UT Administration Of Dadra And Nagar Haveli Tender

Brick work using common burnt clay building ricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement ortar 1:6 (1- Cement : 6 -fine sand)(B) onventional (more than 10 ton) Extra for brick ork in superstructure above plinth level upto floor wo level (B) Conventional

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit

Providing and laying 24" x 24" vetrified 8mm thick over 12mm thick bed of cement mortar in 1:3 (1 cement: 3 coavse sand) in skirting risers of steps and dedo by adhesive material including dismentalling of existing surface and jointed with colour cement slurry including finished with flush painting & cleaning the surface etc complete for light/Dark shade as directed, Engineer in charge.

Providing and fixing window having extruded aluminum Colour Powder Coated section frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member size 92mm x 31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc

Providing material and labour for fixing Powder coated Alluminium DOOR with pipe section 63mm x 38mm x 1.63 mm including glazing clips and 25mm x 25mm x 1.80 mm having cross section C/C not more than 0.7 x 1.00 meter and using Hardnersheet / Modi Glass 4mm thick fitting with rubber gasket and other fixture and fastening and Door closer etc. complete as directed by Engineer in charge.

Providing material and labour charge for fixing POWDER COATED ALLUMINIUM PARTITION with Pipe section 63mm x 38mm x 1.63 mm including glazing clips and 25mm x 25mm x 1.80 mm having cross section C/C not more than 0.5 x 1.00 meter and using Hardener sheet 4mm thick fitting with rubber gasket and other fixture and fastening etc. complete as directed by Engineer in charge.

Providing and fixing single layer waterproof gypusm board 12.5mm thick of the make newgood Grroup Co. Ltd. Or equivalent & Newgood Group Co. Ltd. Company sections using waterproof board of size 1220mm x 1830mm x 8.0mm suspended by G.I. Suapender of size 25mm x 3mm with intermediate channel of size 18mm x 40mm x 0.80mm at 1220mm center to center ceiling section of size 40mm x 35mm x 0.55 mm at 457mm center to center and perimetre chanel A of Size 20mm x 27mm x 30mm x 0.50mm at edges & drops including paper tap sand sofit cleat, anchor fastener, scoch bolt connecting cleat joining compound top coat on ceiling including making necessary opening for fitting, diffuser etc. complete as per detail drawing as directed.

Supply ofchairs Wipro Annexe model No.ANV0072 23, 12mm ply with 30 & 40mm cushion for seat & back repectively with sparking silver powder coated. A legged base 12mm MFD membrane table with die cast aluminum bracket as approved by an Engineer incharge. (Godrej,Wipro, Durian make).

Providing and Fixing Projector with screen & sound Ultra short throw projector with 3300 Lumens HDMI Port, VGA Port, USB Projector Lamp-UHP, Projector Screen (6"x 8 ") auto lock (Wall mount screen), Multimedica speaker (Ahuja/Boss) (10 Watts Wallmount Speaker), Cordless & Mini colr mic (Ahuja/Boss), Amplifire (250 Watt) (Ahuja/Bass), Audio Cable 3.5mm, Projector Ceiling Stant regular, VGA Cable (Standard Quality), HDMI Cable (standard Quality).

Providing and erecting 3 star and above rated approved make Split Air conditioning unit consiting of condensing unit with fan motor, hermetically sealed rotary compressor with accessories etc. duly connected separately erected evapoorating unit and blower motor with its accessories by means of proper insulated copper tubing upto 5 RMT suitable for (Gost includes M.S. Stand, Gas charging & Internal copper wiring and Remote control) (B) For 2 ton Capacity.

Providing material & labour fo Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete

Providing and fixing sheet glass ordinary quality plain glass bidding in M.S. window front & back puttied & sprigged or fixed with glazing pins and necessary cutting of glass 4mm thick.

Providing material & labour for fixing mosquito jali made of stainless steel 304, 20 guage wire for Door, Windows & clearstory windows with necessary screws after removal of the existing Galvanized M.S. wire Jali including fixture & fastening etc. complete as directed by Engineer in charge.

Providing material and labour for fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws, with Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS :2046 Type S, including cost of adhesive of approved quality 1.0mm Thick on both face, with Providing and fixing S.S. tower bolts (barrel type) with necessary screws etc 200mm long x10mm dia, with Providing and fixing S.S. Door Aldrop with necessary screws etc. 300mm long x16mm dia, Providing and fixing S.S. Door Aldrop with necessary screws etc 250mm long x16mm dia, with Providing and fixing S.S. Pipe Handle for door 30cm size on both side of Door shutter, with Providing and fixing S.S hanging type floor door stopper with necessary screws, etc. complete as directed by Engineer in charge. All S.S Shall be ASIS 304 Grade.

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken stone aggregates 40 mmnominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth.

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick

Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete.

Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork and excluding the cost of reinforcement for reinforced concrete work in Walls upto and above floor two level, etc complete as directed by engineer-incharge.

Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork and excluding cost of reinforcement for reinforced concrete work in (C) Slabs, landing, shelves and Cantilever upto floor two level, etc complete as directed by engineer-incharge.

Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork and excluding cost of reinforcement for reinforced concrete work in Lintels, Beams, Girders and Cantilever upto floor two level etc complete as directed by Engineer-incharge.

Providing TMT Bar FE 415 reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level.

Providing and casting in situ ordinary cement concrete M-150 for Kerbs / kerb blocks including formwork, curing and finishing complete. (upto 10 ton)

Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar.

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 500 Meter lead.(B) Dense or Hard soil

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional (upto 10 ton)

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering.

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and consolidating etc. complete.

Providing and laying rubble for appron (each stone weighting not less than 40Kg.) including and packing and filing in the interestices with quarry-spalls.

Pointing on Uncoursed stone masonry with cement mortar 1:3 (1-cement : 3-coarse sand) (A) Flush pointing

Providing and fixing to wall celing and floor 6.0 Kg/cm2 working pressure polythene pipe of the floowing outside dia low density pipes complete with special flage compression type compete with special flage compression type fitting, wall clips etc. including making good the wall ceiling and floor. (E) 110MM dia.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete.

Providing material and labour for 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.