Water Resources Department Tender

Providing and placing in position cast in-situ M-20 concrete with graded metal of maximum size of 20 mm (excluding cost of reinforcement for RCC work) including form work mechanical mixing, laying, mechanical vibrating, curing and finishing, form work etc. complete including all lead, lifts and cost of all materials as per drawings, specifications and as directed by Engineer-in-charge..

Supplying and fixing Cold worked steel high strength bars conforming to grade Fe 415 of I.S.: 1786 reinforcement bars for RCC Including cleaning, straightening, cutting, bending, all handling, placing in position and binding with 0.90 mm annealed binding wire confirming to I.S. 280-1978 (including cost of binding wire) etc. complete Including all lead, lifts and cost of all materials as per drawings, specifications and as directed by Engineer-in-charge.

Design/Drawing, fabrication, supply and erection of structural steel vertical lift crest gate, as per IS:4622 with skin plate stiffeners, ballast weight guides, embedded parts, sill beam, fitted with stainless steel flat, track beam and sealing frame fitted with stainless steel flat, roller, rubber seals, etc. complete with holst bridge and duly painted gates and all other parts of gate arrangements, exposed embedded parts and all un-machined ferrous surfaces, exposed to water, as per IS 14177-94, for which surface preparation by blast cleaning of Class

Providing and fixing 100 mm dia. A.C. pipe with grating for weep holes in abutments, wing walls and return walls etc. complete including all lead, lifts and cost of all materials as per drawings, specifications and as directed by Engineer-in-charge.

Providing and fixing in position 12 mm thick pre moulded fillers non extruding and resilient type (bitumen impregnated fibbers, 1.S.1838-1961), In expansion joints including cleaning of surface etc. complete including all lead, lifts and cost of all materials as per drawings, specifications and as directed by Engineer-in- charge.

Providing and laying in position cement concrete 1:2:4 with graded metal of maximum size 20 mm for cast in situ concrete blocks in drainage bed, laid alternately, including mechanical missing, form work, vibration, tamping, finishing, curing cleaning of joints etc. complete Including all lead, lifts and cost of all materials as per drawings, specifications and as directed by Engineer-in-charge.

Providing and fixing in position Steel work in single section such as angels, channels, flats and tees including forging and hoisting, fixing in position etc. complete Including all lead, lifts and cost of all materials as per drawings, specifications and as directed by Engineer-in-charge.

Filling foundations and around masonry works with materials obtained from spoils including watering and ramming etc. complete including all lead, lifts and cost of all materials. as per drawings, specifications and as directed by Engineer-in-charge.

Providing and fixing in position 76.50 cm high H type 1:2:4 RCC railing with graded metal of maximum size 12.5 mm over kerbs consisting of 74.5x28x6.5 cm precast panels 15x11cm precast hand rails, 81.5x20x20 cm pillars as per approved drawing including vibration, finishing, curing, handling and holsting etc. complete including all lead, lifts and cost of all materials as per drawings, specifications and as directed by Engineer-in-charge.

Providing and Fixing in the position Reinforced Concrete, Medium duty, Non-pressure Pipes, Class NP3, with ends of the pipes suitable for flush joints conforming to IS: 458/2003 (Fourth Revision) with Amendments 1. Nominal Diameter of Pipes in mm. 900 mm, RCCHPF80001057 including Hume Pipe for canal structures including handling, toeing, filling the joints with filler materials and cement mortar 1:3 curing etc. complete including all lead, all lifts and cost of all materials as per design, drawings, specifications and as directed by Engineer-in-charge.

Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections, joints mitred and welded with 15x3 mm lugs lommi long, with steel lugs, embedded in cement concrete blocks 1 xl 5x10cm of 1:3:6 with 20mm graded metal or with wooden plugs and screws or Rawal plugs and screws or with fixing clips or with bolts and nuts as required including providing and fixing of glass panes with glazing clips and special metal sash putty of approved make complete Including Applying a priming coat of approved steel primer. excluding the cost of metal beading and other fittings except necessary hinges or pivots as required etc. complete including all lead, all lifts and cost of all materials as per design, drawings, specifications and as directed by Engineer-in-charge.

Providing and applying 2 mm thick ready mix exterior grade putty (Birla wall care, Ultra tech Superfine W/R of (NCL), J.K. wall putty) on walls to make the surface smooth and even etc. complete including all lead, lifts and cost of all materials as per drawings, specifications and as directed by Engineer-in-charge.

Wall painting two or more coats (excluding priming coat) on new surface with plastic emulsion paint (IS: 5411-Pt-1) to give an even shade etc. complete Including all lead, lifts and cost of all materials as per drawings, specifications and as directed by Engineer-in-charge

Providing and fixing in position 1 m high pipe railing with 3 rows of 40 mm G.I. pipes and R.S.J. posts (ISLB-75@6.1kg/m) as per approved drawing No. T/SH/9-A (E-In-C, P.W.D.) Including 3 coats of painting etc. complete Including all lead, lifts and cost of all materials as per drawings, specifications and as directed by Engineer-in-charge.

Supply, installation, commissioning and testing of 7.50 HP 7.50 KW Solar Pump set with foundation frame connection of suction, delivery pipe with required capacity of solar panel and its all component duly connected with control panel, operating panel with the backup power system for 24 hours arrangement, fencing of premise including maintenance of whole solar system, solar pump set for 5 years etc. complete including all lead, all lifts and cost of all materials as per design, drawings, specifications and as directed by Engineer-In-charge.

Providing, laying, Jointing & field testing of PN 6 (6 kg/sqcm) High Density Polyethylene pipes, (HDPE) confirming to IS: 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror or heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process it may be required to be done with Jacks/ hydraulic jacks/ by fusion machine (50 mm and above fusion jointed and below 50 mm mechanical jointed) including running and maintenance of this system for 5 years etc. complete including all lead, all lifts and cost of all materials as per design, drawings, specifications and as directed by Engineer-in-charge.

Design and construction of underground pipe distribution network for hose Irrigation system for 300 Ha to outlet to 1 ha. (Including Cost Rs./ha of SCADA, valves, bends, manifolds, controls, Outlet Management System, Outlet with manual valve at one hectare with 10 times duty l/c communications), excluding rising main but with pressurized Irrigation with duty of 0.45 Lit/sec/ha and of working/ operation pressure not exceeding 4 kg/cm2 with the provisions of HDPE/DWC/SPIRAL DWC/MS/DI pipe conforming to BIS codes and relevant. International specification for pipes 63 mm to 900 mm diameter, Pipes of MS/DI conforming to relevant BIS codes for pipe dla greater than 900 mm. MS pipes shall be with 400 micron food grade epoxy/500 micron polyurethane for Inner surface and shotcrete/3 LPE/1000 micron polyurethane coating on outer surface. Di pipes shall be with cement mortar lining with seal coat for Inner surface and zino coating on outer surface The rates are Inclusive of All works like excavation, preparation of bedding, laying, Joining, backfilling testing and commissioning and testing of the system as per specifications and coded requirements, crossing of all natural drainage, nallas as per requirement of work complete. Providing and fixing all required valves, bends, manifolds, controls etc conforming to related SIS/European standards and including Supply, Erection and Commissioning, testing of Outlet Management System with outlet duty of 0.45 lit/sec/ha up to minimum 30 ha which should be able to control the flow as per desired minimum pressure of 1.5 meter exit gradient at service outlet which shall consist of orifice type of nozzle able to deliver desired flow of 4.5 lit/sec/ha at highest point of field facilitating uniform distribution of Water to all the users irrespective of its location, elevation and distance from the water supply source Including recording, measuring, monitoring and control with suitable power source and alternatively by solar

Operation, running and maintenance of whole system for 5 years & Handover to WUA etc. complete including all lead, all lifts and cost of all materials as per design, drawings, specifications and as directed by Engineer-in-charge.( Unit in Ha/year)