State Warehousing Corporation Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Chhattisgarh government has posted on its website in a very hassle-free manner.
State Warehousing Corporation - CGSWC Tender
Civil And Construction
Opening Date30 Sep 2024
Closing Date21 Oct 2024
Tender Amount₹ 73,29,000
Costs
EMD
₹ 55,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
159058Tender No
159058Tender Authority
State Warehousing Corporation ViewPurchaser Address
-Website
http://http://cgswc.cg.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead.
15.62
4108
263
Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm) finished with a floating
coat of neat cement.50mm thick
1769.09
449349
254
Extra for providing and fixing 4mm thick glass strip in joints of Terrazo
floor/ cement concrete floor or like. 40 mm wide
2587.2
46570
18
Providing and fixing steel door made of angle iron of suitable sizes with M.S. grill of approved pattern made of M.S. flats or square or round bars coat of red oxide zinc chromate primer.
1364.52
108479
79.5
Providing and fixing in position welded steel wire fabric to concrete/ wooden/ angle iron posts including securing and screwing with G.I. tying wire, G.I. staples, G.I.U-nails or steel pins etc., complete Aperture 50x25mm
59.04
33594
569
Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer. Electric resistance or induction butt welded tubes Grade-300
1336.68
124980
93.5
Extra for providing and fixing wind ties of 40x6mm flat iron section
25.62
3023
118
Supply and fixing of precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
76.86
48883
636
Painting on new work (two or more coats) to give an even shade with: Satin synthetic enamel paint
112.21
6172
55
Painting on old work (one or more coats) to give an even shade with:
335
11725
35
Repairs to plaster of thickness 12 mm to 20 mm in patches
60
7920
132
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Sand)
13.59
44344
3263
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete.Thrermo-mechanically treated bars.
324.47
17684
54.5
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :Foundations, footing, base of columns and plinth beam in any shape and size.
16.18
2249
139
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
9.99
2348
235
Edge of slab breaks in floorand wall up to 200mm
4.31
147
34
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
4.03
16777
4163
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar
works.
743.19
50537
68
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
25.62
1742
68
Removing white or colour wash by scrapping, sand papering and preparing the surface smooth including necessary repair to scratches etc. complete.
3385.62
14558
4.3
Removing dry or oil bound distemper by scraping sand papering and preparing the surfaces smooth including necessary repair to scratches etc. complete.
215.04
1118
5.2
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
215.04
20321
94.5
Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade. On new work (two or more coats)
215.04
9569
44.5
Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete.
1624.82
37371
23
Finishing walls with water proofing cement paint of required shade to give
an even shade. On new work (Two or more coats applied @ 3.84 kg/10 sqm)
1760.79
72192
41
Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metre lead.
8.89
6828
768
Demolishing brick masonry including arches, stacking of serviceable
material disposal of unserviceable material within 50 metres lead.
In cement mortar.
20.41
5368
263
Extra for cutting reinforcement bars in R.C.C. or R.B work. (Cross sectional area of RCC/RB work to be measured)
2.54
1135
447
Excavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
272.43
50400
185
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size).
17.95
47729
2659
Providing and placing in position reinforcement for R.C.C. work including
straightening, cutting, bending, binding etc. complete as per drawings
including cost of binding wire in foundation and plinth all complete:
Thermo-Mechanically treated bars FE 415
9746.07
531161
54.5
Columns, Pillars, Piers and likes- rectangular or square in shape
114.38
33971
297
Window sills, anchor blocks, string course, bends, copings, bed plates and
like.
73.1
13450
184
Wall of any thickness including attached pilasters, buttresses etc.
540.15
123154
228
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
150.71
627406
4163
Extra for brick work In S/S above plinth & up to floor five level.
48.72
164868
3384
Removing white or colour wash by scrapping, sand papering and preparing the surface smooth including necessary repair to scratches etc. Complete
745.88
3207
4.3
Providing and fixing in position G.I. barbed wire (93.8gram/m) to concrete/
wooden/ angle iron posts (straight or diagonal) including securing and
screwing with G.I. tying wire, G.I. stapples, G.I.U-nails or steel pins etc.,
complete(Cost of posts, struts to be paid for separately)
1405.75
13214
9.4
Providing and fixing in position door shutter made of square/ rectangular
hollow steel tube of approved size joint mitred, welded frame with two
Nos. intermediate rails, 200mm wide lock rail made of 1.6mm thick M.S.
sheet welded to intermediate rail, M.S. grill of approved pattern made of
M.S. flat or square or round bars welded to frames and provided M.S. butt hinges, all necessary fitting and finished by filling putty including applying a priming coat of red oxide zinc chromate primer all complete. (To be used in safety door shutters in buildings)
310
28985
93.5
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
275.39
29467
107
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
275.39
25198
91.5
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
164.12
14278
87
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
1526.83
85502
56
Steel work welded in built up sections/ framed work including cutting,
hoisting, fixing in position and applying a priming coat of red oxide zinc
chromate primer.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar
works.
204.75
13923
68
Applying priming coat on steel work with red oxide zinc chromate primer
25.98
455
17.5
Painting on new work (two or more coats) to give an even shade with:
37.03
2037
55
Dismantling flag stone flooring laid in cement/lime mortar including stacking of serviceable material and disposal of unserviceable material within 50 metre lead.
296.34
16891
57
Demolishing cement concrete including disposal of material within 50 metre lead.
7.2
3953
549
1:4:8 or leaner mix
40.54
13338
329
Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.
4
400
100
Taking out door shutters (steel or wood) including stacking within 50 metres lead.
3
140
46.5
Dismantling windows chowkhats with shutters (steel or wood) including
architrave, hold fast etc. complete and stacking within 50 metres lead..
6
399
66.5
Taking out wind ties from roof including cutting out rusted bolts, nuts etc.
and removing materials to any distance within compound and stacking.
450.71
451
1
Dismantling asbestos sheet roofing including ridges, hips valley and
gutters and stacking the materials with 50 m lead.
775.58
12797
16.5
Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metre lead.
4.66
3579
768
Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of rubbish to the dumping ground within 50metres lead :
40
5280
132
Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead.
16.86
4434
263
Extra for brick work In S/S above plinth & up to floor five level.
4.16
14077
3384
Extra for brick work In S/S above 4.00 m & upto 8.00 M
7.3
25587
3505
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete.Thrermo-mechanically treated bars.
582.16
31728
54.5
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size).
49.43
131434
2659
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :Foundations, footing, base of columns and plinth beam in any shape and size.
6.04
840
139
Beams, lintel, cantilevers & walls.
11.12
2246
202
(D) weather shade chhajja cornies and moulding.
5.72
1682
294
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
26.59
6249
235
Edge of slab breaks in floorand wall up to 200mm
15.82
538
34
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
1.5
6245
4163
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
5.28
22495
4260.5
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
89.65
8203
91.5
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
20.02
2142
107
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
47.04
4092
87
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
15
5565
371
Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm) finished with a floating
coat of neat cement.50mm thick
49.77
12642
254
75mm thick
296.34
102237
345
Extra for providing and fixing 4mm thick glass strip in joints of Terrazo
floor/ cement concrete floor or like. 40 mm wide
28.84
519
18
60 mm. Wide
392.64
9816
25
Providing and fixing steel door made of angle iron of suitable sizes with M.S. grill of approved pattern made of M.S. flats or square or round bars coat of red oxide zinc chromate primer.
