UT Administration Of Dadra And Nagar Haveli Tender
View complete overview of Dadra & Nagar Haveli UT Administration Of Dadra And Nagar Haveli Tender
UT Administration Of Dadra And Nagar Haveli Tender
Eprocure
Opening Date13 Feb 2021
Closing Date27 Feb 2021
Tender AmountRefer Documents
Costs
EMD
₹ 19,63,348Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_UTDNH_5116_1Bid Award Id
ViewTender No
SSCL/DNH/E-TENDER/VEGETABLE MARKET/09/2020Tender Authority
UT Administration Of Dadra And Nagar Haveli ViewPurchaser Address
-Website
http://https://dnh.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Demolition of Brick work and stone masonry in foundation and concrete wall including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (ii) In Cement Mortar.
2500
-
-
Dismentaling tiled of stone floors laid in mortar ,Raised Floor (250mm) above sheet roofing inclusding ridges, hips,vaalyes ,gutters etc., including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.
8510
-
-
Dismentling barbed wire in fencing including making rolls and also including dismentling fencing posts including all earth work concrete in base and making good the disturbed ground stacking useful materials as directed and disposing as directed and disposing of the unserviceable materials with all lead and lift.
1000
-
-
Demolition and disposal of unserviceable materials with all lead and lift. (i) Lime concrete.
125
-
-
Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in-Demolition of MS Gates along Compound Wall.
500
-
-
COBBLE STONE: Providing and supply of Granite Cobble Stones of Size: 4”x4”x2 to 3” of color White Grey & Grey with all specifications.Providing and laying heavy duty cobble stones 60mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength of 281 kg per sqm over 50mm thick sand bed (average thickness) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of pavar surface joints into its final level, including cost of materials, labour and HOM of machineries complete as per specifications. The makes shall be like Kajaria, Cera, N Stones or equivalent.
5823
-
-
INDUSTRIAL FLOORING: Providing and Laying of Industrial flooring with all specifications. The makes shall be like Fosroc/ SICA or equivalent.
210
-
-
GATES: Providing and fixing of MS fabricated gates with all specifications including The gate shall consist of a steel skin plate supported by horizontal stiffening members connected to vertical side guiding and stiffening members contained within the grooves. Arrangements shall be provided for attaching the gate to the operating spindle by a non-ferrous hinge pin. The gate shall be fitted with machined non-ferrous sliding faces and approved rubber seals, as detailed on the Drawings, to achieve an effective watertight seal.
10
-
-
Design, manufacture,supply and installation of 50 mm thick glass fiber reinforced concrete elements produced in accordance with procedures reffered in pre cast institute (USA) Manual 128 EDN 4. Manufacturing using, alkali resistant glass fibres, high silica sand and white cement confirming to relevant indian and ASTM standards. The makes shall be like Unistone/Merino/Birla/Ultratech or equivalent.
260.1
-
-
Designing, Commissioning, testing, providing, fabricating, assembling and erection of composite roofing sheet made of woven hightenacity polyester yarn count of 1100 dtex, coated both sides with PVDF 900gsm lacquer with the front side provided with suitable primer, low-wick, protected against microbial and fungal attack, UV-protected. Roofing sheet would have weight of min 900 gram per square meter ((EN ISO 2286-2), with tensile strength of minimum 4000 newton per 50 millimeter in both warp and weft direction ((EN ISO 1421), and tear strength of minimum 500 Newton in both warp and weft direction DIN 53.363). The Roofing sheet must also be dimensionally stable with elongation of less than one percent (1%) in both warp and weft directions under static load of two Kilo Newton per meter (2KN/m) and also roofing sheet should have residual elongation of less than decimal four per cent (0.4%) in both warp and weft directions as per EN 15977 norms.This work aslo includes but not limited to, foundation in all type of soils to tensile roof structure with minimum concrete grade of M20 and reinforcement of grade Fe500, all design and specification for this foundation work shall be as per IS:456-2016. The makes shall be like Shade Manufacturer or equivalent.
2224
-
-
TREE GRATING: Supply and instalation of Oppo Cast Iron Tree Grate. The Oppo Tree Grates are perforated with flora motifs and available in 3 shapes: Circular|Square|Rectangular, Laser cut steel sheet galvanised and powder coated frames 40 x 30 x4mm galvanised L-Profile steel with brackets, Circular: Ø1200mm (with 400mm diameter Hole). The makes shall be like Chevron Inc or equivalent.
100
-
-
Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member size 92mm x 31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with 12 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc. The makes shall be like Hindalco/Jindal/SSAIL or equivalent.
480
-
-
Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter-locked together through their entire length and jointed together at the ends by end locks mounted on specially designed pipe shaft with bracket plates, guide channels and arragements for inside and outside locking with push-pull operation including the cost of hood cover and spring etc. complete.(A) Shutters having width below 3.5 M. The makes shall be like Shakti/Hormann/Gandhi Automation/Jayesh Automation or equivalent.
1080
-
-
Providing and fixing 1mm thick M.S. sheet sliding shutters with frame and diagonal braces of 40 x 40 x 6 mm angle iron, 3.15 mm M.S. gusset plates at Junctions and corners 25 mm dia. pulley, 40 x 40 x 6mm angle and T-iron huide rail at top and bottom respactively with handles, stoppers and locking agangement etc, including applying a priming coat of red lead paint. (upto 10 ton). The makes shall be like Shakti/Hormann/Gandhi Automation/Jayesh Automation or equivalent.
1260
-
-
Complete Concept analysis, design, Structure planning Membrane planning, Supplying, Providing, Fabricating, Assembling, hoisting, erecting and placing in position MS Built-up section/Tubular Structure plates confirming to IS 2062 Grade, ISI marked from TATA/JINDAL, conforming to IS 1161/4923, in the profile shape as per drawings with special plate connector, pinion joints, Plates, hollow sections etc using water jet 3-D cutting/plasma cutting system for obtaining smoot 3dimensional curvature, SAW/MMAW/MIG welding process with special plate connectors, pinion joints, plates, hollow sections with cleaning the surface and applying a coat of epoxy primer, and including preparation of detailed fabrication and erection drawings of Structural steel work from design drawings issued by Engineer-In-Charge and incorporation of Engineer-In-Charge's comments on same, transportation from fabrication yard, cutting, threading, machining, leads and lifts up to all heights, tools and plants and necessary scaffolding etc. required for all operations involved to make structure of Tensile Membrane shade. The tubular structure system with plate connectors, pinion joints, etc. is to be provided. The structure has to be provided as per conceptual drawings of Tensile fabric profile, including all arch beam, curved lateral beams and bracings, vertical support columns, nodal joints, ,bases of columns and high tensile bolts of grade not less than 10.9 having black phosphate coating. The complete structure to be painted with one coat epoxy primer , one coat of Epoxy Intermediate MIO and one coat of Polyurethane paint on steel work at all locations. Transportation and Crane charges are included. The makes shall be like IT Tensiles or equivalent.
450
-
-
Supply and installation of Signages with Acrylic with LED Back lit.Inside cover letter 1"Emboss LED waranty 1 year power supply 1 year waranty block coated wiring.including fabrication and installatio charges. The makes shall be like IN's and OUT/ A9 Display/ Aster Graphics.
45
-
-
Supply and installation of RECTRACTABLE BOLLARDS BGI K4 Crash Rated Bollards. Model : B3150 All price includes Engineering, Supply (including 15 mtr cables), Installation, Testing, Commissioning and necessary Technical & on the job training cost. The makes shall be like BGI K4 Crash rated bollards or equivalent.
46
-
-
Supply and providing of ZOTASVITO SS Street Waste Bin,Material: Stainless Steel,Grade: SS 304,Size: Height 4tf x Width 2.5ft,Capacity: 50 Litres,Finishing: Mat. The makes shall be like Chevron Inc or equivalent.
50
-
-
Supply and Installation of RFID Reader - (1 for Entry & 1 for Exit), and with one Controller with Software with 100 NO.S RFID TAGS with complete solution. The makes shall be like Elegant Enterprise or equivalent.
1
-
-
Seating Bench: Supply and Installation of Seating Bench.
Material: M.S
Seat Length: 2000mm,
Seat Height: 430mm,
Total Height: 792mm,
Depth: 520mm,
Finishing: Powder Coating. The makes shall be like Chevron. Inc. or equivalent.
30
-
-
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge.(Door handle, lock and stopper etc.to be paid separately). The makes shall be like Saint Gobain/ Pilkington or equivalent.
51
-
-
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).
86
-
-
Excavation in any soil upto 30 cm. depth, braking clods, removing unwanted stuff such as brick bats, stones, grass roots etc. refilling the same , preplanting watering , weeding .top - digging, relevelling and bringing the earth to fine tilth, ready for sowing or planting.
37.5
-
-
Labour for Spreading and mixing the manure evenly with top 8 to 10 cm of Prepared area at the rate of 5 cu.m per 100 sq.m area(Rate for 1 cu.m of manure).
37.5
-
-
Providing pure doob (Dharo) Grass Suckers and Planting the same at a distance of 8 to 10 cm.both ways and maintaining the same till well established (about 45 days).
100
-
-
PLANTING TREES AND SHRUBS : After excavating pits of the size 60 cm x 60 cm x 60 cm. refillings the same by providing and mixing Farm Yard Manure at the rate of 0.06 cu.m per pit , providing and planting well grown sapling of specified variety and maintaining till well established. Tree height 2.5 to 3 feet and Shrub height 1.5 to 2.0 feet. Bag size 8'x10' (about 45 days) complete.
