules on requirement.
2
-
-
... More
Providing & erecting approved make Time Attendance Module (TAM) Having following features “(A) Comprehensive Time Attendance and Leave Management Software Module “(B) For 500 Users [AS per COSEC GE PLATFORM USERS] “(C) Attendance and leave Policy Creation “(D) Integration with payroll and HRM “(E) Shift Schedule, Holiday Schedule and Past Adjustment “(F) Manually Attendance Correction “(G) Leave/Tour Application and approval “(H) Report and Charts Generation
2
-
-
... More
“Providing & erecting approved make Access control Module (ACM) having following features (A) Comprehensive Access Control Management (B) For 500 Users [AS PER COSEC GE PLATFORM users] (C) Time, User and Zone Based Access Control (D) Access Zones, Access Modes and Access Levels (E) Advanced Access Control Feature like 2-person rule, First in user rule, Antipass Back, Guard Tour, Duress Detection and more (F) Various Reports Generation
1
-
-
... More
Sec.5.0 Cable TV Distribution System
Providing following type of Modular Type Accessories mounted with pvc / metallic box covered with appropriate front plate modules erected with necessary connection. As desired by Engineer In charge.
(4) TV Co-axial Socket outlet.
Cat. III.
4
-
-
... More
Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid bare copper insulated with Foam PE & Secondary conductor made of poly – Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with black PVC insulation. (b) RG – 6.
100
-
-
... More
Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid bare copper insulated with Foam PE & Secondary conductor made of poly – Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with black PVC insulation. (e) RG – 11.
50
-
-
... More
05. FIRE FIGHTING WORK
Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete. For 4.5 Kg Capacity
4
-
-
... More
Supply, installation, testing and commissioning of ABC type 6 kg Fire Extinguisher confirm to IS:15683, with ISI marked / TAC approved fitted with required accessories including wall suspension brackets.
10
-
-
... More
06-HVAC WORKS
Sec.2.0 Air Moving Equipment Supply, installation, testing and commissioning of cabinet type Floor Mounted / Loft Mounted Type single skinned Centrifugal Exhuast Air Unit; unit shall have leakproof canvass connection along with damper at suction side & descharge side cowl; ready to start unit hooked upwith 4P TEFC with IP 55 protection motor with pully / belt drive arrangement on adjustable frame; fan motor assembly mounted on corrossion proof-painted MS baseframe; baseframe to rest on vibration isolation pads. The unit shall be supplied with Starter Panel of required motor capacity.
35000 CFM / 40mm Static Pressure for STP
1
-
-
... More
Supply, installation, testing and commissioning of cabinet type Floor Mounted / Loft Mounted Type single skinned Centrifugal Exhuast Air Unit; unit shall have leakproof canvass connection along with damper at suction side & descharge side cowl; ready to start unit hooked upwith 4P TEFC with IP 55 protection motor with pully / belt drive arrangement on adjustable frame; fan motor assembly mounted on corrossion proof-painted MS baseframe; baseframe to rest on vibration isolation pads. The unit shall be supplied with Starter Panel of required motor capacity.
12500 CFM / 40mm Static Pressure for Kitchen
1
-
-
... More
Supply installation testing and commissioning of Air Washer.
GI Powder coated double skinned sandwitch insulated Sectionalized Fresh Air Units; shall have Fan Section having backward curved centrifugal fan+ suitable Pole TEFC motor + drive package, Washer section with Cell deck / equivalent air wash long life cooling pad media including manufacturer supplied water distribution pad system with 2 pass PVC eliminators, manifold, Fraction HP Pumps with motor, recirculation GI / PVC piping with valves, fittings / MS corrossion proof painted Storage Sump with overflow, makeup, drain & quickfill with Ball & Float Valve assembly / Intake Filter section of 20 micron with Intake Louvers, supply side GI Dampers & canvass connections, complete with starter panel for blower fan & pump including associated outgoing cabling; Unit shall have 90% air wash efficiency & 400 FPM face velocity with 10 mm WC drop across cooling media; motor shall be selected for following fan ratings w.r.t minimum 60% volumetric efficiency; units to be mounted on vibration isolation serrated rubber pads and completely leak proof construction.
Supply installation testing and commissioning of wall mounted IP 55 protection electrical starter panel for Humidifier Fan motor / Pump motors as composite unit including overload and short circuit protection, auto-manual provision, duly internally wired and tested; price shall include 10 rmt power cable of suitable size/rating from Panel upto Fan motor and Pump motors
10000 CFM / 50mm Static Pressure for Kitchen
1
-
-
... More
Sec.5.0 Ducting, Grills, Diffuser and Insulation DUCTING, GRILLS, DIFFUSER AND INSULATION
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular / round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.
Thickness 0.63 mm sheet
151.4
-
-
... More
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular / round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.
Thickness 0.80 mm sheet
212.86
-
-
... More
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular / round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.
Thickness 1.00 mm sheet
192.84
-
-
... More
Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular / round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.
Thickness 0.63 mm sheet
15
-
-
... More
Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular / round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.
Thickness 0.80 mm sheet
15
-
-
... More
Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular / round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.
Thickness 1.00 mm sheet
5
-
-
... More
Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc., as per specifications.
5
-
-
... More
Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.
6.55
-
-
... More
Supply & Installation of Under Deck Insulation with Class ‘O’ Nitrile Rubber with tough Aluminum foil facing & as per detail specifications - 25mm
250
-
-
... More
Sec.6.0 Air Cooled Variable Refrigerant system AIR COOLED VARIABLE REFRIGERANT SYSTEM
Supply, Installtion, Testing & Commissioning of Variable Refrigerant System.
Supply, Installation, testing and commissioning of Variable refrigerant volume system with Modular outdoor units having inverter driven multi scroll compressors (minimum two compressors) with one capacity controlling compressor and other constant speed type compressor working on R-410 A refrigerant, special pre- coated fins, panel, corrosion resistant (suitable for seaside installation) coated condenser, DC inverter based condenser fan M.S. hot dip galvanised stands / supports, electrical & microprocessor panel, isolating valves and all the necessary accessories for proper functioning of the units, having following capacities.
Supply, Installation, Testing, Commissioning of Variable Refrigerant System with all accessories
VRF Out-door Units 10.0 H.P.( 8.33 TR)
2
-
-
... More
Supply, Installtion, Testing & Commissioning of Indoor Units
Ceiling Suspended 4 way Cassette Compact Type unit with Cordless Remote Controllers
1.10 TR
4
-
-
... More
Supply, Installtion, Testing & Commissioning of Indoor Units
Ceiling Suspended 4 way Cassette Type unit with Cordless Remote Controllers
4.10 TR
1
-
-
... More
Supply, Installtion, Testing & Commissioning of Indoor Units
Ceiling Suspended Consealed type low static unit with Corded Remote Controllers
4.10 TR
2
-
-
... More
Supply, installation, Testing & Commissioning of Remote Controllers
Central Remote Controller suitable up to 20 H.P. system
1
-
-
... More
Supply, installation, Testing & Commissioning of Copper Refrigerant distribution joints Refnet joint suitable up to 6 H.P. Indoor units-( 4.8 TR )
4
-
-
... More
Supply, installation, Testing & Commissioning of Copper Refrigerant distribution joints Refnet joint suitable up to 8 H.P. Indoor units-( 6.40 TR )
1
-
-
... More
Supply, installation, Testing & Commissioning of Copper Refrigerant distribution joints Refnet joint suitable up to 10 H.P. Indoor units ( 8.0 TR )
1
-
-
... More
Supply, installation, Testing & Commissioning of Copper Refrigerant distribution joints Refnet distribution joint for 10 H.P. to 20 H.P.
2
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping beyond standard length For ductable A.C. Machine 18 Gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc.
1/4" O.D.
10
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping beyond standard length For ductable A.C. Machine 18 Gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc.
3/8" O.D.
15
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping beyond standard length For ductable A.C. Machine 18 Gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc.
1/2" O.D.
10
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping beyond standard length For ductable A.C. Machine 18 Gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc.
5/8" O.D.
10
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping beyond standard length For ductable A.C. Machine 18 Gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc.
3/4" O.D.
10
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping beyond standard length For ductable A.C. Machine 18 Gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc.
7/8" O.D.
7
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping beyond standard length For ductable A.C. Machine 18 Gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc.
1" O.D.
8
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping beyond standard length For ductable A.C. Machine 18 Gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc.
1-1/8" O.D.
5
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping beyond standard length For ductable A.C. Machine 18 Gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc.
1-3/8" O.D.
5
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping beyond standard length For ductable A.C. Machine 18 Gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc.
1-1/2" O.D.
5
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping beyond standard length For ductable A.C. Machine 18 Gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc.
1-5/8" O.D.
5
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping beyond standard length For ductable A.C. Machine 18 Gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc.
1-3/4" O.D.
