UT Administration Of Dadra And Nagar Haveli Tender

Providing, Supplying and Fixing of Mattress Protector. Size:-2000L X 1980W. It should cover the 10 inches thick Mattress. It should be soft and textured. Top layer should made out with 200gsm Terry Cotton, Bottom layer should be made out with Thermoplastic Polyurethane (TPU film lamination). Material is machine washable. Colour is white. It should be Elastic in nature for tucking in teh corners. Selection should be as per Architect or Engineer-in-Charge.

Providing, Supplying and Fixing of Cushion. Size:- 685L X 400W. Height should be adjustable. It should be medium firm to soft in nature. 150Gm. Fiber fill. Light and machine washable. Adjust height by removing the hollow fiber fill. Material is 350 GSM Spun polyester fabric. Colour will be white or grey. Selection should be as per Architect or Engineer-in-Charge.

Providing, Supplying and Fixing of Cushion Cover. Size:- 685L X 400W. It should be made out of combed cotton. It include with 1 inch border. Material is 144TC. Colour will be selected as per Architect or Engineer-in-Charge.

Providing, Supplying and Fixing of Side Table. Size:- 600L X 400W with Drawer work done as per Dwg. Shown. The table made out of 19mm thick plywood including selected veneer or laminate. Make out with Plywood Grade BWP710. Inside is finish as per selection. Outside is made out of 4mm thick wood veneer. Drawers as per detail Dwg. Leg should be made out of wood. Hardware is from Haffele or Hettich, Ebco. Selection should be as per architect or Engineer-in-Charge.

Providing, Supplying and Fixing of Center Table. Size:- 700mm Dia. The table made out of Teak wood or Sheashem wood. Finish with Wood finish with PU polish or Melamine polish. Hardware is from Haffele or Hettich, Ebco. Selection should be as per architect or Engineer-in-Charge.

Providing, Supplying and Fixing of Sitting Couch Sofa as per Drawings Shown. Size:- 1800L X 600W X 400H. Couch Sofa is made out of Plywood Grade BWP 710. Carcass is made out of plywood. Couch sofa Framming is done by plywood. Inside is make as per architect selection. Outside is make with approved shade fabric. Shutter and Drawers are as per architect selection.

Providing, Supplying and Commissioning of Samsung LED T.V. of 36 inch size. Resolution Full HD (1920X1080) with refresh rate 60 Hertz.2 HDMI ports to connect set top box, Blu-ray speakers or gaming console. 1 USB ports to connect hard drives or other USB devices.20 Watts output with Dolby Digital Plus 2CH Speaker Type.Tizen OS screen with In-Built WiFi,Screen Mirroring,1.5 GB RAM, 8 GB ROM, Supported Apps: Netflix, Prime Video, YouTube, Zee5, etc.Display : Hyper Real Picture Engine, 178 Degree Viewing Angle, Mega Contrast, Contrast Enhancer, PurColor, 1000 PQI.USB /HDMI supported.Audio Wattage 20 watts. Voltage 240 watts. Power source AC.Media format ‎AVI, MPEG . Item weight 6KG 400GM.Battery cell composition Lithium Ion.Speaker Surround Sound Channel Configuration ‎Dolby Digital Plus.

Providing, Supplying and Commissioning of LED (T.V.) Unit work as per Drawing shown. Size:- 1800L X 300W X 600H. The TV Unit made out of 19mm thick plywood with 0.8mm thick selected laminate including 4mm thick veneer or 1mm thick outer selected laminate.TV Unit is made out of Plywood Grade BWP 710. Structure is made out of Plywood. TV Unit inside is make out of as per architect selected Laminate. TV Unit outside is made out of 4mm thick teak wood veneer PU Polish or melamine or 1 mm thick selected laminate polish. Drawers is made as per detail drawing. Leg is made out of wood with necessary finish. Hardware is made out of with Haffele/Hettich/Ebco.