454.84
36160
79.5
Providing and fixing in position welded steel wire fabric to concrete/ wooden/ angle iron posts including securing and screwing with G.I. tying wire, G.I. staples, G.I.U-nails or steel pins etc., complete Aperture 50x25mm
19.68
11198
569
Supplying and fixing rolling shutter of approved makes made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft, with brackets, side guides and arrangements for inside and out side locking with push and pull arrangement complete but excluding the cost of top cover and spring.80 x 1.25 mm. M.S. laths
17.79
30083
1691
Providing and fixing 27.5cm. long wire spring for rolling shutters.
8
2896
362
Providing and fixing M.S. sheet top cover for rolling shutter.0.90 mm. thick
8.09
3228
399
Providing andfixing ball bearing for rolling shutters.
8
3384
423
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
82.33
5557
67.5
Providing and fixing aluminium work for doors, windows, ventilators and
partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in wall/
floor with fixing clips or hold fasteners or bolts and nuts as required
aluminium sections shall be anodized transparent or dyed to approved
shade according to IS: 1868, minimum anodic coating shall be of grade
AC-15. (Glazing to be paid for separately: For fixed portion
21.55
7133
331
For shutter of doors, windows & ventilators including providing and making
provision for fixing of fitting wherever required including the cost of PVC/
neoprene gasket required (Fittings shall be paid for separately).
21.52
7274
338
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading.With float glass panes of 6 mm thickness
6.8
5467
804
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
6.18
11322
1832
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm
6
1428
238
Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 150 x10mm
6
345
57.5
Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete. 125 mm
6
135
22.5
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
3
141
47
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar
works.
235.37
16005
68
Providing and laying vitrified floor tiles with double charge/ multi charge
printing with water absorption less than 0.5% and conforming to IS :
15622 of approved make in all colours and shades and size mentioned
below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints with white cement and
matching pigments etc. complete. Size 600x600mm
26.54
30548
1151
Removing white or colour wash by scrapping, sand papering and preparing the surface smooth including necessary repair to scratches etc. complete.
1643.51
7067
4.3
Removing dry or oil bound distemper by scraping sand papering and preparing the surfaces smooth including necessary repair to scratches etc. complete.
82.91
431
5.2
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
114.13
10785
94.5
Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade. On new work (two or more coats)
154.91
6893
44.5
Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete.
832.42
19146
23
Finishing walls with water proofing cement paint of required shade to give
an even shade. On new work (Two or more coats applied @ 3.84 kg/10 sqm)
921.02
37762
41
Providing and fixing float glass panes with steel glazing clips and special
metal sash putty of approved make in steel doors, windows, ventilators: 4 mm. Thick
3.62
1937
535
Applying priming coat on steel work with red oxide zinc chromate primer
57.1
999
17.5
Painting on new work (two or more coats) to give an even shade with:
48.68
2677
55
Painting on old work (one or more coats) to give an even shade with:
37.4
1309
35
Supply, erection, jointing, testing & commissioning of "C" Class MS pipes (as per IS: 1239) including necessary specials such as tees, bends, flanges reducers etc., complete on wall/ ceiling. The pipes to be erected on wall or suspended from beams, RCC roof slabs with suitable size MS bars/ angle irons including painting of metal part except pipe line.
7
8841
1263
Supply and fixing of precoated galvanized iron profile sheets (size, shape
and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/-
5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in
240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet
and polyester top coat 15-18 microns. Sheet should have protective guard
film of 25 microns minimum to avoid scratches while transportation and
should be supplied in single length upto 12 metre or as desired by
Engineer-in-charge. The sheet shall be fixed using self drilling /self
tapping screws of size (5.5x 55mm) with EPDM seal or with polymer
coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I.
limpet washers or with G.I. limpet washers filled with white lead complete
upto any pitch in horizontal/ vertical or curved surfaces excluding the cost
of purlins, rafters and trusses and including cutting to size and shape
wherever required.
701.86
446383
636
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : Crimp curve
36.55
22807
624
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
64.16
4363
68
Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand & manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand.
169.16
7866
46.5
Window sills, anchor blocks, string course, bends, copings, bed plates and
like.
0.59
109
184
Above 6.00 M to 7.00 M
0.56
171
305.5
Above 7.00 M to 8.00 M
1.32
457
346
Above 8.00 M to 9.00 M
1.32
510
386.5
Above 9.00 M to 10.00 M
0.2
85
427
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work.
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm
nominal size).Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and
plinth:
0.75
3128
4170.5
Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metre lead.
3.13
2404
768
Demolishing brick masonry including arches, stacking of serviceable
material disposal of unserviceable material within 50 metres lead.
In cement mortar.
1.82
479
263
Extra for cutting reinforcement bars in R.C.C. or R.B work. (Cross sectional area of RCC/RB work to be measured)
1.06
474
447
Providing and placing in position reinforcement for R.C.C. work including
straightening, cutting, bending, binding etc. complete as per drawings
including cost of binding wire in foundation and plinth all complete:
Thermo-Mechanically treated bars FE 415
800.39
43621
54.5
Columns, Pillars, Piers and likes- rectangular or square in shape
54.04
16050
297
Window sills, anchor blocks, string course, bends, copings, bed plates and
like.
43.34
7975
184
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
8.19
34095
4163
Extra for brick work In S/S above plinth & up to floor five level.
20.03
67782
3384
Providing and fixing in position G.I. barbed wire (93.8gram/m) to concrete/
wooden/ angle iron posts (straight or diagonal) including securing and
screwing with G.I. tying wire, G.I. stapples, G.I.U-nails or steel pins etc.,
complete(Cost of posts, struts to be paid for separately)
833.5
7835
9.4
Providing and fixing in position door shutter made of square/ rectangular
hollow steel tube of approved size joint mitred, welded frame with two
Nos. intermediate rails, 200mm wide lock rail made of 1.6mm thick M.S.
sheet welded to intermediate rail, M.S. grill of approved pattern made of
M.S. flat or square or round bars welded to frames and provided M.S. butt hinges, all necessary fitting and finished by filling putty including applying a priming coat of red oxide zinc chromate primer all complete. (To be used in safety door shutters in buildings)
310
28985
93.5
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
235.43
25191
107
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
107.93
9876
91.5
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
119.93
10434
87
Removing white or colour wash by scrapping, sand papering and preparing the surface smooth including necessary repair to scratches etc. Complete
533.44
2294
4.3
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
968.64
54244
56
Steel work welded in built up sections/ framed work including cutting,
hoisting, fixing in position and applying a priming coat of red oxide zinc
chromate primer.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar
works.
50.4
3427
68
Applying priming coat on steel work with red oxide zinc chromate primer
9.11
159
17.5
Painting on new work (two or more coats) to give an even shade with:
20.12
1107
55
Excavation in Soil (by Manual Means.) Excavation for roadway in soil using including loading in tipper for carrying of cut earth to embankment site and unloading with all liftsand lead upto1000 meters as per relevant clauses of section 300. (a) Ordinari Soil
100.37
14052
140
Compacting Original Ground supporting sub-grade Loosening of the ground upto a level of 500 mm below the subgrade level , watered, graded and compacted in layers to meet requirement of table 300-2 for sub grade construction
97.37
4869
50
Plain cement concrete complete as per drawing and Technical
Specifications PCC Grade M 15
1.13
3152
2789
Plain cement concrete complete as per drawing and Technical. PCC Grade M 15
2.76
10400
3768
Providing and laying Reinforced Cement Concrete pipe NP 3 / prestressed concrete pipe. (Laying Reinforced cement concrete pipe NP3 /prestressed concrete pipe for culverts including fixing collar with cement mortar 1:2 but excluding bedding below pipes, excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . )450mm dia
7.5
13268
1769
Construction of Embankment with Material Deposited from Roadway Cutting (Construction of embankment with approved materials having C.B.R.5 (unless specified otherwise in the contract) deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2)
12.6
1008
80
Granular Sub-base as per Table:- 400-1
Construction o granular sub base by providing close graded Mareial, , Carriage of mixed Material to work site spreading in uniform layers with motor grader on on perpared surface watering , rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401(part-II) and suitably sprinkling arrangement as per clause 401 but excluding scarifying existing bituminous surface.(A) By Mix in Place method. Disintegrated rock i.e moorum having CBB value not less than 20 and P.I. and L.L. not more than 6 and 20 respectively .