5
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping beyond standard length For ductable A.C. Machine 18 Gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc.
2-1/8" O.D.
5
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping insulation For Suction line with following Thickness Nitrile rubber class 'O' insulation beyond standard length.
1/4" O.D. -13mm thick
10
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping insulation For Suction line with following Thickness Nitrile rubber class 'O' insulation beyond standard length.
3/8" O.D. -13mm thick
15
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping insulation For Suction line with following Thickness Nitrile rubber class 'O' insulation beyond standard length.
1/2" O.D. -13mm thick
10
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping insulation For Suction line with following Thickness Nitrile rubber class 'O' insulation beyond standard length.
5/8" O.D. - 19mm thick
10
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping insulation For Suction line with following Thickness Nitrile rubber class 'O' insulation beyond standard length.
3/4" O.D.- 19mm thick
10
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping insulation For Suction line with following Thickness Nitrile rubber class 'O' insulation beyond standard length.
7/8" O.D.- 19mm thick
7
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping insulation For Suction line with following Thickness Nitrile rubber class 'O' insulation beyond standard length.
1" O.D. - 19mm thick
8
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping insulation For Suction line with following Thickness Nitrile rubber class 'O' insulation beyond standard length.
1-1/8" O.D. - 25mm thick
5
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping insulation For Suction line with following Thickness Nitrile rubber class 'O' insulation beyond standard length.
1-3/8" O.D.- 25mm thick
5
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping insulation For Suction line with following Thickness Nitrile rubber class 'O' insulation beyond standard length.
1-1/2" O.D.- 25mm thick
5
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping insulation For Suction line with following Thickness Nitrile rubber class 'O' insulation beyond standard length.
1-5/8" O.D.- 25mm thick
5
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping insulation For Suction line with following Thickness Nitrile rubber class 'O' insulation beyond standard length.
1-3/4" O.D.- 25mm thick
5
-
-
... More
Supply, installation, Testing & Commissioning of the following components for VRF system
Extra charges for the refrigerant piping insulation For Suction line with following Thickness Nitrile rubber class 'O' insulation beyond standard length.
2-1/8" O.D.- 32mm thick
5
-
-
... More
Supply, installation, testing & commissioning of control and communication cabling between the indoor and outdoor units in the rigid PVC conduit.
2 core x 1 sq.mm steel braided twisted shielded wire
100
-
-
... More
Sec.7.0 Miscelleneous Works
SITC of Rigid PVC drain piping of 10 Kg / Sq. Cm. of pressure rating for the units with insulation as per specifications and suitable for following pipe sizes.
19 mm Dia.
25
-
-
... More
SITC of Rigid PVC drain piping of 10 Kg / Sq. Cm. of pressure rating for the units with insulation as per specifications and suitable for following pipe sizes.
25 mm Dia.
20
-
-
... More
SITC of Rigid PVC drain piping of 10 Kg / Sq. Cm. of pressure rating for the units with insulation as per specifications and suitable for following pipe sizes.
32 mm Dia.
15
-
-
... More
SITC of Rigid PVC drain piping of 10 Kg / Sq. Cm. of pressure rating for the units with insulation as per specifications and suitable for following pipe sizes.
40 mm Dia.
10
-
-
... More
Supply, installation, testing, commissioning &
Providing and erecting Inverter based approved make split air-conditioning unit consisting of condensing unit with variable speed fan motor, inverter type hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of proper insulated copper tubing up to 5 RMT suitable for (Cost includes M.S. Stand, Gas Charging & Internal Copper Wiring & Remote Control)
1.5 TR Capacity
1
-
-
... More
Supply, installation, testing, commissioning &
Providing and erecting Inverter based approved make split air-conditioning unit consisting of condensing unit with variable speed fan motor, inverter type hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of proper insulated copper tubing up to 5 RMT suitable for (Cost includes M.S. Stand, Gas Charging & Internal Copper Wiring & Remote Control)
2.0 TR Capacity
1
-
-
... More
Supply, installation, testing and commissioning of 6 body Mourtury chamber of SS/SS fininshed as per specification.
4
-
-
... More
07.00 Kitchen Equipments
Supplying, installing, testing and commssioning Weighing Scale (RA01) (Floor Model) of 500 kg capacity as per technical specification.
1
-
-
... More
Providing and installing 2 Sink Unit (RA02) of size 1200 x 600 x 850 + 100 as per technical specification.
