UT Administration Of Dadra And Nagar Haveli Tender

ACP-Providing And Fixing Aluminium Composite Panels (ACP) Of Exterior Grade For Cladding Exterior Area Of Panipuri Stall Of Alucobond / Alstrong / Eurobond Or Approved Equivalent Make In Combination Of Solid/As Per Design Details Or As Directed By Engineer In Charge,Including All Necessary Frame Work And Complete Weather Sealing. -The Composite Panel Should Consist Of 2mm Thermoplastic Core Of LDPE Sandwiched Between 2 Skins of 0.5mm Thick Aluminium Sheet (Alloy Designation 310S) Making a Total Panel Thickness Of 3mm With Lumiflon Based Flourcarbon Coating On Top Sides And Service Coating On Reverse Side.The System Shall Be Fixed Using GI Brackets And Stainless Steel Bolts And Nuts Complete With Spring Washers And Cap Nuts And All Other Necessary Accessories. All The Egdes Must Have Sealed With Silicon Sealent Of Approved Colour. -All Hardware Shall Corrosion Resistant Frame Out Of Anodised Aluminium/GI Member. - Only Installed Surface Area Will Be Measured For Payment.As Per Directed By Engineer In Charge Complete.

Providing And fixing 2mm thick Vinyl Backed Wall Paper Over Existing Wall smooth plaster finish/pop Punned Masonary wall/laminate/gypsum/mdf/plywood surface as per the details drawings adhering to Architects insrtuction.The vinyl backed wall paper shall be fixed to pattern as per details drawings.The wall paper if fixed over pop punned masonary walls/gypsum/mdf/plywood surface then base surface should be properly finished with two coats of under coats,primer coat,full putty,lambi,sanded and smooth wave free finished surface- as per directed by Engineer in Charge.Complete.(Basic Rate=120/sqft).

Providing Material And Labor For Structural Steel Work (Confirming To IS 4923-1997) Riveted, Bolted Or Welded In Builtup For All Type Sections, In Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying a Paint & Priming Coat Of Approved Steel Primer & Paint All Complete As Per The Structural Designs And As Directions Of Engineer in Charge Complete.

Providing Material & Labour for Internal Wall Painting (Two Coats) with Lustre Paint of approved brand and manufacture including primer coat on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. as directed by engineer in charge complete. Paint should be washable grade Make: Jotun JollyFix, Asian Paints Royale, Berger Paints - Bison Glow, Dulux Paints -SuperClean or Equivalent.

Providing And Applying Decorative Paint Weather Proof Exterior Emulsion (Water Based 100% Acrylic) Or Approved Equivalent Grade Paint To All Type Of Cement Plasters, Concrete,Exterior Ceiling Etc. Or Surface / Sub Straits(Which Are Subjected To Continuous Seepage And Dampness.The Surface To Be Painted Shall Be Made Free From Any Loose Paint,Dust,Grease And Any Fungus, Algae Or Moss, On It Shall Got Be Removed Thoroughly By Vigorous Wire Brushing And Cleaning With Water. Then One Coat Of Exterior Grade Wall Primer Be Applied After Which Any Surface imperfection Such As Holes, Dents, Fine Cracks Shall Be Corrected By Filling With External Wall Putty. There After Second Coat Of Exterior Grade Wall Primer And Again Surface imperfection To Be Corrected. Thereafter Apex Weatherproof Exterior Emulsion Paint To Be Applied in Two Coats.The Rate includes Cost Of All Materials, Labour,Scaffolding,Ladders Charges,Storing & Safeguarding.As Directed By Enginner -In -Charge Complete. Make :-Asian/ British/Nerolac OR Equivalent.

Providing and application of decorative Vinyl stickers of high-quality that conforms well to curves and irregular surfaces, and has a long lifespan (up to 10 years) having 0.5MM thickness on ACP Application over ACP surface must be done using Permanent Adhesive that creates Strong bond, suitable for long-term applications & should not leave residue at the time of removing. Surface finish shall be matte that offer a non-reflective and smooth finish. It must be UV resistant to prevent fading, Water-resistant and Chemical resistant. It should be Available in a wide range of colors and must be suitable for digital or screen printing. Printing to be done as per the design approved by Architect. For Application on ACP Surface Preparation must be done by Cleaning the aluminum surface thoroughly with a solvent like isopropyl alcohol to remove any dirt, grease, or oil and Ensure the surface is dry and free from dust. Apply in a dust-free environment with Ideal application temperature ranges from 50°F to 90°F (10°C to 32°C). Avoid extreme temperatures. Proper Maintenance and Care shall be done till the time of handover by Regularly cleaning the vinyl surface with a mild detergent and water solution and periodically inspecting for any signs of lifting or wear, especially on edges and corners. Cost shall include the cost of staging, scaffolding, etc required exection and completion of work in all respect as per the instruction of engineer-in-charge or architect.

Providing material and labour for Painting Decorative type theme based paint on metal surfaces with two coat of premium enamel paint and one coat of primer to Give An Even Shade as per approved design provided by Architect in Two Or More Coat Applied @ 0.90 Lit/10 Sqmt. Over An Under Coat Of Primer Applied @ 0.80Lit/10 Sqmt. Of Approved Brand And Manufacture As Per Directed By Engineer in Charge Complete.For Railing and Roof sheet bottom Make :-Asian/ British/Nerolac OR Equivalent.

Providing ,Supply,Installation,READYMADE FRP SECURITY CABIN SIZE"-(4'-0"X6'-0"X8') Material: Fiber Reinforced Plastic (FRP) Panels For Walls,Roof,And Floor.Both Side Smooth Finish & 2 Nos Book/ Self Counter. Door:- Single FRP Door With Locking Mechanism.1Nos Door. Windows:- FRP Windows With Sliding With Steel Grills For Added Security.&2 Window. Flooring:- FRP Flooring. Electrical Fittings:-Provision For Electrical Fittings Including:- -LED lighting Fixtures. -Electrical Sockets. -Wiring For Power Supply. Ventilation:-Ventilation Fans To Ensure Proper Air Circulation Inside The Cabin. Painting/Finish:-UV-Resistant Coating Shall Be Applied For Durability And Longevity. Accessibility: including Transported And Installed At The Desired Location Using Appropriate lifting And Handling Equipment.As Per Directed By Engineer in Charge Complete.

Providing And Fixing Screw Down Bib Taps of Following Size.(B) Brass chromium plated screws down Bib Tap. as directed by Engineer in Charge Complete. (i) 15mm dia.

Providing And Fixing Ball Cock of Approved. quality as directed. as directed by Engineer in Charge Complete.(B) Abonite (ii) 50mm dia.

Waste Water Pipe Providing & Fixing U-PVC Pipe of Prince/Supreme/Jain/Astral/Tulsi/Finolex make for soil and waste discharge system at all floor levels incl. All fixtures like bends, tees, shoe etc. jointed with resin of approved brand & manufacture etc.as directions of Engineer in Charge Complete. Size: - 50 mm dia Make: Prince/Supreme/Jain/Astral/Tulsi/Finolex

Providing Laying And Jointing in True Line And Level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. as Directed by Engineer in Charge Complete.

Providing Laying And Jointing in True Line And Level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. as Directed by Engineer in Charge Complete.

Providing Laying And Jointing in True Line And Level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. as Directed by Engineer in Charge Complete.

Providing And Fixing PVC SWR Nahni Trap IS 14735 For Drain - 100 mm diameter with jali of the following nominal diameter of self cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls. as Directed by Engineer in Charge Complete.

Providing & erecting open well horizontal mono block pump set with cast iron body, complete for three phase submersible motor having. as directed by Engineer in Charge Complete. [D] For 5 HP 3 phase open well horizontal mono block pump set suitable for 1350 LPM to 310 LPM @ 10 to 42 Mtr head suitable for 50/65 mm dia delivery pipe Cat III.

Providing Erecting and Fixing Double Coated ISI Water Tank of required capacity each with all necessary fittings and connection etc. complete on terrace. as Directed by Engineer in Charge Complete.

Fire Extinguisher-ABC Powder Type, 6 KG. Supply,Installation And Testing Of: ABC Powder Fire Extinguisher Necessary Hardware And Consumables. Stored Pressure Mechanism. Charged With MAP-50 % (ABC) Dry Powder. With Wall Mounting Clamp. Size:-6 KG Powder. As Per Directed By Engineer In Charge Complete. UOM:-PRICE PER EACH NO.

