UT Administration Of Dadra And Nagar Haveli Tender

PAINTING AND FINISHING OF SURFACES - two coats of approved shade Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials. etc complete

CLADDING of 300 mm level- to support the cladding material SUPPLY, INSTALLATION AND TRANSPORTATION OF P/F COLOURED COMPRESSED BOARDS CANOPY BY USING 8MM THK EVEREST OR EQUILANT MAKE COLOUR COMPRESSED BOARDS & , 50*25*16G AL TUBES/MS SUPPORTIVE FRAMES HAVING GROOVES CREATED AS PER ARCHITECT'S DRAWING.

CLADDING of 600 mm level- to support the cladding material SUPPLY, INSTALLATION, AND TRANSPORTATION OF P/F COLOURED COMPRESSED BOARDS CANOPY BY USING 8MM THK EVEREST OR EQUILANT MAKE COLOUR COMPRESSED BOARDS & , 50*25*16G AL TUBES/MS SUPPORTIVE FRAMES HAVING GROOVES CREATED AS PER ARCHITECT'S DRAWING.

CLADDING of 900 mm level-to support the cladding material SUPPLY, INSTALLATION AND TRANSPORTATION OF P/F COLOURED COMPRESSED BOARDS CANOPY BY USING 8MM THK EVEREST OR EQUILANT MAKE COLOUR COMPRESSED BOARDS & , 50*25*16G AL TUBES/MS SUPPORTIVE FRAMES HAVING GROOVES CREATED AS PER ARCHITECT'S DRAWING.

CLADDING of 1500 mm level- to support the cladding material SUPPLY, INSTALLATION AND TRANSPORTATION OF P/F COLOURED COMPRESSED BOARDS CANOPY BY USING 8MM THK EVEREST OR EQUILANT MAKE COLOUR COMPRESSED BOARDS & , 50*25*16G AL TUBES/MS SUPPORTIVE FRAMES HAVING GROOVES CREATED AS PER ARCHITECT'S DRAWING.

Canopy - Fabrication SUPPLY, INSTALLATION AND TRANSPORTATION OF P/F CANOPY BY USING HEAVY MS ISM CHANNELS /TUBES & TOP CLADDED WITH 15MM EVEREST HIGH DENSITY BOARDS

Canopy - pergola in MS fabrication (6.15x0.3 m) SUPPLY, INSTALLATION AND TRANSPORTATION OF P/F CANOPY BY USING HEAVY MS ISM CHANNELS /TUBES & TOP CLADDED WITH 15MM EVEREST HIGH DENSITY BOARDS

Canopy - Columns in MS frame SUPPLY, INSTALLATION AND TRANSPORTATION OF P/F COLOURED COMPRESSED BOARDS CANOPY BY USING 8MM THK EVEREST MAKE COLOUR COMPRESSED BOARDS & , 50*25*16G AL TUBES/MS SUPPORTIVE FRAMES HAVING GROOVES CREATED AS PER PROVIDED PLANS WITH AL TUBES 50*25MM, 16G

Providing and fixing Canopy- acrylic sheet cover : 3 mm thick translucent white acrylic plastic sheet as directed by Engineer-in-charge.

Providing and fixing 35 mm thick panelled ,glazed or panelled and glazed shutters, for Doors windows and clearstory windows including anodised alluminium But hinges with necessary screws and indian teak wood shutters with. (C) Hard board panels. BEWELLED WINDOWS FOR FAÇADE WITH WOODEN FRAME

Providing and fixing sheet glass, selected quality (Type-C) bedded in putty and fixed with wooden beading including the cost of wooden beadings of first class teakwood and necessary cutting of glass. (2) 6 mm thick. For using ground glass (frosted or obscured on one side) instead of plain glass.

WIRED ARTIFACTS Supply,designing,Installation,Transportation and commissioning of Models design from Metal with colors as per approval of Architect. Providing and fixing in position commissioned art works inside the building. The composition of the commissioned art work shall be from any type of wood, metal like copper, brass, SS, MS, fabric, polycarbonate sheets, acrylics, rubber, plastic, tough boards, cementatious boards, fibers, gypsum, POP etc. all. The formwork of material may also very based on material properties like sheets, wires, blocks, inclusion of cutouts, bending of the materials, profile cutting an shaping of the materials, manufacturing at site as well as at site, covering the prepared material by means of the bubble sheets, jute or in wooden packing materials. The commissioned art work may require any shade, finish and texture of duco painting, specialty painting, PU painting, general painting to paintable surfaces, galvanizing, powder coating, anodizing etc.. The base surface where the commissioned art work is to be installed also needs some modification to enhance the effect of art works. The use of material like fiber glass wool/ boards, filler fabric, mounting material may also essential based on the design of the art work by artist. The rate shall be inclusive of any type of lighting features to be added into it includes LED lights, neon lights including its supporting and suitable wiring for the same within the art works. Only one electrical control point connection will be given as close to art works. The rate shall be inclusive of making necessary provisions within the commissioned art works of fixing of the same. The provisions of the fixing of the art work may be in parts but it shall be inclusive of the all arrangements like LN key, studs, anchors, nuts and bolts etc. all.. The concept of the art work will be generated by architect and interior designer and based on that offers from the artists to be invited for design and execution of the artwork. The selection of the artist is to be done by architect and interior designer only. The protection and cleaning of the pre and post installation of the art work is the responsibility of the main contractor.

WALL MURAL ART WORKS -NATRAJ ART WORK - Supply,designing,Installtion,Transportation and commissioning of Models design from FRP with Back grout figure painting behind natraj scuplture.

WALL MURAL ART WORKS - 7Mudra Mural Artwork - Supply,designing,Installtion,Transportation and commissioning of Models design from FRP.

WALL MURAL ART WORKS - Saraswati Maa Artwork - Supply,designing,Installtion,Transportation and commissioning of Models design from FRP.

WALL MURAL ART WORKS - Classic wall Painting (Side elevation)

KALA KENDRA NAME SIGNAGE WITH CNC CUTWORK AND 5mm THICK SS WITH GOLD PVDF COATING FINISH PLATE. DIMENSION : 2.4 M X 0.85 M

LINEAR FLEX LIGHTS: Supply, installation, Testing and commissioning of Linear flex lights with Power Consumption 8 W Luminous Flux 500 Lm / M at 4000 K,Color Temperature 3000 K / 4000 K / 6500 K / RGB / RGBW Beam Angle 114° Input Voltage AC100-240 V / DC24 V Control DMX / RDM / DALI / Remote / On-Off Dimensions W 16 x H 17 x L mm.

FOCUS LIGHTS: Supply, installation, Testing and commissioning of Track-mounted round focus light with moveable base. Fully adjustable with aluminium housing (including driver casing). 40⁰ beam angle,20 W Dia: ø 110 mm,Length: 268 mm,Width: 240 mm,Height: 131 mm or similar specification. Certificate BIS / CE / RoHS or similar specification. Make:Jaguar/Philips/Havells or equilant

LED WALL WASH LIGHTS: Supply, installation, Testing and commissioning of wall wash light with profile with aluminium housing (including driver casing). 40⁰ beam angle,20 W Dia: ø 110 mm,Length: 268 mm,Width: 240 mm,Height: 131 mm or similar specification. Certificate BIS / CE / RoHS or similar specification. Make:Jaguar/Philips/Havells or equilant

Supplying, Installation, Testing and Commissioning of Lighting Point (Wiring Included) as per direction of Engineer-in-charge/Consultant.

Supplying, Installation, Testing and Commissioning of Plug Point (5 Amp) - Supply, installation, Testing included as per direction of Engineer-in-charge/Consultant.

Supplying, Installation, Testing and Commissioning of Distribution box (8 Way) , Tpn (32 Amp) , 4 SPL , including earthing (Supply, installation, Testing all included) as per direction of Engineer-in-charge/Consultant.

Supplying, Installation, Testing and Commissioning of 1.5 Main line (3 core) - 50 mt - (Supply, installation, Testing all included) as per direction of Engineer-in-charge/Consultant.

Supplying, Installation, Testing and Commissioning of ELC - (Supply, installation, Testing all included) as per direction of Engineer-in-charge/Consultant.

Supplying, Installation, Testing and Commissioning of 4 sqmm x 4 core - 100 mt - (Supply, installation, Testing all included) as per direction of Engineer-in-charge/Consultant.

Supplying, Installation, Testing and Commissioning of Timer - (Supply, installation, Testing all included) as per direction of Engineer-in-charge/Consultant.

Supplying, Installation, Testing and Commissioning of Creeper Plants for canopy as per direction of Engineer-in-charge/Consultant.

Providing and Supply Garden pots as per required size and as directed by architect consultant . The pot details is, Length 780 mm Width 340 mm and Height 270 mm in gray color.

Supply & plantation of shrubbery plants, development of bed, cultivation soil mixture and plantation of shrubbery (as per plantation plan provided). Pesticide application.Good earth and farm yard manure to be added wherever it is required. - Elelifa Red , Pendonas, Croton english, Rose.

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional

Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base or columns and Mass concrete

Dismentling and Re-fixing of doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift.(ii) Exceeding 3 Sq.M. in area as per direction of Engineer-in-charge.

Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (C) Slabs,landing,shelves,Balconies Lintels, Beams, Girders and Cantilever upto floor two level.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (B) Flat surfaces such as soffits of suspended floor roof slabs Landings and the like. (2) Floors etc. upto 200mm in thickness.

Providing and laying Vitrified tiles 8 to 10 mm thick , 36'' x 36'' in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement.

Providing 20mm thick cement plaster in single coat on single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand) etc. complete.

PAINTING AND FINISHING Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials etc complete.

Providing & erecting Approved make Ceiling Fan with double ball bearing ISI mark with Condenser 230 volt A.C.50 Hz. 1200 mm sweep complete having 4 blades Aluminium body and blade sets having ornamental design shanks, canopy erected with earthing

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser with company mark/name 120 to 300 V,Power Factor more than 0.9, THD 10 %, CCT 3000 K to 6500K, Luminaire efficacy 85 lumens/watt ,LED efficiency-110 lumens/watt LED driver efficiency 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux make LED used for luminaire. ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (d) 22-24 Watts, Surge - 2KV,IP-20, 4 feet

Supplying Installation and Testing of Compound wall lights as per direction of Engineer-in-charge/Architect/Consultant.

Supplying Installation and Commissioning of WIRING of compound wall light as per direction of Engineer-in-charge/Architect/Consultant.

Providing material and labour for SLIDING METAL GATE having MS Pipe 75 mm x 40 mm main frame, infill 50 mm x 25 mm including Red oxide, Black Oil paint, Channel pipe 75 mm x 40 mm and round pipe 20 mm, Hardware materials, Labor and fitting as per direction of Engineer-in-charge.

Providing material and labour for PEDESTRAIN METAL GATE of MS Pipe 75 mm x 40 mm main frame, infill 50 mm x 25 mm including Red oxide, Black Oil paint, Hardware materials, Labor and fitting as per direction of Engineer-in-charge.

SS NAME PLATE : 5mm thick SS Name plate matt finish as per drawing, 5mm thick laser cut acrylic letters. DIMENSION : 2.4 M X 0.85 M

STAGE FLOORING WITH STONE - stone that compliments existing WPC flooring as per direction of Engineer-in-charge/Architect/Consultant.

Providing material and labour for STAGE CANOPY IN FABRICATION as per direction of Engineer-in-charge/Architect/Consultant.

Providing and Supply Garden pots as per required size and as directed by architect consultant . The pot details is, Length 780 mm Width 340 mm and Height 270 mm in gray color.

Supply & plantation of shrubbery plants, development of bed, cultivation soil mixture and plantation of shrubbery (as per plantation plan provided). Pesticide application.Good earth and farm yard manure to be added wherever it is required. - Elelifa Red , Pendonas, Croton english, Rose.

15" MARINE PLY CUSTOMIZE FRONT SPEAKER 4 52500 210000 Light-weight and very high-power. 75°x 50°coverage. Bi-amplified or full-range passive operation.Dual-angle pole socket for applications requiring tripod mounting. Power Rating 800W

12" STAGE MONITOR SPEAKER 4 18500 74000 Frequency Response (±3 dB) 62 Hz – 19 kHz 90° x 50° coverage for even and smooth response on and off axis Dual-angle pole socket for applications requiring tripod mounting Heavy Duty 16 gauge protective screen backed steel grille Live performance stage monitoring Power 300w

18" MARINE PLY CUSTOMIZE SUBWOOFER 2 65000 130000 18 in., 2268H Differential Drive® woofer for extended low-frequency output Large port area for reduced distortion. 20 mm threaded pole socket for solid, secure satellite speaker mounting. Power Rating 1600 W

POWER AMPLIFIER 4000W 1 49000 49000 Adopt Famous Brand Toshiba Transistor Powerful in Sleek 2U Design Independent built-in crossover at both Channels Stable at 2 Ohms Heavy Duty Fans For Better Cooling

POWER AMPLIFIER 5000W 1 65000 65000 Adopt Famous Brand Toshiba Transistor Relay Circuit To Shut Down The Amplifier at Low Voltage (170) and High Voltage (280) High Damping Factor Stable at 2 Ohms Robust Copper Toroidal Transformer For High Continuous Current

Supplying, Installation, Testing and Commissioning of STUDIO MASTER 16U as per direction of Engineer-in-charge/Consultant.

Supplying, Installation, Testing and Commissioning of CROSSOVER as per direction of Engineer-in-charge/Consultant.

Supplying, Installation, Testing and Commissioning of WIRELESS MIC UHF FREQUENCY 4PC HAND MIC/4PC HEAD MIC as per direction of Engineer-in-charge/Consultant.

Supplying, Installation, Testing and Commissioning of SPEAKER CABLE OXYGEN FREE 200M as per direction of Engineer-in-charge/Consultant.

Supplying, Installation, Testing and Commissioning of INTERNAL CABLE, CONNECTOR,PIN, SOCKET ETC. as per direction of Engineer-in-charge/Consultant.

INSTALLATION & CALIBRATION as per direction of Engineer-in-charge/Consultant.

LED LIGHT Channel: 3 DMX Lamp: 54 Warm White 3WATT Control: DMX Master Slave Mode Auto Mode Power Consumption: 120W Power: AC 90-240V/50-60HZ

LED LIGHT Channel: 7 DMX Lamp: 54 RGB 3WATT 3IN1 Control: DMX Master Slave Mode Auto Mode Power: AC 90-240V/50-60HZ Power Consumption: 120W

MOVING HEAD LIGHT Power: AC 90-240V/50-60HZ Power consumption：470W Lamp: 280W Philips Channel: 20CH Display: Digital

SMOKE MACHINE 3000W 2 18000 36000 Dmx support

RJB BLINDER 2 25000 50000 Voltage: AC100 ~ 240V 50 / 60Hz, Power: 38V / 280W Lamp beads: 864 5050 three color LED lamp beads + 96 white LEDs Control mode: DMX512, self-propelled, master-slave, voice control, with the RDM function Stroboscopic frequency: 1 ~ 30Hz

Supplying, Installation, Testing and Commissioning of MINIPEARL DMX CONTROLLER BOARD as per direction of Engineer-in-charge/Consultant.

Supplying, Installation, Testing and Commissioning of SIGNAL CABLE FOR LIGHTING 100M as per direction of Engineer-in-charge/Consultant.

INTERNAL CABLE,PIN , SOCKET ETC. as per direction of Engineer-in-charge/Consultant.

TRANSPORTATION of all equipment

INR Zero Only