Water Resources Department Tender

Providing and placing in position cement concrete 1:2:4 with 40mm graded stone ballast for in-situ sleepers in canal bed and side slopes including form work and subsequent removal, mechanical mixing, vibration, finishing, curing, cutting, cleaning, etc., with all lead and lift of all materials complete as per approved drawings & specifications and as directed by Engineer in-charge.

Providing and fixing in position LDPE film of 150 Micron (0.15mm) ISI Mark 2508 (Grade-231), including heat-sealed joints at ends as per IS:9698-. with all lead and lift of all materials complete as per approved drawings and specifications and as directed by Engineer in-charge.

Providing and Filling contraction joints (grooves) as per IS:3873 with hot applied sealing compound IS:5256, including cleaning and washing grooves, painting its inner surfaces with primer IS:3384 at the rate of 1 litre per 4 sqm inclusive of cost of all materials for in-situ concrete lining- Groove of 33 mm depth -with all lead and lift of all materials complete as per approved drawings and specifications and as directed by Engineer in-charge.

Providing and placing in position cement concrete of M-15 grade (1:2:4 with 20 mm graded stone ballast) for in-situ lining in canal bed and side slopes and coping including form work and subsequent removal for laying in panels, screeding the surface of side slopes with winch operated slip form, finishing , making grooves as per IS. 3873, finishing vibration curing for 28 days, by constricting brick masonry drains with weep holes or perforated pipes on the coping at the top of lining or by sprinklers, cleaning etc. complete as per approved drawings and specifications and as directed by Engineer in-charge.

Providing and laying in position cement concrete with graded metal of maximum size 20mm for coping over walls & lining laid in alternate panels of 1.5m, i/c form work and subsequent removal, mechanical mixing, mechanical vibration,finishing, curing, cleaning cuttting & cement concrete 1:2:4 with graded metal of maximum size 40 mm, i/c form work, mechanical mixing, mechanical vibration and subsequent removal , finishing, curing, cleaning with all lead and lift of all materials compiete, as per approved drawings & specifications; and as directed by the Engineer-in- charge.

Providing and placing in position cement concrete 1:2:4 with 40mm graded stone ballast for safety ladder IS:3873, cement concrete 1:2:4 with graded metal of maximum size 40 mm, i/c form work, mechanical mixing, mechanical vibration and subsequent removal , finishing, curing, cleaning including form work and subsequent removal, mechanical mixing, vibration, finishing, making 10 mm wide grooves, curing, cleaning , cement concrete cast in-situ for piers, abutments returns/wings including providing V-shape false joints to form suitable panels in exposed faces to approved design including laying, vibrating, curing, finishing & Dewatering and pumping of the working area including all connected operations of laying of pipe line, removal of all seepage and other operations required for maintaining cleanliness for construction etc., with all lead and lift of all materials complete, as per approved drawings and specifications and as directed by Engineer in-charge.

Providing and Spreading of hard moorum for moorum topping on canal bank including collection,Stacking and dressing with all lead,lift and cost of all materials etc.complete in all respect as per approved design,drawing, specifications and as directed by Engineer-in-Charge.

Providing & fixing of chainage cum boundary stone (type design no 4 of W.R. Deptt.) made of precast 1:2:4 R.C.C. 20mm gladded metal including form work cost of reinforcements and embedding in cement concrete 1:3:6 with 40mm gladded metal including finishing, curing handling of stone, excavation in any strata, including painting with white back ground of enamel paint and figuring and lettering with black enamel paint, including cost of paints, brushes etc. complete in all respect with all material & labour cost etc. with all leads & lifts of all materials as per specifications, drawings & as directed by Engineer-in-Charge.

Providing and laying filter materials for drains of size (60x60x60)cm consisting of sand and gravel/metal of nominal size 10mm, 20mm, 40mm to be laid under cement concrete lining for pocket filters on canal bed & side slopes including tamping & dewatering if any etc. complete in all respect with all leads & lifts of all materials as per specifications, drawings & as directed by Engineer-in-Charge.

Providing & laying in position PVC corrugated, perforated pipes (88mm inner dia/100mm outer dia) conforming to IS: -9271 with synthetic filter envelope including joints providing and laying of sand filter blanket, around the drain pipes including grading and compaction i/c excavation in all type of strata etc. complete in all respect with all leads & lifts of all materials as per specifications, drawings & as directed by Engineer-in-Charge.

Filling foundations and around masonry works with materials obtained from spoils including watering and ramming i/c all lead and lift of all materials complete as per approved drawing and specifications and as directed by Engineer in-charge.

Providing and fixing in position NP3 / NP2 Hume Pipes of various diametres for bridge or canal structure, and collabas i/c handling, toeing, filling the joints with filler materials and cement mortar 1:3, curing etc., including cost of pipes, with all lead and lift of all materials compiete, as per approved drawings & specifications; and as directed by the Engineer-in- charge. (a) 1200 MM

(b) 900 MM

(c) 600 MM

(d) 150 MM

Providing and laying cement concrete 1:3:6 with graded metal of maximum size 40 mm i/c form work and subsequent removal, mechanical mixing, mechanical vibration,finishing, curing, cleaning cuttting, Dewatering and pumping of the working area including all connected operations of laying of pipe line, removal of all seepage and other operations required for maintaining cleanliness for construction etc. with all lead and lift of all materials compiete, as per approved drawings & specifications; and as directed by the Engineer-in- charge.

Providing and placing in position M-20 R.C.C. with graded metal maximum size 20 mm including cost of reinforcement & i/c form work and subsequent removal, mechanical mixing, mechanical vibration, finishing, cutting,curing, cleaning etc. with all lead and lift of all materials compiete, as per approved drawings & specifications; and as directed by the Engineer-in- charge.

Providing and placing in position reinforcement thermo-Mechanically treated bars FE 415for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth etc.complete including all lead and lift of all material as per drawings and specifications & as directed by Engineer-in Charge.

20mm thick cement plaster on stone work in Cement Mortar 1:4 i/c racking of old cement Mortar,Curing , all lead & lifts, all materials, all transportion charges of all materials as per approved drawing and specifications and as directed by Engineer in-charge.

Providing and fixing in postion 100 mm dia. A.C. pipe with grating for weep holes in abutments, wing walls and return walls with all lead and lift of all materials compiete, as per approved drawings & specifications; and as directed by the Engineer-in- charge.

Providing and fixing in postion 12 mm thick premoulded fillers non-extruding and resilient type (bitumen-impregnated fiber), IS:1838-1961, on the pier cap including with all lead, lift & cleaning of surface of all materials compiete, as per approved drawings & specifications; and as directed by the Engineer-in- charge.