Urban Administration And Development Tender

APPLYING APPSEAL-UR COATING ON INNER SURFACE OF POOL AFTER ONE COAT OF LEVEL PLASTER: Cleaning of plastered surface dust & oil with wire brush from walls and bed, applying 4 coats of Appseal-UR on the plaster surface of pool wall and base, keeping minimum interwal of 6 hours between two coats by applying every next coat in right angle to the previous coat and allowing minimum 4 days curring to the final coat. Approximate area of treatment:

LADDERS MIXED model stainless steel AISI-304 ladders, width: 500mm, hadrails dia 43mm stainless steel non-slip steps, provided with electrical earthing connection and anchoring fixtures. (1) No. of treads-3

LADDERS MIXED model stainless steel AISI-304 ladders, width: 500mm, hadrails dia 43mm stainless steel non-slip steps, provided with electrical earthing connection and anchoring fixtures. (2) No. of treads-5

CONCRETE CUP ANCHORING FOR LANE ROPE Made of Stainless Steel AISI-316 with cross bas for concrete pools Make : Indigenous

FLOAT LINE TIGHTNER Float line tighners made of chromed brass Make : Indigenous

LEVEL ANCHOR FOR FALSE START Level Anchor fixing for 43 mm dia False start postsmade of stainless steel AISI-316 Make : Indigenous

LEVEL ANCHOR FOR BACK STROKE Level Anchor fixing for 43 mm dia backstroke indicator post Make : Indigenous

Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium corbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) minimum ompressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/ moisture proof and fire retardant and fixing on M.S (mild steel) frame made of 25 x 25 x 1.5 mm square hollow box section including applying a priming coat of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In- Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately.

Totally anticorrossive bobbin wound sand filter 2000 mm dia manufactured with fibre glass and polyester resin, fitted with manufactured with fibre grlass and polyester resin, fitted with collector arms and fiffuser made from unplasticised PVC and polypropelene, FIlter media height 1000mm and capable of accomodating flow rate of 110 M3/hr @ 35m3 /hr/m2 complete with lid in polyester resin and fibre glass for media charging, 2 no. pressure Gauges and associated tubing, manual air release valve, purge cap for sand discharge and 140 PVC flanged connection for inlet. Make: Astral, Spain Code: 00706/ Haywards

160mm valve battery buit in high pressure PVC piping PN 10 with flange connections to filters according to DIN standards. Provided with 5 No. 160mm Butterfly valves also in CI Body, SGI disc & Nitrile seat. Supports made of powder coated Msteel with clamps and fixing screws
Make: Valves -Astral /George Fischer, PVC Pipe /Fitting- Supreme/Eq.

FILTER MEDIA (A) Quartz Filter Media Mesh size 16/32

FILTER MEDIA (B) Quartz Filter Media Mesh size 8/16

Make: Indigenous RECIRCULATING PUMPS Horizontal monobloc recirculation pumps with body, pot type prefilter, and support in cast ironm impeller in bronze, shaft in SS, mechanicla seal and prefilter basket in AISI-316 stainless steel and with motor-3000rpm/1500 rpm, 3PH , 400/400V, 10 HP, 50 HZ, protection IP-54. Flow: 110 M3/hr @ 16.0 m head

Make: Pumps - Kirloskar /KSB, Prefilter - HAWA/Eq. ELECTRICAL CONTROL PANEL Integrated, cubical type, 16 SWG powder coated CRCA sheet control panel to mounted to the foundation. The control panel should be suitable for 440 volts, 50 Hz, 4 wire supply. Quoted price shall include with 25mm thick rubber mats, wiring, cabling, control wiring and copper grounding from control panel to various equipment like recirculation pump, dosing equipment, aggitator etc. The panel shall have compartment for bs bar and cable alleys. The panel should be in accordance with the specifications. Providing and fixing necessary cables, internal wiring for all equipments and power cabling for motors, dosing systems, controller etc. Control pannel should consists of Ameter, Volt meter, Selector Switch, Single phase preventor etc. Cost should be included in the cost of M.C.C. etc. Complete
Make Indeginous

See the SOR Attachment