Providing and Fixing Working/Study Table work done as per Drawing shown.Size :- 1200L X 550W X 750H. Working/Study Table make out of Plywood Grade Century /Greenlaminate /Derby. Working/Study Table structure is made out of Plywood. Working/Study Table Top is made out of 18mm thick Plywood Top with Laminate Finish.Table is finish with 1mm Thick Approved Shade Laminate. All laminate shade should be as per architect selection.Working/Study Table Hardware is made out of Ebco/Hafele also adhesive SH Fevicol.

Providing and Supplying Working/Study Table chair as per Drawing shown. Chair is make out of solid wood. Chair structure is made out of solid wood. Table outside is Fabric Finish. Fabric shade should be selected by Architect.

Providing, Supplying and Fixing Full Height Wardrobe with Minibar work done as per Drawing shown. Size:- 1800L X 600W X 2250H. The Wardrobe made out from BWP 710 Grade Plywood with required cutting. The Wardrobe modification work proper in line, level with Top side Fixing of 19mm Thuick Plywood, Bottom and Vertical Side Fixing of 12mm Thick Plywood, Backside Fixing of 0.6mm Thick Plywood with outside Visible Side Fixing of 1mm Thick Approved Shade Laminate and Inside Fixing of 0.8mm Thick Off White Laminate with Edge Side Pasting of PVC Edge band as per approved shade of matching with Laminate.The Wardrobe's will having openable shutter with laminate finish with fitting of required Hardware, Material like nail, screw, adhesive, tools, tackles and labour etcetera work completed as per details.

Providing, Supplying and Fixing of Luggage Cum Mirror as per Drawing Shown. Size:- 1000L X 600W X 2150H. The Rack is made out from Bwp 710 Plywood with Required Cutting.Rack Modification work proper in line,Level with top side fixing of 19mm Thick Plywood with outside Visible Side Fixing of 4mm Thick Veneer or 1mm Thick Approved Shade Laminate and Inside Fixing of 0.8mm thick Off White Laminate with Edge Side Pasting of PVC Edge band as per approved shade or matching with Laminate/Veneer Bottom Side Fixing of Solidwooden Leg with Applying of Approved Shade Polish on Wooden Surface. The Rack Top's Around Fitting of Wooden Batten Patti with Fitting of Required Hardware, Material like nail, screw, adhesive, tools, tackles and labour etcetera work completed as per details. Rack will be without Drawers.

Providing and Fixing of Bathroom Vanity Mirror as per Detail drawing. Bathroom Vanity Mirror Width,Height,Length and Weight should be as per architect selection.

Providing, Supplying and Fixing of 03 Seater Dining Table as per detail drawing. Size:- 1000mm Dia. The table is made out of 19mm thick plywood including selected veneer. Structure is made out of Plywood or Solid wood. Make out with Teak wood veneer. Outside finish should be made out with Approved shade polish as per detail Drawing. Final product will be as per Architect or Engineer-in-Charge.

Providing and Supplying of Chairs as per Detail Drawing. Chair is make out of Solid wood. Chair structure is made out of solid wood. Table outside is Fabric Finish. Fabric shade should be selected by Architect or Engineer-in-Charge.

Providing, Supplying and Fixing of Corner Table as per Drawing shown. Size:- 450L X 450W. Corner is make out with Teak wood or Sheashem wood. Structure is also make out with wooden. Wood finish with PU Polish or Malemine polish. Hardware is made out of Ebco/Hafele also use adhesive SH Fevicol. Selection should be as per Architect or Engineer-in-Charge.

Providing, Supplying and Fixing of Center Table. Size:- 900L X 900W. The table made out of Teak wood or Sheashem wood. Finish with Wood finish with PU polish or Melamine polish. Hardware is from Haffele or Hettich, Ebco. Selection should be as per architect or Engineer-in-Charge.

Providing, Supplying and Fixing of Three Seater Sofa as per direction by Engineer-in-Charge or Detail Drawings. Size:- 2100L X 900W. Sofa is made out of Plywood Grade BWP 710. Carcass is made out of Plywood. Sofa framming is made out of plywood. Outside is make out of Approved Shade Fabric as per architect. Sofa will be without shutter and drawers.

Providing, Supplying and Fixing of Two Seater Sofa as per direction by Engineer-in-Charge or Detail Drawings. Size:- 1600L X 900W. Sofa is made out of Plywood Grade BWP 710. Carcass is made out of Plywood. Sofa framming is made out of plywood. Outside is make out of Approved Shade Fabric as per architect. Sofa will be without shutter and drawers.

Providing, Supplying and Fixing of Single Seater Sofa as per direction by Engineer-in-Charge or Detail Drawings. Sofa is made out of plywood grade BWP 710. Carcass is made out of plywood. Sofa's framming is make out of plywood. Outside is make with approved shade fabric by architect. Sofa will be without shutter and drawers.

Supplying & erecting SAMSUNG LED T.V. of 43 inch size. Resolution Full HD (1920x1080) with refresh rate 60 Hertz.2 HDMI ports to connect set top box, Blu-ray speakers or gaming console. 1 USB ports to connect hard drives or other USB devices.20 Watts output with Dolby Digital Plus 2CH Speaker Type.Tizen OS screen with In-Built WiFi,Screen Mirroring,1.5 GB RAM, 8 GB ROM, Supported Apps: Netflix, Prime Video, YouTube, Zee5, etc.Display : Hyper Real Picture Engine, 178 Degree Viewing Angle, Mega Contrast, Contrast Enhancer, PurColor, 1000 PQI.USB /HDMI supported.Audio Wattage 20 watts. Voltage 240 watts. Power source AC.Media format ‎AVI, MPEG . Item weight 6KG 400GM.Battery cell composition Lithium Ion.Speaker Surround Sound Channel Configuration ‎Dolby Digital Plus.

Providing, Supplying and Commissioning of LED (T.V.) Unit work as per Drawing shown. Size:- 2150L X 300W X 600H. The TV Unit made out of 19mm thick plywood with 0.8mm thick selected laminate including 4mm thick veneer or 1mm thick outer selected laminate.TV Unit is made out of Plywood Grade BWP 710. Structure is made out of Plywood. TV Unit inside is make out of as per architect selected Laminate. TV Unit outside is made out of 4mm thick teak wood veneer PU Polish or melamine or 1 mm thick selected laminate polish. Drawers is made as per detail drawing. Leg is made out of wood with necessary finish. Hardware is made out of with Haffele/Hettich/Ebco.

Providing, Supplying and Fixing of Wooden Storage below Wash Basin. Height will be 1.2 m. The storage is made out of 19mm thick plywood as per detail drawings. Make out with MR grade Plywood. Structure is made with Plywood. Inside is made out with 0.8mm thick off white laminate. Outside is made out with 1mm thick approved shade laminate. Drawers will be make out as per Design. Shutters will be make out as per Design. Hardware should be selected from Haffele or Hettich, Ebco. Size will as per actual site condition. Selection as per Architect or Engineer-in-Charge.

Providing and fixing Gypsum false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45 x15 x 0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffuser, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge Gypsum moisture resistant board. (Cost including For suspended from RCC Ceiling /Roof , light cutting gala & also including Scaffolding & Working Platform for any height)

Providing, Fixing,and Commissioning Veneer Finished Wooden Ceiling Making from 12 mm thick plywood (IS 710 ) as per drawing & instruction of EIC/architect& sample approved (complete with Teak wood frame work as per Drawing ).Ceiling finish with 12mm Plywood with Veneered MDF board and 4mm thk veneer with melamine polish finish. Plywood shall be fixed with required fabrication work and ply frame work with all necessary accessories & Hardware Rate shall include cost of making of all cutouts for light fixtures, gadgets,pelmets, grooves,and also provide support/template where ever required The rate shall be in sq.mt for all floors and at all heights including all costs the sample mock of 5 Sqm minimum of the frame work and ceiling) shall be approved from client/architect.5mm Groove shall be provided at the junction of the false ceiling & the wall. The rate shall be in sq m for all floors and at all heights ,Off sets whether hollow or solid in the ceilings including all costs. etc. completed as per as per drawing & instruction of Architect and Engineer-In-charge.

Providing and Fixing Side Table done as per Drawing shown. Size:- 450mm Dia. The table made out of 19mm Thick plywood including selected veneer/laminate. The table make out of Plywood Grade BWP 710. Table Structure should be made out of plywood.Inside is make as per architect selection. Table outside is made out of 4mm thick teak wood veneer. Table leg is made out of wood. Table Hardware is made out of Haffele/Hettich/Ebco.

Providing, Supplying and Fixing of Center Table. Size:- 1000L X 700W. The table made out of Teak wood or Sheashem wood. Finish with Wood finish with PU polish or Melamine polish. Hardware is from Haffele or Hettich, Ebco. Selection should be as per architect or Engineer-in-Charge.

Providing, Supplying and Fixing of Center Table. Size:- 1000L X 600W. The table made out of Teak wood or Sheashem wood. Finish with Wood finish with PU polish or Melamine polish. Hardware is from Haffele or Hettich, Ebco. Selection should be as per architect or Engineer-in-Charge.

Providing, Supplying and Fixing of Three Seater Sofa as per direction by Engineer-in-Charge or Detail Drawings. Size:- 2000L X 900W. Sofa is made out of Plywood Grade BWP 710. Carcass is made out of Plywood. Sofa framming is made out of plywood. Outside is make out of Approved Shade Fabric as per architect. Sofa will be without shutter and drawers.

Providing and Suppying single seater Sofa as per Direction by in-charge or Detailed Drawngs. Size:- Sofa is made out of plywood grade BWP 710. Carcass is made out of plywood. Sofa's framming is make out of plywood. Outside is make with approved shade fabric by architect. Sofa will be without shutter and drawers. Sofa back is made out of finish plywood.

Providing and fixing Pelmets of upto 150mm/200 mm x 150 to 300 mm L shape made of 19 mm thick ply & 4mm thk Veneer with Melamine Polish as per drawing. Rate to be inclusive of lipping, cutting, wastages, necessary fixtures, nails, adhesives, necessary scaffolding, fixing at all heights and for all floors as per drawing and approved sample etc should also take load of all the all roller blinds.

Providing, Supplying and Fixing of Big Curtain as per selection architect or Engineer-in-Charge. Fapbadri Aluminium M Track Curtain Channel For All Accessories Included (Runners,Hooks,End). Curtain shade will be selected by architect.

Providing, Supplying and Fixing of Glass Single Door with Glass Partition. Glass partition is made out with wooden frame polish finish with all necessary hardware. Hardware include with Nail, Screw,Adhesive, Door Closer, Hinges, Handle etc. as per requirement & 10mm thick toughened glass as per detail drawing or Engineer-in-Charge.

Providing and fixing 35 mm thick Flush door Filled with country wood, water proof flush door Single shutters with 4 mm Thk Approved Veneer on both side of the door with maelamine Polish & Lipping edging patti all around the door & Finished with Melamine polish. The door would have vision glass panel with 5mm glass including cutting, fixing all where required. The door with also have accessory like 2 Nos pull SS handles in Brush finish of the size 25mm diameter, 30 cm long made from anti corrosive high grade AISI 316 stainless steel. Providing and fixing one number of 10 mm diameter 20 cm long anti corrosive high grade AISI 316 stainless steel tower bolt, with fixing SS heavy duty screws to the frame & also Provide Hydraulic door closer bottle type (Heavy duty) M.S. body with necessary accessories as approved by Engineer -in-charge etc. complete as per detailed drawing. (All accessories brand: Ozone, Kich As per Architect Selection)

Providing and Applying of Wall painting three coats with Royal touch Plastic paint ( Anti bacterial Paint )of Asian Paint or equivalent approved make list or approved by architect and engineer in any shades and colour as directed on wall surface to give an even shade including applying two coats of Acrylic co‐polymer Stucco putty of Brila or equivalent on a one coat of PVA prmer/Decoprime or equivalent and three coats of paint, scaffolding to at any height with all labour and material thoroughly brushing the surface free from morta droppings and other foreign matter and sand prepared smooth etc. complete. Top coat should have. The substrate must be sound, clean, dry, free from dust, oil, grease and laitance etc. All traces of release agents must be removed. On chalky and dusty surfaces, all loose material must be removed by stiff bristle brushing. The primer / paint application is to be done with the rollers. rate shall be including crack filling and levelling as per manufacturers specfication complete in all respects and to the entire satisfaction of Architects and Engineer-in-Charge.

Providing and fixing vinyl or Polyster Textile wallpaper coverings with approved adhesive on existing plastered surface finished with putty , to give bubble free uniform surface. Any unevenness of the base surface shall be removed before fixing the wall covering as per approved design, complete in all respects and the entire satisfaction of Architect and Engineer-in-charge.

Supply, checking, storing and fixing in position European water closet comprising of Wall hung European W.C. Pan Model KOHLER-K-16717IN-SS-0 or equivalent in white colour with outlet connector (k-1046327-s) , on approved type of chairs,Concealed flushing cistern Model No.Geberit Omega Concealed Cistern with Flush plate or Equivalent or Equivalent as directed,C.P health faucet Model No. JAQUAR-ALD-557 or Equivalent with required length of flexible tube, clamp and bracket for fixing to wall,15 mm C.P. brass heavy quality angle stop cocks Model No.JAQUAR-JAQUAR-ALI-85053 or Equivalent for flushing cistern,C.P. brass 2-way bib cock Model No. JAQUAR-OPP-15041PM or Equivalent,CP Toilet paper holder Model JAQUAR-ACN-1151N or Equivalent,Solid bakelite water closet cover and seat with C.P. hinges and rubber buffers,Fixing W.C. unit with brackets and accessories in position,Necessary pipe connection to PVC / PP / CI soil pipe,Painting bracket with two coats of white enamel paint over a coat of primer. (Final Model of fixture to be selected by architect)

Supply, checking, storing and fixing Under Counter wash hand basin MODEL:K-2215IN-2-0 or equivalent ith ,32 mm heavy plated C.P. waste coupling JAQUAR-ALD-729 or equivalent fitting with pop-up,32 mm heavy plated C.P. bottle trap JAQUAR-ALD-769L250x190 or equivalent with cleaning eye with extension piece and wall flange,Painting brackets with two coats of white enamel paint over one coat of primer,CP Basin Faucet K-5683IN-4ND-CP or equivalent with 15 mm C.P. brass heavy grade flexible inlet connection with C.P. nut (minimum length 450 mm) made to measure. (Final Model of fixture to be selected by architect)

Supply, checking, storing & fixing C.P. brass towel ring MODEL:JAQUAR-ACN-1121BN or equivalent Round to PVC cleats with C.P. brass screws including cutting and making good the walls wherever required . (Final Model of fixture to be selected by architect)

Supply, checking, storing & fixing C.P. brass angle valve for basin & Sink MODEL:JAQUAR-ALI-85053 or equivalent, of approved quality conforming to IS:8931 for a) 15mm Nominal Bore (Final Model of fixture to be selected by architect)

Supply, checking, storing & fixing C.P. brass bib cock MODEL:JAQUAR-ALI-85037 or equivalent of approved quality conforming to IS:8931.(Final Model of fixture to be selected by architect) (a) 15mm Nominal Bore

Supply, checking, storing & fixing of Heavy class S.S. Grating Model No. Chilly-CCT-SFC-127 or Equivalent with Mosquito /Cockroach proof S.S. strainer of approved design by Interiror including setting in floor with cement motor to match with floor finish as per architect requirement suitable for FD (Floor drain) and FT (Floor trap). Note : Size of trap is vary as per final Product Selection.

Supply, checking, storing & fixing CP Over Head Rain shower MODEL:JAQUAR-OHS-35497 or equivalent complete as per instructions of the engineer-in-charge.

Supply, checking, storing & fixing CP single lever wall mixer MODEL:K-72290IN-4FP-CP or equivalent with Concealed body Shower Valve & Bath spout K-99061IN-CP complete as per instructions of the engineer-in-charge.

Supply,Installation,testing and commissioning of Silent soil & waste pipes of PP(Polypropylene) material As per EN 12056 with Min. density 1.2 g/cm3 with mineral wool (for noise reduction) with push fit lock seal joints, with necessary fittings such as making proper connections to equipments including all necessary fittings and specials such as bends, tees, reducers,Wye , Door tee , Vent cowl,Access pipe for claening in required interval(on service floor & basement) ,nuts,bolts,gaskets,supports and plugs etc. Fixing at wall/ ceiling level supported by clamps, fire collars,expansion joints,Y branches, hangers etc. as per the specification,drawings and schematics. All hangers, clamps, brackets,anchor/fixed support,guides,rollers etc. shall be of galvanized iron unless specified otherwise and then supply and installation of the same shall also be excluded for rates under this head. Welding of any kind on the galvanized support / hanger shall not be permitted.(The pipe length inserted in the fitting shall not be measured for payment) (Pipes for soil , waste for internal toilet & Shaft). 40 mm

Supply,Installation,testing and commissioning of Silent soil & waste pipes of PP(Polypropylene) material As per EN 12056 with Min. density 1.2 g/cm3 with mineral wool (for noise reduction) with push fit lock seal joints, with necessary fittings such as making proper connections to equipments including all necessary fittings and specials such as bends, tees, reducers,,Wye , Door tee , Vent cowl,Access pipe for claening in required interval(on service floor & basement) ,nuts,bolts,gaskets,supports and plugs etc. Fixing at wall/ ceiling level supported by clamps, fire collars,expansion joints,Y branches, hangers etc. as per the specification,drawings and schematics. All hangers, clamps, brackets,anchor/fixed support,guides,rollers etc. shall be of galvanized iron unless specified otherwise and then supply and installation of the same shall also be excluded for rates under this head. Welding of any kind on the galvanized support / hanger shall not be permitted. (The pipe length inserted in the fitting shall not be measured for payment) (Pipes for soil, waste for internal toilet & Shaft). 75 mm

Supply,Installation,testing and commissioning of Silent soil & waste pipes of PP(Polypropylene) material As per EN 12056 with Min. density 1.2 g/cm3 with mineral wool (for noise reduction) with push fit lock seal joints, with necessary fittings such as making proper connections to equipments including all necessary fittings and specials such as bends, tees, reducers, Wye, Door tee, Vent cowl, Access pipe for claening in required interval(on service floor & basement), nuts, bolts, gaskets, supports and plugs etc. Fixing at wall/ ceiling level supported by clamps, fire collars,expansion joints,Y branches, hangers etc. as per the specification, drawings and schematics. All hangers, clamps, brackets, anchor/fixed support, guides, rollers etc. shall be of galvanized iron unless specified otherwise and then supply and installation of the same shall also be excluded for rates under this head. Welding of any kind on the galvanized support / hanger shall not be permitted.(The pipe length inserted in the fitting shall not be measured for payment) (Pipes for soil , waste for internal toilet & Shaft).110 mm

Supply , installation , testing and commissioning Polyproplene (PP) 110mm x 110mm size P trap (Floor trap) of self cleaning design with Min. 50mm water seal with and without vent arm jointing with push fit rubber ring socket fittings complete, cutting chases / hole in floors / slabs and bringing the same in proper condition and shape after placing the trap in right position in case of suspended / open plumbing or setting the trap in 1:2:4 CC in case of concealed plumbing , etc. complete, as required. The trap shall be of following sizes: Temporary airtight PVC cover to be provided to prevent dirt entry.

Supply , installation , testing and commissioning Polyproplene (PP) 110mm x 75mm size Multi floor trap/Height riser of self cleaning design with Min. 50mm water seal with and without vent arm jointing with push fit rubber ring socket fittings complete, cutting chases / hole in floors / slabs and bringing the same in proper condition and shape after placing the trap in right position in case of suspended / open plumbing or setting the trap in 1:2:4 CC in case of concealed plumbing , etc. complete, as required. The trap shall be of following sizes: Temporary airtight PVC cover to be provided to prevent dirt entry. ( In sahft )

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. For Cold Water Lines ( Domestic) (Inside Toilet)(Make:Astral,Ashirvad,Finolex) 20 mm dia Pipes ( SDR 11 )

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. For Cold Water Lines (Domestic) (Inside Toilet (Make:Astral,Ashirvad,Finolex) 25 mm dia Pipes ( SDR 11 )

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. For Cold Water Lines (Domestic) (Inside Toilet) (Make:Astral,Ashirvad,Finolex) 32 mm dia Pipes ( SDR 11 )

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. For Cold Water Lines ( Domestic) (Inside Toilet)(Make:Astral,Ashirvad,Finolex) 40 mm dia Pipes ( SDR 11 )

Providing and fixing forged brass lever operated ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 16 kg/cm2 etc. complete in all respect.(Make:Sant,Zoloto,leader) 50mm dia

Providing and Laying Underground drainage System Foam Core SN8 pipe complete with all fittings excavation of trench 0.7m wide and depth varying from 0.75m to 2.4m , and refilling the same after laying of drain and concrete encasement in concrete 1:3:6 grade concrete with minimum thickness of encasement 100m thk & as per provided drawings by architect,techincal specification and as directed by the authority EIC.(Make:Supreme,Astral or equivalent ) 150 mm dia

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mmx300mm size (inside) with standard weight.(i)Square mouth traps.(B)150mm x 100mm size P or R type

Constructing manhole with R.C.C top slab in 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrte 1:3:6 mix (1 cement : 3 coarse sand : 6 brick bats 40 to 50 mm nominal size) inside plastering 15 mm thick with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a floating coat of neat cement slurry and making channels in cement concrte 1:2:4 mix ( 1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) finished smooth complete including curing & testing (I) Inside size 900 mm x 1200 mm and 1.50 meter deep including FRC cover with frame size 560 mm diameter (A) with 230 mm thick walls of brick masonry using bricks having crushing strength not less than 35 Kg / Sqcm in cement mortar 1:5 (1 cement : 5 coarse sand) (1) A-type depth 0.90 meter for 150 mm diameter sewer.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line. (more than 10 ton)

Providing supplying mixing & applying two coats of approved make ready to use acrylic polymer of modified cement base ,flexible water proofing slurry to a thickness of 3 mm over the bottom (a) First layer of slurry of cement @ 0.488 kg/Sq.Mt. mixed with water proofing cement compound @ 0.253 kg/ Sq.Mt.. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/Sq.Mt. mixed with water proofing cement compound @ 0.126 kg/Sq.Mt.. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. & sides of wall up to 300 mm ht (as per required) of toilet area , including preparation of surface finishing, curing etc all complete at levels as specified by the Architect preferably below PCC (75mm to 150mm thk) & above PCC as per manufacturer's specification. (including 230mm to 300mm th. light weight material filling & 100 mm to 150mm raised floor from floor lvl As required & Only plan area shall be considered for Measurement)

Providing & laying 1200mm x 1200mm Flooring/Wall dado/Skirting of 1st quality of Matt Finished Vitrified tiles. (Qutone, Simpolo, Nexion or equivalent brand) 8 mm thick of approved shade & sample. The tiles to be Laid in straight line in Proper line level & pattern on ahead of 1:4 cement mortar as per required Sand & cement mortar Bedding.tiles Joints shall be grouted with Polymer Chemical adhesive , Laticrete 325 or equivalent including filling the joints with in 3-4 mm width and10 mm Depth including cost of PVC Spacers, Rubbing, Cleaning and finishing the surface etc. complete.& Tile must to free from colour & size variation and free of bends. & Cost included of Laying 12 to 15 mm Th. floor covering protection coat of POP over flooring work with bedding of polythene paper till handing over cleaning the surface the work to be handed over in a clean condition. Complete as per directed by Architect or Engineer-in-Charge.

Providing and Fixing Granite counter upto 600mm wide Prepolished 20mm thk. 1st quality Black Granite slab. Counter to be made out of sandwich type construction with base in kadappah / Kotah stone overlaid in Granite 75mm wide facia on front & exposed sides. Counter to be held vertically Kotah stone Support & necessary cut outs in granite & kotah stone to take basin and to take necessary Pipes & cost including of required water line 12mm taps/ etc as per detail drawing. Rate also including of ready made aluminium profile shutters with louvered panel shutter operated on auto closing hinges & internal storage made from 19mm prelam ply with individual locking arrangement & necessary hardware like SS handles/ ball catch complete as shown in drg. & design or as directed by Engg-in-charg.

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling tile work in floors and skirting laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm