UT Administration Of Dadra And Nagar Haveli Tender

Providing and laying asphalt painting on paver surface with VG-30 (80/100) penetration bitumenat the rate of 7.5kg/10 sq.mt. and spreading of stone dust on painted surface at therate of 0.08 cu.mt./10 sq.mt. including cleaning etc. complete

Providing and laying of Hot applied Thermoplastic compound 2.5 mm thick including Reflectorising Glass Beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35 & finished surface to be level, uniform and free from streaks and holes.

Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for culverts carrying heavy traffic as per IS 458-1991 specifications including setting the pipes in C.M. 1:2 watering and laying (to level or slopes) of class NP3 of following internal daimeters.(iii) 600mm dia. (more than 10 ton)

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil.

Providing, laying spreading Wet Macadam(150mm) thick in base course by mechanical mean and compacted graded stone aggregates by using 40mm machine crushed black trap metal at a rate of 0.40Cu.mt/10Sq.mt, 20mm nominal size machine crushed metal to be used at a rate of 1.35Cu.mt/10Sq.mt, 10mm nominal size machine crushed metal to be used at a rate of 1.20Cu.mt/10Sq.mt coarse sand to be used at a rate of 0.60Cu.mt/10Sq.mt and stone dust to be used at a rate of 0.40Cu.mt/10Sq.mt to wet mix design specification including pre-mixing the material with water to OMC in mechanical mixture (wet mix macadam plant) including carriage of mix material by tipper to the site of work etc. complete as per Most specification and directed by engineer-in-charge.

Supplying and fixing cat eye (Stimsonite) made out from Acrilo beautile sterine injuction high compressed molding with reflector made of MMC (prismatic type of size 12cm x 6cm x 2.5cm) provided with bituminous adhesive 100g. with each unit for fixing. (High Intensity grade)

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- crushed stone aggregates 20 mmnominal size) and curing complete including cost of formwork in (A) Foundation and Plinth

Providing material and labour for laying cement concrete 1:1 ½ :3 ( 1 cement :1 ½ coarse sand :3 graded stone aggregate 20mm nominal size and curing complete including cost of form work and reinforcement for reinforced cement concrete work in foundation, footing, base of columns and mass concrete.

Providing material and labour for laying cement concrete 1:1 ½ :3 ( 1 cement :1 ½ coarse sand :3 graded stone aggregate 20mm nominal size and curing complete including cost of form work and reinforcement for reinforced cement concrete work in Vertical surface such as wall.

Providing material and labour for laying cement concrete 1:1 ½ :3 ( 1 cement :1 ½ coarse sand :3 graded stone aggregate 20mm nominal size and curing complete including cost of form work and reinforcement for reinforced cement concrete work in Slab.

Providing material and labour for laying cement concrete 1:1 ½ :3 ( 1 cement :1 ½ coarse sand :3 graded stone aggregate 20mm nominal size and curing complete including cost of form work and reinforcement for reinforced cement concrete work in Beam and Kerb.

Providing and fixing pre-cast Rubber Dye inter locking concrete block 60mm thick with grade of concrete M200 pnumatic compressed by mechanically pressed and as per approved design including 75mm Sand layer for levelling and filling the joint with sand in proper line and level etc complete.

Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for culverts carrying heavy traffic as per IS 458-1991 specifications including setting the pipes in C.M. 1:2 watering and laying (to level or slopes) of class NP3 of following internal daimeters.(iii) 900mm dia. (more than 10 ton)

Earthwork for embankment including breaking clods, dressing with all lead and lift (excluding watering and consolidation)(A) From Borrow pits within land width

Providing TMT Bar FE 415 reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level (upto 10 ton)

Providing material and labour for filling in Plinth WITH UNSCREEN GRAVEL under Floor including, watering, ramming, Consolidating and dressing etc. complete.

Providing, laying, spreading and compacting specified graded stone aggregates Using machine crushed metal 40mm to 63mm size at a rate of 0.50 Cu.mt./10 Sq.mt. 22.4mm to 40mm Machine crushed blast trap metal at a rate of 0.25 Cu.mt./10 Sq.mt., 5.60mm to 22.4mm Machine Crushed metal at a rate of 0.75 Cu.mt./10 Sq.mt. and natural sand having 5.60mm to 75mm micron to be used a rate of 1.80 Cu.mt./10 Sq.mt. in sub base course 0.25 Cm. thick including premixing the material at OMC in mechanical mixture including carriage of mix material by tipper to at site of work, spreading in uniform in two layer with motor grader for sub-base & compacting with vibratory roller to achieve the desired density (as per design and mix determined density) including all require materials, labour machinery, lighting, guarding, barricading etc. complete as per most specification and as directed by Engineer in charge.

Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for culverts carrying heavy traffic as per IS 458-1991 specifications including setting the pipes in C.M. 1:2 watering and laying (to level or slopes) of class NP3 of following internal daimeters.(iii) 1200mm dia. (more than 10 ton)

Provldlng and supplying and Laying in standard length lsl mark rlgld unplastlcised PVC pipes suitable for potable water with rlngflt jolnt lncludlng cost of rlngs, as per lS specificatlon no.4985/1988 lncludlng all local and central taxes, transponation, freight charges, octroi,inspection charges, loading, [rnloading, conveyance to the departmental stores and includlno cost of iointino meterlal etc, comolete -4 kg /cm2,110 mm dia.

Providing and laying 40mm thick compacted I.e. 55mm loose bituminious macadam with tack coat at 5.00 Kg./10 Sq.mt. Using stone chips as per gradation VG-30 (60/70) and asphalt at the rate of 4.00 % by weight of aggregates mix by hot mix hot laid process including consolidation providing and operating required plant machinery coat of fuel and lubricant labour charges etc. in requires grade and chamber including cleaning including cleaning the surface etc. complete.

Providing andLaying in position M-30 grade Trimix for reinforced cement concrete work using cement concrete as per approved mix design of specified grade for reinforced cement concrete work including floter dewatering skeed vibrator v groove etc of site of laying including the cost of channel centering shuttering finishing.

Earth work in cutting in in all sorts of soil and soft murrum including conveying and spreading the stuff embankment as and where direct within 200mt. From the end of the cutting with all required lead and lift.