30
13800
460
Wet Mix Macadam (Providing, laying, spreading and compacting
graded stone aggregate to wet mix macadam specification including
premixing the Material with water at OMC in mechanical mix plant
carriage of mixed Material by tipper to site, laying in uniform layers
with paver in sub- base / base course on well prepared surface and
compacting with vibratory roller to achieve the desired density as per
clause 406.)
34.45
49401
1434
Dry Lean Cement Concrete Sub-base as per IRC:SP-49
(Construction of dry lean cement concrete Sub-base over a prepared
sub-grade with coarse and fine aggregate conforming to IS: 383, the
size of coarse aggregate not exceeding 26.5 mm, aggregate cement
ratio not to exceed 15:1, aggregate gradation after blending to be as
per table 600-1, cement content not to be less than 150 kg/cum,
optimum moisture content to be determined during trial length
construction, concrete strength not to be less than 10 Mpa at 7 days,
mixed in a batching plant, transported to site, laid with a paver with
electronic sensor, compacting with 8-10 tonnes vibratory roller,
finishing and curing as per clause 601.)
14.98
34933
2332
Cement Concrete Pavement (Construction of un-reinforced, dowel
jointed, plain cement concrete pavement over a prepared sub-base,
coarse and fine aggregate conforming to IS:383, and graded as per
table 600-3, mixed as per approved mix design at site, laid, spread,
vibrated, compacted and finished in a continuous operation including
provision of contraction, expansion, construction and longitudinal
joints, joint filler, separation membrane, sealant primer, joint sealant,
de-bonding strip, dowel bar, tie rod, admixtures as approved, curing
compound, finishing to lines and grades as per drawing as per clause
602.) (i) With Cement concrete grade M-40 and minimum cement content @
400 kg/cum.
14.98
70526
4708
Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well within the selected habitation, including photography, interpretation of resistivity data and submission of report in the desired format along with resistivity readings, necessary graph and photographs. (only successful point is payable)
1
1502
1502
Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge upto 90 metre depth below ground level
30
11130
371
Rocky strata including Boulders.
90
35640
396
Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge beyond 90 metre & upto 150 metre depth below ground level.
30
12720
424
Supplying, assembling, lowering and fixing in vertical position in bore well, ISI marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per IS: 1239 (Part-1&Part-2) 1992 with IVth revision (Up-to-date amendments), of reputed & approved make, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer- in-charge.
32
41728
1304
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of:
1
217
217
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge
65
12935
199
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. CONCEALED WORK including cutting chases and making good the walls etc.,
10
2130
213
Providing and fixing gun metal non- return valve (vertical type) of
approved quality (screwed end) : 25 mm nominal bore
2
902
451
Providing and fixing 15 mm nominal bore Brass bib/stop cock of
approved quality: Bib cock (350 grams)
2
474
237
Stop cock (600 grams)
4
948
237
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
1000
7300
7.3
Providing and fixing white vitreous china urinal basin as per IS : 2556 complete: Flat back type urinal of size 460x380x250mm
1
872
872
Providing and fixing vitreous china 10 litre (full flush) capacity controlled flush low level cistern with all fittings complete.
2
2668
1334
`Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :White size 450x325 mm
2
2406
1203
Providing and fixing 15 mm nominal bore C.P copper connection pipe with C.P brass nuts collar and PVC bush of approved quality:
4
956
239
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
5
343
68.5
Providing and fixing stainless steel drain jali of approved make/quality.
5
255
51
Wiring for light/ fan/ exhaust fan / call bell point with 1.5
sqmm FR PVC insulated stranded copper conductor
single core cable in concealed PVC conduit, with 5 amp
modular switch, modular base and cover plate, suitable
size G.I. box and earthing the point with same size cable
as required. Short Point
4
1112
278
Medium point
5
2155
431
Long point
6
3570
595
Extra for providing and fixing light plug point on board in
concealed PVC conduit point wiring with modular type 3
pin 5 amp socket outlet and 5 amp switch including cost
of base and cover plate and G. I. box etc. as required.
5
1200
240
Wiring for light plug point with 2x2.5 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 6 Amp switch and 3
pin 6 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required.
3
1374
458
Wiring for light plug point with 2x2.5 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 6 Amp switch and 3
pin 6 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required.
2
1402
701
Wiring for power plug point with 2x4 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 16 Amp switch and
6 pin 16 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required
1
589
589
Wiring for power plug point with 2x4 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 16 Amp switch and
6 pin 16 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required
1
934
934
Wiring for circuit / sub main wiring allong witrh earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in concealed steel conduit as required. 3x2.5 sq. mm in 20 mm conduit
100
10400
104
6x2.5 sq. mm in 20 mm conduit.
25
4300
172
Earhting with copper earth plate 600 mm X 600 mm X 3 mm thkick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe.
1
6754
6754
Supplying and laying 8 SWG copper wire at 0.50 meter below ground level for conductor earth electrode, i/c solding etc. as required.
15
1140
76
providing and fixing metal clad SP&N switch fuse unit re wirable 230/250 volts , with porcelain re wireble fuse i/c drilling holes on the board, connection earting the body etc as required (Thimbeling shall be paid seperately ) (a) 32Amp
1
931
931
Supplying and fixing on surface/ recess following way,
240 volts SP&N MCB distribution board of sheet steel
phosphatized and powder painted complete with tinned
copper busbar, neutral busbar, earth bar, din bar,
detachable gland plate, including interconnections,
earthing etc. as required. (But without
MCB/RCCB/Isolator
1
736
736
Supplying and fixing DP MCB 240 volts C curve suitable for inductive load in the existing MCB DB Complete with connections testing and commissioning etc as required 6 amps to 32 amps
5
2140
428
Supplying and fixing following rating, 240 volts TWO POLE ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.
1
271
271
Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required
2
198
99
180mmx 100mmx60mm deep
2
242
121
200mmx 125mmx60mm deep
3
441
147
Supplying, instaling, testing and commissioning of following sizes ceiling fan with resistance type regulqator, i/c wiring the down fods of standard length up to 30 cm. with 1.5 sq. mm. FR PVC insulated, copper conductor, sinle core cable, earthing etc. complete as required. 1200 mm. sweep
3
4509
1503
Supplying, installation, testing and commissioning of
following T-5 fluorescent fitting (luminaries) complete with
electronic ballast but without fluorescent lamp, on ceiling/
wall surface, earthing the fitting etc. as required. Single box type with decorative end caps
5
3175
635
Supplying, installation, testing and commissioning of
following 230/250 volts LED street light fitting with all
accessories like driver, heat sink made of die cast
aluminium with IP 66 protection and 5 KV surge
protection on pole bracket complete as required and
furnishing 2 Yrs Guarantee certificate from manufacturer. 40-45 watt
6
57204
9534
Supplying, installation, testing and commissioning of
submersible pump set for water supply system with
submersible motor directly coupled to multi-stage
submersible pump of specified discharge capacity, head,
delivery size in existing bore well including 2 sets of
suitable size holding clamps made out of 50 mm X 6 mm
MS flat, connection with suitable submersible cable of
standard length etc. as required.
1
17633
17633
Supplying and fixing following dia HDPE pipe PE-80
Grade (8kg/sqcm) in single length in the suction/ delivery
line of water supply pump etc. as required
60
3750
62.5
Supplying, laying and fixing following size submersible
cable along with GI/PVC/HDFC pipe line or laid in ground
etc as required
95
6413
67.5
Supplying and fixing of following sizes GM non return
valve ISI mark in the suction/ delivery line etc. as
required.
1
652
652
Supplying and laying of approved make stainless steel
wire rope of 6 mm dia for support of submersible pump
set complete with tying to pump set and pump holding
clamp
60
990
16.5
Supply, installation, testing and commissioning of 1-3 HP
1 phase submersible motor starter cum control wall/ floor
mounted type made out of not less than 1.6 mm thick MS
sheet and comprising of following panel mounting
switchgears there in including connection inter connection etc. as required.
a) Phase indicating lamps with fuses and toggle switches
1 set
b) 1/2/3 HP 1 phase DOL starter with over load and no
volt relay 1 No
c) 25 A "C" curve DPMCB 1 No
d) Voltmeter 0-250 V 1 set
e) Ammeter 0-10 A 1 se
1
4125
4125
Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.
9
900
100
Dismantling windows chowkhats with shutters (steel or wood) including
architrave, hold fast etc. complete and stacking within 50 metres lead..
8
532
66.5
Dismantling asbestos sheet roofing including ridges, hips valley and
gutters and stacking the materials with 50 m lead.
77.99
1287
16.5
Dismantling steel work in built-up section without dismembering for a span upto 10 metre and height upto 5.0 metre above plinth level including stacking with in 50 metre lead.
308.7
278
0.9
Demolishing cement concrete including disposal of material within 50 metre lead.
2.78
1526
549
1:4:8 or leaner mix
5.21
1714
329
Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metre lead.
1.73
1329
768
Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead.
56.96
14980
263
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
66.67
6100
91.5
Excavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
62.21
11509
185
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm
nominal size).
5.72
13779
2409
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size).
20.82
55360
2659
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Sand)
19.26
62845
3263
Extra for brick work In S/S above plinth & up to floor five level.
40.1
135698
3384
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including formwork.
1.16
4915
4237
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete.Thrermo-mechanically treated bars.
3059.86
166762
54.5
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
33
137379
4163
Extra for precast PCC/ RCC work of any mix including form work, hoisting
and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing
with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but
excluding reinforcement.
0.87
408
469
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :Foundations, footing, base of columns and plinth beam in any shape and size.
49.7
6908
139
Columns, Pillars, Piers and likes- rectangular or square in shape
65.38
19418
297
Beams, lintel, cantilevers & walls.
45.49
9189
202
(D) weather shade chhajja cornies and moulding.
10.89
3202
294
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
83.24
19561
235
Edge of slab breaks in floorand wall up to 200mm
54.91
1867
34
Stair cases of all types excluding spiral and folded plate type, including risers and landings.Up to 4.00 M. height from P.L.
6.57
1511
230
(G) Stair cases of all types excluding spiral and folded plate type, including risers and landings
(a) Up to 4.00 M. height from P.L.
62.21
4044
65
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
42.34
15708
371
25mm thick Local RAJIM/ Red Flag stone slab flooring laid over 20mm
(Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand)
laid over & jointed with grey cement slurry mixed with pigments to
match the shade of the stone i/c grinding, rubbing and polishing.
2.76
1424
516
Long point
11.12
6616
595
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
(a) In Angle-iron frames
158.96
11684
73.5
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
462.78
31238
67.5
Providing and fixing aluminium work for doors, windows, ventilators and
partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in wall/
floor with fixing clips or hold fasteners or bolts and nuts as required
aluminium sections shall be anodized transparent or dyed to approved
shade according to IS: 1868, minimum anodic coating shall be of grade
AC-15. (Glazing to be paid for separately: For fixed portion
26.99
8934
331
For shutter of doors, windows & ventilators including providing and making
provision for fixing of fitting wherever required including the cost of PVC/
neoprene gasket required (Fittings shall be paid for separately).
27.3
9227
338
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading.With float glass panes of 6 mm thickness
11.02
8860
804
Providing and fixing factory made ISI marks steel doors, windows and
ventilators side/ top/ centre hung made up of standard rolled steel section
conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints
mitred and flash butt and sash bars tenoned and riveted/ welded with 10
cm long lugs of size 15x3mm embedded in cement concrete block
15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone
aggregate 20 mm nominal size) or rawl plugs and screws or with bolts
and nuts as required including providing and fixing of hinges, pivots,
handles, pegs, stays, rolling devices, locking arrangements, spring catch
etc., as required complete including applying a priming coat of red oxide
zinc chromate primer.
71.28
6273
88
Providing and fixing float glass panes with steel glazing clips and special
metal sash putty of approved make in steel doors, windows, ventilators: 4 mm. Thick
2.72
1455
535
Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm) finished with a floating
coat of neat cement.50mm thick
58.6
14884
254
Extra for providing and fixing 4mm thick glass strip in joints of Terrazo
floor/ cement concrete floor or like. 40 mm wide
64
1152
18
Providing and laying ceramic glazed floor tiles conforming to IS : 15622
of approved size, make, colour, shade laid on 20 mm thick Cement
Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
8.15
5640
692
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622
of approved make, colours, shades and size on wall and dados over 12
mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with matching pigment complete. Size upto 200x300mm
37.15
21807
587
Providing and laying vitrified floor tiles with double charge/ multi charge
printing with water absorption less than 0.5% and conforming to IS :
15622 of approved make in all colours and shades and size mentioned
below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints with white cement and
matching pigments etc. complete. Size 600x600mm
63.86
73503
1151
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I),
decorative type core of block board construction with frame of first class
hard wood and well matched teak ply veneering with vertical grains or
cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
10.4
19053
1832
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm
10
2380
238
Providing and fixing aluminium sliding door bolts with 16mm rod, necessary nickle plated iron nuts bolts and screws etc complete. 250x16mm.
4
564
141
Providing and fixing aluminium tower bolts (Barrel type) with necessary nickle plated iron screws etc complete. 100 x10mm
2
89
44.5
Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 150 x10mm
8
460
57.5
Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete. 125 mm
10
225
22.5
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
5
235
47
Providing and fixing factory made PVC door shutters of specified
thickness made of styles and rails of a UPVC hollow section of specified
size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on
both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws.24 mm thick door shutters with styles and rails of size 59x24 mm
3.23
7749
2399
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
281.73
25778
91.5
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
192.95
20646
107
Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand)
49.97
4347
87
Providing and making moulded mortar band in cement mortar 1:4 (1cement : 4 fine sand) per cm width: 12 mm thick
23.15
194
8.4
Extra for lining over plaster to imitate stone or concrete block walling.
100
2350
23.5
Neat cement punning.