195
-
-
Supply of the Labour for Maintenance of Garden Scope of work .(1) Cleaning of the Garden.(2) Removal of any Unwated Growth from the Lawn (3) Triming and Cutting of Excess Growth of any Tree in the Garden (4) Watering the Entire Garden including Lawn and Plantation.(5) Clean of Existing Structure in the garden.(6) Maintenance Up Keep of Play Area. Above mention all activity and other work as per instruction of the garden dept Director (AS PER GOVT RATE)-Maintenancce for 6.5 months.
195
-
-
Supplying of Trees- PLUMERIA ASSORTED VARITIES (Champa) of Bag size 18"x18"
10
-
-
Supply of Trees- QUSQUALIS INDICA (Madhumalti) of Bag size 7"x8"
35
-
-
Supply of Trees- WADELLIA of Bag size 7"x8"(Item No-332)
100
-
-
Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil- By manually
1008.19
-
-
Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and consolidating etc. complete. (upto 10 ton)
829.02
-
-
Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth (upto 10 ton) for total area of flooring,pcc on otlaa top,RCC cast in Situ (M-20) for Pedestal below Steel Column,For Pedestal below Steel Column,PCC, RCC cast in Situ (M-20) and PCC below Cobble Stone tc complete.
1363.27
-
-
Providing and casting in situ ordinary cement concrete M-200 for Kerbs/Kerb blocks including formwork, curing and finishing complete. (upto 10 ton)At edge of raised floor (0.45*0.15)
117.39
-
-
Providing and fixing in position H.Y.S.D. bar reinforement including cutting, bending and tying complete as per detailed drawings. (A) R.C.C. Kerb. (B) R.C.C. Footpath.(C) R.C.C. Approch slab.(D) Wearing Coat. (upto 10 ton)For Kerb stone-40kg/Cum of concrete. The makes shall be like SAIL/TATA/JINDAL/TISCON or equivalent.
4.7
-
-
Precast concrete block masonry (including quoin blocks jamb blocks closer etc.) with solid concrete blocks of approved size made of cement concrete 1:3:6 mix (1- Cement : 3 coarse sand: 6- graded stone aggregates of 20 mm and down grade) in foundation and plinth cement morter 1:6 (upto 10 ton) Otla Masonry Work.
92.92
-
-
Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarsesand) or L.M. 1.1.5 laid over and jointed with grey cement slurry including rubbing and polishing etc. complete. (B) 30 mm thick (upto 10 ton) Flooring with Paver Tiles on Otla.
294
-
-
Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of read lead paint. (A)In beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins connected to common rafters and the like (Up to 10 Ton)Steel Sections. The makes shall be like Shakti/ Hormann/ Ardor/ Navair/ AACESS or equivalent.
337.65
-
-
Providing and laying marble stone slab flooring over 20mm (average)base of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with gray cement slurry including rubbing and polishing complete. (A) Marble slab 25mm thick (upto 10 ton)Flooring with Paver Tiles on Otla.
611.28
-
-
Providing and fixing Bison panel cladding around steel otla as per indian standard codes and specifications or international standard as applicable Bison panel cladding around steel otla. The makes shall be like NCL Industries LTD/ Datta Enterprises, Jaipur or equivalent.
392.4
-
-
Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter-locked together through their entire length and jointed together at the ends by end locks mounted on specially designed pipe shaft with bracket plates, guide channels and arrangements for inside and outside locking with pushpull operation complete but excluding the cost of hood cover and spring. (A) Shutters having width below 3.5.M.Rolling shutter for otla. The makes shall be like Shakti/Hormann/Gandhi Automation/Jayesh Automation or equivalent.
196.2
-
-
Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level (upto 10 ton). The makes shall be like SAIL/ TATA/ JINDAL/ TISCON or equivalent.
36847.66
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. The makes shall be likeJindal/ SAIL/ Grade 304, from salem steel plant or equivalent.
1857.06
-
-
Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (C) Vertical surface such as walls (any thickness) partitions and the like including attached buttresses & string course & the like. (upto 10 ton)Formwork to pedestal and foundation.
260.4
-
-
Scarifying gravelled macadam or bitumen macadam surface 6 cm to 10 cm.depth including stacking useful materials on road side and disposing off remaining stuff.Scarifying existing bituman macadm for cobal stone flooring.
5823
-
-
Supply and installation of 12mm Multicellular polycarbonate sheet branded of Danpal with IR Coating to block the heat with 3 cells multicell daylighting system.Providing and Fixing of Multi cell Polycarbonate Panels 12mm thick with 3cells - 4 walls structure over MS Supporting structures with special IR Coating. Panel Width shall be 600 mm to ensure best performance for wind uplift. The panels shall be uniform in color with an integral Multi-Cell core. In a cross section, the core shall be constructed of Microcell of max 4.5mm x 4.5mm.The appearance should be either rectangular or honeycomb like. The weight of the panel onlyshall not be less than 2500 gram per square meter (only panel). Panels having Vertical StandingSeam 15mm at both sides; snap-on connector to interlock the panels shall have a grip-lock 2tooth locking mechanism to ensure maximum uplift capability. Panels shall be fixed on Purlins with special Expansion fastener, polycarbonate U/2 connectors.Panel shall have special LOW-Ecoating to block the heat. The LOW –E properties of the panels must be tested and compared toa similar panel without the LOW-E coating, by an independent recognized and accreditedlaboratory. The tests must show that the Tgh (transmittance spectra) is lower and the Rgh(reflectance spectra) is higher over the NIR wavelength on the LOW E coated panel compareto the non coated one. Panels shall be manufactured with approved quality assurance as per ISO 9001 & ISO 14001 and manufactures should have successful project reference having minimum 1500 sq mtr in Indian sub-continent at least for 10 years old. The panels should pass a Cyclonic test of an accredited laboratory in accordance with building codes like AS 4040:1992(Methods of testing sheet roof and wall cladding-resistance to wind pressures for cycloneregions) with a Grade "satisfied".The UV should block more than 99% of the UVA and UVBthrough a clear panel as tested by an independentrecognizedandaccredited laboratory as per AS/NZS 1067:2003. Translucent polycarbonate system Materials and Products shall be manufactured by a company continuously and regularly employed in the manufacture of translucent systems using polycarbonate panel systems for a period of at least twenty (20) years. Panel shall be fixed over structural steel / MS purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. The makes shall be like Danpal or equivalent.
228
-
-
Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil-Exected with Mechanical efforts/ machinaries.
966.1
-
-
Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered). Depth exceeding 1.5 m but not exceeding 3 m.
1235.78
-
-
Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering.
545.52
-
-
Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete. (upto 10 ton)
93.87
-
-
Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (B) Walls, Columns from top of foundation level upto floor two level (upto 10 ton)
28.68
-
-
Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (C) Slabs, landing, shelves, Balconies, Lintels, Beams, Girders and Cantilever upto floor two level. (upto 10 ton)
150.48
-
-
Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4M. and removal of the same for in situ reinforced concrete and plain concrete work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete. (upto 10 ton)
249.35
-
-
Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (G) Columns PillarsPosts and struts. (1) Square Rectangular Polygonal in plan. (upto 10 ton)
489.61
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.(The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.) The makes shall be like Dr. Fixit/ Sunanda or equivalent.
60.7
-
-
Providing formwork of ordinary timber planking so as to give a rough Finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4M. and removal of the same for in situ reinforced concrete and plain concrete work in. (B) Flat surfaces such as soffits of suspended floors slabs Landings and the like. (1) Floors etc. upto 200 mm in thickness. (Upto 10 ton) + Extra for Providing formwork with sheathing steel sheets so as to give a fair finish in (B)Flat surfaces such as soffits of slabs Landings and the like. 1) Floors etc. upto 200mm in thickness. (more than 10 ton)
415.24
-
-
Providing and laying damp proof course 25mm thick cement concrete 1:2:4 (1-Cement: 2 coarse sand : 4 stone aggregate 10 mm nominal size) and curing complete (more than 10 ton).
415.24
-
-
Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional (upto 10 ton). Bricks will be brought from Vadodara.
3.76
-
-
Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand). Extra over items 58 to 71 for plastering on ceilings and sofits of stairs upto floor two level instead of plastering on walls.
77.13
-
-
Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in foundation and plinth (A) Modular (upto 10 ton). Extra for half brick masonry in superstructure above plinth level upto floor two level. (A) Modular. Bricks will be brought from Vadodara.
75.69
-
-
20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.
525
-
-
P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for anti skid (upto 10 ton). The makes shall be like NITCO/ Kajaria/ Johnson or equivalent.
284.26
-
-
Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry (upto 10 ton). The makes shall be like NITCO/ Kajaria/ Johnson or equivalent.
318.32
-
-
Applying two coats of Birla (White cement based) or Asian (acrylic lapy-putty) or equivalent and two coats of primer of approved brand and manufacture including Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shadeincluding thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth. For ceiling etc complete. The makes shall be like Asian/Berger/ Dulux /Nerolac or equivalent.
492.37
-
-
Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete. The makes shall be like Apex Acrylic Emulsion or equivalent.
594.79
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). The makes shall be like Shakti/ Hormann/ Ardor/ Navair or equivalent.
53.1
-
-
Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered).Depth exceeding 1.5 m but not exceeding 3 m.
132.84
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). The makes shall be like Shakti/ Hormann/ Ardor/ Navair or equivalent.
25.65
-
-
Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in foundation and plinth (A) Modular (upto 10 ton). Extra for half brick masonry in superstructure above plinth level upto floor two level. (B) Conventional. Bricks will be brought from Vadodara.
75.69
-
-
Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (i)Cement mortar 1:3 (1-cement:3-sand).
209.12
-
-
Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand). Extra over items 58 to 71 for plastering on ceilings and sofits of stairs upto floor two level instead of plastering on walls.
225.84
-
-
Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth. For internal walls. The makes shall be like Asian/ Berger/ Dulux/ Nerolac or equivalent.
223.64
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. The makes shall be like Jindal/ SAIL/ Grade 304, from salem steel plant or equivalent.
5934.29
-
-
Providing and fixing Panels 12mm thick with 3cells - 4 walls structure over MS Supporting structures with special IR Coating. Panel Width shall be 600 mm to ensure best performance for wind uplift. The panels shall be uniform in color with an integral Multi-Cell core. In a cross section, the core shall be constructed of Microcell of max 4.5mm x 4.5mm.The appearance should be either rectangular or honeycomb like. The weight of the panel onlyshall not be less than 2500 gram per square meter (only panel). Panels having Vertical StandingSeam 15mm at both sides; snap-on connector to interlock the panels shall have a grip-lock 2tooth locking mechanism to ensure maximum uplift capability. Panels shall be fixed on Purlins with special Expansion fastener, polycarbonate U/2 connectors.Panel shall have special LOW-Ecoating to block the heat. The LOW –E properties of the panels must be tested and compared toa similar panel without the LOW-E coating, by an independent recognized and accreditedlaboratory. The tests must show that the Tgh (transmittance spectra) is lower and the Rgh(reflectance spectra) is higher over the NIR wavelength on the LOW E coated panel compareto the non coated one. Panels shall be manufactured with approved quality assurance as per ISO 9001 & ISO 14001 and manufactures should have successful project reference having minimum 1500 sq mtr in Indian sub-continent at least for 10 years old. The panels should pass aCyclonic test of an accredited laboratory in accordance with building codes like AS 4040:1992 (Methods of testing sheet roof and wall cladding-resistance to wind pressures for cycloneregions) with a Grade "satisfied".The UV should block more than 99% of the UVA and UVBthrough a clear panel as tested by an independentrecognizedandaccredited laboratory as per AS/NZS 1067:2003. Translucent polycarbonate system Materials and Products shall be manufactured by a company continuously and regularly employed in the manufacture of translucent systems using polycarbonate panel systems for a period of at least twenty (20) years. Panel shall be fixed over structural steel / MS purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. The makes shall be like Danpal or equivalent.
56.52
-
-
Providing formwork of ordinary timber planking so as to give a rough Finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4M. and removal of the same for in situ reinforced concrete and plain concrete work in. (H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders Bressumers and Lintels not exceeding 1 M. in Depth. (upto 10 ton).
739.38
-
-
Steel work, riveted in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of read lead paint. (A) In beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like. (upto 10 ton). The makes shall be like Jindal/ SAIL/ Grade 304, from salem steel plant or equivalent.
7.5
-
-
Painting for Staircase.
1
-
-
Providing and supplying ISI mark G. I. pipes with Couplings of following class and diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. (IS -1239). For 80 mm dia.heavy duty. The makes shall be like Jindal/ TATA/ APEX or equivalent.
500
-
-
Lowering, laying and jointing G. I. pipes with G. I. specials of following diameters in proper position, grade and alignment as directed by Engineer-in-charge including conveyance from stores to site of work, labour, giving hydraulic testing, etc. complete. For 80 mm dia.heavy duty.
500
-
-
Providing and supplying ISI mark CI D/F Sluice Valves as per IS:14846 (Latest Edition) of following class and diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. 80 mm Dia. PM-1 with hand wheel/cap operated (PD Type Short Body). The makes shall be like VAG Valves, Hyderabad/ R&D Multiples Pvt. Ltd. Valsad or equivalent.
2
-
-
Providing and supplying ISI mark CI D/F Sluice Valves as per IS:14846 (Latest Edition) of following class and diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. 50 mm Dia. -For Scour Valve. PM-1 with hand wheel/cap operated (PD Type Short Body). The makes shall be like VAG Valves, Hyderabad/ R&D Multiples Pvt. Ltd. Valsad or equivalent.
1
-
-
Lowering, laying and jointing in position following C. I. / D/F Reflux valves, Butterfly valves, Sluice valves and Air valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. 80 mm Dia.
2
-
-
Lowering, laying and jointing in position following C. I. / D/F Reflux valves, Butterfly valves, Sluice valves and Air valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. 50 mm Dia. -For Scour Valve.
1
-
-
Excavation for pipe line trenches for water supply, sewerage line, manhole etc. all with shoring and struting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for all lifts and strata as specified. In all sorts of soil and soft murum.
96.06
-
-
Excavation for pipe line trenches for water supply, sewerage line, manhole etc. all with shoring and struting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for all lifts and strata as specified.In soft rock and/or masonry in CM or L M or Lime Concrete.
96.06
-
-
Excavation for pipe line trenches for water supply, sewerage line, manhole etc. all with shoring and struting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for all lifts and strata as specified. In hard rock and / or in C. C. 1:2:4 or RCC with blasting, breaking, chiseling, or by chiseling/breaking only.
101.68
-
-
Providing Bedding including ramming, watering , levelling consolidating etc. complete as per standards and instruction of Engineer -in charge - As above with Murrum brought from outside including all lead.
51
-
-
Refilling the pipeline trenches incl. ramming, watering, consolidating desposal of surplus stuff as directed within a radius of 3 km. 50% of Refilling from Available Stuff.
128.33
-
-
Refilling the pipeline trenches incl. ramming, watering, consolidating desposal of surplus stuff as directed within a radius of 3 km. 50% of Refilling from Available Stuff.
449.8
-
-
Construction of valves chambers in brick or bela stone masonry, locally available in C. M. 1:6. Foundation concrete 150 mm thick in C. C. 1:4:8 of trap metal size 25 mm to 40 mm thick, inside cement plaster in C. M. 1:3 and cement pointing outside in C. M. 1:3 and top cover of precast RCC slab 100 mm thick (with key hole in two parts, each with handles or MS Bar etc. complete as given size) Upto 1 Mt. depth from G. L. to pipe invert level incl. complete civil works but excl. cost of excavation and refilling, with cast in situ RCC slab in one single piece with fixing of CI-MH Frame and cover (excl. cost of CI-MH Frame and cover) with 23 mm thick brick masonry wall in C.M.1:6 Size of chamber 0.60 m x 0.60 m and 1.0 mt. deep With precast slab in two parts 15 mm.
2
-
-
Providing and casting in situ C.C. in grade M-15 (approx. corresp. to prop. 1:2:4) (proportions as per mix design or as per Table 9 of IS456 2000 in masses by weigh batching ) using granite, quartzite trap metal of size 6 mm to 20 mm for RCC work, including scaffolding centering, form work, needle vibrated consolidation, curing comp. up to 6 meter depth or height (excluding cost of reinforcement and neat finishing) with centering and shuttering/deshuttering etc. comp. for structure for other than water retaining. CC Nominal Mix- With Form Work.
11.56
-
-
Re-instatement of Asphalt Roads including clearing and grubbing road, earth work and erosion control work, providing, laying, spreading, compacting granular sub base and base coarse (Non Bituminous and Bituminous), providing and applying Bitumin concrete and surface coat, tack coat as directed by engineer in charge.
381.1
-
-
Excavation for pipe line trenches for water supply, sewerage line ,manhole etc.,all with shoring strutting if required , as per required gradient and line including safety provisionsusing site rails and stacking the execavated stuff including up to all required lead , cleaning the site etc., complete for all lifts and strata specified.-in hard murum , boulder incuding macadam road.
172.39
-
-
Providing and fixing of Metalic Stainer - Y type, Brass / Gun metal body, suitable for proposed Connection. The makes shall be like Zolto Industries/ Rotex Manufacturers/ Durga Valves or equivalent.
10
-
-
Providing and fixing Compression Female Threaded sevice saddle of HDPE confirming to IS 8008 & IS 10299-1982 which consist of two straps which envelopesom where a connection is given including drilling hole in pipe, neopreme ruber ring two half round moulded HDPE section with boss Conforming to relevant IS specification , manufactured from high density black Polypropylene with approval from ispecting as specified by department etc. for usage in drinking water system and having working pressure rating 10 Bar. The cost shall include cost and testing of all materials,jointing materials,like nuts, bolts,rubber packing and giving hydraulic test, labour, all taxes (Central, State and Municipal), inspection charges, transportation up to site, transit insurance, loading, unloading, stacking, providing and fixing etc complete in all respect and as directed by Engineer In-Charge.
For 20 mm branch female threaded. The makes shall be like Zolto Industries/ Rotex Manufacturers/ Durga Valves or equivalent.
10
-
-
Providing, Supplying, and Fixing Two Elbows of GI & 1 Union. The makes shall be like Zolto Industries/ Rotex Manufacturers/ Durga Valves or equivalent.
30
-
-
Providing, Supplying, and Fixing CI Stop Cock including 1 nipple & Coupler , all taxes, insurance, transportation, frieght charges, octroi, inspection chrges, loading, unloading, conveyance to departmental stores, stacking etc. complete. 20 mm dia CI stop Cock as per IS:1711. The makes shall be like Zolto Industries/ Rotex Manufacturers/ Durga Valves or equivalent.
10
-
-
Providing and supplying ISI mark G. I. pipes with Couplings of following class and diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. (IS -1239) (Not for well/tube well column pipe) Heavy Duty 20 mm. The makes shall be like Zolto Industries/ Rotex Manufacturers/ Durga Valves or equivalent.
130
-
-
Lowering, laying and jointing G. I. pipes with G. I. specials of following diameters in proper position, grade and alignment as directed by Engineer-in-charge including conveyance from stores to site of work, labour, giving hydraulic testing, etc. complete.
130
-
-
Providing and fixing gun metal ferrule of ISI quality including all taxes etc complete. 20 mm Gun metal ferrul (Appropriate size).
10
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:-a)White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap.
21
-
-
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fitting.
21
-
-
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms.
21
-
-
Providing and fixing PTMT Bottle Trap for Wash basin and sink.-Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms.
21
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931-15 mm nominal bore.
21
-
-
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
12
-
-
Providing and fixing toilet paper holder-a) C.P brass.
18
-
-
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
9
-
-
Providing and fixing mirror of superior glass (of approved quality) and of require shapoe & size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing-a)Rectangular shape 453x357 mm.
6
-
-
Providing and fixing mirror of superior glass (of approved quality) and of require shapoe & size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing-b)Rectangular shape 1500x450 mm.
6
-
-
INTERNAL DRAINAGE (BUILDING)-Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:- a) 100x100 mm size P type-With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. The makes shall be like Bengal Iron/ Astro Polytechnical/ Bombay Iron Works or equivalent.
12
-
-
ROOF RAIN WATER DESIGN- Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges, making and finishing the outlet complete.
3
-
-
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. The makes shall be like Kirloskar Brothers/ Welspun Corporation or equivalent.
3
-
-
Providing and fixing 100 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 fine sand).-a)Stone ware spout. Makes of: Kirloskar Brothers/ Welspun Corporation or equivalent.
3
-
-
WATER-SUPPLY (BUILDING)-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc. NOTE: The pipe of sizes 50mm & below shall be of SDR-11 Class and pipe of sizes 65mm & above shall be of Sch-40-a)15 mm nominal outer dia. Pipes. The makes shall be like Supreme/ Finolex or equivalent.
153.6
-
-
WATER-SUPPLY (BUILDING)- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc. NOTE: The pipe of sizes 50mm & below shall be of SDR-11 Class and pipe of sizes 65mm & above shall be of Sch-40b)20 mm nominal outer dia.Pipes. The makes shall be like Supreme/ Finolex or equivalent.
76.2
-
-
WATER-SUPPLY (BUILDING)- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc. NOTE: The pipe of sizes 50mm & below shall be of SDR-11 Class and pipe of sizes 65mm & above shall be of Sch-40c)25 mm nominal outer dia. Pipes.
12
-
-
WATER-SUPPLY (BUILDING)- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc. NOTE: The pipe of sizes 50mm & below shall be of SDR-11 Class and pipe of sizes 65mm & above shall be of Sch-40d) 32 mm nominal outer dia. Pipes.
63
-
-
WATER-SUPPLY (BUILDING)- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc. NOTE: The pipe of sizes 50mm & below shall be of SDR-11 Class and pipe of sizes 65mm & above shall be of Sch-40e) 40 mm nominal outer dia.Pipes. The makes shall be like Supreme/ Finolex or equivalent.
18
-
-
WATER-SUPPLY (BUILDING)- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc. NOTE: The pipe of sizes 50mm & below shall be of SDR-11 Class and pipe of sizes 65mm & above shall be of Sch-40f) 50 mm nominal outer dia.Pipes. The makes shall be like Supreme/ Finolex or equivalent.
18
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.(for terrace ring main)External worka)50 mm nominal outer dia.Pipes. The makes shall be like Jindal/ TATA/ APEX or equivalent.
16.5
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.(for rising main from UGT to terrace)-External worka)32 mm nominal outer dia.Pipes. The makes shall be like Jindal/ TATA/ APEX or equivalent.
21
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.(for rising main from UGT to terrace)-External workb)40 mm nominal outer dia.Pipes. The makes shall be like Jindal/ TATA/ APEX or equivalent.
320
-
-
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :a)32 mm nominal outer dia.Pipes.
21
-
-
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :b)40 mm nominal outer dia.Pipes.
320
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats completea)20 mm nominal bore. The makes shall be like Kirloskar Brothers/ Welspun Corporation or equivalent.
6
-
-
SANITARY FIXTURE AND CP FITTINGS- Providing and fixing straight /offset type single body push fit type WC pan connector with factory supplied spring loaded seal guard with integral single mould sealing fins made of flexible EVA body, including bush/adaptor for use with C.I. Pipe as supplied with the pan connector complete in all respect. The makes shall be like Viega or equivalent.
27
-
-
Providing & fixing Physically handicap toilet set with European Closet (P Trap) & wall mount wash basin & all divyang requirements with dual flush tank, seat & lead (heavy duty) including C.I. Brackets, C.P. brass hinges, M.S. / C.I. painted brackets, 32mm CP waste Coupling, 32mm size CP bottle trap, CP brass Spatula Faucet, etc. all Internal fittings complete with one no Hinged rail, 4 numbers of S.S grab rails etc. rubber buffers, C.P nuts, bolts etc making holes in walls & floors, & finishing for ready to use.The rate includes all necessary connection charges as per product detail to the satisfaction and as directed by the Engineer. .All materials specified above shall form part of the Divyang toilet set and shall be from Divyang range of approved make.(Hindware code no70002 or approved equivalent). The makes shall be like Hindware or equivalent.
6
-
-
Providing and fixing wall mounted 2 Way bib cock with wall flange and flexible hose pipe with wall hook.(Kohler 16094IN-4-CP or approved equivalent and Kohler 12927in-cp or approved equivalent ) complete in all respect. a)15 mm nominal bore. The makes shall be like Kohler/ Jaguar or equivalent.
33
-
-
Providing and fixing S.S. Double coat hook(Kohler 15247in-cp or approved equivalent ) of approved make, fixed to PVC cleats with C.P. brass screws etc.all complete as per directions of the Engineer. The makes shall be like Jaguar or equivalent.
33
-
-
Supplying, Installing & testing 15 mm CP bib cock(Jaguar FLR-CHR-5047N or approved equivalent ) with CP flanges including necessary fixing materials etc., complete. (for Cleaning areas). The makes shall be like Jaguar or equivalent.
6
-
-
Providing and Fixing SS Towel Ring (Kohler 5631in-cp or approved equivalent ) of approved make and quality, and as approved by the Engineer, including all necessary materials required for fixing. All complete as per directions of the Engineer.
21
-
-
Providing and Fixing Chrome plated brass Liquid Soap Dispenser(Jaguar ACN-CHR-1137N or approved equivalent ) of approved make and quality, and as approved by the Engineer, including all necessary materials required for fixing. All complete as per directions of the Engineer. The makes shall be like Jaguar/ Kohler or equivalent.
21
-
-
Supplying, Installing, testing hand dryer machine. (Jaguar HDR-SAP-M99ACS or approved equivalent )etc all complete. The makes shall be like Jaguar or equivalent.
9
-
-
Supplying, Installing, and fixing hand paper dispensor (Jaguar PTD-SAP-DT0106CS or approved equivalent )etc all complete. The makes shall be like Jaguar or equivalent.
9
-
-
INTERNAL DRAINAGE (BUILDING)- Supplying, fixing and testing uPVC pressure pipes (6 Kg/sq cm) confirming to IS 4985 for waste connection from wash basins to floor trap / anti syphonage pipe with solvent cement joints, including all the fittings, laid above false ceiling concealed in wall etc, the work shall include wall chase and making good the same in cement mortar etc., complete. The quoted rate should include necessary supports like hanger supports, grip bolts and clamps etc., in false ceiling area as well as supplying and fixing MS slotted angle iron brackets, hangers, supports with necessary drilling holes to suit the insertion of pipe clamps, deburring etc., as per detailed drawing for supporting soil, waste and rain water pipes and water supply pipes in shafts with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls outer walls etc. The quoted rate shall include the cost of brackets galvanized with zinc alloy of 0.08 mm thick conforming to IS 1239 etc., complete.a) 40 mm dia ID. The makes shall be like Heena Agency or equivalent.
54
-
-
U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe. 110 mm dia. The makes shall be like Supreme/ Finolex/ Ashirwad or equivalent.
12
-
-
Supplying, fixing and testing uPVC soil, waste and ventpipes (SWR) confirming to IS 13592 :1990 & IS 14735 typeB with rubber ring (confirming IS:5382) joint inclusive of all necessary specials like bends, tees,wye's, offsets, doorbends, junctions, etc., laid under floor / fixed on walls, hung under the ceiling, and in pipe shafts etc., complete. The quoted rate should include lead and lifting charges to all levels, necessary scaffolding and supports like hanger supports, grip bolts and clamps and making good the openings etc. The rate should include supplying and fixing MS slotted angle iron brackets, hangers, supports with necessary drilling holes to suit the insertion of pipe clamps, deburring etc., as per detailed drawing for supporting soil, waste and rain water pipes and water supply pipes in shafts with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls outer walls etc. The quoted rate shall include the cost of brackets galvanized with zinc alloy of 0.08 mm thick conforming to IS 1239 etc., complete.(Soil and waste pipe)a)-75mm Diameter. The makes shall be like Supreme/ Finolex/ Ashirwad or equivalent.
162
-
-
Supplying, fixing and testing uPVC soil, waste and ventpipes (SWR) confirming to IS 13592 :1990 & IS 14735 typeB with rubber ring (confirming IS:5382) joint inclusive of all necessary specials like bends, tees,wye's, offsets, doorbends, junctions, etc., laid under floor / fixed on walls, hung under the ceiling, and in pipe shafts etc., complete. The quoted rate should include lead and lifting charges to all levels, necessary scaffolding and supports like hanger supports, grip bolts and clamps and making good the openings etc. The rate should include supplying and fixing MS slotted angle iron brackets, hangers, supports with necessary drilling holes to suit the insertion of pipe clamps, deburring etc., as per detailed drawing for supporting soil, waste and rain water pipes and water supply pipes in shafts with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls outer walls etc. The quoted rate shall include the cost of brackets galvanized with zinc alloy of 0.08 mm thick conforming to IS 1239 etc., complete.(Soil and waste pipe)a)-)110 mm Diameter. The makes shall be like Heena Agencies or equivalent.
81
-
-
Providing and fixing trap of self-cleansing PVC SWR P- Trap as per IS 14735 for Drain -110x110. The makes shall be like Heena Agencies or equivalent.
9
-
-
Supplying, fixing and testing uPVC floor trap (heavy duty hinged type) with brass CP frame & cover (150mm x 150mm). Trap of 100 mm dia. Inlet and 75 mm dia outlet with a seal of at least 23 mm for waste from wash basins and shower fixed on a bed of cement concrete etc.
33
-
-
ROOF RAIN WATER DESIGN- Supplying, fixing and testing HDPE as per IS 14333; PE 80 PN 12.5 rain water pipes with all fittings like shoes, bends fixed in the pipe shafts (ducts) with suitable supports / hitech supports etc., complete. (Vertical down takes) -a)110 mm diameter.
12
-
-
WATER-SUPPLY (BUILDING)- Supplying, installing and testing approved make GM ball valves conforming to IS 1703 with necessary unions etc., complete.a)50 mm dia (Screwed ends). The makes shall be like Zoloto Industries or equivalent.
2
-
-
Supply following size GM Solinoid valve with necessory cabling arrangement. The rate inclusive of supply of valves, Panel with necessory cabling, level control etc complete a)40mm. The makes shall be like J&J Corp or equivalent.
3
-
-
Supply following size GM Solinoid valve with necessory cabling arrangement. The rate inclusive of supply of valves, Panel with necessory cabling, level control etc complete-b)50mm. The makes shall be like J&J Corp or equivalent.
3
-
-
Providing & fixing Auto Air vent for cold water supply risers, suitable for pressure not less than 15 Kg/Sq.cm.a) 15 mm dia. The makes shall be like Zoloto Industries or equivalent.
3
-
-
50mm dia tanks vent connection with stain less steel mosquito proof mesh of approved quality sandwiched between flanges with necessary welding and bolts, washers and gasket etc. as per the approval of the engineer. The makes shall be like J&J Corp or equivalent.
12
-
-
Supply, installation, testing and commissioning of 750mm dia CI manhole cover of light duty, with necessary hinge, lever and necessary frame etc. as per the approval of engineer.(OHT). The makes shall be like J&J Corp or equivalent.
3
-
-
Providing and fixing truck fill point consisting of 150 mm dia water filling point having 150 mm dia brass plug (Truck fill point shall be housed in suitable lockable chamber).
1
-
-
PUMPS- Submersible Domestic water pumpsetSupply, Installation, testing and commissioning of Vertcal in Line pumps alongwith control panel with 3phase 440 volt/50cycles per second with water cooled motor, including all piping, valves, fasteners, flanges, gaskets, drain valves etc and other accesories as per detailed specifications including all taxes, transportation & insurance. The pump shall be suitable for automatic operation with cyclic lead-lag operational provision for even wear & tear of all pumps. The pump shall be automatically start & stop via control panel including dry run protection.Flow rate 5Cum/hr @35 head (1W+1S). The makes shall be like CRI Pumps or equivalent.
1
-
-
PUMPS-Submersible Domestic water pumpsetSupply, Installation, testing and commissioning of Vertcal in Line pumps alongwith control panel with 3phase 440 volt/50cycles per second with water cooled motor, including all piping, valves, fasteners, flanges, gaskets, drain valves etc and other accesories as per detailed specifications including all taxes, transportation & insurance. The pump shall be suitable for automatic operation with cyclic lead-lag operational provision for even wear & tear of all pumps. The pump shall be automatically start & stop via control panel including dry run protection. Piping -a) 65 NB (GI). The makes shall be like CRI Pumps or equivalent.
4.5
-
-
PUMPS- Submersible Domestic water pumpsetSupply, Installation, testing and commissioning of Vertcal in Line pumps alongwith control panel with 3phase 440 volt/50cycles per second with water cooled motor, including all piping, valves, fasteners, flanges, gaskets, drain valves etc and other accesories as per detailed specifications including all taxes, transportation & insurance. The pump shall be suitable for automatic operation with cyclic lead-lag operational provision for even wear & tear of all pumps. The pump shall be automatically start & stop via control panel including dry run protection. Piping -b) 50 NB (GI). The makes shall be like CRI Pumps or equivalent.
4.5
-
-
PUMPS- Submersible Domestic water pumpsetSupply, Installation, testing and commissioning of Vertcal in Line pumps alongwith control panel with 3phase 440 volt/50cycles per second with water cooled motor, including all piping, valves, fasteners, flanges, gaskets, drain valves etc and other accesories as per detailed specifications including all taxes, transportation & insurance. The pump shall be suitable for automatic operation with cyclic lead-lag operational provision for even wear & tear of all pumps. The pump shall be automatically start & stop via control panel including dry run protection. Manually operated sluice valve -a) 80 NB. The makes shall be like Zoloto Industries or CRI Pumps or equivalent.
2
-
-
PUMPS- Submersible Domestic water pumpsetSupply, Installation, testing and commissioning of Vertcal in Line pumps alongwith control panel with 3phase 440 volt/50cycles per second with water cooled motor, including all piping, valves, fasteners, flanges, gaskets, drain valves etc and other accesories as per detailed specifications including all taxes, transportation & insurance. The pump shall be suitable for automatic operation with cyclic lead-lag operational provision for even wear & tear of all pumps. The pump shall be automatically start & stop via control panel including dry run protection. Manually operated sluice valve b) 50 NB. The makes shall be like Zoloto Industries or equivalent.
2
-
-
PUMPS- Submersible Domestic water pumpsetSupply, Installation, testing and commissioning of Vertcal in Line pumps alongwith control panel with 3phase 440 volt/50cycles per second with water cooled motor, including all piping, valves, fasteners, flanges, gaskets, drain valves etc and other accesories as per detailed specifications including all taxes, transportation & insurance. The pump shall be suitable for automatic operation with cyclic lead-lag operational provision for even wear & tear of all pumps. The pump shall be automatically start & stop via control panel including dry run protection. Manually operated Butterfly Valve. a) 80 NB. The makes shall be like J&J Zoloto Industries or equivalent.
2
-
-
PUMPS- Submersible Domestic water pumpsetSupply, Installation, testing and commissioning of Vertcal in Line pumps alongwith control panel with 3phase 440 volt/50cycles per second with water cooled motor, including all piping, valves, fasteners, flanges, gaskets, drain valves etc and other accesories as per detailed specifications including all taxes, transportation & insurance. The pump shall be suitable for automatic operation with cyclic lead-lag operational provision for even wear & tear of all pumps. The pump shall be automatically start & stop via control panel including dry run protection. Non Return Valvea) 80 NB. The makes shall be like Zoloto Industries or its equivalent.
2
-
-
PUMPS- Submersible Domestic water pumpsetSupply, Installation, testing and commissioning of Vertcal in Line pumps alongwith control panel with 3phase 440 volt/50cycles per second with water cooled motor, including all piping, valves, fasteners, flanges, gaskets, drain valves etc and other accesories as per detailed specifications including all taxes, transportation & insurance. The pump shall be suitable for automatic operation with cyclic lead-lag operational provision for even wear & tear of all pumps. The pump shall be automatically start & stop via control panel including dry run protection. Strainera) 80 NB. The makes shall be like Zoloto Industries or equivalent.
2
-
-
PUMPS- Submersible Domestic water pumpsetSupply, Installation, testing and commissioning of Vertcal in Line pumps alongwith control panel with 3phase 440 volt/50cycles per second with water cooled motor, including all piping, valves, fasteners, flanges, gaskets, drain valves etc and other accesories as per detailed specifications including all taxes, transportation & insurance. The pump shall be suitable for automatic operation with cyclic lead-lag operational provision for even wear & tear of all pumps. The pump shall be automatically start & stop via control panel including dry run protection. Pressure Gauges on discharge line of each raw water pump. The makes shall be like CRI Pumps or equivalent.
2
-
-
Capacitance Type Electronic level Indicator for Fire water tank, Raw Water & Treated Water Tanks each consisting of level sensor, cable and panel mounted level indicator. (For underground tank). Makes of: J&J Corp or equivalent.
1
-
-
Pedestal wall mounted local weather proof cabinets for housing the level controller and electronic unit of level indicator. The makes shall be like J&J Corp or equivalent.
1
-
-
Supply, installation, testing and commissioning of 750mm dia CI manhole cover of Heavy duty, with necessary hinge, lever and necessary frame etc. as per the approval of engineer. The makes shall be like J&J Corp or equivalent.
1
-
-
Supply, installation testing and commissioning of G.I.pipe inserts with puddle flange for inlets, outlets, overflows, wash outs for OHT/utility as per standard details shown in drawings including complete with supports, hangers, painting etc as per specifications.a)50 mm. The makes shall be like J&J Corp or equivalent.
6
-
-
Supply, installation testing and commissioning of G.I.pipe inserts with puddle flange for inlets, outlets, overflows, wash outs for OHT/utility as per standard details shown in drawings including complete with supports, hangers, painting etc as per specifications.b)65 mm. The makes shall be like J&J Corp or equivalent.
3
-
-
Supply, installation testing and commissioning of G.I.pipe inserts with puddle flange for inlets, outlets, overflows, wash outs for OHT/utility as per standard details shown in drawings including complete with supports, hangers, painting etc as per specifications.c)80 mm. The makes shall be like J&J Corp or equivalent.
4
-
-
Supply, installation testing drain valves of following dia. with necessary pipe spool, fittings etc.a)50 NB. The makes shall be like J&J Corp or equivalent.
4
-
-
Supply and installation of polypropylene foot rest with M.S reinfocement / C.I. rungs as per approval of engineer. The makes shall be like J&J Corp or equivalent.
45
-
-
MS grating and frame (heavyduty, Grade A conforming to IS : 2062, fixed in cement concrete 1:2:4 (1 cement : 2 coarses and :4 graded stone aggregate 20mm nominal size) including centering & shuttering all complete.Note: Civil work required for channel drain shall be carried out by civil contractor as per the approved dwg / detail.a)300 mm x 450 mm. The makes shall be like J&J Corp or equivalent.
6
-
-
Supply installation and testing of water level controller consisting of 1 controller with option of selector switch for working and stand by pump with indicators for OHT and UGWT levels. The OHT level switch will comprise of 1 set of High / Low probe per OHWT.and URT. The makes shall be like J&J Corp or equivalent.
4
-
-
Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep orfor single pipe line. (upto 10 ton)
14
-
-
Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(iii) Inside dimensions 600mm x 610 mm and 450mm deep (or as per the site requirement) for pipe lines with three or more inlets. (upto 10 ton)-For Toilet and washing places.
6
-
-
Providing and supplying in standard length ISI mark rigid unplasticised PVC pipes suitable for potable water with ring fit joint including cost of rings, as per IS specification no. 4985/1988 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores and including cost of jointing material etc. complete.1.One coupler / ring shall be provided with each full length pipe cost of which is included in rates below.2.3% (Three) Discounted rate to be consider for Coupler jointed pipe3. Rate for PVC Resin as Rs. 85081.24 (inclu. of 18% GST, freight & Sales Tax) Dtd. 20-3-2019.Test Pressure 6 Kg/cm2.With Excise Duty-110 mm Dia.With 15% of cost of Specials. The makes shall be like Supreme/ Finolex/ Ashirwad or equivalent.
38
-
-
Providing and supplying in standard length ISI mark rigid unplasticised PVC pipes suitable for potable water with ring fit joint including cost of rings, as per IS specification no. 4985/1988 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores and including cost of jointing material etc. complete.1.One coupler / ring shall be provided with each full length pipe cost of which is included in rates below.2.3% (Three) Discounted rate to be consider for Coupler jointed pipe3. Rate for PVC Resin as Rs. 85081.24 (inclu. of 18% GST, freight & Sales Tax) Dtd. 20-3-2019.Test Pressure 6 Kg/cm2.With Excise Duty-160 mm dia, With specials at 15% cost. The makes shall be like Supreme/ Finolex/ Ashirwad or its equivalent.
36
-
-
Shoring or timbering for trench with 50 mm thick planks and suitable size truts etc., complete..
10
-
-
Hole Driller-Drilling of holes in 350 mm thick in a RCC/ BBM wallS, Main SWD Inlets ( 150 mm dia)
30
-
-
Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil
218.45
-
-
Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(D) Soft rock not requiring Blasting.
93.62
-
-
Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for culverts including setting and joining the pipes in C.M. 1:2 watering and laying (to level or slope) of I.S. class NP2 of following internal diameters.(i) 300mm dia. (more than 10 ton)
365
-
-
Manufacture, supply and delivery of Chemical fabricated RCC Precast chambers with top cover as per specification and drawing attached with the tender documents for sizes as mentioned below. The delivery of chambers with clamps, nuts, bolts and locking arrangement (without lock) is to be made to GWSSB store or sites any where in Gujarat. The rates includes all taxes, loading, carting, unloading, stacking, including octroi etc. complete. Rate based on Wholesale Price Index of cement product as 127.3 for the Month of January 2013, 60 x 60x 90 cm deep (Suitable to 80 to 300 mm dia pipe) 60 x 60 x 90 cm deep (Suitable to 80 to 300 mm dia pipes).
15
-
-
Providing of Foot rest for above chambers.
15
-
-
Erecting precast chamber-Labour charges for erecting precast RCC chamber for water main including carting from store, fixing etc complete (excluding execavationand refilling), 60 x 60x 90 cm deep (Suitable to 80 to 300 mm dia pipe).
15
-
-
RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at store or at site of work precast RCC M.200 Frame & cover suitable to drainage M.H. and as per type design & Drawing including cost of reinforcement M.S. Angles or Flat, curing mold work etc. (Heavy duty),Frame suitable for 50cm opening of MH.
30
-
-
Providing Cover suitable for 50cm opening of MH.
30
-
-
Providing C.I. grating 150 mm dia.
83
-
-
Providing Carriage of CI grating (more than 10 ton).
83
-
-
Providing and Fixing Precast Concrete Saucer Drain of size 0.3 x 0.2 in cement concrete etc. complete as as directed by Engineer Incharge.
700
-
-
MAIN DISTRIBUTION BOARD (MDB)
S.I.T.C. of MDB (Outdoor) totally enclosed type as per IS: 2147, Operation on 3-Phase, 415V, 50Hz, Neutral effectively grounded, IP-55, with power & control contactors as per IS: 13947, CT of accuracy class- I as per IS: 2705, Relays & control fuses, air insulated electrolyte grade Aluminum busbar for three phase & neutral system with thermal magnectic based/ air break fixed type MCCB with trip free mechanism, current limiting type, MCB as per IS/IEC 60898-2:2003, suitable rating outgoing feeders as per design & SLD drawings, digital type metering instruments, equipment fittings, bus bars, cable alleys, cable gland, incoming & ougoing cable connection chamber suitable for 1100V grade, Al./ Cu. conductor PVC insulated & PVC sheathed armoured cable, 10% spare terminals, power wiring use of 650/ 1100V grade, FRLS insulated copper conductor wires conforming to IS: 694 & 8130, cable compartments of minimum 350 mm size, Aluminium earth bus bar for entire length as per SLD, detail specifications & data sheet including required testing @ factroy as per applicable IS/ IEC standards. MDB shall be comprising of:
a) Incomer of approved make Four pole moulded case circuit breaker having breaking capacity ICU of 25 KA. at 415 V. having normal current rating up to 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S. housing, energy meter 3 phase 4 wire unbalanced load 500 V.50A / 100A complete erected as directed with necessary earth wire, voltmeter, VSS and R,Y,B indication lamp. (1 No.) b) Outgoing of 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having 63A capacity , erected as directed with necessary earth wire.(8 Nos.)
c) Supplying and erecting of 200 A triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each busbar,erected in existing cubical panel with necessary connections.
d) Refer SLD TCE.11364A-EL-4000-AU-4005 for more details. The makes of Switchgear shall be like Siemens, ABB, Schneider Electric, L&T or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
NB: The standard companies switch gear shall be used and only manufacturers at CPRI approved factory and shall be certified by that company whose switch gears are used after fabrication for beneficial use. Price of Panel comprises of pedestrial of minimum 350 mm height made of MS angle/ channel/ flats of favourable shapes.
1
-
-
SUB DISTRIBUTION BOARD-1 (SDB-1)
S.I.T.C. of SDB-1 (Outdoor) totally enclosed type as per IS: 2147, Operation on 3-Phase, 415V, 50Hz, Neutral effectively grounded, IP-55, with power & control contactors as per IS: 13947, CT of accuracy class- I as per IS: 2705, Relays & control fuses, air insulated electrolyte grade Aluminum busbar for three phase & neutral system with thermal magnectic based/ air break fixed type MCCB with trip free mechanism, current limiting type, MCB as per IS/IEC 60898-2:2003, suitable rating outgoing feeders as per design & SLD drawings, digital type metering instruments, equipment fittings, bus bars, cable alleys, cable gland, incoming & ougoing cable connection chamber suitable for 1100V grade, Al./ Cu. conductor PVC insulated & PVC sheathed armoured cable, 10% spare terminals, power wiring use of 650/ 1100V grade, FRLS insulated copper conductor wires conforming to IS: 694 & 8130, cable compartments of minimum 350 mm size, Aluminium earth bus bar for entire length as per SLD, detail specifications & data sheet including required testing @ factroy as per applicable IS/ IEC standards. SDB-1 shall be comprising of:
a) Incomer of 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having 63A capacity with voltmeter, VSS and R,Y,B indication lamp. (1 No.) b) Outgoing of 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having 6-32A capacity with approved make. energy meter 3 phase 4 wire unbalanced load 500 V.50A / 100A complete erected as directed with necessary earth wire.(19 Nos.)
c) Outgoing of 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having 6-32A capacity.(2 Nos.)
b) Outgoing of 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having6-32A capacity with Approved make single phase electronic energy meter rating 5A/20A/40A based on ASIC (Application Specific integral circuit) digital technology with accuracy Class-I, temper proof, free from effect of external magnetic field with phase, earth, reverse and impulse indications, 6 digit electro-mechanical counter suitable to work on 120 V to 300V, 45 - 55 Hz., housed in robust enclosure complete to be erected as directed with 3 year replacement guarantee. (Cat. II). (2 Nos.)
d) Supplying and erecting of 100 A triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each busbar,erected in existing cubical panel with necessary connections.
e) Refer SLD TCE.11364A-EL-4000-AU-4005 for more details. The makes of Switchgear shall be like Siemens, ABB, Schneider Electric, L&T or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
NB:
The standard companies switch gear shall be used and only manufacturers at CPRI approved factory and shall be certified by that company whose switch gears are used after fabrication for beneficial use.
Price of Panel comprises of pedestrial of minimum 350 mm height made of MS angle/ channel/ flats of favourable shapes.
1
-
-
SUB DISTRIBUTION BOARD-2 (SDB-2)
S.I.T.C. of SDB-2 (Outdoor) totally enclosed type as per IS: 2147, Operation on 3-Phase, 415V, 50Hz, Neutral effectively grounded, IP-55, with power & control contactors as per IS: 13947, CT of accuracy class- I as per IS: 2705, Relays & control fuses, air insulated electrolyte grade Aluminum busbar for three phase & neutral system with thermal magnectic based/ air break fixed type MCCB with trip free mechanism, current limiting type, MCB as per IS/IEC 60898-2:2003, suitable rating outgoing feeders as per design & SLD drawings, digital type metering instruments, equipment fittings, bus bars, cable alleys, cable gland, incoming & ougoing cable connection chamber suitable for 1100V grade, Al./ Cu. conductor PVC insulated & PVC sheathed armoured cable, 10% spare terminals, power wiring use of 650/ 1100V grade, FRLS insulated copper conductor wires conforming to IS: 694 & 8130, cable compartments of minimum 350 mm size, Aluminium earth bus bar for entire length as per SLD, detail specifications & data sheet including required testing @ factroy as per applicable IS/ IEC standards. SDB-2 shall be comprising of:
a) Incomer of 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having 63A capacity with voltmeter, VSS and R,Y,B indication lamp. (1 No.) b) Outgoing of 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having 6-32A capacity with approved make. energy meter 3 phase 4 wire unbalanced load 500 V.50A / 100A complete erected as directed with necessary earth wire.(9 Nos.)
c) Outgoing of 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having 6-32A capacity.(2 Nos.)
d) Outgoing of 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having6-32A capacity with Approved make single phase electronic energy meter rating 5A/20A/40A based on ASIC (Application Specific integral circuit) digital technology with accuracy Class-I, temper proof, free from effect of external magnetic field with phase, earth, reverse and impulse indications, 6 digit electro-mechanical counter suitable to work on 120 V to 300V, 45 - 55 Hz., housed in robust enclosure complete to be erected as directed with 3 year replacement guarantee. (Cat. II). (3 Nos.)
e) Supplying and erecting of 100 A triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each busbar,erected in existing cubical panel with necessary connections.
f) Refer SLD TCE.11364A-EL-4000-AU-4005 for more details. The makes of Switchgear shall be like Siemens, ABB, Schneider Electric, L&T or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
NB:
The standard companies switch gear shall be used and only manufacturers at CPRI approved factory and shall be certified by that company whose switch gears are used after fabrication for beneficial use.
Price of Panel comprises of pedestrial of minimum 350 mm height made of MS angle/ channel/ flats of favourable shapes.
1
-
-
SUB DISTRIBUTION BOARD-3 (SDB-3)
S.I.T.C. of SDB-4 (Outdoor) totally enclosed type as per IS: 2147, Operation on 3-Phase, 415V, 50Hz, Neutral effectively grounded, IP-55, with power & control contactors as per IS: 13947, CT of accuracy class- I as per IS: 2705, Relays & control fuses, air insulated electrolyte grade Aluminum busbar for three phase & neutral system with thermal magnectic based/ air break fixed type MCCB with trip free mechanism, current limiting type, MCB as per IS/IEC 60898-2:2003, suitable rating outgoing feeders as per design & SLD drawings, digital type metering instruments, equipment fittings, bus bars, cable alleys, cable gland, incoming & ougoing cable connection chamber suitable for 1100V grade, Al./ Cu. conductor PVC insulated & PVC sheathed armoured cable, 10% spare terminals, power wiring use of 650/ 1100V grade, FRLS insulated copper conductor wires conforming to IS: 694 & 8130, cable compartments of minimum 350 mm size, Aluminium earth bus bar for entire length as per SLD, detail specifications & data sheet including required testing @ factroy as per applicable IS/ IEC standards. SDB-4 shall be comprising of:
a) Incomer of 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having 63A capacity with voltmeter, VSS and R,Y,B indication lamp. (1 No.) b) Outgoing of 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having 6-32A capacity with approved make. energy meter 3 phase 4 wire unbalanced load 500 V.50A / 100A complete erected as directed with necessary earth wire.(15Nos.)
c) Outgoing of 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having 6-32A capacity.(2 Nos.)
b) Outgoing of 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having6-32A capacity with Approved make single phase electronic energy meter rating 5A/20A/40A based on ASIC (Application Specific integral circuit) digital technology with accuracy Class-I, temper proof, free from effect of external magnetic field with phase, earth, reverse and impulse indications, 6 digit electro-mechanical counter suitable to work on 120 V to 300V, 45 - 55 Hz., housed in robust enclosure complete to be erected as directed with 3 year replacement guarantee. (Cat. II). (1 Nos.)
d) Supplying and erecting of 100 A triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each busbar,erected in existing cubical panel with necessary connections.
d) Refer SLD TCE.11364A-EL-4000-AU-4005 for more details. The makes of Switchgear shall be like Siemens, ABB, Schneider Electric, L&T or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
NB:
The standard companies switch gear shall be used and only manufacturers at CPRI approved factory and shall be certified by that company whose switch gears are used after fabrication for beneficial use.
Price of Panel comprises of pedestrial of minimum 350 mm height made of MS angle/ channel/ flats of favourable shapes.
1
-
-
SUB DISTRIBUTION BOARD-4 (SDB-4)
S.I.T.C. of SDB-3 (Outdoor) totally enclosed type as per IS: 2147, Operation on 3-Phase, 415V, 50Hz, Neutral effectively grounded, IP-55, with power & control contactors as per IS: 13947, CT of accuracy class- I as per IS: 2705, Relays & control fuses, air insulated electrolyte grade Aluminum busbar for three phase & neutral system with thermal magnectic based/ air break fixed type MCCB with trip free mechanism, current limiting type, MCB as per IS/IEC 60898-2:2003, suitable rating outgoing feeders as per design & SLD drawings, digital type metering instruments, equipment fittings, bus bars, cable alleys, cable gland, incoming & ougoing cable connection chamber suitable for 1100V grade, Al./ Cu. conductor PVC insulated & PVC sheathed armoured cable, 10% spare terminals, power wiring use of 650/ 1100V grade, FRLS insulated copper conductor wires conforming to IS: 694 & 8130, cable compartments of minimum 350 mm size, Aluminium earth bus bar for entire length as per SLD, detail specifications & data sheet including required testing @ factroy as per applicable IS/ IEC standards. SDB-3 shall be comprising of:
a) Incomer of 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having 63A capacity with voltmeter, VSS and R,Y,B indication lamp. (1 No.) b) Outgoing of 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having 6-32A capacity with approved make. energy meter 3 phase 4 wire unbalanced load 500 V.50A / 100A complete erected as directed with necessary earth wire.(7 Nos.)
c) Outgoing of 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having 6-32A capacity.(2 Nos.)
b) Outgoing of 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having6-32A capacity with Approved make single phase electronic energy meter rating 5A/20A/40A based on ASIC (Application Specific integral circuit) digital technology with accuracy Class-I, temper proof, free from effect of external magnetic field with phase, earth, reverse and impulse indications, 6 digit electro-mechanical counter suitable to work on 120 V to 300V, 45 - 55 Hz., housed in robust enclosure complete to be erected as directed with 3 year replacement guarantee. (Cat. II). (2 Nos.)
d) Supplying and erecting of 100 A triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each busbar,erected in existing cubical panel with necessary connections.
e) Refer SLD TCE.11364A-EL-4000-AU-4005 for more details. The makes of Switchgear shall be like Siemens, ABB, Schneider Electric, L&T or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
NB:
The standard companies switch gear shall be used and only manufacturers at CPRI approved factory and shall be certified by that company whose switch gears are used after fabrication for beneficial use.
Price of Panel comprises of pedestrial of minimum 350 mm height made of MS angle/ channel/ flats of favourable shapes.
1
-
-
STREET LIGTHT FEEDER PILLAR (SLFP)
S.I.T.C. of Feeder Pillar (Outdoor) totally enclosed type as per IS: 2147, Operation on 3-Phase, 415V, 50Hz, Neutral effectively grounded, IP-55, with power & control contactors as per IS: 13947, CT of accuracy class- I as per IS: 2705, Relays & control fuses, air insulated electrolyte grade Aluminum busbar for three phase & neutral system with thermal magnectic based/ air break fixed type MCCB with trip free mechanism, current limiting type, MCB as per IS/IEC 60898-2:2003, suitable rating outgoing feeders as per design & SLD drawings, digital type metering instruments, equipment fittings, bus bars, cable alleys, cable gland, incoming & ougoing cable connection chamber suitable for 1100V grade, Al./ Cu. conductor PVC insulated & PVC sheathed armoured cable, 10% spare terminals, power wiring use of 650/ 1100V grade, FRLS insulated copper conductor wires conforming to IS: 694 & 8130, cable compartments of minimum 350 mm size, Aluminium earth bus bar for entire length as per SLD, detail specifications & data sheet including required testing @ factroy as per applicable IS/ IEC standards. Feeder Pillar shall be comprising of:
a) Incomer of 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having 6-32A capacity with approved make. energy meter 3 phase 4 wire unbalanced load 500 V.50A / 100A complete erected as directed with necessary earth wire, voltmeter, VSS and R,Y,B indication lamp. (1 No.) b) Outgoing of 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having 6-32A capacity.(5 Nos.)
c) Supplying and erecting of 100 A triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each busbar,erected in existing cubical panel with necessary connections.
d) Refer SLD TCE.11364A-EL-4000-AU-4005 for more details. The makes of Switchgear shall be like Siemens, ABB, Schneider Electric, L&T or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
NB:
-The standard companies switch gear shall be used and only manufacturers at CPRI approved factory and shall be certified by that company whose switch gears are used after fabrication for beneficial use.
-Price of Panel comprises of pedestrial of minimum 350 mm height made of MS angle/ channel/ flats of favourable shapes.
-Incomer shall be equiped with astronomical time switch having 1 output per phase and suitable for single phase supply to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required.
1
-
-
SHOP DISTRIBUTION BOARD-1 (SHDB-1)
S.I.T.C. of SHDB-1 with the following particulars:
a) Incomer of 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having 32A capacity along with 32A four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA. (1 No.)
b) Outgoing of single pole 6A -32A MCB suitable to operate on 240 V A.C. system and having breaking capacity 10 KA (6 Nos.)
c) Supplying and fixing 6way , Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) The makes of Switchgear & DB shall be like Siemens, ABB, Schneider Electric, L&T or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
37
-
-
SHOP DISTRIBUTION BOARD-2 (SHDB-2)
S.I.T.C. of SHDB-2 with the following particulars:
a) Incomer of 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having 32A capacity along with 32A four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA. (1 No.)
b) Outgoing of single pole 6A -32A MCB suitable to operate on 240 V A.C. system and having breaking capacity 10 KA (8 Nos.)
c) Supplying and fixing 8 way , Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) The makes of Switchgear & DB shall be like Siemens, ABB, Schneider Electric, L&T or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
6
-
-
SHOP DISTRIBUTION BOARD-3 (SHDB-3)
S.I.T.C. of SHDB-2 with the following particulars:
a) Incomer of 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having 32A capacity along with 32A four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA. (1 No.)
b) Outgoing of single pole 6A -32A MCB suitable to operate on 240 V A.C. system and having breaking capacity 10 KA (12 Nos.)
c) Supplying and fixing 12 way , Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) The makes of Switchgear & DB shall be like Siemens, ABB, Schneider Electric, L&T or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
15
-
-
Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor, galvanised steel flat strip / round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes. The makes of cable shall be like RR Cable, Polycab, RPG, Universal, Finolex or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
(f) 3.5 Core x 120 Sq. mm
225
-
-
Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor, galvanised steel flat strip / round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes The makes of cable shall be like RR Cable, Polycab, RPG, Universal, Finolex or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
(c) 3.5 Core x 50 Sq. mm
500
-
-
Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor, galvanised steel flat strip / round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes. The makes of cable shall be like RR Cable, Polycab, RPG, Universal, Finolex or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
(e) 4 Core x 16 Sq. mm
800
-
-
Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor, galvanised steel flat strip / round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes. The makes of cable shall be like RR Cable, Polycab, RPG, Universal, Finolex or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
(c) 4 Core x 6 Sq. mm
3555
-
-
Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor, galvanised steel flat strip / round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes. The makes of cable shall be like RR Cable, Polycab, RPG, Universal, Finolex or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
(a) 3 Core x 2.5 Sq. mm
4000
-
-
Providing & fitting heavy duty brass cable glands (nickel-plated) with washers & rubber ring conforming to IS, suitable for 3, 3½ & 4 core cables of following type & sizes (Double Compression). The makes of cable gland shall be like Comet, Dowells, Beaco or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
(c) 6 Sq. mm
140
-
-
Providing & fitting heavy duty brass cable glands (nickel-plated) with washers & rubber ring conforming to IS, suitable for 3, 3½ & 4 core cables of following type & sizes (Double Compression). The makes of cable gland shall be like Comet, Dowells, Beaco or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
(e) 16 Sq. mm
5
-
-
Providing & fitting heavy duty brass cable glands (nickel-plated) with washers & rubber ring conforming to IS, suitable for 3, 3½ & 4 core cables of following type & sizes (Double Compression). The makes of cable gland shall be like Comet, Dowells, Beaco or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
(h) 50 Sq. mm
10
-
-
Providing & fitting heavy duty brass cable glands (nickel-plated) with washers & rubber ring conforming to IS, suitable for 3, 3½ & 4 core cables of following type & sizes (Double Compression). The makes of cable gland shall be like Comet, Dowells, Beaco or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
(k) 120 Sq. mm
3
-
-
Providing & fitting crimping type Cable Terminals (Lugs) conforming to IS of following types and sizes Aluminium Tubular Terminals(Long Barrel) (in Sq.mm.)- The makes of cable lugs shall be like Comet, Dowells, Beaco or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). (c) 6 Sq. mm
560
-
-
Providing & fitting crimping type Cable Terminals (Lugs) conforming to IS of following types and sizes Aluminium Tubular Terminals(Long Barrel) (in Sq.mm.)- The makes of cable lugs shall be like Comet, Dowells, Beaco or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). (e) 16 Sq. mm
20
-
-
Providing & fitting crimping type Cable Terminals (Lugs) conforming to IS of following types and sizes Aluminium Tubular Terminals(Long Barrel) (in Sq.mm.)- The makes of cable lugs shall be like Comet, Dowells, Beaco or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). (h) 50 Sq. mm
40
-
-
Providing & fitting crimping type Cable Terminals (Lugs) conforming to IS of following types and sizes Aluminium Tubular Terminals(Long Barrel) (in Sq.mm.) - The makes of cable lugs shall be like Comet, Dowells, Beaco or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO). (k) 120 Sq. mm
10
-
-
Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material at required depth for laying of cable. below ground / road surface for enclosing cable and back filling the same to make ground as per original. The makes of DWC pipe shall be like Rex, Duraline or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
(A)50 mm dia
5080
-
-
Making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the run and backfilling the same and making the surface as normal ground.
5080
-
-
Covering of cable with second class bricks or cement tiles laid cover the cable crosswise & also on both sides with covering of 7. 5 Cms. layer of sand above & below cable (16 bricks per meter)
5080
-
-
INDOOR LIGHTING- Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD 10 %,
CCT 4000 K to 6500K, Uniformity ratio 0.7,
Luminaire efficacy 85 lumens/watt ,
LED driver efficiency 85 %
CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates)
(A) Tube Light with integral/ non-integral driver
(e) 36 Watts, Surge-4 KV, IP-20, 4 feet - Cat-lll
The makes of Lighting fixtures shall be like Wipro, Philips, Crompton Greaves, Bajaj ,Havel or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
139
-
-
INDOOR LIGHTING- Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD 10 %,
CCT 4000 K to 6500K, Uniformity ratio 0.7,
Luminaire efficacy 85 lumens/watt ,
LED driver efficiency 85 %
CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates)
(A) Tube Light with integral/ non-integral driver
(d) 20-22 Watts, Surge - 4KV,IP-20, 4 feet - Cat-ll
The makes of Lighting fixtures shall be like Wipro, Philips, Crompton Greaves, Bajaj ,Havel or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
549
-
-
LED OUTDOOR FITTINGS- Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD 10 %, CCT 5000 K to 5700K,
Uniformity ratio 0.45, Luminaire efficacy 85 lumens/watt . LED driver efficiency 85 %.
CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. ( Each fittings required LM-79 & LM-80 certificates)
'E) Post Top Lantern LED fitting comprises of 650 MM TOP Diameter, 120 degree beam angle with 3 Nos. Supporting Ribs proposed for Gardens & Promenade as equi to LANCE made LL41C-030-CW-XXXX.
(a) 30 W - Cat-ll
The makes of Lighting fixtures shall be like Wipro, Philips, Crompton Greaves, Bajaj ,Havel or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
55
-
-
Supplying & erecting Galvanized iron pipe post “B” class 88.9 mm O.D 6 mtr. Long duly painted with two coats of aluminium paint complete with metallic base- plate of 300 mm x 300 mm x 4mm thick for using as a compound light pole with approx. weight 47 Kg. The makes of Iron Post shall be like Bajaj, Transrail or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
55
-
-
Pole Founadation- The pole shall be provided in excavation and base 1 :4: 8 installed in cement concrete foundation (1:2:4) i. e. 1 cement, 2 coarse sand and 4 graded stone with the help of anchor bolts complete as required as per the directions of Engineer in charge.
55
-
-
POINT WIRING IN COPPER ( MODULAR)- Providing following type of Modular type accessories mounted with PVC/ metallic box, single mounting base frame covered with textured/ metallic front plate, modules erected with necessary connection as desired by Engineer In charge. The makes of Modular switches shall be like Legrand, Crabtree, Clipsal, Anchor, MK or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO)
(A) One No. SP 6 Amp. - Cat.II
688
-
-
POINT WIRING IN COPPER ( MODULAR)- Providing following type of Modular type accessories mounted with PVC/ metallic box, single mounting base frame covered with textured/ metallic front plate, modules erected with necessary connection as desired by Engineer In charge. The makes of Modular switches shall be like Legrand, Crabtree, Clipsal, Anchor, MK or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
(I) 16 Amp. SP one way switch- Cat.II
754
-
-
POINT WIRING IN COPPER ( MODULAR)- Providing following type of Modular type accessories mounted with PVC/ metallic box, single mounting base frame covered with textured/ metallic front plate, modules erected with necessary connection as desired by Engineer In charge. The makes of Modular switches shall be like Legrand, Crabtree, Clipsal, Anchor, MK or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
(J) 6/16Amp. Universal socket - Cat.II
754
-
-
CONDUIT AND ACCESSORIES- Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc. complete of following sizes. The makes of Conduits shall be like Precision, Polycab or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
(a) 20 mm
5985
-
-
EARTHING- Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required.
125
-
-
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
350
-
-
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
500
-
-
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
870
-
-
Cable- Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. The makes of cable shall be like RR Cable, Polycab, RPG, Universal, Finolex or as per the appproved make list of PWD or as approved by Chief Technical Officer (CTO).
3 x 1.5 sq. mm
1995
-
-
Operation & Maintenance Cost for First (1) year.
1
-
-
Operation & Maintenance Cost for Second (2) year.
1
-
-
Operation & Maintenance Cost for Third (3) year.
1
-
-
Operation & Maintenance Cost for Fourth (4) year.
1
-
-
Operation & Maintenance Cost for Fifth (5) year.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements