UT Administration Of Dadra And Nagar Haveli Tender

SITC ,of exterior BIS registered RGBW Linear LED Wall Washer luminaire for facade lighting with extruded aluminium housing, powder-coated finish, Clear toughened glass of 4mm thickness and die casted end caps, of Total System wattage not exceeding 40W with system lumen output 2000lm with all LEDs on, minimum system lumen efficacy 50 lm/w. Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol / Ethernet based control. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering 25°beam angle. Glass of the fitting should be high graded toughened glass. Power Coating should be RAL 7024 Power coating 7 tank process. Fixture should have Height 49 mm ± 5% including surface mount base width 50 mm ± 5% , length 1000 mm ± 5% with constant locking two holes with nut and screw for simple position control from various angles without special tools. DMX enabler circuit should be inside the Luminaire only. The rated voltage of the Luminaire should be 24VDC, Luminaire shall be offered with a BIS Approved Potted Driver of IP 66/67 rating made of extruded aluminium to make it more thermal efficient, Led Driver should have Operating input voltage range: 90-305Vac, with APFC, THD 10% max, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV with SPD. PF 0.90 and must have safety operation range form 90V - 176Vac. Fixture shall be suitable to operate at an ambient temperature range of -20°C to 50°C and complete luminaire shall be IP66 and IK07 rated. LED Life time shall be at least L70B50 @ 50000 burning hours at 50°C. LED should be with ceramic package of make Nichea, Osram, Cree, Lumiled only. DMX enabler circuit should be inside the Luminaire only. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Havells Colorline 40W RGBW or Equivalent. Luminaire shall be conforming to BIS i.e. IS 15885 (Part 2/Sec 13) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. Including all and/or as directed by E-in-C.

Supply, installation, testing and commissioning of factory manufactured DMX extension cable Connector 4 PIN Male & Female for Fixture to fixture fixing including all and/or as directed by E-in-C.

SITC of DMX Controller for the system including all other accessories required for the running of the system Controller should have Input Power 5-5.5V DC 0.6A and Output Protocol DMX512 with 4 universe,2 universe should work in Stand Alone Mode and 2 universe should work in live mode with laptop/ tablet / computer. The universe should be expandable from 2 to 4 DMX512 universes. It should be compatible for Programmability with PC, Mac, Tablet, Smartphone by using USB & Ethernet. Dmx controller should have network controllability feature to control the scene remotely through LAN and triggered via UDP packets on port 2430. Its must have Connections Type C USB, XLR3, Ethernet, battery. There should be provision for Memory microSD card. Device should have Intuitive backlit keyboard with 10 presets and also have provision of kepad on device for changing scene manually from device. Device should be capable to work on Extended triggering possibilities (TCA) & also have Smart Upgrade Technology (SUT).It is an IP 20 unit and has an Operating Temperature of 0°C to 50°C. weight should not be more than 120g. OS Requirements for the controller is Mac OS X 10.8-10.12, Windows 7/8/10. Standards should be EC, EMC, ROHS. The controller should have a variety of features including 2048 DMX channels, clock/calendar, iPhone/iPad/Android remote control, Ethernet facilities, dry contact port triggering and multi-zone SD card memory. Network synchronization of one area across hundreds of universes with the possibility of 99 scenes across 5 areas with auto clock triggering for sunrise and sunset and as per the festivals for specific occasions. Device should be equipped with meta; clamp to mount on wall .Equivalent Havells DMX , Philips iPlayer 3 with data enablers and splitters as required. The Facade Lighting products and DMX controller should be of same / single make. To be provided with IP 66 enclosure if installed in external environment. Including all and/or as directed by E-in-C.