UT Administration Of Dadra And Nagar Haveli Tender

Supply, installation, testing and commissioning of cabinet type Celing suspendend single skinned Centrifugal Exhaust Air Unit 40 mm static 3900 CFM. Complete in all respect including all required for the same.

Supply, Installation, testing and commissioning of hot dip GI perforated type cable tray with all accessories like coupler, GI nut bolts,bend, tee, reduser etc as per specification and drawings complete with all required hardware : 150 x 100 made out of 2 mm thick perforated type. Complete in all respect including all required for the same.

Providing and fixing approved make Ladder type cable tray. Made from M.S sheet. The cable tray should be bended as per IS 2062/1079 shall be fabricated of double bended channel section longitudinal members with single bended Channel section. Rungs of members welded to the base of the longitudinal members at 250 mm c/c spacing . as per IS and shall be coated with hot dip galvanizing as per IS 2629/4759. with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge.. (10) 300 X 100 X 2.0 mm Thick

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (A) with medium class Rigid PVC pipe and accessories (d) 3 wire 4 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (A) With medium class Rigid PVC pipe and accessories (d) 3 wire 2.5 sq. mm

Supplying, unloading at site, assembling, levelling, grouting, erecting, Testing, & Commissioning of Panels with powder coated fabricated from CRCA sheet & folded channel totally enclosed cubical type with pad lock arrangement complete in all respect. The successful tenderer will have to prepare general arrangement with dimensions & get it approve through Engineer In charge / Consultant. Panel should be as per detail single line drawing with required noes of incoming and outgoing feeders and accessories complete in all respect. OT UPS Power Panel As per Single line diagram. Complete in all respect including all required for the same.

Supplying, unloading at site, assembling, levelling, grouting, erecting, Testing, & Commissioning of Panels with powder coated fabricated from CRCA sheet & folded channel totally enclosed cubical type with pad lock arrangement complete in all respect. The successful tenderer will have to prepare general arrangement with dimensions & get it approve through Engineer In charge / Consultant. Panels should be as per detail single line drawing with required noes of incoming and outgoing feeders and accessories complete in all respect. Garbage Chute & MGPS Panel As per Single line diagram. Complete in all respect including all required for the same.

Supplying, unloading at site, assembling, levelling, grouting, erecting, Testing, & Commissioning of Panels with powder coated fabricated from CRCA sheet & folded channel totally enclosed cubical type with pad lock arrangement complete in all respect. The successful tenderer will have to prepare general arrangement with dimensions & get it approve through Engineer In charge / Consultant. Panels should be as per detail single line drawing with required nos of incoming and outgoing feeders and accessories complete in all respect. Medical Gas & Vacuum Plant As per Single line diagram. Complete in all respect including all required for the same.

Supplying, unloading at site, assembling, levelling, grouting, erecting, Testing, & Commissioning of Panels with powder coated fabricated from CRCA sheet & folded channel totally enclosed cubical type with pad lock arrangement complete in all respect. The successful tenderer will have to prepare general arrangement with dimensions & get it approve through Engineer In charge / Consultant. Panels should be as per detail single line drawing with required nos of incoming and outgoing feeders and accessories complete in all respect. CSSD As per Single line diagram. Complete in all respect including all required for the same.

Supplying, assembling, grouting, levelling, installation, Connecting testing and commissioning of D.B of specified make but without MCB / ELMCB/MCCB etc but with all internal busbar as per requirement. Supplying, erecting, testing and commissioning of only TPN D.B. (i.e. 12-way TPN PPI D.B.) with Incomer 63A FP MCB - 1 Nos | 63A DP RCCB 30mA - 3 Nos | 16A SP MCB - 36 Nos. Complete in all respect including all required for the same.

SITC of 32A FP MCB With Enclosure. Complete in all respect including all required for the same.

SITC of 40A/63A FP MCB With Enclosure. Complete in all respect including all required for the same.

SITC of 125A TPN MCCB 25KA With Enclosure. Complete in all respect including all required for the same.

Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost charger with IGBT base rectifier & Inverter & sealed maintenance free SMF batteries. The charger having operating capacity for input 160-270V AC & inverter having output 230V,50 Hz Ac with 0.8 load power factor with battery, over/under voltage output with over load & short circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following power backup.with MS painted batteries stand, 10% Overload capacity for momentary load. [H} 10 KVA with 1Hr Backup

Supply, testing and laying and commissioning of XLPE Unarmoured cable of 1100 V grade of Copper Conductor of following sizes. 25 Sq.mm x 3c CU. Cable. Complete in all respect including all required for the same.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (A) 4 core 10 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (C) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (B) 4 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

Supply, Installation, Testing and Commissioning of Tabletop 10.9" in. or higer diagonal, with required tabletop bracket kit, with automation control app and required lic..as per technical specification etc. as required. Complete in all respect including all required for the same.

Supply, Installation, Testing and Commissioning of video matrix bundle Single CAT 6 connectivity between TX and RX devices, up to 100m, with Power delivery from TX to RX, Video, USB2.0, Ethernet, OCS and Serial USB-C input connectivity on the TX device for 4K Video, Audio, Data, and Power (Video, Audio, Data and Power over a single USB-C connection) USB-C charging up to 100W (120W total) on the TX Multiple USB 2.0 connectivity for any type of USB device (Camera, speakerphone, touch monitor, USB-HID devices etc.) Both on the TX and the RX Independent USB Host switching layer for multiple USB hosts, up to 8 devices (4x at the TX side, 4x at the RX side) Room device control via Ethernet (TCP/IP) or Serial (2x at TX device, 1x at RX device) , as per technical specification etc. as required. Complete in all respect including all required for the same.

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed (b) 25 mm

Fabrication work for BMS Panel to mount in acoustic with powder coating (Size should be as per BMS panel). Complete in all respect including all required for the same.

Providing material and labour for placing 595X595MM 06mm thick plywood of greenply, century make, plywood shall be fixed above the mineral fiber sheet for downlight supproting with necessary cutting of sheet as per drawing & specifications and directed by Engineer in charge. Complete in all respect including all required for the same.

Providing and fixing cladding between expansion joint & column using 12mm Hilux board on Saint Gobain make Gypserra 48mm G.I. stud framework including jointing and finishing and as per directed by engineer in charge. Complete in all respect including all required for the same.

Providing and laying vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser, of steps, wall, laid with cement based high polymer modified quick set tile, adhesive (water based) conforming to IS:15477, in average 6 mm thickness, including grouting of joint (payment for grouting of joint to be made separately).

Providing and fixing at location a signs M.S internal hollow tube structure using Cosign Make- Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) International standards, with 10 year warranty under normal working conditions. Sign is including all extruded aluminium profiles profiles including i) 4 base profiles mill finished glossy appearance or texture, base profile with slots to accomodate 50x 50 mm , 100x50 mm or 150x 50 mm,(to create max depth of 200 mm from either of the combination aftet mounting base & cover profiles, M.S structure & 'V' notch groove to guide self tapering screws,directly to be screwed with ,Internal M.S structure with help of stainless steel high tensile strength zinc coated self tapering CSK screws (length as per requirement) ii) 4 cover profiles of eliiptical shape premium anodised with intel- locating faciltiy with base profile for posiotioning. to be screwed with base profile (screws not visible from outside) after cover profile is mounted to base iii) Top & bottom ACP egde profile premium grade anodised to cover edges of ACP free mounting without drilling or screwing. iv) ACP connect profile with minimum display free mounting without lockuing & drilling. etc ,Ultra violet print on ACP or ACRYLIC sheet can be done. Also, arrangement is done to (ACP or Acrylic 3 mm thick can be Inserted in Cosign totem profile slots). Top hat asper profile shape (aluminium 2-3 mm thick) is used to cover top part, 2mm thick opaque white acrylic(or clear)can be pasted on text panels as numbers with help of 3M make adhesive.also LED (Back lite) modules or edge lite modules. CosignTotem profiles screwed fixed with internal M.S structure are installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Dipslay board Size 3300 MM H x 1200MM W x 150MM T . Complete in all respect including all required for the same.

Pylon signage - 2400 x 750MM Providing and fixing at location a signs made up of Cosign India Pvt Ltd make I sign -display signage with 50mm depth Aluminium extrusion Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15- 20 microns) Flatness & Twist of profile within 1.5 mm / meter length, with 10 years warranty under normal working conditions. Media accomodation depth of 8 mm avialble for pasting on dual lock or strong two way adhesive. M.S fabrication slot of 65 mm depth for internal M.S structure.Media upto 6 mm thickness can be pasted or mounted with help of dual lock tape .assembled totem can be edge lite with help of edge lite modules or back lite with help of back lite modules.CosignTotem profiles screwed fixed with internal M.S structure are installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Addinig Two side Dipslay board Size 1500 MM x 750MM X 25MM both side display with ACP Sheet & Reflectfive sign. Complete in all respect including all required for the same.

Surface/ wall mounted signs - 457X150X18 Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as perInternational standards, with 10 years warranty under normal working conditions.Sign has profile with curvature .Sign is single sided with1 aluminium profile and 2 plastic endcaps.Sign is including all plastic injection moulded end caps grey or black in shade which are directly screw fitted & help of zinc coated self tapering screws (matching shade of plastic endcaps),media upto 0.5 or 1 mm thickness (paper,vinly) can be inserted in locking slots provided by virtue of design of profiles,0.5 mm polycarbonate sheet for cover or pretection mediaof Cosign make Strato panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of theengineer-in-charge. Complete in all respect including all required for the same.

Wall projected - 350X150X30 Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as perInternational standards, with 10 years warranty under normal working conditions.Sign has profile with curvature .Sign is doublele sidedwith 2 aluminium profile joined with strong foam based two way adhesive (3M recommended) and 2 plastic endcaps & 1 aluminium wall mounting bracket.Sign is including all plastic injection moulded end caps grey or black in shade which are directly screw fitted & help ofzinc coated self tapering screws (matching shade of plastic endcaps)media upto 0.5 or 1 mm thickness (paper ,vinly) can be inserted inlocking slots provided by virtue of design of profiles,0.5 mm polycarbonate sheet for cover or pretection media of Cosign make Stratopanels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Complete in all respect including all required for the same.

Surface/ wall mounted signs - 120X109X18 Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as perInternational standards, with 10 years warranty under normal working conditions.Sign has profile with curvature .Sign is single sided with1 aluminium profile and 2 plastic endcaps.Sign is including all plastic injection moulded end caps grey or black in shade which are directly screw fitted & help of zinc coated self tapering screws (matching shade of plastic endcaps),media upto 0.5 or 1 mm thickness (paper,vinly) can be inserted in locking slots provided by virtue of design of profiles,0.5 mm polycarbonate sheet for cover or pretection mediaof Cosign make Strato panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of theengineer-in-charge. Addinig Two side Dipslay board Size 1650 MM x 600MM both side display with ACP Sheet & Reflectfin signages . Complete in all respect including all required for the same.

Floor Directory Signage - 1000X2000X15MM Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with aluminium side tracks and common click clips for panel fitting. a.Sign is including all plastic injection moulded clips black in shade which are slided in side tracks ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Complete in all respect including all required for the same.

Floor Directory Signage - 762X1500X15MM Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with aluminium side tracks and common click clips for panel fitting. a.Sign is including all plastic injection moulded clips black in shade which are slided in side tracks ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Complete in all respect including all required for the same.

Ceiling Hanging - 1200X250X24MM Providing a signs made as using Cosign India make Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is double sided 24 mm depth profile with media accomodation depth of 5 mm media of ACP acrylic upto 3 mm thickness can be pasted directly on frames or attched on frame with help of dual lock tape.Sign to be fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Complete in all respect including all required for the same.

Surface/ wall mounted signs - 200X150X18MM Providing sign of Cosign make Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with premium grade anodizing (Thickness 15-20 microns) as peinternational standards, with lifetime warranty under normal working conditions. Profile to form frame with overall depth of 10 mm with media of thickness upto 3mm. 2 mm thick acrylic/ACP . I-sign Fix profile of Cosign make with M.S zinc coated corners with grub screws. Installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Complete in all respect including all required for the same.

Changable snap frames - 451X625X20MM Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions. Sign flip profiles with 32 mm visible border.Sign has high quality plastic moulded base with slightly flexible in nature, with wall mountiing screw position hidden beneath the flip profiles. and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Complete in all respect including all required for the same.

Surface/ wall mounted signs - 150X200X18MM Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as perInternational standards, with 10 years warranty under normal working conditions.Sign has profile with curvature .Sign is single sided with1 aluminium profile and 2 plastic endcaps.Sign is including all plastic injection moulded end caps grey or black in shade which are directly screw fitted & help of zinc coated self tapering screws (matching shade of plastic endcaps),media upto 0.5 or 1 mm thickness (paper,vinly) can be inserted in locking slots provided by virtue of design of profiles,0.5 mm polycarbonate sheet for cover or pretection mediaof Cosign make Strato panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of theengineer-in-charge. Complete in all respect including all required for the same.

Surface/ wall mounted signs - 200X150X18 Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as perInternational standards, with 10 years warranty under normal working conditions.Sign has profile with curvature .Sign is single sided with1 aluminium profile and 2 plastic endcaps.Sign is including all plastic injection moulded end caps grey or black in shade which are directly screw fitted & help of zinc coated self tapering screws (matching shade of plastic endcaps),media upto 0.5 or 1 mm thickness (paper,vinly) can be inserted in locking slots provided by virtue of design of profiles,0.5 mm polycarbonate sheet for cover or pretection mediaof Cosign make Strato panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of theengineer-in-charge. Complete in all respect including all required for the same.

Surface/ wall mounted signs - 212X212X18 Providing sign of Cosign make Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with premium grade anodizing (Thickness 15-20 microns) as peinternational standards, with lifetime warranty under normal working conditions. Profile to form frame with overall depth of 10 mm with media of thickness upto 3mm. 2 mm thick acrylic/ACP . I-sign Fix profile of Cosign make with M.S zinc coated corners with grub screws. Installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Complete in all respect including all required for the same.

Surface/ wall mounted signs - 200X150X18 Providing sign of Cosign make Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with premium grade anodizing (Thickness 15-20 microns) as peinternational standards, with lifetime warranty under normal working conditions. Profile to form frame with overall depth of 10 mm with media of thickness upto 3mm. 2 mm thick acrylic/ACP . I-sign Fix profile of Cosign make with M.S zinc coated corners with grub screws. Installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Complete in all respect including all required for the same.

Hanging Emergency Exit Sign - 310X225X55MM Providing ready sign & fixing at location a Cosign make emergency exit sign- illuminated, surface mount (wall or ceiling) Dual sided made up of plastic material , battery backup of 3 hours (180 mins) .Battery life of 300 cycles of charge & discharge Li- ion battery 3.7 Volt, 100 mA, Charge time of 24 hours. Input voltage 220-240 Volt A.C, 50/60 Hz. Viewing distance 30 meter, degree of protection IP20 (rating for protection against solid object upto 12 mm) white light colour full back (white colour) LED illumination with green white coloured graphic inserted on both sides on 0.4 mm PC (sizes, texts, symbols or graphics as per standard safety norms & regulations) graphic options of -left ,right, up staircase down staircase. Test facilty button self test plus auto self test, opreration in maintained and non maintained mode (power saver mode).Sign with 12 months warranty for electric circuit & 6 months warranty for battery. Sign provided with dual mounting arrangement of mounting on wall & celing both ( with flat rigid support/base).Sign is including all connection wires (upto 1 mtr) & high tensile strength zinc coated self tapering screws (4 nos with screw wall plastic packing), installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Complete in all respect including all required for the same.

EXTERNAL SIGN BAORD & LOGO Providing & suppling MS Powder coated Letter with illuminated whtie light with insall on Building Per letter size 1200 MM H & 30 MM Emboss letter with back side lite, with powersupply & cablilng on site , M.S Letter are installed at site ion wall and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Complete in all respect including all required for the same.

TAKTI - 1800X1200MM Providing & fixing in position SS name plateletter as per approved drwaing, SS304 matt finish having thickness of 18 gauge / 12 mm thikness , complte job as requite and as per the directio of engineer( name plates are to be fixed over building wall up to floor ground lever hight specified location as per drawing to the satisfaction of the engineer-in-charge. Complete in all respect including all required for the same.

INR Zero Only