UT Administration Of Dadra And Nagar Haveli Tender

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.

Providing material & labour for P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for DARK shade.

Providing material & labour for fixing FRP frame size 125x65 mm and 35mm thick FRP shutter with wood grain raised panneled design finish shutter having extra reinforcement on sides & edges in Gel coat finish. The core of the shutter & frame is to be filed up with injected polyurethene foam done in situ alongwith embedded wooden pieces for stiffening & also taking hinges & fintures. The whole FRP frame & shutter is to be water proof weather proof, termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with fastener sleeve & alluminium fixtures & fastenings.

Providing material & labour for fixing single layer waterproof gypsum board 12.5mm thick of the make Newgood group Co. Ltd. Or equivalent & Newgood group Co.Ltd. Or equivalent & New good Group Co. Ltd. Company sections using waterproof board of size 1220mm x 1830mm x 8.0mm suspended by G.I. suapender of size 25mm x 3mm with intermediate channel of size 18mm x 40mm x 0.80mm at 1220mm center to center ceiling section of size 40mmx35mmx0.55mm at 457mm center and perimetre chanel A of size 20mm x 27mm x 30mm x 0.50mm at edges & drops including paper tap sand sofit cleat, anchor fastener, scoch bolt connecting cleat joining compound top coat on ceiling including making necessary opening for light fitting, diffuser etc. complete as per detail drawing as directed.

Providing material & labour for laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation & plinth.

Providing and fixing Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift

Providing and fixing Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows including Indian teak wood frames 10 cm x 7 cm. size including anodized alluminium fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete. (iii) Partly panelled and partly glazed. (with material & labour)

Providing material and labour for Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in Cement Mortar 1:5. (1- Cement : 5 -fine sand) for brick work in superstructure above plinth level upto floor two level.

Providing material and labour for laying 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (i)Cement mortar 1:3 (1-cement:3-sand) Extra over items 58 to 64 for finishing with a floating coat of neat cement slurry.

Providing material & labour for Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of read lead paint. (A)In beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like.

Providing material & labour for fixing water closet squatting Pan (Europeon type W.C. Pan) .

Providing material & labour for fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately)(A) Vitreous China (I) In white colour.

Providing and laying (to level or slopes) and jointing with stiff mixture of Cement Mortar in proportion 1:1 Salt glazed stoneware pipes including testing of pipes and joints complete.(B) 150mm dia. (upto 10 ton)

Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap polished bright. (i) 15mm dia.

Providing material and labour for fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [C] 25 mm.

Providing material and labour for fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[A] 15 mm.

Construction of B.B. Masonary Kundi of clear inside dimension size 0.60M x 0.60M x 1.20M with 23cm thick B.B. masonary wall in C:M 1:6 including required excavation, C.C. 1:2:4 15cms. Thick refilling 12mm thick cement plaster to masonary and floor C.C. layer and fixing thepre cast R.C.C. cover of Circular shape 560 mm internal diameter With frame etc. complete (with material & labour).

Providing material and labour for fixing 100mm sand cast iron grating for gully, floor or Nahni trap.

Providing material and labour for laying cement concrete work 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete including cost of formwork but excluding the cost of reinforcement for reinforced concrete work in (B) Slabs, landing, shelves, Balconis , Lintels, Coping, Wallcap, Beams, Girders and Cantilever upto floor two level.

Providing material and labour for fixing TMT Bar FE 415 reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level .

Providing material & labour for Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete.

Providing material & labour for Distempeing (Two coats) with oil bound distemper of approved brand and manufacture and of required shade on wall surfaces to give an even shade, over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth.

Providing material & labour for Painting two coats (with priming coat) on new wood and wood based surface with enamel paint, interior to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand papering and stopping.

Providing material & labour for Painting two coats (with priming coat) on new steel and other metal surface with synthetic enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

Providing Point wiring for Light / Bell with 2-1.50 sq.mm & earthwire of 1.5 sq.mm (green) both are of ISI market FR PVC insulated multistrand copper wires, in existing pipe duly erected complete with 6 A moduler type switch/ bell push & accessories and earth continuity of follwing type, erected on PVC/Metalic box covered with appropriate front plate modules erected in wall/ celling (B) Single mounting base-frame & textured / Metalic front plates, with nesesary ceiling.

Providing Point using for Looped Plug with 2-1.50sq.mm & earthwire of 1.5 Sq.mm (green) both are of ISI marked FR PVC insulated multistandard copper wires, in existing pipe duly erected complete with ISI marked 3 pin 6A socket and 6A modular type switch erected with earth continuity connection for open wiring.

Providing & erecting Mains with 1.1KV grade FRPVC insulated ISI marked stranded copper conductor wire in existing pipe erected with 1.5sq.mm copper conductor FR PVC insulated wire of green color for earth continuity of following size (c) 2 wire 2.5 Sq.mm.

Providing & erecting Mains with 1.1KV grade FRPVC insulated ISI marked stranded copper conductor wire in existing pipe erected with 1.5sq.mm copper conductor FR PVC insulated wire of green color for earth continuity of following size (c) 2 wire 4 Sq.mm.

Supplying and erecting PVC trunking (PVC casing capping) having double locking arrangement with grooves, trunking of size not below 12.5mm in height as per IS 14927 part-I of 2001 and with accessories of PVC/resin polypropylene not below 1.8mm thick duly sealed in joint and erected on wall/ceilling of following size make prestoplast/standard (b) 25mm.

Approved make ELCBS/RCCBS conforming to IS: 12640 and having sensitivity of 30MA and short circuit withstand capacity of 6KA suitable for operationn on 3 Phase and neutral 415V. Having characteristic of quick action & tripping with all advance feature & do not incoporate any electronic component for folloeing max. rating for 63mp Cat-III Make:- L&T/MDS/HAVELLS/GE.

Providing and erecting Sheet Steel powder coated MCB distribution board - flush/ surface mounted fitted with busbar, neutral link, erth bar and DIN rail, Conforms to IS 8623-1 & 3, IES 61439-1 & 3 without MCB to house appropriate nos. of MCBs. (The DBs should be used of same company of MCB to be used suitable for Sheet steel double door 12 way

Providing and erecting approved make ceiling fan with double ball bearing ISI mark with condenser 230 Volt A.C. 50Hz. 1200mm sweep complete having 4blades aluminium body and blade sets having ornamental design shanks, canopy &^ 30cms. Down road erected with 24/0.2,3 core flexible wire earthing (make shall be approved by engineer in charge).

Supplying and erecting LED indoor fittings with LED of wattage 0.2 watt to 0.5 watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet steel conforming to IS:513/CRCA polyster powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name.

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in RPM (E) 450mm dia 1400 RPM.

Providing material & labour for recess in wall or window frame suitable for erection of Exhaust fan complete with plastering and colour washing to match the colour of the wall or window complete with expanded metal in order to render the fitting in accessible and the room water proof.

Providing & fixing for fixing cast iron (Spun) Nahni trap of the following nominal diameter of self cleaning design with C.I. screaed down or higned grating including cost of cutting and making good the walls and floor 100mm inlet and 50mm outlet.(C) 100mm dia.

Providing & fixing for wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.

Providing & fixing for wash down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in white colour.

Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 20mm dia.

Providing & fixing for G.I. inlet connection for flush pipe with W.C. Pan.

Providing and fixing M.I. fisher union for washbasin or sink. (A) 40mm dia.

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers.

Providing and fixing brass screw down stop tap.(B) 20mm dia.

Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia.

Providing material and labour for Fixing ISI MARKED FLUSH DOOR SHUTTERS conforming to IS:2202 (Part-I) Decorative type, core of block board Construction with frams of 1St class hard wood and well matched teak 3 ply veneering with vertical grains or cross band and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws, with Providing & Fixing decorative high pressure laminated sheet of plain/wood grain in gloss/ matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S, including cost of adhesive of of approved quality 1.0mm Thick on both face, with Providing and fixing S.S. tower bolts (barrel type) with necessary screws etc 200mm long x 10mm dia, with Providing and fixing S.S. Door Aldrop with necessary screw etc. 300mm long x 16mm dia, with Providing and fixing S.S. Pipe Handle for door 30cm size on both side od Door shutter, with Providing and fixing S.S.hanging type floor door stopper with necessary screw etc. complete as directed by Engineer in charge. All S.S Shall be ASIS 304 Grade.

Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete.(i) 25mm dia.

Providing material & labour for laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick

Providing material & labour for fixing glazed louvered glass windows and ventilators with teak wood frame 10cm. x 7cm. size including 3 coats of oil painting to wood work etc.complete. with wooden louvers plank 12mm thick.

Providing & fixing for plastic seat and cover for wash down water closer with C.P. brass hinges and rubber buffers. (B) Black plastic seal and cover.

Supplying and erecting LED indoor fittings with LEDS of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser with company mark/name 120 to 300 V,Power Factor more than 0.9, THD 10 %, CCT 3000 K to 6500K, Luminaire fficacy 85 lumens/watt LED efficiency- 110 lumens/watt LED driver efficiency 85% CREE OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux make LED used for luminaire. (fitting required LM-79 & LM-80 Certificates) (NOTE: Below description have shown ranges of Wattage capacity of LED fittings. The Engineer incharge may select any wattage capacity between the ranges shown.) (LED lamps integral type, with PC diffuser suitable LAMP holder) ( 5 to 8 watt) (cat-II, cat-III) Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name 120 to 300 V,Power Factor more than 0.9, THD 10%, CCT 3000 K to 6500K, Luminaire efficacy 85 lumens/watt, LED efficiency 110 lumens/watt. LED driver efficiency 85% CREE/OSRAM / PHILIPS Lumileds / NICHIA/ SEOUL/Bridgelux make LED used for luminaire. (fitting required LM-79 & LM-80 Certificates) (NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) LED Bulbs

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.

Providing and fixing 600mm x 120mm glass shelf with C.P. brass bracket and guard rail complete mixed to wooden plug with C.P. brass screws.

Providing and fixing Rubber plug for sink or wash basin.