UT Administration Of Dadra And Nagar Haveli Tender

Demolition and disposal of unserviceable materials with all lead and lift (i) Cement Concrete.

Dismentalling Door, Window ventilators etc. (wood or steel) shutters incl. Chawkhast architraves hold fast and other atachments etc. complete and stacking them within all lead and lift not ecxeeding 3 Sq.m in area.

Removing and scraping of old deteriorated plaster of any thckness from wall/R.C.C. member including stacking of serviceable material of unserviceable from site of work with all lead and lift.

Providing and laying cement concrete 1:3:6 (1 cement :3 coarse sand :6 crushed stone aggregate 20mm nominal size) and curing complete including cost of formowork for foundation plinth.

Providing and laying cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) for reinforced concrete column/beam/Lintel/chhajja upto floor two level including finishing the exposed surfaces with cement mortar 1:3 (1 cement :3 fine sand) to give a smooth and even surface including centering and formwork and curing complete excluding cost of reinforcement.

Providing TMT Bar FE 5OOD reinforcement for R.C.C. work including bending, binding and placing in position compelete upto floor two level.

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in walls, ceilings and sofits of stair and finishing with floating coats of neat cement slurry (i) Cement mortar 1:3 (1-cement :3-sand).

Providing 20mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in walls, ceiling and sofits of stair and finishing with floating coats of neat cement slurry (i) Cement mortar 1:3 (1-cement :3-sand).

Providing and laying polished kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1 cement :6 coarse sand) or lame putty "1.5 coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and plishing etc. complete (A) 25mm thick (upto 10 ton).

P & L 24" x 24" vitrified 8mm thick tile flooring over 20mm (average) base of cement mortar 1.6 (1 cement :6 coarse sand) on new surface or fixing on exising flooring by adhesive material including dismentaling of exising flooring and jointed with color cement slurry including finished with flush pointing & cleaning the surface etc. complete for antiskit.

Providing and laying ceramic tiles 6mm thick in skirting riser of steps and dedo on 10mm thick plaster in CM 1:3 (1-cement :3 coarse sand) and jointed with white cement slurry.

Reparing of doors, windows and ventilator by providing and fixing required fixtures and fastenings like Adrop 20mm dia. With iron oxidised fitting, brass handle, hinges, Tadi etc as per the direction of engineer incharge.

Providing and fixing 35mm thick shutter for doors, windows, and clerstory windowns including Indian Teak wood fromes 10cm x 7cm size including black enamelled iron oxidixed fixtures and fastening including primary coat of approved quality and two coats of oil painting etc. complete fully panelled.

Providing and fixing water closet squatting pan (European type WC pan) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 including fixing plastic seat cover with brass hinges and rubber buffter and including providing and fixing 12.5 Litres low level flushing cistern with all required fittings etc. complete in vitreous china in white color.

Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm (A) Vitreous China (I) Long pattern = White colour and fixing 100mm size P or S trap for water closet squatting pan including jointing the trap with the pan and soil pipe in cement Mortar 1:1 (1-Cement :1-Fine sand) (A) Vitreous China and fixing in Cement Mortar 1:3 (1-Cement :1-Fine sand), pair of white vitreous China 250mm x 130mm x 30mm footrest to long pattern squatting pan water closet. Providing and fixing chroumium plated brass half turn flush cock of approved quality including fixing in pipe line etc. complete. (ii) 25mm dia. etc. complete as directed by enginner-incharge.

Providing and fixing wash basin with single hole for pillar tap with CI or MS brackets painted white including shutting holes and making good the same but excluding fitting vitreous chine flat back washbain 550mm x 400mm size in white color including waste pipe 32mm.

Providing and fixing urinal of approved quality including connection with trap and with waste pipe tap etc. complete white earthware flat back or corner type size 430mm to 260mm x 350mm.

Providing and fixing screw down bib tap of 15mm dia Gun metal screw down bib tap.

Providing and fixing pillar tap capstan head screw down high pressure with screws shanks and back nuts 15mm dia.

Providing and fixing brass screw down stop tap 15mm dia.

Providing and fixing chromium plated brass halt turn flush cock of approved quality including fixing in pipeline etc. complete 25mm dia.

Providing and fixing castiron (Spun) Nahanitrp of the following nominal dia. of self cleaning design with C.I. screwed down or hinged grating incl. cost of cutting and making good the walls and floor 100mm inlet and 50mm outlet 100mm dia.

Providing and fixing CP brass waste pipe for washbasing or sink or urinal 32mm dia.

Construction of B.B. Masonary Kundi of clear inside dimension size 0.60M x 0.45M x 0.45M with 23cm thick B.B. masonary wall in C:M 1:6 including equired excavation, C.C. 1:5:10 15cms. Thick refilling 12mm thick cement plaster to masonary and floor C.C. layer and fixing the cast R.C.C. manhole cover of size 0.60M x 0.45M with frame and white/colour wash etc. complete.

Providing and supplying in stardard length ISI mark rigid unplasticised PVC pipes suitable for potable water with ring fit joints including cost of rings, as per IS specification no.4985/1988 including all local and central taxes transportation, freight charges, Octori , inspection charges, loading, unloading, conveyance to the site of work including cost of jointing materials etc. complete. Test pressure 4 kg/cm2 110mm dia.

Providing and supplying in stardard length ISI mark rigid unplasticised PVC pipes suitable for potable water with ring fit joints including cost of rings, as per IS specification no.4985/1988 including all local and central taxes transportation, freight charges, Octori , inspection charges, loading, unloading, conveyance to the site of work including cost of jointing materials etc. complete. Test pressure 4 kg/cm2 160mm dia.

Providing Material, Labour and equipments for Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thickjointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : including Khurra & Gola work With average thickness of 120 mm and minimum thickness at khurra as 65 mm, etc complete as directed by engineer-incharge with three year warranty period.

Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroghly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials etc. complete.

Distempeing (Two coats) with oil bound washable distemper of approved brand manufacture and of required shade on wall surfaces to give an even shade over and including a priming coat with alkali resistance primer of approved brand after throughly brushing the surface and other foreign matter and also including prepairing the surface even and sand parpered smooth.

Painting two coats (including priming coat) on new steel and other metal surface with enamel paint, brushing interior to give an even shade including cleaning the surfaces an even shade including cleaning the surface an even shade including cleaning the surface of all dirt, dust and other foreign matter.

Brick work using common brunt clay building bricks having crushing stregnth not less than 35 kg/Sq.Cm. in foundation and plinth in Cement Mortar 1:5 (1-Cement :5-fine sand) (B) Conventional Extra for brick work in superstructure above plinth level upto floor two level (B) Conventional.

Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws, (A) Plain Grill.

Providing and laying and jointing in true line and level 25 mm dia UPVC pipe (SCH-40) for cold water including fittings as approved by Engineer in charge. Pipe shall be fixed on the wall with the help of clamp at every two metre c/c or shall be concealed as directed including necessary fitting etc. including testing of pipe and joints and fixing the same with adhesive solvent including cost of all materials.

Providing and laying and jointing in true line and level 15 mm dia UPVC pipe (SCH-40) for cold water including fittings as approved by Engineer in charge. Pipe shall be fixed on the wall with the help of clamp at every two metre c/c or shall be concealed as directed including necessary fitting etc. including testing of pipe and joints and fixing the same with adhesive solvent including cost of all materials.

Providing and applying water proof treatment by appyling paints of Asian paints make with three year waterproofing warranty.

Providing and fixing Point wiring for Light/Fan/Bell/Primary Point with 02 wire 1.50 sq.mm. & earthwire of 1.50 sq.mm (Green) both are of ISI marked FRLS PVC insulated multistrand copper wires, in existing pipe duly erected, complete with 6A Tission Type ISI Marked flush type with bell push and accessories etected on polished woode block/Metal/PVC Boc covered with 3mm thick laminated sheet (a) For Open wiring (c.c. Wiring).

Providing and fixing Mains wiring with 1.1KV graded FRLS PVC insulated ISI marked stranded Copper conductor wire in existing pipe crected with 1.5sq.mm. Copper conductor FRLS PVC insulated stranded wire of green colour for earth. Continuty of following size (B) 2 wire 2.5 sq.mm.

Supplying and erecting of approved make Ceiling fan with Double Ball bearing ISI mark with Condenser 230 volt A.C. 50 C/s 1200mm sweep complete. Conopy & 30cm. Down rod erected on existing hook or clamp with 24/0.2 flat, 3 core flexible wire with earthing.

Approved make fluorescent tube 120cms 36/40 watt erected if requred. Cat.III.

Providing & erecting white stove enameled Box type /Minolta fluorescent fitting complete with Electronic Ballast assembly, tube holders erected with lead wires & connnection suitable for one tube 36/40 watt. 120 cmc. Cat.III.

Providing and Fixing electric pannel board 200A of ISI mark including all accessories of fitting etc.

Providing and fixing FRP fram size 125 x 65 mm and 35mm thick FRP shutter with wood grain raised panneled clesign finish shutter Having extra reinforcement on sides & edges in Gel coat finish. The core of the shutter & frame is to be finled up with injeted polyurethene form done in situ alongwith embed wooden places for stiffning & also taking hinges & finutures. The whole FRP frame & shutter is to be water proof weather proof, termite proof & resistance to mild acid acid/alkall. Rates are to be inclusive of S.S. hines with fastener sleeve & alluminium fixtures & fastenings.

Providing and fixing extruded aluminum window having extruded alumimum Colour Powder Coated section frame main outer size 63.50mm x 38.10mm x 1.95mm @Wt.1.094 Kg/mt. horizontal two track member size 61.85mm x 31.75mm x 1.20mm @ Wt.0695 Kg./mt. vertical member of size 61.85mm x 31.75mm x 1.30mm, @ Wt. 0.659 Kg./mt. with sliding shtters of horizontal member size 40mm x 18mm x1.29mm @ wt. of 0.456Kg./mt, vertical member of size 40mm x 18mm x 129mm @ wt. of 0.456 Kg/mt, @ with 5mm thick trasparent bronze colour tinted float glass with powder coated alumimum fittings and fixtures and transparent slilicon sealant glass fixing to frame as per details etc. complete for window.

Providing and fixing precast rubble dye/steel dye interiocking concrete block 60mm thick with grade of concrete M300 pnumattic compressed/vibrated mechanically and as per approved design confirming to IS 15658 :2006 including 35mm sand layer for levelling and filling the joints with sand in proper line and level as per the guideline of IRC SP 63-2018 etc. complete.

Providing and fixing precast kerb stone with grade of concrete M.300 pnumattic compressed/vibrated mechanically and as per approved design confirming to IS 15658 :2006 including 35mm sand layer for levelling and filling the joints with sand in proper line and level as per the guideline of IRC SP 63-2018 etc. complete.

Providing material and labour charge for Water Harvesting/recharge structure including excavation for recharge chamber/around bore 2.30 x 1.95mt. Upto 1.50 MT depth PCC 1:3:6 of 20 cm thick B.B. Masonary 0.23 mt. thick with CM 1:6 and 1.50mt. Height depth M-20 R.C.C. Slab 15mm thick cement plaster with CM 1:3 in which layer of Rubble 60cm deep, layer of unscreen gravel 30cm deep and 45 Rmt. PVC pipe of 110mm from chamber to well through core cutting in well and other pipe provide surround chamber including curing etc. complete as directed by engineer-in-charge.

Providing and erecting 3 star and above rated approved make split air conditioning unit consisting of condensing unit with fan motor, hermetically seated rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of proper insulated copper tubing upto 5 RMT suitable for (Cost includes MS stand. Gas charging & Internal Copper wiring & Remote Control) (A) for 1.5 ton capacity.