1
-
-
... More
Providing and installing Support table with u/s and splash back (RA03 & TA03) of size 600 x 600 x 850 + 150 as per technical specification.
1
-
-
... More
Providing and installing Plattform trolly (RA04) of size 1000 x 600 x 900 as per technical specification.
1
-
-
... More
Providing and installing SS Dunnage rack (ST01) of size 1200 x 600 x 300 as per technical specification.
3
-
-
... More
Providing and installing St. Steel Storage Rack (4-Shelves) (ST02) of size 1100 x 550 x 1650 as per technical specification.
6
-
-
... More
Providing and installing St. Steel Storage bins on Wheels (ST03) 1100 x 550 x 1650 of size 450 x 450 x 750 as per technical specification.
5
-
-
... More
Supplying, installing, testing and commssioning Walking cooler(Mac-Bluestar or equivelant)(CS01) of Size 3000 x 2425 as per technical specification.
1
-
-
... More
Providing and installing St. Steel perforated Storage Rack (4-Shelves) (CS02) of size 1100 x 550 x 1650 as per technical specification.
6
-
-
... More
Providing and installing onion potato bin fifo type (WT01) of size1200 x 600 x 1200 as per technical specification.
1
-
-
... More
Supplying, installing, testing and commssioning Potato Peeler (WT02) of 20 KG Capacity as per technical specification.
1
-
-
... More
Supplying, installing, testing and commssioning Pulverizer (WT03) of 3HP Capacity as per technical specification.
1
-
-
... More
Supplying, installing, testing and commssioning Masala grinder (Tilting type) (WT04) of 10L Capacity as per technical specification.
1
-
-
... More
Providing and installing Single sink unit (WT05) of size 600 x 600 x 850 + 100 as per technical specification.
1
-
-
... More
Supplying, installing, testing and commssioning Dough kneading machine (WT06) of 25kg Capacity as per technical specification.
1
-
-
... More
Supplying, installing, testing and commssioning 2 Door vertical refrigerator (VC01) of 500L Capacity as per technical specification.
1
-
-
... More
Supplying, installing, testing and commssioning 4 Door vertical freezer (VC02) of 1000L Capacity as per technical specification.
1
-
-
... More
Providing and installing work table with sink and u/s (VC03) of size 2200 x 600 x 850 as per technical specification.
1
-
-
... More
Providing and installing Work table work table with u/s and splashback (VC04) of size 1600 x 600 x 850 + 150 as per technical specification.
1
-
-
... More
Supplying, installing, testing and commssioning VEG. Cutting chopping machine (VC05) of 110kg/hr Capacity as per technical specification
1
-
-
... More
Providing and installing Work table with sink , u/s and splashback (VC06 & CK06) of size 1600 x 600 x 850 + 150 as per technical specification.
2
-
-
... More
Providing and installing Kitchen utility trolly (VC07) of size 900 x 500 x 900 as per technical specification.
2
-
-
... More
Supplying, installing, testing and commssioning Pizza make line under counter refirgerator (CK01) of size 1800 x 600 x 850 as per technical specification.
1
-
-
... More
Supplying, installing, testing and commssioning Citrus Juicer (CK02) of 250ml/ charge Capacity as per technical specification
1
-
-
... More
Supplying, installing, testing and commssioning Double deck sandwich griller (CK03) of size 600 X 330 X 300 as per technical specification.
1
-
-
... More
Providing and installing Wall mounted shelf (CK04) of size 1800 x 300 x 250 as per technical specification.
2
-
-
... More
Supplying, installing, testing and commssioning Hard fruit juicer (CK05) of 250ml/ charge Capacity as per technical specification
1
-
-
... More
Providing and installing Work table with u/s and splashback (CK07) of size 1500 x 600 x 850 + 150 as per technical specification.
1
-
-
... More
Supplying, installing, testing and commssioning Conveyor type toaster machine (CK08) of 300slices/hr Capacity as per technical specification.
1
-
-
... More
Providing and installing Worktable with sink,u/s and splashback (TA01) of size 1800 x 600 x 850 + 150 as per technical specification.
1
-
-
... More
Supplying, installing, testing and commssioning Idili Steamer (TA02) of 180idlli Capacity as per technical specification
1
-
-
... More
Supplying, installing, testing and commssioning Two Burner Indian cooking range (TA04) of size 1200 x 600 x 750 as per technical specification.
1
-
-
... More
Supplying, installing, testing and commssioning Dosa plate(hot plate) (TA05) of size 900 x 600 x 850 as per technical specification.
1
-
-
... More
Supplying, installing, testing and commssioning Single burner indian cooking range (BK01) of size 600 x 600 x 500 as per technical specification.
4
-
-
... More
Providing and installing Worktable with sink,u/s and splashback (BK02) of size 1200 x 600 x 850 + 150 as per technical specification.
1
-
-
... More
Providing and installing Side table with u/s and splashback (BK03) of size 500 x 600 x 850 as per technical specification.
6
-
-
... More
Supplying, installing, testing and commssioning Kadai fryer (BK05) of size 600 x 600 x 850 as per technical specification.
1
-
-
... More
Supplying, installing, testing and commssioning Chapati plate puffer (BK06) of size 1500 x 600 x 850 as per technical specification.
1
-
-
... More
Providing and installing Support table with u/s (BK07) of size 1500 x 600 x 850 as per technical specification.
1
-
-
... More
Providing and installing Marble top chapati rolling table (BK08) of size 1500 x 600 x 850 as per technical specification.
1
-
-
... More
Providing and installing masala trolly with 8Nos 1/6GN pan (BK09) of size 850 x 500 x 900 as per technical specification.
1
-
-
... More
Providing and installing Hand wash senitizer sink (BK10) of size 600 x 450 x 330 + 150 as per technical specification.
1
-
-
... More
Providing and installing thali counter with 1Nos ambient 1/1 GN Pan, servies rail and sneeze guard (SR02) of size 1100 x 650 + 300 x 850+450 as per technical specification.
2
-
-
... More
Providing and installing Bain marie with 4Nos hot 1/1 GN pan, 1Nos ambient 1/1 GN pan,service rail and sneeze guard (SR03) of size 1800 x 650 + 300 x 850+700 as per technical specification.
2
-
-
... More
Providing and installing Hot display counter (SR04) of size 1220 x 650 x 1320 as per technical specification.
1
-
-
... More
Providing and installing GN Pan trolly Cap-1/1GN pan (12Nos) (SR05) of size 750 x 630 x 1200 as per technical specification.
1
-
-
... More
Supplying, installing, testing and commssioning VISI cooler (Celfrost or equivalent make ) (SR06) of capacity 320L as per technical specification.
1
-
-
... More
Supplying, installing, testing and commssioning Deep freezer (SR07) of capacity 280L as per technical specification.
1
-
-
... More
Providing and installing Back up table with u/s and splashback (SR08) of size 1200 x 600 x 850 + 150 as per technical specification.
1
-
-
... More
Providing and installing Back up table with u/s and splashback (SR09) of size 1800 x 600 x 850 + 150 as per technical specification.
1
-
-
... More
Providing and installing SS Hand wash sink (HW01) of size 1200 x 450 x 350 + 50 as per technical specification.
1
-
-
... More
Providing and installing SS Hand wash sink (HW02) of size 1500 x 450 x 350 + 50 as per technical specification.
1
-
-
... More
Supplying, installing, testing and commssioning Water cooler (HW03) of capacity 80L as per technical specification.
1
-
-
... More
Providing and installing Soiled dish table with scraping hole (DW01) of size 1800 x 750 x 900 as per technical specification.
1
-
-
... More
Providing and installing Two sink pre-wash unit (DW02) of size 1800 x 750 x 900 as per technical specification.
1
-
-
... More
Providing and installing Pre-rinse shower (DW03) as per technical specification.
1
-
-
... More
Supplying, installing, testing and commssioning Hood type dish washer machine (Electrolux or equivalent make) (DW04) of capacity 80rack/ hr as per technical specification.
1
-
-
... More
Providing and installing Clean dish landing table (DW05) of size 1200 x 750 x 900 as per technical specification.
1
-
-
... More
Providing and installing Clean dish storage rack (DW06) of size 1100 x 550 x 1650 as per technical specification.
2
-
-
... More
Providing and installing SS pot rack (PW02) of size 1200 x 600 x 1650 as per technical specification.
1
-
-
... More
Providing and installing SS Drain trough with perforated basket and pipe gratings (FD01) of size 1200 x 300 x 100 as per technical specification.
11
-
-
... More
Providing and installing SS Drain trough with perforated basket and pipe gratings (FD02) of size 900 x 300 x 100 as per technical specification.
10
-
-
... More
Supplying, installing, testing and commssioning Hosereel (FD03) of capacity 15m as per technical specification.
1
-
-
... More
Supplying, installing, testing and commssioning Exhaust Hood with Baffle filter, fresh air grill and LED Lights (EX01) of size 1725 x 1100 x 500 as per technical specification.
8
-
-
... More
9.00 Furniture Works
Providing and arranging in position cafe chair of UNWIND of Godrej or equivalent. Chair shall be made of MS Powder Coated (50 micron) Understructure (Without Arms) and the seat and back are made of injection moulded high impact strenght polypropylene polymer compound with indoor graade UV Resistance. The Shoes are made of high impact strenght polypropylene polymer compond with indoor grad UV Resistance and pressed fitted with tubular fram. Approximate size of chair is 520mm (W) x 550 mm (D) x 850mm & 450mm (H).
144
-
-
... More
Café table - 6 seater - 2100mm Providing and arranging in position a 6 seater cafe dining table of 1800mm x 900mm x 750, Work Surface 25mm Thick (+/-1mm), Base Material 25mm MDF Board, on top PU Painting of Minimum 2H hardness with 75% gloss. Understructure shall be made of MS Powder coated pipe dia 38mm, 2mm thk and fitted PU top and SS member with SS machine screw.
24
-
-
... More
BOQ-2 - From It.No. 705 to It.No 708 Buy Back of DG Set
Buy back of following DG set along with panel, complete with all accessories etc. including dismantling, take away, transportation , loading unloading etc. complete as required.
DG-1 – 320KVA Sudhir genset, IP23, 2007 manufacturing
Engine Make: CUMMINS INDIA LTD.
Engine No:25327444
Model No:NTA855- G2-1
Date of mfg: 11-2007
Advertised HP 380 At 1500 RPM
AC Generator
Make: STAMFORD
Type:HC1444E1
Serial No: 07120944
AVR: AS440, KVA:320, Volts:415, Amps:445
HZ:50, Phase:3
PF:0.8, RPM:1500
Str. Wdg: 311, Str. Con: S. Star
Rating: Cont, Ambient Temp:40 C
Enclosure: IP23
Excitation Volts:48
Amps: 2.30
Ins. Class: H
1
-
-
... More
Buy Back of DG Set
Buy back of following DG set along with panel, complete with all accessories etc. including dismantling, take away, transportation , loading unloading etc. complete as required.
DG-2 – 320KVA Sudhir genset, IP23, 2008 manufacturing
Engine Make: CUMMINS INDIA LTD.
Engine No:25337086
Model No:NTA855- G2-1
Date of mfg: 3-2008
Advertised HP 380 At 1500 RPM
AC Generator
Make: STAMFORD
Type:HC1444E1
Serial No: N08H25175
AVR: AS440, KVA:320, Volts:415, Amps:445
HZ:50, Phase:3
PF:0.8, RPM:1500
Str. Wdg: 311, Str. Con: S. Star
Rating: Cont, Ambient Temp:40 C
Enclosure: IP23
Excitation Volts:48
Amps: 2.30
Ins. Class: H
1
-
-
... More
Buy Back of DG Set
Buy back of following DG set along with panel, complete with all accessories etc. including dismantling, take away, transportation , loading unloading etc. complete as required.
DG-3 – 320KVA Sudhir genset, IP23, 2015 manufacturing
Engine Make: CUMMINS INDIA LTD.
Engine Model:QSL9-G15
Rated KWm/HP: 298/399 @ 1500RPM
Date of mfg: 09/07/2015
SO No:63119
AC Generator
Make: STAMFORD
Type:HC1444E1
Serial No: N15F268440
AVR: NONE, KVA:320, Volts:415, Amp:445.2
HZ:50, Phase:3
PF:0.8, RPM:1500
Str. Wdg: 311, Str. Con: S. Star
Rating: Cont, Ambient Temp:40 C
Enclosure: IP23
Excitation Volts:48
Amps: 2.30
Ins. Class: H
1
-
-
... More
Buy Back of DG Set
Buy back of following DG set along with panel, complete with all accessories etc. including dismantling, take away, transportation , loading unloading etc. complete as required.
DG-4 – 200KVA Sterling Generators Pvt. Ltd., 2013 manufacturing
Genset Model: SGN200PR
Engine Sr. No: GO13ZE0060
Alternator Sr. No:LDS3L613F171336
Year Of Mfg:2013
Power Factor:0.8
Rated KVA:200
Rated KW: 160Full Load Current(0.8pf) Amps: 278.2
Rated Voltage- Volts: 415V
Frequency:50HZ
Rated RPM:1500RPM
Battery Voltage-VDC:24VDC
Panel Type:315A SEREIS-2200
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements