UT Administration Of Dadra And Nagar Haveli Tender

Supplying and erecting, testing and commissioning of Cross connector / Test Joint for Flat: Suitable upto 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate. Complete in all respect including all required for the same.

Supplying and erecting, testing and commissioning of flat conductor holder suitable for FL 30. Installed with 2 hexagonal bolts. Complete in all respect including all required for the same.

Supplying and erecting, testing and commissioning of 18w bracket LED Surface Mounted indoor Lights Fittings with High Efficency Diffuser equvivalent to Nebula Bracket KL4270, 18w LED Complete in all respect including all required for the same.

Supplying and erecting, testing and commissioning of ( Geared HVLS fan) Model : EAHVLS 6E Diameter : 20 Feet / 6 AERO BLADES / Speed 66 RPM Variable Speed / Air Flow 288,000 CFM / Sound 65 dB / Max. Power 1.5 KW, 3 Phase 415c V / Weight- 130 Kg/ VFD controller / German Make Gearmotor , High grade 6061 T6 Aluminum alloy used for Aerofoil blades With secondary Anti- Fall safety systems to structure with wire ropes; to blades & Hub in hub assembly for anti-fall, with suitable down rod Complete in all respect including all required for the same.

Supplying, installation, testing & commisioning of following capacity End Feed Unit for the sandwitch Type rising mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick steel sheet enclosure duly powder coated with provision of MCCB (but without MCCB) complete with necessary joints including clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required of 250A Complete in all respect including all required for the same.

Supplying and Laying of 70 sq mm Cu. PVC insulated FRLS flexible wire. Complete in all respect including all required for the same.

Supplying and Laying of 50 sq mm Cu. PVC insulated FRLS flexible wire. Complete in all respect including all required for the same.

Design, Fabrication, Supply, Installation, Protection, Cleaning & Handover of The new ES 200 Easy in the attractive DORMA design stands for simple automation of sliding door units in all areas of application. It is the innovative drive system for door units up to 2 x 85 kg, is of modular construction with world‐wide tried and trusted electronics and new mechanics comprising only a few components and can be used for both 100 and 150 mm height. The prefabricated mini drive unit is also impressive; it is tested industrially with all the necessary electrical and electronic components. Auto Sliding Door Top motor make by Dorma including Hardware's & accessories fitting frame door with 10mm thick fully tempered (FT) glass. Edges Machine ground mirror polished. With side fix glass fixed in Alum.frame. Providing and Fixing of Auto‐Sliding door With all required Hardware's and accessories (Automatic door with the size of 6.25 mtr where in you will get the clear opening of 3mtr. Panel sliding door )Design, Fabrication, Supply, Installation & Handover of cap curtain wall full glazing system designed mullion section 57x115, transom section 57x115, pressure plate section 53.50x10, cover cap section 56x18.30, connector 38x38, sleeve 38x38, adaptor section 25x19.With powder coating‐50 ‐70 micron. EPDM gaskets, weather sealants of GE /Dow Corning make, baker rod. Bracketing system with MS hot dip galvanized brackets designed to accommodate three dimensional movements with pvc packing shims, Anchor fastener, screw, washer nut & bolts. Including all necessary hardware & Labour etc. With 12mm Clear toughneed glass. For Block-B Entry Only. Complete in all respect including all required for the same.

Providing & Fixing M/F Suspended 12.5mm Plain Glasrock H Board which includes GI Perimeter Channel is fixed along the perimeter of existing wall/ partition with the help of screws at 600mm centres. GI Ceiling Angle is suspended at up to suitable height as per sight conditions by fixing it to the GI soffit clit with Soffit Cleat and  Rawl Plug creating 1220mm x 1220mm grid. GI Intermediate channel is fixed to the GI Ceiling Angle with 2 Nos of 4.2x13 GI metal to metal screw. The GI Ceiling Section is then fixed to the GI Intermediate Channel with the help of  Connecting Clip and in direction perpendicular to the Intermediate channel at 457mm c/c. All framing and grid section shall be GI (as per IS 513) having yeild strength 300 mpa and galvanized finish of 150 GSM as per IS 277. Single layer of 12.5mm tapered edge Plain Gypsum Board (Confirming to IS 2095-Part-I, 2011) is then screw fixed to ceiling section with 25mm drywall screws at 230mm centres. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Jointing Compound & Joint Paper tape. Rates shall be inclusive of cost of making cut outs/ openings for electrical fixtures, tube lights/ air-conditioners, grills, diffusers etc & providing additional sections for strengthening the openings/ cutouts. Area of cutouts shall not be deducted and no extra payment shall be considered for additional sections provided. Only plan area shall be considered for payment. Complete in all respect including all required for the same.

Providing & Fixing M/F Suspended 08mm Plain Calcium Silicate Board which includes GI Perimeter Channel is fixed along the perimeter of existing wall/ partition with the help of screws at 600mm centres. GI Ceiling Angle is suspended at up to suitable height as per sight conditions by fixing it to the GI soffit clit with Soffit Cleat and  Rawl Plug creating 1220mm x 1220mm grid. GI Intermediate channel is fixed to the GI Ceiling Angle with 2 Nos of 4.2x13 GI metal to metal screw. The GI Ceiling Section is then fixed to the GI Intermediate Channel with the help of  Connecting Clip and in direction perpendicular to the Intermediate channel at 457mm c/c. All framing and grid section shall be GI (as per IS 513) having yeild strength 300 mpa and galvanized finish of 150 GSM as per IS 277. Single layer of 12.5mm tapered edge Plain Gypsum Board (Confirming to IS 2095-Part-I, 2011) is then screw fixed to ceiling section with 25mm drywall screws at 230mm centres. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Jointing Compound & Joint Paper tape. Rates shall be inclusive of cost of making cut outs/ openings for electrical fixtures, tube lights/ air-conditioners, grills, diffusers etc & providing additional sections for strengthening the openings/ cutouts. Area of cutouts shall not be deducted and no extra payment shall be considered for additional sections provided. Only plan area shall be considered for payment. Complete in all respect including all required for the same.

Providing and applying plaster of paris of 10mm thickness over plastered surface to prepare the surface even and smooth complete. Complete in all respect including all required for the same.

Providing labour and machineries for polishing of kota stone work with upgradation from semi mirror polish to mirror polish including all necessary work for complete polishing at all floors any heights, any lead etc complete as directed by Engineer In charge. Complete in all respect including all required for the same.

Providing material and labour for fixing 12mm thickmarine plywood conforming to IS:710 of greenply, century make, plywood shall be fixed in aluminium frame with necessary cutting of sheet as per drawing & specifications including providing and fixing double strip magnet for trap door of local available make, screwing on the required surface of the sheet and as per the drawing & directed by Engineer in charge. All aluminium section shall be paid under relevant item. Complete in all respect including all required for the same.

Providing and fixing Polyethylene - Aluminium - Polyethylene (PE-AL-PE) composite pressure pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers, & connectors etc. with clamps at 1.00 meter spacing. This includes testing of joints complete as per direction of the Engieer-in-charge. Internal Work - Exposed on wall - 5063 (63mm OD) pipe Complete in all respect including all required for the same.

Providing material and labour for laying machined cut average 25mm thick River wash finish Brown Kotah stone of size upto 600mm of approved quality, color & texture, in circular ramp etc. of specified size as per design normal pattern (straight or staggered joint with square or rectangular and curvilinear pattern shaped stone) and as per drawings. Kota stone is to be laid over cement mortar 1:6 bedding of average 20 mm thickness and finishing including curing and cleaning with wire brush to remove excess cement on the sides of stone, chemphering of exposed edges up to the satisfaction of the Architect & engineer in charge etc. complete for all places/ all levels/ all heights. Sample and mockup shall be approvd procurement of material. Complete in all respect including all required for the same.

Providing and fixing Bamboo Scaffolding in OTS area of circular ramp up to 30mt height including making of working platform at top and maintain it in serviceable condition for execution of work. The working platform area of the scaffolding shall be measured for payment purpuse. The payment will be made once only for execuation of all items for such works. Complete in all respect including all required for the same.

Providing and fixing of 2 Hrs wooden Fire door from ISO 9001:2015 certified Manufacturer.Supply of 77mm thick Non-metallic,AsbestosFree Accoustic cum fire/smoke door of 120 minutes fire rating, conforming to BS: 476 part 22 IS: 3614 part -II , suitable to achieve apprrox. 32db, sound reducing properties suitable for fixing in wooden door frame of suitable section 140X90mm made out of Hardwood (Red Mirandi) and the shutter comprising of 2 non -combustible boards sandwiching 41 mm thick fire resistant & accoustic insulation filler. The shutter is faced with 6mm thick commercial ply and 1mm thick Laminate (Any Regular shade) on both faces and Hard wooden lipping all around the shutter. The frame shall be fitted with fire & smoke intumescent seal of size 20 x 4mm on all the three sides except bottom and shutter shall be fitted with fire & smoke intumescent seal of size 20 x 4mm on all the three sides except bottom. The shutter is fitted with the frame with help of SS 304 ball bearing hinges. The door shall have suitable arrangement only for the provision for Accoustic seals for sound reduction properties. Rate shall be inclusive of wooden frame, door shutter, laminates, all type of seals, SS 304 grade heavy duty hinges, necessary anchor fastner of hilti, fisher equvalent, SS 304 finish 450mm X 22mm D type Pull Handel, Mortise dead lock with both side key, 450mm long conceal type flush bolt, Conceal type door closers. For Main Door of Lecture Hall. Complete in all respect including all required for the same.

Supply & Installation of 08mm Thick Metal Roof Air Fill Bubble Type Insulation have Both Side Aluminum foil facing shall be directly fixed below the roof with help of GI wire and as per direction of engineer in charge. Complete in all respect including all required for the same.

Supply & Installation of Raised Access Floor System Having F Anti Static HPL (1mm Thickness) Laminated Steel Cementitious Panel :Size 600x600x35mm, Pedestal Assembly:Pipe 25mm Dia 2mm Thick of GI for Finish Floor Height 300mm, Pedestal Base Plate with 100x100x3mm will be MS Zinc Coated, Head Assembly : 75x75x3mm with 16mm Dia 80mm long Stud mechanically riveted to the Top Plate of Head, Stringer : GI Molded Stringers of Size 30 x 20 x 0.80mm thick 565mm Long with embossed ribs on 3 sides. (With 1 Nos. of Tile Puller). Complete in all respect including all required for the same.

Supply, Installation, testing, commissioning of UL listed, BTL approved IP BASED Open protocol INTEGRATOR with Inbuilt web browser & with max 150 device capacity, multiprotocol supported & should be of the same make as the DDC: INTEGRATION OF FOLLOWING SYSTEMS ON MODBUS-rtu / BACNET: The corresponding mentioned third party vendor shall be responsible to provide serial converter [RS 485 to RS 232] and the BMS vendor to accommodate the software address required for integration. including all necessary mounting hardware and accessories. as per technical specification etc. as required. software interface for CONDENSER PUMP & COOLING TOWERS Soft Data Integration on Modbus / Bacnet Over IP as per technical specification etc. as required. Complete in all respect including all required for the same.

Supply, Installation, testing, commissioning of UL listed, BTL approved IP BASED Open protocol INTEGRATOR with Inbuilt web browser & with max 150 device capacity, multiprotocol supported & should be of the same make as the DDC : INTEGRATION OF FOLLOWING SYSTEMS ON MODBUS-rtu / BACNET: The corresponding mentioned third party vendor shall be responsible to provide serial converter [RS 485 to RS 232] and the BMS vendor to accommodate the software address required for integration. including all necessary mounting hardware and accessories. as per technical specification etc. as required. software interface for OT AHU's (15 Nos) VFD Soft Data Integration on Modbus / Bacnet Over IP as per technical specification etc. as required. Complete in all respect including all required for the same.

Supplying, installation, testing and commissioning of IBMS Server Software suite: This Web technology based software suite shall have unlimited concurrent user login licences. The client license provided shall display actual graphics as represented in the server machine. Shall be capable of interfacing with Bacnet/IP based DDC controllers, Bacnet/IP or modbus RTU 3rd party interface. Complete with Webserver for IBMS interface on Internet / Intranet. License for minimum hard/soft I/Os to be considered as per I/O Summary. (1805 Points) (As per Approved Revised IO Summary) Software should have the following Key features: 1. User Defined dashboard. Any Number of dashboard can be added by user. 2. Scalar/Vector Graphics to be supported. 3. Monthly Calender Dashboard: Monitor the demand/ consumption pattern for all days in a a month in a single screen. 4. Software shall be able to communicate with bacnet/ lonworks/ modbus simultaneously. 5. Mobile Platform: IPAD/ Android Compatible. 6. Software shall be Forword & Backward Compatible with 10 Years Obselation Support from OEM. 7. Display of HTML 5 Pages fromm company intranet or Internet for full smart device compatibility - with NO Java Dependancy in the Browser. 8.Database supported by software should be either SQL/oracle/db2. Also software should support 128 bit ssl encryption. Note: All required Software with original license competent with BMS software Complete in all respect including all required for the same.

Supply, Installation, testing, commissioning of UL listed, BTL approved IP BASED Open protocol INTEGRATOR with Inbuilt web browser & with max 150 device capacity, multiprotocol supported & should be of the same make as the DDC: INTEGRATION OF FOLLOWING SYSTEMS ON MODBUS-rtu / BACNET: The corresponding mentioned third party vendor shall be responsible to provide serial converter [RS 485 to RS 232] and the BMS vendor to accommodate the software address required for integration. including all necessary mounting hardware and accessories. as per technical specification etc. as required. software interface for Fire Alarm System (1000 Points) Soft Data Integration on Bacnet Over IP. as per technical specification etc. as required. Complete in all respect including all required for the same.

Supply, Developing, Testing, Commissioning of IP based 32 bit dual core microprocessor, minimum 100 MB RAM & 60 MB flash memory, true peer to peer communication,DDC to support NTP synchronization,DDC should be modular & expandable in steps for future expansion requirements, DDC with 230 VAC +_ 10 % powered will be preferrable , DDC shall have inbuilt web browser and support XML, along with DDC Panel for Condenser Pump & Cooling Tower - as per IO Summary and as per technical specification etc. as required. Complete in all respect including all required for the same.

Supply, Developing, Testing, Commissioning of IP based 32 bit dual core microprocessor, minimum 100 MB RAM & 60 MB flash memory, true peer to peer communication,DDC to support NTP synchronization,DDC should be modular & expandable in steps for future expansion requirements, DDC with 230 VAC +_ 10 % powered will be preferrable , DDC shall have inbuilt web browser and support XML, along with DDC Panel for OT Air Handling Unit (Consider 2 OT AHU in 1 DDC) - as per IO Summary and as per technical specification etc. as required. Complete in all respect including all required for the same.

Supply, Developing, Testing, Commissioning of IP based 32 bit dual core microprocessor, minimum 100 MB RAM & 60 MB flash memory, true peer to peer communication,DDC to support NTP synchronization,DDC should be modular & expandable in steps for future expansion requirements, DDC with 230 VAC +_ 10 % powered will be preferrable , DDC shall have inbuilt web browser and support XML, along with DDC Panel for Sump Pump (Consider 2 Pump in 1 DDC) - as per IO Summary and as per technical specification etc. as required. Complete in all respect including all required for the same.

Supply, Installation, Testing, Commissioning of Water Type Differential Pressure Sensor Complete in all respect including all required for the same.

Supply, Installation, Testing, Commissioning of Water Type Water Flow switch Complete in all respect including all required for the same.

Supply, Installation, Testing, Commissioning of Level Switch for Cooling Tower (Max 1mtr. Depth ) Complete in all respect including all required for the same.

Supply, Installation, Testing, Commissioning of Room Type Co2 Monitoring for Fresh Air damper Modulation ( Measuring Range :- 0-2000 ppm Co2) Complete in all respect including all required for the same.

119.90 kWp Grid-Connected Solar PV System Turnkey project Includes: • Design, Supply, Installation & Commissioning, • Survey, Transportation, and Transit Insurance, • Net metering and Coordination with Discom Make:- OHMS ENERGY/CELESTIAL/SHREE VISHWAKARMA Approved by Architect Complete in all respect including all required for the same.

Secondary Chilled water Pumping System with VFD including Supply, Installation, Alignment, Testing and Commissioning of Horizontal Split Case Chilled Water Centrifugal Pumps with bronze impeller for chilled water recirculation complete with TEFC Sq. Cage induction motor with class "F" insulation, starter panel, Flexible coupling guard, vibration isolators, SS Shaft, base plate, factory fitted mechanical seal, flexible pipe connector at inlet and outlet etc. complete with suitable VFD for each pump including controller suitable for AC application, conforming to technical specification and as per design parameters listed here Under (3 working + 1 stand by) Pump Head 47m USGPM 2000 Efficiency # More Than 70% (inclusive of one standby) Complete in all respects of approved equivalent makes and specifications. Complete in all respect including all required for the same.

EXPANSION TANK 1500 LTS CAPACITY Supplying, installation, testing and commissioning of Precharged Steel Closed expansion tank as per specification with replaceable heavy duty butyl rubber bladder, mounting stand with all necessary system connection & charging valve connection to facilitate on site charging. Tank to meet ASME Boiler & pressure vessel code along with all necessary valves & fittings complete as per technical specifications, drawings and requirements. - 1500 Litres. With Pressurisation unit Complete in all respect including all required for the same.

Supplying and fixing of 19 thick Nitrile rubber insulation on duct after applying suitable adhesive with Glass Cloth. (for outdoor applications) Complete in all respect including all required for the same.

FIRE FIGHTING WORK Supply, Installation, Testing and Commissioning of Electric driven main fire pump (Hydrant & Sprinkler Pump) suitable for automatic operation and consisting of following: complete in all respect as required. a) Horizontal, centrifugal, end suction pump to ensure a minimum pressure of 3.5 kg / sq.cm. at highest and farthest outlet at specified flow of 2280 lpm at 120 m. head conforming to IS standards. b) Squirrel cage induction motor with suitable HP with synchronous speed 3000 RPM, Suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, Conforming to IS standards. c) Common Base plat for Pump and motor and coupling, coupling guard, vibration pad, cables and other accessories as required for complete Installation of pump set. Complete in all respect including all required for the same.

Supply, Installation, Testing and Commissioning of Diesel Engine Driven (Stand By) fire pump suitable for automatic operation and consisting of following: complete in all respect as required. a) Horizontal, centrifugal, back pullout pump to ensure a minimum pressure of 3.5 kg / cm². at highest and farthest outlet at specified flow of 2280 lpm at 120 m. head conforming to IS standards. b) Diesel engine of 2200 RPM water cooled type with radiator conforming to relevant BS & IS standard complete with auto starting mechanism, 12 volts/24 volts electric starting equipment, Diesel tank, exhaust pipe extended up to 1 m. outside pump house duly insulated with 50 mm. thick glass wool with 1.0 mm. thick aluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. vibration pad & other accessories as required for complete Installation of pump set. Complete in all respect including all required for the same.

INR Zero Only