State Warehousing Corporation Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Chhattisgarh government has posted on its website in a very hassle-free manner.
State Warehousing Corporation - CGSWC Tender
Opening Date3 Jan 2022
Closing Date24 Jan 2022
Tender AmountRefer Documents
Costs
EMD
₹ 4,37,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
89803Bid Award Id
ViewTender No
89803Tender Authority
State Warehousing Corporation ViewPurchaser Address
-Website
http://http://cgswc.cg.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm. Nominal size)
325.55
865637
2659
... More
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete.Thrermo-mechanically treated bars.
22083.58
1203555
54.5
... More
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
156.05
649636
4163
... More
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
65.14
277528
4260.5
... More
Above 4.00 M. to 8.00 M.
29.97
130609
4358
... More
Above 8.00 M. to 12.00 M.
0.46
2047
4450.5
... More
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :Foundations, footing, base of columns and plinth beam in any shape and size.
243.73
33878
139
... More
Columns-rectangular or square in shape.
(i) Up to 4m height
649.67
192951
297
... More
Above 4.00 M. to 5.00 M.
83.68
28242
337.5
... More
Above 5.00 M. to 6.00 M.
50.15
18956
378
... More
Above 6.00 M. to 7.00 M.
19.01
7955
418.5
... More
Above 7.00 M. to 8.00 M.
9.6
4406
459
... More
Above 8.00 M. to 9.00 M.
4.61
2302
499.5
... More
Wall of any thickness including attached pilasters, buttresses etc.
420.46
95864
228
... More
Above 5.00 M. to 6.00 M.
26.38
5922
224.5
... More
Above 6.00 M. to 7.00 M.
1.18
360
305.5
... More
Above 7.00 M. to 8.00 M.
1.98
685
346
... More
Above 8.00 M. to 9.00 M.
1.98
765
386.5
... More
Above 9.00 M. to 10.00 M.
2.12
904
427
... More
(D) weather shade chhajja cornies and moulding.
39.88
11724
294
... More
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
96.28
22625
235
... More
Edge of slab breaks in floorand wall up to 200mm
106.78
3630
34
... More
Beams, lintel, cantilevers & walls.
95.35
19260
202
... More
Above 5.00 M. to6.00 m
98.42
27852
283
... More
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in:Cement Mortar 1:6 (1 Cement : 6 Sand)
330.7
1079074
3263
... More
Extra for brick work In S/S above plinth & up to floor five level.
273.04
923967
3384
... More
Extra for brick work In S/S above 4.00 m & upto 8.00 M
172.4
604262
3505
... More
Filling from available stuff (Excluding rock) in trenches, plinth, sides of foundation etc in layers not exceeding 20cm. in depth consolidating each deposited layer by ramming and watering with a lead up to 50M. and lift up to 1.5M.
512.85
33335
65
... More
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
3884.44
1441127
371
... More
Extra for providing & fixing 4 mm. Thick glass strips in joints of Terrazzo floor/ cement concrete floor & or like. 40 mm. wide
412.92
7432
18
... More
60 mm. Wide
2822.4
70560
25
... More
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar
works.
853.6
58044
68
... More
Cement concrete flooring with cement concrete 1:2:4 concrete (1 cement : 2 course sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50mm thick
357.08
90698
254
... More
75mm thick
1771.22
611070
345
... More
Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
3572.49
326882
91.5
... More
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622
of approved make, colours, shades and size on wall and dados over 12
mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with matching pigment complete. Size upto 200x300mm
19.95
11710
587
... More
Providing and laying ceramic glazed floor tiles conforming to IS : 15622
of approved size, make, colour, shade laid on 20 mm thick Cement
Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
5.04
3487
692
... More
Providing and laying vitrified floor tiles with double charge/ multi charge
printing with water absorption less than 0.5% and conforming to IS :
15622 of approved make in all colours and shades and size mentioned
below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints with white cement and
matching pigments etc. complete. Size 600x600mm
62.71
72179
1151
... More
Extra for precast PCC/ RCC work of any mix including form work, hoisting
and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing
with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but
excluding reinforcement.
2.77
1299
469
... More
Providing and fixing factory made ISI marks steel doors, windows and
ventilators side/ top/ centre hung made up of standard rolled steel section
conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints
mitred and flash butt and sash bars tenoned and riveted/ welded with 10
cm long lugs of size 15x3mm embedded in cement concrete block
15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone
aggregate 20 mm nominal size) or rawl plugs and screws or with bolts
and nuts as required including providing and fixing of hinges, pivots,
handles, pegs, stays, rolling devices, locking arrangements, spring catch
etc., as required complete including applying a priming coat of red oxide
zinc chromate primer.
1105.44
97278
88
... More
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
825.93
55750
67.5
... More
Providing and fixing aluminium work for doors, windows, ventilators and
partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in wall/
floor with fixing clips or hold fasteners or bolts and nuts as required
aluminium sections shall be anodized transparent or dyed to approved
shade according to IS: 1868, minimum anodic coating shall be of grade
AC-15. (Glazing to be paid for separately: For fixed portion
27.38
9062
331
... More
For shutter of doors, windows & ventilators including providing and making
provision for fixing of fitting wherever required including the cost of PVC/
neoprene gasket required (Fittings shall be paid for separately).
43.32
14642
338
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading.With float glass panes of 6 mm thickness
8.16
6560
804
... More
Providing and fixing float glass panes with steel glazing clips and special metal sash putty of approved make in steel doors, windows, ventilators. 4 mm. Thick
37.88
20265
535
... More
Supplying and fixing rolling shutter of approved makes made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft, with brackets, side guides and arrangements for inside and out side locking with push and pull arrangement complete but excluding the cost of top cover and spring.80 x 1.25 mm. M.S. laths
71.44
120805
1691
... More
Extra for providing grilled rolling shutter manufactured out of 8 mm dia.
M.S. bar instead of laths as per approved design (area of grill provided,
only to be measured).
13.18
4309
327
... More
Providing and fixing 27.5cm. long wire spring for rolling shutters.
64
23168
362
... More
Providing and fixing M.S. sheet top cover for rolling shutter.0.90 mm. thick
64.75
25835
399
... More
Providing andfixing ball bearing for rolling shutters.
64
27072
423
... More
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.In Angle-iron frames
97.3
7151
73.5
... More
Providing and fixing in position welded steel wire fabric to concrete/ wooden/ angle iron posts including securing and screwing with G.I. tying wire, G.I. stapples, G.I.U-nails or steel pins etc., complete. Aperture 50x25mm
40.61
23107
569
... More
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
19.14
35064
1832
... More
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm
10
2380
238
... More
Providing and fixing stainless steel door latch with 12mm rod, 2.5mm
thick flap, necessary stainless steel screws etc complete. 250mm
5
425
85
... More
Providing and fixing stainless steel tower bolts (Barrel type) with
necessary stainless steel screws etc complete. 200 x10mm
10
705
70.5
... More
Providing and fixing stainless steel door handles having flap thickness
2.5mm, necessary stainless steel screws etc complete. 150 mm
10
245
24.5
... More
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
5
235
47
... More
Providing and fixing stainless steel piano hinges with necessary stainless
steel screws etc complete. Overall width 25 mm
20
2460
123
... More
Providing and fixing factory made PVC door shutters of specified
thickness made of styles and rails of a UPVC hollow section of specified
size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on
both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws.24 mm thick door shutters with styles and rails of size 59x24 mm
1.81
4342
2399
... More
Steel work in tubular structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer.Electric resistance or induction butt welded tubes Grade-300. Upto 5.00 M. height.
2871.82
268515
93.5
... More
Above 5.00 M. height.
22424.81
2157266
96.2
... More
Extra for providing and fixing wind ties of 40 x 6 mm flat iron section.
581.7
68640
118
... More
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : Crimp curve
83.7
52228
624
... More
Supply and fixing of precoated galvanized iron profile sheets (size, shape
and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/-
5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in
240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet
and polyester top coat 15-18 microns. Sheet should have protective guard
film of 25 microns minimum to avoid scratches while transportation and
should be supplied in single length upto 12 metre or as desired by
Engineer-in-charge. The sheet shall be fixed using self drilling /self
tapping screws of size (5.5x 55mm) with EPDM seal or with polymer
coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I.
limpet washers or with G.I. limpet washers filled with white lead complete
upto any pitch in horizontal/ vertical or curved surfaces excluding the cost
of purlins, rafters and trusses and including cutting to size and shape
wherever required.
2237.58
1423100
636
... More
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
160.2
17141
107
... More
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
420.16
36553
87
... More
Providing 10cm. x 7.60 cm. drip course with specially moulded burnt
bricks of crushing strength not less than 35 kg/sqcm and water absorption
not more than 20% at junction of roof and walls in cement mortar 1:4 (1
cement 4 fine sand)
156.8
10819
69
... More
Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks)
confirming to IS:12894-2002 of class designation 4.0 in superstructure
above plinth level upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand)
16.38
6257
382
... More
Extra for lining over plaster to imitate stone or concrete block walling.
460.92
10831
23.5
... More
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work.
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm
nominal size).Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and
plinth:
7.95
33155
4170.5
... More
Painting on new work (two or more coats) to give an even shade with: Aluminium paint
1619.87
94762
58.5
... More
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
290.3
27433
94.5
... More
Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats)
289.2
10989
38
... More
Finishing walls with water proofing cement paint of required shade to give an even shade. On new work (Two or more coats applied @ 3.84 kg/10 sqm)
1669.46
68447
41
... More
Applying one coat of cement primer on wall surface (applied @ 0.80
litrs/10 sqm) complete.
307.21
7065
23
... More
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
2234.07
125107
56
... More
Painting on new work (two or more coats) to give an even shade with: Satin synthetic enamel paint
23.1
1270
55
... More
Wiring for light/ fan/ exhaust fan / call bell point with 1.5
sqmm FR PVC insulated stranded copper conductor
single core cable in concealed PVC conduit, with 5 amp
modular switch, modular base and cover plate, suitable
size G.I. box and earthing the point with same size cable
as required. Short Point
27
7506
278
... More
Medium point
31
13361
431
... More
Long point
20
11900
595
... More
Extra for providing and fixing light plug point on board in
concealed PVC conduit point wiring with modular type 3
pin 5 amp socket outlet and 5 amp switch including cost
of base and cover plate and G. I. box etc. as required.
27
6480
240
... More
Wiring for light plug point with 2x2.5 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 6 Amp switch and 3
pin 6 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required. Long Point
4
3952
988
... More
Extra Long Point I
4
5540
1385
... More
Extra Long Point II
8
14304
1788
... More
Wiring for power plug point with 2x4 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 16 Amp switch and
6 pin 16 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required. Long Point
16
21552
1347
... More
Long point
4
7328
1832
... More
Wiring for circuit / sub main wiring allong witrh earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in concealed steel conduit as required. 3x2.5 sq. mm in 20 mm conduit
550
57200
104
... More
6x2.5 sq. mm in 20 mm conduit.
160
27520
172
... More
Providing and fixing round/ hexagonal fan box (125 mm. dia) depth 75mm. (max) with 12 mm. dia steel bar hook, 1.6 mm. thiuck MS sheet cover, in RCC slab etc. as required
14
595
42.5
... More
Supplying and fixing following rating, 240 volts TWO POLE ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.
4
1084
271
... More
Supplying and fixing DP MCB, 240 volts, 'D' curve,
suitable for inductive/ motor load in the existing MCB DB
complete with connections, testing and commissioning
etc. as required.6 amps. to 32 amps
28
12768
456
... More
Fan regulator (two module size) electronic stepped type
moving all rounds
14
2842
203
... More
Batten/ angle holder
58
2378
41
... More
Ceiling rose 3 pin 5 amp
58
2088
36
... More
Earhting with copper earth plate 600 mm X 600 mm X 3 mm thkick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe.
3
20262
6754
... More
Supplying and laying 8 SWG copper wire at 0.50 meter below ground level for conductor earth electrode, i/c solding etc. as required.
24
1824
76
... More
Supplying, instaling, testing and commissioning of following sizes ceiling fan with resistance type regulqator, i/c wiring the down fods of standard length up to 30 cm. with 1.5 sq. mm. FR PVC insulated, copper conductor, sinle core cable, earthing etc. complete as required. 1200 mm. sweep
11
16533
1503
... More
Supplying, installation, testing and commissioning of
following T-5 fluorescent fitting (luminaries) complete with
electronic ballast but without fluorescent lamp, on ceiling/
wall surface, earthing the fitting etc. as required. Single box type with decorative end caps
40
25400
635
... More
Supplying, fixing, testing and commissioning of following
230/250 volts fluorescent lamp (tube) in existing lighting
luminaries as required. 4' x 36/40 watt
40
2040
51
... More
Providing and fixing composite unit for computer points
having modular type 1 No 6 pin 16 amp socket outlet, 1
No 16 amp switch, 3 Nos 3 pin 6 amp socket outlets, 3
Nos 6 amp switches, suitable G.I. box, base and cover
plates, earthing the sockets and switch box including etc.
as required.
12
10548
879
... More
Supplying, installation, testing and commissioning of
following 230/250 volts LED street light fitting with all
accessories like driver, heat sink made of die cast
aluminium with IP 66 protection and 5 KV surge
protection on pole bracket complete as required and
furnishing 2 Yrs Guarantee certificate from manufacturer. 40-45 watt
8
76272
9534
... More
Supplying and fixing on surface/ recess following way,
240 volts SP&N MCB distribution board of sheet steel
phosphatized and powder painted complete with tinned
copper busbar, neutral busbar, earth bar, din bar,
detachable gland plate, including interconnections,
earthing etc. as required. (But without
MCB/RCCB/Isolator) 8 way, Single door
3
2208
736
... More
Supplying and laying following sizes one number PVC
insulated/ XLPE, PVC sheathed, steel armoured,
aluminium conductor power cable of 1.1 KV grade on
surface/ existing cable tray with 1 mm thick GI saddle as
required. 3 x 10 sq. mm
250
32000
128
... More
Exvavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
379.3
70170
185
... More
1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm. Nominal size)
31.75
84423
2659
... More
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete. a) Thrermo-mechanically
11627.3
633687
54.5
... More
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :-(A) Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.
379.3
52722
139
... More
(b) Columns-rectangular or square in shape.
(i) Up to 4m height
423.48
125773
297
... More
Window sill,anchore string course bend coping bed plate and like(i) Up to 4.00 M. height from P.L.
134.68
24781
184
... More
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. (a) 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
123.11
512506
4163
... More
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
28.98
123469
4260.5
... More
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Sand)
19.03
62094
3263
... More
(B) Extra for brick work In S/S above plinth & up to floor five level.
153.74
520256
3384
... More
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
1346.8
144107
107
... More
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
(a) In Angle-iron frames
949.5
69788
73.5
... More
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
20.61
1793
87
... More
Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
1346.8
123232
91.5
... More
Filling from available stuff (Excluding rock) in trenches, plinth, sides of foundation etc in layers not exceeding 20cm. in depth consolidating each deposited layer by ramming and watering with a lead up to 50M. and lift up to 1.5M.
379.8
24687
65
... More
Extra for lining over plaster to imitate stone or concrete block walling.
540.77
12708
23.5
... More
Providing and fixing concertina coil fencing with required dia 610 mm
(having 50 nos. round per 6 metre length) up to 3m height of wall with
existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart tied with G.I.
staples and G.I. clips to retain horizontal including necessary bolts or G.I.
barbed wire tied to angle iron all complete as per direction of Engineer-incharge
with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick)
wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick)
and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid
separately)
518
84952
164
... More
Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
2312.38
129493
56
... More
Providing and fixing in position door shutter made of square/ rectangular
hollow steel tube of approved size joint mitred, welded frame with two
Nos. intermediate rails, 200mm wide lock rail made of 1.6mm thick M.S.
sheet welded to intermediate rail, M.S. grill of approved pattern made of
M.S. flat or square or round bars welded to frames and provided M.S. butt hinges, all necessary fitting and finished by filling putty including applying a priming coat of red oxide zinc chromate primer all complete. (To be used in safety door shutters in buildings)
541
50583
93.5
... More
Excavation for Structures (Earth work in excavation of foundation
of structures as per drawing and technical specification, including
setting out, construction of shoring and bracing, removal of stumps
and other deleterious matter, dressing of sides and bottom and
backfilling with approved material.) Ordinary soil Up to 3 m depth
37.26
5439
146
... More
Construction of RCC open drain 0.60m x 0.60m inside dimension lined with 120 mm thick RCC M-20 walls, 120 mm thick CC M-20 foundation, over 100 mm thick (Av) leveling course in PCC M-15 including excavation , dressing of sides and bottom, provision of HYSD reinforcement consisting 8 mm dia horizontal bars @ 150 mm c/c and L-shaped 8 mm dia vertical bars @ 150 mm c/c (L= 800 mm) including cutting , bending and binding wire,
placing in position , providing shuttering and concreting by using
concrete mixer, compaction by vibration etc complete as per
drawings and technical specifications.
150
388800
2592
... More
Compacting Original Ground supporting embankment
Loosening, leveling and compacting original ground to facilitate placement of first layer of embankment, scarified to a depth of 150mm, mixed with water at O.M.C. and then compacted by rolling so as to achieve minimum dry density as given in table 300-2 for embankment construction.
669.45
18744
28
... More
Construction of sub-grade with Material Obtained from
Borrow Pits/Borrow Area (Construction of sub-grade with
approved material/selected soil having C.B.R.8 (unless specified
otherwise in the contract) obtained from borrow pits with all lifts
and leads, transporting to site, spreading, grading to required slope
and compacting to meet requirement of table 300-2)
1745
436250
250
... More
Plain cement concrete complete as per drawing and Technical. PCC Grade M 15
7.16
26978
3768
... More
PCC Grade M 20
26.14
109108
4174
... More
Providing and laying Reinforced Cement Concrete pipe NP 3 / prestressed concrete pipe. (Laying Reinforced cement concrete pipe NP3 /prestressed concrete pipe for culverts including fixing collar with cement mortar 1:2 but excluding bedding below pipes, excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . )450mm dia
40
70760
1769
... More
600 mm dia
12.5
30737
2459
... More
Granular Sub-base as per Table:- 400-1
Construction o granular sub base by providing close graded Mareial, , Carriage of mixed Material to work site spreading in uniform layers with motor grader on on perpared surface watering , rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401(part-II) and suitably sprinkling arrangement as per clause 401 but excluding scarifying existing bituminous surface.(A) By Mix in Place method. Disintegrated rock i.e moorum having CBB value not less than 20 and P.I. and L.L. not more than 6 and 20 respectively .
1337.7
615342
460
... More
Wet Mix Macadam (Providing, laying, spreading and compacting
graded stone aggregate to wet mix macadam specification including
premixing the Material with water at OMC in mechanical mix plant
carriage of mixed Material by tipper to site, laying in uniform layers
with paver in sub- base / base course on well prepared surface and
compacting with vibratory roller to achieve the desired density as per
clause 406.)
901.14
1292234
1434
... More
Dry Lean Cement Concrete Sub-base as per IRC:SP-49
(Construction of dry lean cement concrete Sub-base over a prepared
sub-grade with coarse and fine aggregate conforming to IS: 383, the
size of coarse aggregate not exceeding 26.5 mm, aggregate cement
ratio not to exceed 15:1, aggregate gradation after blending to be as
per table 600-1, cement content not to be less than 150 kg/cum,
optimum moisture content to be determined during trial length
construction, concrete strength not to be less than 10 Mpa at 7 days,
mixed in a batching plant, transported to site, laid with a paver with
electronic sensor, compacting with 8-10 tonnes vibratory roller,
finishing and curing as per clause 601.)
378.6
882895
2332
... More
Cement Concrete Pavement (Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base, coarse and fine aggregate conforming to IS:383, and graded as per table 600-3, mixed as per approved mix design at site, laid, spread, vibrated, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, de-bonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing as per clause 602.)
(a) With Cement concrete grade M-40 and minimum cement content @ 400 kg/cum.
757.2
3564897
4708
... More
Excavation in Soil (by Manual Means.) Excavation for roadway in soil using including loading in tipper for carrying of cut earth to embankment site and unloading with all liftsand lead upto1000 meters as per relevant clauses of section 300. (a) Ordinari Soil
892.6
124964
140
... More
Excavation for all types and sizes of foundations, trenches and drains or
for any other purpose including disposal of excavated stuff upto 1.5 m lift
and lead upto 50m (at least 5m away from the excavated area), including
dressing and leveling of pits.In all types of soils.
1336.37
247228
185
... More
Carriage by mechanical transport upto 5 km lead: Earth
1336.37
148337
111
... More
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm
nominal size).
55.13
132808
2409
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm
nominal size).
324.62
863164
2659
... More
Boring, providing and installing cast in situ single under reamed piles of
specified diameter and length below pile cap in cement concrete 1:1½:3
(1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal
size), to carry a safe working load, excluding the cost of steel
reinforcement but including the cost of boring with auger by manual
means and making one bulb using suitable bulb enlarging tool by
MANUAL MEANS with all instruments and arrangements required for
boring true to vertical line etc. all complete. (Length of pile for payment
shall be measured upto to the bottom of pile cap): 300 mm dia piles
198
153648
776
... More
Providing and placing in position reinforcement for R.C.C. work including
straightening, cutting, bending, binding etc. complete as per drawings
including cost of binding wire in foundation and plinth all complete: Thermo-Mechanically treated bars FE 415
37934.91
2067452
54.5
... More
Providing and laying machanically mixed reinforced cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm
nominal size).
322.8
1343816
4163
... More
Up to 4.00 m Above Plinth
70.32
299598
4260.5
... More
Above 4.00 upto 8.00 m Above
35.59
155101
4358
... More
Above 8.00 upto 12.00 m Above
0.56
2495
4455.5
... More
Extra for precast PCC/ RCC work of any mix including form work, hoisting and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but excluding reinforcement.
0.71
3288
4632
... More
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :- (a) Foundations, footing, base of columns and plinth beam in any shape and size.
799.28
111099
139
... More
Window sills, anchor blocks, string course, bends, copings, bed plates and
like.
9.01
1657
184
... More
Above 6.00 M. to 7.00 M.
1.35
357
265
... More
Above 7.00 M. to 8.00 M.
2.11
643
305
... More
Above 8.00 M. to 9.00 M.
2.11
730
346
... More
Above 9.00 M. to 10.00 M.
2.27
876
386
... More
Beams, lintel, cantilevers & walls.
29.28
5914
202
... More
Spiral / folded plate type stair cases including risers and landings
19.06
5851
307
... More
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
106.74
25083
235
... More
Edge of slab breaks in floorand wall up to 200mm
69.62
2367
34
... More
Beams, lintel, cantilevers & walls.Up to 4.00 M. height from P.L.
160.32
32384
202
... More
Above 5.00 M. to6.00 m
53.17
15047
283
... More
Columns-rectangular or square in shape.
(i) Up to 4m height
1130.31
335702
297
... More
Above 4.00 M. to 5.00 M.
91.04
30726
337.5
... More
Above 5.00 M. to 6.00 M.
64.82
24501
378
... More
Above 6.00 M. to 7.00 M.
20.38
8529
418.5
... More
Above 7.00 M. to 8.00 M.
10.56
4847
459
... More
Above 8.00 M. to 9.00 M.
2.8
1398
499.5
... More
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in:Cement Mortar 1:6 (1 Cement : 6 Sand)
172.74
563650
3263
... More
Extra for brick work In S/S above plinth & up to floor five level.
257.49
871352
3384
... More
Extra for brick work In S/S above 4.00 m & upto 8.00 M
159.18
557925
3505
... More
Extra for brick work In S/S above 8.00 m & upto 12.00 M
76.31
276700
3626
... More
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including formwork.
3.88
16435
4237
... More
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
5477.87
2032289
371
... More
Cement concrete flooring with cement concrete 1:2:4 concrete (1 cement : 2 course sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50mm thick
469.62
119283
254
... More
75mm thick
1769.94
610629
345
... More
Extra for providing & fixing 4 mm. Thick glass strips in joints of Terrazzo floor/ cement concrete floor & or like.60 mm. Wide
2454.91
61372
25
... More
40 mm. wide
939.24
16906
18
... More
Providing 10cm. x 7.60 cm. drip course with specially moulded burnt
bricks of crushing strength not less than 35 kg/sqcm and water absorption
not more than 20% at junction of roof and walls in cement mortar 1:4 (1
cement 4 fine sand)
44.64
2131
47.75
... More
Providing and fixing float glass panes with steel glazing clips and special metal sash putty of approved make in steel doors, windows, ventilators. 4 mm. Thick
52.02
27830
535
... More
Supplying and fixing rolling shutter of approved makes made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft, with brackets, side guides and arrangements for inside and out side locking with push and pull arrangement complete but excluding the cost of top cover and spring.80 x 1.25 mm. M.S. laths
38.06
64359
1691
... More
Extra for providing grilled rolling shutter manufactured out of 8 mm dia.
M.S. bar instead of laths as per approved design (area of grill provided,
only to be measured).
38.06
64359
1691
... More
Providing and fixing 27.5cm. long wire spring for rolling shutters.
16
5792
362
... More
Providing and fixing M.S. sheet top cover for rolling shutter.0.90 mm. thick
21.42
8546
399
... More
Providing andfixing ball bearing for rolling shutters.
16
6768
423
... More
Providing and fixing factory made ISI marks steel doors, windows and
ventilators side/ top/ centre hung made up of standard rolled steel section
conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints
mitred and flash butt and sash bars tenoned and riveted/ welded with 10
cm long lugs of size 15x3mm embedded in cement concrete block
15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone
aggregate 20 mm nominal size) or rawl plugs and screws or with bolts
and nuts as required including providing and fixing of hinges, pivots,
handles, pegs, stays, rolling devices, locking arrangements, spring catch
etc., as required complete including applying a priming coat of red oxide
zinc chromate primer.
1235.58
108731
88
... More
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
870.13
58733
67.5
... More
Providing and fixing GI wire gauge of average width of aperture 1.56mm
with wire of 0.45mm to existing steel door, window shutter frames with
necessary M.S. strip beading etc. complete.
40.23
22890
569
... More
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.In Angle-iron frames
531.35
39054
73.5
... More
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. (A) 30 mm. thick (single leaf)
19.14
35064
1832
... More
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. (a) 300mm
10
2380
238
... More
Providing and fixing stainless steel door latch with 12mm rod, 2.5mm thick flap, necessary stainless steel screws etc complete. 150 x10mm
5
425
85
... More
Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. (a) 150 x10mm
10
705
70.5
... More
Providing and fixing stainless steel door handles having flap thickness 2.5mm, stainless steel screws etc complete.necessary (a) 150 mm
10
245
24.5
... More
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. (a) Single
5
235
47
... More
Providing and fixing stainless steel piano hinges with necessary stainless
steel screws etc complete. Overall width 25 mm
20
2460
123
... More
Steel work in tubular structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer.Electric resistance or induction butt welded tubes Grade-300. Upto 5.00 M. height.
3204.12
299585
93.5
... More
Above 5.00 M. height.
22243.8
2139853
96.2
... More
Supply and fixing of precoated galvanized iron profile sheets (size, shape
and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/-
5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in
240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet
and polyester top coat 15-18 microns. Sheet should have protective guard
film of 25 microns minimum to avoid scratches while transportation and
should be supplied in single length upto 12 metre or as desired by
Engineer-in-charge. The sheet shall be fixed using self drilling /self
tapping screws of size (5.5x 55mm) with EPDM seal or with polymer
coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I.
limpet washers or with G.I. limpet washers filled with white lead complete
upto any pitch in horizontal/ vertical or curved surfaces excluding the cost
of purlins, rafters and trusses and including cutting to size and shape
wherever required.
2279.58
1449812
636
... More
Providing and fixing steel door made of angle iron of suitable sizes with
M.S. grill of approved pattern made of M.S. flats or square or round bars
coat of red oxide zinc chromate primer.
920
73140
79.5
... More
Providing ridges or hips of 60cm overall width in plain G.I. sheet fixed with
galvanized washers J or L hooks, bolts and nuts 8mm G.I. limpet and
bitumen washers complete.
83.7
52228
624
... More
Extra for providing and fixing wind ties of 40 x 6 mm flat iron section.
630.5
74399
118
... More
Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
3607.6
330095
91.5
... More
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work.
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm
nominal size).
9.23
38489
4170
... More
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
150.87
16143
107
... More
Applying priming coat on steel work with red oxide zinc chromate primer.
102.56
1794
17.5
... More
Painting on new work (two or more coats) to give an even shade with: Satin synthetic enamel paint
1598.13
93490
58.5
... More
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
675.66
58782
87
... More
Providing and making moulded mortar band in cement mortar 1:4 (1
cement : 4 fine sand) per cm width: 18 mm thick
78.76
441
5.6
... More
Extra for lining over plaster to imitate stone or concrete block walling
374.6
8803
23.5
... More
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.Size up to 200x300mm
39.73
23321
587
... More
Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
9.81
6788
692
... More
Providing and laying vitrified floor tiles with soluble salt printing, of size
600x600mm with water absorption less than 0.5% and conforming to IS
: 15622 of approved make, laid on 20mm thick cement mortar 1:4 (1
cement : 4 coarse sand) including grouting the joints with white cement
and matching pigments etc. complete.
69.81
80351
1151
... More
Applying one coat of cement primer on wall surface (applied @ 0.80
litrs/10 sqm) complete.
1671.27
38439
23
... More
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
425.14
40175
94.5
... More
Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats)
425.14
16155
38
... More
Applying one coat of cement primer on wall surface (applied @ 0.80
litrs/10 sqm) complete.
1956.56
45000
23
... More
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
1956.56
109567
56
... More
Providing and fixing aluminium work for doors, windows, ventilators and
partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in wall/
floor with fixing clips or hold fasteners or bolts and nuts as required
aluminium sections shall be anodized transparent or dyed to approved
shade according to IS: 1868, minimum anodic coating shall be of grade
AC-15. (Glazing to be paid for separately: For fixed portion
62.04
20535
331
... More
For shutter of doors, windows & ventilators including providing and making
provision for fixing of fitting wherever required including the cost of PVC/
neoprene gasket required (Fittings shall be paid for separately).
149.64
50578
338
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading.With float glass panes of 6 mm thickness
13.65
10974
804
... More
Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area).
14160
101952
7.2
... More
Providing and fixing factory made P.V.C. door frame of size 50x47mm
with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam
sheet mitred at corners and joined with 2 Nos of 150mm long brackets of
15x15mm M.S. square tube, the vertical door profiles to be reinforced with
19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather
seal to be provided through out the frame. The door frame to be fixed to
the wall using M.S. screws of 65/100mm size complete as per
manufacturers specification and direction of Engineer-in-Charge.
10.5
3633
346
... More
Providing and fixing 30mm thick factory made panel PVC door shutter
consisting of frame made out of M.S. tubes of 19 gauge thickness and
size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S.
frame shall have a coat of steel primers of approved make and
manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C'
channel of size 30mm thickness, 70mm width out of which 50mm shall be
flat and 20mm shall be tapered in 45degree angle on either side forming
styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be
flat and 20mm shall be tapered in 45 degree on the inner side to form top
and bottom rail and 115mm wide PVC sheet out of which 75mm shall be
flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom
and lock rails shall be provided either side of the panel. 10mm (5mm x 2 )
thick, 20mm wide cross PVC sheet be provided as gap insert for top rail &
bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the
M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm)
thick x 15mm wide PVC sheet beading on inner side, and joined together
with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm
width is to be stuck on the interior side of the 'C' Channel using PVC
solvent adhesive etc. complete as per Manufacturer’s specification..PVC door shutter
3.36
7788
2318
... More
Excavation for all types and sizes of foundations, trenches and drains or
for any other purpose including disposal of excavated stuff upto 1.5 m lift
and lead upto 50m (at least 5m away from the excavated area), including
dressing and leveling of pits.In all types of soils.
1898.35
351194
185
... More
Carriage by mechanical transport upto 5 km lead: Earth
1898.35
210716
111
... More
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm
nominal size).
80.07
192888
2409
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm
nominal size).
477.81
1270496
2659
... More
Boring, providing and installing cast in situ single under reamed piles of
specified diameter and length below pile cap in cement concrete 1:1½:3
(1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal
size), to carry a safe working load, excluding the cost of steel
reinforcement but including the cost of boring with auger by manual
means and making one bulb using suitable bulb enlarging tool by
MANUAL MEANS with all instruments and arrangements required for
boring true to vertical line etc. all complete. (Length of pile for payment
shall be measured upto to the bottom of pile cap): 300 mm dia piles
297
230472
776
... More
Providing and placing in position reinforcement for R.C.C. work including
straightening, cutting, bending, binding etc. complete as per drawings
including cost of binding wire in foundation and plinth all complete: Thermo-Mechanically treated bars FE 415
54780.37
2985530
54.5
... More
Providing and laying machanically mixed reinforced cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm
nominal size).
461.44
1920974
4163
... More
Up to 4.00 m Above Plinth
95.47
406749
4260.5
... More
Above 4.00 upto 8.00 m Above
48.83
212801
4358
... More
Above 8.00 upto 12.00 m Above
0.6
2673
4455.5
... More
Extra for precast PCC/ RCC work of any mix including form work, hoisting and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but excluding reinforcement.
1.06
4909
4632
... More
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :- (a) Foundations, footing, base of columns and plinth beam in any shape and size.
1148.97
159706
139
... More
Window sills, anchor blocks, string course, bends, copings, bed plates and
like.
27.04
4975
184
... More
Above 6.00 M. to 7.00 M.
2.7
715
265
... More
Above 7.00 M. to 8.00 M.
4.22
1287
305
... More
Above 8.00 M. to 9.00 M.
4.22
1460
346
... More
Above 9.00 M. to 10.00 M.
4.54
1752
386
... More
Beams, lintel, cantilevers & walls.
46.85
9463
202
... More
Spiral / folded plate type stair cases including risers and landings
17.73
5443
307
... More
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
121.31
28507
235
... More
Edge of slab breaks in floorand wall up to 200mm
82.08
2790
34
... More
Beams, lintel, cantilevers & walls.Up to 4.00 M. height from P.L.
236.75
47823
202
... More
Above 5.00 M. to6.00 m
127.69
36136
283
... More
Columns-rectangular or square in shape.
(i) Up to 4m height
1587.65
471532
297
... More
Above 4.00 M. to 5.00 M.
131.52
44388
337.5
... More
Above 5.00 M. to 6.00 M.
91.61
34628
378
... More
Above 6.00 M. to 7.00 M.
27.48
11500
418.5
... More
Above 7.00 M. to 8.00 M.
14.24
6536
459
... More
Above 8.00 M. to 9.00 M.
4.2
2097
499.5
... More
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in:Cement Mortar 1:6 (1 Cement : 6 Sand)
247.58
807853
3263
... More
Extra for brick work In S/S above plinth & up to floor five level.
374.43
1267071
3384
... More
Extra for brick work In S/S above 4.00 m & upto 8.00 M
226.81
794969
3505
... More
Extra for brick work In S/S above 8.00 m & upto 12.00 M
85.19
308898
3626
... More
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including formwork.
5.4
22879
4237
... More
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
7687.18
2851943
371
... More
Cement concrete flooring with cement concrete 1:2:4 concrete (1 cement : 2 course sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50mm thick
671.66
170601
254
... More
75mm thick
2654.91
915943
345
... More
Extra for providing & fixing 4 mm. Thick glass strips in joints of Terrazzo floor/ cement concrete floor & or like.60 mm. Wide
3982.37
99559
25
... More
40 mm. wide
1343.32
24179
18
... More
Providing 10cm. x 7.60 cm. drip course with specially moulded burnt
bricks of crushing strength not less than 35 kg/sqcm and water absorption
not more than 20% at junction of roof and walls in cement mortar 1:4 (1
cement 4 fine sand)
66.96
3197
47.75
... More
Providing and fixing float glass panes with steel glazing clips and special metal sash putty of approved make in steel doors, windows, ventilators. 4 mm. Thick
71.84
38434
535
... More
Supplying and fixing rolling shutter of approved makes made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft, with brackets, side guides and arrangements for inside and out side locking with push and pull arrangement complete but excluding the cost of top cover and spring.80 x 1.25 mm. M.S. laths
57.1
96556
1691
... More
Extra for providing grilled rolling shutter manufactured out of 8 mm dia.
M.S. bar instead of laths as per approved design (area of grill provided,
only to be measured).
57.1
96556
1691
... More
Providing and fixing 27.5cm. long wire spring for rolling shutters.
48
17376
362
... More
Providing and fixing M.S. sheet top cover for rolling shutter.0.90 mm. thick
64.26
25639
399
... More
Providing andfixing ball bearing for rolling shutters.
48
20304
423
... More
Providing and fixing factory made ISI marks steel doors, windows and
ventilators side/ top/ centre hung made up of standard rolled steel section
conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints
mitred and flash butt and sash bars tenoned and riveted/ welded with 10
cm long lugs of size 15x3mm embedded in cement concrete block
15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone
aggregate 20 mm nominal size) or rawl plugs and screws or with bolts
and nuts as required including providing and fixing of hinges, pivots,
handles, pegs, stays, rolling devices, locking arrangements, spring catch
etc., as required complete including applying a priming coat of red oxide
zinc chromate primer.
1795.51
158004
88
... More
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
1233.89
83287
67.5
... More
Providing and fixing GI wire gauge of average width of aperture 1.56mm
with wire of 0.45mm to existing steel door, window shutter frames with
necessary M.S. strip beading etc. complete.
61.07
34748
569
... More
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.In Angle-iron frames
531.35
39054
73.5
... More
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. (A) 30 mm. thick (single leaf)
19.14
35064
1832
... More
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. (a) 300mm
10
2380
238
... More
Providing and fixing stainless steel door latch with 12mm rod, 2.5mm thick flap, necessary stainless steel screws etc complete. 150 x10mm
5
425
85
... More
Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. (a) 150 x10mm
10
705
70.5
... More
Providing and fixing stainless steel door handles having flap thickness 2.5mm, stainless steel screws etc complete.necessary (a) 150 mm
10
245
24.5
... More
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. (a) Single
5
235
47
... More
Providing and fixing stainless steel piano hinges with necessary stainless
steel screws etc complete. Overall width 25 mm
20
2460
123
... More
Steel work in tubular structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer.Electric resistance or induction butt welded tubes Grade-300. Upto 5.00 M. height.
4352.22
406932
93.5
... More
Above 5.00 M. height.
33060.4
3180410
96.2
... More
Providing and fixing steel door made of angle iron of suitable sizes with
M.S. grill of approved pattern made of M.S. flats or square or round bars
coat of red oxide zinc chromate primer.
1380
109710
79.5
... More
Supply and fixing of precoated galvanized iron profile sheets (size, shape
and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/-
5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in
240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet
and polyester top coat 15-18 microns. Sheet should have protective guard
film of 25 microns minimum to avoid scratches while transportation and
should be supplied in single length upto 12 metre or as desired by
Engineer-in-charge. The sheet shall be fixed using self drilling /self
tapping screws of size (5.5x 55mm) with EPDM seal or with polymer
coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I.
limpet washers or with G.I. limpet washers filled with white lead complete
upto any pitch in horizontal/ vertical or curved surfaces excluding the cost
of purlins, rafters and trusses and including cutting to size and shape
wherever required.
3447.27
2192463
636
... More
Providing ridges or hips of 60cm overall width in plain G.I. sheet fixed with
galvanized washers J or L hooks, bolts and nuts 8mm G.I. limpet and
bitumen washers complete.
125.55
78343
624
... More
Extra for providing and fixing wind ties of 40 x 6 mm flat iron section.
922.65
108872
118
... More
Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
5038.77
461047
91.5
... More
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work.
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm
nominal size).
13.19
53722
4073
... More
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
150.87
16143
107
... More
Applying priming coat on steel work with red oxide zinc chromate primer.
415.62
7273
17.5
... More
Painting on new work (two or more coats) to give an even shade with: Satin synthetic enamel paint
2352.37
137613
58.5
... More
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
819.5
71296
87
... More
Providing and making moulded mortar band in cement mortar 1:4 (1
cement : 4 fine sand) per cm width: 18 mm thick
73.66
412
5.6
... More
Extra for lining over plaster to imitate stone or concrete block walling
537.62
12634
23.5
... More
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.Size up to 200x300mm
39.73
23321
587
... More
Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
9.81
6788
692
... More
Providing and laying vitrified floor tiles with soluble salt printing, of size
600x600mm with water absorption less than 0.5% and conforming to IS
: 15622 of approved make, laid on 20mm thick cement mortar 1:4 (1
cement : 4 coarse sand) including grouting the joints with white cement
and matching pigments etc. complete.
69.81
80351
1151
... More
Applying one coat of cement primer on wall surface (applied @ 0.80
litrs/10 sqm) complete.
1671.27
38439
23
... More
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
425.14
40175
94.5
... More
Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats)
425.14
16155
38
... More
Applying one coat of cement primer on wall surface (applied @ 0.80
litrs/10 sqm) complete.
2865.08
65896
23
... More
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
2865.08
160444
56
... More
Providing and fixing aluminium work for doors, windows, ventilators and
partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in wall/
floor with fixing clips or hold fasteners or bolts and nuts as required
aluminium sections shall be anodized transparent or dyed to approved
shade according to IS: 1868, minimum anodic coating shall be of grade
AC-15. (Glazing to be paid for separately: For fixed portion
62.04
20535
331
... More
For shutter of doors, windows & ventilators including providing and making
provision for fixing of fitting wherever required including the cost of PVC/
neoprene gasket required (Fittings shall be paid for separately).
149.64
50578
338
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading.With float glass panes of 6 mm thickness
13.65
10974
804
... More
Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area).
22200
159840
7.2
... More
Providing and fixing factory made P.V.C. door frame of size 50x47mm
with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam
sheet mitred at corners and joined with 2 Nos of 150mm long brackets of
15x15mm M.S. square tube, the vertical door profiles to be reinforced with
19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather
seal to be provided through out the frame. The door frame to be fixed to
the wall using M.S. screws of 65/100mm size complete as per
manufacturers specification and direction of Engineer-in-Charge.
10.5
3633
346
... More
Providing and fixing 30mm thick factory made panel PVC door shutter
consisting of frame made out of M.S. tubes of 19 gauge thickness and
size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S.
frame shall have a coat of steel primers of approved make and
manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C'
channel of size 30mm thickness, 70mm width out of which 50mm shall be
flat and 20mm shall be tapered in 45degree angle on either side forming
styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be
flat and 20mm shall be tapered in 45 degree on the inner side to form top
and bottom rail and 115mm wide PVC sheet out of which 75mm shall be
flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom
and lock rails shall be provided either side of the panel. 10mm (5mm x 2 )
thick, 20mm wide cross PVC sheet be provided as gap insert for top rail &
bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the
M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm)
thick x 15mm wide PVC sheet beading on inner side, and joined together
with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm
width is to be stuck on the interior side of the 'C' Channel using PVC
solvent adhesive etc. complete as per Manufacturer’s specification..PVC door shutter
3.36
7788
2318
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ),
100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing
cistern (same colour) conforming to IS : 7231, with flush bend and
other fittings and fixtures complete including cutting and making good
the walls and floors wherever required : White Long pattern W.C. pan of size 580 mm
5
12295
2459
... More
Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :
White Size 550x450 mm
6
8580
1430
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and
making good the walls wherever required :
345x445 mm bowl depth 200 mm.
2
12596
6298
... More
Providing and fixing white vitreous china urinal basin with waste fitting
as per IS : 2556, and other couplings in C.P. brass complete:
Flat back type urinal of size 460x380x250mm
3
4587
1529
... More
Providing and fixing vitreous china water closet (European type W.C.
pan) with white ISI marked plastic seat and lid, 10 litre low level white
P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the
walls and floors wherever required : White pedestal type
1
2882
2882
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia
12
822
68.5
... More
Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats
including S.W. drain pipe 100 mm diameter and 1.20 m long complete as
per standard design.
4
6836
1709
... More
Providing and fixing on wall face or under floor UV stabilized
Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete.
75 mm dia pipe.
60
10920
182
... More
110 mm dia pipe.
70
18690
267
... More
Providing and fixing on wall face UV stabilized Unplasticised - PVC
moulded fittings/ accessories having 3.2mm wall thickness for Rigid
PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring
conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm
18
2772
154
... More
(d) Vent covel 75 mm
4
136
34
... More
(e) Nahani trap 110x75mm
10
905
90.5
... More
(f) Plain reducing Tee 110x75mm
15
1935
129
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :
10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes
including bed concrete 150mm thick as per standard design:
100 mm diameter S.W. pipe
109
38913
357
... More
Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160
mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand)
12 mm thick finished with a floating coat of neat cement complete as per
standard design :
6
27864
4644
... More
Providing and fixing UV stabilized Unplasticised -PVC pipe clips of
approved design to Rigid PVC pipes by means of 50x50x50mm hard
wood plugs, screwed with M.S. screws of required length including
cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse
sand) and making good the wall etc. complete.
75 mm
60
3420
57
... More
110 mm
70
4270
61
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing.
This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
CONCEALED WORK including cutting chases and making good the
walls etc., 15 mm nominal outer dia .Pipes
40
5320
133
... More
20 mm nominal outer dia .Pipes
110
18370
167
... More
25 mm nominal outer dia .Pipes.
160
34080
213
... More
Providing and fixing gun metal non- return valve (vertical type) of
approved quality (screwed end) : 25 mm nominal bore
11
4961
451
... More
Providing and fixing G.I. Union in G.I. pipe (New work) including cutting
and threading the pipe and making long screws etc. complete:
approved quality (screwed end) : 25 mm nominal bore
8
1568
196
... More
Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required:
Bib cock (400 grams)
18
6876
382
... More
Long nose bib cock (500 grams)
4
1820
455
... More
Stop cock (concealed) (600 grams)
18
8892
494
... More
Piller Cock (400 grams)
6
2388
398
... More
Shower rose (revolving type) (150mm)
5
1345
269
... More
Angle valve for basin mixer and geyser points (450 grams)
13
4966
382
... More
Providing and fixing stainless steel drain jali of approved make/quality.
10
510
51
... More
Providing and placing on terrace (at all floor levels) polyethylene water
storage tank ISI : 12701 marked with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank
4000
29200
7.3
... More
Providing and fixing concealed in wall G.I. pipes medium class complete
with G.I. fittings and clamps, including painting with anti corrosive
bitumastic paint, cutting chases, making good the walls etc. and testing of joints complete: 25 mm dia nominal bore
134
39798
297
... More
Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required:
Bib cock (400 grams)
10
3820
382
... More
Angle valve for basin mixer and geyser points (450 grams)
4
1528
382
... More
Long nose bib cock (500 grams)
4
1820
455
... More
Shower rose (revolving type) (150mm)
4
1076
269
... More
Stop cock (concealed) (600 grams)
20
9880
494
... More
Providing and fixing stainless steel drain jali of approved make/quality.
10
510
51
... More
Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end):
40 mm nominal bore
4
2384
596
... More
25 mm nominal bore
2
872
436
... More
Providing and fixing ball valve (brass) of approved quality, High or low
pressure, with plastic floats complete : 20 mm nominal bore
2
788
394
... More
15 mm nominal bore
2
568
284
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing.
This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
CONCEALED WORK including cutting chases and making good the
walls etc.,
25 mm nominal outer dia .Pipes.
150
31950
213
... More
20 mm nominal outer dia .Pipes
80
13360
167
... More
15 mm nominal outer dia .Pipes
20
2660
133
... More
Providing and placing on terrace (at all floor levels) polyethylene water
storage tank ISI : 12701 marked with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank
4000
29200
7.3
... More
Wiring for light/ fan/ exhaust fan / call bell point with 1.5
sqmm FR PVC insulated stranded copper conductor
single core cable in concealed PVC conduit, with 5 amp
modular switch, modular base and cover plate, suitable
size G.I. box and earthing the point with same size cable
as required. Short Point
27
7506
278
... More
Medium point
31
13361
431
... More
Long point
20
11900
595
... More
Extra for providing and fixing light plug point on board in
concealed PVC conduit point wiring with modular type 3
pin 5 amp socket outlet and 5 amp switch including cost
of base and cover plate and G. I. box etc. as required.
27
6480
240
... More
Wiring for light plug point with 2x2.5 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 6 Amp switch and 3
pin 6 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required. Long Point
4
3952
988
... More
Extra Long Point I
4
5540
1385
... More
Extra Long Point II
8
14304
1788
... More
Wiring for power plug point with 2x4 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 16 Amp switch and
6 pin 16 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required. Long Point
16
21552
1347
... More
Long point
4
7328
1832
... More
Wiring for circuit / sub main wiring allong witrh earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in concealed steel conduit as required. 3x2.5 sq. mm in 20 mm conduit
550
57200
104
... More
6x2.5 sq. mm in 20 mm conduit.
160
27520
172
... More
Providing and fixing round/ hexagonal fan box (125 mm. dia) depth 75mm. (max) with 12 mm. dia steel bar hook, 1.6 mm. thiuck MS sheet cover, in RCC slab etc. as required
14
595
42.5
... More
Supplying and fixing following rating, 240 volts TWO POLE ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.
4
1084
271
... More
Supplying and fixing DP MCB, 240 volts, 'D' curve,
suitable for inductive/ motor load in the existing MCB DB
complete with connections, testing and commissioning
etc. as required.6 amps. to 32 amps
28
12768
456
... More
Fan regulator (two module size) electronic stepped type
moving all rounds
14
2842
203
... More
Batten/ angle holder
58
2378
41
... More
Ceiling rose 3 pin 5 amp
58
2088
36
... More
Earhting with copper earth plate 600 mm X 600 mm X 3 mm thkick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe.
3
20262
6754
... More
Supplying and laying 8 SWG copper wire at 0.50 meter below ground level for conductor earth electrode, i/c solding etc. as required.
24
1824
76
... More
Supplying, instaling, testing and commissioning of following sizes ceiling fan with resistance type regulqator, i/c wiring the down fods of standard length up to 30 cm. with 1.5 sq. mm. FR PVC insulated, copper conductor, sinle core cable, earthing etc. complete as required. 1200 mm. sweep
11
16533
1503
... More
Supplying, installation, testing and commissioning of
following T-5 fluorescent fitting (luminaries) complete with
electronic ballast but without fluorescent lamp, on ceiling/
wall surface, earthing the fitting etc. as required. Single box type with decorative end caps
40
25400
635
... More
Supplying, fixing, testing and commissioning of following
230/250 volts fluorescent lamp (tube) in existing lighting
luminaries as required. 4' x 36/40 watt
40
2040
51
... More
Providing and fixing composite unit for computer points
having modular type 1 No 6 pin 16 amp socket outlet, 1
No 16 amp switch, 3 Nos 3 pin 6 amp socket outlets, 3
Nos 6 amp switches, suitable G.I. box, base and cover
plates, earthing the sockets and switch box including etc.
as required.
12
10548
879
... More
Supplying, installation, testing and commissioning of
following 230/250 volts LED street light fitting with all
accessories like driver, heat sink made of die cast
aluminium with IP 66 protection and 5 KV surge
protection on pole bracket complete as required and
furnishing 2 Yrs Guarantee certificate from manufacturer. 40-45 watt
8
76272
9534
... More
Supplying and fixing on surface/ recess following way,
240 volts SP&N MCB distribution board of sheet steel
phosphatized and powder painted complete with tinned
copper busbar, neutral busbar, earth bar, din bar,
detachable gland plate, including interconnections,
earthing etc. as required. (But without
MCB/RCCB/Isolator) 8 way, Single door
3
2208
736
... More
Supplying and laying following sizes one number PVC
insulated/ XLPE, PVC sheathed, steel armoured,
aluminium conductor power cable of 1.1 KV grade on
surface/ existing cable tray with 1 mm thick GI saddle as
required. 3 x 10 sq. mm
250
32000
128
... More
Wiring for light/ fan/ exhaust fan / call bell point with 1.5
sqmm FR PVC insulated stranded copper conductor
single core cable in concealed PVC conduit, with 5 amp
modular switch, modular base and cover plate, suitable
size G.I. box and earthing the point with same size cable
as required. Short Point
27
7506
278
... More
Medium point
35
15085
431
... More
Long point
26
15470
595
... More
Extra for providing and fixing light plug point on board in
concealed PVC conduit point wiring with modular type 3
pin 5 amp socket outlet and 5 amp switch including cost
of base and cover plate and G. I. box etc. as required.
50
12000
240
... More
Wiring for light plug point with 2x2.5 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 6 Amp switch and 3
pin 6 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required. Long Point
6
5928
988
... More
Extra Long Point I
10
13850
1385
... More
Extra Long Point II
15
26820
1788
... More
Wiring for power plug point with 2x4 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 16 Amp switch and
6 pin 16 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required. Long Point
18
24246
1347
... More
Long point
8
14656
1832
... More
Wiring for circuit / sub main wiring allong witrh earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in concealed steel conduit as required. 3x2.5 sq. mm in 20 mm conduit
750
78000
104
... More
6x2.5 sq. mm in 20 mm conduit.
210
36120
172
... More
Providing and fixing round/ hexagonal fan box (125 mm. dia) depth 75mm. (max) with 12 mm. dia steel bar hook, 1.6 mm. thiuck MS sheet cover, in RCC slab etc. as required
15
637
42.5
... More
Supplying and fixing following rating, 240 volts TWO POLE ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.
6
1626
271
... More
Supplying and fixing DP MCB, 240 volts, 'D' curve,
suitable for inductive/ motor load in the existing MCB DB
complete with connections, testing and commissioning
etc. as required.6 amps. to 32 amps
38
17328
456
... More
Fan regulator (two module size) electronic stepped type
moving all rounds
15
3045
203
... More
Batten/ angle holder
53
2173
41
... More
Ceiling rose 3 pin 5 amp
53
1908
36
... More
Earhting with copper earth plate 600 mm X 600 mm X 3 mm thkick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe.
3
20262
6754
... More
Supplying and laying 8 SWG copper wire at 0.50 meter below ground level for conductor earth electrode, i/c solding etc. as required.
24
1824
76
... More
Supplying, instaling, testing and commissioning of following sizes ceiling fan with resistance type regulqator, i/c wiring the down fods of standard length up to 30 cm. with 1.5 sq. mm. FR PVC insulated, copper conductor, sinle core cable, earthing etc. complete as required. 1200 mm. sweep
15
22545
1503
... More
Supplying, installation, testing and commissioning of
following T-5 fluorescent fitting (luminaries) complete with
electronic ballast but without fluorescent lamp, on ceiling/
wall surface, earthing the fitting etc. as required. Single box type with decorative end caps
50
31750
635
... More
Supplying, fixing, testing and commissioning of following
230/250 volts fluorescent lamp (tube) in existing lighting
luminaries as required. 4' x 36/40 watt
50
2550
51
... More
Providing and fixing composite unit for computer points
having modular type 1 No 6 pin 16 amp socket outlet, 1
No 16 amp switch, 3 Nos 3 pin 6 amp socket outlets, 3
Nos 6 amp switches, suitable G.I. box, base and cover
plates, earthing the sockets and switch box including etc.
as required.
18
15822
879
... More
Supplying, installation, testing and commissioning of
following 230/250 volts LED street light fitting with all
accessories like driver, heat sink made of die cast
aluminium with IP 66 protection and 5 KV surge
protection on pole bracket complete as required and
furnishing 2 Yrs Guarantee certificate from manufacturer. 40-45 watt
12
114408
9534
... More
Supplying and fixing on surface/ recess following way,
240 volts SP&N MCB distribution board of sheet steel
phosphatized and powder painted complete with tinned
copper busbar, neutral busbar, earth bar, din bar,
detachable gland plate, including interconnections,
earthing etc. as required. (But without
MCB/RCCB/Isolator) 8 way, Single door
4
2944
736
... More
Supplying and laying following sizes one number PVC
insulated/ XLPE, PVC sheathed, steel armoured,
aluminium conductor power cable of 1.1 KV grade on
surface/ existing cable tray with 1 mm thick GI saddle as
required. 3 x 10 sq. mm
250
32000
128
... More
Exvavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
56.11
10380
185
... More
Boring, providing and installing cast in situ single under reamed piles of
specified diameter and length below pile cap in cement concrete 1:1½:3
(1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal
size), to carry a safe working load, excluding the cost of steel
reinforcement but including the cost of boring with auger by manual
means and making one bulb using suitable bulb enlarging tool by
MANUAL MEANS with all instruments and arrangements required for
boring true to vertical line etc. all complete. (Length of pile for payment
shall be measured upto to the bottom of pile cap): 300 mm dia piles
34.1
26461
776
... More
1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm. Nominal size)
10.57
28105
2659
... More
Providing and laying precast cement concrete block in masonry work with
precast blocks having crushing strength 75 kg/sqcm in cement mortar
1:6(1 Cement :6 coarse sand ) .(To be used in boundary wall and plaster
shall not be done.)
21.54
100807
4680
... More
Extra for brick work in superstructure above plinth level for every floor or
part thereof in addition to rate for foundation and plinth:
26.27
126122
4801
... More
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including formwork.
0.39
1652
4237
... More
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete. a) Thrermo-mechanically
2338.96
127473
54.5
... More
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. (a) 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
3.79
15777
4163
... More
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
12.45
53043
4260.5
... More
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :-(A) Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.
44.53
6189
139
... More
(b) Columns-rectangular or square in shape.
(i) Up to 4m height
55.68
16536
297
... More
(C) Beams, lintel, cantilevers & walls.(i) Up to 4.00 M. height from P.L.
18.64
3765
202
... More
(D) weather shade chhajja cornies and moulding.
6.77
1990
294
... More
(E) Suspended floor roof access plate form balconies (plain surface)and shelves (cast in situ)
52
12220
235
... More
(F) Edge of slab breaks in floorand wall up to 200mm
51.95
1766
34
... More
Stair cases of all types excluding spiral and folded plate type, including risers and landings.Up to 4.00 M. height from P.L.
9.46
2175
230
... More
(C) Window sill,anchore string course bend coping bed plate and like (i) Up to 4.00 M. height from P.L.
7.46
1372
184
... More
(G) Stair cases of all types excluding spiral and folded plate type, including risers and landings
(a) Up to 4.00 M. height from P.L.
41.71
2711
65
... More
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
51.1
18958
371
... More
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
(a) In Angle-iron frames
91.95
6758
73.5
... More
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
207.12
13980
67.5
... More
Providing and fixing float glass panes with steel glazing clips and special
metal sash putty of approved make in steel doors, windows, ventilators: 4 mm. Thick
1.44
770
535
... More
Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm) finished with a floating
coat of neat cement.50mm thick
21.16
5374
254
... More
Extra for providing and fixing 4mm thick glass strip in joints of Terrazo
floor/ cement concrete floor or like. 40 mm wide
44.4
799
18
... More
Providing and laying ceramic glazed floor tiles conforming to IS : 15622
of approved size, make, colour, shade laid on 20 mm thick Cement
Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
3.68
2546
692
... More
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622
of approved make, colours, shades and size on wall and dados over 12
mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with matching pigment complete. Size upto 200x300mm
18.01
10571
587
... More
Providing and laying vitrified floor tiles with double charge/ multi charge
printing with water absorption less than 0.5% and conforming to IS :
15622 of approved make in all colours and shades and size mentioned
below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints with white cement and
matching pigments etc. complete. Size 600x600mm
36.64
42172
1151
... More
25mm thick Local RAJIM/ Red Flag stone slab flooring laid over 20mm
(Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand)
laid over & jointed with grey cement slurry mixed with pigments to
match the shade of the stone i/c grinding, rubbing and polishing.
1.38
712
516
... More
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I),
decorative type core of block board construction with frame of first class
hard wood and well matched teak ply veneering with vertical grains or
cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
10.4
19052
1832
... More
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm
4
912
228
... More
Providing and fixing stainless steel tower bolts (Barrel type) with
necessary stainless steel screws etc complete. 200 x10mm
4
282
70.5
... More
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work.
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm
nominal size).Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and
plinth:
0.63
2627
4170.5
... More
Providing and fixing stainless steel door handles having flap thickness
2.5mm, necessary stainless steel screws etc complete. 150 mm
8
196
24.5
... More
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
4
188
47
... More
Providing and fixing factory made PVC door shutters of specified
thickness made of styles and rails of a UPVC hollow section of specified
size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on
both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws.24 mm thick door shutters with styles and rails of size 59x24 mm
1.68
4030
2399
... More
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work. 1: 1:5: 3 (1 cement : 1:3 coarse sand : 3 graded stone aggregate 40mm
nominal size).
1.59
5647
3552
... More
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
210.58
19268
91.5
... More
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
259.17
27731
107
... More
Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand)
79.14
6885
87
... More
Extra for lining over plaster to imitate stone or concrete block walling.
30.62
719
23.5
... More
Neat cement punning.
42.03
1386
33
... More
Distempering with acrylic washable distemper to give an even shade.On new work (Two or more coats)
193.47
7351
38
... More
Applying one coat of cement primer on wall surface (applied @ 0.80
litrs/10 sqm) complete.
181.16
4166
23
... More
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with: On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
175.51
9828
56
... More
Providing and fixing aluminium work for doors, windows, ventilators and
partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in wall/
floor with fixing clips or hold fasteners or bolts and nuts as required
aluminium sections shall be anodized transparent or dyed to approved
shade according to IS: 1868, minimum anodic coating shall be of grade
AC-15. (Glazing to be paid for separately: For fixed portion
16
5296
331
... More
For shutter of doors, windows & ventilators including providing and making
provision for fixing of fitting wherever required including the cost of PVC/
neoprene gasket required (Fittings shall be paid for separately).
22
7436
338
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters
and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of
aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness
6.38
4517
708
... More
Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks)
confirming to IS:12894-2002 of class designation 4.0 in superstructure
above plinth level upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand)
3.08
1176
382
... More
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
181.16
17119
94.5
... More
Painting on new work (two or more coats) to give an even shade with: Satin synthetic enamel paint
18.67
1026
55
... More
Painting on new work (two or more coats) to give an even shade with: (a) Aluminium Paint
9.91
579
58.5
... More
Providing and fixing stainless steel door latch with 12mm rod, 2.5mm
thick flap, necessary stainless steel screws etc complete. 250mm
4
340
85
... More
Providing and fixing stainless steel piano hinges with necessary stainless
steel screws etc complete. Overall width 25 mm
12
1476
123
... More
Exvavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
23.41
4330
185
... More
Boring, providing and installing cast in situ single under reamed piles of
specified diameter and length below pile cap in cement concrete 1:1½:3
(1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal
size), to carry a safe working load, excluding the cost of steel
reinforcement but including the cost of boring with auger by manual
means and making one bulb using suitable bulb enlarging tool by
MANUAL MEANS with all instruments and arrangements required for
boring true to vertical line etc. all complete. (Length of pile for payment
shall be measured upto to the bottom of pile cap): 300 mm dia piles
49.6
38489
776
... More
1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm. Nominal size)
12.08
32120
2659
... More
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Sand)
22.58
73678
3263
... More
(B) Extra for brick work In S/S above plinth & up to floor five level.
18.17
61487
3384
... More
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete. a) Thrermo-mechanically
2311.32
125966
54.5
... More
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. (a) 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
7.6
31638
4163
... More
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
6.1
25989
4260.5
... More
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :-(A) Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.
36.38
5056
139
... More
(b) Columns-rectangular or square in shape.
(i) Up to 4m height
38.4
11404
297
... More
(C) Beams, lintel, cantilevers & walls.(i) Up to 4.00 M. height from P.L.
11.08
2238
202
... More
(E) Suspended floor roof access plate form balconies (plain surface)and shelves (cast in situ)
26.6
6251
235
... More
(F) Edge of slab breaks in floorand wall up to 200mm
30.4
1033
34
... More
Window sill,anchore string course bend coping bed plate and like(i) Up to 4.00 M. height from P.L.
3.13
575
184
... More
(G) Stair cases of all types excluding spiral and folded plate type, including risers and landings
(a) Up to 4.00 M. height from P.L.
51.06
3318
65
... More
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
39.79
14762
371
... More
Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm) finished with a floating
coat of neat cement.50mm thick
58.87
14952
254
... More
Extra for providing and fixing 4mm thick glass strip in joints of Terrazo
floor/ cement concrete floor or like. 40 mm wide
27.6
496
18
... More
Steel work in tubular structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer.Electric resistance or induction butt welded tubes Grade-300. Upto 5.00 M. height.
381.85
35702
93.5
... More
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I),
decorative type core of block board construction with frame of first class
hard wood and well matched teak ply veneering with vertical grains or
cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
3.36
6155
1832
... More
Sliding Bolt
2
456
228
... More
Providing and fixing stainless steel tower bolts (Barrel type) with
necessary stainless steel screws etc complete. 200 x10mm
2
141
70.5
... More
Providing and fixing stainless steel door handles having flap thickness
2.5mm, necessary stainless steel screws etc complete. 150 mm
4
98
24.5
... More
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
4
188
47
... More
Providing and fixing stainless steel door latch with 12mm rod, 2.5mm
thick flap, necessary stainless steel screws etc complete. 250mm
2
170
85
... More
Providing and fixing stainless steel piano hinges with necessary stainless
steel screws etc complete. Overall width 25 mm
6
738
123
... More
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
39.11
2639
67.5
... More
Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses.
38.1
13220
347
... More
Neat cement punning.
22.74
750
33
... More
Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
131.91
12069
91.5
... More
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
22.72
1976
87
... More
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
214.97
23001
107
... More
Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete.
122.58
2819
23
... More
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
113.97
10770
94.5
... More
Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats)
321.32
12210
38
... More
Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
357.21
20003
56
... More
Painting on new work (two or more coats) to give an even shade with: (a) Aluminium Paint
28.76
1682
58.5
... More
Boring, providing and installing cast in situ single under reamed piles of
specified diameter and length below pile cap in cement concrete 1:1½:3
(1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal
size), to carry a safe working load, excluding the cost of steel
reinforcement but including the cost of boring with auger by manual
means and making one bulb using suitable bulb enlarging tool by
MANUAL MEANS with all instruments and arrangements required for
boring true to vertical line etc. all complete. (Length of pile for payment
shall be measured upto to the bottom of pile cap): 300 mm dia piles
1047.8
813092
776
... More
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete. a) Thrermo-mechanically
18201.2
991965
54.5
... More
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :-(A) Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.
692.76
96293
139
... More
(b) Columns-rectangular or square in shape.
(i) Up to 4m height
460.53
136777
297
... More
Window sill,anchore string course bend coping bed plate and like(i) Up to 4.00 M. height from P.L.
195
35880
184
... More
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. (a) 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
57.25
238331
4163
... More
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
41.47
176682
4260.5
... More
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Sand)
27.6
90058
3263
... More
(B) Extra for brick work In S/S above plinth & up to floor five level.
230.46
779876
3384
... More
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
1950
208650
107
... More
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
(a) In Angle-iron frames
1350
99225
73.5
... More
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
20.61
1793
87
... More
Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
1800
164700
91.5
... More
Extra for lining over plaster to imitate stone or concrete block walling.
795.78
18700
23.5
... More
Providing and fixing in position G.I. barbed wire (93.8gram/m) to concrete/
wooden/ angle iron posts (straight or diagonal) including securing and
screwing with G.I. tying wire, G.I. stapples, G.I.U-nails or steel pins etc.,
complete(Cost of posts, struts to be paid for separately)
5250
49350
9.4
... More
Providing and fixing concertina coil fencing with required dia 610 mm
(having 50 nos. round per 6 metre length) up to 3m height of wall with
existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart tied with G.I.
staples and G.I. clips to retain horizontal including necessary bolts or G.I.
barbed wire tied to angle iron all complete as per direction of Engineer-incharge
with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick)
wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick)
and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid
separately)
750
123000
164
... More
Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
3337.82
186917
56
... More
Providing and fixing in position door shutter made of square/ rectangular
hollow steel tube of approved size joint mitred, welded frame with two
Nos. intermediate rails, 200mm wide lock rail made of 1.6mm thick M.S.
sheet welded to intermediate rail, M.S. grill of approved pattern made of
M.S. flat or square or round bars welded to frames and provided M.S. butt hinges, all necessary fitting and finished by filling putty including applying a priming coat of red oxide zinc chromate primer all complete. (To be used in safety door shutters in buildings)
541
50583
93.5
... More
Excavation in Soil (by Manual Means.) Excavation for roadway in soil using including loading in tipper for carrying of cut earth to embankment site and unloading with all liftsand lead upto1000 meters as per relevant clauses of section 300. (a) Ordinari Soil
4634.37
648811
140
... More
Transportation of metal i/c loading & unloading (a) Excavated / Compacted ordinary and other soil
4634.37
597833
129
... More
Plain cement concrete complete as per drawing and Technical
Specifications PCC Grade M 15
6.7
18686
2789
... More
PCC Grade M 20
27.14
113282
4174
... More
Providing and laying Reinforced Cement Concrete pipe NP 3 / prestressed concrete pipe. (Laying Reinforced cement concrete pipe NP3 /prestressed concrete pipe for culverts including fixing collar with cement mortar 1:2 but excluding bedding below pipes, excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . )450mm dia
21
37149
1769
... More
600mm dia
12.5
30737
2459
... More
Providing and filling in plinth with sand/ Crusher dust and hard moorum
under floor in layers not exceeding 20cm in depth consolidating each
deposited layer by ramming and watering, including dressing etc.
complete.
3382.68
1556032
460
... More
Construction of RCC open drain 0.60m x 0.60m inside dimension lined with 120 mm thick RCC M-20 walls, 120 mm thick CC M-20 foundation, over 100 mm thick (Av) leveling course in PCC M-15 including excavation , dressing of sides and bottom, provision of HYSD reinforcement consisting 8 mm dia horizontal bars @ 150 mm c/c and L-shaped 8 mm dia vertical bars @ 150 mm c/c (L= 800 mm) including cutting , bending and binding wire,
placing in position , providing shuttering and concreting by using
concrete mixer, compaction by vibration etc complete as per
drawings and technical specifications.
400
1036800
2592
... More
Construction of sub-grade with Material Obtained from
Borrow Pits/Borrow Area (Construction of sub-grade with
approved material/selected soil having C.B.R.8 (unless specified
otherwise in the contract) obtained from borrow pits with all lifts
and leads, transporting to site, spreading, grading to required slope
and compacting to meet requirement of table 300-2)
2222.32
555580
250
... More
Wet Mix Macadam (Providing, laying, spreading and compacting
graded stone aggregate to wet mix macadam specification including
premixing the Material with water at OMC in mechanical mix plant
carriage of mixed Material by tipper to site, laying in uniform layers
with paver in sub- base / base course on well prepared surface and
compacting with vibratory roller to achieve the desired density as per
clause 406.)
1651.93
2368867
1434
... More
Dry Lean Cement Concrete Sub-base as per IRC:SP-49
(Construction of dry lean cement concrete Sub-base over a prepared
sub-grade with coarse and fine aggregate conforming to IS: 383, the
size of coarse aggregate not exceeding 26.5 mm, aggregate cement
ratio not to exceed 15:1, aggregate gradation after blending to be as
per table 600-1, cement content not to be less than 150 kg/cum,
optimum moisture content to be determined during trial length
construction, concrete strength not to be less than 10 Mpa at 7 days,
mixed in a batching plant, transported to site, laid with a paver with
electronic sensor, compacting with 8-10 tonnes vibratory roller,
finishing and curing as per clause 601.)
637.32
1486230
2332
... More
Cement Concrete Pavement (Construction of un-reinforced, dowel
jointed, plain cement concrete pavement over a prepared sub-base,
coarse and fine aggregate conforming to IS:383, and graded as per
table 600-3, mixed as per approved mix design at site, laid, spread,
vibrated, compacted and finished in a continuous operation including
provision of contraction, expansion, construction and longitudinal
joints, joint filler, separation membrane, sealant primer, joint sealant,
de-bonding strip, dowel bar, tie rod, admixtures as approved, curing
compound, finishing to lines and grades as per drawing as per clause
602.) (i) With Cement concrete grade M-40 and minimum cement content @
400 kg/cum.
1276.75
6010939
4708
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements