UT Administration Of Dadra And Nagar Haveli Tender

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and consolidating etc. complete. (more than 10 ton).

Providing material and labour for filling in foundation and plinth with RUBBLE under floors including filling gravel in gaps and consolidating deposited layers by ramming water etc. Complete.

Providing material and labor for cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) with sheathing steel and curing complete including cost of formwork in (A) Foundation and Plinth.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork but excluding reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete, as directions of Chief Engineer in charge Complete.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding the Cost of reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts upto all floor level. etc complete as directed by Engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding cost of reinforcement for reinforced concrete work in Lintels, Beams, Girders and Cantilever upto all floor level etc complete as directed by Engineer-incharge.

Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork and reinforcement forreinforcedconcrete workin(C)Slabs,landing,shelves,BalconiesLintels,Beams, Girders and Cantilever upto floor two level.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding cost of reinforcement for reinforced concrete work in (C) Slabs, landing, shelves and Cantilever upto all floor level, etc complete as directed by engineer-incharge.

Providing material and labour for TMT Bar FE500D primary reinforcement steel for R.C.C. work including bending, binding and placing in position complete, upto allfloor level etc, as directed by chief engineer-incharge. Make: TATA, JSW, SAIL OR EQUIVALENT

Providing material and labour for Masonary work using Autoclaved Aerated Concrete (AAC) light weight concrete block having crushing strength not less than 35 kg/sqcm for super structure upto all floor level in jointing mortar, complete as per Technical specification or as directed by engineer-in-charge.

Providing 10mm thick cement plaster in single coat onbrick/concrete walls for interior plastering upto al floor level andfinished even and smooth in (i)Cement mortar 1:3 (1-cement:3-sand)

20mm thick sand faced cement plaster on walls upto height 10metres above ground level consisting of12mm thickbacking coat ofC.M. 1:3 (1-cement : 3-sand) and 8mmthick finishing coat of C.M.1:1 (1-cement : 1-sand) etc.complete.

Providing material and labor for applying Two coats of wall care Putty & two coat of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.as directed by engineer in charge complete. Make: Birla White.Asian Paints, JK Wall Care Putty or equivalent

Providing material & labour for Internal Wall painting (two coats) with Emultion paint of approved brand and manufacture including primer coat on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. as directed by engineer in charge complete. Paint should be washable grade Make: Jotun JollyFix, Asian Paints Royale, Berger Paints - Bison Glow, Dulux Paints -SuperClean or equivalent.

Supplying & Providing two coat of primer and two coats of Texture Paint on Exterior Surfaces at all heights of surfaces including cleaning, preparing the surface, applying primer - scraping by sandpaper, scaffolding etc. including - (a) All surface preparation, suitable number of base coats required, primers and suitable finishing to the complete satisfaction of the Engineer in Charge, (b) Scaffolding and all leads and lifts,(c) Proper curing in between the two subsequent coats, (d) Touch ups to the paint after the scaffolding is removed, (e) All measurements for paints to be as per IS-1200. f) Minimum Guarantee of Ten Years Waterproofing and Paint performance for all external paints by manufacturer . Make - Asian Paint Ultima Allura Torino, Jotun Jotashield Tex Fine OR Equivalent.

Providing material and labour for fixing Natural brick cladding godhra type in combination with premium resin including tile adhesive chemical, protective coating, transportation and application. Tile/brick having L 215 MM x W 102 MM X H 65 MM havnig strength 75kg/cm2 and water abosorption 14%. weight approx. 2.6 kg. Leave space as per the architectural requirement by putting spacer (this may vary from project to project) on all sides of each brick. ensure to leave appropriate space between each brick. Use paint brush to maintain the uniformity of the grout. Make sure the brushing should not damage the color tone of the brick. Also, before the mortar dries, use the wet sponge to clean off any mortar that may have spilled or overflowed from between the brick cladding. Make : Jay jalram brickwork or equivalent as approved by architect or engineer-in-charge.

Providing material and labour for fixing artificial curb stone cladding made from natural stone powder grains in combination with premium resin including tile adhesive chemical, protective coating, transportation and application. Make & MODEL: CURB- TRAVENTINO. Stone/Tile/brick having thickness of 4mm.Leave a 6 to 8mm space by putting spacer (this may vary from project to project) on all sides of each brick. ensure to leave appropriate space between each brick. Use paint brush to maintain the uniformity of the grout. Make sure the brushing should not damage the color tone of the stone. Also, before the mortar dries, use the wet sponge to clean off any mortar that may have spilled or overflowed from between the stone cladding. Upto any height with all lead & lift.

Providing material and labor for Structural steel work (Confirming to IS 4923-1997) riveted, bolted or welded in builtup for all type sections, in framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per the structural designs and as directions of chief engineer in charge Complete.

Providing material and labour for fixing ISI marked Single Shutter flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with including ALUMINIUM SECTION frames 15 cm x 7 cm 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws, with Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS :2046 Type S, including cost of adhesive of approved quality 1.0mm Thick on both face, with Providing and fixing S.S. tower bolts (barrel type) with necessary screws etc 200mm long x10mm dia, with Providing and fixing S.S. Door Aldrop with necessary screws etc. 300mm long x16mm dia, Providing and fixing S.S. Door Aldrop with necessary screws etc 250mm long x16mm dia, with Providing and fixing S.S. Pipe Handle for door 30cm size on both side of Door shutter, with Providing and fixing S.S hanging type floor door stopper with necessary screws, etc. complete as directed by Engineer in charge. All S.S Shall be ASIS 304 Grade. Plywood Make:- Century Ply Laminates, Greenply Industries Limited, SRG Ply & Boards or equivalent.

Providing, supplying & fixing of glazed Openable TWO TRACK/THREE TRACK Window in slider/slide up/vertical/casment type with any other finish as instructed by archtiect or engineer-in-charge, made out of multi-chambered ALUMINIUM sections with TPV gaskets having isolated drainage and reinforced with Galvanised Iron profiles throughout the window. The outer frame having a overall size of 60 x 55 mm with reinforcement of 1 mm thickness, mullion with overall size of 74 x 60 mm with reinforcement of 1 mm and sash with overall size of 75 x 60 mm with reinforcement of 1.5 mm thickness. Glazing bead for fixing of glass shall be of size 34 x 20mm and coextruded with gasket. Composition of profile shall consists a minimum of 8 PHR of TiO₂ for every 100 parts of PVC resin. Windows shall be provided with 5 mm plain float glass, standard hardware, multi-point locking system and friction stays. Wall thickness of frame, mullion & sash shall be 2.2 - 2.4 mm

Providing material & labour for Fixing 18 mm thick Granite slab (18mm thick) 1 side mirror polished, premoulded and prepolished) machine cut for platforms, vanity counters, door window,sills,jambs,soffits facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding on all exposed edges and polishing to edge to give high gloss finish etc. complete. at all levels.

Providing and laying polished Kota stone slab flooring over 20mm(Average) thick base of cement mortar 1:6 (1-cement : 6-coarsesand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over Existing concrete floor including making the surface rough and making bond with the existing surface and jointing with grey cement slurry mixed with pigment to match theshade of slab including rubbing and polishing etc. complete.(A)25mm thick

Providing & laying Vitrified tiles 8 to10 mm thick,24"x24" in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 ( 1 cement: 3 coarse sand) finishing with flush pointing in white Cement. For flooring. Make: Nitco, Simpolo, Kajaria or equivelant

Providing & laying Vitrified tiles 8 to 10 mm thick,24"x24" in Skirting risers of steps and dedo on 10mm thick cement mortar 1:3 ( 1 cement: 3 coarse sand) and jointed with white cement slurry. complete. For Skrting Make: Nitco, Simpolo, Kajaria, jonson equivelant (Primer quality)

Providing material and labour for applying Chemical Waterproof Coating PU One Coat epoxy primer and Three coat polyrethane coating including preparation of surface as required for terraces and Toilets. as approved by the Chief engineer-incharge with a guarantee of 10 years. Complete. Make:- MYK Arment, Pidilite, Sika or equivelant.

Providing and fixing pre-cast concrete kerb stone of gray cementbased concrete block 60cm length,30cmheight and 15cm thick of M250 grade concret as per approved design and includingexcavation for fixing in proper line and level,filling the joint withC:M 1:3 (1cement:3fine sand) etc complete.

Providing material & labour for fixing Sand blasted pre-cast concrete High Strength High Finish (HSF) paver block 60mm thick as per design with percentage of water absorption not more than 6%, compresive strength not less than 250 kg/Sqm. Tensile splitting strength (as per EN 1338) not less than 3.6 Mpa any colours as per approved design including 75mm Sand layer for levelling and filling the joint with sand in proper line and level etc complete. Make:- Vyara and Supertiles or equivalent.

Providing material and labor for GARDEN SOIL:- Supplying on site garden soil well sieved 90% to pass through I.S. sieve of 10mm size free from stones rubbish like dried grass roots and other such materials. The soil should be ftesh from quarry. The colour of the soil generally be red. The soil will be measured by measuring box.(Farma) (Item includes Royalty charges,, Transporting, Ioading unloading etc.) lead charges for 30 k.m. is considered.

Providing material and labor FARM YARD MANURE : Supplying on site well decayed, well dried, well powdered, without clods and free from stones, dried grass and other rubbish material. The colur of the manure generally be black. The manure will be measured by measuring box. (Farma) (Item includes Transporting, loading unloading etc.) lead charges for 20 km is considered.

Providing labour for MIXING GARDEN SOIL/SILT & MANURE THROUGHLY WELL, Watering Pervious night, Planting required plant species, lawn gress as dricted etc. complete.

Providing material and labor for LAWN :- Supplying and planting reuired variety of lawn grass as directed and maintaining till well established by watering, weeding clipping, rolling etc. complete.

Providing material and labor for TREES:- (minium height to 3 mtr.):- digging pit with size 0.9mx0.9mx0.9m removing and conveying unwanted stuff to a required stuff to a required distance as directed. Filling the pit with approved excavated material up to a height of 0.30m. And remining height of 0.60m with fresh garden soil and manure in 3:1 proportion . mixing soil and manure thoroughly well, levelling, as directed , watering previous night, planting two to three year old , minimum 2.0 mtr. height , healthy trees sapling as per specification. maintaining till well established by watering , weeding, stirring of soil staking replacing of casualties etc. complete.

Providing material and labor for TREES:-( height to 1.5 mtr.):- digging pit with size 0.9mx0.9mx0.9m removing and conveying unwanted stuff to a required stuff to a required distance as directed. Filling the pit with approved excavated material up to a height of 0.30m. And remining height of 0.60m with fresh garden soil and manure in 3:1 proportion . mixing soil and manure thoroughly well, levelling, as directed , watering previous night, planting two to three year old , minimum 2.0 mtr. height , healthy trees sapling as per specification. maintaining till well established by watering , weeding, stirring of soil staking replacing of casualties etc. complete.

TREES:-Supply and erecting Morpankhi Hedges (minium height to 2.5 mtr)- digging pit with size 0.9mx0.9mx0.9m removing and conveying unwanted stuff to a required stuff to arequired diatance as directed. Filling the pit with approved excavted material up to a height of 0.30m. And remining height of 0.60m with fresh garden soil and manure in 3:1 proporation . mixing soil and manure thoroughly well, levelling, as directed , watering previous night, planting two to three year old , minium 2.0 mtr. height , healthy trees sapling as per specification. maintaning till well established by watering , weeding, stirring of soil staking replacing of casualties etc. complete.

HENNA PLANTATION :- Excavting the ground to required depth of 30 cms, removing and coveying unwanted stuff to a required depth as directed. Filling fresh garden soil and manure in excavted area 3:1 poroporation to a height of 30 cms. Mixing garden soil and manure thoroughly well developed shurbs plants, 0.50 mtr. height, 0.45mtr.apart as directed and maintaining till well eastabilished by watering, weeding, stirring, replacing casualtiies etc. complete

Preparing Shrubbery :- Excavting the ground to required depth of 30 cms, removing and coveying unwanted stuff to a required depth as directed. Filling fresh garden soil and manure in excavted area 3:1 poroporation to a height of 30 cms. Mixing garden soil and manure thoroughly well developed shurbs plants, 0.50 mtr. height, 0.45mtr.apart as directed and maintaining till well eastabilished by watering, weeding, stirring, replacing casualtiies etc. complete

Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) R.C.C. work

Dismentling steel work including distempering and stacking the materials with all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar.

INR Zero Only