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete.[A] For 4.5 Kg Capacity

Providing And Fixing DECORATIVE PENDANT & HANGING LIGHTS Having 10/15 Wattage With Necessary Fittings:- Decorative Light including Modular Type Switch Board With Necessary Connections As Per Directed By Engineer In Charge. Sample As Approved By Architects Or Engineer-In-Charge Complete.

Providing And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Modular Plate Etc.As Required.3 Pin 6/16 Amp Socket Outlet With Necessary Connections As Per Site Situation &As Per Directed By Engineer In Charge Complete.

Point Wiring For Light/Bell With 2-1.5 sqm & Earth Wire Of 1.5 sqm (Green) Both Are Of ISI Marked 1.1 KV Grade FRLS PVC insulated Multi Strand Copper Wires Upto10 mtr Length ,In Below Type Of Pipe Erected With 6A Modular Type Switch / Bell Push &Accessories And Earth Continuity Of Following Type,Erected On PVC / Metallic/Wooden Box,Single Mounting Base Frame Covered With Textured/Metallic/White Front Plate Modules Erected On/ In Wall / Ceiling As Per Pipe Erected, With Necessary Lamp Holder/Ceiling Rose / H.D.Connector As Directed.As Per Directed By Engineer in Charge Complete. (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete Cat III.

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories.[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board. (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete..Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories . as directed by Engineer in Charge Complete.[II]For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board. (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete cat III

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables.(B) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. (A) 3 core 2.5 Sq. mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed by Engineer in Charge Complete. (b) 25 mm

Providing And Erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1&3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for. as directed by Engineer in Charge Complete. (B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel double door (IP-43) (iv)12 way

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240V A.C. system and having breaking capacity 10KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III. as directed by Engineer in Charge Complete.

Supply and fixing following Size/modules,GI box along modular base & cover plate for modular switches in recess etc as requries. 8Module (125mmx125mm)

Supply and fixing following Size/modules,GI box along modular base & cover plate for modular switches in recess etc as requries. 6Module (125mmx125mm)

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity. as directed by Engineer in Charge Complete. (c)63 Amp.Cat.III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge. (11) 6 Amps. Bell Push,(Cat.III)

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge. (13) 16 Amps. Modular switch,(Cat.III)

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge. (13) 6/16 Amps. ModularUniversal socket (Cat.III)

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover. (A)(approved make OEM has to submit test certificate including value of earth resistance of installation duly stamped and signed by agency and officer Incharge has to ensure the value of earthing resistane mentioned in test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- 1 volt at no load & dry form, Sulphar content:- 2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary test report must be submitted by Agency. (a) For Electrical Installation up to 440V in normal soil Length of pipe - 1 Mtr Back filling compound - 1 Nos Bag of 15 Kg.

Providing & Laying LED Down lighter 22 Watts wide beam,reflector,circular shaped surface type outdoor, warm white (For passages).as for directed Engineer in charge Complete.

Providing & Laying LED Down lighter 16 Watts wide beam,reflector,circular shaped outdooe type (For staircase).as for directed Engineer in charge Complete.

Providing & Laying SFU base four pole,415V,Charge over Switch of rating 160Amps,Cat-III.as for directed Engineer in charge Complete.

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for enclosing cable. as directed by Engineer in Charge Complete. (C) 90mm

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for enclosing cable. as directed by Engineer in Charge Complete. (D)120mm

Providing and fixing GI Cable Tray. Made from sheet steel. The Junction should be bended as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction Made from sheet steel. The Junction should be bended as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge of following sizeof engineer in charge of following size. (a).Size-100x75x1

Providing and fixing GI Cable Tray. Made from sheet steel. The Junction should be bended as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction Made from sheet steel. The Junction should be bended as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge of following sizeof engineer in charge of following size. (b).Size-300x75x1

Supplying & Fixing of 24Hr x 7 days Programmable Digital timer 250V, 25A timer controlled dual starter for controlling Fan,Server room with electrical accessories arrangement with all connections by finishing the ends of 2 x 4 & 1 x 2.5 mm2 copper wire with dowells solderless socket by crimping method as to GS, earthing attachment on wall incl. necessary connections as per direction by Engineer in Charge Complete.

Supplying and Laying (25 mm X 5 mm) G.I Strip at 0.50 metre below ground as strip earth electrode, including connection/ terminatingwith G.I. nut, bolt, spring, washer etc. as required. (Jointing shallbe done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm).and as per instruction of engineer in charge of following size of engineer in charge Complete.

Providing &Erecting Modular MCB Switch,Single Pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity.(a) 20Amps

Providing & Laying 4-Pole Contactors for controlling non-inductive or slightly inductive loads resistance furnaces and generally for controlling power circuits up to 690 V AC and 440 V DC design with 4 main poles.control circuit AC or DC operated with electronic coil interface accepting a wide control voltage range (100,250 V AC and DC),4 control voltages ranges covering 24...500 V 50/60 Hz and 20...500 V DC. can manage large control voltage variations. - reduced panel energy consumption - very distinct closing and opening. – built-in surge suppression – add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. as directed by Engineer in Charge Complete.

Point Wiring For Tissino/Modular Secondary Light Point With 2-1.5 sqm & Earth Wire Of 1.5 sqm (Green) Both Are Of ISI Marked 1.1 KV Grade FRLS PVC Insulated Multi Strand Copper Wires,In Below Type of Pipe To Be Erected Complete With Earth Continuity And Necessary Connection With Primary Light With Accessories Erected On Metal /PVC/Wooden Box Covered With 3 mm Thick PC(Polycarbonate) /Acrylic Sheet For Open /Concealed Wiring. With Necessary Lamp Holder /Ceiling Rose / H.D.Connector As Directed. Note:-Maximum Upto 6 mtrs Length,Excess Will Be Considered As Mains For Secondary Point.As Per Directed By Engineer In Charge Complete. (f) With Medium Class Rigid PVC Pipe And Accessories Erected Concealed In Wall/Ceiling Complete Cat III.

Point Wiring For FAN With 2-1.5 sqm & Earth Wire of 1.5 sqm (Green) Both Are of .ISI Marked 1.1 KV Grade FRLS PVC Insulated Multi Strand Copper Wires Upto10 mtr Length,In Below Type Of Pipe Erected With 6A Modular Type Switch And Hum Free EME Step Type Electronic Fan Regulator Mounted And Accessories With Earth continuity of following type erected on PVC/Metallic/Wooden Box, Single Mounting Base Frame Covered With Textured/Metallic/White Front Plate Modules Erected On / In Wall/Ceiling As Per Pipe Erected. With Necessary Ceiling Rose / H.D.Connector As Per Directed By Engineer in Charge Complete. (f) With Medium Class Rigid PVC Pipe And Accessories Erected Concealed In Wall/Ceiling Complete Cat III.

Point Wiring For Individual Plug With & Earth Wire Of 1.5 sqm (Green) Both Are Of ISI marked 1.1 KV Grade FRLS PVC insulated Multi Strand Copper Wires Upto 10 mtr Length, in Below Type Of Pipe Erected Complete With Modular Type Switch & 5 Pin Plug Erected on PVC/ Metallic/Wooden Box Covered With Appropriate Front Plate Modules Erected On/In Wall/Ceiling As Per Pipe Erected With Following Type Of Accessoriesas Per Directed By Engineer In Charge Complete. [II]For 16A Plug And 16 Amp Switch With 2-2.5 sq.mm Cu. Wire From MCB DB Board. (f) With Medium Class Rigid PVC Pipe And Accessories Erected Concealed In Wall/Ceiling Complete Cat III.

Supplying And Erecting LED Indoor Fittings With LEDs Of Wattage 0.2 Watt To 0.5 Watt Assembled On Single MCPCB, With Housing Used As A Heat Sink Shall Be Made Of Thick Sheet Steel Conforming To IS: 513/CRCA/Aluminium Die Cast Powder Coated And High U.V. & Corrosion Resistance With Diffuser With Company Mark/Name 160V to 270V,Power Factor More Than 0.95, THD 15%, CCT 3000 K To 6500K, Luminaire Efficacy 85 Lumens/Watt ,LED LED Driver Efficiency 85 % (Fitting Required LM-79 & LM-80 Certificates)(NOTE: Below Description Have Shown Ranges Of Wattage Capacity Of LED Fittings.The Engineer incharge May Select Any Wattage Capacity Between The Ranges Shown.)As Per Directed By Engineer In Charge.Complete. (A) Tube Light With Integral Driver. (iii) 18-20 Watts,Surge -2KV,IP-20,Conventional 4 Feet.

Supplying And Erecting Led Lamps With Following Wattage Capacity Of 220 To 240 Voltage,Minimum 15000 Burning Hours Life, 500 V In Built-Surge Protection,Polycarbonate Diffuser, Mounting Suitable For E14/E27/B22 Lamp Holders, pf = 0.5 As Per Directed By Engineer in Charge.Complete. (A) LED Lamps Integral Type,With PC Diffuser Suitable LAMP Holder. (ii) 5 To 8 Watts Cat-III.

Providing & Erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm weep complete having 3blades with aluminium blades with , canopy & 30 cm. down rod erected with earthing.(Make shall be approved by Engineer in charge). as directed by Engineer in Charge Complete.

Supplying & erecting Fan Hook Box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary finishing. as directed by Engineer in Charge Complete.

Providing 2.5mm.thick laminated acrylic sheet To Cover The Fan Hook or Fan Box. as directed by Engineer in Charge Complete.

Supply, Installation, Testing And Wireless Of WI-FI White Single Band Router,300 MBPS Model Supply And installation Of WIRELESS Indoor WIFI Access Point Having Dual Band Zone Flex R510 2x2:2 MIMO With Directional Antennas And Beamflex+ Technology.With 2 Gigabit Ethernet Ports With Secure Mounting Bracket Complete With Necessary Mounting Arrangement Make Huawei Wifi-6/ Rukus Complete In All Respects.Model: Rukus R510 / Equivalent. Wiring For Each POE Wi-Fi Access Points To Be installed On Walls/Slabs Or On False Ceiling With Cable CAT-6 UTP Cable Cable In 1" Dia PVC Conduit (Excluding Cost Of Pipe) Make Plasco/Beta Pipes,Complete In All Respects.As Per Directed By Engineer in Charge.Complete.

Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost charger with IGBT base rectifier & Inverter & sealed maintenance free SMF batteries. The charger having operating capacity for input 160-270V AC & inverter having output 230V,50 Hz Ac with 0.8 load power factor with battery, over/under voltage output with over load & short circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following power backup.with MS painted batteries stand, 10% Overload capacity for momentary load. (D) 5 KVA with 1Hr Backup

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name 160V to 270V,Power Factor more than 0.95, THD 15 %, CCT 3000 K to 6500K, Luminaire efficacy 85 lumens/watt , LED driver efficiency 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (D) LED Strip Light (ii) Minimum 7.2W -240 LED per meter,(2 wire, IP-65) with non integral suitable Driver complete. CAT-III

Providing and fixing an acrylic LED board 12ft x 3ft designed for Pani puri skywalk having following specifications: - 1. Material -Acrylic Sheet: High-quality, UV-resistant acrylic with a thickness 6mm.- Frame: durable and aesthetic aluminium frame 2. Dimensions - Size: Customizable based on requirements. For quoting rate a size of 12ft long x 3ft height tob considered. - Thickness: As per the desired strength and visual effect. 3. LED Specifications - Color Temperature: As per the approval of architect or engineer-in-charge ranging from 2700K (warm white) to 6500K (cool white) or RGB for colour-changing effects. 4- Brightness: Adjustable, between 300 to 1200 lumens. 5. **Mounting and Installation - Mounting: Wall-mounted with custom brackets or fixtures. - Installation: Includes mounting hardware and instructions; professional installation recommended 6. Controls and Features - Control System: Basic on/off switch, remote control 7. Safety and Compliance - Protection: IP68 rated for outdoor applications (ensure acrylic and components are suitable for intended use). 8. Design and Aesthetics - Finish: Clear or frosted acrylic, with options for custom shapes and edge finishes. - Edge Lighting: For a backlit effect 9. LED Lifespan: Minimum 40,000 hours 10. Warranty- Warranty: Minimum 2 years, covering defects in materials and workmanship.