UT Administration Of Dadra And Nagar Haveli Tender

Filling in foundation and plinth with rubble soiling in layers of 20cm. thickness including watering, ramming and consolidating etc. complete.

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in Foundations, footings, Base of columns and Mass concrete as per direction of the Engineer - in - charge.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in Ground Beams & Plinth Beams.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts, upto plinth level

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in Slab Beams, cantilever beams. Upto floor two level

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in Slabs, landings, shelves, balconies and cantilever slabs.(upto floor two level)

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (D) Columns (upto floor two level)

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (C) Chajja and lintel (upto floor two level)

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete. (upto floor two level)

Providing fusion bonded Epoxy coating not less than 175 micron thickness and up to 300 micron to reinforcement bars as per IS-13620-1993/ASTM-775 M including testing of coating at plant and all taxes (A) 10mm to 16mm dia bar. (upto floor two level)

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional.

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. upto floor two level in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering and including to groove super structure upto all floor level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete EIC

Providing and laying mirror polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick

Providing and laying cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge. - With average thickness of 120 mm and minimum thickness at khurra as 65 mm. all complete as directed by engineer incharge.

Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emultion paint on wall surface (two coats) to give an required shape even shade after throughly brushing the surface to remove all dirt, and remains of loose powered materials. Etc Complete.

Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member size 92mm x 31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc (s.s mosquito net may be fixed as per directed)

Providing and fixing M.S. round or square bars with M.S.flats at required spacing of windows and clerestory windows. (MS GRILL)Complete of EIC/AS per drawing

Applying general insecticide pest control treatment to floors ,cupboards,plinth,walls etc including labour material etc. complete. Using heptachloride 20 EC. As per 6113_pest Consentration Weight 0.50 percent is recommended one litre chemical emulison dillute with 39 litre of water will give . total dillute concrentration will be 40 litre inclusive of one litre chemical emulsion appication 0.5 /litre chemical/sqm of surface is recommended as per is including rate in plinth

Providing drip course groove/ pointing in plastered surface or moulding to R.C.C projection as per drawings/directed by EIC/Architect.

Constructing Brick masonry road chamber 500mm x 450mm x 600mm including 500mm x 450mm C.I. horizontal grating wih frame complete. (upto 10 ton)

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing Plinth Protection on Proposed Building Side 1.00mt. Width, With Excavation 0.48mt deep, Murrum Filling 0.15mt., GSB 0.23mt., & PCC 1:2:4 0.10mt. Including Ramming, Curing etc. Complete.

PVC SWR pipes IS 13592 for Drain - 110 mmdia

Construction Of RAIN WATER HARVESTING PIT (Pit size 1.20mt. X 1.20mt x 2.70mt. Deep)

Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar.

Preparing surface by Brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunney bags to remove all loose dirt etc.(i) Water bound macadam surface (New)

Preparing surface by Brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunney bags to remove all loose dirt etc.(i) Water bound macadam surface (New)