14.4
475
33
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
357.33
33768
94.5
Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade. On new work (two or more coats)
357.33
15901
44.5
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
255.54
14310
56
Painting on new work (two or more coats) to give an even shade with:
66.49
3657
55
Providing and fixing vitreous china water closet squatting pan (Indian type) including cutting and making good the walls and floors wherever required:White Orissa pattern W.C. pan of size 580x440 mm
1
1440
1440
`Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :White size 450x325 mm
1
1203
1203
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and
making good the walls wherever required :345x445 mm bowl depth 200 mm.
1
6298
6298
Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with C.P brass nuts collar and PVC bush of approved quality and colour: 45 CM length
1
239
239
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia
2
137
68.5
Providing and fixing on wall face or under floor UV stabilized
Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall
thickness conforming to IS : 13592 (4kg/sqcm) including required
couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm
gap for thermal expansion etc complete. 110 mm dia pipe.
30.35
8103
267
Providing and fixing on wall face UV stabilized Unplasticised - PVC
moulded fittings/ accessories having 3.2mm wall thickness for Rigid
PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring
conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm
10
1540
154
(B) "P" trap 110mmx110mm long
2
454
227
(e) Nahani trap
3
272
90.5
(f) Vent covel (a) 110mm.
1
44
44
Providing and fixing on wall surface G.I. pipes medium class complete
with G.I. fittings and clamps, including cutting, making good the walls etc.
and testing of joints complete: 25 mm dia. nominal bore
80
20640
258
15 mm dia. nominal bore
1
149
149
Providing and fixing concealed in wall G.I. pipes medium class complete
with G.I. fittings and clamps, including painting with anti corrosive
bitumastic paint, cutting chases, making good the walls etc. and testing of
joints complete: 15 mm dia nominal bore
10
1880
188
20 mm dia nominal bore
5
1105
221
Providing and fixing gun metal non- return valve (vertical type) of
approved quality (screwed end) : 25 mm nominal bore
2
902
451
Providing and fixing stainless steel drain jali of approved make/quality.
3
153
51
Providing and fixing 15 mm nominal bore Brass bib/stop cock of
approved quality: Bib cock (350 grams)
5
1185
237
Stop cock (600 grams)
1
237
237
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
1000
7300
7.3
Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
2
3418
1709
Providing and constructing brick masonry chamber for underground pipe and and bends with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
1
3796
3796
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
51
4667
91.5
Wiring for light/ fan/ exhaust fan / call bell point with 1.5
sqmm FR PVC insulated stranded copper conductor
single core cable in concealed PVC conduit, with 5 amp
modular switch, modular base and cover plate, suitable
size G.I. box and earthing the point with same size cable
as required. Short Point
8
2224
278
Medium point
10
4310
431
Long point
6
3570
595
Extra for providing and fixing light plug point on board in
concealed PVC conduit point wiring with modular type 3
pin 5 amp socket outlet and 5 amp switch including cost
of base and cover plate and G. I. box etc. as required.
8
1920
240
Wiring for light plug point with 2x2.5 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 6 Amp switch and 3
pin 6 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required.
2
916
458
Wiring for light plug point with 2x2.5 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 6 Amp switch and 3
pin 6 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required.
2
1402
701
Long point
1
988
988
Wiring for power plug point with 2x4 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 16 Amp switch and
6 pin 16 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required
1
589
589
Wiring for power plug point with 2x4 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 16 Amp switch and
6 pin 16 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required
3
2802
934
Wiring for power plug point with 2x4 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 16 Amp switch and
6 pin 16 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required. Long Point
1
1347
1347
Wiring for circuit / sub main wiring allong witrh earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in concealed steel conduit as required. 3x2.5 sq. mm in 20 mm conduit
30
3120
104
6x2.5 sq. mm in 20 mm conduit.
10
1720
172
Earhting with copper earth plate 600 mm X 600 mm X 3 mm thkick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe.
1
6754
6754
Supplying and laying 8 SWG copper wire at 0.50 meter below ground level for conductor earth electrode, i/c solding etc. as required.
7
532
76
providing and fixing metal clad SP&N switch fuse unit re wirable 230/250 volts , with porcelain re wireble fuse i/c drilling holes on the board, connection earting the body etc as required (Thimbeling shall be paid seperately ) (a) 32Amp
1
931
931
32 Amp TP&N
2
2382
1191
Supplying and fixing on surface/ recess following way,
240 volts SP&N MCB distribution board of sheet steel
phosphatized and powder painted complete with tinned
copper busbar, neutral busbar, earth bar, din bar,
detachable gland plate, including interconnections,
earthing etc. as required. (But without
MCB/RCCB/Isolator
1
602
602
Supplying and fixing DP MCB 240 volts C curve suitable for inductive load in the existing MCB DB Complete with connections testing and commissioning etc as required 6 amps to 32 amps
6
2568
428
Supplying and fixing following rating, 240 volts TWO POLE ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.
1
271
271
Wiring for light/ fan/ exhaust fan / call bell point with 1.5
sqmm FR PVC insulated stranded copper conductor
single core cable in concealed PVC conduit, with 5 amp
modular switch, modular base and cover plate, suitable
size G.I. box and earthing the point with same size cable
as required. Short Point
20
5560
278
Laying of following sizes one number additional power
cable of 1.1 KV grade direct in ground in the same trench
in one tier horizontal formation including excavation, sand
cushioning, protective covering and refilling the trench etc
as required.
20
2700
135
Providing and fixing round/ hexagonal fan box (125mm
dia) depth 75mm (max.) with 12mm dia steel bar hook,
1.6mm thick MS sheet cover, in RCC slab etc. as
required
7
298
42.5
METAL, WOODEN AND PVC BOXES
6.1 Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required
2
187
93.5
150 mm X 75 mm X 60 mm deep
1
94
93.5
180mmx 100mmx60mm deep
1
121
121
200 mm X 300 mm X 60 mm deep
5
1120
224
Supplying, instaling, testing and commissioning of following sizes ceiling fan with resistance type regulqator, i/c wiring the down fods of standard length up to 30 cm. with 1.5 sq. mm. FR PVC insulated, copper conductor, sinle core cable, earthing etc. complete as required. 1200 mm. sweep
7
10521
1503
Supplying, installation, testing and commissioning of
following concealed type fluorescent fitting (luminaries)
complete with electronic ballast/ copper ballast glow type
starter (if required) but without fluorescent lamp, in false
ceiling hanged with 2 Nos G.I chain to ceiling/ truss frame
earthing the fitting etc. as required.
7
1904
272
Supplying, installation, testing and commissioning of
following CFL down lighter luminaries with mirror
reflector, but without CFL lamp, on surface/ recess in
false ceiling including connection, testing and
commissioning as required
3
2901
967
Excavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
33.36
6172
185
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm
nominal size).
4.08
9829
2409
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size).
5.96
15848
2659
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Sand)
13.55
44214
3263
Extra for brick work In S/S above plinth & up to floor five level.
21.24
71876
3384
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including formwork.
0.37
1568
4237
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete.Thrermo-mechanically treated bars.
1911.39
104171
54.5
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
18.88
78597
4163
Extra for precast PCC/ RCC work of any mix including form work, hoisting
and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing
with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but
excluding reinforcement.
0.79
371
469
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :Foundations, footing, base of columns and plinth beam in any shape and size.
25.83
3590
139
Columns, Pillars, Piers and likes- rectangular or square in shape
44.38
13181
297
Beams, lintel, cantilevers & walls.
16.22
3276
202
(D) weather shade chhajja cornies and moulding.
6.06
1782
294
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
46.72
10979
235
Edge of slab breaks in floorand wall up to 200mm
35.45
1205
34
Stair cases of all types excluding spiral and folded plate type, including risers and landings.Up to 4.00 M. height from P.L.
6.4
1472
230
Window sills, anchor blocks, string course, bends, copings, bed plates and
like.
4.84
891
184
(G) Stair cases of all types excluding spiral and folded plate type, including risers and landings
(a) Up to 4.00 M. height from P.L.
33.36
2168
65
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
15.07
5591
371
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
(a) In Angle-iron frames
239.17
17579
73.5
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
347.97
23488
67.5
Providing and fixing factory made ISI marks steel doors, windows and
ventilators side/ top/ centre hung made up of standard rolled steel section
conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints
mitred and flash butt and sash bars tenoned and riveted/ welded with 10
cm long lugs of size 15x3mm embedded in cement concrete block
15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone
aggregate 20 mm nominal size) or rawl plugs and screws or with bolts
and nuts as required including providing and fixing of hinges, pivots,
handles, pegs, stays, rolling devices, locking arrangements, spring catch
etc., as required complete including applying a priming coat of red oxide
zinc chromate primer.
74.23
6532
88
Providing and fixing float glass panes with steel glazing clips and special
metal sash putty of approved make in steel doors, windows, ventilators: 4 mm. Thick
2.19
1172
535
Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm) finished with a floating
coat of neat cement.50mm thick
62.1
15773
254
Extra for providing and fixing 4mm thick glass strip in joints of Terrazo
floor/ cement concrete floor or like. 40 mm wide
55.83
1005
18
Providing and laying ceramic glazed floor tiles conforming to IS : 15622
of approved size, make, colour, shade laid on 20 mm thick Cement
Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
3.22
2228
692
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622
of approved make, colours, shades and size on wall and dados over 12
mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with matching pigment complete. Size upto 200x300mm
16.17
9492
587
25mm thick Local RAJIM/ Red Flag stone slab flooring laid over 20mm
(Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand)
laid over & jointed with grey cement slurry mixed with pigments to
match the shade of the stone i/c grinding, rubbing and polishing.
1.38
712
516
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I),
decorative type core of block board construction with frame of first class
hard wood and well matched teak ply veneering with vertical grains or
cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
12.71
23285
1832
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm
6
1428
238
Providing and fixing aluminium sliding door bolts with 16mm rod, necessary nickle plated iron nuts bolts and screws etc complete. 250x16mm.
2
282
141
Providing and fixing aluminium tower bolts (Barrel type) with necessary nickle plated iron screws etc complete. 100 x10mm
1
45
44.5
Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 150 x10mm
8
460
57.5
100 x10mm
11
451
41
Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete. 125 mm
6
135
22.5
100 MM
10
220
22
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
4
188
47
Providing and fixing factory made PVC door shutters of specified
thickness made of styles and rails of a UPVC hollow section of specified
size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on
both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws.24 mm thick door shutters with styles and rails of size 59x24 mm
1.61
3862
2399
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work. 1: 1:5: 3 (1 cement : 1:3 coarse sand : 3 graded stone aggregate 40mm
nominal size).
0.77
2735
3552
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
222
20313
91.5
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
135.42
14490
107
Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand)
90.54
7877
87
Providing and making moulded mortar band in cement mortar 1:4 (1cement : 4 fine sand) per cm width: 12 mm thick
48.4
407
8.4
Extra for lining over plaster to imitate stone or concrete block walling.
10.06
236
23.5
Neat cement punning.
32.38
1069
33
Distempering with acrylic washable distemper to give an even shade.On new work (Two or more coats)
192
7296
38
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with: On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
219.69
12303
56
Painting on new work (two or more coats) to give an even shade with:
58.45
3215
55
Providing and fixing vitreous china water closet squatting pan (Indian type) including cutting and making good the walls and floors wherever required:White Orissa pattern W.C. pan of size 580x440 mm
1
1440
1440
`Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :White size 450x325 mm
1
1203
1203
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and
making good the walls wherever required :345x445 mm bowl depth 200 mm.
1
6298
6298
Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with C.P brass nuts collar and PVC bush of approved quality and colour: 45 CM length
1
239
239
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia
2
137
68.5
Providing and fixing on wall face or under floor UV stabilized
Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall
thickness conforming to IS : 13592 (4kg/sqcm) including required
couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm
gap for thermal expansion etc complete. 110 mm dia pipe.
22.35
5967
267
Providing and fixing on wall face UV stabilized Unplasticised - PVC
moulded fittings/ accessories having 3.2mm wall thickness for Rigid
PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring
conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm
13
2002
154
(B) "P" trap 110mmx110mm long
1
227
227
(e) Nahani trap
3
272
90.5
(f) Vent covel (a) 110mm.
1
44
44
Providing and fixing on wall surface G.I. pipes medium class complete
with G.I. fittings and clamps, including cutting, making good the walls etc.
and testing of joints complete: 25 mm dia. nominal bore
25
6450
258
15 mm dia. nominal bore
5
745
149
Providing and fixing concealed in wall G.I. pipes medium class complete
with G.I. fittings and clamps, including painting with anti corrosive
bitumastic paint, cutting chases, making good the walls etc. and testing of
joints complete: 15 mm dia nominal bore
5
940
188
20 mm dia nominal bore
5
1105
221
Providing and fixing gun metal non- return valve (vertical type) of
approved quality (screwed end) : 25 mm nominal bore
3
1353
451
Providing and fixing stainless steel drain jali of approved make/quality.
2
102
51
Providing and fixing 15 mm nominal bore Brass bib/stop cock of
approved quality: Bib cock (350 grams)
4
948
237
Stop cock (600 grams)
1
237
237
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
500
3650
7.3
Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
2
3418
1709
Wiring for light/ fan/ exhaust fan / call bell point with 1.5
sqmm FR PVC insulated stranded copper conductor
single core cable in concealed PVC conduit, with 5 amp
modular switch, modular base and cover plate, suitable
size G.I. box and earthing the point with same size cable
as required. Short Point
5
1390
278
Medium point
4
1724
431
Long point
2
1190
595
Extra for providing and fixing light plug point on board in
concealed PVC conduit point wiring with modular type 3
pin 5 amp socket outlet and 5 amp switch including cost
of base and cover plate and G. I. box etc. as required.
6
1440
240
Wiring for light plug point with 2x2.5 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 6 Amp switch and 3
pin 6 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required.
1
458
458
Wiring for light plug point with 2x2.5 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 6 Amp switch and 3
pin 6 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required.
1
701
701
Long point
1
988
988
Wiring for power plug point with 2x4 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 16 Amp switch and
6 pin 16 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required
1
589
589
Wiring for power plug point with 2x4 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 16 Amp switch and
6 pin 16 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required
1
934
934
Wiring for power plug point with 2x4 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 16 Amp switch and
6 pin 16 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required. Long Point
1
1347
1347
Wiring for circuit / sub main wiring allong witrh earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in concealed steel conduit as required. 3x2.5 sq. mm in 20 mm conduit
55
5720
104
6x2.5 sq. mm in 20 mm conduit.
25
4300
172
Earhting with copper earth plate 600 mm X 600 mm X 3 mm thkick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe.
1
6754
6754
Supplying and laying 8 SWG copper wire at 0.50 meter below ground level for conductor earth electrode, i/c solding etc. as required.
6
456
76
providing and fixing metal clad SP&N switch fuse unit re wirable 230/250 volts , with porcelain re wireble fuse i/c drilling holes on the board, connection earting the body etc as required (Thimbeling shall be paid seperately ) (a) 32Amp
2
1862
931
Supplying and fixing on surface/ recess following way,
240 volts SP&N MCB distribution board of sheet steel
phosphatized and powder painted complete with tinned
copper busbar, neutral busbar, earth bar, din bar,
detachable gland plate, including interconnections,
earthing etc. as required. (But without
MCB/RCCB/Isolator
1
602
602
Supplying and fixing DP MCB 240 volts C curve suitable for inductive load in the existing MCB DB Complete with connections testing and commissioning etc as required 6 amps to 32 amps
4
1712
428
Supplying and fixing following rating, 240 volts TWO POLE ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.
1
271
271
Wiring for light/ fan/ exhaust fan / call bell point with 1.5
sqmm FR PVC insulated stranded copper conductor
single core cable in concealed PVC conduit, with 5 amp
modular switch, modular base and cover plate, suitable
size G.I. box and earthing the point with same size cable
as required. Short Point
30
8340
278
Laying of following sizes one number additional power
cable of 1.1 KV grade direct in ground in the same trench
in one tier horizontal formation including excavation, sand
cushioning, protective covering and refilling the trench etc
as required.
30
4050
135
Providing and fixing round/ hexagonal fan box (125mm
dia) depth 75mm (max.) with 12mm dia steel bar hook,
1.6mm thick MS sheet cover, in RCC slab etc. as
required
3
128
42.5
METAL, WOODEN AND PVC BOXES
6.1 Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required
1
94
93.5
150 mm X 75 mm X 60 mm deep
1
99
99
180mmx 100mmx60mm deep
1
121
121
200mmx 125mmx60mm deep
2
294
147
Supplying, instaling, testing and commissioning of following sizes ceiling fan with resistance type regulqator, i/c wiring the down fods of standard length up to 30 cm. with 1.5 sq. mm. FR PVC insulated, copper conductor, sinle core cable, earthing etc. complete as required. 1200 mm. sweep
3
4509
1503
Supplying, installation, testing and commissioning of
following concealed type fluorescent fitting (luminaries)
complete with electronic ballast/ copper ballast glow type
starter (if required) but without fluorescent lamp, in false
ceiling hanged with 2 Nos G.I chain to ceiling/ truss frame
earthing the fitting etc. as required.
3
816
272
Supplying, installation, testing and commissioning of
following 230/250 volts LED street light fitting with all
accessories like driver, heat sink made of die cast
aluminium with IP 66 protection and 5 KV surge
protection on pole bracket complete as required and
furnishing 2 Yrs Guarantee certificate from manufacturer. 40-45 watt
1
9534
9534
Excavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
19.75
3654
185
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size).
2.74
7286
2659
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size).
0.9
2673
2970
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Sand)
8.1
26430
3263
Extra for brick work In S/S above plinth & up to floor five level.
6.44
21793
3384
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including formwork.
0.32
1356
4237
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete.Thrermo-mechanically treated bars.
639.18
34835
54.5
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
3.79
15778
4163
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
3.09
13165
4260.5
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :Foundations, footing, base of columns and plinth beam in any shape and size.
9.06
1259
139
Columns, Pillars, Piers and likes- rectangular or square in shape
20.26
6017
297
Beams, lintel, cantilevers & walls.
6.44
1301
202
(D) weather shade chhajja cornies and moulding.
0.89
262
294
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
13.72
3224
235
Edge of slab breaks in floorand wall up to 200mm
24.4
830
34
(G) Stair cases of all types excluding spiral and folded plate type, including risers and landings
(a) Up to 4.00 M. height from P.L.
19.75
1284
65
Providing and laying ceramic glazed floor tiles conforming to IS : 15622
of approved size, make, colour, shade laid on 20 mm thick Cement
Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
2.99
2069
692
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622
of approved make, colours, shades and size on wall and dados over 12
mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with matching pigment complete. Size upto 200x300mm
15.36
9016
587
Providing and laying vitrified floor tiles with double charge/ multi charge
printing with water absorption less than 0.5% and conforming to IS :
15622 of approved make in all colours and shades and size mentioned
below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints with white cement and
matching pigments etc. complete. Size 600x600mm
7.48
8609
1151
Providing and fixing factory made PVC door shutters of specified
thickness made of styles and rails of a UPVC hollow section of specified
size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on
both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws.24 mm thick door shutters with styles and rails of size 59x24 mm
1.61
3862
2399
Providing and fixing aluminium door latch with 12mm rod, necessary nickel plated iron nuts bolts and screws etc complete.
2
103
51.5
Providing and fixing aluminium tower bolts (Barrel type) with necessary nickle plated iron screws etc complete. 100 x10mm
1
45
44.5
Providing and fixing aluminium door handles 2.5mm thick with necessary nickel plated iron screws etc complete.
2
61
30.5
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I),
decorative type core of block board construction with frame of first class
hard wood and well matched teak ply veneering with vertical grains or
cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
1.83
3353
1832
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm
2
476
238
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
(a) In Angle-iron frames
37.72
2772
73.5
Providing and fixing factory made ISI marks steel doors, windows and
ventilators side/ top/ centre hung made up of standard rolled steel section
conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints
mitred and flash butt and sash bars tenoned and riveted/ welded with 10
cm long lugs of size 15x3mm embedded in cement concrete block
15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone
aggregate 20 mm nominal size) or rawl plugs and screws or with bolts
and nuts as required including providing and fixing of hinges, pivots,
handles, pegs, stays, rolling devices, locking arrangements, spring catch
etc., as required complete including applying a priming coat of red oxide
zinc chromate primer.
17.82
1568
88
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
15.46
1044
67.5
Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
75.32
6892
91.5
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
34.29
3669
107
Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand)
15.46
1345
87
Providing and making moulded mortar band in cement mortar 1:4 (1cement : 4 fine sand) per cm width: 12 mm thick
15.4
129
8.4
Neat cement punning.
14.63
483
33
Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade. On new work (two or more coats)
39.08
1739
44.5
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with: On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
55.03
3082
56
Providing and fixing float glass panes with steel glazing clips and special
metal sash putty of approved make in steel doors, windows, ventilators: 4 mm. Thick
0.68
364
535
Painting on new work (two or more coats) to give an even shade with:
1.62
89
55
Providing and fixing vitreous china water closet squatting pan (Indian type) including cutting and making good the walls and floors wherever required:White Orissa pattern W.C. pan of size 580x440 mm
1
1440
1440
`Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :White size 450x325 mm
1
1203
1203
Providing and fixing 10 litre capacity P.V.C. low level flushing cistern conforming to IS : 7231, with all fittings and fixtures complete.
1
1334
1334
Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with C.P brass nuts collar and PVC bush of approved quality and colour: 45 CM length
1
239
239
Providing and fixing on wall face or under floor UV stabilized
Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall
thickness conforming to IS : 13592 (4kg/sqcm) including required
couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm
gap for thermal expansion etc complete. 110 mm dia pipe.
20
5340
267
Providing and fixing on wall face UV stabilized Unplasticised - PVC
moulded fittings/ accessories having 3.2mm wall thickness for Rigid
PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring
conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm
7
1078
154
(B) "P" trap 110mmx110mm long
1
227
227
(f) Plain reducing Tee 110x75mm
3
387
129
(e) Nahani trap 110x75mm
2
181
90.5
(f) Vent covel (a) 110mm.
1
44
44
Providing and fixing on wall surface G.I. pipes medium class complete
with G.I. fittings and clamps, including cutting, making good the walls etc.
and testing of joints complete: 25 mm dia. nominal bore
40
10320
258
15 mm dia. nominal bore
1.5
224
149
Providing and fixing concealed in wall G.I. pipes medium class complete
with G.I. fittings and clamps, including painting with anti corrosive
bitumastic paint, cutting chases, making good the walls etc. and testing of
joints complete: 15 mm dia nominal bore
5
940
188
20 mm dia nominal bore
5
1105
221
Providing and fixing gun metal non- return valve (vertical type) of
approved quality (screwed end) : 25 mm nominal bore
2
902
451
Providing and fixing stainless steel drain jali of approved make/quality.
2
102
51
Providing and fixing 15 mm nominal bore Brass bib/stop cock of
approved quality: Bib cock (350 grams)
2
474
237
Stop cock (600 grams)
2
474
237
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
500
3650
7.3
Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
2
3418
1709
Excavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
20.29
3754
185
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size).
3.12
8296
2659
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size).
0.9
2673
2970
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Sand)
9.51
31031
3263
Extra for brick work In S/S above plinth & up to floor five level.
7.11
24060
3384
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including formwork.
0.34
1441
4237
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete.Thrermo-mechanically treated bars.
683.4
37245
54.5
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
5.64
23479
4163
Extra for precast PCC/ RCC work of any mix including form work, hoisting
and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing
with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but
excluding reinforcement.
0.15
70
469
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :Foundations, footing, base of columns and plinth beam in any shape and size.
8.62
1198
139
Columns, Pillars, Piers and likes- rectangular or square in shape
20.21
6002
297
Beams, lintel, cantilevers & walls.
5.93
1198
202
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
14.15
3325
235
Edge of slab breaks in floorand wall up to 200mm
20.52
698
34
(G) Stair cases of all types excluding spiral and folded plate type, including risers and landings
(a) Up to 4.00 M. height from P.L.
20.29
1319
65
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
4.17
1547
371
Providing and laying ceramic glazed floor tiles conforming to IS : 15622
of approved size, make, colour, shade laid on 20 mm thick Cement
Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
17
11764
692
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622
of approved make, colours, shades and size on wall and dados over 12
mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with matching pigment complete. Size upto 200x300mm
30.3
17786
587
Providing and fixing factory made PVC door shutters of specified
thickness made of styles and rails of a UPVC hollow section of specified
size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on
both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws.24 mm thick door shutters with styles and rails of size 59x24 mm
3.23
7749
2399
Providing and laying vitrified floor tiles with double charge/ multi charge
printing with water absorption less than 0.5% and conforming to IS :
15622 of approved make in all colours and shades and size mentioned
below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints with white cement and
matching pigments etc. complete. Size 600x600mm
7.48
8609
1151
Providing and fixing aluminium door latch with 12mm rod, necessary nickel plated iron nuts bolts and screws etc complete.
4
206
51.5
Providing and fixing aluminium tower bolts (Barrel type) with necessary nickle plated iron screws etc complete. 100 x10mm
2
89
44.5
Providing and fixing aluminium door handles 2.5mm thick with necessary nickel plated iron screws etc complete.
4
122
30.5
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
(a) In Angle-iron frames
48.11
3536
73.5
Providing and fixing factory made ISI marks steel doors, windows and
ventilators side/ top/ centre hung made up of standard rolled steel section
conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints
mitred and flash butt and sash bars tenoned and riveted/ welded with 10
cm long lugs of size 15x3mm embedded in cement concrete block
15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone
aggregate 20 mm nominal size) or rawl plugs and screws or with bolts
and nuts as required including providing and fixing of hinges, pivots,
handles, pegs, stays, rolling devices, locking arrangements, spring catch
etc., as required complete including applying a priming coat of red oxide
zinc chromate primer.
17.82
1568
88
15 mm thick Marble work (machine cut, table rubbed & polished) for wall lining (veneer work) in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) mixed with matching pigment. (Area of slab should be over 0.5 sqm)
1.49
2868
1925
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
15.46
1044
67.5
Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
89.69
8207
91.5
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
38.62
4132
107
Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand)
8.14
708
87
Providing and making moulded mortar band in cement mortar 1:4 (1cement : 4 fine sand) per cm width: 12 mm thick
11.4
96
8.4
Neat cement punning.
14.12
466
33
Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade. On new work (two or more coats)
28.85
1284
44.5
Applying one coat of cement primer on wall surface (applied @ 0.80
litrs/10 sqm) complete.
66.08
1520
23
Finishing walls with water proofing cement paint of required shade to give an even shade.
66.08
2709
41
Providing and fixing float glass panes with steel glazing clips and special
metal sash putty of approved make in steel doors, windows, ventilators: 4 mm. Thick
0.68
364
535
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with: On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
1.62
91
56
Providing and fixing vitreous china water closet squatting pan (Indian type) including cutting and making good the walls and floors wherever required:White Orissa pattern W.C. pan of size 580x440 mm
2
2880
1440
Providing and fixing white vitreous china urinal basin as per IS : 2556 complete: Flat back type urinal of size 460x380x250mm
3
2616
872
`Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :White size 450x325 mm
2
2406
1203
Providing and fixing 10 litre capacity P.V.C. low level flushing cistern conforming to IS : 7231, with all fittings and fixtures complete.
2
2668
1334
Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with C.P brass nuts collar and PVC bush of approved quality and colour: 45 CM length
5
1195
239
Providing and fixing on wall face or under floor UV stabilized
Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall
thickness conforming to IS : 13592 (4kg/sqcm) including required
couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm
gap for thermal expansion etc complete. 110 mm dia pipe.
15
4005
267
Providing and fixing on wall face UV stabilized Unplasticised - PVC
moulded fittings/ accessories having 3.2mm wall thickness for Rigid
PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring
conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm
7
1078
154
(B) "P" trap 110mmx110mm long
2
454
227
(f) Plain reducing Tee 110x75mm
3
387
129
(e) Nahani trap 110x75mm
2
181
90.5
(f) Vent covel (a) 110mm.
1
44
44
Providing and fixing on wall surface G.I. pipes medium class complete
with G.I. fittings and clamps, including cutting, making good the walls etc.
and testing of joints complete: 25 mm dia. nominal bore
25
6450
258
15 mm dia. nominal bore
1.5
224
149
Providing and fixing concealed in wall G.I. pipes medium class complete
with G.I. fittings and clamps, including painting with anti corrosive
bitumastic paint, cutting chases, making good the walls etc. and testing of
joints complete: 15 mm dia nominal bore
1.5
282
188
20 mm dia nominal bore
3
663
221
Providing and fixing gun metal non- return valve (vertical type) of
approved quality (screwed end) : 25 mm nominal bore
2
902
451
Providing and fixing stainless steel drain jali of approved make/quality.
2
102
51
Providing and fixing 15 mm nominal bore Brass bib/stop cock of
approved quality: Bib cock (350 grams)
4
948
237
Stop cock (600 grams)
1
237
237
Providing and fixing gun metal non- return valve (vertical type) of
approved quality (screwed end) : 25 mm nominal bore
2
902
451
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
500
3650
7.3
Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
2
3418
1709
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements