Water Resources Department Tender

Providing and placing in position cast in situ cement concrete 1:2:4 with 40 mm graded metal for foundation, etc with mixing mechnically, laying, mechanical vibration, curing, finishing, dewatering and pumping of the working area etc. complete with all lead, lifts and cost of all materials as per drawing, design, specification and as directed by Engineer-in-Charge.

Providing and placing in position cast in situ cement concrete 1:2:4 with 20 mm graded metal for foundation, etc with mixing mechnically, laying, mechanical vibration, curing, finishing, dewatering and pumping of the working area etc. complete with all lead, lifts and cost of all materials as per drawing, design, specification and as directed by Engineer-in-Charge.

Providing and placing in position M-20 R.C.C. excluding cost of reinforcement with graded, metal of maximum size 20 mm including cleaning, washing of material, mechanical mixing laying, handling ramming, finishing, mechanical vibration, proper curing including form work and shuttering with steel plates etc. complete including all lead, lifts and cost of all materials as per drawings, specifications and as directed by Engineer-in-charge.

Supplying and fixing cold worked steel high strength bars conforming to grade Fe-415 of IS: 1786 reinforcement bars for RCC including cleaning, straightening, cutting, bending all handling, placing in position and binding with 0.90 mm annealed binding wire confirming to IS: 280-1978 (including cost of binding wire) etc. complete with all leads, lifts and cost of all materials with all respect as per drawing, specification and as directed by Engineer-in-Charge

Providing and fixing white vitreous china water closet squatting pan (Indian type) 580 mm size, IS: 2556 (Pt. II), with “P” or “S” trap with pair of foot rest, 25x13x3 cm, in white vitreous china, 12.5 liters mosquito proof C.I. flushing cistern, IS: 774, with 15 mm lead inlet and overflow with 15 mm lead inlet connection not less than 40 cm in length and 15 mm C.P. brass heavy stop cock IS : 781, G.I pull and chain,32 mm galvanised steel telescopic flush pipe or one piece 40 mm lead pipe with G.I. clamps and brass unions, 15 mm overflow pipe with necessary brass fittings and G.I. clamps for fitting it to wall, up to floor level, including all soldered and other joints filling of brick lime coba under the pan, making the holes in floors and walls and repairing the same with C.M. 1:3 plaster, repairing etc; to the original condition and approved type painting of system pipes and fittings etc. complete in all respect with all lead, lift and cost of all materials as per drawing, specification and as directed by Engineer-in- Charge.

Providing and laying Reinforced Cement Concrete pipe NP 3 / prestressed concrete pipe. (Laying Reinforced cement concrete pipe NP3 /prestressed concrete pipe for culverts including fixing collar with cement mortar 1:2 but excluding bedding below pipes, excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . complete in all respect with all lead, lift and cost of all materials as per drawing, specification and as directed by Engineer-in- Charge.

Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design with all lead, lift and cost of all materials as per drawing, specification and as directed by Engineer-in- Charge.

Providing and fixing in position 75mm dia .vent covel with all lead, lift and cost of all materials as per drawing, specification and as directed by Engineer-in- Charge.

Providing and fixing in position 110 mm dia .vent covel with all lead, lift and cost of all materials as per drawing, specification and as directed by Engineer-in- Charge.

providing & fixing 500 Lt. PVC water tank on roof of building and water supply fittings etc. complete in all respect with all lead, lift and cost of all materials as per drawing, specification and as directed by Engineer-in- Charge.

Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete (i)75 mm dia pipe(including pipe for water tank septic tank inlet outlet,pipe for soak pit ) complete in all respect with all lead, lift and cost of all materials as per drawing, specification and as directed by Engineer-in- Charge.

Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete (i)110 mm dia pipe(including pipe for water tank,septic tank inlet outlet,pipe for soak pit and tee ,elbow joint vent covel) complete in all respect with all lead, lift and cost of all materials as per drawing, specification and as directed by Engineer-in- Charge.

Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete (i)110 mm dia pipe(including pipe for water tank,septic tank inlet outlet,pipe for soak pit and tee elbow joint vent covel) complete in all respect with all lead, lift and cost of all materials as per drawing, specification and as directed by Engineer-in- Charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes , including copper alloy bib cock, G.I. elbow, G.I. tee equal and brass gun metal gate valve , having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in 25 mm nominal outer dia .Pipes complte in all respect with all lead, lift and cost of all materials as per drawing, specification and as directed by Engineer-in- Charge.

Dismantling terrazzo or mossaic or glazed vitreous or patent cement or tiled flooring or dados skirting of any thickness without sub base and limes or cement plaster of any thickness (SKIRTING ) etc. complete in all respect with all lead, lift and cost of all materials as per drawing, specification and as directed by Engineer-in- Charge.

Providing and laying ceramic glazed floor tiles 300x300mm conforming to IS : 15622 of approved make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete (in colour such as white ivory,grey,fume,redbrown) etc. complete in all respect with all lead, lift and cost of all materials as per drawing, specification and as directed by Engineer-in- Charge.

Filling foundations and around masonry works with materials obtained from spoils including watering and ramming i/c 50m lead. etc. complete in all respect with all lead, lift and cost of all materials as per drawing, specification and as directed by Engineer-in- Charge.

Fly ash brick (with the use of ash cement and sand) masonry in superstructure in with Cement mortar 1:4 etc. complete in all respect with all lead, lift and cost of all materials as per drawing, specification and as directed by Engineer-in- Charge.

Fly ash brick (with the use of ash cement and sand) masonry in superstructure in with Cement mortar 1:6 etc. complete in all respect with all lead, lift and cost of all materials as per drawing, specification and as directed by Engineer-in- Charge.

15mm thick cement plaster on brick work in with C.M. 1:3 with a floating coat of neat cement etc. complete in all respect with all lead, lift and cost of all materials as per drawing, specification and as directed by Engineer-in- Charge.

15 mm thick cement plaster 1:3 with water proofing compound (one packet of 1.6kg per bag of cement) etc. complete in all respect with all lead, lift and cost of all materials as per drawing, specification and as directed by Engineer-in- Charge.

15mm thick cement plaster on brick work in with C.M. 1:3 etc. complete in all respect with all lead, lift and cost of all materials as per drawing, specification and as directed by Engineer-in- Charge.

White washing with lime (two coats) and colour washing on plaster work etc. complete in all respect with all lead, lift and cost of all materials as per drawing, specification and as directed by Engineer-in- Charge.